Bibliografías temáticas / Aditivní technologie výroby / Tesis
Siga este enlace para ver otros tipos de publicaciones sobre el tema: Aditivní technologie výroby.

Tesis sobre el tema "Aditivní technologie výroby"

Autor: Grafiati
Publicado: 4 de junio de 2021
Última modificación: 11 de febrero de 2022

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte los 18 mejores tesis para su investigación sobre el tema "Aditivní technologie výroby".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.

1

Kopecký, Martin. "Konstrukce transtibiální protézy s využitím aditivní technologie výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230992.

Texto completo
Resumen
The thesis deals with the design of a transtibial prosthesis by additive manufacturing technology. Based on walking biomechanics and the current situation of knowledge a prosthetic foot has been designed for a patient with low level of physical activity. Furthermore, the thesis describes the design of an individual socket for the patient. The socket has been designed by reverse engineer procedure based on the three-dimensional geometry of patient´s stump obtained by 3D scanning. Testing samples of the foot and the socket have been made for the check of functionality of both the devices and the
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Ilčík, Jindřich. "Geometrická přesnost výroby kovových dílů aditivní technologií Selective Laser Melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230995.

Texto completo
Resumen
The presented diploma thesis deals with the control of the geometric accuracy of the parts produced by additive manufacturing technology selective laser melting. The paper first analyzed the work of the other authors dealing with this issue. Based on obtained informations from this analysis were developed benchmark test parts for quality control of production on a commercial machine SLM 280 HL supplied by SLM Solutions GmbH. The work was carried out several tests to determine the appropriate parameters of construction parts. These tests, their results and conclusions are fully described in thi
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Šafl, Pavel. "Použití technologie 3D tisku pro návrh výroby náhradních dílů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442437.

Texto completo
Resumen
This seminar thesis deals with the issue of 3D printing in companies. The aim was to describe additive manufacturing and 3D printing technologies. Moreover, to select the most common materials which are used and describe them. It was also necessary to perform a study of mechanical stresses and prepare a detailed description of the mechanical properties of materials. From these data, methods of use in the automotive industry were described. The most important part was to introduce case studies and create a description of which 3D printing technologies have the fastest return on investment.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Tomeš, Jan. "Analýza přesnosti výroby lamel formy pneumatiky vyráběných SLM technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241858.

Texto completo
Resumen
The first part of the diploma thesis is focused on the analysis and evaluation of the current production of sipes by two SLM devices PXL and M2 Cusing, produced by Phenix Systems and Concept Laser companies. The samples of both machines went through the same manufacturing process and the same process of measurement and evaluation, in order to carry out comparison between individual machines. Geometric accuracy, surface roughness, mechanical properties, and material structure of the samples have been compared. For the sipes it was necessary to create a digital evaluation methodology of geometry
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Mazoch, Jan. "Topologické optimalizace v technické praxi." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400688.

Texto completo
Resumen
Master’s thesis deals with an issue of 3D printing and of using a topological optimization for editing a shape of a 3D printed product. First part of this thesis provides a general description of a subtractive manufacturing technology, specifically its use in CNC milling machines, and of an additive manufacturing technology which is used in 3D printing. Second part of this thesis describes the topological optimization per se and specific methods which are used in the topological optimization. In the third and the fourth part of this thesis, topological optimization modules of software Ansys an
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Tvrdoň, Radek. "3D tisk kovů robotem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443161.

Texto completo
Resumen
The diploma thesis presents an overview of additive production technologies and a summary of technologies used for 3D metal printing using a robot. All of them are generally described and at the same time assigned to their specific commercial use, or the academic research that deals with them. The work examines the suitability of the material EN ISO 14341-A: G 3Si1 for 3D printing, for which a modification of the Col Metal Transfer technology, Cycle Step is used. The experimental printout of the sample is evaluated on the basis of surface and mechanical tests. Capillary test, examination of mi
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Táborský, Pavel. "Využití aditivní technologie pro výrobu dílu pro automobilový průmysl." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417127.

Texto completo
Resumen
The diploma thesis deals with the production process of optical part of headlamp module produced by additive technology. The thesis contains the characteristics of headlamp, current manufacturing technology and description of additive manufacturng methods. The practical part is focused on the production of a reflector using 3D printing. The conclusion of the thesis is dedicated to the measuring of light output and its evaluation.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Vocílka, Ondřej. "Využití aditivní technologie pro návrh a výrobu prototypu oční protézy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402543.

Texto completo
Resumen
This diploma thesis has an aim to fabricate a prototype of esthetical prosthesis using solely Rapid Prototyping aditive technology and to explore the possibility of using commercially available biocompatible materials. In the theoretical part, a description of types of ocular prosthesis types with the focus being on esthetic ocular prosthesis. is given. The practical part of the work offers a comprehensive view on the whole process of the prototype fabrication. It provides a description of creating the 3D model by scanning, geometrical adjustments of the model, textures mapping, print optimiza
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Nakládalová, Tereza. "Konstrukční optimalizace výrobní linky využitím aditivní technologie SLS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382472.

Texto completo
Resumen
This diploma thesis is focused on additive manufacturing, especially on technology Selective Laser Sintering (SLS) and the implementation of additive manufacturing into existing departments of industry, where current elements of systems are supplemented or directly replaced by new parts produced by these technologies. This thesis solves specific project of manipulation unit for manufacturing line. The main goals of the issue are analysis of current construction design and its deficiency, designing and optimalization of this unit in relation to SLS manufacturing technology, product realization
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Vrána, Radek. "Návrh porézních struktur pro aditivní výrobu technologií selective laser melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231472.

Texto completo
Resumen
Metal additive technology allows to create objects with complex shape that are very difficult to produce by conventional technologies. An example of such component is a porous structure which is composed of periodical truss cells. This diploma thesis deals with the prediction of the mechanical properties of very small lattice structures made of additive manufacturing technology Selective Laser Melting. Using the proposed test specimens it was found that real dimensions of the trusses varies with size and orientation to the base platform. It was proposed and tested samples for rod tensile test
Los estilos APA, Harvard, Vancouver, ISO, etc.
11

Pospíšil, Jan. "Výroba dílů s odlehčenou strukturou a topologickou optimalizací." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417569.

Texto completo
Resumen
This thesis deals vith the design of welding torch holder using topology optimization and lattice structure. The objective of this thesis is gaining knowledge about topology optimization in different software and aplication of methods to that part. Conclusion of this thesis is about production design and economic evaluation.
Los estilos APA, Harvard, Vancouver, ISO, etc.
12

Robl, Jan. "Využití kovové aditivní technologie při výrobě oběžného axiálního kola turbínového motoru pomocné energetické jednotky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417561.

Texto completo
Resumen
The thesis deals with the possible use of additive technology in the production of strong thermally exposed components of turbine engines. The first part of the thesis is dedicated to the issue of processing heat-resistant materials by SLM method, introduction of conventional production of selected part and outline of currently used progressive methods in precision casting technology. These theoretical findings are further applied in the practical part of the thesis, which deals with the analysis of mechanical properties of cast and printed material IN 939. Experimental part also includes prod
Los estilos APA, Harvard, Vancouver, ISO, etc.
13

Měchura, Lukáš. "Vývoj procesních parametrů technologie Selective Laser Melting pro výrobu lisovací formy pneumatik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-444403.

Texto completo
Resumen
The diploma thesis deals with finding suitable process parameters for the production of molding segment by SLM technology. It consists of a combination of structures, shells, thin slats and bulk parts. The tested material is maraging steel 300. The research part deals with the problem of choice of suitable process parameters, such as laser power and speed, hatch distance and thickness of the built layer. The achievable mechanical properties of the parts and the choice of the suitable structure were also examined. In the thesis were found suitable process parameters for printing of bulk parts a
Los estilos APA, Harvard, Vancouver, ISO, etc.
14

Pospíšil, Josef. "Aplikace moderních technologií pro výrobu prototypové formy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318765.

Texto completo
Resumen
This Diploma Thesis deals with modern technologies such as 3D scanning, rapid prototyping and vacuum casting to production of prototype form. It considers advantages and disadvantages of the modern technologies compared to traditional process of manufacturing prototype form and economical contribution using the modern technologies. Part of the thesis considers a choice of suitable manufacturing technology of a particular product.
Los estilos APA, Harvard, Vancouver, ISO, etc.
15

Lasota, Marek. "Návrh protetického chodidla s využitím aditivních výrobních technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382165.

Texto completo
Resumen
Subject of this diploma thesis is a design of a prosthetic foot for an additive manufacturing. It is a dynamic foot made of plastic, designed for an 80 kg patient with a second level of a movement aktivity. From a few concepts is chosen one, which is then optimalized and printed with a MJF method. Functional sample is then undergoing static and cyclic tests according to ISO 10328.
Los estilos APA, Harvard, Vancouver, ISO, etc.
16

Dokoupil, Filip. "Zpracování slitiny 2618 pomocí technologie selective laser melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231934.

Texto completo
Resumen
This diploma thesis deals with finding and verification of appropriate technological parameters of SLM technology for the processing of aluminum alloy 2618. In the theoretical part, an introduction to additive manufacturing of aluminum alloys and general description of processes occurring during SLM production is given. Based on general knowledge were designed different types of testing samples produced by sintering the metallurgical powder using 400 W ytterbium fiber laser, which so far in the literature for aluminum alloy 2618 were not described. As the result, the technological parameters d
Los estilos APA, Harvard, Vancouver, ISO, etc.
17

Janás, Patrik. "Pokročilé technologie ve stavebnictví." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392079.

Texto completo
Resumen
The main goal of the diploma thesis Advanced technology in construction industry is to create analysis of possibilities in the area of advanced technologies in the construction industry. Theoretical part is focused mainly on modern system formwork from composite material, on the technology of additive production and technology virtualization. In the practical part there is formwork for the family house designed. The design is made for innovative composite formwork and also for the formwork usually used in construction industry. The thesis is focused on analysis of different costs and effective
Los estilos APA, Harvard, Vancouver, ISO, etc.
18

Vondrášek, Pavel. "Přídatné látky ve vybraných masných výrobcích v ČR." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-351375.

Texto completo
Resumen
Univerzita Karlova v Praze Pedagogická fakulta Katedra pedagogiky DIPLOMOVÁ PRÁCE Přídatné látky ve vybraných masných výrobcích v ČR Food additives in selected meat products of the Czech Republic Pavel Vondrášek Vedoucí práce: Ing. Bc. Alena Váchová, Ph.D. Studijní program: Učitelství pro střední školy Studijní obor: Učitelství všeobecně vzdělávacích předmětů pro základní školy a střední školy pedagogika - výchova ke zdraví 2016 1 ABSTRACT The issue of food additives is a very hot topic in the current society. This fact has been recently reflected in a fair amount of legal regulations governin
Los estilos APA, Harvard, Vancouver, ISO, etc.
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía