Relevant bibliographies by topics / Slitina

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Slitina'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Slitina.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Slitina"

1

Vystrčil, J., J. Fojt, H. Moravec, and L. Joska. "Susceptibility of cobalt and nickel based alloys for bioaplication to nonuniform forms of corrosion." Koroze a ochrana materialu 58, no. 1 (2014): 5–10. http://dx.doi.org/10.2478/kom-2013-0016.

Full text
Abstract:
Streszczenie Kobaltové a niklové slitiny jsou běžně používaným materiálem v zubním lékařství. Jedním z důvodů použití je snaha o nahrazení slitin drahých kovů, jejichž cena neustále vzrůstá. Slitiny navíc v porovnání se zlatem a jeho slitinami dosahují vyšších modulů pružnosti, což umožňuje zmenšení hmotnosti dentálních prací při zachování stejných pevnostních charakteristik. Práce byla zaměřena na studium korozního chování komerčně dostupných slitin niklu a kobaltu užívaných v bioaplikacích. Byla studována náchylnost k nerovnoměrným formám koroze a posouzen vliv mikrostruktury na charakter ko
APA, Harvard, Vancouver, ISO, and other styles
2

Krausová, A., J. Macák, P. Sajdl, V. Renčiuková, and R. Novotný. "Koroze slitin Zr–Nb a Zr–Sn za simulovaných podmínek reaktoru VVER." Koroze a ochrana materialu 59, no. 4 (2015): 99–102. http://dx.doi.org/10.1515/kom-2015-0020.

Full text
Abstract:
Abstract Oxidační kinetiku lze v případě koroze zirkoniových slitin rozdělit do dvou stádií, která jsou od sebe oddělená transientním stavem. Výskyt transientního stavu je z korozního hlediska klíčový, neboť při něm dochází ke zvýšení rychlosti oxidace. V této práci byly pomocí in-situ elektrochemické impedanční spektroskopie studovány slitiny zirkonia Zr–Nb a Zr–Sn při teplotě 340 °C a tlaku 15 MPa v prostředí, které simulovalo chladivo reaktoru VVER. Cílem dlouhodobých experimentů (až 9000 h) bylo charakterizovat oxidační kinetiku v závislosti na expoziční době a typu zirkoniové slitiny. Výs
APA, Harvard, Vancouver, ISO, and other styles
3

Krausová, A., M. Novák, J. Macák, and I. Kratochvílová. "Polykrystalická diamantová vrstva: vhodná ochrana povrchu zirkoniových slitin?" Koroze a ochrana materialu 59, no. 2 (2015): 50–52. http://dx.doi.org/10.1515/kom-2015-0012.

Full text
Abstract:
Polykrystalická diamantová vrstva (PCD) se jeví jako vhodná ochrana pro snížení chemické reaktivity zirkoniových slitin. Její aplikací by mohlo dojít k výraznému zvýšení odolnosti zirkonia proti vysokoteplotní korozi a rovněž vůči navodíkování. V této práci jsou zkoumány vzorky slitiny zirkonia Zry-2, které byly pokryty 300 nm tenkou vrstvou PCD a pre-exponovány v páře o teplotách 950 a 1150 °C. Pomocí ex-situ elektrochemické impedanční spektroskopie jsou studovány přenosové parametry a morfologie PCD vrstvy. Výsledky ukazují, že vzorky slitiny zirkonia Zry-2, které byly pokryty PCD vrstvou, k
APA, Harvard, Vancouver, ISO, and other styles
4

Marušáková, Daniela, Jan Berka, and Petr Sajdl. "Testování mechanických vlastností Inconelu 713 a 738 pro pokročilé reaktory." Koroze a ochrana materialu 59, no. 4 (2015): 103–6. http://dx.doi.org/10.1515/kom-2015-0021.

Full text
Abstract:
Abstract Mezi kovové konstrukční materiály pro komponenty pokročilých plynem chlazených reaktorů patří niklové superslitiny Inconel 713 a 738. V rámci projektu aplikovaného výzkumu řešeného na VŠCHT Praha a CV Řež byly testovány mechanické vlastnosti těchto slitin ve výchozím stavu a po expozici vzorků v heliu obsahujícím stopové nečistoty (CO, H2, CH4, H2O) při teplotě 900 °C po dobu 1000 hod. Vzorky testovaných slitin byly vyrobeny: a) z původního litého materiálu (virgin), b) přepracovaného materiálu z výroby (revert 100R) a c) materiálu získaného slitím těchto materiálů v poměru 50V/50R. K
APA, Harvard, Vancouver, ISO, and other styles
5

Krausová, A., J. Macák, P. Sajdl, and O. Vénos. "Koroze slitin zirkonia v prostøedí vyšších koncentrací lithia/ Corrosion of zirconium alloys in the environments with elevated concentration of lithium." Koroze a ochrana materialu 58, no. 4 (2014): 95–99. http://dx.doi.org/10.1515/kom-2015-0001.

Full text
Abstract:
Série dlouhodobých in-situ experimentů byla zaměřena na studium negativního vlivu lithných iontů na dva typy slitiny zirkonia s niobem Zr1Nb. Chování slitin bylo sledováno pomocí in-situ aplikovaných elektrochemických metod v experimentální vysokotlaké - vysokoteplotní smyčce (280 °C, 8 MPa), umožňující cirkulaci média. Experimenty byly prováděny jak v prostředí, které simuluje běžné složení chladiva reaktoru typu VVER, tak v prostředí o vyšších koncentracích lithia (70 a 200 mg l-1 Li+ ve formě LiOH). V obou typech expozičního prostředí bylo cílem sledovat přenosové parametry oxidické vrstvy,
APA, Harvard, Vancouver, ISO, and other styles
6

Herkenrath, Heinz. "Slitting of Core Paper -Cost Saving and Slitting Quality Improvement throug Slitting Process Automation-." JAPAN TAPPI JOURNAL 61, no. 11 (2007): 1329–32. http://dx.doi.org/10.2524/jtappij.61.1329.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stefanik, Andrzej, Piotr Szota, Sebastian Mróz, and Henryk Dyja. "Slitting Criterion for Various Slitting Roll Geometry in MSR Rolling Process." Solid State Phenomena 165 (June 2010): 365–70. http://dx.doi.org/10.4028/www.scientific.net/ssp.165.365.

Full text
Abstract:
The main idea of multi slit rolling (MSR) technology is the capability of producing two, three, four and even five rods simultaneously from a single strip in a hot rolling process. Correct separation of the joined strips is one of the major problems in the MSR process. High tensile stresses (perpendicular to the rolling direction) are generated during movement of the band by the slitting rolls in the joining bridge. Critical value of the slitting criterion is mainly affected by geometry of the slitting rolls (angle, dimension and mass of the slitting rolls), temperature of the band and rolling
APA, Harvard, Vancouver, ISO, and other styles
8

Zheng, Zhong Peng, Xin Yang Jiang, and Xin Jin. "Research on Modal Analysis of Precision Micro Slitting Turn-Milling Machine Tool Based on Hammer Experimental Method." Solid State Phenomena 295 (August 2019): 67–72. http://dx.doi.org/10.4028/www.scientific.net/ssp.295.67.

Full text
Abstract:
In order to improve the dynamic stability of precision micro slitting turn-milling machine tools, reduce or avoid the vibration problem during the cutting process, optimize the machine structure and processing parameters, the modal analysis of precision micro slitting turn-milling machine tool based on hammer experimental method was researched. In this paper, by analyzing the mechanism of precision micro slitting turn-milling machine tools, the multi degree-of-freedom mathematical vibration model of precision slitting turn-milling machine tools is constructed. The precision micro turn-milling
APA, Harvard, Vancouver, ISO, and other styles
9

Starkov, N. V., and Yu L. Bobarikin. "Choosing the Slitting Method and the Profile of the Slitting Rolls for Rolling and Slitting." Metallurgist 59, no. 5-6 (2015): 390–95. http://dx.doi.org/10.1007/s11015-015-0115-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mahmoudi, Amir Hossein, Soroush Heydarian, and Kourosh Behnam. "Numerical and Experimental Study of the Plasticity Effect on Residual Stress Measurement Using Slitting Method." Materials Science Forum 768-769 (September 2013): 107–13. http://dx.doi.org/10.4028/www.scientific.net/msf.768-769.107.

Full text
Abstract:
Residual Stress measurement has gained interests among researchers for many years. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting suffers from the level of plasticity occurs within the sample while cutting. In the present research, slitting method was simulated using finite element analysis. The correct performance of the slitting method procedure was explored using known residual stress fields. Then, simulations of the quenching
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Slitina"

1

Klepárníková, Eliška. "Interakce poloroztavené slitiny s pevným materiálem při vzájemném pohybu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-442481.

Full text
Abstract:
This thesis is deals with the suitability of Ag-Sn-Sb alloy for extrusion and selection of suitable materiál for the extruder nozzle. The theoretical part of this thesis deals with the general possibilities of 3D metal printing, especially the metal printing in the semi-solid phase and with it‘s problems. The experimental part describes the development of semi-solid alloys testing device and the research od the alloy and its interactions with solid materials in mutual motion. Analyzis of mechanical and chemical influence between alloy and solid material were performed by visual investigation a
APA, Harvard, Vancouver, ISO, and other styles
2

Pišek, David. "Vysoce-entropické slitiny – objemové slitiny a povrchové úpravy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318856.

Full text
Abstract:
Master‘s thesis deals with the preparation and evaluation single-phase high-entropy alloy based on cobalt, chromium, iron, nickel and manganese and its variants strengthened by dispersion of oxidic particles. High-entropy alloy was prepared in powder form by mechanical alloying from the equiatomic proportions of atomic powders. Obtained powder was subsequently compacted by spark plasma sintering. By the method of mechanical alloying were successfully prepared single-phase high-entropy alloy and its variant strengthened by dispersion of nanometric yttria oxides. It has been found that the oxide
APA, Harvard, Vancouver, ISO, and other styles
3

Lekeš, Jonáš. "Výroba dentálních náhrad." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230811.

Full text
Abstract:
Tato práce popisuje části dentálních náhrad, lékařské pojmy, které se s nimi vážou a vysvětluje proces a problematiku koncepce a výroby těchto částí. Různé druhy biomateriálů jako kovy, keramika, polymery či kompozity jsou zde popsány, hlavní důraz je však kladen na titanové a chrom kobaltové slitiny a korozivzdorné oceli. Experimentální část nabízí 2 řešení zlepšení výroby součásti. První část experimentální části se zabývá zlepšením kvality styčné plochy pilíře zvýšením hustoty síťování součásti. Druhá část nabízí nahrazení operace frézování operací vrtání. Byly vybrány nástoje od 4 výrobců.
APA, Harvard, Vancouver, ISO, and other styles
4

Gamanov, Štěpán. "Příprava slitiny s vysokou entropií cestou mechanického legování." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400831.

Full text
Abstract:
This thesis deals with topic of high entropy alloys. The teoretical part explains what are high entropy alloys, how are they different from conventional alloys, how is their chemical composition proposed and what potencial these alloys have. The experimental part describes procedures of preparation of three high entropy alloys witch consists of Co, Cr, Fe, Ni and Ti, where the concentration of all elements except Ti remains the same. These alloys were prepared via mechanical alloying and sintered by SPS process. Crucial part of this thesis is characterization of these three alloys with EDS and
APA, Harvard, Vancouver, ISO, and other styles
5

Kolařík, Martin. "Optimalizace výroby hliníkového odlitku s použitím numerické simulace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401577.

Full text
Abstract:
The master’s thesis deals with the analysis of casting technology of the selected aluminium casting. It is a casting of a part of CNC milling machine and it is cast by gravity casting into a permanent mold. The defects which are the cause of a high percentage of nonconforming production were analyzed. Furthermore, the master’s thesis includes a complete analysis of filling and solidification of this casting in the ProCast simulation program. Numerical simulation results are verified and improved. Then the causes of problematic casting defects are proven on several calculated variants. Measures
APA, Harvard, Vancouver, ISO, and other styles
6

Slabý, Ondřej. "Produktivní obrábění titanových slitin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230126.

Full text
Abstract:
This diploma thesis is focused on a productive machining of titanium alloys. At the beginning it deals about titanium and its alloys. It describes chip generation mechanism, tool blunting and surface quality. Further it contains modern strategies of efficient titanium alloys machining. Then it analyzes contemporary manufacturing technology of hinge made of titanium alloy Ti-6Al-4V in Frentech Aerospace s.r.o. company, and at the end finds possibility of savings by inovation of roughing process.
APA, Harvard, Vancouver, ISO, and other styles
7

Klíma, Jan. "Hluboké vrtání leteckého dílu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230980.

Full text
Abstract:
Diploma thesis deals with problems about deep drilling of aeronautical part made of aluminum alloy EN AW 7075 T7351. This work is focused on the material properties component and current aluminum alloys processing. Further it contains a part delicated to various kinds of technologies of deep drilling, primarily is focused to gun drilling. Describes a tool, technology and conditions in gun drilling of deep holes with focused to analysis of the forces. Then it compares contemporary manufacturing technology of part drilling in cooperation and proposes an innovative technology of manufacturing. Th
APA, Harvard, Vancouver, ISO, and other styles
8

Novotný, Michal. "Technologie CNC výroby součásti z hliníkové slitiny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231248.

Full text
Abstract:
The diploma thesis Technology of CNC production of aluminium alloy part is based on the particular specification of the company FP cz s.r.o. The core of the work lies in the proposal of production technology of the given part made from aluminium alloy which is machined by two universal CNC lathes with operating system FANUC. There is an introduction to the issue of characteristics and machinability of aluminium and its alloys because of coherence of the thesis. Practical part is focusing on the particular proposal of production technology which consists of the casting analysis, method of clamp
APA, Harvard, Vancouver, ISO, and other styles
9

Lačňák, Martin. "Obrábění součásti ze slitiny hliníku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230784.

Full text
Abstract:
The thesis focuses on the technology of production of the turbine-type component in Edwards company. It specifically focuses on the part of the turning production, in which in the first part an analysis of the component and the technologicity of its construction is created. Problematic aspects are analysed in terms of material structure and procedure technology. An evaluation of the former and the new supplier is made in terms of rationalization of material structure and their statistical evaluation of rationalization improvement towards keeping to geometrical tolerances. Grooving tools greatl
APA, Harvard, Vancouver, ISO, and other styles
10

Holubářová, Michaela. "Vliv hyaluronové kyseliny na korozi hořčíkové slitiny AZ31." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-445135.

Full text
Abstract:
Magnesium and its alloys are interesting materials due to their many physical properties. They have considerable potential, especially in medical applications, where they can serve as a material for the production of orthopedic and cardiovascular implants. The disadvantage of these materials is their sensitivity to corrosion. As a result, it is necessary to know the corrosive properties of magnesium and its alloys in contact with substances that occur in the human body. Hyaluronan is a polysaccharide that is naturally present in the human body and can interact with implants. This master's thes
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Slitina"

1

Korozivzdorné oceli a slitiny. Academia, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ólafsson, Sigurður Jón. Slitinn þráður úr köngulóarvef: Ljóð. Skrudda, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mróz, Sebastian. Proces walcowania prętów z wzdłużnym rozdzieleniem pasma. Wydawn. Politechniki Częstochowskiej, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

I, Manokhin A., ed. Teorii͡a︡ neravnovesnoĭ kristallizat͡s︡ii ploskogo slitka. "Nauka", 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Borisov, V. T. Teorii͡a︡ dvukhfaznoĭ zony metallicheskogo slitka. "Metallurgii͡a︡", 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Socialstyrelsen, Sweden. Från slitna honnörsord till praktisk verksamhet: Slutrapport från Socialstyrelsens primärvårdsuppföljning. Socialstyrelsen, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mirsalimov, V. M. Napri͡a︡zhennoe sostoi͡a︡nie i kachestvo nepreryvnogo slitka. "Metallurgii͡a︡", 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Samoĭlovich, I͡U A. Mikrokompʹi͡uter v reshenii zadach kristallizat͡sii slitka. "Metallurgii͡a", 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bukchina, B. Z. Orfograficheskiĭ slovarʹ russkogo i͡a︡zyka: Slitno? razdelʹno? cherez defis? "Ast-Press", 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Echeverria, Edward Joseph. Slitting the sycamore: Christ and culture in the new evangelization. Acton Institute, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Slitina"

1

Satas, Donatas, and John H. Rienau. "Slitting." In Handbook of Pressure Sensitive Adhesive Technology. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4757-0866-0_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gooch, Jan W. "Slitting." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_10760.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gooch, Jan W. "Film Slitting." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4934.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hill, Michael R. "The Slitting Method." In Practical Residual Stress Measurement Methods. John Wiley & Sons, Ltd, 2013. http://dx.doi.org/10.1002/9781118402832.ch4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gere, Charlie. "Slitting Open the Kantian Eye." In Community without Community in Digital Culture. Palgrave Macmillan UK, 2012. http://dx.doi.org/10.1057/9781137026675_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Olson, Mitchell D., Michael R. Hill, Jeremy S. Robinson, Adrian T. DeWald, and Victor Sloan. "Residual Stress Mapping with Multiple Slitting Measurements." In Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21765-9_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dolanc, Gregor. "Tension Control in a Steel Slitting Line." In Case Studies in Control. Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5176-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Olson, Mitchell D., Adrian T. DeWald, and Michael R. Hill. "Regularization Uncertainty in Slitting Residual Stress Measurement." In Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 6. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-30098-2_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ruud, C. O., and M. E. Jacobs. "Residual Stresses Induced by Slitting Copper Alloy Strip." In Nondestructive Characterization of Materials VI. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2574-5_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

DeWald, Adrian T., and Michael R. Hill. "Repeatability of Incremental Hole Drilling and Slitting Method Residual Stress Measurements." In Conference Proceedings of the Society for Experimental Mechanics Series. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00876-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Slitina"

1

Zanon, Andrea, and Sunil Kumar Das. "5-STRAND SLITTING PROCESS: IMPLEMENTATION AND RESULTS." In 54º Seminário de Laminação e Conformação. Editora Blucher, 2017. http://dx.doi.org/10.5151/1983-4764-30965.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Frezza, F., M. Gu, and P. Lampariello. "A Novel Phased Array of Slitied Asymmetric Ridge Waveguides." In 19th European Microwave Conference, 1989. IEEE, 1989. http://dx.doi.org/10.1109/euma.1989.333985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Golabczak, A., Piotr Niedzielski, Stanislaw Mitura, and J. Zak. "Nanotribological investigations of NCD coatings covering metal slitting saws." In XII Conference on Solid State Crystals: Materials Science and Applications, edited by Antoni Rogalski, Jaroslaw Rutkowski, Andrzej Majchrowski, and Jerzy Zielinski. SPIE, 1997. http://dx.doi.org/10.1117/12.276202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Stefanik, Andrzej, Sebastian Mróz, Piotr Szota, and Henryk Dyja. "Determination Of Slitting Criterion Parameter During The Multi Slit Rolling Process." In MATERIALS PROCESSING AND DESIGN; Modeling, Simulation and Applications; NUMIFORM '07; Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes. AIP, 2007. http://dx.doi.org/10.1063/1.2740978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hussmann, Stephan, Wolfram Kleuver, Bernd Guenther, Joerg Groeneweller, and Holger Rath. "Automatic measurement equipment for quality control in the loop-slitting department." In International Symposium on Photonics and Applications, edited by Robert A. Lieberman, Anand K. Asundi, and Hiroshi Asanuma. SPIE, 1999. http://dx.doi.org/10.1117/12.369323.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Xin, Dawei Zhang, Yinfeng Xia, Yingsong Li, and Tao Jiang. "A Bandwidth Enhaning 5G Soltted Antenna Operating 3.5GHz with Slitting Patches." In 2021 IEEE 4th International Conference on Electronic Information and Communication Technology (ICEICT). IEEE, 2021. http://dx.doi.org/10.1109/iceict53123.2021.9531160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pang, Jin-xuan, and Wen-ying Ding. "The model for the optimal procurement in steel slitting and distributing centers." In EM 2011). IEEE, 2011. http://dx.doi.org/10.1109/icieem.2011.6035321.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hosseinzadeh, Foroogh, P. John Bouchard, and M. Burak Toparli. "Slitting and Contour Method Residual Stress Measurements in an Edge Welded Beam." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25690.

Full text
Abstract:
Welding is known to introduce complex three-dimensional residual stresses of substantial magnitude into pressure vessels and pipe-work. For safety-critical components, where welded joints are not stress-relieved, it can be of vital importance to quantify the residual stress field with high certainty in order to perform a reliable structural integrity assessment. Finite element modeling approaches are being increasingly employed by engineers to predict welding residual stresses. However, such predictions are challenging owing to the innate complexity of the welding process [1]. The idea of crea
APA, Harvard, Vancouver, ISO, and other styles
9

Hui, Jing, and Hui He. "Tension Control System without Sensor for Slitting Stainless Steel Strip into Wires." In 2010 International Conference on Electrical and Control Engineering (ICECE 2010). IEEE, 2010. http://dx.doi.org/10.1109/icece.2010.1055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ghozzi, Y., C. Labergere, and K. Saanouni. "Numerical simulation of thick sheet slitting processes: Modelling using continuum damage mechanics." In THE 11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES: NUMIFORM 2013. AIP, 2013. http://dx.doi.org/10.1063/1.4806844.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Slitina"

1

Prime, Michael Bruce. Training package 1 for slitting data analysis. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1209277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Prime, Michael B., Manuel L. Lovato, David J. Alexander, Timothy V. Beard, Kester D. Clarke, and Bo S. Folks. Incremental Slitting Residual Stress Measurements for a Hot Cell. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1131008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

A machine operator's helper died when caught in a slitting machine. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2006. http://dx.doi.org/10.26616/nioshsface06ca002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

A helper on a steel-slitting machine died when caught in between some sheet metal and the rewind cylinder. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2006. http://dx.doi.org/10.26616/nioshsface05ca003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Health hazard evaluation report: HETA-2008-0091-3118, evaluation of metal and carbon monoxide exposures during steel slab cutting and slitting - Indiana. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2010. http://dx.doi.org/10.26616/nioshheta200800913118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Slitina' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography