Relevant bibliographies by topics / Nickel ferrite

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Nickel ferrite'

Author: Grafiati
Published: 4 June 2021
Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nickel ferrite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nickel ferrite"

1

Jovalekic, Cedomir, Aleksandar Nikolic, Maja Gruden-Pavlovic, and Miodrag Pavlovic. "Mechanochemical synthesis of stoichiometric nickel and nickel-zinc ferrite powders with Nicolson-Ross analysis of absorption coefficients." Journal of the Serbian Chemical Society 77, no. 4 (2012): 497–505. http://dx.doi.org/10.2298/jsc110302186j.

Full text
Abstract:
The interest in finding new methods for preparation of nickel ferrite (NiFe2O4) and nickel-zinc ferrite (NixZn1-xFe2O4) powders has recently increased, due to the fact that physical and chemical properties of these soft magnetic materials depend strongly on the preparation conditions. In this paper, powder samples of ferrites were obtained by: 1) classic sintering procedure (NixZn1-xFe2O4, x = 0.9) and 2) planetary mill synthesis (both NiFe2O4 and NixZn1-xFe2O4). Mechanochemical reaction leading to the formation of NixZn1-xFe2O4 (x = 1 and 0.9) spinel phase was monitored by SEM, TEM, and XRD.
APA, Harvard, Vancouver, ISO, and other styles
2

Lai, Lai Win. "Structural Analysis of Samarium Substitution on Nanocrystalline Nickel Ferrite." Bago University Research Journal Vol.7, No.1, no. 2017 (2017): 143–60. https://doi.org/10.5281/zenodo.3909536.

Full text
Abstract:
Nickel ferrite being one of the most important inverse spinal ferrite has a wide range of applications especially as microwave devices. Rare earth also makes possible the high technology world we live in today. So, Samarium, a rare earth metal, is used as a dopant material with various ratios along with the Nickel ferrite in this research. A series of Samarium substituted Nickel ferrites Ni (Smx Fe1-x)2 O4 with molar ratio (x=0.0000, 0.0125, 0.0250, 0.0375, and 0.0500) have been synthesized by the conventional solid-state reaction method.
APA, Harvard, Vancouver, ISO, and other styles
3

Al-Hilli, Muthafer F. "A comparison study of the Structural and magnetic properties of pure Ni metal and NiZnMn ferrite." Iraqi Journal of Physics (IJP) 17, no. 43 (2019): 18–25. http://dx.doi.org/10.30723/ijp.v17i43.418.

Full text
Abstract:
The magnetic properties of a pure Nickel metal and Nickel-Zinc-Manganese ferrites having the chemical formula Ni0.1(Zn0.4Mn0.6)0.9Fe2O4 were studied. The phase formation and crystal structure was studied by using x-ray diffraction which confirmed the formation of pure single spinel cubic phase with space group (Fd3m) in the ferrite. The samples microstructure was studied with scanning electron microstructure and EDX. The magnetic properties of the ferrite and nickel metal were characterized by using a laboratory setup with a magnetic field in the range from 0-500 G. The ferrite showed perfect
APA, Harvard, Vancouver, ISO, and other styles
4

Kruželák, Ján, Andrea Kvasničáková, Michaela Džuganová, Lenka Hašková, Rastislav Dosoudil, and Ivan Hudec. "Curing, Properties and EMI Absorption Shielding of Rubber Composites Based on Ferrites and Carbon Fibres." Polymers 15, no. 4 (2023): 857. http://dx.doi.org/10.3390/polym15040857.

Full text
Abstract:
In this work, magnetic soft ferrites, namely manganese–zinc ferrite, nickel–zinc ferrite and combinations of both fillers, were incorporated into acrylonitrile-butadiene rubber to fabricate composite materials. The total content of ferrites was kept constant—300 phr. The second series of composites was fabricated with a similar composition. Moreover, carbon fibres were incorporated into rubber compounds in constant amount—25 phr. The work was focused on investigation of the fillers on absorption shieling performance of the composites, which was investigated within the frequency range 1–6 GHz.
APA, Harvard, Vancouver, ISO, and other styles
5

Al-Senani, Ghadah M., Foziah F. Al-Fawzan, Rasmiah S. Almufarij, Omar H. Abd-Elkader, and Nasrallah M. Deraz. "Magnetic Behavior of Virgin and Lithiated NiFe2O4 Nanoparticles." Crystals 13, no. 1 (2022): 69. http://dx.doi.org/10.3390/cryst13010069.

Full text
Abstract:
A series of virgin and lithia-doped Ni ferrites was synthesized using egg-white-mediated combustion. Characterization of the investigated ferrites was performed using several techniques, specifically, X-ray Powder Diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and High-resolution transmission electron microscopy (HRTEM). XRD-based structural parameters were determined. A closer look at these characteristics reveals that lithia doping enhanced the nickel ferrite lattice constant (a), unit cell volume (V), stress (ε), microstrain (σ), and dislocation density (δ). It also enha
APA, Harvard, Vancouver, ISO, and other styles
6

Soni, Himanshi, Roberto Acevedo, S. Obad, and Bharat Kumar. "Structural, Magnetic, and Catalytic traits of Nickel Ferrite: A review." E3S Web of Conferences 588 (2024): 02012. http://dx.doi.org/10.1051/e3sconf/202458802012.

Full text
Abstract:
Ferrites are classified as a remarkable category of materials recognized for their extensive range of applications. Within the realm of ferrites, spinel ferrites are considered promising soft magnetic materials, exhibiting exceptional characteristics such as appropriate band gap, significant coercivity, elevated saturation magnetization, and enhanced thermal and electrical traits. Specifically, Nickel ferrites, which are categorized as spinel ferrites, constitute a type of magnetic materials that have attracted significant attention owing to their remarkable traits. This is the highly magnetic
APA, Harvard, Vancouver, ISO, and other styles
7

Parajuli, D., and K. Samatha. "Structural and cation distribution analysis of Nickel-Copper/Nickel-Magnesium Substituted Lithium Ferrites." BIBECHANA 21, no. 1 (2024): 74–82. http://dx.doi.org/10.3126/bibechana.v21i1.61270.

Full text
Abstract:
Lithium ferrite (Li0.5Fe2.5O4) shows significant promise in electrical and electronic engineering. It possesses a crystal spinel crystal structure denoted as AB2O4, with "A" and "B" representing specific tetrahedral and octahedral lattice sites respectively. Analysis of X-ray diffraction (XRD) patterns aligns well with the JCPDS card (no. 38-0259), confirming the spinel structure with the Fd3m space group. However, an additional peak at 211 in the basic lithium ferrite suggests a subtle Fd3m to the P4132 phase change with a minor secondary hematite phase. Investigating the cation distribution
APA, Harvard, Vancouver, ISO, and other styles
8

Kolhar, Priyanka, Basavaraja Sannakki, Meenakshi Verma, Prabhakar S.V., Mansoor Alshehri, and Nehad Ali Shah. "Synthesis, Characterization and Investigation of Optical and Electrical Properties of Polyaniline/Nickel Ferrite Composites." Nanomaterials 13, no. 15 (2023): 2223. http://dx.doi.org/10.3390/nano13152223.

Full text
Abstract:
Nickel ferrite nanoparticles are prepared by using a low-temperature self-propagating solution combustion method using urea as fuel. The prepared nickel ferrite nanoparticles were doped with polyaniline in the three different weight ratios of 10%, 30% and 50% by using an in situ polymerization method and by adding ammonium persulfate as an oxidizing agent. The obtained samples were characterized by using XRD, FTIR, SEM and a UV–visible spectrophotometer. XRD examined crystalline peaks of ferrites and amorphous peak of polyaniline and confirmed the formation of the composites. FTIR examined the
APA, Harvard, Vancouver, ISO, and other styles
9

Zeshana, Ramzan, Haidar Qamarb, and Muhammad Azam. "Structural, magnetic, and electrical study of Ca, Ni, and Zn substituted Co-Cd ferrite." Science of Sintering, no. 00 (2025): 26. https://doi.org/10.2298/sos250312026r.

Full text
Abstract:
Cobalt-cadmium ferrite nanoparticles have gained the attention of researchers due to their smaller particle size, high saturation magnetization, and high direct current (DC) resistivity. This study aimed to synthesize cobalt-cadmium nano ferrites doped with calcium, zinc, and nickel (CoCd1-xMxFe2O4, where M = Ca, Zn, and Ni) and to study the effect of calcium, zinc, and nickel on the properties of CoCdFe2O4. A chemical co-precipitation technique was used to synthesize the ferrite nanoparticles. Four different samples of cobalt cadmium ferrite nanoparticles were prepared and doped with calcium,
APA, Harvard, Vancouver, ISO, and other styles
10

Nikolaev, Evgeniy, Elena Nikolaevna Lysenko, Anatoly P. Surzhikov, and Anatoliy I. Kupchishin. "Investigation of Magnetic Phase Formation in Nickel-Zinc Ferrites by X-Ray Diffraction and Thermal Analysis." Materials Science Forum 1064 (June 17, 2022): 99–108. http://dx.doi.org/10.4028/p-gedvv4.

Full text
Abstract:
The magnetic spinel phase formation in Ni1-xZnxFe2O4 (x=0.1, 0.3, 0.5) nickel-zinc ferrite synthesized from mechanically activated NiO-ZnO-Fe2O3 mixture was studied by thermomagnetometry method, X-ray diffraction and saturation magnetization analyses. The initial reagents were activated via milling the mixture in a planetary ball mill at 500 and 1000 rpm. The Ni-Zn ferrites were synthesized at 950 °C for 4 hours using the solid-state technology. The correlation between the results obtained using above methods of testing ferrite was revealed. It was found that the magnetic spinel phase concentr
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nickel ferrite"

1

Souza, NatÃlia Dantas Gomes de. "Obtaining magnetic nanobiocompÃsitos consisting of galactomannan, glycerol and nickel ferrite and zinc." Universidade Federal do CearÃ, 2014. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=11766.

Full text
Abstract:
CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior<br>FundaÃÃo de Amparo à Pesquisa do Estado do CearÃ<br>Nos Ãltimos anos, um grande interesse na associaÃÃo de materiais magnÃticos e biolÃgicos tem sido relatado na literatura. A obtenÃÃo de novos compÃsitos constituÃdos de galactomanana (GM), nanopartÃculas magnÃticas (MNPs) de NiZn e glicerol (GL) foram produzidos em diferentes proporÃÃes com finalidade de potencializar as caracterÃsticas individuais de cada material para futuras aplicaÃÃes. Sendo assim, as propriedades estruturais, magnÃticas e dielÃtricas dos nanobiocompÃsitos for
APA, Harvard, Vancouver, ISO, and other styles
2

Channing, Amanda Chemical Sciences &amp Engineering Faculty of Engineering UNSW. "Inert anodes for aluminium electrowinning: nickel ferrite based cermets." Awarded by:University of New South Wales. Chemical Sciences & Engineering, 2007. http://handle.unsw.edu.au/1959.4/40686.

Full text
Abstract:
Greenhouse gases including carbon dioxide are formed by the consumption of carbon anodes during aluminium production, making it a major contributor to global emissions. This consumption necessitates replacement of the anodes in electrolysis cells every 2-3 weeks. A solution to the environmental and economic problems posed may be found in an inert anode which facilitates direct decomposition of alumina to aluminium and oxygen. Finding a material which is stable in the aggressive high temperature electrolyte poses a major materials engineering challenge. In this study, apparatus was designed a
APA, Harvard, Vancouver, ISO, and other styles
3

Karakas, K. Z., R. Boncukcuoglu, I. H. Karakas, and M. T. Yılmaz. "The Effect of pH in Nickel Ferrite Nanoparticles Synthesis by Hydrothermal Method." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35022.

Full text
Abstract:
In this study, NiFe2O4 nano particles was prepared with aqueous solutions of nickel nitrate and ferric nitrate salts. An appropriate ratio of solutions nickel nitrate and ferric nitrate were dissolved in deionized water and poured into a crucible. Later, polyethylene glycol 600 (PEG 600) was added to this mixture. Samples were adjusted to various pH values. In experiments, samples obtained by hydrothermal method were heat treated at 700 oC for 8 h to enhance their crystallinity and remove the residual organic materials. The structural and morphological properties of NiFe2O4 nano particle
APA, Harvard, Vancouver, ISO, and other styles
4

Karakas, Z. K., R. Boncukcuoglu, I. H. Karakas, and M. Ertugrul. "Investigation of the Effects of Reaction Temperature in NiFe2O4 Nanoparticles Synthesis by Hydrothermal Method." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35028.

Full text
Abstract:
In this experimental study was investigated the effect of reaction temperature in NiFe2O4 nanoparticles synthesis with hydrothermal method. An appropriate ratio of solutions nickel nitrate and ferric nitrate were dissolved in deionized water and poured into a crucible. Later, polyethylene glycol 600 (PEG 600) was added to this mixture. Samples were adjusted to pH 11 values using NaOH solution. Accordingly, experiments were made at 180, 200 and 250 oC, respectively. The other parameters, were fixed as reaction time 24 h and pH value 11. The structural and morphological properties of NiFe2
APA, Harvard, Vancouver, ISO, and other styles
5

Jatkar, Kasturie. "Measuring magnetization in Nickel Ferrite samples using odd and even harmonics." Thesis, Uppsala universitet, Molekyl- och kondenserade materiens fysik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-411159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Okatan, Mahmut Baris. "Microstructure Development In Nickel Zinc Ferrites." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/3/12606924/index.pdf.

Full text
Abstract:
Nickel zinc ferrites (NZF) have been considered as one of the basic components in high frequency electromagnetic applications especially in the field of telecommunications. In the present study, the aim was to produce high quality nickel zinc ferrite ceramics at low soaking temperatures. For this purpose, conventional ceramic manufacturing method based on mixed oxide precursors was followed using calcium fluoride, CaF2, as sintering additive. During the sintering studies, it was noticed that both the microstructure and the electromagnetic properties of the NZF ceramics were modified to a gre
APA, Harvard, Vancouver, ISO, and other styles
7

Karakas, K. Z., R. Boncukcuoglu, I. H. Karakas, and M. T. Yılmaz. "The Effect of Calcination Temperature in NiFe2O4 Nanoparticles Synthesis with Microvawe Combustion Method." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35025.

Full text
Abstract:
Magnetic ferrites are a group of technologically important magnetic materials. Synthesis of nanocrystalline spinel ferrite has been investigated intensively in recent years due to their potential applications in high-density magnetic recording, microwave devices, and magnetic fluids In this study, NiFe2O4 nano particles were prepared with microvawe combustion methods. In experiments, samples obtained by microvawe method were calcined at various temperatures. The structural and morphological properties of NiFe2O4 nano particles was determined by X-ray powder diffraction (XRD) and Scanning
APA, Harvard, Vancouver, ISO, and other styles
8

Neumann, James 1958. "THE INITIATION AND PROPAGATION OF HERTZIAN AND RADIAL CRACKS IN NICKEL-ZINC FERRITE." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/276523.

Full text
Abstract:
This investigation was initiated by IBM to determine the types of cracks formed in hot-isostatic-pressed (HIP) Ni-Zn ferrite under impact and static loading conditions. A 1/8-inch tungsten carbide (WC) ball was used to apply the load in both cases. The impact loading condition was accomplished by dropping the WC ball from various heights between 40 and 200 cm. The static loading condition was accomplished by applying loads of 10 kg, 15 kg, and 30 kg on a Rockwell Hardness Tester. The response of HIP Ni-Zn ferrite to impact and static loading was elastic/plastic yielding permanent indentations.
APA, Harvard, Vancouver, ISO, and other styles
9

Brachwitz, Kerstin. "Defekt-induzierte Leitungsmechanismen und magnetische Eigenschaften spinellartiger Ferrite." Doctoral thesis, Universitätsbibliothek Leipzig, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-141251.

Full text
Abstract:
Im Rahmen dieser Arbeit wurde der Einfluss von Defekten auf die Eigenschaften von Ferrit-Dünnfilmen untersucht. Die Dünnfilme wurden mit Hilfe von gepulster Laserabscheidung bei verschiedenen Züchtungsparametern hergestellt. Durch Variation der Substrattemperatur und des Sauerstoffpartialdrucks wurden Dünnfilme verschiedener kristalliner Qualität gezüchtet. Diese wurden hinsichtlich ihrer chemischen Komposition mit Hilfe von energie-dispersiver Röntgenspektroskopie und Röntgenphotoelektronenspektroskopie untersucht. Durch Korrelation der Ergebnisse mit Messungen zum zirkularen magnetischen Rön
APA, Harvard, Vancouver, ISO, and other styles
10

Kenfack, Flaurance. "Complex oxides of the system Cu-Ni-Fe-O: synthesis parameters, phase formation and properties." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2004. http://nbn-resolving.de/urn:nbn:de:swb:14-1105366432765-06401.

Full text
Abstract:
This thesis describes the convenient routes and the preparation conditions (temperature, oxygen partial presssure) which lead to the formation of single phase materials within the quaternary system Cu-Ni-Fe-O. The investigated compositions are the solid solutions CuxNi1-xFe2O4, the ferrites occurring in the phase triangle Cu0.5Ni0.5Fe2O4 -Cu0.9Fe2.1O4 - Cu0.5Fe2.5O4 and some copper-nickel oxide solid solutions. Three synthesis routes have been used, namely (i) the preparation and the thermal decomposition of freeze-dried carboxylate precursors, (ii) the preparation and the oxidation of interme
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Nickel ferrite"

1

Kazuhisa, Miyoshi, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Humidity effects on adhesion of nickel-zinc ferrite in elastic contact with magnetic tape and itself. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kinkaid, James. Wabash Nickel Plate DT&I: Color guide to freight and passenger equipment. Morning Sun Books, Inc., 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pigram, A. J. The use of novel fabrication routes for the production of manganese-zinc and nickel-zinc ferrites. UMIST, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

N, Gunn Robert, ed. Duplex stainless steels: Microstructure, properties and applications. Abington Publishing, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

International Conference, Duplex Stainless Steels (4th 1994 Glasgow, Scotland). Papers presented at the fourth International Conference, Duplex Stainless Steels: Glasgow, Scotland, 13-16 November, 1994. Abington Publishing, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lange, Heinrich. Verfahren Zur Bestimmung der Gleich- und Wechselfeldmagnetisierung Kleiner Proben. Untersuchungen Im System der Nickel-Zink-Ferrite. VS Verlag fur Sozialwissenschaften GmbH, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Biggins, Dean E., and David A. Eads. Evolution, natural history, and conservation of black-footed ferrets. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198759805.003.0015.

Full text
Abstract:
Black-footed ferrets were reduced to a remnant population of 10 in 1985 due to diseases (plague, canine distemper), but successful captive breeding and releases have improved the prospects for ferret recovery. Comparisons between black-footed ferrets and Siberian polecats, close relatives that can interbreed and produce fertile offspring, allow the following evolutionary speculation. Predation on ferrets and polecats tends to narrow their niches and promote specialization due to requirements for escape habitats. In Asia, that influence is countered by the larger and more diverse area of steppe
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nickel ferrite"

1

Costa, Ana Cristina F. M., L. Gama, M. R. Morelli, and Ruth H. G. A. Kiminami. "Nickel Ferrite: Combustion Synthesis, Characterization and Magnetic Properties." In Advanced Powder Technology IV. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-984-9.618.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Condolf, Cyril, Armand Gabriel, Alexander Pisch, and Claude Carry. "Thermodynamic Sintering and Microstructure of Nickel Ferrite Based Material." In Advances in Science and Technology. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-01-x.45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Olsen, Espen, and Jomar Thonstad. "The Behaviour of Nickel Ferrite Cermet Materials as Inert Anodes." In Essential Readings in Light Metals. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48200-2_148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Olsen, Espen, and Jomar Thonstad. "The Behaviour of Nickel Ferrite Cermet Materials as Inert Anodes." In Essential Readings in Light Metals. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118647745.ch148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ishizaka, Kazuhiro, Yoshiaki Kinemuchi, Tsuneo Suzuki, Hisayuki Suematsu, Weihua Jiang, and Kiyoshi Yatsui. "Synthesis of Nickel Ferrite Nanosize Powders by Pulsed Wire Discharge." In Surface Engineering. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118788325.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kumari, Kanchan, Rajesh Kumar, and Partha Bir Barman. "Thickness Dependent Morphological, Structural, and Magnetic Studies of Nickel Ferrite Films." In Advances in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0942-8_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Xiao, Guangchun Yao, Yihan Liu, Jia Ma, and Zhigang Zhang. "Effects of the Additive ZrO2on Properties of Nickel Ferrite Cermet Inert Anode." In Light Metals 2011. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118061992.ch191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Xiao, Guangchun Yao, Yihan Liu, Jia Ma, and Zhigang Zhang. "Effects of the Additive ZrO2 on Properties of Nickel Ferrite Cermet Inert Anode." In Light Metals 2011. Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48160-9_191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ramalho, M. A. F., Ana Cristina F. M. Costa, L. Gama, et al. "Nanosize Nickel Ferrite Particles Synthesized by Combustion Reaction: Evaluation of Two Synthesization Routes." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-423-5.637.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sankaran, K. J., U. Balaji, and R. Sakthivel. "Magnetic and LPG Sensing Properties of Nickel Ferrite Nanoparticles Derived from Metallurgical Wastes." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-7264-5_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nickel ferrite"

1

Saha, Sujoy, Sabita Acharya, and Gopalan Srinivasan. "A Self-Biased Strontium Ferrite-Nickel Ferrite Compostite and PZT Bilayer for Magnetic Field Sensors." In 2024 IEEE SENSORS. IEEE, 2024. https://doi.org/10.1109/sensors60989.2024.10784531.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kent, R. K., and T. F. Archbold. "Electrochemical Measurements and Analysis of Alloyed Ductile Cast Iron." In CORROSION 1987. NACE International, 1987. https://doi.org/10.5006/c1987-87268.

Full text
Abstract:
Abstract Corrosion failures of ductile cast iron pipe have been an increasing problem in recent years. This paper examines the corrosion of ferritic ductile cast iron and also presents a method of reducing the rate of corrosion in acidic water. Through microanalysis of pipe failures and scanning electron microscopy of corroded samples, the mode of corrosion was found to be a type of accelerated pitting by a galvanic process between the ferrite matrix and carbon nodules. During the corrosion process, the graphite does not form a low strength layer such as that observed with gray cast iron, but
APA, Harvard, Vancouver, ISO, and other styles
3

Large, D., F. Scandella, A. Robineau, et al. "Welding of Lean Duplex Stainless Steel Grades: Microstructure, Corrosion Resistance and Mechanical Properties." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01097.

Full text
Abstract:
Abstract Recent price fluctuations of raw materials such as chromium and nickel have led to the development of stainless steel grades containing less nickel, which are known as lean duplex stainless steels. A research project has been initiated involving stainless steel manufacturers and end-users in order to study the weldability and properties of such grades. Investigations have been carried out on three lean duplex grades: UNS S32101, UNS S32202 and UNS S32304. Test pieces have been welded using several arc welding processes: Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding (GMAW) usi
APA, Harvard, Vancouver, ISO, and other styles
4

Yau, Yung-Herng, and Michael A. Streicher. "Galvanic Corrosion of Duplex-Fe-Cr-10%Ni Alloys in Reducing Acids." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85228.

Full text
Abstract:
Abstract The effect on corrosion of composition and microstructure in a series of Fe-Cr-10%Ni alloys with increasing chromium content has been investigated in reducing acids. In the range of 25 to 35% Cr there is a wide variation in the relative amounts of ferrite and austenite. In reducing acids (H2SO4, HCl) there is preferential attack on the ferrite phases. However, the rate of attack on ferrite is considerably greater than expected on the basis of its chromium and nickel contents alone. This is because corrosion on the ferrite phase is significantly increased by galvanic action with the au
APA, Harvard, Vancouver, ISO, and other styles
5

Kumar, Rajinder, Hitanshu Kumar, Ragini Raj Singh, and P. B. Barman. "Structural analysis of emerging ferrite: Doped nickel zinc ferrite." In ADVANCED MATERIALS AND RADIATION PHYSICS (AMRP-2015): 4th National Conference on Advanced Materials and Radiation Physics. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4929219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Singh, Prachi, and Deepshikha Rathore. "A biosensor system using nickel ferrite nanoparticles." In INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC 2015): Proceeding of International Conference on Condensed Matter and Applied Physics. Author(s), 2016. http://dx.doi.org/10.1063/1.4946310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kurian, Manju, Divya S. Nair, P. Predeep, Mrinal Thakur, and M. K. Ravi Varma. "Synthesis and Characterization of Nickel Zinc Ferrite." In OPTICS: PHENOMENA, MATERIALS, DEVICES, AND CHARACTERIZATION: OPTICS 2011: International Conference on Light. AIP, 2011. http://dx.doi.org/10.1063/1.3643621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Isha, S., M. Najim, P. Smitha, D. Singh, and G. D. Varma. "Microwave absorption properties of nanostructured nickel ferrite." In 2014 International Conference on Electronics and Communication Systems (ICECS). IEEE, 2014. http://dx.doi.org/10.1109/ecs.2014.6892701.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Singh, H. S., and Neha Sangwa. "Structural analysis of aluminium substituted nickel ferrite nanoparticles." In 2ND INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC 2017). Author(s), 2018. http://dx.doi.org/10.1063/1.5032385.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yin, Wong Swee, Jumiah Hassan, Mansor Hashim, A. K. Yahya, and Shah Alam. "Morphological and Dielectric Properties of Nickel-Zinc Ferrite." In PROGRESS OF PHYSICS RESEARCH IN MALAYSIA: PERFIK2009. AIP, 2010. http://dx.doi.org/10.1063/1.3469670.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nickel ferrite"

1

Kichukova, Diana, Radostina Ivanova, Momchil Dimitrov, et al. Novel RGO-supported Nickel-Zinc Ferrite Catalyst for Hydrogen Production from Methanol. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, 2020. http://dx.doi.org/10.7546/crabs.2020.10.06.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gray. L51567 Influence of Filler Wire Carbon and Residual Element Content on the Mechanical Properties. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010565.

Full text
Abstract:
This study was conducted to determine the interactive roles of carbon, oxygen, and nitrogen and residual elements such as titanium, chromium, copper, sulfur, phosphorous, aluminum, tin, antimony, and arsenic on weld metal mechanical properties in pipeline steels. Eleven seamless, flux-core electrodes were fabricated with varying compositions and deposited in girth welds in a 24-inch diameter, API 5LX-65 pipe using the gas-metal-arc-weld (GMAW) process. The results of Charpy V-notch and crack-tip opening displacement tests indicate that desirable toughness properties may require the addition of
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nickel ferrite' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography