Log in

Relevant bibliographies by topics / Stereoscopic system

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Stereoscopic system'

Author: Grafiati

Published: 4 June 2021

Last updated: 5 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Stereoscopic system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Stereoscopic system"

1

Király, Zsolt. "Stereoscopic vision system." Optical Engineering 45, no. 4 (2006): 043006. http://dx.doi.org/10.1117/1.2189856.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Shin, Hyoung-Chul, Sang-Hoon Kim, and Kwang-Hoon Sohn. "Hybrid Stereoscopic Camera System." Journal of Broadcast Engineering 16, no. 4 (2011): 602–13. http://dx.doi.org/10.5909/jeb.2011.16.4.602.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Eguchi, Shuichiro. "Stereoscopic Ophthalmic Microendoscope System." Archives of Ophthalmology 115, no. 10 (1997): 1336. http://dx.doi.org/10.1001/archopht.1997.01100160506028.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Balogh, Attila, Mark C. Preul, Mark Schornak, Michael Hickman, and Robert F. Spetzler. "Intraoperative stereoscopic QuickTime Virtual Reality." Journal of Neurosurgery 100, no. 4 (2004): 591–96. http://dx.doi.org/10.3171/jns.2004.100.4.0591.

Full text

Abstract:

Object. The aim of this study was to acquire intraoperative images during neurosurgical procedures for later reconstruction into a stereoscopic image system (QuickTime Virtual Reality [QTVR]) that would improve visualization of complex neurosurgical procedures. Methods. A robotic microscope and digital cameras were used to acquire left and right image pairs during cranial surgery; a grid system facilitated image acquisition with the microscope. The surgeon determined a field of interest and a target or pivot point for image acquisition. Images were processed with commercially available software and hardware. Two-dimensional (2D) or interlaced left and right 2D images were reconstructed into a standard or stereoscopic QTVR format. Standard QTVR images were produced if stereoscopy was not needed. Intraoperative image sequences of regions of interest were captured in six patients. Relatively wide and deep dissections afford an opportunity for excellent QTVR production. Narrow or restricted surgical corridors can be reconstructed into the stereoscopic QTVR mode by using a keyhole mode of image acquisition. The stereoscopic effect is unimpressive with shallow or cortical surface dissections, which can be reconstructed into standard QTVR images. Conclusions. The QTVR system depicts multiple views of the same anatomy from different angles. By tilting, panning, or rotating the reconstructed images, the user can view a virtual three-dimensional tour of a neurosurgical dissection, with images acquired intraoperatively. The stereoscopic QTVR format provides depth to the montage. The system recreates the dissection environment almost completely and provides a superior anatomical frame of reference compared with the images captured by still or video photography in the operating room.

APA, Harvard, Vancouver, ISO, and other styles

5

Baasantseren, Ganbat, Duc-Dung Do, Ki-Cheol Kwon, and Nam Kim. "Stereoscopic Floating Image System Using Stereoscopic Display and Two Lenses." Journal of the Optical Society of Korea 10, no. 2 (2006): 76–80. http://dx.doi.org/10.3807/josk.2006.10.2.076.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jia, Chen Yu, Ze Hua Gao, Xun Bo Yu, Xin Zhu Sang, and Tian Qi Zhao. "Auto-Stereoscopic 3D Video Conversation System Based on an Improved Eye Tracking Method." Applied Mechanics and Materials 513-517 (February 2014): 3907–10. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.3907.

Full text

Abstract:

An auto-stereoscopic 3D video conversation system is demonstrated with an improved eye-tracking method based on a lenticular sheet and two cameras. The two cameras are used to get stereoscopic picture pairs and addressed the viewers position by an Improved Eye Tracking Method. The computer combines the stereoscopic picture pairs with different masks graphic processing unit. Low crosstalk correct stereoscopic video pairs for the end-to-end commutation are achieved.

APA, Harvard, Vancouver, ISO, and other styles

7

Yu, Jia Xi, and Wen Hui Zhang. "Design of 3D-TV Horizontal Parallax Obtaining System Based on FPGA." Applied Mechanics and Materials 401-403 (September 2013): 1834–38. http://dx.doi.org/10.4028/www.scientific.net/amm.401-403.1834.

Full text

Abstract:

In this paper, a design of FPGA-based 3D-TV horizontal parallax acquiring system is presented. The system will receive the stereoscopic video by a HD-SDI receiver GS2971, and outputs a video of horizontal parallax to a digital TV through a HDMI transmitter SiI9134. In this system, FPGA plays an important role that converts the stereoscopic video to the horizontal parallax video. In addition, a microcontroller is selected as the control center of the entire system. This system can get the horizontal parallax of the stereoscopic video in real time, and is helpful for the stereoscopic program producer to control the horizontal parallax of the 3D program.

APA, Harvard, Vancouver, ISO, and other styles

8

Gašo, Martin, Martin Krajčovič, Ľuboslav Dulina, Patrik Grznár, and Juraj Vaculík. "Methodology of Creating and Sustainable Applying of Stereoscopic Recording in the Industrial Engineering Sector." Sustainability 11, no. 8 (2019): 2194. http://dx.doi.org/10.3390/su11082194.

Full text

Abstract:

This article introduces an innovative view on the issue of Stereoscopy’s application as a tool of advanced industrial engineering. Basic starting points of research have been the results of stereoscopy applications in other science areas and entertainment industries, e.g., movies. These bases provide information about basic principles of stereoscopic record creation. However, these bases’ pieces of information were to be adapted and applied in the field of industrial engineering. The core of the article describes the methodology for creating a stereoscopic recording in industrial engineering. The emphasis aimed to use stereoscopic in industrial engineering as a tool for optimization of the workplace, which makes them sustainable for a long time. The output of the article is a tool for industrial engineering which prevents job rotation caused by wear of body parts. Also as a result of optimization, we achieve a saving of capital. The article describes the proposed procedure for creating a stereoscopic record from the basic selection of suitable technical equipment to a detailed calculation of the camera system parameters setting. The final part of the article is devoted to the practical verification of the proposed stereoscopic record procedure and also the verification of the possibilities of its use in the field of industrial engineering. An area of ergonomics has been selected for the pilot verification. The verification confirmed the accuracy of the calculation, i.e., usability of the proposed stereoscopic record procedure. Identified also was a potential for its use as an innovative tool for advanced industrial engineering. The crux of the methodology presented is protected by the utility model number 7683.

APA, Harvard, Vancouver, ISO, and other styles

9

Sakamoto, Kunio, Kazuki Saruta, and Kazutoki Takeda. "Monocular Stereoscopic 3-D Display System." Journal of the Institute of Image Information and Television Engineers 54, no. 3 (2000): 388–93. http://dx.doi.org/10.3169/itej.54.388.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

TIE Zhi-cheng, 帖志成, 梁发云 LIANG Fa-yun, 黄伟莉 HUANG Wei-li, 王婧 WANG Jing, and 何小明 HE Xiao-ming. "Stereoscopic Display Based on Embedded System." Chinese Journal of Liquid Crystals and Displays 28, no. 1 (2013): 71–75. http://dx.doi.org/10.3788/yjyxs20132801.0071.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Stereoscopic system"

1

Lo, Haw-Jing. "Real-time stereoscopic vision system." Thesis, Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/14911.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Prakash, Deepak. "Stereoscopic 3D viewing systems using a single sensor camera." The Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=osu1196268883.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Alden, Curtis W. "A stereoscopic image analysis system to locate and characterize nursery plants." Connect to resource, 1989. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1200586191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Asbery, Richard. "The design, development and evaluation of an active stereoscopic telepresence system." Thesis, University of Surrey, 1997. http://epubs.surrey.ac.uk/843020/.

Full text

Abstract:

The work presented in this thesis documents the design, development and evaluation of a high performance stereoscopic telepresence system. Such a system offers the ability to enhance the operator perception of a remote and potentially hazardous environment as an aid to performing a remote task. To achieve this sensation of presence demands the design of a highly responsive remote camera system. A high performance stereo platform has been designed which utilises state- of-the-art cameras, servo drives and gearboxes. It possesses four degrees of freedom; pan, elevation and two camera vergence motions, all of which are controlled simultaneously in real-time by an open architecture controller. This has been developed on a PC/AT bus architecture and utilises a PID control regime. The controller can be easily interfaced to a range of input devices such as electromagnetic head tracking systems which provide the trajectory data for controlling the remote mechatronic platform. Experiments have been performed to evaluate both the mechatronic system and operator oriented performance aspects of the telepresence system. The mechatronic system investigations identify the overall system latency to be 80ms, which is considerably less than other current systems. The operator oriented evaluation demonstrates the necessity for a head tracked telepresence system with a head mounted display system. The need for a low latency period to achieve high operator performance and comfort during certain tasks is also established. This is evident during trajectory following experiments where the operator is required to track a highly dynamic target. The telepresence system has been fully evaluated and demonstrated to enhance operator spatial perception via a sensation of visual immersion in the remote environment.

APA, Harvard, Vancouver, ISO, and other styles

5

Thulin, Oskar. "Intermediate View Interpolation of Stereoscopic Images for 3D-Display." Thesis, Linköping University, Department of Electrical Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7651.

Full text

Abstract:

<p>This thesis investigates how disparity estimation may be used to visualize an object on a 3D-screen. The first part looks into different methods of disparity estimation, and the second part examines different ways to visualize an object from one or several stereo pairs and a disparity map. Input to the system is one or several stereo pairs, and output is a sequence of images of the input scene but from more angles. This sequence of images can be shown on Setred AB's 3D-screen. The system has high real time demands and the goal is to do the disparity estimation and visualization in real time.</p><p>In the first part of the thesis, three different ways to calculate disparity maps are implemented and compared. The three methods are correlation-based, local structure-based and phase-based techniques. The correlation-based methods cannot satisfy the real-time demands due to the large number of 2D-convolutions required per pixel. The local structure-based methods have too much noise and cannot satisfy the quality requirements. Therefore, the best method by far is the phase-based method. This method has been implemented in Matlab and C and comparisons between the different implementations are presented.</p><p>The quality of the disparity maps is satisfying, but the real-time demands cannot yet be fulfilled. The future work is therefore to optimize the C code and move some functions to a GPU, because a GPU can perform calculations in parallel with the CPU. Another reason is that many of the calculations are related to resizing and warping, which are well-suited to implementation on a GPU.</p>

APA, Harvard, Vancouver, ISO, and other styles

6

Ericsson, Martin. "3DIS4U: Design and Implementation of a Distributed Visualization System with a Stereoscopic Display." Thesis, Uppsala University, Department of Information Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-98330.

Full text

Abstract:

<p>Stereoscopic displays have been used in research as an aid for visualizations, but often they end up in a special room only to be used by a small selected audience. How should such a system be setup to make it more available to a larger group of users? We try to solve this by setting up the system in a regular lecture room, an environment already known by our users and by modifying software to make the transition from monoscopic displays to stereoscopic displays as smooth as possible. To improve the usability further, we choose to connect the stereoscopic installation to a high-performance computing (HPC) cluster. As a result, we offer our users to distribute their visualizations and by that the ability to use larger data sets.</p><p>There are two goals for this master thesis. The first goal is to setup a stereoscopic display in a regular class room environment. The second goal is to enable distributed visualization at our graphics lab and evaluate further development in this field. The first goal is accomplished by setting up the hardware and thereafter focus on making the system more usable. Three different ways will be presented, one by using the Visualization Toolkit (VTK), another by developing a small C++ library for converting existing visualizations to the stereoscopic display. And the final option is non-invasive stereoscopic visualization with the Chromium library. The second goal is realized by installing and configuring ParaView, a visualization application for distributedvisualizations on a cluster connected to the stereoscopic display. Exploration ofalternative ways of performing visualization on the Graphics Processing Unit (GPU) is also concluded.</p><p>The result of this master thesis work is primarily a lecture room that in a matter of a few minutes is turned into a visualization studio with a stereoscopic display for up to 30 simultaneous viewers. The result is also an extended version of VTK for our stereoscopic display, a C++ library meant to help users to port their program for stereoscopic visualization and some examples on how to use Chromium for noninvasive stereoscopic rendering. Furthermore, we have made ParaView available to HPC users by installing and configuring it on one of UPPMAX clusters.</p>

APA, Harvard, Vancouver, ISO, and other styles

7

Dormand, Jamie. "The proof of concept of a fused radiometric and optical stereoscopic imaging system." Thesis, University of Liverpool, 2014. http://livrepository.liverpool.ac.uk/19215/.

Full text

Abstract:

The proof of concept of a fused radiometric and optical stereoscopic imaging device is presented. The project was in collaboration with the National Nuclear Laboratory and the Nuclear Decommissioning Authority with the aim of developing a sensor that can be deployed in a nuclear decommissioning environment. The radiometric system was a Compton camera comprised of two HPGe planar detectors and presents a significant improvement in efficiency and dynamic range over coded aperture systems currently used in industry. The optical stereoscopic camera is the proprietary Bumblebee XB3 system that provides 3D physical information of the surroundings. Two main experiments are presented; the first investigated the disparity between true source location and reconstructed image position. This disparity was proven and methods for accounting for and correcting it were developed, whereby the image position accuracy was improved by a factor of 26.7. The second experiment imaged 20 MBq $^{137}$Cs sources at distances of 80 - 150 cm with both radiometric and optical stereoscopic systems simultaneously. The first fused images were produced using this data, with the radiometric sources and surroundings clearly visible. A GUI was developed in Matlab to process and fuse the data. Alongside both experiments image optimisation techniques were investigated. Pulse shape analysis was implemented and shown to improve image resolution by 30\% on average at the expense of efficiency. Fold 2 event imaging was conversely shown to improve efficiency at the expense of image resolution. This work provides the basis to develop the project towards a complete system. The steps that must be taken to realise this are outlined and recommendations for overcoming potential challenges are discussed.

APA, Harvard, Vancouver, ISO, and other styles

8

Wong, Wing Shun. "The effects of matching lens focus with stereoscopic depth cues on the time taken to form a single stereoscopic image when viewing a binocular display : system prototyping and experimentation /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?IELM%202007%20WONGW.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Winterbottom, Marc. "Individual Differences in the Use of Remote Vision Stereoscopic Displays." Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1433453135.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Spengler, Gerrit Christian. "Search for dark matter in the Milky Way halo with the High Energy Stereoscopic System." Doctoral thesis, Humboldt-Universität zu Berlin, Mathematisch-Naturwissenschaftliche Fakultät I, 2014. http://dx.doi.org/10.18452/16897.

Full text

Abstract:

In dieser Arbeit wird mit Hilfe von Daten, die mit dem High Energy Stereocopic System (H.E.S.S.) in Namibia aufgenommen wurden, indirekt nach dunkler Materie im Halo der Milchstraße gesucht<br>An indirect search for the presence of dark matter particles in the halo of the Milky Way with data that were recorded with the High Energy Stereoscopic System (H.E.S.S.) is discussed in this work

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Stereoscopic system"

1

Mahowald, Misha. An analog VLSI system for stereoscopic vision. Kluwer Academic Publishers, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mahowald, Misha. An Analog VLSI System for Stereoscopic Vision. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2724-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Calder, Peter A. Design and evaluation of a stereoscopic viewing system for underground excavations. National Library of Canada, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Rechsteiner, Martin. Real time inverse stereo system for surveillance of dynamic safety envelopes. Hartung-Gorre, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

3DIY: Stereoscopic moviemaking on an indie budget. Elsevier, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Poletti, Charles E. Stereo atlas of operative microneurosurgery. Mosby, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Woods, Andrew J. Stereoscopic displays and applications XX: 19-21 January 2008, San Jose, California. SPIE, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Woods, Andrew J. Stereoscopic displays and applications XIX: 23-30 January 2008, San Jose, California. SPIE, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Woods, Andrew J. Stereoscopic displays and applications XIX: 23-30 January 2008, San Jose, California. Edited by IS & T--the Society for Imaging Science and Technology, Society of Photo-optical Instrumentation Engineers, IMAX Corporation, REAL D. (Firm), Christie Digital Systems, and 3D Biz-Ex (Firm). SPIE, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Woods, Andrew J. Stereoscopic displays and applications XX: 19-21 January 2008, San Jose, California. Edited by IS & T--the Society for Imaging Science and Technology, SPIE (Society), IMAX Corporation, and DepthQ Stereoscopic. SPIE, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Stereoscopic system"

1

Mahowald, Misha. "System." In An Analog VLSI System for Stereoscopic Vision. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2724-4_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Diner, Daniel B., and Derek H. Fender. "Setting up a Stereoscopic Camera System." In Human Engineering in Stereoscopic Viewing Devices. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4899-1274-9_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Surman, Phil. "Stereoscopic and Autostereoscopic Displays." In 3D-TV System with Depth-Image-Based Rendering. Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-9964-1_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Jung, Ira. "H.E.S.S. - The High Energy Stereoscopic System." In Astrophysical Sources of High Energy Particles and Radiation. Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-0560-9_30.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Diner, Daniel B., and Derek H. Fender. "Stereoscopic Properties of the Human Visual System." In Human Engineering in Stereoscopic Viewing Devices. Springer US, 1993. http://dx.doi.org/10.1007/978-1-4899-1274-9_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mahowald, Misha. "Synthesis." In An Analog VLSI System for Stereoscopic Vision. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2724-4_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mahowald, Misha. "The Silicon Retina." In An Analog VLSI System for Stereoscopic Vision. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2724-4_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Mahowald, Misha. "The Silicon Optic Nerve." In An Analog VLSI System for Stereoscopic Vision. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2724-4_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mahowald, Misha. "Stereopsis." In An Analog VLSI System for Stereoscopic Vision. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2724-4_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Xu, H. H., Xiang Feng Li, Dun Wen Zuo, and Min Wang. "Double-CCD Stereoscopic Vision System Monitoring Chip Shape." In Advances in Machining & Manufacturing Technology VIII. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-999-7.66.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Stereoscopic system"

1

Banks, Martin S., Jenny R. Read, Robert S. Allison, and Simon J. Watt. "Stereoscopy and the Human Visual System." In SMPTE Stereoscopic 3D Conference. IEEE, 2011. http://dx.doi.org/10.5594/m001418.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Welsh, Richard, and Christian Ralph. "A Perception Based System for Depth Metadata." In SMPTE Stereoscopic 3D Conference. IEEE, 2011. http://dx.doi.org/10.5594/m001425.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Akar, Gozde B., and Atanas Gotchev. "MOBILE3DTV: Content Delivery Optimization over DVB-H System." In SMPTE Stereoscopic 3D Conference. IEEE, 2010. http://dx.doi.org/10.5594/m001417.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bergeron, Michael A. "Simplicity vs. Flexibility; an Integrated System Approach to Stereography." In SMPTE Stereoscopic 3D Conference. IEEE, 2010. http://dx.doi.org/10.5594/m001401.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Brune, Thomas, Nicola M. Gutberlet, Ralf Tanger, and Dirk Gandolph. "A Unified Trifocal System for Advanced Depth-Based 3D Capture." In SMPTE Stereoscopic 3D Conference. IEEE, 2011. http://dx.doi.org/10.5594/m001422.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ahmed, Yasser A., and Hossam Afifi. "New stereoscopic system." In Electronic Imaging '99, edited by John O. Merritt, Mark T. Bolas, and Scott S. Fisher. SPIE, 1999. http://dx.doi.org/10.1117/12.349395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Melkumov, Alexander. "3D Shooting with a Single Digital Camera with the Use of 3D Lenses of the Stereoscopic System “Stereo-70”." In SMPTE Stereoscopic 3D Conference. IEEE, 2010. http://dx.doi.org/10.5594/m001400.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Calderon, A., M. Dembele, B. Hossain, Y. Noor, and S. Ovsiew. "Stereoscopic Motion Tracking System." In 2011 37th Annual Northeast Bioengineering Conference (NEBEC). IEEE, 2011. http://dx.doi.org/10.1109/nebc.2011.5778564.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Poulin-Girard, Anne-Sophie, Simon Thibault, and Denis Laurendeau. "Passive stereoscopic panomorph system." In IS&T/SPIE Electronic Imaging, edited by Atilla M. Baskurt and Robert Sitnik. SPIE, 2013. http://dx.doi.org/10.1117/12.2003089.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Calderon, A., M. Dembele, B. Hossain, Y. Noor, and S. Ovsiew. "Stereoscopic Motion Tracking System." In ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-53688.

Full text

Abstract:

The “National Institute of Neurological Disorders and Stroke” defines Cerebral Palsy as a neurological disorder that affects body movement and muscle coordination. This condition usually appears at birth or during the first three years of life [3]. Treatment for children with Cerebral Palsy is extensive and can include any or all of the following: physical/occupational therapy, speech therapy, medicine, surgery, and orthopedic devices. Physical therapy involves having the child perform several repetitions of a set of exercises that will target the specific muscle group that needs to be worked on. A technique that has recently been employed in physical therapy is the use of video games [2], this allows the therapist to have the child perform similar sets of exercises while at the same time motivate and entertain the child.

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Stereoscopic system"

1

Pardini, A. F. System design description for the LDUA high resolution stereoscopic video camera system (HRSVS). Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/10148081.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Pardini, A. F. ,. Westinghouse Hanford. Operation and maintenance manual for the high resolution stereoscopic video camera system (HRSVS) system 6230. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/663154.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pardini, A. F. Calibration grooming and alignment for LDUA High Resolution Stereoscopic Video Camera System (HRSVS). Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/10154319.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pardini, A. F. ,. Westinghouse Hanford. Post-Delivery test report for light duty utility arm high resolution stereoscopic video system (HRSVS). Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/658918.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Frazier, John W., Joe W. McDaniel, Vance D. Skowronski, Nilss M. Aume, and Donald F. Stewart. Body Displacement Measured during Sustained +GZ, -GZ and + or -GY Acceleration Using a Stereoscopic Photographic System. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada197988.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bodenhamer, Andrew S. Assessment of Stereoscopic Display Systems for Assisting in Route Clearance Manipulation Planning Tasks. Defense Technical Information Center, 2007. http://dx.doi.org/10.21236/ada471379.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ruiz, Pablo, Craig Perry, Alejando Garcia, et al. The Everglades National Park and Big Cypress National Preserve vegetation mapping project: Interim report—Northwest Coastal Everglades (Region 4), Everglades National Park (revised with costs). National Park Service, 2020. http://dx.doi.org/10.36967/nrr-2279586.

Full text

Abstract:

The Everglades National Park and Big Cypress National Preserve vegetation mapping project is part of the Comprehensive Everglades Restoration Plan (CERP). It is a cooperative effort between the South Florida Water Management District (SFWMD), the United States Army Corps of Engineers (USACE), and the National Park Service’s (NPS) Vegetation Mapping Inventory Program (VMI). The goal of this project is to produce a spatially and thematically accurate vegetation map of Everglades National Park and Big Cypress National Preserve prior to the completion of restoration efforts associated with CERP. This spatial product will serve as a record of baseline vegetation conditions for the purpose of: (1) documenting changes to the spatial extent, pattern, and proportion of plant communities within these two federally-managed units as they respond to hydrologic modifications resulting from the implementation of the CERP; and (2) providing vegetation and land-cover information to NPS park managers and scientists for use in park management, resource management, research, and monitoring. This mapping project covers an area of approximately 7,400 square kilometers (1.84 million acres [ac]) and consists of seven mapping regions: four regions in Everglades National Park, Regions 1–4, and three in Big Cypress National Preserve, Regions 5–7. The report focuses on the mapping effort associated with the Northwest Coastal Everglades (NWCE), Region 4 , in Everglades National Park. The NWCE encompasses a total area of 1,278 square kilometers (493.7 square miles [sq mi], or 315,955 ac) and is geographically located to the south of Big Cypress National Preserve, west of Shark River Slough (Region 1), and north of the Southwest Coastal Everglades (Region 3). Photo-interpretation was performed by superimposing a 50 × 50-meter (164 × 164-feet [ft] or 0.25 hectare [0.61 ac]) grid cell vector matrix over stereoscopic, 30 centimeters (11.8 inches) spatial resolution, color-infrared aerial imagery on a digital photogrammetric workstation. Photo-interpreters identified the dominant community in each cell by applying majority-rule algorithms, recognizing community-specific spectral signatures, and referencing an extensive ground-truth database. The dominant vegetation community within each grid cell was classified using a hierarchical classification system developed specifically for this project. Additionally, photo-interpreters categorized the absolute cover of cattail (Typha sp.) and any invasive species detected as either: Sparse (10–49%), Dominant (50–89%), or Monotypic (90–100%). A total of 178 thematic classes were used to map the NWCE. The most common vegetation classes are Mixed Mangrove Forest-Mixed and Transitional Bayhead Shrubland. These two communities accounted for about 10%, each, of the mapping area. Other notable classes include Short Sawgrass Marsh-Dense (8.1% of the map area), Mixed Graminoid Freshwater Marsh (4.7% of the map area), and Black Mangrove Forest (4.5% of the map area). The NWCE vegetation map has a thematic class accuracy of 88.4% with a lower 90th Percentile Confidence Interval of 84.5%.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!