Relevant bibliographies by topics / Denture, Partial, Removable. Denture Precision Attachment / Journal articles

To see the other types of publications on this topic, follow the link: Denture, Partial, Removable. Denture Precision Attachment.

Journal articles on the topic 'Denture, Partial, Removable. Denture Precision Attachment'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Denture, Partial, Removable. Denture Precision Attachment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

Can, Gülsen, Baransel Özmumcu, and Pinar Altinci. "In vitro Retention Loss of Attachment-retained Removable Partial Denture." Journal of Contemporary Dental Practice 14, no. 6 (2013): 1049–53. http://dx.doi.org/10.5005/jp-journals-10024-1449.

Full text

Abstract:

ABSTRACT Aim To investigate the importance of attachment types on the retention loss of extracoronal attachment-retained removable partial dentures depending on the usage period. Materials and methods In order to observe the retention loss of 5 different attachments (OT Strategy, OT Strategy-metal protected, Vario-stud-snap and Vario-soft 3 and ERA-RV) over time, attachment-retained partial dentures representing Kennedy II mod. I case were placed in a custom-made, retention test machine. For each minute, eight separating and joining movements were performed and retention values (Newton) of the attachments were recorded by computer. The retention tests implemented in 540,1080 and 2160 cycles. The data were evaluated statistically according to the two-way ANOVA and Tukey parametrical tests. Results The slide type attachment providing the best retention force was observed to be the most worn out by this process (p < 0.01) while the ball type attachments, which typically have the lesser retention force, showed less retention loss (p < 0.01). Conclusion It can be concluded that the retention attributes of the attachment-retained dentures were affected by the specific type of precision attachment as well as the usage period. Clinical significance Precision attachments with ball-type plastic matrices may be recommended for the clinical use due to their retention stability over time. How to cite this article Can G, Özmumcu B, Altinci P. In vitro Retention Loss of Attachment-retained Removable Partial Denture. J Contemp Dent Pract 2013;14(6):1049-1053.

APA, Harvard, Vancouver, ISO, and other styles

Peter, Meekha, Mahantesh Bembalagi, and Hema Kanathila. "A Distinct Parallel Attachment System for the Rehabilitation of Kennedy’s Class 2 Partially Edentulous Arch – A Case Report." Journal of Evolution of Medical and Dental Sciences 10, no. 17 (2021): 1265–68. http://dx.doi.org/10.14260/jemds/2021/268.

Full text

Abstract:

Among the numerous techniques of oral rehabilitation, precision attachments are considered as a good treatment option in removable (RPD) as well as fixed partial dentures (FPD). Precision attachments enhance patient’s self-confidence and selfimage as they help in facilitating aesthetic, functional and retentive replacement of teeth that are missing in the oral cavity. They can improve the aesthetics by eliminating the clasp assembly in cast partial dentures (CPD). This particular case report explains the treatment sequence and approach for the utilisation of attachments in a Kennedy Class 2 situation. A successful removable partial denture includes a precise diagnosis with meticulous treatment planning. However, re-establishment of partially edentulous arch is particularly challenging in distal extension situations classified as Kennedy’s class 1 or 2 conditions.1 In such clinical cases, where a fixed prosthesis cannot be fabricated, a prosthodontist often suggests an implant retained prosthesis that is not routinely possible because of the insufficient available bone width and height.2 Thus to ensure functional and aesthetic substitution of lost teeth, an attachment secured RPD can be considered as a good treatment option in such cases. Attachments are constructed in a ready to place form (pre-fabricated) known as precision attachments. Another one is semi precision attachment where the segments have to be constructed by dentists or dental technicians because it requires casting for incorporating into fixed unit of restoration.3 Hence precision attachments are considered as possible alternatives when patients demand for a fixed restoration in distal extension cases. Various extra coronal attachments are available and used in distal extension cases. Preci-Sagix is considered as an ideal extra coronal attachment for removable partial dentures and also in over denture cases. It is accessible in two sizes, 1.7 mm mini or 2.2 mm standard and is selected according to the permitted space. The male component is available in three varieties, a plastic castable pattern (any hard alloy), cast to no prax (only non-precious alloy) and a threaded male and base ring (2.2 mm size only).4 These attachments produce vertical, horizontal and rotational movements during its function which supports the prosthesis by transferring harmful forces from the abutments to the supporting structures by its passive movement, which helps in the rehabilitation of distal extension cases.5 This case report explains restoration of partially edentulous arch by incorporating a Preci Sagix attachment in mandibular cast partial denture retained by a six-unit FPD and a maxillary conventional cast partial denture.

APA, Harvard, Vancouver, ISO, and other styles

Pandey, Bijay, S. P. Joshi, D. Thapa, and P. Shrestha. "Use of a Semi-Precision Attachment to Fabricate A Removable Partial Denture: A Case Report." Journal of Nepalese Prosthodontic Society 2, no. 2 (2019): 108–12. http://dx.doi.org/10.3126/jnprossoc.v2i2.31218.

Full text

Abstract:

Use of attachment in providing retention to removable prosthesis is an old treatment modality with better success. It highly improves the comfort, aesthetic, function, and patient satisfaction, especially in the patients with long span edentulism where implants and fixed partial denture (FPD) are not indicated and cast partial dentures are barely satisfactory. Proper diagnosis and treatment planning is necessary for selection of appropriate attachment type. A comprehensive evaluation, multi-disciplinary approach and sequential treatment planning is needed for long-term successful outcome. This case report describes the use of an extra coronal semi-precision attachment to enhance retention of removable prosthesis.

APA, Harvard, Vancouver, ISO, and other styles

Sukaedi, Sukaedi, and Eha Djulaeha. "Treatment of sharp mandibular alveolar process with hybrid prosthesis." Dental Journal (Majalah Kedokteran Gigi) 43, no. 3 (2010): 136. http://dx.doi.org/10.20473/j.djmkg.v43.i3.p136-140.

Full text

Abstract:

Background: Losing posterior teeth for a long time would occasionally lead to the sharpening of alveolar process. The removable partial denture usually have problems when used during mastication, because of the pressure on the mucosa under the alveolar ridge. Purpose: The purpose of this case report was to manage patients with sharp mandibular alveolar process by wearing hybrid prosthesis with extra coronal precision attachment retention and soft liner on the surface base beneath the removable partial denture. Case: A 76 years old woman visited the Prosthodontic Clinic Faculty of Dentistry Airlangga University. The patient had a long span bridge on the upper jaw and a free end acrylic removable partial denture on the lower jaw. She was having problems with mastication. The patient did not wear her lower denture because of the discomfort with it during mastication. Hence, she would like to replace it with a new removable partial denture. Case management: The patient was treated by wearing a hybrid prosthesis with extra coronal precision attachment on the lower jaw. Soft liner was applied on the surface of the removable partial denture. Hybrid prosthesis is a complex denture consisting of removable partial denture and fixed bridge. Conclusion: It concluded that after restoration, the patient had no problems with sharp alveolar process with her new denture, and she was able to masticate well.Latar belakang: Kehilangan geligi posterior dapat menimbulkan processus alveolaris tajam. Gigi tiruan sebagian lepasan mempunyai masalah selama pengunyahan karena adanya tekanan di mukosa di bawah alveolar ridge. Tujuan: Tujuan laporan kasus ini adalah untuk menjelaskan cara menangani pasien yang mempunyai prosesus alveolaris yang tajam di rahang bawah dengan dibuatkan protesis hybrid dengan daya tahan extra coronal precision attachment dan soft liner di permukaan bawah basis gigi tiruan sebagian lepasan. Kasus: Pasien wanita berumur 76 tahun datang di klinik Prostodosia Fakultas Kedokteran Gigi Universitas Airlangga. Pasien memakai gigi tiruan lekat rentang panjang di rahang atas dan gigi tiruan sebagian lepasan akrilik free end di rahang bawah, pasien mengalami masalah waktu mengunyah. Pasien tidak memakai gigitiruan lepasan rahang bawahnya karena tidak nyaman dipakai, dan pasien menginginkan pembuatan gigi tiruan lepasan rahang bawah yang baru. Tatalaksana kasus: Pada pasien ini dilakukan pembuatan Hybrid Prosthesis dengan daya tahan berupa extra coronal attachment di rahang bawah dan penggunaan bahan pelapis lunak yang diaplikasikan pada basis gigi tiruan lepasan nya. Hybrid prosthesis adalah gigi tiruan himpunan yang terdiri dari gigi tiruan lepasan dan gigi tiruan lekat. Kesimpulan: Hasil perawatan menunjukkan setelah mengganti gigi tiruan dengan gigi tiruan sebagian lepasan yang baru, pasien tidak mempunyai masalah dengan gigi tiruan yang baru akibat processus alveolaris yang tajam dan pasien dapat mengunyah dengan baik.

APA, Harvard, Vancouver, ISO, and other styles

Melina, Irene, Soekobagiono Soekobagiono, and Harry Laksono. "Kombinasi hybrid prosthesis dengan precision attachment pada kasus mahkota klinis pendek Hybrid prosthesis combined with precision attachment to overcome clinically short crown." Journal of Dentomaxillofacial Science 12, no. 2 (2013): 118. http://dx.doi.org/10.15562/jdmfs.v12i2.363.

Full text

Abstract:

In the case of losing many teeth and the residual teeth have short clinical crown, design of the denture may hybriddenture. Hybrid denture is a removable partial denture with metal frame which have retention in the form ofprecision attachment. In short clinical crown, placement of crowns and the use of traction can be a problem,because there is no or lack of retention. In the manufacture of hybrid denture with precision attachment retention,using abutment with short clinical crowns is contraindicated. But in some literatures mentioned that the rest of theclinical crown height of not less than 2 mm can still be used as an abutment, but the abutments must be modified,such as making a longer preparation towards cervical edge. In several studies and literature, it is mentioned that toimprove the retention of the crown, the axial wall of abutment must be 4-6°. This article is aimed to report the clinical success of using the hybrid denture on abutment teeth which have short clinical crowns in a patient woman

APA, Harvard, Vancouver, ISO, and other styles

Sadek, Sherif Aly. "Comparative Study Clarifying the Usage of PEEK as Suitable Material to Be Used as Partial Denture Attachment and Framework." Open Access Macedonian Journal of Medical Sciences 7, no. 7 (2019): 1193–97. http://dx.doi.org/10.3889/oamjms.2019.287.

Full text

Abstract:

BACKGROUND: Utilization of attachments in a removable partial denture is highly essential not only as a line of treatment but also as it has a remarkable impact on the denture’s durability during the function. The attachment should act as a stress breaking system preserving the abutment teeth. AIM: This consideration aimed to verify the convention of polyether ether ketone (PEEK) material as an attachment. MATERIAL AND METHODS: Four groups of different materials for both attachments and partial denture framework were fabricated and tested using strain gauges to compare between them according to the strains originated around both the abutment teeth and edentulous area. RESULTS: PEEK material is one of the esthetic materials used for fabrication of the framework of the RPD. On using it as a precision attachement is shows favorable stress distribution decreasing the strains around the abutment teeth and the alveolar ridge especially distal to the abutment teeth that was significantly reduced in comparison with the other treatment options. CONCLUSION: Utilization of PEEK material as both an attachment and framework decline the strains performed around the abutment teeth and over the edentulous ridge.

APA, Harvard, Vancouver, ISO, and other styles

D Prasad, Krishna, Chethan Hegde, Namrata G. Shah-Naidu, and Manoj Shetty. "Removable Partial Denture Design using Milled Surface as a Precision Attachment: An Esthetic Alternative." Journal of Orofacial Research 2 (July 2012): 182–85. http://dx.doi.org/10.5005/jp-journals-10026-1038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Lynch, Christopher D., and Patrick J. Quinn. "Emergency repair of a fractured dowel-retained precision attachment for a removable partial denture." Journal of Prosthetic Dentistry 86, no. 3 (2001): 320–21. http://dx.doi.org/10.1067/mpr.2001.117057.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Saneja, Ritu, Atul Bhatnagar, Nancy Raj, and Pavan Dubey. "Semiprecision attachment: a connecting link between the removable and fixed prosthesis." BMJ Case Reports 13, no. 8 (2020): e233744. http://dx.doi.org/10.1136/bcr-2019-233744.

Full text

Abstract:

Oral rehabilitation of partially edentulous arches requires careful treatment planning before any prosthodontic intervention. The connection of the metal framework of fixed (fixed dental prosthesis (FPD)) and removable partial denture using adhesive attachments is a good alternative prosthetic option when solely fixed prosthesis (FPD or implant) cannot be used due to anatomical limitation. Attachments are the tiny interlocking devices that act as a hybrid link to join removable prosthesis to the abutment and direct the masticatory forces along the long axis of the abutment. This joint acts as a non-rigid stress breaker, which helps in distributing the occlusal load. Precision and semiprecision attachment have always been bordered by an aura of mystery due to technique sensitive procedure and lack of knowledge. The following case describes a combined contemporary and conventional approach and treatment sequence with the use of attachments for the rehabilitation of partially edentulous arches.

APA, Harvard, Vancouver, ISO, and other styles

Munot, VimalKantilal, RameshP Nayakar, and Raghunath Patil. "Prosthetic rehabilitation of mandibular defects with fixed-removable partial denture prosthesis using precision attachment: A twin case report." Contemporary Clinical Dentistry 8, no. 3 (2017): 473. http://dx.doi.org/10.4103/ccd.ccd_117_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Shetty, Mallika S., Sanath Kumar Shetty, Suhaim Sayyed Karkala, Zahid Mohammed, and Tushar Milind Wankhede. "Prosthetic Management of a Posterior Ridge Defect Case with Fixed Removable Type of Hybrid Prosthesis - A Case Report." Journal of Evolution of Medical and Dental Sciences 10, no. 36 (2021): 3192–95. http://dx.doi.org/10.14260/jemds/2021/648.

Full text

Abstract:

The main aim of prosthetic dentistry is restoring the form, function, comfort and appearance of the patient by the placement of a prosthesis replacing the missing teeth and contiguous tissues.1 Various prosthetic options for partially edentulous patients include an interim removable partial denture (RPD) to a cast partial denture, a fixed dental prosthesis (FDP), and a more implant-retained prosthesis. However, FDP and implant-retained prosthesis are not always feasible, particularly in patients with excessive residual ridge resorption and jaw defects due to trauma and / or surgical ablation. In such a situation, a dentist may resort to another option of fixed-RPD prosthesis, to restore the defective hard and soft tissues to achieve natural aesthetics, phonetics, comfort, and better hygiene. This hybrid prosthesis fulfils the objectives of the rehabilitation such as support, stability, and retention characteristics similar to a fixed prosthesis and aesthetics and hygiene maintenance of a removable prosthesis.2,3,4,5 Any prosthesis designed or fabricated should be based on the prosthetic principles of support, stability, retention, and preservation of remaining structures.1 From the patient's perspective, retention is one of the important factors for its acceptability. These retentive options range from simple bar and clip attachments to more sophisticated spark erosion overdentures.6,7 Spark erosion prosthesis is technique sensitive, bulky, and requires expensive equipment.6,7 On the other hand, precision attachments provide better vertical support and stimulation to the underlying tissue through intermittent vertical massage.8 Treatment with a hybrid denture is an affordable choice to fulfil the patient's aesthetic demands along with providing a good prognosis for the prosthesis and preservation of the remaining dentition. This article presents two case reports of prosthodontic rehabilitation of a patient with mandibular defects using an attachment-retained fixed-removable hybrid prosthesis.

APA, Harvard, Vancouver, ISO, and other styles

Afify, Mohamed, M. Helmy, and N. Abbas. "Evaluation of Biting Force of New Design of Extracoronal Castable Precision Attachment versus Conventional Partial Denture for Treatment of Unilateral Mandibular Distal Extension Area: A Randomized Controlled Trial." Open Access Macedonian Journal of Medical Sciences 8, no. D (2020): 23–28. http://dx.doi.org/10.3889/oamjms.2020.3616.

Full text

Abstract:

PURPOSE: The aim of this study was to evaluate biting force of patients with unilateral mandibular distal extension area treated with two different designs of the removable partial denture (RPD), conventional RPD, and new design of extracoronal castable precision attachment (OT Unilateral attachment). MATERIALS AND METHODS: This study was conducted on 16 patients with unilateral mandibular distal extension area with the second premolar is the last abutment teeth. The patients were divided into two equal groups, Group I received conventional RPD, which provides cross arch stabilization and a double Aker clasp was fabricated. Group II received new design of extracoronal castable precision attachment (OT Unilateral attachment). Evaluation of biting force by loadstar sensor, patients of both groups were evaluated at the time of prosthesis insertion, 3, 6, and 1 year later. Statistical analysis performing one-way analysis of variance followed by Tukey’s post hoc test to compare between all follow-up periods within each group, comparison between two groups regarding each follow-up period was performed by independent t-test. RESULTS: Both treatments yielded better after-treatment summary when compared with the baseline; however, better results were obtained and showed a statistically significant increase in Group II (OT unilateral design), especially after 3, 6 months, and 1 year later. CONCLUSION: From the results of this study, it was concluded that: It is preferable to use the new design of extracoronal castable precision attachment (OT unilateral) being simpler, more comfortable to the patients and give high masticatory efficiency in the form of biting force than conventional RPD.

APA, Harvard, Vancouver, ISO, and other styles

Ram, Sabita M., Jyoti B. Nadgere, Naisargi P. Shah, and Ankita A. Nigam. "Management of Anterior Ridge Defect with Andrew's Bridge." Journal of Contemporary Dentistry 6, no. 3 (2016): 208–13. http://dx.doi.org/10.5005/jp-journals-10031-1173.

Full text

Abstract:

ABSTRACT Residual ridge deformity after tooth loss is an expected outcome. The treatment of a patient with a history of trauma with loss of teeth and ridge defect is a significant challenge. This article presents a case of Seibert's class III ridge defect in the maxillary anterior region, which was treated with a fixed-removable system, the Andrew's bridge, for economical and time constraints. It requires a castable bar and sleeve attachment, which provides precision and retention while seating. It is primarily indicated where abutments are capable of supporting a fixed partial denture, but residual ridge shows severe loss. How to cite this article Ram SM, Nigam AA, Nadgere JB, Shah NP. Management of Anterior Ridge Defect with Andrew's Bridge. J Contemp Dent 2016;6(3):208-213.

APA, Harvard, Vancouver, ISO, and other styles

Mamdouh, Rania Ibrahim, Nancy Nader El-Sherbini, and Yusr Omar Mady. "Treatment Outcomes Based on Patient’s Oral Health Related Quality of Life (OHRQoL) after Receiving Conventional Clasp or Precision Attachment Removable Partial Dentures in Distal Extension Cases: A Randomized Controlled Clinical Trial." Brazilian Dental Science 22, no. 4 (2019): 528–37. http://dx.doi.org/10.14295/bds.2019.v22i4.1819.

Full text

Abstract:

Purpose: To compare the effect of two treatment options in mandibular Kennedy class I cases regarding oral health related quality of life (OHRQoL) and the biting force, removable partial dentures retained by either precision attachment (PA-RPD) or clasps (C-RPD)Materials and methods: The study included 32 partially edentulous patients which 16 patients received PA-RPD (OT Cap Attachment) and 16 patients received C-RPD. All the patients in both groups were asked to fill the OHRQoL questionnaire after 1 week (baseline), 3 months, 6 months and 12 months after prosthesis insertion. Biting force was measured using the i-load Star Sensor one week, 3 months, 6 months and 1 year after partial denture insertion for all patients in both groups. Statistical analysis comprised Mann Whitney U test, Friedman’s test, Dunn’s test and Chi-square test.Results: The results of OHRQoL revealed that at the baseline, 3 months and 6 months the PA-RPD showed statistically significant lower mean total OHIP-14 score than the C-RPD. However, after 12 Monthes , there was no statistically significant difference between total OHIP-14 scores in the two groups. Concerning the biting force there was no statistically significant difference between the two groups.Conclusion: Within the limitations of this study it was concluded that the OHRQoL of both the PA-RPD and the C-RPD was comparable after 12 months. Similarly the biting force was the same for both treatment options.

APA, Harvard, Vancouver, ISO, and other styles

Hussain, Mehmood, Muhammad Imran Bucha, Tahir Ali, and Moin Khan. "DENTAL PROSTHESIS;." Professional Medical Journal 24, no. 05 (2017): 767–71. http://dx.doi.org/10.29309/tpmj/2017.24.05.1383.

Full text

Abstract:

Objectives: To provide various means of retention in dental prosthesis for cleftpatients. Study Design: It was a descriptive type of study. Place and Duration of study: Thestudy was carried out at Hamdard University Dental Hospital, Karachi. Total duration of this studywas three years. Materials and Methods: Total 30 patients were selected after taking consentby random sampling technique. The age range varies from 01 month to 45 years. Among 30patients, 19 were female while 11 were males. Special designed Performa was made and filledby getting all related information from patient/ attendants. Then various treatment optionswere discussed with the patient or attendant & with mutual consent prosthesis was fabricatedutilizing various method of retention. Results: Feeding plate was fabricated for five patients,in which retention is achieved through maximum extension of prosthesis, using elastic band,utilization of favorable undercuts. Conventional removable partial denture was fabricated for17 patients. Mainly retention was achieved through retainers, considering esthetics maximumnumber of clasp is incorporated. To get better patient’s compliance flexible removable partialdenture was fabricated for 03 patients while precision attachment was provided to one patient.Speech bulb prosthesis was fabricated for one patient, its retention was mainly achieved bymeans of Adam’s clasp. Seven patients were provided with fixed prosthesis, in four cases pinkporcelain was added in cervical area to further improve esthetics & retention. Mainly due tofinancial status & poor compliance from the patients, implant supported prosthesis was notprovided to any patient. Conclusion: Utilization of various means of retention brings betteradaptation of prosthesis in cleft patients.

APA, Harvard, Vancouver, ISO, and other styles

Goto, Y. "Custom precision attachment housings for removable partial dentures." Journal of Prosthetic Dentistry 88, no. 1 (2002): 100–102. http://dx.doi.org/10.1016/s0022-3913(02)00053-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Goto, Yoshihiro, and James S. Brudvik. "Custom precision attachment housings for removable partial dentures." Journal of Prosthetic Dentistry 88, no. 1 (2002): 100–102. http://dx.doi.org/10.1067/mpr.2002.127603.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Zhang, Hai, and Joseph E. Grasso. "A technique for repairing a removable partial denture attachment anchor." Journal of Prosthetic Dentistry 94, no. 3 (2005): 299–300. http://dx.doi.org/10.1016/j.prosdent.2005.06.003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Rushabh Kamdhar, Subhashree Rohinikumar, and Dhanraj Ganapathy. "Knowledge and Awareness of Precision Attachments among Dental Students." International Journal of Research in Pharmaceutical Sciences 11, SPL3 (2020): 802–5. http://dx.doi.org/10.26452/ijrps.v11ispl3.3023.

Full text

Abstract:

Significant reconstruction of damaged teeth requires a great deal of new and traditional treatment methods, and the design of attachment retained removable partial dentures is one such therapeutic approach in prosthodontics. Customized semi-precision fittings with partial dentures provide strength and enhanced aesthetics in situations with limited space. The objective of the study was to determine the knowledge and understanding of precision attachments amongst dental students. A descriptive survey was conducted among undergraduate and postgraduate dental students using a structured questionnaire. The questionnaire gathered information on the respondent's knowledge regarding the use of precision attachments among dental practitioners in dentistry. Out of the 100 students,60% of them believed that based on the geometric configuration and design of the attachment precision attachments can be classified as the key lock, 20% believed that they were classified as latch type attachments and the rest 20% believed that they were classified as ball and socket attachment. Out of the 100 students who took the survey, 80% believed that the advantages of using precision attachments were all except increasing the stress to abutment and 20% believed that the advantages were all except decreasing torsional forces. All the students who had taken part in the survey had moderate knowledge about the use of precision attachments in dentistry. More intensive educational and awareness initiatives should be undertaken to increase the awareness levels about precision attachments among dental students.

APA, Harvard, Vancouver, ISO, and other styles

Masumi, Shinichi, Mayumi Ozamoto, Masahiro Arita, et al. "Clinical Application of Dental Magnetic Attachment for Partial Denture : Construction of an Upper Removable Partial Denture without Clasp." Journal of the Kyushu Dental Society 49, no. 6 (1995): 539–45. http://dx.doi.org/10.2504/kds.49.539.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Misawa, Hiroko. "A Case Report of Removable Partial Denture with I-C Attachment." Nihon Hotetsu Shika Gakkai Zasshi 49, no. 2 (2005): 290–93. http://dx.doi.org/10.2186/jjps.49.290.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Chen, Guang Xia, Xiao Yan Zeng, Ze Min Wang, Kai Guan, and Chang Wen Peng. "Fabrication of Removable Partial Denture Framework by Selective Laser Melting." Advanced Materials Research 317-319 (August 2011): 174–78. http://dx.doi.org/10.4028/www.scientific.net/amr.317-319.174.

Full text

Abstract:

The removable partial denture framework is very complex in shape with many curved surfaces, which is a very important assistant tool in prosthodontics. Generally, frameworks are fabricated by single piece basing on mould by traditional cast technology, which has many shortages of multiple steps, time cost and defects such as sand adheres, inner holes, cracks and segregation etc. As a novel method, selective laser melting (SLM) rapid prototyping technology has the advantages of short manufacturing cycle, high precision and flexibility, simple fabrication arts, which can be used to replace the conventional cast technology in the areas of prosthodontics. A SLM system was designed and developed by ourselves, which is consisted of an Yb-fiber laser, an optical scanner, a powder coating device, a gas purification system and a control system, the process parameters were investigated systematically and optimized, finally fabricated removable partial denture frameworks with stainless steel and titanium materials successfully by using the SLM system under optimized parameters. The tests showed that the frameworks have an average dimension precision of ±0.172mm. The wearing experiments on the plaster mouth molds demonstrated the removable partial denture frameworks fabricated by SLM can be fully applied to clinic after some post- processing procedures.

APA, Harvard, Vancouver, ISO, and other styles

Uludag, Bulent, Serdar Polat, Volkan Sahin, Emre Tokar, and Gurkan Goktug. "A Technique for Fabrication of an Extracoronal Attachment-Retained Removable Partial Denture to Fit an Existing Fixed Partial Denture." Journal of Prosthodontics 21, no. 2 (2012): 138–40. http://dx.doi.org/10.1111/j.1532-849x.2011.00818.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Thapa, Dipak, and P. Shrestha. "Removable Prosthesis with Extra Coronal Attachment for the Management of Distal Extension Case: A Case Report." Journal of Nepalese Prosthodontic Society 1, no. 2 (2018): 100–104. http://dx.doi.org/10.3126/jnprossoc.v1i2.23869.

Full text

Abstract:

Even though dental attachments have a long successful history, many of the dental practioners are unaware about its benefits in daily clinical practice. It highly improves the comfort, aesthetic, function and patient satisfaction, especially in the patients with long span edentulism where implants and fixed partial denture (FPD) are not indicated and cast partial dentures are barely satisfactory. This case report describes the clinical and the laboratory steps for prosthetic rehabilitation of a patient with maxillary distal extension partially edentulism with cast partial denture using Preci Vertex attachments.

APA, Harvard, Vancouver, ISO, and other styles

Tomar, GulshanKumar, Mirna Garhnayak, SitansuSekhar Das, and Shelly Roy. "Cast Partial Denture Retained Using Precision Attachment – A Case Report." IOSR Journal of Dental and Medical Sciences 15, no. 07 (2016): 94–99. http://dx.doi.org/10.9790/0853-150759499.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Zavanelli, Adriana Cristina, José Vitor Quinelli Mazaro, Recardo Alexandre Zavanelli, Adérico Santana Guilherme, Jaqueline Barbosa Magalhães, and Leandro de Carvalho Cardoso. "Distal Extension Removable Partial Denture with Resilient Attachment Connected to an Anterior Fixed Implant-Supported Prosthesis: A Clinical Report." World Journal of Dentistry 3, no. 1 (2012): 87–90. http://dx.doi.org/10.5005/jp-journals-10015-1133.

Full text

Abstract:

ABSTRACT Background Considering the limited qualitative and quantitative bone in the posterior arch, this modality of prosthetic treatment could provide a positive emotional factor reestablished by immovability of the anterior fixed implant-supported segment. Objective This clinical report demonstrates the possibility of achieving positive results with a removable partial denture connected to an implant-supported fixed prosthesis associated to an extra resilient attachment. Clinical significance In cases of posterior mandibular and maxilla atrophy added to the patients desire against the bone graft, this kind of prosthetic treatment has an important place as an alternative. How to cite this article Zavanelli RA, Mazaro JVQ, Guilherme AS, Magalhães JB, de Carvalho Cardoso L, Zavanelli AC. Distal Extension Removable Partial Denture with Resilient Attachment Connected to an Anterior Fixed Implant-Supported Prosthesis: A Clinical Report. World J Dent 2012;3(1):87-90.

APA, Harvard, Vancouver, ISO, and other styles

Mohamed, Tarek, Osama Abdulmoneam Baraka, and Magdy Mostafa Badawy. "Comparison between Acetal Resin and Cobalt-chromium Removable Partial Denture Clasps: Effect on Abutment Teeth Supporting Structures." International Journal of Prosthodontics and Restorative Dentistry 1, no. 3 (2011): 147–54. http://dx.doi.org/10.5005/jp-journals-10019-1028.

Full text

Abstract:

ABSTRACT Statement of problem Acetal resin has been introduced as an esthetic partial denture clasp material. However, the effects of these clasps on the abutment teeth supporting structures were not clear. Purpose To evaluate the effects of acetal resin clasps on the abutment teeth supporting structures as compared to cobalt-chromium clasps. Materials and methods Twenty patients, 12 males and 8 females, with Kennedy class III modification I partially edentulous maxilla and dentulous mandibles were selected for this study. Patients were divided into two equal groups; group 1 received maxillary cobalt-chromium partial denture frameworks with acetal resin Akers clasps. Group 2 received maxillary partial denture with cobalt-chromium frameworks and Akers cobalt-chromium clasps. Crevicular fluid, epithelial attachment loss, and bone height and density of the abutment teeth were evaluated at partial denture insertion and after 6 and 12 months. Paired t-test was used at p ≤ 0.05 to assess the changes in the above parameters in each group. Student t-test was used to compare between the two groups. Results Crevicular fluid measurements were significantly higher in the first group than that in the second group. There were no differences in epithelial attachment loss between the two groups. There were significantly higher reductions in the bone height and in the bone density in the second group than that in the first group. Conclusion Acetal resin clasps were superior to cobalt-chromium clasps as produced fewer reductions in bone height and in bone density around the abutment teeth inspite of produced increase in the crevicular fluid. Clinical implications Since there were lesser reductions in bone height and in bone density around acetal resin clasp abutments, it could be used successfully to retain partial dentures. However, meticulous oral hygiene and proper insertion and removal of partial denture with acetal resin clasps were required to decrease gingival inflammation and crevicular fluid amount.

APA, Harvard, Vancouver, ISO, and other styles

Jain, Ashish R., and Jacob Mathew Philip. "Attachment-retained Unilateral Distal Extension (Kennedy's Class II Modification I) Cast Partial Denture." International Journal of Prosthodontics and Restorative Dentistry 2, no. 3 (2012): 101–7. http://dx.doi.org/10.5005/jp-journals-10019-1057.

Full text

Abstract:

ABSTRACT Attachment-retained removable partial denture (RPD) is not an outdated treatment modality. It is even more contemporary in today's appearance-oriented society than when it was first introduced. There is significant number of patients who could benefit from this treatment option, both short and long term. However, lack of proper knowledge, overwhelming number of attachments available in the market, multiple adjustments and repairs are making dentists reluctant to offer and provide attachment-retained RPD services. The purpose of this article is to provide an overview and a simplified approach to this treatment modality by way of a case report. How to cite this article Jain AR, Philip JM, Ariga P. Attachment-retained Unilateral Distal Extension (Kennedy's Class II Modification I) Cast Partial Denture. Int J Prosthodont Restor Dent 2012;2(3):101-107.

APA, Harvard, Vancouver, ISO, and other styles

Dula, Linda J., Enis F. Ahmedi, Zana D. Lila-Krasniqi, and Kujtim Sh Shala. "Clinical Evaluation of Removable Partial Dentures on the Periodontal Health of Abutment Teeth: A Retrospective Study." Open Dentistry Journal 9, no. 1 (2015): 132–39. http://dx.doi.org/10.2174/1874210601509010132.

Full text

Abstract:

The aim of this retrospective study was to evaluate the effect of removable partial dentures in periodontal abutment teeth in relation to the type of denture support and design of RPD in a five-year worn period. Methods : A total of 64 patients with removable partial dentures (RPDs), participated in this study. It were examined ninety-one RPDs. There were seventy-five RPDs with clasp-retained and sixteenth were RPDs with attachments. There were 28 females and 36 males, aged between 40-64 years, 41 maxillary and 50 mandible RPDs. For each subjects the following data were collected: denture design, denture support, and Kennedy classification. Abutment teeth were assessed for plaque index (PI), calculus index (CI), blending on probing (BOP), probing depth (PD), gingival recession (GR), tooth mobility (TM). Level of significance was set at p<0.05. Results : According to denture support of RPD, BOP, PD, PI, GR, CI and TM-index showed no statistically significant difference. Based on the denture design of RPD’s, BOP, PD, PI, CI, and TM-index proved no statistically significant difference. Except GR-index according to denture design confirmed statistically significant difference in RPD with clasp p<0.01. The higher values of all periodontal parameter as BOP, PD, PI, CI and TM were in patients with RPD’s with claps comparing with RPD’s with attachment. Conclusion : RPD’s with clasp increased level of gingival inflammation in regions covered by the dentures and below the clasp arms in abutment teeth.

APA, Harvard, Vancouver, ISO, and other styles

Bae, Eun-Bin, Seong-Jong Kim, Jae-Won Choi, et al. "A Clinical Retrospective Study of Distal Extension Removable Partial Denture with Implant Surveyed Bridge or Stud Type Attachment." BioMed Research International 2017 (2017): 1–7. http://dx.doi.org/10.1155/2017/7140870.

Full text

Abstract:

This study was performed to make comparative analysis of the clinical findings between the two different types of the implant-assisted removable partial dentures: removable partial dentures using implant surveyed bridge as an abutment (ISBRPD) and overdenture type of removable partial denture using implant attachment (IARPD). Implant cumulative survival rate, marginal bone resorption, probing depth, peri-implant inflammation, bleeding, plaque, calculus, and complications were evaluated on 24 patients who were treated with implants in conjunction with removable partial denture and have used them for at least 1 year (ISCRPD: n=12; IARPD: n=12). There was no failed implant and all implants were functioning without clinical mobility. Marginal bone loss of ISCRPD (1.44 ± 0.57 mm) was significantly lower than that of IARPD (p<0.05). There was no significant difference in probing depth, peri-implant inflammation, bleeding, and plaque between the two groups (p>0.05), while the calculus was significantly more observed in ISCRPD group than in IARPD group (p<0.05). The retention loss of IARPD was the most common complication. Within the limits of the present study, it was found that well-planned ISBRPD was clinically appropriate. Longitudinal and systematic clinical studies are necessary to confirm these results.

APA, Harvard, Vancouver, ISO, and other styles

Lynch, Christopher D., and Francis M. Burke. "An impression technique for optimal positioning of precision attachments for removable partial dentures." Journal of Prosthetic Dentistry 89, no. 6 (2003): 616–17. http://dx.doi.org/10.1016/s0022-3913(03)00181-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Melilli, Dario, Vinícius Felipe Wandscher, Leonardo Ciocca, et al. "Retention strength of ball-attachment titanium post for removable partial denture or overdenture." Brazilian Journal of Oral Sciences 19 (November 4, 2020): e208798. http://dx.doi.org/10.20396/bjos.v19i0.8658798.

Full text

Abstract:

Aim: To evaluate the retention of an endodontic titanium postwith a spherical head for removable partial denture or overdentureattachment according to surface treatment type. Methods: Sixtyhealthy single-rooted teeth, sectioned at the enamel/cementumjunction, were treated endodontically and steadily fixed in theembedding acrylic resin. The titanium posts were subdivided intofour groups: control, no surface treatment (Ctrl); posts with macroretentivegrooves (MR); air abrasion of the post surface (AB); andposts with macro-retentive grooves and air abrasion of the postsurface (MR+AB). The posts were luted in the root canal usingself-adhesive dual resin cement. Pull-out testing was performedusing a universal testing machine until complete detachment wasachieved. After pull-out testing, the metallic posts were examinedunder an optical microscope and the failures were classifiedbased on the cement distribution pattern on the extracted posts:0, no cement left on the post (cement/post failure); 1, postsurface partially covered by adhered cement (post/cement anddentin/cement mixed failure); 2, post surface completely coveredby cement (dentin/cement failure). The retention data wereanalyzed by one-way ANOVA, Bonferroni–Dunn test (p<0.05)and Weibull analysis. Results: AB showed the highest retentionvalue (485.37±68.36), followed by MR+AB (355.80±118.47), MR(224.63±42.54) and Ctrl (113.12 ± 51.32). AB and MR showedthe highest Weibull moduli. Conclusions: The data indicatedthat air abrasion alone could significantly increase the retentionof titanium posts/attachments for use with overdentures orremovable partial denture.

APA, Harvard, Vancouver, ISO, and other styles

Carmeen Coelho, Maban, Sunitha Naveen Shamnur, Nandeeshwar D.B, and Barath Panjanan Duraiswamy. "REHABILITATION OF MANDIBULAR ARCH USING CAST PARTIAL DENTURE AND FIXED TREATMENT MODALITY." International Journal of Advanced Research 8, no. 11 (2020): 600–604. http://dx.doi.org/10.21474/ijar01/12045.

Full text

Abstract:

Successful restoration can be done with plenty of contemporary and conventional treatment planning. Attachment retained partial dentures are one such kind of treatment modality in prosthodontics. Studies have also demonstrated that precision-attachment partials last longer, wear less, need fewer adjustments, look better, work better, less destructive, protect abutment teeth, and are easier to clean. In this case report patients functional and aesthetic expectations were met by using a combination of Porcelain fused to metal (PFM) restorations and semi-precision attachments.

APA, Harvard, Vancouver, ISO, and other styles

Gupta, Naveen, Abhilasha Bhasin, Parul Gupta, and Pankaj Malhotra. "Combined Prosthesis with Extracoronal Castable Precision Attachments." Case Reports in Dentistry 2013 (2013): 1–4. http://dx.doi.org/10.1155/2013/282617.

Full text

Abstract:

Satisfactory restoration in a patient with a partially edentulous situation can be challenging especially when unilateral or bilateral posterior segment of teeth is missing. Successful restoration can be done with various conventional and contemporary treatment options. One such treatment modality is attachment-retained cast partial dentures. This paper describes a case report of a patient with maxillary bilateral distal extension edentulous span restored with a cast partial denture having an extracoronal castable precision attachment (RHEIN 83 OT CAP attachments system).

APA, Harvard, Vancouver, ISO, and other styles

Mizutani, Hiroshi, Kazuo Nakamura, and Minoru Ai. "Follow-up Study of Removable Partial Denture with Magnetic Attachment by Questionnaire to Dentist." Nihon Hotetsu Shika Gakkai Zasshi 41, no. 6 (1997): 902–9. http://dx.doi.org/10.2186/jjps.41.902.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Ozcelik, Tuncer Burak, and Burak Yilmaz. "An alternative procedure for positioning a prefabricated extracoronal attachment in a removable partial denture." Journal of Prosthetic Dentistry 100, no. 3 (2008): 240–41. http://dx.doi.org/10.1016/s0022-3913(08)60188-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Tsai, Tsung-Po, and Yu-Fu Shen. "Simplified method for fabrication of a claspless removable partial denture using extracoronal resilient attachment." Journal of Prosthetic Dentistry 82, no. 1 (1999): 114–15. http://dx.doi.org/10.1016/s0022-3913(99)70137-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Stevenson, Robert B., William G. Wilson, and Charles V. Caponigro. "Attachment of swing-lock labial bar to an existing removable partial denture: A clinical report." Journal of Prosthetic Dentistry 60, no. 4 (1988): 409–11. http://dx.doi.org/10.1016/0022-3913(88)90237-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kotb, Ragia Saad Mohamed, Ahmed Gamal Ahmed Hassan, Emad Mohamed Tolba M. Agamy, and Gehan Fekry Mohamed. "Clinical Evaluation of the Effect of Implant-Supported and Implant Retained Distal Extension Removable Partial Dentures on the Supporting Structures." Open Access Macedonian Journal of Medical Sciences 9, no. D (2021): 170–78. http://dx.doi.org/10.3889/oamjms.2021.6757.

Full text

Abstract:

Objective: To evaluate and compare the effect of implant supported versus implant retained removable partial denture restoring Kennedy's class I cases on the supporting structures by measuring modified gingival index and probing depth for abutment teeth and implants. Subjects and Methods: Twelve patients; who had Kennedy class I mandibular partially edentulous ridge extending distal to the first or second premolar, were selected from the outpatient clinic, Prosthodontics Department, Faculty of Dentistry, Minia University. The patients were classified into two equal groups; according to the implant superstructures either dome shaped abutment or ball and socket attachment. Each Patient of both groups had two implants in second molar position (one in each side) and received removable partial denture of the same design. Patients were followed up for one year clinically. Group I: Six patients received RPD supported by dome shaped short abutments. Group II six patients received RPD retained by ball and socket attachments. Results: Results revealed that, there was no statistically significant difference between the two groups regarding modified gingival index and probing depth around the abutment teeth and implant abutment. Conclusion: The use of dome shaped abutment or ball and O-ring attachment have the same effect on gingival index and probing depth around natural abutments and implants in Kennedy class I mandibular situations.

APA, Harvard, Vancouver, ISO, and other styles

OLIVEIRA, Marianne Barbosa Salgado de, Maria Giulia Rezende PUCCIARELLI, José Fernando Scarelli LOPES, and Rafael D’Aquino TAVANO. "Removable partial denture with attachment as a treatment option in patients with cleft lip and palate." RGO - Revista Gaúcha de Odontologia 65, no. 4 (2017): 380–85. http://dx.doi.org/10.1590/1981-863720170002000153088.

Full text

Abstract:

ABSTRACT The rehabilitation treatment of patients with cleft lip and palate is lengthy and is carried out by various professionals from different areas of healthcare.To this end, planning and specialist knowledge are critical to the success of the treatment, in this way envisioning the aesthetic and functional rehabilitation of the individual in order to integrate them into society. This study consists of a literature review along with the report of a clinical case, demonstrating the treatment performed with the use of a removable partial denture using the abutment teeth treated with milled metal-ceramic crowns and the use of attachments, with a view to promoting the retention and stability of the prosthetic device. With the use of this system as a whole, aimed at improving the facial proportions due to the restoration of vertical dimension of occlusion and adequate lip support, features that are often not present in individuals with cleft lip and palate. In this work, we are seeking to underline the importance of scientific and technical knowledge, combined with a well-executed planning, in order to achieve successful treatment that restores function and aesthetics to the patient, thereby enabling their reintegration into society.

APA, Harvard, Vancouver, ISO, and other styles

Saito, M., Y. Miura, K. Notani, and T. Kawasaki. "Stress distribution of abutments and base displacement with precision attachment- and telescopic crown-retained removable partial dentures." Journal of Oral Rehabilitation 30, no. 5 (2003): 482–87. http://dx.doi.org/10.1046/j.1365-2842.2003.01092.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Radović, Katarina, Rade Živković, Jovana Kuzmanovic Pficer, Ljiljana Tihaček Šojić, and Aleksandra Milić Lemić. "Unilateral complex partial denture performance evaluation: 5 years follow up clinical study." Stomatoloski glasnik Srbije 65, no. 3 (2018): 140–47. http://dx.doi.org/10.2478/sdj-2018-0014.

Full text

Abstract:

Summary Introduction Removable partial denture (RPD) is common treatment option for unilateral partially edentulous patients not indicated for implant therapy. Unilateral complex partial denture (UCPD) could be an alternative approach to RPD treatment, but there is lack of evidence about UCPD treatment outcomes during the long-term clinical performance. The aim of this this study was to use periodontal, prosthodontic and participant satisfaction measures to evaluate the long-term clinical performance of UCPD. Material and methods This 5 year follow-up clinical study evaluated pocket probing depth (PPD) and vertical clinical attachment loss (CAL-V) of direct abutment (DA), indirect abutment (IA) and control teeth (CT). Also complications and failures of UCPD were analysed using questionnaire of participant satisfaction with UCPD (stability, comfort and manipulation). Results Evaluation of data showed that CAL-V and PPD significantly increased over time for DA, IA and CT (p<0.0001), but the tooth function (DA, IA and CT) did not significantly influence changes in PPD and CAL-V. The fracture of one abutment tooth and increase of the number of artificial teeth deformations (p=0.039) were observed after 5 years. Participant satisfaction with denture after 1 year and 5 years vs. 7 days was significantly improved. Conclusion Despite limitations of this clinical study and assuming regular oral maintenance with proper indication, UCPD might be considered as good treatment option for Kennedy II rehabilitation in patients not indicated for implant therapy or who cannot tolerate extensive RPD design.

APA, Harvard, Vancouver, ISO, and other styles

Ahmed, Naseer, Maria Shakoor Abbasi, Sara Haider, et al. "Fit Accuracy of Removable Partial Denture Frameworks Fabricated with CAD/CAM, Rapid Prototyping, and Conventional Techniques: A Systematic Review." BioMed Research International 2021 (September 6, 2021): 1–11. http://dx.doi.org/10.1155/2021/3194433.

Full text

Abstract:

Objective. Analyzing and comparing the fit and accuracy of removable partial denture (RPDs) frameworks fabricated with CAD/CAM and rapid prototyping methods with conventional techniques. Materials and Methods. The present systematic review was carried out according to PRISMA guidelines. The search was carried out on PubMed/MEDLINE, Cochrane collaboration, Science direct, and Scopus scientific engines using selected MeSH keywords. The articles fulfilling the predefined selection criteria based on the fit and accuracy of removable partial denture (RPD) frameworks constructed from digital workflow (CAD/CAM; rapid prototyping) and conventional techniques were included. Results. Nine full-text articles comprising 6 in vitro and 3 in vivo studies were included in this review. The digital RPDs were fabricated in all articles by CAD/CAM selective laser sintering and selective laser melting techniques. The articles that have used CAD/CAM and rapid prototyping technique demonstrated better fit and accuracy as compared to the RPDs fabricated through conventional techniques. The least gaps between the framework and cast ( 41.677 ± 15.546 μ m ) were found in RPDs constructed through digital CAD/CAM systems. Conclusion. A better accuracy was achieved using CAD/CAM and rapid prototyping techniques. The RPD frameworks fabricated by CAD/CAM and rapid prototyping techniques had clinically acceptable fit, superior precision, and better accuracy than conventionally fabricated RPD frameworks.

APA, Harvard, Vancouver, ISO, and other styles

Feinberg, Edward. "Precision Attachment Case Restoration With Implant Abutments: A Review With Case Reports." Journal of Oral Implantology 37, no. 4 (2011): 489–98. http://dx.doi.org/10.1563/aaid-joi-d-10-00009.1.

Full text

Abstract:

Abstract Passively retained precision attachment partial dentures have been used successfully on natural tooth abutments since the 1920s. However, the dental profession has not advocated their use with implant abutments. When used in the passive manner that has proven successful on natural tooth abutments, precision attachment cases on implant abutments can be an excellent treatment option. This type of case has been used successfully for more than 17 years and offers tremendous advantages over the conventional overdenture approach to removal restorations on implant abutments.

APA, Harvard, Vancouver, ISO, and other styles

Peršić, Sanja, Josip Kranjčić, Daniela Kovačević Pavičić, Vlatka Lajnert Mikić, and Asja Čelebić. "Treatment Outcomes Based on Patients’ Self-Reported Measures after Receiving New Clasp or Precision Attachment-Retained Removable Partial Dentures." Journal of Prosthodontics 26, no. 2 (2015): 115–22. http://dx.doi.org/10.1111/jopr.12395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Uludag, Bulent, Fehmi Gonuldas, Emre Tokar, and Volkan Sahin. "A Technique for Retrofitting a Metal Ceramic Crown to an Attachment-Retained Removable Partial Denture: A Clinical Report." Journal of Prosthodontics 24, no. 2 (2014): 164–67. http://dx.doi.org/10.1111/jopr.12204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Naser Khaki, Majid, and Arash Shishehian. "Stress Distribution in Natural Tooth and Implant Supported Removable Partial Denture with Different Attachment Types: A Photoelastic Analysis." Journal of Islamic Dental Association of IRAN 28, no. 1 (2016): 34–39. http://dx.doi.org/10.30699/jidai.28.1.34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Ayna, Emrah, Emine Göncü Başaran, and Köksal Beydemir. "Prosthodontic Rehabilitation Alternative of Patients with Cleft Lip and Palate (CLP): Two Cases Report." International Journal of Dentistry 2009 (2009): 1–4. http://dx.doi.org/10.1155/2009/515790.

Full text

Abstract:

Although patients with cleft lip and palate (CLP) are not seen regularly in general dental practice, this is a frequent congenital anomaly; approximately one in every 800 live births results in a CLP. The cause of CLP is unknown, but possible causes are malnutrition and irradiation during pregnancy, psychological stress, teratogenic agents, infectious agents (viruses), and inheritance. Most clefts are likely caused by multiple genetic and nongenetic factors. Prosthetic reconstruction of the anterior maxilla is important for these patients. This paper describes the prosthetic rehabilitation of two patients with CLP, 19-year-old and 21-year-old women, both with surgically treated CLP. In both, an examination revealed a residual palatal defect of mm and missing maxillary lateral incisors. The 19-year-old was treated with a fiber-reinforced composite resin-bonded fixed partial denture. The 21-year-old was treated with a removable partial denture with an extracoronal attachment system. The prosthetic rehabilitation of the two patients with CLP was evaluated clinically. In both, well-planned prosthetic, periodontal, and surgical therapy resulted in satisfactory function and esthetics, alleviating their deformities. With education and appropriate recall, the patients should be able to maintain their oral health.

APA, Harvard, Vancouver, ISO, and other styles

Batalha, A. E. F., and R. M. Araújo. "Development of removable partial dentures by using additive manufacture and casting processes." Archives of Materials Science and Engineering 1, no. 87 (2017): 33–40. http://dx.doi.org/10.5604/01.3001.0010.5969.

Full text

Abstract:

Purpose: This work aims to present a methodology developed for dimensional analysis of removable partial dentures, following a route with a model manufactured by additive manufacture and a further casting process of a Co-Cr alloy part. Design/methodology/approach: The method for designing and manufacturing removable partial dentures (RPD) is focused on their completely virtual design. They are manufactured with resin additive manufacturing chrome-cobalt cast alloys. A 3D image correlation scanner was used for dimensional and geometrical tolerance analysis. Findings: The prostheses manufactured by CAD-CAM route are more accurate than conventional ones, but they suffer distortion during the casting process. This distortion did not interfere with the patient's well-being or with the adaptation to the prosthesis. Research limitations/implications: The technique presented herein paper allows preparing better fitting prosthesis. Providing the best comfort and masticatory power. Practical implications: Improving the precision in the manufacturing process of a removable partial denture is very important for professional dentists and their patients. Originality/value: The proposed technique and the work approach provide the prosthesis preparation with shorter ambulatory time in addition to greater comfort to the patient.

APA, Harvard, Vancouver, ISO, and other styles

Yuzugullu, Bulem, Ozlem Acar, Burcak Kaya, and Muhammet Saka. "Prosthodontic Rehabilitation of Cleft Lip and Palate Patients using Conventional Methods: A Case Series." International Journal of Prosthodontics and Restorative Dentistry 3, no. 3 (2013): 120–24. http://dx.doi.org/10.5005/jp-journals-10019-1090.

Full text

Abstract:

ABSTRACT This case series describes prosthodontic management of seven cleft-lip-and-palate patients with different cleft deformities, gender and age. Patients were rehabilitated using conventional prosthesis. Five patients in whose maxillary arch was orthodontically expanded were treated with a combination of fixed and removable partial dentures with precision attachments. Two patients, who did not maxillary collapse were treated with metal-ceramic fixed-partial-dentures. All patients were followed up to two years. When there are limitations for secondary bone- grafting and implants, conventional approaches provide good physiologic, functional and esthetic outcomes with care taken to prevent maxillary relapse in treating these patients. How to cite this article Acar O, Kaya B, Saka M, Yuzugullu B. Prosthodontic Rehabilitation of Cleft Lip and Palate Patients using Conventional Methods: A Case Series. Int J Prosthodont Restor Dent 2013;3(3):120-124.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!