Relevant bibliographies by topics / Polymer failure

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Polymer failure'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Polymer failure.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Polymer failure"

1

Spathis, G., and E. Kontou. "Creep failure time prediction of polymers and polymer composites." Composites Science and Technology 72, no. 9 (2012): 959–64. http://dx.doi.org/10.1016/j.compscitech.2012.03.018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Peter, Anto, Michael H. Azarian, and Michael Pecht. "Reliability of Manganese Dioxide and Conductive Polymer Tantalum Capacitors under Temperature Humidity Bias Testing." International Symposium on Microelectronics 2015, no. 1 (2015): 000713–19. http://dx.doi.org/10.4071/isom-2015-tha64.

Full text
Abstract:
Despite being highly reliable under steady state operating conditions, manganese dioxide (MnO2) tantalum capacitors are prone to catastrophic exothermic failures under surge current conditions. Such failures can be mitigated by the use of conductive polymers in place of MnO2. However, these polymers are more susceptible to failure at elevated humidity levels. In this paper, the electrical performances of both MnO2 and polymer tantalum capacitors are compared by subjecting them to temperature humidity bias testing at 85°C and 85% RH. The test population consists of tantalum capacitors with two voltage ratings (50V and 16V). At each of these voltage ratings, two sets of tantalum capacitors, one each with MnO2 and conductive polymer electrodes, were tested. The voltage levels used to bias the capacitors were periodically increased in multiples of the rated voltage to accelerate degradation. The performance of the capacitors was tracked by monitoring their capacitance, dissipation factors and leakage currents, both in-situ and at room temperature. The degradation trends are discussed in light of the differences in voltage ratings and electrode types. These trends are also mapped to fundamental failure mechanisms within the capacitors.
APA, Harvard, Vancouver, ISO, and other styles
3

Biswas, Mrinmay, and R. George Kelsey. "Failure Model of Polymer Mortar." Journal of Engineering Mechanics 117, no. 5 (1991): 1088–104. http://dx.doi.org/10.1061/(asce)0733-9399(1991)117:5(1088).

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kausch, H. H., and W. J. Cantwell. "Physical Mechanisms in Polymer Failure." Europhysics News 20, no. 4 (1989): 52–54. http://dx.doi.org/10.1051/epn/19892004052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yao, Qizhou, and Jianmin Qu. "Interfacial Versus Cohesive Failure on Polymer-Metal Interfaces in Electronic Packaging—Effects of Interface Roughness." Journal of Electronic Packaging 124, no. 2 (2002): 127–34. http://dx.doi.org/10.1115/1.1459470.

Full text
Abstract:
Debonding of polymer-metal interfaces often involves both interfacial and cohesive failure. Since the cohesive strength of polymers is usually much greater than the polymer-metal interfacial strength, cohesive failure near the interface is usually desired for enhancing the interfacial adhesion. Roughened surfaces generally produce more cohesive failure; therefore, they are used commonly in practice to obtain better adhesion. This paper develops a fracture mechanics model that can be used to quantitatively predict the amount of cohesive failure once the surface roughness data are given. An epoxy/Al interface was investigated using this fracture mechanics model. The predicted amount of cohesive failure as a function of surface roughness compares very well with the experimentally measured values. It is believed that this model can be extended to other polymer–metal interfaces. Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received by the EPPD.
APA, Harvard, Vancouver, ISO, and other styles
6

Pang, Yu-Yang, Gang Wu, Zhi-Long Su, and Xiao-Yuan He. "Experimental study on the carbon-fiber-reinforced polymer–steel interfaces based on carbon-fiber-reinforced polymer delamination failures and hybrid failures." Advances in Structural Engineering 23, no. 11 (2020): 2247–60. http://dx.doi.org/10.1177/1369433220911167.

Full text
Abstract:
The failure mode is crucial to the interfacial bond performance between carbon-fiber-reinforced polymer plates and steel substrates. Existing studies mainly focused on the cohesive failures in the adhesive; however, research on other types of failure modes is still limited. In this article, a series of single-shear bonded joints are prepared to investigate the bond behaviors of the carbon-fiber-reinforced polymer–steel interfaces based on carbon-fiber-reinforced polymer delamination failures and hybrid failures. Three kinds of adhesives—which have different tensile strengths and elastic moduli—and two kinds of carbon-fiber-reinforced polymer plates—which have different interlaminar shear strengths—are used to evaluate the influencing factors of carbon-fiber-reinforced polymer–steel interfaces. The three-dimensional digital image correlation technique is applied to measure the strain and the displacement on the surface of each specimen. The obtained test results include the strain distribution, the ultimate load, the failure mode, the load–slip curves, and the bond–slip relationships. For the carbon-fiber-reinforced polymer delamination mode, the results show that the load at the debonding stage is closely related to the interlaminar shear strength of the carbon-fiber-reinforced polymer plate, and the higher the interlaminar shear strength is, the greater the load. However, for the hybrid mode, the load of the whole test process is independent of the interlaminar shear strength of the carbon-fiber-reinforced polymer plate.
APA, Harvard, Vancouver, ISO, and other styles
7

KOBIKI, A., S. SHIODA, and H. KAWADA. "PMC-26: Relationship Between Delayed Failure of Glass Fiber and Surface Condition Under Water Environment(PMC-IV: POLYMERS AND POLYMER MATRIX COMPOSITES)." Proceedings of the JSME Materials and Processing Conference (M&P) 2005 (2005): 42. http://dx.doi.org/10.1299/jsmeintmp.2005.42_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bagalkot, Anurag, Dirk Pons, Digby Symons, and Don Clucas. "Categorization of Failures in Polymer Rapid Tools Used for Injection Molding." Processes 7, no. 1 (2019): 17. http://dx.doi.org/10.3390/pr7010017.

Full text
Abstract:
Background—Polymer rapid tooling (PRT) inserts for injection molding (IM) are a cost-effective method for prototyping and low-volume manufacturing. However, PRT inserts lack the robustness of steel inserts, leading to progressive deterioration and failure. This causes quality issues and reduced part numbers. Approach—Case studies were performed on PRT inserts, and different failures were observed over the life of the tool. Parts molded from the tool were examined to further understand the failures, and root causes were identified. Findings—Critical parameters affecting the tool life, and the effect of these parameters on different areas of tool are identified. A categorization of the different failure modes and the underlying mechanisms are presented. The main failure modes are: surface deterioration; surface scalding; avulsion; shear failure; bending failure; edge failure. The failure modes influence each other, and they may be connected in cascade sequences. Originality—The original contributions of this work are the identification of the failure modes and their relationships with the root causes. Suggestions are given for prolonging tool life via design practices and molding parameters.
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, Yi-Chang, Ho Chang, Ching-Long Wei, Rahnfong Lee, Hua-Yi Hsu, and Cheng-Chung Chang. "Determination of deformation of a highly oriented polymer under three-point bending using finite element analysis." e-Polymers 17, no. 1 (2017): 83–88. http://dx.doi.org/10.1515/epoly-2016-0248.

Full text
Abstract:
AbstractThe molecular chains of a highly oriented polymer lie in the same direction. A highly oriented polymer is an engineering material with a high strength-to-weight ratio and favorable mechanical properties. Such an orthotropic material has biaxially arranged molecular chains that resist stress in the tensile direction, giving it a high commercial value. In this investigation, finite element analysis (FEA) was utilized to elucidate the deformation and failure of a highly oriented polymer. Based on the principles of material mechanics and using the FEA software, Abaqus, a solid model of an I-beam was constructed, and the lengths of this beam were set based on their heights. Three-point bending tests were performed to simulate the properties of the orthotropic highly oriented polymer, yielding results that reveal both tension failure and shear failure. The aspect ratio that most favored the manufacture of an I-beam from highly oriented polymers was obtained; based on this ratio, a die drawing mold can be developed in the future.
APA, Harvard, Vancouver, ISO, and other styles
10

Ashraf, Muhammad Azeem, Bijan Sobhi-Najafabadi, Özdemir Göl, and D. Sugumar. "“Time-to-failure” prediction for a polymer-polymer swivelling joint." International Journal of Advanced Manufacturing Technology 39, no. 3-4 (2007): 271–78. http://dx.doi.org/10.1007/s00170-007-1219-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Polymer failure"

1

Keilen, Kristian Berg. "Polymer failure modeled by Molecular Dynamics." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26248.

Full text
Abstract:
This thesis is written as a mandatory part of the master degree program Materials Science and Engineering at NTNU, spring 2014. This thesis has been done for the Departement of Engineering Design and Materials.Molecular dynamics (MD) is a field of science that studies interactions between atoms. MD operates on very small order of magnitudes, in space with Angstroms and in time with nanoseconds. Even with these small scales it is possible to reproduce events on a macroscopic level, due to some results of thermodynamics and statistical dynamics.MD is often used to model molecules, and in this thesis we will look at a distinct phenomenon: Bond scission. The breaking of bonds can happen in many cases, but in this thesis we wish to study irreversible bond breaking as a result of large strains for polyethylene. At what bond length can we say that the bond is broken?The model that we will use is a united atom (UA) polyethylene model with covalent bonds that have bond energy given by the Morse potential. We shall attempt to find bond breaking lengths that give strains that may be comparable with experimental results, so that this model can be used in further research down the line.MD is a science that builds upon a lot of other sciences, like quantum mechanics, statistical mechanics and thermodynamics. In this thesis, I have written a comprehensive introduction to the field, both in theory and in application of computer programs like LAMMPS, in hopefully such a way that one who is not familiar with MD can get a good enough understanding of the field to do some simulations themselves.
APA, Harvard, Vancouver, ISO, and other styles
2

Morley, Kevin P. "Criteria of failure for polymer blends." Thesis, Manchester Metropolitan University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303218.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Goutianos, Stergios. "Micromechanics of compressive failure in carbon-fibre polymer composites." Thesis, Queen Mary, University of London, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.411718.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Taherzadehboroujeni, Mehrzad. "Lifetime Estimation for Ductile Failure in Semicrystalline Polymer Pipes." Diss., Virginia Tech, 2019. http://hdl.handle.net/10919/91901.

Full text
Abstract:
The aim of this study is to develop a combined experimental and analytical framework for accelerated lifetime estimates of semi-crystalline plastic pipes which is sensitive to changes in structure, orientation, and morphology introduced by processing conditions. To accomplish this task, high-density polyethylene (HDPE) is chosen as the exemplary base material. As a new accelerated test protocol, several characterization tests were planned and conducted on as-manufactured HDPE pipe segments. Custom fixtures are designed and developed to admit uniaxial characterization tests. The yield behavior of the material was modeled using two hydrostatic pressure modified Eyring equations in parallel to describe the characterization test data collected in axial tension and compression. Subsequently, creep rupture failure of the pipes under hydrostatic pressure is predicted using the model. The model predictions are validated using the experimental creep rupture failure data collected from internal pressurization of pipes using a custom-designed, fully automatic test system. The results indicate that the method allows the prediction of pipe service lifetimes in excess of 50 years using experiments conducted over approximately 10 days instead of the traditional 13 months. The analytical model is joined with a commercial finite element package to allow simulations including different thermal-mechanical loading conditions as well as complicated geometries. The numerical model is validated using the characterization test data at different temperatures and deformation rates. The results suggest that the long-term performance of the pipe is dominated by the plastic behavior of the material and its viscoelastic response is found to play an insignificant role in this manner. Because of the potential role of residual stresses on the long-term behavior, the residual stress across the wall thickness is measured for three geometrically different HDPE pipes. As expected, the magnitude of tensile and compressive residual stresses are found to be greater in pipes with thicker walls. The effect of the residual stress on the long-term performance of the pipes is investigated by including the residual stress measurements into the numerical simulations. The residual stress slightly accelerates the failure process; however, for the pipe geometries examined, this acceleration is insignificant.<br>Doctor of Philosophy<br>The use of plastic pipes to carry liquids and gases has greatly increased in recent decades, primarily because of their moderate costs, long service lifetimes, and corrosion resistance compared with materials such as corrugated steel and ductile iron. Before these pipes can be effectively used, however, designers need the capability to quickly predict the service lifetime so that they can choose the best plastic material and pipe design for a specific application. This capability also allows manufacturers to modify materials to improve performance. The aim of this study is to develop a combination of experiments and models to quickly predict the service lifetime of plastic pipes. High-density polyethylene (HDPE) was chosen as the plastic material on which the model was developed. Several characterization tests are planned and conducted on as-manufactured HDPE pipe segments. The yielding behavior of the material is modeled and the lifetime predictions are evaluated. The predictions are validated by experimental data captured during pipe burst tests conducted in the lab. The results indicate that the method allows the accurate prediction of pipe service lifetimes in excess of 50 years using experiments conducted over approximately 10 days instead of the traditional 13 months, resulting in significant savings in time (and consequently costs) and making it possible to introduce new materials into production more rapidly.
APA, Harvard, Vancouver, ISO, and other styles
5

Summers, Patrick T. "Predicting Compression Failure of Fiber-reinforced Polymer Laminates during Fire." Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/32770.

Full text
Abstract:
A thermo-structural model was developed to predict the failure of compressively loaded fiber-reinforced polymer (FRP) laminates during fire. The thermal model was developed as a one-dimensional heat and mass transfer model to predict the thermal response of a decomposing material. The thermal properties were defined as functions of temperature and material decomposition state. The thermal response was used to calculate mechanical properties. The structural model was developed with thermally induced bending caused by one-sided heating. The structural model predicts out-of-plane deflections and compressive failure of laminates in fire conditions. Laminate failure was determined using a local failure criterion comparing the maximum combined compressive stress with the compressive strength. Intermediate-scale one-sided heating tests were performed on compressively loaded FRP laminates. The tests were designed to investigate the effect of varying the applied stress, applied heat, and laminate dimensions on the structural response. Three failure modes were observed in testing: kinking, localized kinking, and forced-response deflection, and were dependent on the applied stress level and independent of applied heating. The times-to-failure of the laminates followed an inverse relationship with the applied stress and heating levels. The test results were used to develop a relationship which relates a non-dimensionalized applied stress with a non-dimensionalized slenderness ratio. This relationship relates the applied stress, slenderness ratio, and temperature of the laminate at failure and can be used to determine failure in design of FRP laminate structures. The intermediate-scale tests were also used to validate the thermo-structural model with good agreement.<br>Master of Science
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Fuh-Sheng. "Damage and failure analysis of continuous fiber-reinforced polymer composites." Case Western Reserve University School of Graduate Studies / OhioLINK, 1992. http://rave.ohiolink.edu/etdc/view?acc_num=case1056554068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dunn, Leigh. "Investigating accidents involving aircraft manufactured from polymer composite materials." Thesis, Cranfield University, 2013. http://dspace.lib.cranfield.ac.uk/handle/1826/8448.

Full text
Abstract:
This thesis looks into the examination of polymer composite wreckage from the perspective of the aircraft accident investigator. It develops an understanding of the process of wreckage examination as well as identifying the potential for visual and macroscopic interpretation of polymer composite aircraft wreckage. The in-field examination of aircraft wreckage, and subsequent interpretations of material failures, can be a significant part of an aircraft accident investigation. As the use of composite materials in aircraft construction increases, the understanding of how macroscopic failure characteristics of composite materials may aid the field investigator is becoming of increasing importance. The first phase of this research project was to explore how investigation practitioners conduct wreckage examinations. Four accident investigation case studies were examined. The analysis of the case studies provided a framework of the wreckage examination process. Subsequently, a literature survey was conducted to establish the current level of knowledge on the visual and macroscopic interpretation of polymer composite failures. Relevant literature was identified and a compendium of visual and macroscopic characteristics was created. Two full-scale polymer composite wing structures were loaded statically, in an upward bending direction, until each wing structure fractured and separated. The wing structures were subsequently examined for the existence of failure characteristics. The examination revealed that whilst characteristics were present, the fragmentation of the structure destroyed valuable evidence. A hypothetical accident scenario utilising the fractured wing structures was developed, which UK government accident investigators subsequently investigated. This provided refinement to the investigative framework and suggested further guidance on the interpretation of polymer composite failures by accident investigators.
APA, Harvard, Vancouver, ISO, and other styles
8

Powar, Pratik Rajesh, and Ashkan Raeisi. "Effect of strain rate on continuum and pre-cracked polymer failure." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-21637.

Full text
Abstract:
The main intention of this thesis work was to investigate the effect of strain rate on continuum and pre-cracked polymer failure. Low-Density Polyethylene (LDPE) was chosen to study experimentally and numerically. In order to cover wide range of strain rates, four specific strain rates were selected for the uniaxial tensile tests. To perform the tests, cyclic loading and unloading with relaxation was utilized in the room temperature for continuum specimen and for pre-cracked specimen monotonic tensile test till failure was utilized. Through Digital Image Correlation (DIC) the local strain distribution was assessed through the specimen and the deformation was compared with simulation results. Based on the extensive literature review of material models from PolyUMod library among Viscoplastic models, the Three Network Viscoplastic (TNV) model was selected to proceed with the calibration. The motivation behind choosing TNV model is it's capability of capturing load-unload curves, different strain rates as well as non-linear responses. Furthermore, it was seen that among Viscoplastic models, TNV has the lowest average errors which plays a vital role in this case as the accuracy of FE simulation directly depends on the calibration results. From the experimental results it was safe to say that with increasing strain rates LDPE films tend to get stiffer and stronger both in continuum and pre-cracked. Through the calibration it was seen that the predicted curves were in reasonable agreement with experimental ones. Hence,the calibrated model was exported as python script into Abaqus CAE to perform the simulations. The comparison was done and discussed in details between the simulation and experimental data in three orientations; MD (Machine Direction), CD (Cross Direction) and 45 direction.
APA, Harvard, Vancouver, ISO, and other styles
9

Tehrani, Mohammad Jafari. "Micromechanical Analysis of Strength of Polymer Networks with Polydisperse Structures." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1491913532934372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kalluri, Ravi Shankar. "Failure of transparent polymer composite laminated glass panels under impact loading." Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/4902.

Full text
Abstract:
Thesis (M.S.)--University of Missouri-Columbia, 2007.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on March 27, 2008) Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Polymer failure"

1

Lausanne Polymer Meeting (3rd 1988). Physical mechanisms in polymer failure. The Society, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mavinkere Rangappa, Sanjay, Thottyeapalayam Palanisamy Satishkumar, Marta Maria Moure Cuadrado, Suchart Siengchin, and Claudia Barile, eds. Fracture Failure Analysis of Fiber Reinforced Polymer Matrix Composites. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0642-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Analysis of failure in fiber polymer laminates: The theory of Alfred Puck. Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Noor, Ahmed Khairy. Computational Methods for Failure Analysis and Life Prediction: Proceedings of a workshop ... held at Langley Research Center, Hampton, Virginia, October 14-15, 1992. Langley Research Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

service), SpringerLink (Online, ed. Degradation of Implant Materials. Springer New York, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lothar, Engel, ed. Scanning electron microscopy of plastics failure. Hanser Publishers, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

International Seminar on Dynamic Failure of Materials--Theory, Experiments, and Numerics (1991 Vienna, Austria). Dynamic failure of materials: Theory, experiments, and numerics. Elsevier Applied Science, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stuetzer, Otmar M. Correlation of electrical reactor cable failure with materials degradation. Electrical Engineering Instrumentation and Control Branch, Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stuetzer, Otmar M. Correlation of electrical reactor cable failure with materials degradation. Electrical Engineering Instrumentation and Control Branch, Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

H, Kenner Vernal, and American Society of Mechanical Engineers. Applied Mechanics Division., eds. Time-dependent failure of polymers: Experimental studies : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. American Society of Mechanical Engineers, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Polymer failure"

1

Reincke, K., and W. Grellmann. "Impact failure energy - introduction." In Polymer Solids and Polymer Melts–Mechanical and Thermomechanical Properties of Polymers. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55166-6_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Reincke, K., and W. Grellmann. "Impact failure energy - data." In Polymer Solids and Polymer Melts–Mechanical and Thermomechanical Properties of Polymers. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55166-6_42.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Reincke, K., and W. Grellmann. "Impact failure energy - application." In Polymer Solids and Polymer Melts–Mechanical and Thermomechanical Properties of Polymers. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55166-6_43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Morton-Jones, David H., and John W. Ellis. "Failure of a Polypropylene Vessel." In Polymer Products. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4101-4_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brüller, O. S. "Energetical Aspects of Polymer Failure." In Advances in Continuum Mechanics. Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-48890-0_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nĕmec, J. "Some Observations about the Failure of Polymer Composites." In Polymer Composites, edited by Blahoslav Sedlácek. De Gruyter, 1986. http://dx.doi.org/10.1515/9783110856934-043.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sabarirajan, N., T. Sathish, and R. Deepak Joel Johnson. "Failure Analysis of Polymer-Based Composites." In Polymer-Based Composites. CRC Press, 2021. http://dx.doi.org/10.1201/9781003126300-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Shi-Qing, and Shiwang Cheng. "Experiments-inspired molecular modeling of yielding and failure of polymer glasses under large deformation." In Polymer Glasses. CRC Press, 2016. http://dx.doi.org/10.1201/9781315305158-16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ray, Bankim Chandra, Rajesh Kumar Prusty, and Dinesh Kumar Rathore. "Moisture-Dominated Failure in Polymer Matrix Composites." In Fibrous Polymeric Composites. CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ray, Bankim Chandra, Rajesh Kumar Prusty, and Dinesh Kumar Rathore. "Hygrothermal-Dominated Failure in Polymer Matrix Composites." In Fibrous Polymeric Composites. CRC Press, 2018. http://dx.doi.org/10.1201/9780429506314-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Polymer failure"

1

Wu, Wei, and Guowei Ma. "Failure mechanism of epoxy polymer: transition from ductile to brittle failure." In Fourth International Conference on Experimental Mechanics, edited by Chenggen Quan, Kemao Qian, Anand K. Asundi, and Fook S. Chau. SPIE, 2009. http://dx.doi.org/10.1117/12.852677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rama, Pratap, Rui Chen, and John Andrews. "Failure Analysis of Polymer Electrolyte Fuel Cells." In SAE World Congress & Exhibition. SAE International, 2008. http://dx.doi.org/10.4271/2008-01-0634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wong, C. p., J. Xu, L. Zhu, et al. "Recent Advances on Polymers and Polymer Nanocomposites for Advanced Electronic Packaging Applications." In 2005 Conference on High Density Microsystem Design and Packaging and Component Failure Analysis. IEEE, 2005. http://dx.doi.org/10.1109/hdp.2005.251427.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cox, Kevin R., and Richard E. Robertson. "Controlling Failure of Polymer Skin/Foam Bilaminate Sheets." In SAE World Congress & Exhibition. SAE International, 2007. http://dx.doi.org/10.4271/2007-01-1216.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hubbard, Robert L. "Failure Relief in WLP and PLP Polymer Layers." In 2018 International Wafer Level Packaging Conference (IWLPC). IEEE, 2018. http://dx.doi.org/10.23919/iwlpc.2018.8573260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tay, Andrew A. O., Y. Ma, and Sim Heng Ong. "Failure of polymer-metal interfaces under hygrothermal loading." In Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS, edited by Bernard Courtois, Selden B. Crary, Kaigham J. Gabriel, Jean Michel Karam, Karen W. Markus, and Andrew A. O. Tay. SPIE, 2000. http://dx.doi.org/10.1117/12.382306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Reithofer, Peter, and Artur Fertschej. "Failure models for thermoplastics in LSDYNA." In PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 – POLYMER PROCESSING SOCIETY PPS: Conference Papers. Author(s), 2016. http://dx.doi.org/10.1063/1.4965514.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pugatschow, A., R. Heiderhoff, M. Forster, U. Scherf, and L. J. Balk. "EBIC Investigations on Active Polymer Devices." In 2007 14th International Symposium on the Physical and Failure Analysis of Integrated Circuits. IEEE, 2007. http://dx.doi.org/10.1109/ipfa.2007.4378088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bauer, M., Ch Guntrum, M. Ota, W. Rippel, and G. Busse. "Thermographic characterisation of defects and failure in polymer composites." In 1992 Quantitative InfraRed Thermography. QIRT Council, 1992. http://dx.doi.org/10.21611/qirt.1992.021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gould, P. J., D. Porter, and I. G. Cullis. "Predicting the damage/failure transition in polymer-bonded explosives." In DYMAT 2009 - 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, 2009. http://dx.doi.org/10.1051/dymat/2009230.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Polymer failure"

1

CHAMBERS, ROBERT S., EARL DAVID REEDY JR., CHI S. LO, DOUGLAS B. ADOLF, and TOMMY R. GUESS. Micromechanical Failure Analyses for Finite Element Polymer Modeling. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/768081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ratto, T., and A. Saab. Polymer Filler Aging and Failure Studied by Lateral Force Microscopy. Office of Scientific and Technical Information (OSTI), 2009. http://dx.doi.org/10.2172/956856.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Waas, A. M. Instrumentation for the Dynamic Response and Failure of Polymer Matrix Composites. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada391110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tippur, Hareesh V., and Maria L. Auad. Processing and Dynamic Failure Characterization of Novel Impact Absorbing Transparent Interpenetrating Polymer Networks (t-IPN). Defense Technical Information Center, 2013. http://dx.doi.org/10.21236/ada587367.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wiegand, Donald A. Constant Critical Strain for Mechanical Failure of Several Particulate Polymer Composite Explosives and Propellants and Other Explosives. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada327298.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yee, A. F. [The structural basis for fatigue failure initiation in glassy polymers]. Progress report, July 1991--October 1993. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10167559.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yee, A. F. The structural basis for fatigue failure initiation in glassy polymers. Final technical report, August 1, 1988--July 31, 1997. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/555493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Polymer failure' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography