Bibliografías temáticas / Electronic monitoring tool

Literatura académica sobre el tema "Electronic monitoring tool"

Autor: Grafiati

Publicado: 2 de julio de 2022

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Electronic monitoring tool".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Electronic monitoring tool":

Baby, R. E., M. Cabezas y E. N. Walsöe de Reca. "Electronic nose: a useful tool for monitoring environmental contamination". Sensors and Actuators B: Chemical 69, n.º 3 (octubre de 2000): 214–18. http://dx.doi.org/10.1016/s0925-4005(00)00491-3.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Klátik, Jaroslav y Martin Orviský. "Electronic and informatization of the judiciary as a tool for innovation". SHS Web of Conferences 92 (2021): 04013. http://dx.doi.org/10.1051/shsconf/20219204013.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Research background: The computerization and computerization of the judiciary are important support tools with great potential in addressing key issues in the judiciary. The basic architecture of the modernization and informatization of justice consists of the Electronic Judicial File, Development of Electronic Judicial Services, Electronic monitoring of offenders and the Register of Bankruptcies projects. In terms of scope and financial volume, the most intensive electronicization of Slovak courts in their modern history is currently underway. At present, an electronic person monitoring system is also being successfully implemented in Slovakia, which represents a fundamental modernization of prisons, but also an increase in the safety of citizens against perpetrators of violent crimes, domestic violence or crime at public mass events. Purpose of the article: The main goal of the paper is to analyze the problems in the electronic justice system with a focus on the issue of introducing electronic monitoring of offenders. The authors also analyzes whether a change in legislation that allowed the use of electronic monitoring in more serious crimes contributed to more frequent use of electronic monitoring, or this change did not bring the desired effect of greater use of electronic monitoring. Methods: The authors use the method of analysis, synthesis, system-structural method and normative-legal method of interpretation of legal norms. Findings & Value added: The main benefit of the research is to point out specific problems in connection with the electrification of the judiciary and the introduction of electronic monitoring and to propose solutions to these problems.

Carlsson, A., C. Krantz-Rülcker y F. Winquist. "An electronic tongue as a tool for wet-end monitoring". Nordic Pulp & Paper Research Journal 16, n.º 4 (1 de diciembre de 2001): 319–26. http://dx.doi.org/10.3183/npprj-2001-16-04-p319-326.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

DeMichele, Matthew. "Electronic Monitoring: It Is a Tool, Not a Silver Bullet". Criminology & Public Policy 13, n.º 3 (agosto de 2014): 393–400. http://dx.doi.org/10.1111/1745-9133.12089.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Babarada, Florin. "Electronic Tool Interferences with Electrophysiology for the Psychiatric Disorders Monitoring". American Journal of Bioscience and Bioengineering 3, n.º 3 (2015): 14. http://dx.doi.org/10.11648/j.bio.s.2015030301.13.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ikonnikova, Ksenia V., Natalia E. Vaisblat, Igor S. Peremitin y Raisa N. Abramova. "Electronic Database - Monitoring Tool and Quality Improvement of Supplied Electricity". MATEC Web of Conferences 19 (2014): 01039. http://dx.doi.org/10.1051/matecconf/20141901039.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Pfeifer, T. y P. Plapper. "Transputer-based tool monitoring system". Measurement 9, n.º 3 (julio de 1991): 134–39. http://dx.doi.org/10.1016/0263-2241(91)90034-n.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Beyens, Kristel. "Electronic monitoring and supervision: A comparative perspective". European Journal of Probation 9, n.º 1 (abril de 2017): 3–10. http://dx.doi.org/10.1177/2066220317704130.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

The use of electronic monitoring (EM) has grown rapidly in Europe and elsewhere and is likely to continue to do so. EM is a technological tool that allows to monitor the location of individuals via an electronic ankle tag, to track the movements of individuals either in real time or retrospectively. This special issue of the European Journal of Probation focuses on the relationship of EM with supervision in four jurisdictions (Belgium, Germany, The Netherlands and Scotland) and the question whether EM is mainly used as a stand-alone order or as an integrated measure; that is, alongside other supervisory conditions. It also contains a contribution with an initial round up of Australian experiences with EM.

Du, R. "Signal understanding and tool condition monitoring". Engineering Applications of Artificial Intelligence 12, n.º 5 (octubre de 1999): 585–97. http://dx.doi.org/10.1016/s0952-1976(99)00026-3.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Greenlaw, Paul S. y Cornelia Prundeanu. "The Impact of Federal Legislation to Limit Electronic Monitoring". Public Personnel Management 26, n.º 2 (junio de 1997): 227–44. http://dx.doi.org/10.1177/009102609702600205.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Organizations are increasingly using technology to electronically monitor employees' telephone calls, computer use and even their physical location. Electronic monitoring's popularity is largely driven by organizational security problems and the need to measure employee performance. However, there is growing concern, particularly among employee groups and some legislators, that guidelines are needed to ensure these technologies are used responsibly and do not infringe on employee rights. Additionally, the effectiveness of unlimited electronic monitoring as a management tool is being questioned. The Privacy for Consumers and Workers Act (PCWA) was drafted in response to these concerns, and has been vigorously debated in both the House and the Senate. This article will address key arguments raised both in support of and in opposition to this legislation. Although the PCWA did not become law, the complex issues raised by unrestricted electronic monitoring of employees are likely to remain on the public policy agenda.

Más fuentes

Tesis sobre el tema "Electronic monitoring tool":

Cowtan, Carla Jayne. "Electronic monitoring in the workplace, tools for social control". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ56313.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Rosunally, Yasmine Zaina. "Diagnostic and prognostic analysis tools for monitoring degradation in aged structures". Thesis, University of Greenwich, 2012. http://gala.gre.ac.uk/8785/.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

This research addresses the problem of prolonging the life of aged structures of historical value that have already outlived their original designed lives many times. While a lot of research has been carried out in the field of structural monitoring, diagnostics and prognostics for high tech industries, this is not the case for historical aged structures. Currently most maintenance projects for aged structures have focused on the instrumentation and diagnostic techniques required to detect any damage with a certain degree of success. This research project involved the development of diagnostic and prognostic tools to be used for monitoring and predicting the ‘health’ of aged structures. The diagnostic and prognostic tools have been developed for the monitoring of Cutty Sark iron structures as a first application. The concept of canary and parrot sensor devices are developed where canary devices are small, accelerated devices, which will fail according to similar failure mechanisms occurring in an aged structures and parrot devices are designed to fail at the same rate as the structure, thus mimicking the structure. The model-driven prognostic tool uses a Physics-of-Failure (PoF) model to predict remaining life of a structure. It uses a corrosion model based on the decrease in corrosion rate over time to predict remaining life of an aged iron structures. The data-driven diagnostic tool developed uses Mahalanobis Distance analysis to detect anomalies in the behaviour of a structure. Bayesian Network models are then used as a fusion method, integrating remaining life predictions from the model-driven prognostic tool with information of possible anomalies from data-driven diagnostic tool to provide a probability distribution of predicted remaining life. The diagnostics and prognostic tools are validated and tested through demonstration example and experimental tests. This research primarily looks at applying diagnostic and prognostic technologies used in high-tech industries to aged iron structures. In order to achieve this, the model-driven and data-driven techniques commonly used had to be adapted taking into consideration the particular constraints of monitoring and maintaining aged structures. The fusion technique developed is a novel approach for prognostics for aged structures and provides the flexibility often needed for diagnostic and prognostic tools.

Salós, Andrés Carlos Daniel. "Integrity monitoring applied to the reception of GNSS signals in urban environments". Thesis, Toulouse, INPT, 2012. http://www.theses.fr/2012INPT0047/document.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

L’intégrité des signaux GNSS est définie comme la mesure de la confiance qui peut être placée dans l’exactitude des informations fournies par le système de navigation. Bien que le concept d’intégrité GNSS a été initialement développé dans le cadre de l’aviation civile comme une des exigences standardisées par l’Organisation de l’Aviation Civile Internationale (OACI) pour l’utilisation du GNSS dans les systèmes de Communication, Navigation, et Surveillance / Contrôle du Trafic Aérien (CNS/ATM), un large éventail d’applications non aéronautiques ont également besoin de navigation par satellite fiable avec un niveau d’intégrité garanti. Beaucoup de ces applications se situent en environnement urbain. Le contrôle d’intégrité GNSS est un élément clé des applications de sécurité de la vie (SoL), telle que l’aviation, et des applications exigeant une fiabilité critique comme le télépéage basé sur l’utilisation du GNSS, pour lesquels des erreurs de positionnement peuvent avoir des conséquences juridiques ou économiques. Chacune de ces applications a ses propres exigences et contraintes, de sorte que la technique de contrôle d’intégrité la plus appropriée varie d’une application à l’autre. Cette thèse traite des systèmes de télépéage utilisant GNSS en environnement urbain. Les systèmes de navigation par satellite sont l’une des technologies que l’UE recommande pour le Service Européen de Télépéage Electronique (EETS). Ils sont déjà en cours d’adoption: des systèmes de télépéage pour le transport poids lourd utilisant GPS comme technologie principale sont opérationnels en Allemagne et en Slovaquie, et un système similaire est envisagé en France à partir de 2013. À l’heure actuelle, le contrôle d’intégrité GPS s’appuie sur des systèmes d´augmentation (GBAS, SBAS, ABAS) conçus pour répondre aux exigences de l’OACI pour les opérations aviation civile. C´est la raison pour laquelle cette thèse débute par une présentation du concept d’intégrité en aviation civile afin de comprendre les performances et contraintes des systèmes hérités. La thèse se poursuit par une analyse approfondie des systèmes de télépéage et de navigation GNSS en milieu urbain qui permets de dériver les techniques de contrôle d’intégrité GNSS les plus adaptées. Les algorithmes autonomes de type RAIM ont été choisis en raison de leur souplesse et leur capacité d´adaptabilité aux environnements urbains. Par la suite, le modèle de mesure de pseudodistances est élaboré. Ce modèle traduit les imprécisions des modèles de correction des erreurs d’horloge et d’ephemeride, des retards ionosphériques et troposphériques, ainsi que le bruit thermique récepteur et les erreurs dues aux multitrajets. Les exigences d’intégrité GNSS pour l’application télépéage sont ensuite dérivées à partir de la relation entre les erreurs de positionnement et leur effets dans la facturation finale. Deux algorithmes RAIM sont alors proposés pour l’application péage routier. Le premier est l’algorithme basé sur les résidus de la solution des moindres carrés pondérés (RAIM WLSR), largement utilisé dans l’aviation civile. Seulement, un des principaux défis de l’utilisation des algorithmes RAIM classiques en milieux urbains est un taux élevé d’indisponibilité causé par la mauvaise géométrie entre le récepteur et les satellites. C’est pour cela que un nouvel algorithme RAIM est proposé. Cet algorithme, basé sur le RAIM WLSR, est conçu de sorte à maximiser l’occurrence de fournir un positionnement intègre dans un contexte télépéage. Les performances des deux algorithmes RAIM proposés et des systèmes de télépéage associés sont analysés par simulation dans différents environnements ruraux et urbains. Dans tous les cas, la disponibilité du nouvel RAIM est supérieure à celle du RAIM WLSR
Global Navigation Satellite Systems (GNSS) integrity is defined as a measure of the trust that can be placed in the correctness of the information supplied by the navigation system. Although the concept of GNSS integrity has been originally developed in the civil aviation framework as part of the International Civil Aviation Organization (ICAO) requirements for using GNSS in the Communications, Navigation, and Surveillance / Air Traffic Management (CNS/ATM) system, a wide range of non-aviation applications need reliable GNSS navigation with integrity, many of them in urban environments. GNSS integrity monitoring is a key component in Safety of Life (SoL) applications such as aviation, and in the so-called liability critical applications like GNSS-based electronic toll collection, in which positioning errors may have negative legal or economic consequences. At present, GPS integrity monitoring relies on different augmentation systems (GBAS, SBAS, ABAS) that have been conceived to meet the ICAO requirements in civil aviation operations. For this reason, the use of integrity monitoring techniques and systems inherited from civil aviation in non-aviation applications needs to be analyzed, especially in urban environments, which are frequently more challenging than typical aviation environments. Each application has its own requirements and constraints, so the most suitable integrity monitoring technique varies from one application to another. This work focuses on Electronic Toll Collection (ETC) systems based on GNSS in urban environments. Satellite navigation is one of the technologies the directive 2004/52/EC recommends for the European Electronic Toll Service (EETS), and it is already being adopted: toll systems for freight transport that use GPS as primary technology are operational in Germany and Slovakia, and France envisages to establish a similar system from 2013. This dissertation begins presenting first the concept of integrity in civil aviation in order to understand the objectives and constraints of existing GNSS integrity monitoring systems. A thorough analysis of GNSS-based ETC systems and of GNSS navigation in urban environments is done afterwards with the aim of identifying the most suitable road toll schemes, GNSS receiver configurations and integrity monitoring mechanisms. Receiver autonomous integrity monitoring (RAIM) is chosen among other integrity monitoring systems due to its design flexibility and adaptability to urban environments. A nominal pseudorange measurement model suitable for integrity-driven applications in urban environments has been calculated dividing the total pseudorange error into five independent error sources which can be modelled independently: broadcasted satellite clock corrections and ephemeris errors, ionospheric delay, tropospheric delay, receiver thermal noise (plus interferences) and multipath. In this work the fault model that includes all non-nominal errors consists only of major service failures. Afterwards, the GNSS integrity requirements are derived from the relationship between positioning failures and toll charging errors. Two RAIM algorithms are studied. The first of them is the Weighted Least Squares Residual (WLSR) RAIM, widely used in civil aviation and usually set as the reference against which other RAIM techniques are compared. One of the main challenges of RAIM algorithms in urban environments is the high unavailability rate because of the bad user/satellite geometry. For this reason a new RAIM based on the WLSR is proposed, with the objective of providing a trade-off between the false alarm probability and the RAIM availability in order to maximize the probability that the RAIM declares valid a fault-free position. Finally, simulations have been carried out to study the performance of the different RAIM and ETC systems in rural and urban environments. In all cases, the availability obtained with the novel RAIM improve those of the standard WLSR RAIM

Justinia, Hanitravelo Giffona Loysell. "Impacts des technologies numériques sur les exploitations agricoles en France". Thesis, Rennes, Agrocampus Ouest, 2020. https://tel.archives-ouvertes.fr/tel-03711385.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Dans ce travail de thèse, il a constaté que l’étude des technologies numériques dans l’agriculture est récente dans le domaine de l’économie et par un scoping review, il a été identifié certains gaps dont le manque des études empiriques. Ainsi, quatre technologies ont été étudiées : connexion internet, robot de traite, outils d’aide à la décision (OAD) et outils de surveillances électroniques. Dans le secteur du lait, elles augmentent la production mais les effets sont plus importants pour les petites et moyennes exploitations. Plus important encore, les technologies connexion internet et OAD sont bénéfiques à tous les agriculteurs, utilisateurs ou non, puisque grâce à la proximité physique, ils arrivent à capter les effets d’agglomération techniques.Aussi, il a été trouvé qu’il existe un certain effet de rebond dans l’impact des technologies sur la production d’effluent. La contribution de la thèse est tout d’abord,nous avions été le premier, à notre connaissance, à avoir pu estimer ces effets à l’échelle nationale, effectivement les données étant encore très récentes l’appariement de plusieurs sources a été notre premier défi. Ensuite, nous avions appliqué deux nouvelles approches pour estimer les effets d’une utilisation de technologie, le Two-Stage least square (Geraci et al., 2014) et le Coarsening Exact Matching (Iacus et al, 2008) qui promettent des résultats plus pertinents pour notre contexte de donnée en coupe transversale et présentant une endogénéité. Enfin, la dernière contribution de la thèse est d’apporter des recommandations afin de permettre aux politiques publiques de comprendre les effets des nouvelles technologies et promouvoir les meilleures d'entre elles
In this thesis, it was found that the subject of study of digital technologies is still recent in the field of agricultural economics. Thus, through a scoping review, gaps were identified whose lack of empirical studies, as well as today's digital technologies, can be categorized into four groups: connection, recording, decision and execution. In the milk sector, these innovations increase production, but these advantages are inversely proportional to the intensity of production. In addition, internet connection technologies and decision support tools are beneficial to all farmers whether they are users or not. Since, thanks to their proximity, they manage to capture more agglomeration advantage. Also, it was found that there is a rebound effect as to the impact of these technologies on the manure production. The contributions of the thesis are that, first of all, it represents the first estimations, to our knowledge, of impacts of digital technologies on a farm on a national scale. Indeed, the data still very recent, matching multiple sources was our first challenge. As well, our estimation methods, namely the Two-Stage least square (2SRI) and the Coarsening Exact Matching (CEM), are new approaches and have more relevant results especially in our context of cross-sectional data with endogeneity. Finally, the last contribution is to make recommendations to enable public policies to understand the effects of new technologies and promote the best of them

Amante, Joseph David. "Scanning Methods as Monitoring, Verification, and Accounting tools for CO₂ Sequestration in Unconventional Gas Reservoirs". Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/76047.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Unconventional gas reservoirs in carbon dioxide sequestration activities is a relatively new and unexplored concept currently undergoing pilot scale testing. Sequestration has the potential for enhancing gas recovery while mitigating carbon dioxide to long term storage structures. Due to the extremely complex systems associated with these unconventional reservoirs, modeling becomes difficult to predict accurately. This thesis presents methods to increase the confidence of inferred parameter testing for unconventional reservoir sequestration in both seam coal bed methane wells and a shale wells. Various tests include the use of computed tomography coupled with Avizo modeling software, inductively coupled mass spectrometer fluid transport analysis, pressure transient build tests, liquid level detection, and desorption analysis coupled with cleat image analysis. Analyses of coals performed by both environmental scanning electron microscope (ESEM) and micro CT demonstrate that distributions of cleat porosity in coals are anisotropic and not correlated to the seam depth or location. ESEM is used with micro CT scanning to verify the results before and after the impregnation of the carbonic acid. The micro CT data in Avizo Fire© was used calculate an increase in cleat permeability by 25%. The increase of major flow pathways is caused by the dissolution of carbonates. Changes in the structures were observed qualitatively through ESEM and micro CT and quantitatively through Avizo and inductively coupled mass spectrometry. The results of comparative study between the cleat structures and the desorption of various seams indicate a trend in the cleat porosity and the desorption rate of the coals as well as the cleat porosity and the total gas in various seams.
Master of Science

Knight, Marlene. "The influence of art on adherence to TB treatment in patients using the ' eMUM ' electronic dose monitoring tool-a pilot study". Thesis, 2014.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Health care workers are often reluctant to start anti-retroviral therapy (ART) in patients on Mycobacterium tuberculosis (TB) treatment. Reasons include fear of reduced adherence in response to the high pill burden of concomitant TB treatment and ART, risk of Immune reconstitution inflammatory syndrome (IRIS) and cumulative side effects. On the other hand, earlier initiation of ART leads to more rapid restoration of the immune-competence needed to cure the tuberculosis and the enhancement of immune responses to other specific pathogens thereby reducing the risk of opportunistic infections. Health care workers want patients to be adherent as it improves patient outcome, prevents the spread of TB, decreases the risk for treatment failure, prevents the emergence of multi-drug resistant and extensively drug resistant TB and reduces cost of treatment. The aim of this study was to measure whether adherence to TB medication changes when ART is added to a patient’s TB medication regimen. Consented adults (>18years) diagnosed with pulmonary TB and Human Immunodeficiency Virus (HIV) coinfection were enrolled in the study. Study participants were followed from one month before initiating ART and for the first month that the patient was taking ART. Adherence was measured before and after starting ART using an electronic dose monitoring (‘eMUM’) tool, pill count and patient self-report. The study results shows that the change in adherence is not statistically significant and health care workers can thus confidently prescribe ART in patients on TB treatment, without fear of decline in patient adherence.

Libros sobre el tema "Electronic monitoring tool":

Petrova, Inga. Digital technologies as a financial control tool. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1234413.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

The textbook reveals the concept and meaning of digital technologies, the legal nature of information interaction in the implementation of control measures based on general theoretical concepts and regulatory legal acts. Special attention is paid to the types of information systems used in the control process in the financial and budgetary sphere. The necessity of creating information systems based on international experience, global indices and rules of the Organization for Economic Cooperation and Development (OECD) is justified. The article defines the specific characteristics of the state information systems used in the control (monitoring) in the financial and budgetary sphere, and also considers the subsystems that make up the state integrated information system "Electronic Budget" and other information systems in the information space of the Russian Federation. The article analyzes interdepartmental information interaction and digital methods that ensure the protection of information in the course of financial control. For graduate students, postgraduates and teachers of law and non-legal universities, as well as for practitioners.

K, Narana M. y Education & Research Network Project (Indian Institute of Science, Bangalore. Dept. of Electrical Communication Engineering), eds. Netmon, an SNMP based network monitoring tool. Bangalore: Dept. of Electrical Communication Engineering, Indian Institute of Science, 1995.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Mark, Wood, United States. National Aeronautics and Space Administration. y Cornell University. Dept. of Computer Science., eds. Tools for monitoring and controlling distributed applications. Ithaca, N.Y: Cornell University, Dept. of Computer Science, 1991.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Alagoz, Esra, Kim Johnson, Andrew Quanbeck y David Gustafson. Technology-Based Interventions for Late-Life Addiction. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199392063.003.0011.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Late-life addiction has been a neglected topic in the field of substance-use disorders research. Research suggests that with the aging baby-boomer generation, decline in fertility rates, and increases in life expectancy, there will be an increasing demand on the substance-abuse treatment systems designed specifically for individuals aged 65 and older in the next decade. Emerging technologies such as electronic health records, dashboards, communication tools, and new-generation monitoring devices offer significant opportunities to advance the treatment and recovery management of substance use disorders. This chapter explains the emerging technologies that are being used in addiction treatment and proposes guidelines for how these systems can be adopted for older adults by drawing on experiences from ElderTree, an interactive health technology designed for older populations.

Capítulos de libros sobre el tema "Electronic monitoring tool":

Gies, Stephen V. "The Use of Electronic Monitoring as a Supervision Tool". En Sexual Violence, 95–117. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-44504-5_7.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Zhang, Hongming. "Implementation of the Online Transient Security Assessment Tool for RAS Real-Time Operation Monitoring". En Power Electronics and Power Systems, 99–116. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67482-3_4.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Uhlen, Kjetil, Dinh Thuc Duong y David Karlsen. "Use of Voltage Stability Monitoring and Transient Stability Monitoring Tools at the Nordic Power System Operators: Introduction of Synchrophasor Applications in the Control Room". En Power Electronics and Power Systems, 181–97. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67482-3_9.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Schlag, Mareike, Kai Brune, Hauke Brüning, Michael Noeske, Célian Cherrier, Tobias Hanning, Julius Drosten et al. "Extended Non-destructive Testing for Surface Quality Assessment". En Adhesive Bonding of Aircraft Composite Structures, 119–222. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-92810-4_3.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

AbstractThis chapter introduces various extended non-destructive testing (ENDT) techniques for surface quality assessment, which are first characterized, then enhanced, and finally applied to assess the level of pre-bond contaminations intentionally applied to carbon fiber reinforced plastic (CFRP) adherends following the procedures described in the previous chapter. Based on two user cases comprising different scenarios that are characteristic of either aeronautical production or repair, the detailed tests conducted on two types of sample geometry, namely flat coupons and scarfed pilot samples with a more complex shape, form the basis for applying the advanced ENDT procedures for the monitoring of realistic and real aircraft parts, as will be described in Chap. 10.1007/978-3-319-92810-4_5. Specifically, the reported investigations were performed to assess the surface quality of first ground and then intentionally contaminated CFRP surfaces using the following ENDT tools: the aerosol wetting test (AWT), optically stimulated electron emission (OSEE), two differently implemented approaches based on electronic noses, laser-induced breakdown spectroscopy (LIBS), Fourier-transform infrared (FTIR) spectroscopy, laser-induced fluorescence (LIF), and laser vibrometry.

Schoppe, K. H. "IoT and I4.0: electronic live tool integrated monitoring (eltimon)". En International Conference on Gears 2017, 1219–34. VDI Verlag, 2017. http://dx.doi.org/10.51202/9783181022948-1219.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Panina, Daria. "Electronic Monitoring in the Workplace". En Encyclopedia of Human Resources Information Systems, 314–20. IGI Global, 2009. http://dx.doi.org/10.4018/978-1-59904-883-3.ch047.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Recent advances in technology have led to the rapid development of electronic monitoring in the workplace (Chen & Ross, 2007). Electronic monitoring is widely used in many industries, and there is no doubt that the size of the workforce subjected to it continues to grow (American Management Association, 2005; D’Urso, 2006). It is used by organizations due to its potential to optimize supervision and control processes, protect company assets, safeguard property information, and avoid costly litigation (Case & Young, 2002; Friedman & Reed, 2007). Electronic monitoring can become a central organizational tool for human resource management as well. It can have a profound impact on several HR functions. For example, an electronic monitoring system may be used as a source of data for performance management and performance evaluation and provide the basis for promotion, training, and development decisions (Wells, Moornan, & Werner, 2007). Due to these capabilities, electronic monitoring affects an array of work-related attitudes and behaviors of employees and management (Stanton, 2000b). Existing research is focusing on identifying the ways to make electronic monitoring acceptable to all stakeholders, by elucidating electronic monitoring designs that help maintain the motivation and well-being of individuals. However, we are only beginning to address the issue of the effects of organizational culture and human resource strategy on the role of electronic monitoring and its effectiveness within specific organizational contexts (Chen & Ross, 2005). These contextual factors may determine the role that electronic monitoring plays in managing human resources, from being one of the technology-enhanced human resource management practices devolved to line managers, to being a central part of the overall human resource strategy that supports various HR functions within an organization. The purpose of this article is to present a model of electronic monitoring effectiveness that combines the major electronic monitoring characteristics, their individual and organizational outcomes, and contextual variables that affect electronic monitoring acceptance and use.

Andreevskaia, A., R. Abi-Aad y T. Radhakrishnan. "Agent-Mediated Knowledge Acquisition for User Profiling". En Data Warehousing and Mining, 1486–501. IGI Global, 2008. http://dx.doi.org/10.4018/978-1-59904-951-9.ch085.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

This chapter presents a tool for knowledge acquisition for user profiling in electronic commerce. The knowledge acquisition in e-commerce is a challenging task that requires specific tools in order to facilitate the knowledge transfer from the user to the system. The proposed tool is based on a hierarchical user model and is agent-based. The architecture of the tool incorporates four software agents: processing agent maintaining the user profile, validating agent interacting with the user when information validation is needed, monitoring agent monitoring the effects of the changes made to the user profile, and a filtering agent ensuring the safe information exchange with other software.

Andreevskaia, A., R. Abi-Aad y T. Radhakrishnan. "Agent-Mediated Knowledge Acquisition for User Profiling". En Intelligent Agents for Data Mining and Information Retrieval, 164–87. IGI Global, 2004. http://dx.doi.org/10.4018/978-1-59140-194-0.ch011.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

"Spirometry". En Emergencies in Respiratory Medicine, editado por Robert Parker, Catherine Thomas y Lesley Bennett, 335–38. Oxford University Press, 2007. http://dx.doi.org/10.1093/med/9780199202447.003.0056.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Spirometry 336 When performed correctly, spirometry is a valuable tool which helps to classify a respiratory disorder. It is rarely indicated in the acute emergency setting; although is of significant importance in the management of patients with neuromuscular respiratory failure (FVC monitoring). • Modern hand-held electronic devices allow simple analysis....

Kamalaeswari, Ra y V. Ceronmani Sharmila. "Threat Model for Secure Health Care Data Using EMR, EHR and Health Monitoring Devices". En Recent Trends in Intensive Computing. IOS Press, 2021. http://dx.doi.org/10.3233/apc210259.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

The main aim of this project is to propose a threat modeling framework that promotes the security of health care services. The threat model is used to analyze the cyber threats that makes the electronic health monitoring devices vulnerable to a cyber-attack. The model also helps in strengthening the security of the software-based web applications like EMR and EHR used in a health care organization. The information assets are identified and the threat agents are eliminated considering the software, web application and monitoring devices as attack surface. The major goal of this threat model is to analyze and establish the trust boundaries in the OpenEMR that render a secure data transmission. We use a STRIDE threat model and a DFD based approach using the OWASP threat modeling tool. The SIEM tools provide a continuous security methodology to document the process and result.

Actas de conferencias sobre el tema "Electronic monitoring tool":

Fassbender, Silvia U. y Klaus Kraemer. "Acoustic microscopy: a powerful tool to inspect microstructures of electronic devices". En NDE for Health Monitoring and Diagnostics, editado por Norbert Meyendorf, George Y. Baaklini y Bernd Michel. SPIE, 2003. http://dx.doi.org/10.1117/12.483797.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Sreevalsan-Nair, Jaya, Erwin Van Nieuwenhuyse, Ingrid Hotz, Lars Linsen y Bernd Hamann. "An interactive visual exploration tool for Northern California's water-monitoring network". En Electronic Imaging 2007, editado por Robert F. Erbacher, Jonathan C. Roberts, Matti T. Gröhn y Katy Börner. SPIE, 2007. http://dx.doi.org/10.1117/12.703695.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Van Staden, F. R. y H. S. Venter. "Adding digital forensic readiness to electronic communication using a security monitoring tool". En 2011 Information Security for South Africa (ISSA). IEEE, 2011. http://dx.doi.org/10.1109/issa.2011.6027537.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Inoyatov, Bekhruz D., Aljendy Raseel, Vladimir N. Tulsky y Shokhin D. Dzhuraev. "Power Quality Monitoring as a Tool for Phase Conductors Diagnostics". En 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus). IEEE, 2019. http://dx.doi.org/10.1109/eiconrus.2019.8656913.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Suresh, Nitha Rachel, Nikhil Malhotra, Rohit Kumar y B. Thanudas. "An integrated data exfiltration monitoring tool for a large organization with highly confidential data source". En 2012 4th Computer Science and Electronic Engineering Conference (CEEC). IEEE, 2012. http://dx.doi.org/10.1109/ceec.2012.6375395.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ofusori, Lizzy Oluwatoyin y Paul Kariuki. "The Power of WhatsApp as a Communication Tool for Elections Observation and Monitoring in KwaZulu-Natal". En ICEGOV '17: 10th International Conference on Theory and Practice of Electronic Governance. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3047273.3047398.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Evrard, Damien y Daniel Brissaud. "Energy Efficiency Design Method for Electrical and Electronic Equipments". En ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82538.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Energy consumption during the use phase often contributes significantly to the overall energy demand and to the environmental impacts of an elect(on)ic product’s lifecycle. Therefore, regulations, standards, and customers tend to demand that the electronic industry supplies products with lesser consumption. However, manufacturers lack of systematic methods and tools to integrate energy consumption into their design projects from the early design phases. This paper presents the Synergico method which is meant to be incorporated in the current design practices of manufacturing companies, therefore helping design more energetically efficient electr(on)ic products without compromising the other design criteria (ergonomics, performances, usage value, quality, cost, delay, etc.). This method is based on three tools to use from the earliest design phases. Firstly, an In-Use Energy consumption indicator providing an assessment of the energy consumption during the use phase during each design phase. Thanks to the consideration of several use scenarios, it calculates values of the product’s energy consumption for each product sub-assembly, and each operating mode, thus monitoring the consumption and compliance of a product with design objectives. Secondly, a Guideline-based tool adapted to electronic products. These guidelines can easily be filtered to consider only the most relevant ones according to the context (design phase, expert concerned, scope of the guideline, etc.). Thirdly, a Lifecycle Check tool to verify that no pollution trade-offs, between life cycle phases, would hinder the design of an energy efficient product with good overall environmental performances. A case study illustrates the use and integration of the Synergico method and the way it coordinates the tools.

Saerens, Lien, Thomas De Beer, Jean Paul Remon y Chris Vervaet. "Raman Spectroscopy as a Process Analytical Tool for In-line and Real-time Monitoring of a Pharmaceutical Hot-melt Extrusion Process". En The 1st Electronic Conference on Pharmaceutical Sciences. Basel, Switzerland: MDPI, 2011. http://dx.doi.org/10.3390/ecps2011-00510.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Prasad, Vijaysai, Mark D. Osborn, Shirley S. Au, K. Ravi Chandra Reddy, Sunil S. Shah, Nishith P. Vora y Anthony Gryscavage. "Predictive Heat Exchanger Efficiency Monitoring". En ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72007.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

The performance of heat exchangers degrades with time due to fouling or deposition of material on the heat transfer surface. The fouling of critical exchangers in manufacturing plants results in a significant cost impact in terms of production losses, energy efficiency, and maintenance costs. While most plants monitor their exchangers to some degree, the ability to effect real and sustainable improvements requires four components: (1) real time monitoring; (2) an advance warning mechanism; (3) the ability to diagnose the cause of fouling; and (4) the ability to treat the cause in order to slow or reverse the degradation. CHeX is a comprehensive tool which monitors, predicts, and diagnoses heat exchanger performance. The unique features of this advanced technology include: numerous data cleaning steps to improve data quality and isolate a net fouling trend, an adaptive model which learns from the past to predict performance three years in advance, and knowledge-based diagnostics which identify the probable cause(s) of fouling and recommend corrective actions. The final control action is performed by a field engineer in adjusting the fouling treatment. The scope of the current paper includes only the detection and prediction features. To date, CHeX has been validated at three chemical processing plants, for fourteen exchangers. Selected case studies shall be presented to demonstrate the power of its algorithms over traditional calculations.

Otto, A., E. Kaulfersch, P. Singh, C. Romano, M. Hildebrandt y S. Rzepka. "PHM Features for Large Circuit Boards to Be Implemented Into Electric Drivetrain Applications". En ASME 2020 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/ipack2020-2614.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Abstract Canary structures being used as early warning indicators represent an important tool for condition and health monitoring of electronic components and systems. In this paper, printed circuit boards with canary structures based on SMD 2512 ceramic chip resistors with reduced solder pad sizes were studied. Focus of these investigations was set on thermo-mechanical and mechanical stresses caused by passive thermal cycling as well as by vibrational loads. For this purpose, experimental methods such as deformation analysis and accelerated ageing tests as well as finite element based methods were applied. In addition, an outlook on the implementation of these canary structures into dual inverter electronic control boards for electrical powertrain applications will be given.

Informes sobre el tema "Electronic monitoring tool":

Simon, James E., Uri M. Peiper, Gaines Miles, A. Hetzroni, Amos Mizrach y Denys J. Charles. Electronic Sensing of Fruit Ripeness Based on Volatile Gas Emissions. United States Department of Agriculture, octubre de 1994. http://dx.doi.org/10.32747/1994.7568762.bard.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

An electronic sensory system for the evaluation of headspace volatiles was developed to determine fruit ripeness and quality. Two prototype systems were designed, constructed, and later modified. The first is an improved version of our original prototype electronic sniffer using a single head sensing unit for use as a single or paired unit placed on an individual fruit surface for applications in the field, lab, or industry. The second electronic sniffer utilizes a matrix of gas sensors, each selected for differential sensitivity to a range of volatile compounds. This system is more sophisticated as it uses multiple gas sensors, but was found to enhance the ability of the sniffer to classify fruit ripeness and quality relative to a single gas sensor. This second sniffer was designed and constructed for the sampling of fresh-cut or whole packs of fruits such as packaged strawberries and blueberries, and can serve as a prototype for research or commercial applications. Results demonstrate that electronic sensing of fruit ripeness based on aromatic volatile gas emissions can be used successfully with fresh frits. Aroma sensing was successful for classifying ripeness in muskmelons, including different cultivars, apples, blueberries, strawberries, and in a complimentary BARD project on tomatoes. This system compared favorably to the physicochemical measurements traditionally employed to assess fruit maturity. This nondestructive sensory system can detect the presence of physically damaged fruits and shows excellent application for use in quality assessment. Electronic sensors of the tin oxide type were evaluated for specificity toward a wide range of volatiles associated with fruit ripeness. Sensors were identified that detected a broad range of alcohols, aldehydes, esters, hydrocarbons, and volatile sulfur compounds, as well as individual volatiles associated with fruit ripening across a wide concentration range. Sensors are not compound specific, thus, the matrix of sensors coupled with discrimination analysis provides a fingerprint to identify the presence of compounds and to assess alterations in fresh products due to alterations in volatile emissions. Engineering developments led to the development of a system to compensate for temperature and relative humidity relative to on-line aroma sensing with melons for ripeness determination and to reduce response time, thus permitting the electronic sniffer to be used for monitoring both fresh and processed food products. The sniffer provides a fast, reliable and nondestructive tool to assess fruit ripeness and quality. We hope that our work will foster the introduction and utilization of this emerging technology into the agricultural and horticultural

Tidd, Alexander N., Richard A. Ayers, Grant P. Course y Guy R. Pasco. Scottish Inshore Fisheries Integrated Data System (SIFIDS): work package 6 final report development of a pilot relational data resource for the collation and interpretation of inshore fisheries data. Editado por Mark James y Hannah Ladd-Jones. Marine Alliance for Science and Technology for Scotland (MASTS), 2019. http://dx.doi.org/10.15664/10023.23452.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

[Extract from Executive Summary] The competition for space from competing sectors in the coastal waters of Scotland has never been greater and thus there is a growing a need for interactive seascape planning tools that encompass all marine activities. Similarly, the need to gather data to inform decision makers, especially in the fishing industry, has become essential to provide advice on the economic impact on fishing fleets both in terms of alternative conservation measures (e.g. effort limitations, temporal and spatial closures) as well as the overlap with other activities, thereby allowing stakeholders to derive a preferred option. The SIFIDS project was conceived to allow the different relevant data sources to be identified and to allow these data to be collated in one place, rather than as isolated data sets with multiple data owners. The online interactive tool developed as part of the project (Work Package 6) brought together relevant data sets and developed data storage facilities and a user interface to allow various types of user to view and interrogate the data. Some of these data sets were obtained as static layers which could sit as background data e.g. substrate type, UK fishing limits; whilst other data came directly from electronic monitoring systems developed as part of the SIFIDS project. The main non-static data source was Work Package 2, which was collecting data from a sample of volunteer inshore fishing vessels (<12m). This included data on location; time; vessel speed; count, time and position of deployment of strings of creels (or as fleets and pots as they are also known respectively); and a count of how many creels were hauled on these strings. The interactive online tool allowed all the above data to be collated in a specially designed database and displayed in near real time on the web-based application.

Lavrentieva, Olena O., Lina M. Rybalko, Oleh O. Tsys y Aleksandr D. Uchitel. Theoretical and methodical aspects of the organization of students’ independent study activities together with the use of ICT and tools. [б. в.], septiembre de 2019. http://dx.doi.org/10.31812/123456789/3244.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

In the article the possibilities and classification of ICTs and tools that can be used in organizing students’ independent study activities of higher education institutions has been explored. It is determined the students’ independent study activities is individual, group, collective activity and is implemented within the process of education under the condition of no pedagogy’s direct involvement. It complies with the requirements of the curriculum and syllabus and is aimed at students’ acquisition of some social experiences in line with the learning objectives of vocational training. The analysis of the latest information and technological approaches to the organization of students’ independent study activities made it possible to determine the means of realization of the leading forms of organization for this activity (independent and research work, lectures, consultations and non-formal education), to characterize and classify the ICTs and tools that support presentation of teaching materials, electronic communication, mastering of learning material, monitoring of students’ learning and cognitive activity, such as ones that serve for the sake of development and support of automated training courses, systems of remote virtual education with elements of artificial intelligence, which implement the principle of adaptive management of learning and the organization of students’ independent study activities. The paper provides the insight into the essence of the conducted investigation on the assesses of the effectiveness of ICTs and tools in the process of organizing students’ independent study activities.

Lehotay, Steven J. y Aviv Amirav. Fast, practical, and effective approach for the analysis of hazardous chemicals in the food supply. United States Department of Agriculture, abril de 2007. http://dx.doi.org/10.32747/2007.7695587.bard.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Resumen

Background to the topic: For food safety and security reasons, hundreds of pesticides, veterinary drugs, and environmental pollutants should be monitored in the food supply, but current methods are too time-consuming, laborious, and expensive. As a result, only a tiny fraction of the food is tested for a limited number of contaminants. Original proposal objectives: Our main original goal was to develop fast, practical, and effective new approaches for the analysis of hazardous chemicals in the food supply. We proposed to extend the QuEChERS approach to more pesticides, veterinary drugs and pollutants, further develop GC-MS and LC-MS with SMB and combine QuEChERS with GC-SMB-MS and LC-SMB-EI-MS to provide the “ultimate” approach for the analysis of hazardous chemicals in food. Major conclusions, solutions and achievements: The original QuEChERS method was validated for more than 200 pesticide residues in a variety of food crops. For the few basic pesticides for which the method gave lower recoveries, an extensive solvent suitability study was conducted, and a buffering modification was made to improve results for difficult analytes. Furthermore, evaluation of the QuEChERS approach for fatty matrices, including olives and its oil, was performed. The QuEChERS concept was also extended to acrylamide analysis in foods. Other advanced techniques to improve speed, ease, and effectiveness of chemical residue analysis were also successfully developed and/or evaluated, which include: a simple and inexpensive solvent-in-silicone-tube extraction approach for highly sensitive detection of nonpolar pesticides in GC; ruggedness testing of low-pressure GC-MS for 3-fold faster separations; optimization and extensive evaluation of analyte protectants in GC-MS; and use of prototypical commercial automated direct sample introduction devices for GC-MS. GC-MS with SMB was further developed and combined with the Varian 1200 GCMS/ MS system, resulting in a new type of GC-MS with advanced capabilities. Careful attention was given to the subject of GC-MS sensitivity and its LOD for difficult to analyze samples such as thermally labile pesticides or those with weak or no molecular ions, and record low LOD were demonstrated and discussed. The new approach of electron ionization LC-MS with SMB was developed, its key components of sample vaporization nozzle and flythrough ion source were improved and was evaluated with a range of samples, including carbamate pesticides. A new method and software based on IAA were developed and tested on a range of pesticides in agricultural matrices. This IAA method and software in combination with GC-MS and SMB provide extremely high confidence in sample identification. A new type of comprehensive GCxGC (based on flow modulation) was uniquely combined with GC-MS with SMB, and we demonstrated improved pesticide separation and identification in complex agricultural matrices using this novel approach. An improved device for aroma sample collection and introduction (SnifProbe) was further developed and favorably compared with SPME for coffee aroma sampling. Implications, both scientific and agricultural: We succeeded in achieving significant improvements in the analysis of hazardous chemicals in the food supply, from easy sample preparation approaches, through sample analysis by advanced new types of GC-MS and LCMS techniques, all the way to improved data analysis by lowering LOD and providing greater confidence in chemical identification. As a result, the combination of the QuEChERS approach, new and superior instrumentation, and the novel monitoring methods that were developed will enable vastly reduced time and cost of analysis, increased analytical scope, and a higher monitoring rate. This provides better enforcement, an added impetus for farmers to use good agricultural practices, improved food safety and security, increased trade, and greater consumer confidence in the food supply.