Literatura académica sobre el tema "BWI [Blade Wake Interaction]"

Analytically predicted results of blade-vortex interaction (BVI) airloads, using the second- generation comprehensive helicopter analysis system (2GCHAS), are presented with the experimental results obtained from the higher-harmonic-control aeroacoustic rotor test (HART) program using a 40-percent, Mach-scaled model of the hingeless BO-105 main rotor. Correlations include airloads, blade tip deflections, and tip vortex geometry. The effects on blade airload predictions are studied with higher-harmonic pitch controls (HHC). It was concluded that the blade torsional deflection and the wake system play a very important role in predicting BVI airloads.

An electrically controlled rotor (ECR), also called a swashplateless rotor, replaces a swashplate with a trailing-edge flap system to implement primary rotor control. To investigate the aerodynamic characteristics of an ECR in blade-vortex interaction (BVI) condition, an analysis model based on the viscous vortex particle method, ECR blade pitch equation, and the Weissinger-L lifting surface model is established. In this model, the ECR wake flow field vorticity is discretized as multiple vortex particles, and the vorticity-velocity form of the Navier-Stokes equation is solved to simulate the transport diffusion of the vorticity. The flap motion-inducing blade-pitch movement is obtained by solving the ECR blade-pitch movement equation via the Runge–Kutta fourth-order method. On the basis, BVI noise radiation of an ECR is evaluated using the Ffowcs Williams and Hawkings (FW-H) equation. Based on the present prediction model, the aerodynamic and acoustic characteristics of a sample ECR in BVI condition are analyzed. The results show that since the BVI event of the ECR on the advancing side is mainly caused by the interaction between the flap tip vortex and the blade, the blade spanwise range of ECR BVI occurrence on the advancing side is smaller than that of the conventional rotor. In addition, the magnitude of the maximum sound pressure level on the advancing side as well as on the retreating side of the ECR is also different from that of the conventional rotor, which is consistent with the difference in the airloads between the ECR and conventional rotor. Furthermore, a study was performed to examine the effect of the pre-index angle on the BVI-induced airloads and noise. The amplitude of the impulsive airloads of the ECR on the advancing side is increased with the increase in pre-index angle, while the amplitude of the impulsive airloads of the ECR on the retreating side is decreased. Indeed, when the pre-index angle of the sample ECR is 8 degrees, the retreating-side noise radiation lobe is almost disappeared. In addition, the different intensity of wake vorticity is the main reason for the differences of the BVI-induced airloads and noise among the ECR with different pre-index angles.

AbstractThis paper studies the rotor aeromechanics in descending flight using a nonlinear flexible multibody dynamic analysis code, DYMORE. A freewake model is included in DYMORE to improve the rotor wake modelling. The wind-tunnel test data of the Higher-harmonic Aeroacoustics Rotor Test (HART) II rotor, with and without higher harmonic pitch control (HHC), and the flight test data of the full-scale utility helicopter rotor in descent are used for the aeromechanics correlation at an advance ratio of 0·15. The blade-vortex interaction (BVI) airloads are reasonably predicted for both the HART II and utility helicopter rotors, although some BVI peaks are missed on the advancing sides for both the rotors. The flap deflections and elastic torsion deformations at the blade tip are fairly correlated against the measured data of the HART II rotor. The correlation of blade structural moments for both HART II and utility helicopter rotors are not as good as the lift predictions; however, a reasonable prediction is obtained for the utility helicopter rotor.

Purpose This paper aims to compare the comprehensive rotorcraft analyses using the two different blade section property data sets for the blade natural frequencies, airloads, elastic deformations, the trimmed rotor pitch control angles and the blade structural loads of a small-scale model rotor in a blade vortex interaction (BVI) phenomenon. Design/methodology/approach The two different blade section property data sets for the first Higher-harmonic control Aeroacoustic Rotor Test (HART-I) are considered for the present rotor aeromechanics analyses. One is the blade property data set using the predicted values which is one of the estimated data sets used for the previous validation works. The other data set uses the measured values for an uninstrumented blade. A comprehensive rotorcraft analysis code, CAMRAD II (comprehensive analytical model of rotorcraft aerodynamics and dynamics II), is used to predict the rotor aeromechanics such as the blade natural frequencies, airloads, elastic deformations, the trimmed rotor pitch control angles and the blade structural loads for the three test cases with and without higher-harmonic control pitch inputs. In CAMRAD II modelling with the two different blade property data sets, the blade is represented as a geometrically nonlinear elastic beam, and the multiple-trailer wake with consolidation model is used to consider more elaborately the BVI effect in low-speed descending flight. The aeromechanics analysis result sets using the two different blade section property data sets are compared with each other as well as are correlated with the wind-tunnel test data. Findings The predicted blade natural frequencies using the two different blade section property data sets at non-rotating condition are quite similar to each other except for the natural frequency in the fourth flap mode. However, the natural frequencies using the predicted blade properties at nominal rotating condition are lower than those with the measured blade properties except for the second lead-lag frequency. The trimmed collective pitch control angle with the predicted blade properties is higher than both the wind-tunnel test data and the result using the measured blade properties in all the three test cases. The two different blade property data sets both give reasonable predictions on the blade section normal forces with BVI in the three test cases, and the two analysis results are reasonably similar to each other. The blade elastic deformations at the tip using the measured blade properties are correlated more closely with the wind-tunnel test data than those using the predicted blade properties in most correlation examples. In addition, the predictions of blade structural loads can be slightly or moderately improved by using the measured blade properties particularly for the oscillatory flap bending moments. Finally, the movement of the sectional centre of gravity location of the uninstrumented blade has a moderate influence on the blade elastic twist at the tip in the baseline case and the oscillatory flap bending moment in the minimum noise case. Practical implications The present comparison study on rotor aeromechanics analyses using the two different blade property data sets will show the influence of blade section properties on rotor aeromechanics analysis. Originality/value This paper is the first attempt to compare the aeromechanics analysis results using the two different blade section property data sets for all three test cases (baseline, minimum noise and minimum vibration) of HART-I in low-speed descending flight.

This paper deals with the computational analysis of acoustic fields generated by helicopter rotors when Blade-Vortex Interactions (BVI) occur. The prediction procedure starts from the determination of the steady periodic blade deformations. Then, the BVI-affected, unsteady aerodynamics solution is obtained by a potential-flow boundary integral formulation suited for aeronautical configurations experiencing blade-wake impingements. It is applicable to blades with arbitrary shape and motion and evaluates both wake distortion and blade pressure field. Finally, the noise field radiated by the rotor is computed through an aeroacoustic tool based on the Ffowcs Williams and Hawkings equation. The numerical investigation examines the sensitivity of BVI noise prediction on the aeroelastic model applied for the calculation of blade deformations, and assesses the accuracy of the results through correlation with experimental data concerning a helicopter main rotor in descent flight. Noise predicted is examined in terms of both acoustic pressure signatures and noise radiation characteristics.

Abstract The article discusses the phenomenon of stator Wake/Rotor cascade (W/R) interaction in a steam turbine stage, and the ability to capture it in turbine stage design calculations making use of standard numerical codes. Firstly, the W/R interaction is analysed by comparing its real, experimentally recorded course with the numerical results obtained using vortex theory models and methods. This part of the analysis ends with formulating a conclusion about stochastic nature of the W/R interaction and indicating its reason, which is the vortex structure of the stator wake. Next, a question is discussed whether and how this stochastic nature of the examined phenomenon can be taken into account in calculations of Reynolds Averaged Navier-Stokes (RANS) equations. Differences are indicated between the uniform pattern of the stator wake obtained using a RANS code and the vortex structure of the real wake. It is concluded, however, that despite these differences the RANS results correctly reflect the time-averaged course of the real W/R interaction, and the process of averaging the flow parameters on the sliding plane between stator and rotor calculation areas can be treated as sort of “numerical averaging” of different realisations of the W/R interaction.

The interaction between the rotor and the tower wake is an important source of noise for wind turbines with downwind rotors. The tower wake modifies the dynamic pressure and the local flow incidence angle as seen by the blades and, hence, modifies the aerodynamic loading of the blade during blade passage. The resulting n per revolution fluctuation in the blade loading (where n is the number of blades) is the source of low frequency but potentially high amplitude sound levels. The Wind Turbine Company (WTC) Proof of Concept 250 kW (POC) wind turbine has been observed by field personnel to produce low-frequency emissions at the National Wind Technology Center (NWTC) site during specific atmospheric conditions. Consequently, WTC is conducting a three-phase program to characterize the low frequency emissions of its two-bladed wind turbines and to develop noise mitigation techniques if needed. This paper summarizes the first phase of this program including recent low-frequency noise measurements conducted on the WTC POC250 kW wind turbine, a review of the wake characteristics of circular towers as they pertain to the blade-wake interaction problem, and techniques to attenuate the sound pressure levels caused by the blade-wake interaction.

The objective of this work was to enhance the understanding of unsteady flow phenomena in multistage low-pressure turbines. For this purpose, hot-film probe measurements were made downstream of every rotor blade row of a five-stage low-pressure turbine. Rotor–rotor interaction and stator–rotor interaction were observed to have a profound influence on the flow through the low-pressure turbine. Interaction of rotors of different turbine stages occurred owing to the influence of the wakes shed by one rotor blade row upon the flow through the next downstream rotor blade row. This wake-induced rotor–rotor interaction resulted in strongly amplitude-modulated periodic and turbulent velocity fluctuations downstream of every rotor blade row with the exception of the most upstream one. Significantly different wake depths and turbulence levels measured downstream of every rotor blade row at different circumferential positions evidenced the effect of the circumferentially nonuniform stator exit flow upon the next downstream rotor blade row. Stator-rotor interaction also strongly influenced the overturning and the under-turning of the rotor wakes, caused by the rotor secondary flows, in the rotor endwall regions. Low rotor wake overturning and underturning, i.e., reduced rotor secondary flow influence, were observed to correlate well with low rotor wake turbulence levels.

Le développement du trafic aérien autour des agglomérations est limité notamment par les nuisances sonores qu'il engendre. Il est donc indispensable de parvenir à comprendre l'origine de ces phénomènes afin d'en réduire les effets. Les hélicoptères, qui sont amenés à survoler les agglomérations à basse altitude, font ainsi l'objet de nombreuses études. Le but principal de notre étude est de développer des méthodes numériques permettant d'évaluer le rôle des instabilités elliptiques de tourbillons dans la production du BWI. La première partie de cette thèse s'intéresse aux caractéristiques du bruit produit par l'interaction d'une pale avec un tourbillon instable. Pour ce faire, une simulation des instabilités elliptiques se développant dans une paire de tourbillons analytiques corotatifs parallèles rectilignes uniformes est d'abord réalisée. Ensuite, un outil numérique, basé sur la théorie d'Amiet, est développé pour obtenir les perturbations de pression sur pales issus d'une interaction entre une pale et le tourbillon instable. Un bon accord est trouvé entre ces résultats et les données expérimentales. Dans une deuxième partie nous nous intéressons à l'influence des caractéristiques géométriques du tourbillon d'extrémité de pale jeune isolé (coeur du tourbillon elliptique, trajectoire courbe) sur le développement des instabilités elliptiques. Pour cela le profil d'un tourbillon d'extrémité de pale a été calculé au moyen du code volumes finis. Une étude linéaire a ensuite été menée en considérant cette solution comme champ porteur, au moyen d'une méthode Euler linéarisée harmonique développée et validée au cours de cette thèse.

Growing concerns about the environmental impact of fossil fuel energy and improvements in both the cost and performance of wind turbine technologies has spurred a sharp expansion in wind energy generation. However, both the increasing size of wind farms and the increased contribution of wind energy to the overall electricity generation market has created new challenges. As wind farms grow in size and power density, the aerodynamic wake interactions that occur between neighboring turbines become increasingly important in characterizing the unsteady turbine loads and power output of the farm. Turbine wake interactions also impact variability of farm power generation, acting either to increase variability or decrease variability depending on the wind farm control algorithm. In this dissertation, both the unsteady vortex wake loading and the effect of wake interaction on farm power variability are investigated in order to better understand the fundamental physics that govern these processes and to better control wind farm operations to mitigate negative effects of wake interaction. The first part of the dissertation examines the effect of wake interactions between neighboring turbines on the variability in power output of a wind farm, demonstrating that turbine wake interactions can have a beneficial effect on reducing wind farm variability if the farm is properly controlled. In order to balance multiple objectives, such as maximizing farm power generation while reducing power variability, a model predictive control (MPC) technique with a novel farm power variability minimization objective function is utilized. The controller operation is influenced by a number of different time scales, including the MPC time horizon, the delay time between turbines, and the fluctuation time scales inherent in the incident wind. In the current research, a non-linear MPC technique is developed and used to investigate the effect of three time scales on wind farm operation and on variability in farm power output. The goal of the proposed controller is to explore the behavior of an "ideal" farm-level MPC controller with different wind, delay and horizon time scales and to examine the reduction of system power variability that is possible in such a controller by effective use of wake interactions. The second part of the dissertation addresses the unsteady vortex loading on a downstream turbine caused by the interaction of the turbine blades with coherent vortex structures found within the upstream turbine wake. Periodic, stochastic, and transient loads all have an impact on the lifetime of the wind turbine blades and drivetrain. Vortex cutting (or vortex chopping) is a type of stochastic load that is commonly observed when a propeller or blade passes through a vortex structure and the blade width is of the same order of magnitude as the vortex core diameter. A series of Navier-Stokes simulations of vortex cutting with and without axial flow are presented. The goal of this research is to better understand the challenging physics of vortex cutting by the blade rotor, as well as to develop a simple, physics-based, validated expression to characterize the unsteady force induced by vortex

Detailed surface pressure measurements have been made on a NACA 0015 immersed in two grid generated homogenous flows at Re = 1.17 x 10^6 for a = 0°, 4°, 8°, 12°, 16°, and 20°. The goal of this measurement was to reveal and highlight mean loading and turbulence scale effects on surface pressure fluctuations resulting from turbulence/airfoil interaction. Also, measurements are compared with the theory of Amiet (1976a,b). The surface pressure response shows a dependance on angle of attack, the nature of which is related to the relative chord/turbulence scale. The dependance on turbulence scale appears to be non-monotonic at low reduced frequencies, wr = Pi*f*c/U with both an increase and decrease in unsteady pressure magnitude occuring with increasing mean load. A reduced frequency overlap region exists at wr > 10 where the two different scale flows begin to produce similar effects on the surface pressure with increasing angle of attack manifesting as a rise in unsteady surface pressure magnitude. Also, the interaction of the full 3-dimensional wavenumber spectrum affects the distance over which pressure fluctuations correlate and the extent of correlation is affected by angle of attack as demonstrated in the chordwise and spanwise pressure correlation. Amietâ s theory is shown to agree favorably with measurements in the leading edge region although demonstrates insufficiencies in predicting unsteady pressure phasing.
Master of Science

Simultaneous two-point three-component four-sensor hot-wire velocity measurements taken in three flows of aeroacoustic interest are here analyzed. The analyses provide information on the turbulence structure of the flows as it would be encountered by hypothetical noise producing blades passing through the flows. Two-point measurements taken in the first flow, a lifting wake from a rectangular NACA 0012 half wing, are used to calculate space-time correlation functions and 'pointwise' wave number frequency spectra. Two upwash spectra, calculated for locations in the region of the wake that is roughly homogenous in the spanwise direction, are direct estimates of the full wave number frequency spectra at their locations. As such, they are used to perform aeroacoustic calculations, and the results are compared to results achieved using the von Kármán isotropic spectrum. Amiet's approximation, where the wave number frequency spectra can be represented by the correlation length scales is found to hold reasonably well for the measured spectra.

The two-point measurements in the second flow, a vortex/blade-tip interaction, are analyzed to provide information useful to researchers of blade-wake interaction noise produced by helicopter rotors. Space-time correlation functions and wave number frequency spectra are calculated for five cuts through the region of interaction. The correlation functions provide information concerning the turbulence length scales found in the interaction region. The spectra are compared to the von Kármán isotropic spectrum and found to be greatly different. However, the spectra do bear some resemblance to spectra calculated in the spanwise homogenous region of the lifting wake.

The two-point measurements taken in the third flow, the wake from a fan cascade, are analyzed to provide information of use to modelers of broadband noise produced through rotor wake/stator interactions. In particular, space-time correlation functions are calculated for a grid of two-point measurements, which allows the estimation of the turbulence structure as seen by a passing stator blade. Space-time correlation functions and wave number frequency spectra are calculated for various stator configurations. The implications of engine operating speed and stator configuration for broadband noise production are discussed.

[Vita removed March 2, 2012. GMc]
Master of Science

The unsteady behavior of a tip leakage flow downstream of a simulated axial compressor rotor has been studied. The Virginia Tech low speed linear cascade wind tunnel was adapted to model the unsteady tip leakage flow produced by a rotor operating in the vortical wakes of a set of stator vanes. The cascade, consisting of 8 GE rotor B blades, has adjustable tip gap, inlet angle of 65.1 degrees, turning angle of 11.8 degrees and solidity of 1.076. The cascade Reynolds number, based on blade chord, was 393,000. A moving end wall was used to simulate the relative motion between rotor and casing, and vortex generators attached to the moving end wall were used to produce an idealized periodic unsteady vortical inflow similar to that shed by the junction of a row of inlet guide vanes. Measurements of the vortical inflow to the cascade produced by the generators and of the mean blade loading at the mid span are presented. The periodic and aperiodic behavior of the tip leakage flow downstream of the cascade, produced by this vortical disturbance, is also presented using phase and time averaged 3-component turbulence and pressure fluctuation measurements. These measurements are made for tip gap from 0.83% to 3.3% chord and streamwise locations from 0.772% to 1.117% blade spacing axially downstream of the cascade. The phase averaged inflow measurements reveal that the inflow produced by the vortex generators consists of a pair asymmetric counter-rotating vortices embedded in a thin (4.6% chord) endwall boundary layer. The vortices extend some 7.4% chord from the end wall. Their strength is about two orders smaller than the typical circulation of the tip leakage vortices produced by the cascade. Phase averaged single point three component hot-wire measurements downstream of the cascade reveal that the vortical inflow is, however, capable of producing significant large scale fluctuations in the size, strength, structure and position of the tip leakage vortex. These effects increase in magnitude with increase of tip gap. For small tip gaps these effects appear to be due to simple superposition between the inflow vortices and the tip leakage vortex. However for larger tip gaps these effects appear primarily a consequence of the inflow vortices interfering with the shedding of circulation from the blade tip. The fact that the circulation fluctuation is consistent with the inviscid unsteady loading prediction suggests that the inviscid response may be a major mechanism for generating the tip leakage unsteadiness. Although there is large periodic fluctuation in the tip leakage flow disturbed by the inflow, there is a larger aperiodic component. Two point correlation measurements and linear stochastic estimation are used to reveal the structure of this aperiodic part for a tip gap of 3.3% chord. The aperiodic fluctuation, containing most of the turbulence energy, is found appearing to be organized structures in large scale, and making the estimated instantaneous velocity field significantly different from the phase averaged periodic velocity field. Phase averaged pressure fluctuation measurements made using a microphone in the tip leakage vortex downstream of the cascade reveal that there are significant periodic fluctuating pressure waves and intense mean square fluctuation of the aperiodic fluctuating pressure. They are consistent with the measured periodic flow and aperiodic flow field respectively. These microphone measurements are validated using fluctuating pressure gradient estimates determined from the hot-wire measurements.
Ph. D.

The effects of serrated trailing edge designs, designed for noise reduction, on the flow-field downstream of an idealized aircraft engine fan blade row were investigated in detail. The measurements were performed in the Virginia Tech low speed linear cascade tunnel on one set of baseline GE-Rotor-B blades and four sets of GE-Rotor-B blades with serrated trailing edges. The four serrated blade sets consisted of two different serration sizes (1.27 cm and 2.54 cm) and for each different serration size a second set of blades with added trailing edge camber. The cascade row consisted of 8 GE-Rotor-B blades and 7-passages with adjustable tip gap settings. It had an inlet angle of 65.1º, stagger angle of 56.9º and a turning angle of 11.8º. The tunnel was operated with a tip gap setting of 1.65% chord, with a Reynolds number based on the chord of 390,000. Blade loading measurements performed on each set of blades showed that it was slightly dependent on the serration shape. As the serration size was increased the blade loading decreased, but adding droop increased the blade loading. The Pitot-static cross-sections showed that flow-fields near the upper and lower endwalls cascade tunnel were similar with the baseline or the serrated blade downstream of the blade row. In the wake region, the individual trailing edge serrations tips and valleys could be seen. As the wake convected downstream, the individual tips and valleys became less visible and the wake was more uniform in profile. The tip leakage vortex was only minimally affected by the trailing edge serrations. This conclusion was further reinforced by the three-component hot-wire cross-sectional measurements that were performed from the lower endwall to the mid-span of the blade. These showed that the mean streamwise velocity, turbulence kinetic energy and turbulence kinetic energy production in the tip leakage region were nearly the same for all four serrated blades as well as the baseline. The vorticity in this region was a more dependent on the serration shape and as a result increased with serration size compared to the baseline. Mid-span measurements performed with the three-component hot-wire showed the spreading rate of the wake and the decay rate of the wake centerline velocity deficit increased with serration size compared to the baseline case. Drooping of the trailing edge only minimally improved the spreading and decay rates. This improvement in these rates was predicted to reduce the tonal noise at the leading edge of the downstream stator vane because the periodic fluctuation associated with the sweeping of the rotor blade wakes across it, was due to the pitchwise variation in the mean streamwise velocity. The wakes were further compared to the mean velocity and turbulence profiles of plane wakes, which the baseline and the smallest serration size agreed the best. As the serration size was increased and drooping was added, the wakes became less like plane wakes. Spectral plots at the wake centerline in all three velocity directions showed some evidence of coherent motion in the wake as a result of vortex shedding.
Master of Science

The growth that aviation has seen in the last decades has drawn the attention on the environmental impact of aircraft. An important part of this environmental impact is the noise emitted by air vehicles, which is considered rather significant for community annoyance. The generation and propagation of air vehicle noise are two different areas of interest, which require accurate prediction in order to control the emitted noise levels. The present thesis employs numerical methods in order to investigate various air vehicle noise propagation effects. It is divided in two parts: the far field and the near field study. Each of these studies is concentrated on the sound propagation mechanisms that are dominant for each case and uses a numerical method that is best suited for it in terms of mechanisms incorporated and cost effectiveness. The far-field study of this thesis focuses on the nonlinear propagation of helicopter rotor noise using the Burgers equation, a well known one direction propagation method. The Burgers equation incorporates geometrical spreading, atmospheric absorption and nonlinear distortion effects. Towards this study, the HELISHAPE descent case experimental database is used. Blade Vortex Interaction (BVI) noise, the dominant noise contributor during descent, is mainly examined. It is shown that advancing side BVI noise is affected by nonlinear distortion, while retreating side BVI noise is not. For some frequency bands the difference between linear and nonlinear calculations can be as high as 7 dB. Based on signal characteristics at source, two quantities are derived. The first quantity (termed polarity) is based on the pressure gradient of the source signal and can be used to determine whether a BVI signal will evolve as an advancing or a retreating side signal. The second quantity (termed weighted rise time) is a measure of the impulsiveness of the BVI signal and can be used to determine at which frequency nonlinear effects start to appear. Finally, polarity and weighted rise time are shown to be applicable in cases of BVI noise generated from different blade tips, as well as, in cases of non-BVI noise. However, employment of the Burgers equation can be time consuming to be included in routine calculations. It also requires knowledge of the initial pressure time signal. The power spectrum alone, which is usually known, is not sufficient. In order to overcome these difficulties, three prediction methods are presented that are based on the Burgers equation. These are: i) a numerically generated database, ii) correlation equations and iii) the phase assignment method. Near field propagation of air vehicle noise requires different treatment than far field. The effects which are mainly affecting the propagation are geometrical spreading, convection and refraction effects due to the flow field, as well as reflections and diffraction on the air vehicle surfaces. Towards these objectives, a new low-order flow/acoustics interaction method for the prediction of sound propagation and diffraction in unsteady compressible flow using adaptive 3-D hybrid grids is investigated. The total field is decomposed into the flow field described by the Euler equations, and the acoustics field described by the Nonlinear Perturbation equations. The method is shown capable of predicting monopole sound propagation, while employment of acoustics-guided adapted grid refinement improves the accuracy of capturing the acoustic field. Interaction of sound with solid boundaries is also examined in terms of reflection and diffraction. Sound propagation through an unsteady flow field is examined using static and dynamic flow/acoustics coupling demonstrating the importance of the latter. Proof of concept for the new method is provided by its application to the case of a conventional jet transport airplane, examining the effect of flow field and wing shielding on the near field noise levels. During the aforementioned noise investigation and analysis, results on Blade Wake Interaction (BWI) noise were also reached. Presently, the mechanism of BWI noise generation, as well as the corresponding prediction model, are still under consideration. Helicopter rotor BWI noise is known to be significant during take-off and level flight, while less attention has been given to descent flight conditions, where BVI noise is dominant. Through signal analysis of the HELISHAPE descent case acoustic database, the rotor azimuthal region responsible for BWI noise is localized and the dominance of BVI noise in the BWI frequency region is shown. Coherence analysis of the blade pressure data indicate significant chordwise coherence in the 3 to 4 Struhal number range and absence of acoustic dipoles in the BWI frequency range. The findings of this study support BWI prediction models based on Amiet’s theory and suggest that BWI noise can be ignored for predictions of rotor noise in descent flight conditions.
Η ανάπτυξη που συναντάται στην αεροπλοΐα τις τελευταίες δεκαετίες έχει τραβήξει την προσοχή στην περιβαλλοντολογική επίδραση των αεροσκαφών. Ένα σημαντικό μέρος αυτής της επίδρασης είναι ο θόρυβος των αεροχημάτων ο οποίος ευθύνεται κατά ένα μεγάλος μέρος για την ενόχληση του πληθυσμού στις περιοχές των αεροδρομίων και όχι μόνο. Η δημιουργία και η διάδοση του θορύβου αεροχημάτων είναι δύο διαφορετικές περιοχές ενδιαφέροντος, οι οποίες απαιτούν ακριβή πρόβλεψη στην προσπάθεια ελέγχου των εκπεμπόμενων ηχητικών επιπέδων. Η παρούσα διατριβή χρησιμοποιεί αριθμητικές μεθόδους για τη μελέτη της διάδοσης του θορύβου αεροχημάτων. Χωρίζεται δε σε δύο μέρη: τη μελέτη του μακρινού και του κοντινού πεδίου. Καθεμία από αυτές τις μελέτες επικεντρώνεται στους μηχανισμούς ηχητικής διάδοσης που είναι κυρίαρχοι σε κάθε περίπτωση και χρησιμοποιεί μια αριθμητική μέθοδο που ταιριάζει καλύτερα όσο αναφορά την απόδοσή της και τους μηχανισμούς που εξετάζονται. Η μελέτη μακρινού πεδίου εστιάζεται στη μη-γραμμική διάδοση θορύβου ρότορα ελικοπτέρου με τη χρήση της εξίσωσης Burgers, μιας γνωστής μεθόδου υπολογιστικής διάδοσης ήχου σε μία διεύθυνση. Η εξίσωση Burgers περικλείει τα φαινόμενα της γεωμετρικής εξασθένισης, ατμοσφαιρικής απορρόφησης και μι-γραμμικής στρέβλωσης. Σε αυτή τη μελέτη χρησιμοποιήθηκαν τα δεδομένα του πειράματος HELISHAPE. Ο θόρυβος από αλληλεπίδραση πτερυγίου-στροβίλου (BVI noise), ο οποίος είναι ο κυρίαρχος αεροδυναμικός θόρυβος στην περίπτωση της καθοδικής πτήσης, είναι αυτός που εξετάστηκε κυρίως. Αποδείχθηκε ότι ο θόρυβος BVI στην πλευρά του προχωρούντος πτερυγίου (advancing side) επηρεάζεται σημαντικά από τα μη-γραμμικά φαινόμενα σε αντίθεση με την πλευρά του υποχωρούντος πτερυγίου (retreating side). Μερικές μπάντες συχνοτήτων έδειξαν διαφορές μεταξύ γραμμικής και μη-γραμμικής διάδοσης έως και 7dB. Βασιζόμενοι στα χαρακτηριστικά των σημάτων, δύο νέα μεγέθη ορίστηκαν. Το πρώτο από αυτά, με το όνομα πολικότητα (polarity) βασίζεται στην παράγωγο της ακουστικής πίεσης του αρχικού σήματος και μπορεί να προσδιορίσει αν το σήμα θα διαδοθεί σαν προχωρούν ή υποχωρούν. Το δεύτερο μέγεθος, με το όνομα ζυγισμένος χρόνος ανόδου (weighted rise time) είναι μια εκτίμηση της παλμικότητας του σήματος BVI και μπορεί να χρησιμοποιηθεί για να προσδιορίσει την περιοχή συχνοτήτων όπου τα μη-γραμμικά φαινόμενα θα ξεκινήσουν να εμφανίζονται. Αυτά τα μεγέθη αποδείχθηκε ότι μπορούν να χρησιμοποιηθούν και σε περιπτώσεις θορύβου BVI άλλων πτερύγων, καθώς και σε μη-BVI σήματα. Ωστόσο, η χρήση της εξίσωσης Burgers μπορεί να είναι χρονοβόρα αν συμπεριληφθεί σε υπολογισμούς ρουτίνας. Ακόμη προϋποθέτει γνώση του αρχικού σήματος ακουστικής πίεσης. Το ηχητικό φάσμα από μόνο του, που συνήθως είναι γνωστό, δεν είναι αρκετό. Για να ξεπεραστούν αυτές οι δυσκολίες, παρουσιάζονται τρεις μέθοδοι πρόβλεψης οι οποίες βασίζονται στην εξίσωση Burgers. Αυτές είναι: i) μια υπολογιστικά δημιουργημένη βάση δεδομένων ii) εξισώσεις συσχετίσεων και iii) η μέθοδος της ανάθεσης φάσης. Η μελέτη διάδοσης θορύβου στο κοντινό πεδίο απαιτεί διαφορετική μεταχείριση από το μακρινό πεδίο. Τα φαινόμενα που την επηρεάζουν περισσότερο είναι αυτά της γεωμετρικής εξασθένισης, μεταφοράς και περίθλασης λόγω του ροϊκού πεδίου, καθώς και ανάκλαση και διάθλαση στις επιφάνειες του αεροχήματος. Για το λόγο αυτό μελετάται μια νέα μέθοδος χαμηλής τάξης ακρίβειας, αλληλεπίδρασης ροϊκού-ακουστικού πεδίου για την διάδοση και διάθλαση ήχου σε ασταθή συμπιεστή ροή με τη χρήση 3D υβριδικού πλέγματος. Το ολικό πεδίο διαχωρίζεται στο ροϊκό πεδίο περιγραφόμενο από τις εξισώσεις Euler και το ακουστικό πεδίο από τις μη-γραμμικές εξισώσεις διαταραχών. Η μέθοδος αποδεικνύεται ικανή να προβλέψει την ηχητική διάδοση μονοπόλου, ενώ η χρήση προσαρμοσμένου πλέγματος βελτιώνει την ακρίβεια του ηχητικού πεδίου. Η αλληλεπίδραση ήχου και στερεών επιφανειών εξετάζεται επίσης σχετικά με τα φαινόμενα ανάκλασης και διάθλασης. Εξετάζεται ακόμα η διάδοση ήχου σε ασταθές ροϊκό πεδίο χρησιμοποιώντας στατική και δυναμική σύζευξη και αποδεικνύεται η σημαντικότητα της δεύτερης. Απόδειξη χρηστικότητας της νέα μεθόδου επιδεικνύεται με την εφαρμογή για την περίπτωση συμβατικού επιβατηγού αεροσκάφους, όπου εξετάζονται τα φαινόμενα της επίδρασης της ροής και της ηχητικής κάλυψης της πτέρυγας στα ηχητικά επίπεδα του κοντινού πεδίου. Κατά τη διάρκεια των παραπάνω ακουστικών διερευνήσεων, επιτεύχθηκαν ακόμα κάποια αποτελέσματα πάνω στον θόρυβο λόγω αλληλεπίδρασης πτερυγίου-απορεύματος (BWI noise). Μέχρι τώρα ο ακριβής μηχανισμός του θορύβου BWI, όπως και το αντίστοιχο μοντέλο πρόβλεψης, αποτελεί θέμα μελετών. Ο θόρυβος BWI στα ελικόπτερα είναι γνωστό ότι είναι σημαντικός στις περιπτώσεις ανοδικής και επίπεδης πτήσης, ενώ μικρή βαρύτητα έχει δοθεί στην περίπτωση της καθοδικής πτήσης λόγω της κυριαρχίας του BVI θορύβου. Μέσω ανάλυσης σημάτων του HELISHAPE για τη περίπτωση της καθοδικής πτήσης, εντοπίστηκε η περιοχή του δίσκου του ρότορα υπεύθυνη για τον θόρυβο BWI και δείχθηκε η επίδραση του θορύβου BVI στην περιοχή συχνοτήτων BWI. Ανάλυση συνοχής (coherence analysis) των αεροδυναμικών πιέσεων των πτερυγίων έδειξε σημαντικές τιμές στη περιοχή τιμών 3 με 4 αριθμών Struhal και απουσία ακουστικών διπόλων στην περιοχή συχνοτήτων του BWI. Τα ευρήματα της παρούσας μελέτης υποστηρίζουν το μοντέλο πρόβλεψης θορύβου BWI που βασίζεται στη θεωρία του Amiet και προτείνουν ότι ο θόρυβος BWI μπορεί να αγνοηθεί στις προβλέψεις θορύβου ρότορα σε συνθήκες καθοδικής πτήσης.

In many engineering applications, obstacles often appear in the wake of obstacles. Vortices shed from an upstream obstacle interact with downstream obstacle and generate noise, for example blades in a turbomachinery, tubes in a heat exchanger, rotating blades like a helicopter and wind turbine and so on. This phenomenon is called wake-body interaction or body-vortex interaction (BVI). The rod-airfoil and airfoil-airfoil configurations are typical models for the wake-body interaction. A rod and an airfoil are immersed upstream of the airfoil. In this chapter, we review the noise mechanism generated by the wake-body interaction and show the numerical results obtained by the coupling method using commercial CFD and acoustic BEM codes. The results show that depending on the spacing between the rod or airfoil and the airfoil, the flow patterns and noise radiation vary. With small spacing, the vortex shedding from the upstream obstacle is suppressed and it results in the suppression of the sound generation. With large spacing, the shear layer or the vortices shed from the upstream obstacle impinge on the downstream obstacle and it results in the large sound generation. The dominant peak frequency of the generated sound varies with increase in the spacing between the two obstacles.

Experiments have been performed to investigate interactions between a loaded stator and transonic rotor. The Blade Row Interaction (BRI) rig is used to simulate an embedded transonic fan stage with realistic geometry (thin trailing edge) which produces a wake through diffusion. Details of the unsteady flow field between the stator and rotor were obtained using PIV. Flow-visualization images and PIV data that facilitate analysis of vortex shedding, wake motion, and wake-shock-interaction phenomena are presented. Stator wake and rotor-bow-shock interactions are analyzed for three stator/rotor axial spacings, and two stator loadings. Specific shed vortices and wake topological features are isolated for each configuration. The data analysis focuses on measuring the vortex size, strength, and location as it forms on the stator trailing edge and propagates downstream into the rotor passage. It was observed that vortex shedding is synchronized to the passing of a rotor bow shock. Results show that the circulation of a vortex increased by 19 to 23% from far to close spacing due to the increased strength of the rotor bow shock impacting the stator trailing edge. Reduction in stator loading decreased shed vortex circulation for the same stator/rotor axial spacing by 20 to 25%. Pitchwise radius of vortices also decreased by 13 to 19% from far to close spacing. Such changes in vortex size and strength should be accounted for to predict the effect of unsteady blade-row interactions on transonic compressor performance.

Interactions of vortical unsteady flows with structures are often encountered in several engineering applications. Such flow structure interactions (FSI) can be responsible for generating significant loads and can have many detrimental structural and acoustic side effects, such as structural fatigue, radiated noise and even catastrophic results. Amongst the different types of FSI, the parallel Blade-Vortex Interaction (BVI) is one of the most prominent. The authors in a previous work (Weiland and Vlachos, 2006) reported an active flow control technique that successfully minimizes the parallel BVI. This technique is based on disrupting the incident vortex using a jet issued via Leading Edge Blowing (LEB), hence, hereon we term the method LEB. The effectiveness of the method was experimentally analyzed using Time-Resolved Digital Particle Image Velocimetry (TRDPIV) recorded at a rate sufficient to fully resolve the spatio-temporal dynamics of the flow field combined with simultaneous accelerometer measurements of the structure. These measurements quantitatively document the FSI dynamics. While our results demonstrated that for the range of our experimental parameters the LEB is successful in dramatically modifying the BVI, the question still remains as to which physical processes are responsible for this reduction. This paper represents a continuation of our effort to further understand the dynamics of using active flow control to mitigate BVI. We present Proper Orthogonal Decomposition (POD) analysis of the temporally resolved planar flow fields for two extreme cases that were reported in the previous work. The two cases correspond to a large wake generator and a small wake generator. The POD technique was chosen specifically for its ability to reduce a complicated flow field into its optimal fundamental modes with a description of the energy contained in each mode, thereby simplifying the dynamics of a flow-field system for analysis. Results of the POD analysis for the small wake generator indicate that for no LEB, the fundamental (i.e. most energetic) mode is given by the vortex shedding of the circular cylinder upstream. The addition of LEB reduces the energy contained in this fundamental mode. Thus the LEB jet has the effect of reducing the flow field coherency; the structure of the exciting vortices is broken up into smaller vortices which have less or little effect on the transfer of energy from the wake to the airfoil. For the case of the large wake generator, the LEB jet has the opposite effect: the jet organizes the circular cylinder wake into flow structures that maintain their form, and thus the wake retains its ability to excite the airfoil into vibrations.

This paper investigates the effectiveness of leading-edge blowing (LEB) active flow control for modifying the vortex induced vibrations induced on an airfoil by the wake of a circular cylinder. The airfoil was allowed to oscillate perpendicular to the fluid flow direction in response to the impinging Von-Karman street. The flow field was simultaneously captured using Digital Particle Image Velocimetry (DPIV) and accelerometer measurements in a time-resolved sense. The results indicate that LEB can significantly reduce the degree of unsteady loading due to the blade vortex interaction (BVI). In some cases, the LEB jet appears to break the coherency of a vortex incident on the airfoil, and in other cases it appears to increase the mean standoff distance of the vortex as it convects over the airfoil surface.

The Blade-Row Interaction (BRI) rig at the Air Force Research Laboratory (AFRL), Compressor Aero Research Laboratory (CARL), has been simulated at three axial gaps between the highly loaded upstream stator row and the downstream transonic rotor using TURBO. Previous work with the Stage Matching Investigation (SMI) demonstrated a strong dependence of mass flow rate, efficiency, and pressure ratio on the axial spacing between an upstream wake generator and the downstream rotor through the variation of the axial gap. Several loss producing mechanisms were discovered and related to the spacings, referred to as close, mid, and far. In the SMI work, far spacing had the best performance. The BRI experiments were a continuation of the SMI work with the wake generator replaced by a swirler row to turn the flow and a deswirler row to create a wake by diffusion. Results of the BRI experiments showed a performance degradation between mid and far spacing which was not observed in SMI. This trend is seen in the numerical work as well, and the time-averaged data shows that the majority of this performance change occurred in the rotor. An unsteady separation bubble periodically forms and collapses as shocks reflect through the stator passage, creating additional aerodynamic blockage. The shed vortices induced by the unsteady loading and unloading of the stator trailing edge are chopped, with a frequency related to the spacing, by the rotor leading edge and ingested by the rotor. Once ingested the vortices interact in varying degrees with the rotor boundary layer. A treatment of the loss production in the BRI rig is given based on the time-accurate and time-averaged, high-fidelity TURBO results.

The interaction between the rotor and the tower wake is an important source of noise for wind turbines with downwind rotors. These noise levels may significantly impact the immediate environment. During rotation the rotor blades encounter periodic changes in flow conditions as a result of the tower presence. Typically turbine towers have a circular or modified circular cross section which significantly modifies the flow in the vicinity of the tower. Upstream, the tower causes the flow to decelerate and, hence, causes a rise in pressure. Because of its bluff shape, the flow separates prematurely from the tower and this tends to create a wide, unsteady, vortical wake. The wake characteristics are dependent on the cross-sectional shape of the tower, its surface properties, the Reynolds number (based on tower diameter and wind velocity) of the flow, and the turbulence level of the incoming flow. The wake modifies the dynamic pressure and the local flow incidence angle as seen by the blades and, hence, modifies the aerodynamic loading of the blade during blade passage. The resulting n per revolution fluctuation in the blade loading (where n is the number of blades) is the source of low frequency but potentially high amplitude sound levels. The WTC Proof of Concept 250 kW (POC) wind turbine has been observed by field personnel to produce low frequency emissions at the National Wind Technology Center (NWTC) site during specific atmospheric conditions. Consequently, WTC is conducting a three-phase program to characterize the low frequency emissions of its two-bladed wind turbines and to develop noise mitigation techniques if needed. This paper summarizes the first phase of this program including recent low-frequency noise measurements conducted on the WTC POC250 kW wind turbine, the wake characteristics of circular towers as they pertain to the blade-wake interaction problem, and techniques to attenuate the sound pressure levels caused by the blade-wake interaction.

This paper presents the results of time-resolved flow field measurements of a multistage shrouded axial turbine. The unsteady interaction mechanism between the rotor’s secondary flow vortices, the rotor’s wake and the adjacent blading at the exit plane of the first turbine stage is of prime interest and analysed in detail. Three key phases are identified for one blade passing event. The first phase shows a quasi undisturbed convection of the rotor’s secondary flow field into the downstream stator. The second phase shows a migration of high loss fluid from the wake layer into the passage and horse-shoe vortices at the rotor hub section. The relative motion between the rotor and stator blades brings the two vortices closer to the wake layer and lets the flow features interact with each other. The third phase focuses on the rotor indigenous hub vortices that are bent and stretched around the stator’s leading edge. The signal analysis of the time-resolved flow field indicates a high level of unsteadiness at the stator’s pressure side. The associated unsteadiness within the flow field is evaluated and quantified on the basis of pitchwise averaged space-time diagrams. The obtained results are finally discussed and explained using two flow schematics within and at the end of the paper.