Academic literature on the topic 'Manufacturabilité'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Manufacturabilité.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Manufacturabilité":
Kino-oka, Masahiro, Manabu Mizutani, and Nicholas Medcalf. "Cell manufacturability." Cell and Gene Therapy Insights 5, no. 10 (October 21, 2019): 1347–59. http://dx.doi.org/10.18609/cgti.2019.140.
Malec, Henry A. "Measuring manufacturability." Quality and Reliability Engineering International 9, no. 5 (September 1993): 399. http://dx.doi.org/10.1002/qre.4680090502.
LI, JIN, and HONG YI. "RESEARCH ON SHIP MANUFACTURABILITY AND EVALUATION METHOD." Journal of Advanced Manufacturing Systems 10, no. 01 (June 2011): 3–10. http://dx.doi.org/10.1142/s0219686711001916.
KELLY, M. J. "Nanotechnology and manufacturability." Nanotechnology Perceptions 7, no. 2 (July 30, 2011): 79–81. http://dx.doi.org/10.4024/n03ke11a.ntp.07.02.
KELLY, M. J. "Nanotechnology and manufacturability." Nanotechnology Perceptions 7, no. 2 (November 30, 2011): 95–103. http://dx.doi.org/10.4024/n05bo10a.ntp.07.02.
Bazrov, B. M., and A. A. Troitskii. "Manufacturability of Products." Russian Engineering Research 40, no. 8 (August 2020): 683–87. http://dx.doi.org/10.3103/s1068798x20080055.
KIMURA, Fumihiko. ""Manufacturability" and "Recyclability"." Journal of the Society of Mechanical Engineers 101, no. 954 (1998): 349–50. http://dx.doi.org/10.1299/jsmemag.101.954_349.
Margail, J. "SIMOX material manufacturability." Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 74, no. 1-2 (April 1993): 41–46. http://dx.doi.org/10.1016/0168-583x(93)95011-s.
Troitsky, Alexandr. "Design formulae of product design production manufacturability." Science intensive technologies in mechanical engineering 2020, no. 7 (July 16, 2020): 31–34. http://dx.doi.org/10.30987/2223-4608-2020-7-31-34.
Yeung, Y. C., and Kai Ming Yu. "Manufacturability of Fractal Geometry." Materials Science Forum 471-472 (December 2004): 722–26. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.722.
Dissertations / Theses on the topic "Manufacturabilité":
Wang, Zhiping. "Constructive generative design methods for qualified additive manufacturing." Thesis, Ecole centrale de Nantes, 2021. https://tel.archives-ouvertes.fr/tel-03670417.
Additive manufacturing (AM) technologies give more and more design freedom to designers and engi-neers to design and define highly complex geometries and material compositions. Due to a layer-by-layer processing, the constraints, methods, tools and processes of design in AM are different from that in traditional manufacturing processes. Traditional design methods and tools cannot meet the needs of design in AM. Therefore, a new re-search field, design for AM (DfAM), has emerged to serve this need. However, existing DfAM methods are either guidelines or pure computation-based, which have limited consideration of coupled constraints along the AM digital processing chain and are difficult to ensure manufactura-bility of design in AM. To obtain qualified design in AM, this research focuses on three typical existing problems in DfAM domain: Firstly, how to ensure manufacturability in (topology optimization) TO process? Secondly, how to design support structures with lightweight, easy-to-remove for post-processing and friendly heat-diffusion properties to ensure shape accuracy and improve surface roughness of printed parts? Finally, how to avoid accuracy loss in print-ing preparation of complex lattice structures and ensure their manufacturability in design?To solve the three identified problems, this research developed a set of new constructive genera-tive design methods: 1. CSG-based generative design method to ensure manufacturability in light-weight topology optimization; 2. Pattern-based constructive generative design method to optimize support structure design and 3. Toolpath-based inversed constructive design to directly ob-tain processing models of corresponding complex lattice or porous structures with qualified print-ing toolpaths. The three proposed methods can well embed AM process constraints, realize para-metric control and save computation cost in design process to obtain a set of candidate design solutions with ensured manufacturability. A set of comparison studies with existing DfAM meth-ods and a couple of experiment case studies in medical applications demonstrated the methods’ advantages. These constructive methods may have large application potential to be adopted as design and decision making tools for other industrial applications when qualified DfAM is required
Nowack, Mark Lorenz. "Design guideline support for manufacturability." Thesis, University of Cambridge, 1997. https://www.repository.cam.ac.uk/handle/1810/251628.
Pons, Solé Marc. "Layout regularity for design and manufacturability." Doctoral thesis, Universitat Politècnica de Catalunya, 2012. http://hdl.handle.net/10803/96983.
Shiau, Yea-Jou. "Web-enabled environment for manufacturability assessment." Thesis, Nottingham Trent University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.367157.
Ren, Feng. "STL toolkit-a manufacturability evaluation environment /." The Ohio State University, 1998. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487953567771012.
Li, Ye. "Manufacturability analysis for non-feature-based objects." [Ames, Iowa : Iowa State University], 2008.
Lee, Mern Keat. "Design for manufacturability of speed-reduction cam mechanisms." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=31056.
In this thesis, the design for manufacturability of planar speed-reduction cam mechanisms is studied. In particular, the thesis focuses on a speed reducer with a rotating follower to couple shafts of parallel axes, termed planar Speed-o-Cam. Principles of the design for manufacturability are applied to Speed-o-Cam and a unified method for obtaining the optimum parameters satisfying the curvature constraints and pressure-angle bounds is developed. These two factors are relatively important because Numerically Controlled and Computer Numerically Controlled machine tools could be very sensitive to changes of curvature of the workpiece, especially when milling complex shapes such as those of cam plates.
Cam-mechanism balancing is also studied because unbalance in a high-speed rotating element can cause severe vibrations and greatly affect the bearings and hence, the performance of the machine. This is done by not only adding counterweights, which unavoidably increase the weight and volume of the mechanism, but also by removing material.
Medani, Omar. "Distributed manufacturability assessment using STEP AP224 and XML." Thesis, University of Nottingham, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.418968.
Xu, Xu. "Optimizations of manufacturability and manufacturing in nanometer-era VLSI." Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2006. http://wwwlib.umi.com/cr/ucsd/fullcit?p3219776.
Title from first page of PDF file (viewed July 24, 2006). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references (p. 125-129).
Dechu, Sandeep. "Design for manufacturability and reliability of threshold logic gates /." Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1240704171&sid=23&Fmt=2&clientId=1509&RQT=309&VName=PQD.
Books on the topic "Manufacturabilité":
Balasinski, Artur. Design for Manufacturability. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-1761-3.
Anderson, David M. Design for Manufacturability. Second edition. | Boca Raton : Taylor & Francis, 2020.: Productivity Press, 2020. http://dx.doi.org/10.4324/9780429285981.
Clark, Raymond H. Printed circuit engineering: Optimizing for manufacturability. New York: Van Nostrand Reinhold, 1989.
Balasinki, Artur. Semiconductors: Integrated circuit design for manufacturability. Boca Raton, FL: CRC Press, 2012.
Yu, Bei, and David Z. Pan. Design for Manufacturability with Advanced Lithography. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-20385-0.
Kaul, Anupama B. Microelectronics to nanoelectronics: Materials, devices & manufacturability. Boca Raton, FL: Taylor & Francis, 2012.
Lampaert, Koen. Analog Layout Generation for Performance and Manufacturability. Boston, MA: Springer US, 1999.
Lampaert, Koen. Analog layout generation for performance and manufacturability. Boston: Kluwer Academic, 1999.
Lampaert, Koen, Georges Gielen, and Willy Sansen. Analog Layout Generation for Performance and Manufacturability. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4757-4501-6.
Kundu, Sandip. Nanoscale CMOS VLSI circuits: Design for manufacturability. New York: McGraw-Hill, 2010.
Book chapters on the topic "Manufacturabilité":
Sivaram, Srinivasan. "Manufacturability." In Chemical Vapor Deposition, 41–61. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4757-4751-5_3.
Shim, Seongbo, and Youngsoo Shin. "DSAL Manufacturability." In Physical Design and Mask Synthesis for Directed Self-Assembly Lithography, 15–24. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76294-4_2.
Ranđelović, Saša. "Manufacturability of Biomaterials." In Biomaterials in Clinical Practice, 633–58. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68025-5_24.
Marcoux, Phil P. "Design for Manufacturability." In Fine Pitch Surface Mount Technology, 265–83. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3532-4_12.
Anderson, David M. "Design for Manufacturability." In Design for Manufacturability, 3–36. Second edition. | Boca Raton : Taylor & Francis, 2020.: Productivity Press, 2020. http://dx.doi.org/10.4324/9780429285981-2.
Balasinski, Artur. "Classic DfM: From 2D to 3D." In Design for Manufacturability, 11–102. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_2.
Balasinski, Artur. "DfM at 28 nm and Beyond." In Design for Manufacturability, 103–203. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_3.
Balasinski, Artur. "New DfM Domain: Stress Effects." In Design for Manufacturability, 205–71. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_4.
Balasinski, Artur. "Closure and Future Work." In Design for Manufacturability, 273. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_5.
Anderson, David M. "Total Cost." In Design for Manufacturability, 321–41. Second edition. | Boca Raton : Taylor & Francis, 2020.: Productivity Press, 2020. http://dx.doi.org/10.4324/9780429285981-10.
Conference papers on the topic "Manufacturabilité":
Xue, Hua, Ed P. Huijbregts, and Jochen A. G. Jess. "Routing for manufacturability." In the 31st annual conference. New York, New York, USA: ACM Press, 1994. http://dx.doi.org/10.1145/196244.196435.
Billings, Daniel A. "Basic manufacturability interval." In Orlando '91, Orlando, FL, edited by Mohan M. Trivedi. SPIE, 1991. http://dx.doi.org/10.1117/12.45486.
Azam, Mohammed A., and William P. Holmes. "Design for Manufacturability." In ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0035.
Lavin, Mark, and Lars Liebmann. "CAD computation for manufacturability." In the 2002 IEEE/ACM international conference. New York, New York, USA: ACM Press, 2002. http://dx.doi.org/10.1145/774572.774635.
Zorian, Y., and J. A. Carballo. "T1: Design for Manufacturability." In 14th Asian Test Symposium (ATS'05). IEEE, 2005. http://dx.doi.org/10.1109/ats.2005.103.
"Session Tue - PM2 manufacturability." In 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). IEEE, 2016. http://dx.doi.org/10.1109/3dpeim.2016.7570557.
Kreischer, Cody B. "Aspheric design for manufacturability." In Optifab 2007. SPIE, 2007. http://dx.doi.org/10.1117/12.718752.
Akin, Omer. "Building Manufacturability and Robotics." In 5th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 1988. http://dx.doi.org/10.22260/isarc1988/0027.
Ma, Mark, Hyesook Hong, Yong Seok Choi, Chi-Chien Ho, Mark Mason, and Randy McKee. "Design, mask, and manufacturability." In Photomask Technology, edited by Wolfgang Staud and J. Tracy Weed. SPIE, 2004. http://dx.doi.org/10.1117/12.569309.
Farrell, Richard A., Erik R. Hosler, Gerard M. Schmid, Ji Xu, Moshe E. Preil, Vinayak Rastogi, Nihar Mohanty, et al. "Manufacturability considerations for DSA." In SPIE Advanced Lithography, edited by Thomas I. Wallow and Christoph K. Hohle. SPIE, 2014. http://dx.doi.org/10.1117/12.2048396.
Reports on the topic "Manufacturabilité":
Johnson, F. C. Frit 625 Manufacturability Study. Office of Scientific and Technical Information (OSTI), April 2019. http://dx.doi.org/10.2172/1510928.
Bruins, Henderikus B. High Speed Manufacturability Polymeric Tray. Fort Belvoir, VA: Defense Technical Information Center, November 2001. http://dx.doi.org/10.21236/ada423492.
Wang, Yu-Shan. Analog Statistical Design for Manufacturability. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.7477.
Montoya, Tracy Louise, Paul Gregory Meacham, David Perry, Robin S. Broyles, Steven Hickey, and Jacquelynne Hernandez. Flow Battery System Design for Manufacturability. Office of Scientific and Technical Information (OSTI), October 2014. http://dx.doi.org/10.2172/1160291.
Robbins, Joshua. Topology Optimization with a Manufacturability Objective. Office of Scientific and Technical Information (OSTI), October 2021. http://dx.doi.org/10.2172/1825357.
Jensen, W. A., and G. P. Spellman. Design for manufacturability evaluation: Composite NIF Pockel Cell body. Office of Scientific and Technical Information (OSTI), April 1994. http://dx.doi.org/10.2172/10145559.
Allen, C., R. Blazek, J. Desch, J. Elarton, D. Kautz, D. Markley, H. Morgenstern, R. Stewart, and L. Warner. Design specifications for manufacturability of MCM-C multichip modules. Office of Scientific and Technical Information (OSTI), June 1995. http://dx.doi.org/10.2172/83879.
Barbee, T., and D. McClure. Multilayer Foil Manufacturability Final Report CRADA No. TSV-1246-96. Office of Scientific and Technical Information (OSTI), February 2018. http://dx.doi.org/10.2172/1426080.
Tennery, V. J., and T. O. Morris. The Ceramic Manufacturability Center: A new partnership with US industry. Office of Scientific and Technical Information (OSTI), December 1993. http://dx.doi.org/10.2172/10170657.
Reeves, Tommy, Derek Golinghorst, Tyler Benzing, Morgan Findley, Joseph R. Vanstrom, and Jacek A. Koziel. Design and Manufacturability of an In-Field Cow/Calf Hutch. Ames: Iowa State University, Digital Repository, April 2018. http://dx.doi.org/10.31274/tsm416-180814-31.