Relevant bibliographies by topics / Drop catcher

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Drop catcher'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Drop catcher.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Drop catcher"

1

Koroteev, A. A., A. N. Osiptsov, and E. S. Popushina. "A film flow in a drop catcher in space conditions." Proceedings of the Mavlyutov Institute of Mechanics 5 (2007): 235–40. http://dx.doi.org/10.21662/uim2007.1.028.

Full text
Abstract:
A non-isothermal film flow is considered, which is formed on the inner surface of a conical drop catcher on whose inlet a uniform stream of a droplet medium is supplied under open space conditions. For the regime of inertial deposition of droplets, under the assumption of small relative thickness of the film and the absence of droplets rebounced from the film surface asymptotic models of steady-state film flow are constructed and studied. For a slow isothermal flow, the shape and parameters of the film are found analytically. For a general case, a parameteric numerical study ща the velocity an
APA, Harvard, Vancouver, ISO, and other styles
2

Zhu, Yi-Li, and Zhong-Qiao Zheng. "The use of double-decker catcher bearing with face-to-face installed inner layer bearings." Modern Physics Letters B 31, no. 19-21 (2017): 1740012. http://dx.doi.org/10.1142/s0217984917400127.

Full text
Abstract:
In active magnetic bearing (AMB) system, the catcher bearings (CB) are indispensable to temporarily support the rotor from directly impacting the stators. In most cases, traditional CB cannot bear the ultra-high speed, vibrations and impacts after a rotor drop event. To address the shortcomings, a double-decker ball bearing (DDBB) with inner two face-to-face angular contact ball bearings are proposed to be used as CB in an AMB system, and the dynamic response of the rotor after a rotor drop event is experimentally analyzed. The results indicate that using a DDBB as a CB helps to reduce the fol
APA, Harvard, Vancouver, ISO, and other styles
3

Luis, Andreas, Daniel Wolo, and Insar Damopolii. "Rancang Bangun Penangkap Embun Untuk Meningkatkan Efisiensi Aplikasi Pengabut Air Sebagai Model Mitigasi Urban Heat Island Masa Depan." JURNAL SAINS TEKNOLOGI & LINGKUNGAN 8, no. 2 (2022): 192–203. http://dx.doi.org/10.29303/jstl.v8i2.368.

Full text
Abstract:
This research was conducted to develop a dew-catching vehicle that will be used to support the application of a water misting system. The dew catcher design is expected to overcome the problem of too large a mist grain diameter in low-pressure water misting applications. The study was conducted using a 110 psi pressure pump and ten nozzles measuring 0.3 mm that sprayed mist from a height of 2 M. In this study, and the dew catcher design used can overcome the disturbance of water droplets due to the production of too large mist grains at low pressure misting. The maximum temperature drop that c
APA, Harvard, Vancouver, ISO, and other styles
4

Xiao, J. J., and G. Shoup. "Sizing Wet-Gas Pipelines and Slug Catchers With Steady-State Multiphase Flow Simulations." Journal of Energy Resources Technology 120, no. 2 (1998): 106–10. http://dx.doi.org/10.1115/1.2795019.

Full text
Abstract:
The design of wet-gas pipelines and slug catchers requires multiphase flow simulations, both steady-state and transient. However, steady-state simulation is often inadequately conducted and its potential not fully utilized. This paper shows how mechanistic steady-state simulation models can be used to obtain not only pressure drop, liquid holdup and flow regime, but also to extract important operational information such as pig transit time, pig exit speed, liquid buildup rate behind the pig, and the time for the pipeline to return to a steady-state after pigging. A well-designed set of steady-
APA, Harvard, Vancouver, ISO, and other styles
5

Yili, Zhu, and Zhang Yongchun. "Optimal Design of Tolerance Ring in Double-Decker Catcher Bearing System." Open Mechanical Engineering Journal 9, no. 1 (2015): 618–23. http://dx.doi.org/10.2174/1874155x01509010618.

Full text
Abstract:
In an active magnetic bearing (AMB) system, the catcher bearings (CBs) are essential to protect the system in cases of AMB failure. On the basis of the former researches of double-decker catcher bearings (DDCBs), a tolerance ring is proposed to further improve the performance of DDCB. Firstly, the support model of DDCB supported by tolerance ring is established. Then numerical simulations are carried out to determine the design parameters of tolerance ring. Finally, the tolerance ring is manufactured according to the obtained parameters and relative experiments are carried out to verify the th
APA, Harvard, Vancouver, ISO, and other styles
6

Osiptsov, A. N., and E. S. Popushina. "Asymptotic model of slow three-dimensional liquid film flow in a space drop catcher." Fluid Dynamics 47, no. 6 (2012): 758–68. http://dx.doi.org/10.1134/s0015462812060087.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

RANSOM, David, Andrea MASALA, Jeffrey MOORE, Giuseppe VANNINI, and Massimo CAMATTI. "Numerical and Experimental Simulation of a Vertical High Speed Motorcompressor Rotor Drop onto Catcher Bearings." Journal of System Design and Dynamics 3, no. 4 (2009): 596–606. http://dx.doi.org/10.1299/jsdd.3.596.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

K.V.L., Narasinga Rao, Harsh Deora, Vikas Vazhayil, and Suresh Tatineni. "Spontaneous Recovery of Complete Foot Drop in Case of Lumbar Disk Herniation: Catcher in the Rye?" World Neurosurgery 122 (February 2019): 518–21. http://dx.doi.org/10.1016/j.wneu.2018.09.119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Seidabadi, Leila, Hossein Ghadamian, and Mohammad Aminy. "A Novel Integration of PCM with Wind-Catcher Skin Material in Order to Increase Heat Transfer Rate." International Journal of Renewable Energy Development 8, no. 1 (2019): 1. http://dx.doi.org/10.14710/ijred.8.1.1-6.

Full text
Abstract:
In this research, a comprehensive simulation study including 3-D Dynamic time-dependent has been performed for Phase Change Materials (PCMs) applicant as a thermal storage integrated with the wind-catcher-wall in order to reduce the temperature difference (As a sustainable cooling method) in the MATLAB open-source–code software. By means of 3-D Dynamic time-dependent, as a final finding, the temperature drop (Cooling purpose) was obtained 25 degrees at about 7 working hours. Passive cooling can be considered as a viable and attractive strategy for the sustainable concept, opposed to mitigation
APA, Harvard, Vancouver, ISO, and other styles
10

Тarasov, M. Yu, Е. A. Кlevtsov, and V. M. Тarasov. "Features of the technological calculation of the inlet separation plant with preliminary water discharge." Oil and Gas Studies, no. 5 (December 4, 2022): 121–31. http://dx.doi.org/10.31660/0445-0108-2022-5-121-131.

Full text
Abstract:
To ensure efficient separation of oil production wells with a high content of associated petroleum gas, inlet separation units are used, consisting of an inlet separator, which ensures the separation of the main amount of free gas from liquid, an oil and gas separator, in which free gas is finally separated from the liquid, and a separator-drop catcher, designed to prevent entrainment of droplet liquid with gas. When a gas-water-oil mixture with a high water content enters the plant, an oil and gas water separator can be used instead of an oil and gas separator, which makes it possible to carr
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Drop catcher"

1

Павленко, Іван Володимирович, Иван Владимирович Павленко, Ivan Volodymyrovych Pavlenko та ін. "Исследование вынужденных колебаний отбойных элементов газодинамического сепаратора". Thesis, Юго-Западный государственный университет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/43144.

Full text
Abstract:
У результаті розв'язання стаціонарної задачі гідроаеропружності для взаємодії газорідинного потоку з динамічними сепараційними елементами було визначено аналітичний вираз для форм вимушених коливань пружної пластини. У результаті чисельного моделювання взаємодії газорідинного потоку з динамічними выдбыйними елементами встановлено, що ефективність сепарації збільшується при розмірах крапель дисперсної фази більших за 10 мкм.<br>Виявлені недоліки статичних конструкцій сепараційних елементів і запропоновані шляхи їх усунення. Досліджено взаємодію газорідинного потоку з динамічними сепараційними е
APA, Harvard, Vancouver, ISO, and other styles
2

Ляпощенко, Олександр Олександрович, Александр Александрович Ляпощенко, Oleksandr Oleksandrovych Liaposhchenko та ін. "Моделювання процесів сепарації та розробка методики розрахунку трифазного сепаратора". Thesis, Одеська національна академія харчових технологій, 2015. http://essuir.sumdu.edu.ua/handle/123456789/41953.

Full text
Abstract:
На підставі розробленої фізичної моделі гідродинамічних процесів та в результаті проведених досліджень та моделювань доведено підвищення ефективності сепарації шляхом вдосконалення конструкції горизонтального трифазного сепаратора (встановлення шнекового дефлектора, жалюзійного блоку та газодинамічного бризковловлювача), а також запропоновано науковий підхід до інженерної методики для його розрахунку. За допомогою комп’ютерного моделювання визначено гідродинамічні параметри руху потоку у шнековому дефлекторі, удосконалено запропоновану конструкцію газодинамічного бризковловлювача шляхом вста
APA, Harvard, Vancouver, ISO, and other styles
3

Narayanaswamy, Ashwanth. "Study of Catcher Bearings for High Temperature Magnetic Bearing Application." Thesis, 2011. http://hdl.handle.net/1969.1/ETD-TAMU-2011-05-9509.

Full text
Abstract:
The Electron Energy Corporation (EEC) along with National Aeronautics and Space Administration (NASA) in collaboration with Vibration Control and Electro mechanics Lab (VCEL), Texas A & M University, College Station, TX are researching on high temperature permanent magnet based magnetic bearings. The magnetic bearings are made of high temperature resistant permanent magnets (up to 1000 degrees F). A test rig has been developed to test these magnetic bearings. The test rig mainly consists of two radial bearings, one axial thrust bearing and two catcher bearings. The test rig that the catc
APA, Harvard, Vancouver, ISO, and other styles
4

Van, Rensburg Jan Jacobus Janse. "Delevitation modelling of an active magnetic bearing supported rotor / Jan Jacobus Janse van Rensburg." Thesis, 2014. http://hdl.handle.net/10394/10662.

Full text
Abstract:
The problem addressed in this thesis is the delevitation modelling of an active magnetic bearing (AMB) supported rotor. A system model needs to be developed that models the highly non-linear interaction of the rotor with the backup bearings (BBs) during a delevitation event. The model should accurately predict forward and backward whirl as well as the system forces experienced. To this end, the severity of rotor delevitation events should be characterised. The contributions of the research include a more comprehensive model of a cross-coupled flexible rotor-AMB-BB system, a method to obtain re
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Drop catcher"

1

Hrsg.: Adam, J org, ed. Second aid: Doorstops, drip catchers and other symbiotic gadgets. This publication accompanies the Exhibition Helfershelfer - T urbremse, Tropfenf anger und Andere Obligate Symbionten. AV Edition GmbH, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stop, drop, roll: If your clothes catch fire. Ohio Dept. of Commerce, Division of State Fire Marshal, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Drop catcher"

1

Molina-Luque, Fidel. "“A drop of honey catches more flies than a gallon of gall”." In The New Social Contract Between Generations. Routledge, 2025. https://doi.org/10.4324/9781003626886-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Friston, Mark. "Road Traffic Insurers and Liability For Costs." In Friston on Costs, 4th ed. Oxford University Press, 2023. https://doi.org/10.1093/law/9780192869081.003.0063.

Full text
Abstract:
Abstract This chapter deals with the liability of road traffic insurers for orders for costs made against their insureds and other tortfeasors. It describes the insurance industry, which maintains a structure that is designed to ensure that victims of road traffic accidents (RTAs) are able to recover compensation. It also emphasizes how the insurance structure is not being applied in a way that is consistent with the directive and it is unlikely that any such issue would arise in the context of a dispute about costs. The chapter considers the insurance structure as a liability tree, which is i
APA, Harvard, Vancouver, ISO, and other styles
3

Wells, H. G. "Mr Bedford at Littlestone." In The First Men in the Moon, edited by Simon J. James. Oxford University Press, 2017. http://dx.doi.org/10.1093/owc/9780198705048.003.0021.

Full text
Abstract:
My line of flight was about parallel with the surface as I came into the upper air. The temperature of the sphere began to rise forthwith. I knew it behoved me to drop at once. Far below me, in a darkling twilight, stretched a great expanse of sea. I opened every window I could, and fell—out of sunshine into evening, and out of evening into night. Vaster grew the earth and vaster, swallowing up the stars, and the silvery translucent starlit veil of cloud it wore spread out to catch me. At last the world seemed no longer a sphere but flat, and then concave. It was no longer a planet in the sky,
APA, Harvard, Vancouver, ISO, and other styles
4

Bao, Yiqin, and Yuhan Wu. "Design and Implementation of Arduino-Based Intelligent Low Temperature Smoke Warning Bedside Lamp." In Frontiers in Artificial Intelligence and Applications. IOS Press, 2024. http://dx.doi.org/10.3233/faia231214.

Full text
Abstract:
Because the temperature change in many places is particularly fast, especially when sleeping at night, sometimes because the temperature suddenly drops very low, the indoor temperature is lower than the comfortable temperature that the human body can adapt to, at this time if people do not open the air conditioning and do not add the quilt it is easy to catch a cold, and if the smoke is too large, there will be fire, carbon monoxide leakage situation will be very dangerous. To solve these problems, this paper designs an Arduino-based intelligent low-temperature smoke warning bedside lamp. When
APA, Harvard, Vancouver, ISO, and other styles
5

Thomson, Peter. "Buryatia, in Black & White and Color." In Sacred Sea. Oxford University Press, 2007. http://dx.doi.org/10.1093/oso/9780195170511.003.0013.

Full text
Abstract:
The trail along the eastern shore of the Holy Nose south of our campsite is maybe a foot wide, just a narrow track of compacted leaves and dirt, a path that could just as easily have been made by centuries of hooves and paws as by shod human feet. And perhaps it was. I’ve walked such trails in the Arctic, etched into the tundra by caribou and wolves and musk oxen. It’s a humbling and exhilarating experience, the trails a simple but stark reminder that you are in someone else’s habitat and that humans are not the only species to have left their mark on the planet. This one weaves between thick-
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Drop catcher"

1

Kang, Xiao, and Alan Palazzolo. "Dynamic and Thermal Analysis of Rotor Drop on Sleeve Type Catcher Bearings in Magnetic Bearing Systems." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63662.

Full text
Abstract:
The catcher bearing is a crucial part of the magnetic bearing system. It can support the rotor when the magnetic bearing is shut down or malfunctioning and limit the rotor’s position when large vibration occurs. The sleeve bearing has the advantages of a relatively large contact surface area, simple structure and an easily replaced surface. There are already many applications of the sleeve type catcher bearings in the industrial machinery supported by the magnetic bearings. Few papers though provide thorough investigations into the dynamic and thermal responses of the sleeve bearing in the rol
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Jung Gu, and Alan Palazzolo. "Catcher Bearing Life Prediction Using a Rainflow Counting Approach." In ASME/STLE 2011 International Joint Tribology Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ijtc2011-61186.

Full text
Abstract:
Catcher bearings (CB) are an essential component for rotating machine with active magnetic bearings (AMBs) suspensions. The CB’s role is to protect the magnetic bearing and other close clearance component in the event of an AMB failure. The contact load, the Hertzian stress, and the sub/surface shear stress between rotor, races, and balls are calculated, using a nonlinear ball bearing model with thermal growth, during the rotor drop event. Fatigue life of the CB in terms of the number of drop events prior to failure is calculated by applying the Rainflow Counting Algorithm to the sub/surface s
APA, Harvard, Vancouver, ISO, and other styles
3

Takeyama, Daiki, Chikako Iwaki, Yoichi Onitsuka, and Mika Tahara. "Study on Thermal-Hydraulics Characteristics of the Flat and High-Thermal-Conductivity Core-Catcher." In 2018 26th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icone26-82046.

Full text
Abstract:
For mitigation of severe accident with core melting, core-catcher has been developed to catch and cool molten core. The core-catcher developed by Toshiba for Advanced Boiling Water Reactor was designed to be installed under Reactor Pressure Vessel (RPV) and catch molten core in basin with thermal-resistant material. It also has structure including risers and downcomers to generate natural circulation flow of cooling water. On the other hand, there is not enough space to install it in the existing plants due to the height of the inclined cooling channels. Then, we have been developing flat core
APA, Harvard, Vancouver, ISO, and other styles
4

Wilkes, Jason, Giuseppe Vannini, Jeff Moore, and David Ransom. "An Improved Catcher Bearing Model and an Explanation of the Forward Whirl/Whip Phenomenon Observed in Active Magnetic Bearing Transient Drop Experiments." In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-94594.

Full text
Abstract:
Though many approaches have been proposed in the literature to model the reaction forces in a catcher bearing (CB), there are still phenomena observed in experimental tests that cannot be explained by existing models. The following paper presents a novel approach to model a CB system. Some of the elements in the model have been previously introduced in the literature; however, there are other elements in the proposed model that are new, providing an explanation for the forward whirling phenomena that has been observed repeatedly in the literature. The proposed CB model is implemented in a fini
APA, Harvard, Vancouver, ISO, and other styles
5

Garshin, V. I., A. R. Lebedev, and S. E. Geraskova. "SIMULATION OF THE FLIGHT OF A DROP OF GALVANIC ELECTROLYTE IN AN INHOMOGENEOUS FIELD OF AN ELECTRIC CATCHER." In STATE AND DEVELOPMENT PROSPECTS OF AGRIBUSINESS. DSTU-PRINT, 2020. http://dx.doi.org/10.23947/interagro.2020.1.467-471.

Full text
Abstract:
The article shows the relations for modeling an inhomogeneous electric field and the flight path of a drop of galvanic electrolyte in it. Estimates are preliminary. Articles and patents of authors in which non-uniform fields are already used are given. A modified trajectory method is proposed for evaluating the effectiveness of trapping harmful electrolyte droplets.
APA, Harvard, Vancouver, ISO, and other styles
6

Dafyak, Longtong Abednego, Buddhika Hewakandamby, Ahad Fayyaz, and David Hann. "Taylor Bubbles of Viscous Slug Flow in Inclined Pipes." In Offshore Technology Conference. OTC, 2021. http://dx.doi.org/10.4043/31238-ms.

Full text
Abstract:
Abstract Unique structures are formed when gases and liquids flow simultaneously in pipelines. The geometric characteristics of these structures are fundamental parameters in intermittent flow regimes. The length of liquid slugs and Taylor bubbles are inputs to mechanistic and empirical models for pressure drop estimation, slug catcher sizing and determination of the periods of no or low liquid in pipelines. Although slug flow has been studied for decades, there still exists a lack of comprehensive understanding of flow structures dynamics due to the complex interactions between the gas and li
APA, Harvard, Vancouver, ISO, and other styles
7

Couper, Nathan, Robert Day, Patrick Renahan, Patrick Streeter, and Elizabeth DeBartolo. "Air Muscle Powered Ankle Foot Orthotic." In ASME 2013 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/sbc2013-14136.

Full text
Abstract:
Foot drop, a disorder that affects millions of people worldwide, is a broad term used to describe a neurological or muscular-skeletal condition that restricts an individual’s ability to dorsiflex — raise — their foot about the ankle joint. Common causes of foot drop are stroke, ALS (Lou Gehrig’s disease), MS, and injury. Unassisted, an individual with foot drop will have difficulty walking as the affected foot easily catches on obstacles. Foot drop causes clients to drag their toes on each step, greatly increasing the risk of a trip or fall.
APA, Harvard, Vancouver, ISO, and other styles
8

Mokhti, M. A., M. H. Tobiaany, S. N. Ishak, et al. "Versatile Intelligent Circulating Tool to Mitigate Drilling Risks in Highly Depleted Formations." In Offshore Technology Conference. OTC, 2025. https://doi.org/10.4043/35597-ms.

Full text
Abstract:
Abstract Drilling in depleted formations presents unique challenges, including differential sticking, and poor hole cleaning due to reduced carrying capacity of the drilling fluid. Wellbore stability issues can arise from changing fracture gradients, causing collapsed formation. Therefore, balancing mud weight is critical to prevent this from happening. Other uncertainty includes losses, which may trigger well control situation. This paper discusses the value presented to overcome these challenges by utilizing a versatile remotely activated downhole tool for flow diversion into the annulus to
APA, Harvard, Vancouver, ISO, and other styles
9

Pei, Yinan, Randy H. Ewoldt, Christopher M. Zallek, and Elizabeth T. Hsiao-Wecksler. "Revised Design of a Passive Hydraulic Training Simulator of Biceps Spasticity." In 2018 Design of Medical Devices Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/dmd2018-6881.

Full text
Abstract:
Spasticity is a common abnormal muscle behavior associated with neurological disorders and is characterized by speed-dependent increased tone in the affected muscle when induced by passive movement [1]. During the passive stretch of the muscle, additional unique clinical signs that accompany spasticity are (a) sudden increase in muscle tone at a certain joint position (catch angle), called the “catch”, (b) after the “catch”, a quick drop of muscle resistance, called the “release”, where (a) and (b) together are usually referred to as the “catch-release” behavior, and (c) limited range of motio
APA, Harvard, Vancouver, ISO, and other styles
10

Greenlee, Alison, Timothy Murray, Victor Lesniewski, Mark Jeunnette, and Amos G. Winter. "Design and Testing of a Low-Cost and Low-Maintenance Drip Irrigation Filtration System for Micro-Irrigation in Developing Countries." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-35351.

Full text
Abstract:
The cylindrical filters presently used in &lt;1000 m2 drip irrigation systems are frequently clogged, increasing pressure loss and lowering the flow rate through the filters. This work investigates the mechanisms for this clogging and proposes an alternative filtration design that would enable both more reliable and lower maintenance filtering. This proposed system is compatible with existing drip irrigation systems and could be made inexpensively with plastic bottle manufacturing equipment. To compare the proposed design to off-the-shelf options, a drip irrigation test setup was built to meas
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Drop catcher"

1

Bittmann, Felix. Academic track mismatch and the temporal development of well-being and competences in German secondary education. Verlag der Österreichischen Akademie der Wissenschaften, 2021. http://dx.doi.org/10.1553/populationyearbook2021.res5.1.

Full text
Abstract:
Formal education is one of the most influential predictors of professional success. As parents in Germany are aware of the importance of education, they often try to enable their children to enrol in the prestigious academic schooling track (Gymnasium). This explains why the transition recommendation made by the teacher after the fourth grade is sometimes ignored if the desired track was not recommended for a particular student. How the mismatch between the teacher’s recommendation and the parents’ choice of schooling for their child affects the child’s development is not sufficiently known. I
APA, Harvard, Vancouver, ISO, and other styles
2

Bryant, C. A., S. A. Wilks, and C. W. Keevil. Survival of SARS-CoV-2 on the surfaces of food and food packaging materials. Food Standards Agency, 2022. http://dx.doi.org/10.46756/sci.fsa.kww583.

Full text
Abstract:
COVID-19, caused by the SARS-CoV-2 virus, was first reported in China in December 2019. The virus has spread rapidly around the world and is currently responsible for 500 million reported cases and over 6.4 million deaths. A risk assessment published by the Foods Standards Agency (FSA) in 2020 (Opens in a new window) concluded that it was very unlikely that you could catch coronavirus via food. This assessment included the worst-case assumption that, if food became contaminated during production, no significant inactivation of virus would occur before consumption. However, the rate of inactiva
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Drop catcher' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography