To see the other types of publications on this topic, follow the link: Procesní diagram.
Dissertations / Theses on the topic 'Procesní diagram'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Procesní diagram.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Janoutová, Tereza. "Zavedení procesního portálu na VŠE." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-203871.
Full textAbstract:
Diploma thesis is focused on the possibility of implementation of process portal at University of Economics in Prague. The aim is to describe process portal of Czech Technical University and propose solution for implementation of process portal at University of Economics in Prague. This solution includes process categorization and creating process diagrams for the most important processes at University of Economics in Prague. The thesis also includes the creation and evaluation of a questionnaire, which introduces process portal to students and helps to find out whether process portal is understandable for students and whether they would use it. Thesis objectives are specified in the introduction. The next section describes the research work. Basic concepts are defined and presented solutions Process Portal on the Czech Technical University can be found in the third part. The fourth part describes the benefits which comes from implementation of process portal and also describes questionnaire, which was focused on finding interest of students. The fifth part is focuses on the design of process solutions portal for University of Economics. The summary describes the findings and proposed recommendations.
2
Kmochova, Zdena. "Analýza procesů jako základ pro zavedení nového informačního systému." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-261815.
Full textAbstract:
The main objective of this thesis is to analyze the processes in the company POP service, Ltd., also to analyze the current problem in this company and to recommend and propose measures which eliminate the causes of the emergence of the problem. The causes originate from the aspects of the management of people and processes are identified through the analysis of processes associated with the problem and eliminated on the basis of proposals metrics and responsibilities for these processes. The theoretical part of the thesis is devoted to concepts in the field of process management. The theoretical part characterizes these concepts process management, business processes, process analysis and process modeling methods, process maps, graphical notation for writing business processes, business process improvement and analysis organization. In the second part of the thesis is presented the examined organizations POP service, Ltd.. Based on the analysis of the current state are defined vision, mission and goals of the organization. Then there is described a procedure of the analysis of the current state, which is process analysis and proposal of selected processes, metrics and responsibilities for these processes. Methods of analysis are SWOT analysis, analysis of the activities, structured interviews and process analysis. The result of this thesis is to analyze the selection of processes of the company POP service, Ltd., proposal metrics, define jobs and responsibilities and suggestions for improving the selected process.
3
Hala, Filip. "Návrh řízení výrobního procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2013. http://www.nusl.cz/ntk/nusl-223925.
Full textAbstract:
The aim of this diploma thesis is to create and apply a methodology to improve the manufacturing process. Processes for the passage of a contract through the company and activities of the foreman were analyzed. According to this analysis, a methodology was created for continuous improvement of the manufacturing process. This methodology was applied to the data obtained in the analysis. Based on the application of the methodology, actions have been proposed to improve the production process.
4
Fikar, Vítězslav. "Analýza procesů a návrh jejich optimalizace ve strojírenském podniku." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-73153.
Full textAbstract:
This thesis is focused on comparison of function management and processing management, especially their advantages and benefits. Using of processing management is introduced on practical example. There is made process analysis on chosen processes in engineering company. Detailed description of these processes is the result. Next step is searching of shortcomings and mistakes in these processes and trying to find solutions of them. The result is evaluation of these solutions and their benefits for company. Then there is proposal of introduction of solutions into processes in the company
5
Vandírková, Jana. "Procesně řízená organizace." Master's thesis, Vysoká škola ekonomická v Praze, 2016. http://www.nusl.cz/ntk/nusl-261808.
Full textAbstract:
The subject of the master thesis Process driven organization is using UML language and BPMN methodology to model business processes of the selected organization, followed by using obtained diagrams organization for upgrade any of modeled diagram existing business processes leading to prosperity of the selected organization.
6
Mayerbergová, Ilona. "Studie operativního řízení výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2012. http://www.nusl.cz/ntk/nusl-223462.
Full textAbstract:
The goal of this diploma thesis is to use the principles of lean manufacturing to lean workplace and eliminate all forms of waste in this workplace. A part of this work is opti-mal design of the workplace in terms of ergonomics which should have a positive effect on shortening lead time and process cycle efficiency. Shortening the lead time will allow company to respond more quickly to customer requirements and this effect may subsequently lead to the drop in inventories.
7
Schwarz, Adam. "Štíhlé řízení vybrané části výrobního systému." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417555.
Full textAbstract:
The work is focused on improving the concept of lean management in a selected engineering company, where analyzes are performed with the help of selected methods and tools to reveal current problems. The data are then processed and based on them, measures for change are proposed with an emphasis on minimizing the rate of waste of time and costs and increasing production efficiency.
8
Marešová, Petra. "Optimalizace materiálového toku a uspořádání pracoviště ve spol. ABB s. r. o." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2014. http://www.nusl.cz/ntk/nusl-224473.
Full textAbstract:
This thesis analyzes the material flow and layout of the workplace at ABB Ltd. Based on Sankeyova diagram and process analysis are developed proposals to improve existing activities in society so as to streamline manufacturing processes and lead time and cost savings.
9
Sojáková, Šárka. "Zavedení managementu čistých komponent." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230242.
Full textAbstract:
Presented thesis entitled “Cleanliness of components management implementation” with analysis of the currently applied cleanliness management system in the organization, identification of the root causes of contamination in production, suggestion of the possible solution and recommendation of actions. All material presented in this thesis were collected in Mann+Hummel (CZ) s.r.o., a producer of filters and fluid circuits for automotive industry.
10
Tesař, Michal. "Návrh na zlepšení výrobní linky BS Unit ve výrobní společnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2017. http://www.nusl.cz/ntk/nusl-316960.
Full textAbstract:
The thesis focuses on the analysis of the current production system on the production line BS Unit in the company Daikin Device Czech Republic, s.r.o. in terms of material flow and move of worker. The main outcome is the proposal of precaution for improvement of the currently production of proces.The first part of the thesis describes the basic terms and methods from the field of industrial engineering. These findings are then used for data analysis and for the solution proposal in the analytical part.
11
Nejdlová, Anna. "Štíhlé řízení výrobního systému." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2020. http://www.nusl.cz/ntk/nusl-416791.
Full textAbstract:
This thesis is focused on lean management of the production system in the company ASSA ABLOY Czech & Slovakia s. r. o. The main outcome is the proposal of a new layout and process balancing with the use of lean manufacturing methods. The first part describes the theoretical basics which are used for analysis afterwards. The results of these analyses are then used as a main basis for the proposal of changes in the chosen part of the production process.
12
Světlíková, Barbora. "Statistická regulace výrobního procesu ve firmě." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2009. http://www.nusl.cz/ntk/nusl-222205.
Full textAbstract:
Using statistical methods to evaluate quality, it is possible to discover cases of non-accidental variances in quality-evaluating parameters and to analyse the reasons for their occurrence. The identification of these reasons enables their removal and the improvement of product quality. Routine evaluation of quality levels is facilitated by the employment of computer technology.
13
Bartošová, Kateřina. "Notace modelování procesů a jejich užití." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-193207.
Full textAbstract:
The companies can choose from a wide range of tools and methodologies for mapping their processes. The key point is to select the right ones to ensure they will match with the purpose of process mapping and the process models will be clear and easy to understand for the entire stakeholder spectrum. For process modeling we often use diagrams. We have notations that are very advanced, they can be very detailed and accurate. On the other hand we have those which are very simple and with only a few symbols they can capture basic ideas and attributes of the process. The aim of this thesis is to compare representatives from each group of notations and answer the question which notation is more suitable for different types of utilization of business process models. The representative of the advanced instruments is BPMN 2.0, which is compared with the basic flowcharts. The research is based on Delphi method.
14
Kupka, Ondřej. "Chladící jednotka pro projekt Barman." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413270.
Full textAbstract:
The aim of this master’s thesis was to create cooling unit which will became part of project Barman. Thesis describe process from definition of requirements, proposal, selection of components, PI and D diagram and in the last chapter the construction work. In the second part describe design of cooling unit’s model and simulation of cooling process. The last part of the thesis is describing software of the cooling unit and tis results.
15
Neugebauer, Tomáš. "Statistické řízení a regulace výrobního procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227876.
Full textAbstract:
This dissertation deals with utilisation of the method SPC in the field of engineering production. The work is outlined as instructions for introduction and usage of SPC in production. The reason for introduction of SPC is the effort to improve the quality constantly. The systematic approach was used for implementation of the very method so that the efficiency of the introduction is as high as possible. The dissertation contains three fundamental parts – theoretical part, suggestion of the process of the solution and practical implementation.
16
Charvátová, Petra. "Návrh opatření na snížení zákaznických reklamací." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2019. http://www.nusl.cz/ntk/nusl-402021.
Full textAbstract:
This diploma thesis deals with customer complaints of headlamps in Automotive Lighting s.r.o. The goal is to analyze the state of customer complaints for 2018 and to evaluate the biggest source of nonconformities in terms of the type of complaint based on Pareto analysis. The thesis focuses on solution of one particular type of complaint. The key part of the thesis is also the processing of the process analysis, the evaluation of the causes of the complaint and the draft of corrective measures that would eliminate the problem. The conclusion of the thesis contains evaluation of the proposed corrective measures, including from the economic point of view.
17
Krejčiříková, Zuzana. "Návrh zlepšení procesů v centru sdílených služeb." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-225078.
Full textAbstract:
This thesis deals with a proposal for processes improvement of the Shared Service Center. In the first part are described teoretical bases which are used for next analysis and proposal. In the analytical part, there is mapped the process in accounting department in account payable domain and identification of problematical parts of process. Based on analysis of outputs, there is proposed the project for implementation and its evaluation.
18
Šváchová, Mariana. "Určování způsobilosti a stability vybraného technického procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417798.
Full textAbstract:
This diploma thesis deals with the evaluation of the capability of a specific production process. The theoretical part of the work contains a description of statistical process control, types of control charts and evaluation of process capability. The practical part is focused on evaluating the capability of a specific process. The method of dataset collection is described at first, then this data are analyzed and the capability of this process is evaluated.
19
Šimek, Ondřej. "Systém monitorování výrobního procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229264.
Full textAbstract:
This thesis deals with production system monitoring using the SPC method. The reason for the introduction of the SPC system is in an effort to improve the quality consistantcy.This master thesis consists of three parts: Teoretic part: to solve the basic access and process for the aplication of SPC methodics. Practical part: includes the descripton of comtemporary quality control and propositions for the SPC method. Conclution:Conclusions and recommendations are made on the basis of the data evaluation.
20
Ludvík, Martin. "Analýza diagramů byznys procesů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2009. http://www.nusl.cz/ntk/nusl-236696.
Full textAbstract:
The aim of Analysis of Business Process Diagrams is to create procedure that is able to find typical patterns in business process diagrams. Besides, it is necessary to design and implement application, which will be able to find and mark selected workflow patterns. This analysis is based on XML document, in which a business process diagram is stored. Important thing is to keep the ability to extend the number of patterns, which can be find out in a diagram. Also, it is important to solve some special situations, i.e. overlapping of patterns.
21
Vidová, Katarína. "Statistické vlastnosti regulačních diagramů a modelů způsobilosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417799.
Full textAbstract:
The diploma thesis is focused on process stability and capability assessment. It describes certain types of control charts, basic capability indices as well as Box-Cox transformation. The practical part of the study is concerned with applying control charts on generated data and consequently on real data. By this, it focuses on comparing various methods of estimating sample standard deviation and on the impact of non-compliance with the assumption of normal distribution of process variable on process stability and capability assessment.
22
Bieliauskas, Marius. "Organizacijos veiklos žodyno sinchronizacijos su veiklos procesais tyrimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2013. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130826_110734-84510.
Full textAbstract:
Šių dienų verslo pasaulis yra konkurencingas kaip niekad. Naujos rinkos, sparčiai besiskverbiančios technologijos į verslo sektorių, internetas, tiesiog priverčia keisti nusistovėjusį požiūri į verslą ir organizavimą bei į visą tai pažvelgti kitu kampu.
Šiame darbe pateikiama veiklos procesų, jų modeliavimo galimybių bei notacijų pritaikomumo šių dienų rinkai analizė. Analizuojamos modeliavimo notacijų galimybės ir pajėgumas, pritaikomumas bei efektyvumas projektuojant veiklos procesus. Apžvelgiami veiklos žodyno reikalingumo ir naudingumo aspektai. Analizuojami esami veiklos procesų ir veiklos žodynų sinchronizacijos sprendimai. Atlikus išsamią standartų bei esamų spendimų analize buvo nustatyta jog nėra daugiafunkcinio algoritmo kuris vykdytų šiuos veiksmus: veiklos procesų diagramos formavimas remiantis turimu veiklos žodynu, veiklos žodyno sudarymas remiantis veiklos procesų diagrama bei veiklos procesų diagramos ir veiklos žodyno sinchronizacija tarpusavyje remiantis veiklos žodynu. Darbo tiklsas – veiklos procesų ir veiklos žodyno įvairiapusė sinchronizacija, pateikiamas algoritmo projektas, modeliai, veikimo aprašymai. Siekiamas rezultatas – organizacijos veiklos žodyno su veiklos procesais sinchronizacijos algoritmo prototipas.
Suprojektuotas algoritmas paremtas SBVR (Semantics of Business Vocabulary and Rules) standartu, BPMN notacija bei sukurtomis taisyklėmis reikalingoms įgyvendinti norimą algoritmo funkcionalumą. Eksperimento metu buvo sukurti atsitiktinių... [toliau žr. visą tekstą]<br>In today's business world is as competitive as ever. New markets, technology is rapidly penetrating into the business sector, the Internet, just makes the shift in the approach to business and organization as well as the whole is to look at a different angle.
This paper presents the operational processes of modeling opportunities and notations applicability of the present day market analysis. Analyzed the possibility of modeling notations and performance, adaptability and efficiency of the design of business processes. An overview of the activities dictionary necessity and utility aspects. Analysis of existing business processes and activities dictionaries synchronization solutions. After a comprehensive standards and existing solutions in the analysis it was found that there is a multi-algorithm has the following steps: business process chart formation on the basis of the available business dictionary dictionary of business processes based on activity diagrams and business process diagrams and activity dictionary sync with each other on the basis of activity dictionary. Work purpose - business processes and performance dictionary versatile synchronization, the algorithm designs, models, operation resumes. To achieve the desired result - the organization's business processes with a dictionary synchronization algorithm prototype.
Designed algorithm based on SBVR (Semantics of Business Vocabulary and Rules) standard BPMN notation, and developed the rules required to implement... [to full text]
23
Sperling, David Moreno. "Arquiteturas contínuas e topologia: similaridades em processo." Universidade de São Paulo, 2003. http://www.teses.usp.br/teses/disponiveis/18/18131/tde-28032006-155803/.
Full textAbstract:
A pesquisa investiga o atual momento em que a topologia adquire uma posição especial dentro dos diálogos que a arquitetura historicamente têm estabelecido com outras áreas do conhecimento. Aponta e sistematiza aproximações contemporâneas com a topologia realizadas por arquitetos e desenvolve sua aproximação por meio da apresentação do conceito de diagrama processual topológico. Este conceito tripartite (diagrama, processo, topologia), é investigado em diferentes áreas como ciência cognitiva, lógica (matemática e semiótica) e filosofia, a fim de enriquecer a análise de sua atuação no campo da topologia. Nesta análise, o diagrama processual topológico é delineado como um meio operativo-representacional de relações espaciais estruturais (a topologia do objeto) que possui três variáveis: pensamento, espaço e tempo. Finalmente, este conceito é levado ao campo do projeto e da representação em arquitetura, construindo um diálogo crítico com o uso e a referência ao diagrama que fazem arquitetos contemporâneos paradigmáticos Bernard Tschumi, Peter Eisenman, Greg Lynn, Rem Koolhaas, MVRDV, Ben van Berkel, Lars Spuybroek, dentre outros<br>This research aims to analyse topologys state of the art. Nowadays topology is a key player in the dialogues that architecture has historically stablished with other areas of knowledge. This work points out and systematizes contemporary approximations with topology made by architects and developes their ideas by means of the concept of topologic processual diagram. This threefold concept (topology, process, diagram) is investigated in different areas such cognitive science, logic (mathematics and semiotics) and philosophy, in order to enrich the analyse of its actuation in the field of topology. In this analysis, the topologic processual diagram is described as an operative-representational medium of spatial structural relations (the objects topology), with three variables: thought, space and time. Finally, this concept is investigated within the realm of the project and representation in architecture, building up a critical dialogue with diagrams, its use and reference, as performed by paradigmatic contemporary architects - Bernard Tschumi, Peter Eisenman, Greg Lynn, Rem Koolhaas, MVRDV, Ben van Berkel, Lars Spuybroek and others
24
Ječmínková, Michaela. "Využití regulačních diagramů pro kontrolu jakosti." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2014. http://www.nusl.cz/ntk/nusl-224704.
Full textAbstract:
This diploma thesis deals with use of Shewhart Control Charts in quality control. The thesis describes the currently used process of quality control in the enterprise. Afterwards practical guidance for implementation of the statistical process control of the selected component and evaluation of capability is provided. An application for creating control charts and monitoring the quality of the product is included.
25
Ayala, Gaspar Sindy Annetty, Orozco Paula Lisbeth Ramirez, and Gutierrez Luis Enrique Ulco. "Aplicación de herramientas de productividad y mejora en el proceso de ensamblaje de mangueras hidráulicas en la empresa Contix S.A." Bachelor's thesis, Universidad Ricardo Palma, 2015. http://cybertesis.urp.edu.pe/handle/urp/1293.
Full textAbstract:
La presente tesis buscó analizar y aplicar herramientas de productividad y mejora en el proceso de ensamblaje de mangueras hidráulicas en la empresa Contix S.A.
La propuesta de mejora continua tuvo como objetivos: reducir los tiempos de entrega del producto final del proceso de ensamblaje; analizar, identificar y mejorar las demoras en los tiempos de operación, proponer una adecuada distribución de planta y minimizar las fallas de las máquinas.
Además, se utilizó técnicas de ingeniería, como por ejemplo; diagrama de actividades, diagrama de flujo, diagrama de recorrido. También el estudio de tiempo es fundamental para establecer los tiempos necesarios para cada operación.
Con estos métodos y herramientas de ingeniería se logró cumplir con el tiempo de entrega de los productos ensamblados y tener una distribución de planta ordenada que permitió una mayor fluidez de los operarios y del producto.
Como resultado más importante se obtuvo un aumento en la productividad de 52%, consiguiendo reducir el tiempo de entrega del producto. Por consiguiente, aumentando la satisfacción del cliente.
The following thesis seeks to analyze and apply productivity tools, in order to improve the assembly process of hydraulic hoses in the Company Contix S.A.
The improvement proposal continue aims to reduce the delivery time of the final product of the assembly process; analyze, identify and improve the delays in the operation times. To propose an appropriate distribution of plant and to minimize the machines’ failures.
In addition, engineering techniques will be used, such as; Activity Diagram (UML), Flow Diagram (or Flowchart), Circuit Diagram. It is also crucial the Study of time for determining the time required for each operation.
These methods and engineering tools will allow to comply with the assembled products’ delivery time and also have an orderly distribution plant allowing greater fluidity of operators and product.
As the most important result, an improved productivity of 52% will be achieved, reducing the delivery time of the product. As a result, the increase of customer satisfaction.
26
Siegl, Pavel. "Optimalizace procesu lakování." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227955.
Full textAbstract:
The diploma is focused on optimizing of rating during the process of painting by means of experimental methods and statistic analysis. Description of the study of the present state of painting process, result analysis and the project of optimal pre-set in practice.
27
Čermák, Jaroslav. "Optimalizace toku materiálu v lisovně plastů." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-221781.
Full textAbstract:
Subject of the graduation theses is to propose improvement of the current terms and make a proposal for an amendment. Changes leading to the transportation retrenchment and to reduction of the material and moulding usage. Teoretical part contains characteristics of processes, methodology and philoshophy for improving of company processes.In the practical part is analysed problem, made propositions of process improvement and estimation of contributions solutions.
28
Křivánková, Jana. "Procesní postupy v rámci územního a stavebního řízení." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-15412.
Full textAbstract:
This diploma thesis is focused on issues of positioning, licensing and fruition of civil engineering projects. The aim of this work is to analyze these matters and create subsequently single consecutions facilitating orientation in the construction law for the employers. First the elemental terms of procedure modelling and methodology are introduced to reader to be used further in the text for illustration of the processes. Furthermore particular types of construction positioning, planning permissions and fruition of constructions are analyzed to demonstrate the progression and essential inputs for gaining the authorization within the required moves. In the final part particular procedures giving instructions for the employers which steps to make for realization of their construction plan are elaborated. All the procedures are derived from the types of positioning, permissions and fruition of constructions as in the text described. Short presentation as an operative manual for employers assigning constructions to particular procedures is added.
29
Číšecký, Jakub. "Zlepšení systému managementu kvality." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318660.
Full textAbstract:
This diploma thesis deals with the optimization of the production process, namely the assembly of the machine tool. It contains a detailed description of the assembly process and its integration throughout the standard business case. The PERT method is used as the main optimization tool, complemented by a Gantt diagram. The aim is to design a process for more efficient production planning.
30
Ráček, Daniel. "Návrh na zlepšení procesů skladového hospodářství." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-224942.
Full textAbstract:
This master´s thesis includes the creation of proposals leading to an improvement of warehousing processes of the specific company. Master´s thesis consists of three main parts. The first part explains concepts relating to business processes, stock management, mentioned reguirements for the business process management and than described business processes modeling and function of information systems. The second part is focused on global processes analysis of the selected company and detailed analysis of the present warehousing processes status. The third part contains description of possible proposals for an improvement of warehousing processes and than description of specific proposals for necessary changes of the process support by information system.
31
Negrová, Stefania. "Statistická regulace procesů a snížení zmetkovitosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402586.
Full textAbstract:
The aim of the diploma´s thesis is analysis of the scrap of the chosen process, using the tools of statistical process control and proposal of appropriate containment to reduce the scrap. The thesis describes all seven basic tools of quality and the greatest attention is aimed to Shewart's control charts. One chapter discusses three methods of problem solving in technical practice, while one of the described methods is used in the practical part of the thesis.
32
Čtvrtlík, Miroslav. "Návrh plánování a řízení projektu v softwarové společnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2013. http://www.nusl.cz/ntk/nusl-223795.
Full textAbstract:
The thesis is focused on analysis and optimization of processes in a company realizing software projects. Its aim is to find deficiencies in the process of realization of an individual customer requirement and to design improvements. According to the analysis of the process of requirement realization, the deficiencies were analysed from which the most important were selected and used for designing optimization of this process.
33
Bordovský, Ondřej. "Analýza procesu řízení projektů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228202.
Full textAbstract:
This diploma thesis is engaged in project management , Královopolská Brno. The company belongs to the biggest Czech crane and hoist device manufacturers. The subject of this diploma thesis is the analysis of projects. Detection of bottlenecks in the project management process and suggest improvment ideas.
34
Raiskupová, Dagmar. "Návrh výrobního procesu se zaměřením na eliminaci nadbytečných kontrolních činností." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2017. http://www.nusl.cz/ntk/nusl-316909.
Full textAbstract:
The thesis deals with a proposal to change the production process by eliminating the redundant control activities. The first part of the thesis presents various possible theoretical approaches for this issue. It is followed by familiarisation with the concerned production company. The second part is the analytical part where the carried out activities of a particular automotive production unit are identified. These control activities are investigated and then either omitted or authorized. Finally the root causes for the fact that those activities have not already been eliminated are found.
35
Long, Suella. "Systematic generation of engineering line diagrams." Thesis, Loughborough University, 1999. https://dspace.lboro.ac.uk/2134/14135.
Full textAbstract:
This thesis describes research into a methodology for the systematic development of engineering line diagrams (ELOs) from process tlowsheets with a particular emphasis on safety, health and environmental (SHE) and operability issues. The current approach to the consideration of safety in design is largely reactive, relying on design reviews such as the HAZOP. If design safety is to be improved, then a comprehensive system, incorporating both proactive and reactive methods, must be adopted. The facility to develop proactive safety systems relies upon the presence of a systematic design procedure. Since design at this stage seems generally to be rather haphazard, there is a need to introduce structure to the design task before any progress can be made in the improvement of safety. Introducing structure to the design task not only provides a framework for the incorporation of SHE and operability issues, but should also improve the effectiveness of the overall design and the efficiency with which it is completed. More specifically, fewer good design opportunities should be lost due to poor information handling and thc amount of rework arising from misunderstandings between different disciplines should be minimised. In addition, learning how to perform the design task should become easier for new recruits. Relevant work in the fields of process design, process safety, engineering drawings and ELO development is discussed. An analysis of perceptions of the design task within industry is presented. The generation of a systematic method by iterative case study work with designers is described. The structural features of this method are explained. Some examples of the application of the method are given and the results of a trial within industry are discussed. This research has shown that there is no existing work which captures the logic for the order in which decisions for developing a first ELO are made. Neither is there a complete analysis of the activities and issues contributing to ELO development. A novel method for the systematic generation of ELOs has been produced and used as a framework for the incorporation of SHE and operability issues into design. Trials of the method within industry have shown it to be successful.
36
Slabyhoudek, Jiří. "Analýza chyb ve výrobním procesu a jejich odstraňování." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231361.
Full textAbstract:
This thesis deals with the analysis of assembly lines and improve of individual assembly processes to achieve the minimum number of discordant products . It consists of four parts - the first part of this labour deals with general information about the methods of quality control , which are beeing designed to improve actively used . The second part is devoted to the analysis of assembly lines in the company with regard to the financial value of discordant products that are on the line depreciated. Based on the results of determining the most critical line, which is then subjected to a thorough investigation. The third section focuses on selected critical line, you can find here a detailed analysis of discordant products and here is beeing established the root, that causes defects . Based on the information is beeing designed improvement and its application to the assembly line. The fourth section deals with a brief summary of all applicable suggestions for improvement and evaluation of their effectiveness.
37
Picka, Jaromír. "Sběr a zpracování dat pro statistické metody řízení výroby ABB." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-221151.
Full textAbstract:
Master’s thesis is point to the innovation the data collecting of testing machine of selective circuit breakers. New solution of data collection don’t affect the operations of testing machine. The cost calculation of new solution is included. Master’s thesis also included program solution of SPC methods and application of it to the process of testing the selective circuit breakers.
38
Chramosta, Adam. "Modelování procesů projektového řízení v bance." Master's thesis, Vysoká škola ekonomická v Praze, 2017. http://www.nusl.cz/ntk/nusl-358796.
Full textAbstract:
This diploma thesis deals with model of project realization within the bank. It is divided into theoretical and practical parts which complement each other. The first part, the theoretical one, is focused on defining theoretical assumptions about the business process', modelling, project and key performance indicators. The practical part includes the determination of project realization course, its comparison with established standards and subsequently designs of business process model. Along with the designed model there are set appropriate key performance indicators which are compared with ITIL and Prince 2 approaches. These three components of practical part meet the goal of the whole thesis.
39
Lacombe, Octavio. "Diagramas digitais: pensamento e gênese da arquitetura mediada por tecnologias numéricas." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/16/16136/tde-09082006-143023/.
Full textAbstract:
Esta tese procura compreender o papel da mediação das tecnologias numéricas nos procedimentos (pensamento e gênese) da arquitetura. Parte do pressuposto que o suporte digital, espaço virtual e interativo para a criação do projeto, é conseqüência da evolução gradual dessas tecnologias no fluxo contínuo das transformações culturais. Entendendo esse fluxo como processo, localiza na segunda metade do século XX a emergência de uma nova racionalidade apoiada nos termos relação, sistema e organização no lugar dos termos modernos função, estrutura e ordem. O pensamento diagramático, a analogia e o dialógico e experimental priom (material/procedimento) caracterizam procedimentos que, assumindo diferentes configurações, possibilitam o reconhecimento de uma arquitetura maquínica.<br>The thesis intend to understand the mediation of the numerical technologies on architectural procedures (thought and gênesis). It supposes that the digital support as a virtual and interactive space for design is resulting of a gradual evolution of these technologies undergoing through the continuous flux of cultural transformations. It locates at the XX century second half the emergence of a new racionality based on the terms relation, system and organization replacing the modern concepts of function, structure and order. Diagrammatic thought, analogy and the experimental and dialogical priom (material/procedure), enable the recognition of a machinic architeture.
40
CALDERON, ENRIQUE ROY DIONISIO. "DIAGRAM FOR MINIMUM CARBON CONSUMPTION. APPLICATION IN THE BLAST FURNACE IRONMAKING PROCESS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=29696@1.
Full textAbstract:
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>PROGRAMA DE SUPORTE À PÓS-GRADUAÇÃO DE INSTS. DE ENSINO<br>O cenário siderúrgico brasileiro passa, atualmente, por uma forte depressão, com uma capacidade instalada de 48,9 milhões de toneladas de aço bruto (que alcançará 51,9 milhões no primeiro trimestre de 2016) e uma queda na produção de 1,9 por cento em relação a 2014 (33,2 milhões de toneladas em 2015). Em 2015 teve-se um nível de utilização de 67,89 por cento das indústrias frente aos 85 por cento considerados como bom desempenho pelo Banco Nacional de Desenvolvimento Econômico e Social (BNDES), porcentagem que diminuiu em consequência da queda do consumo interno 21 por cento (24 milhões de toneladas). A indústria siderúrgica brasileira utiliza o Alto-Forno como uma tecnologia para obtenção de ferro gusa. O Alto-Forno, nos dias de hoje, continua sendo o reator que apresenta a melhor opção entre as diversas tecnologias de obtenção de ferro-gusa devido a sua alta taxa de produção, alto desempenho térmico, estabilidade e segurança operacional e longevidade dos equipamentos. Contudo, diversas melhoras no processo são pesquisadas, sendo uma delas o controle operacional do reator que visa manter sua estabilidade prevendo possíveis falhas e reduzindo os consumos energéticos para mantê-los com produtividade competitiva frente ao mercado internacional. O presente trabalho apresenta a concepção de um modelo com objetivo de gerar a superfície de mínimo consumo de redutor (carbono) para a produção de ferro primário em Altos-Fornos. No seu desenvolvimento foram consideradas as condições de equilíbrio das reações de redução, os balanços de massa e de energia do processo e o equacionamento de parâmetros operacionais. Sua aplicação à redução em Altos-Fornos é exemplificada para situações reais, baseada no banco de dados operacionais de uma usina siderúrgica. Foi possível, a partir de planos de corte nestas superfícies, gerar diagramas binários do tipo CR-RD (Consumo de Redutor-Redução Direta), passíveis de serem obtidos on-line com o processo Dentre os resultados obtidos, foi possível identificar, confirmar e prever, através da análise dos casos estudados que o fenômeno que se costuma chamar de gelada do forno, são essencialmente inviabilidades termodinâmicas importantes, geradas por procedimentos inadequados na sua operação. Como na prática tais fenômenos só são detectados após já terem afetado em definitivo a marcha normal do forno, o resultado é uma significativa perda de produtividade do equipamento devido à necessidade de algumas horas para a retomada da normalidade da operação. Assim, o presente modelo, permitindo através de seus outputs gráficos acompanhar a dinâmica de tais fenômenos, ou seja, a detecção do movimento da operação do forno na direção daquelas inviabilidades termodinâmicas, conferirá ao processo, quando implementado on line , não só a garantia de correções operacionais antecipadamente à ocorrência do problema, mas, principalmente, maior segurança operacional ao processo. O sucesso da aplicação do presente modelo tanto em condições operacionais normais como anormais do Alto-Forno, concluíram por sua plena adequação aos objetivos propostos.<br>The Brazilian steel sector currently faces a severe depression, with an installed capacity of 48.9 million tons of crude steel (which will reach 51.9 million in the first quarter of 2016) and there was a decrease in production of 1.9 per cent in relation to production in 2014 (33.2 million tons in 2015). In 2015, it was registered a level of use of 67.89 per cent from industries compared to 85 per cent considered as an indicator of good performance by the National Bank of Economic and Social Development (BNDES), percentage which decreased as consequence of the fall in internal consumption equivalent to 21 per cent (24 million). The brazilian steel industry uses blast furnace as a technology for obtaining pig iron. Currently, the blast furnace continues being the reactor which is considered the best option among the several technologies for obtaining pig iron due to the high production rate, high thermal performance, stability and operational safety as well as longevity of equipments. However, various improvements are being researched, being one of them the operational control of the reactor which aims to maintain its stability in order to prevent possible failures and reduce the energy consumptions to keep them competitive productivity on the international market. This work presents a model is unwrapped with the objective to generate the surface of minimum consumption of reductant (carbon) for the blast furnace ironmaking process. In developing the model the equilibrium conditions of the reduction, the mass and energy balances and the equations of major operational parameters, were considered. Its application to the blast furnaces is exemplified for real operational conditions, which were databases duly extracted from an integrated steelworks. It was also possible, from cutting plans on these surfaces, to obtain binary diagrams of RC-DR type (Reductant Consumption-Direct Reduction), able to be generated on-line with the process. Among the results, one could identify, confirm and predict through analysis of those real case studies, important thermodynamic unfeasibility of the furnace, which allowed to provide greater operational safety to the process. The excellent results obtained applying this model to regular and abnormal blast furnace operational conditions, led to conclude that their objectives were fully succeeded.
41
Jurásková, Anna. "Návrh materiálových toků ve výrobním procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2021. http://www.nusl.cz/ntk/nusl-442902.
Full textAbstract:
This diploma thesis deals with the issue of material flow and lean manufacturing in a given section of a selected manufacturing company. The diploma thesis focuses on the weaknesses of the current state of the selected workplace and defines the areas for improvement. The first part presents the theoretical basis of the work. The second part of the work is focused on analyzing the current state of the workplace. There are provided solutions for better material flow and to implement selected elements of lean manufacturing in the last part.
42
Hudečková, Eva. "Statistické řízení procesů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231244.
Full textAbstract:
The master´s thesis deals with the problem of statistical process control. The theoretical part describes the basic quality tools and new quality tools, as a tool for collecting, recording, classifying, and analyzing data. The knowledge gained from the theoretical part are used to describe processes in the company Heat Transfer Systems s.r.o., analyze sticking points, control plans updating and to statistical process control in the organization.
43
Buitrón, López Liliana. "Modelo de Lean Manufacturing basado en el ciclo de Deming y desarrollado en Gantt para incrementar la eficiencia en empresas plásticas." Universidad Peruana de Ciencias Aplicadas (UPC), 2019. http://hdl.handle.net/10757/626460.
Full textAbstract:
A nivel mundial se sabe que, con el transcurrir de los años la industria del sector plástico se mueve en un nivel de crecimiento que está relacionado principalmente a su amplia capacidad de transformación, combinación, durabilidad y otras aplicaciones que si son correctamente empleados contribuyen a mejorar la capacidad de competitividad de las organizaciones haciendo frente a otros convertidores. Sin embargo, esta situación creciente genera que los procesos productivos se encuentren más saturado generando mayores registros de pérdidas en tiempo que impacta en el incumplimiento de la demanda, y ya que las fábricas de producción plástica venden tiempo de máquina esta situación afecta la rentabilidad de la misma. Para poder mitigar estas situaciones se han realizado diversos esfuerzos surgiendo filosofías y metodologías que permitan encontrar la solución a estos problemas, debido a la gran importancia que tiene para las empresas trabajar con la mayor eficiencia en sus procesos y con ello buscar incrementar su disponibilidad productiva para incrementar el volumen de ventas. En tal sentido, se aborda la implementación de la metodología Lean Manufacturing aplicada bajo el soporte del ciclo Deming y cuyo objetivo principal será desarrollar una estrategia en base al ciclo PHVA que permitirá incrementar la eficiencia de máquina de manera sostenida. Su aporte se desarrolla en torno a la aplicación exitosa de la combinación de las herramientas Lean seleccionadas bajo el esquema Deming y desarrolladas bajo un cronograma de Gantt para la solución del caso y que se desarrollan en este artículo pudiendo servir de guía inicial a otros técnicos que buscan incrementar la productividad de sus procesos en otras fábricas del sector.<br>Worldwide, it is known that, over the years, the industry of the plastic sector is moving at a level of growth that is mainly related to its broad capacity for transformation, combination, durability and other applications that, if correctly used, contribute to improving the capacity of competitiveness of organizations facing other converters. However, this growing situation means that production processes are more saturated, generating higher losses in time that impact on non-compliance with demand, and since plastic production plants sell machine time, this situation affects the profitability of the same In order to mitigate these situations, various efforts have been made to come up with philosophies and methodologies that allow finding the solution to these problems, due to the great importance for companies to work with the highest efficiency in their processes and thus seek to increase their productive availability to increase sales volume In this regard, the implementation of the Lean Manufacturing methodology applied under the support of the Deming cycle whose main objective will be to develop a strategy based on the PHVA cycle that will increase machine efficiency in a sustained manner is approached. Its contribution is developed around the successful application of the combination of the Lean tools selected under the Deming scheme and developed under a Gantt timetable for the solution of the case and that are developed in this article, being able to serve as an initial guide to other technicians who They seek to increase the productivity of their processes in other factories in the sector.<br>Trabajo de investigaciòn
44
Vlach, Zdeněk. "Zlepšování jakosti ve výrobě přívěsů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228698.
Full textAbstract:
The diploma work is dealing with solution of concrete problem from the industrial practice. The main aim is to increase the quality in trailer production. The section of state of the art includes the description of selected characteristics about the company AGADOS, analysis of production process including controlling and monitoring activities. The theoretical study introduces processes and methods of planning for continuous improving of quality. The evaluation of monitored results with the support of IS tools was proceeded by construction of recognized divergences by the help of Pareto diagram. After the implementation of corrective proceedings to improve the quality, which was estimated in terms of processing engineering, repeated evaluations have been applied. The effectiveness of proposed proceedings is illustrated by construction of Pareto diagrams, which are presenting the complex examination of changes before and after implementation of corrective proceedings.
45
Rozenblum, Ziv. "Object-process networks & object-process diagrams : implementation issues for oil exploration systems." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42070.
Full textAbstract:
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Thesis (S.M.)--Massachusetts Institute of Technology, System Design and Management Program, 2007.<br>Includes bibliographical references (p. 103-104).<br>This thesis discusses different ways to increase the ability of OPN (Object-Process- Network), a system-architecture meta-language, to model complex systems and identify architectures to address those systems. It proposes ways to generate "out-of-the-box" solutions to technical problems, to weight a portfolio of objects as a possible way to achieve system functionality, to examine which of the possible subsystems should be within the system boundary and to rank architectures based on the value they create for the system stakeholders. The thesis also provides case studies to examine the practical aspects of those proposals.<br>by Ziv Rozenblum.<br>S.M.
46
Nováková, Veronika. "Optimalizace výrobního procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229501.
Full textAbstract:
The aims of this dissertation are to analyze the current state of process control, to identify the product range in selected organization and to design the process planning methodology to ensure an optimal implementation. Optimization is understood as costs minimization while keeping an acceptable continuity of supply. The dissertation contains a description of technological and non-manufacturing processes of brick products, as well as the summary and description of the basic tools of quality management.
47
Mustafa, Nasser Mousa Faleh. "Transformation of UML Activity Diagrams into Business Process Execution Language." Thèse, Université d'Ottawa / University of Ottawa, 2011. http://hdl.handle.net/10393/20106.
Full textAbstract:
Researchers in software engineering proposed design method for distributed applications to construct a set of communicating system components from a global behavior. The joint behaviors of these components must precisely satisfy the specified global behavior. The next concern is to transform the constructed models of these components into executable business processes by ensuring the exchange of asynchronous messages among the generated business processes. The introduction of Service-Oriented Architecture (SOA) has helped to achieve this goal. SOA provides high flexibility in composing loosely-integrated services that can be used among business domains to carry out business transactions; this composition is known as service orchestration. Moreover, SOA supports Model Driven Architecture (MDA) such that services modeled as UML Activity Diagrams (AD) can be transformed into a set of Business Execution Language (BPEL) processes. Many researchers discussed the transformation of UML AD and the Business Process Modeling Notation (BPMN) into BPEL. However, they did not discuss the practical limitations that some of these transformations impose.
This thesis addresses the imitations of the transformation from UML AD to BPEL processes using the IBM Rational Software Architect (RSA). We showed here that the tool is unable to create the correct BPEL artifacts from UML AD components in certain cases, for instance when the behavior includes the alternative for receiving single or concurrent messages, a weak loop, or certain choice activities. Furthermore, we provided novel solutions to the transformations in these cases in order to facilitate the transformation from UML AD to BPEL.
48
Duran, Jose M. "Applicability of process activity diagrams as a system design tool." Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5209.
Full text
49
Průša, David. "Implementace statistických metod při řízení kvality ve vybrané organizaci." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-257683.
Full textAbstract:
The masters thesis Implementation of statistical methods in quality management in chosen organization is divided into two parts. The first part deals with the theoretical preparation for the second practical part. The theoretical part consists of a literature review of currently used statistical methods in quality control according to ČSN ISO/TR 10017 and a description of the standards used in quality management. Furthermore, this section describes the seven basic tools of quality management. The second part is devoted to the presentation of the selected organization, describing the current state of evaluating the quality of the production, presentation of selected manufacturing process and product, application of control charts and economic evaluation. At the end of this thesis, the results are evaluated and there was a proposal for an appropriate strategy.
50
Kubíček, Jan. "Statistická podpora procesu řízení firmy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443764.
Full textAbstract:
Master’s thesis describes statistical process control as a support for company management. Statistical process control methods and tools are introduced. Requirements for automotive industry are stated specifically for IATF 16949 standard and VDA 6.3 process audit method. Thesis presents current state in company Sanmina-SCI Czech Republic s.r.o regarding statistical regulation. Applies statistical process controls into the new process considering automotive requirements. It is all happening together with a new business introduction of automotive customer.