Siga este enlace para ver otros tipos de publicaciones sobre el tema: Kemi - Fysikalisk kemi.

Tesis sobre el tema "Kemi - Fysikalisk kemi"

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte los 50 mejores tesis para su investigación sobre el tema "Kemi - Fysikalisk kemi".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.

1

Haratizadeh, Hamid. "Optical characterization of GaN/AlGaN quantum well structures /". Linköping : Univ, 2004. http://www.bibl.liu.se/liupubl/disp/disp2004/tek866s.pdf.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Rippner, Blomqvist Brita. "Non-ionic block copolymers and proteins at the air-water interface". Doctoral thesis, Stockholm : Surface Chemistry, Department of Chemistry, Royal Institute of Technology, Ytkemiska institutet, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-165.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Borgström, Magnus. "Controlling charge and energy transfer processes in artificial photosynthesis : from picosecond to millisecond dynamics /". Uppsala : Acta Universitatis Upsaliensis : Universitetsbiblioteket [distributör], 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-6017.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Vargas-Florencia, Dulce. "Phase transitions in porous media studied by NMR". Doctoral thesis, KTH, Fysikalisk kemi, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4197.

Texto completo
Resumen
This Thesis presents studies of phase transitions ocurring in porous media. The investigated phase transitions include melting/crystallization, surface pre-melting and liquid-liquid phase separation of binary mixtures. A combination of NMR techniques, already existing and newly developed and ranging from cryoporometry to elaborate self-diffusion and spin-relaxation experiments, was applied in order to detect and quantify the effect of finite size constraints on those phase transitions. By relating the results to physico-chemical models, the difference in behaviour with respect to that of bulk was exploited and related to pore morphology and surface properties in diverse porous systems. NMR cryoporometry is based on the detection of the melting/freezing temperature shifts with respect to those in the bulk state to obtain mean pore size and pore size distribution. We extended the size range in which this can be done in porous matrices of both hydrophilic and hydrophobic nature to a 1 μm-600 nm upper limit. This was achieved by introducing two new probe liquids namely octamethylcyclotetrasiloxane (OMCTS) and zinc nitrate hexahydrate Zn(NO)3•H2O. The thickness of the pre-molten surface layer that appears at the interface of frozen octamethylcyclotetrasiloxane (OMCTS) to the matrix in controlled porous glasses was quantified and modeled including its temperature and wall-curvature dependence. The results reveal that the layer thickness depends logarithmically on the deviation from the pore melting point, while for the largest pore investigated this turns into a power law with the exponent of –1/2. Diverse NMR techniques were used not only to detect solely the surface layer and the evolution of the surface melting, but also to distinguish the latter from the volume melting transition within the pores. The morphologies of two nanostructured materials, sintered films of TiO2 nanoparticles and a mesoporous foam obtained by surfactant-templated synthesis, were investigated. These two porous matrices have very different structures but fall into the size range accessible by NMR cryopormetry and their characterization plays an important role in their future applications. They were studied by exploiting the difference between melting and freezing temperature shifts ΔTm and ΔTf, respectively, with respect to that of bulk. NMR cryoporometry was shown to be a suitable alternative and an excellent complement to other porosimetry techniques, namely mercury intrusion and gas sorption porosimetries to analyze the pore structure and pore size distribution because of the unique and model-independent access to information about pore shape. By combining NMR cryoporometry with NMR diffusion experiments holds great potential for accessing information about pore interconnectivity. By diverse NMR techniques we provided experimental evidence that corroborate that liquid-liquid phase separation of a binary mixture imbibed in porous media actually occurs within the individual pores. The size distribution of the phase-separated domains was measured.
QC 20100927
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Rådberg, Weronica. "Determination of Distribution of Fines in a Paper Structure using Fluorescence Microscopy- an introduction". Thesis, Karlstads universitet, Institutionen för kemi, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-6469.

Texto completo
Resumen
When making paper, fibers and additives are suspended in water to a fiber suspension. The sheet is formed by draining a specific amount of suspension through a wire-cloth. The procedure is well known, but the underlying mechanisms are not fully understood. To understand how the different particles such as fines, fibers, retention aids and other additives interact with each other, further research is needed. This knowledge is important because in the production of paper, the retention and the distribution of fines and additives within a paper structure are vital parameters for the properties and also for the profitability of the final product. In this study fluorescence microscopy was used to study fines from bleached kraft pulp which were labeled with fluorophores. When the fines exhibit fluorescence we can study their individual trajectories and understand more about the interactions between fibers, fines and additives in different chemical environments. Fines from bleached kraft pulp have no fluorescent properties and therefore it is necessary to bind a fluorophore to the material. It was difficult to find a suitable fluorophore which binds covalently to the cellulose, the dominating part of fines. The result from this study was that the labeled fines did exhibited fluorescence. As the fines were aggregated no individual trajectories could be analyzed with fluorescence microscopy. Further development of the technique for labeling fines must be carried out to avoid aggregation of fines.
Vid tillverkning av papper, blandas fibrer och tillsatser i vatten till en fibersuspension. Arket bildas genom att avvattna suspensionen genom en vira. Förfarandet är välkänt men för att förstå mekanismerna måste vi förstå hur olika partiklar som fines, fibrer, retentionsmedel och andra tillsatser interagerar med varandra. Denna kunskap är viktigt eftersom i produktionen av papper är retention och distribution av fines och tillsatser i en pappersstruktur avgörande parametrar för de egenskaper, och även för lönsamheten, som erhålls i den slutliga produkten. I denna studie används fluorescensmikroskopi för att kunna studera fines av blekt sulfatmassa som blivit märkta med fluoroforer. När materialet uppvisar fluorescens kan deras individuella rörelsemönster studeras och därmed kan interaktionen som sker mellan fibrer, fines och tillsatser i olika kemiska miljöer förstås. Fines av blekt sulfatmassa har inga fluorescerande egenskaper och därför är det nödvändigt att binda en fluorfor till materialet. Det var svårt att hitta en lämplig fluorofor som binder kovalent till cellulosa, den dominerande delen av fines. Resultatet från denna studie visar att lösningarna med fluorescentmärkta fines uppvisade fluorescens. Eftersom det skedde en aggregering av fines kunde inte deras individuella rörelsemönster analyseras med fluorescensmikroskopi. Modifiering av märkningen måste göras för att kunna undvika aggregeringen av fines.
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Eriksson, Malin. "The Influence of Molecular Adhesion on Paper Strength". Doctoral thesis, Stockholm, Department of Fibre and Polymer Technology, School of Chemical Science and Engineering, KTH, Royal Institute of Technlology, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4101.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Jalan, Ishita. "Film morphology for organic solar cells : Effect of Solubility and Gravity Conditions". Licentiate thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper (from 2013), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-82748.

Texto completo
Resumen
Organic photovoltaics is a promising environmentally friendly technology, due to their printability, light-weight nature and mechanical flexibility, and the possibility to use off-grid. Research and development in this field has resulted in power conversion efficiencies of over 15%. To further improve the efficiency, it is important to understand the connection between the morphology of the active layer and the performance of the device.  This thesis focuses on understanding on a molecular level of the morphology formation in a thin coated film of a polymer bend, using two different approaches. One approach will focus on the thermodynamics of conjugated polymers in relation to the morphology, by using the Hansen solubility Parameters (HSP) and solution chemistry. The second approach focuses on understanding phase separation between the two polymers in the active layer. To be able to study phase separation, films were fabricated under microgravity conditions, as previous studies show that in these conditions phase separation mechanism is slowed down. Atomic force microscopy is used to characterize the resulting morphology of the thin films.  Preliminary studies in this thesis showed that using HSP is a good tool, to understanding solvent-solute and solute-solute interactions in solution and to guide the final film morphology in relation to solubility. Furthermore, HSP is a good tool for the preliminary screening of alternative solvents and solvent blends for environmentally friendly processing solvents for upscaling. It was also found that dip coating of films under microgravity conditions provides a tool to study the early stages of the phase separation, as well as facilitate the study of the dependence of the morphology on the thicknesses of the coating. More work is needed to be able to separate the complex effect of hypergravity and to eliminate uncertainty concerning if the deposited wet film is completely dried under the microgravity phase.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Pasquier, Marie. "STUDY OF HANSEN SOLUBILITY PARAMETERS OFPC60BM, F8, TQ1 AND N2200". Thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper (from 2013), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-69358.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Schillebeeckx, Sep. "Morphology of Dip-Coated Polymer Blend Films in Organic Photovoltaics, a Comparison of solvents". Thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper (from 2013), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-69359.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

De, Vlaemynck Thijs. "Study of the effect of solvent and molecular weight of TQ1 on the morphology of TQ1:PC60BM and TQ1:PC70BM spin coated systems". Thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper (from 2013), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-69361.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
11

Taher, Mamoun. "Novel boron compounds in lubrication". Licentiate thesis, Luleå tekniska universitet, Industriell miljö- och processteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25920.

Texto completo
Resumen
Lubricants are used to control friction and reduce wear by preventing direct contact between surfaces in a relative motion. Most of the modern lubricants and lubricant additives have been designed and optimized for ferrous materials. A growing trend towards wider use of lightweight and wear resistant non-ferrous materials calls for new efficient and environmentally friendly Lubricants. Boron compounds are attractive alternatives for the commercially available lubricants and lubricant additives. Some boron compounds have already been proven as efficient friction modifiers, antioxidants, corrosion inhibitors and antiwear additives in lubricants.In this work we focus on design, synthesis, physicochemical characterization and tribological studies of novel boron compounds. Boron based ionic liquids (ILs) and dithiocarbamates (B-DTCs) were designed, synthesized and tribologically characterized. The work was carried out in the following steps: (i) design and synthesis of novel boron compounds; (ii) physicochemical characterization of the synthesized compounds by FTIR, liquid-state (1H, 13C, and 11B) and solid-state (13C and 11B) nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, thermal analysis (TG, DTA, DSC and QMS), powder XRD, density and viscosity measurements; (iii) tribological characterization using four-ball and pin-on-disc tribometers and (iv) surface analysis using Scanning Electron Microscopy coupled with X-ray Energy Dispersive Spectroscopy (SEM/EDS), optical interferometer and stylus profilometer. Some of these new boron-based compounds revealed significantly better antiwear and friction reducing performance on steel-steel contacts compared with fully formulated engine oils. (i) Nine novel ILs of pryrrolidinium bis(salicylato)borate were synthesized and physicochemically characterized. They are solid at room temperature and some of them behave as plastic crystals. Some of these ILs were tested as lubricants at 100 ºC, i.e. above their melting points. These ILs have shown significantly better antiwear and friction reducing performance in lubrication of steel-steel contacts compared to fully formulated synthetic engine oil 5W40.(ii) Nine novel room temperature ionic liquids (RTILs) of pyrrolidinium bis(mandelato)borate were synthesized and physicochemically characterized. These ILs were tribologically tested as 3 wt % additives in polyethylene glycol (PEG) and they have shown considerably better antiwear and friction reducing properties in boundary lubrication of steel-steel contacts at room temperature compared with neat PEG and engine oil 5W40.(iii) Boron based compounds containing alkylborate and dithiocarbamate groups with alkyl substitutes in one molecule were synthesized and physicochemically characterized. The influence of alkyl chain length (butyl and/or octyl substitutes at DTC and borate groups) and heterocyclicity in boron based dithiocarbamate compounds (B-DTCs) on their tribophysical properties as additives in a mineral oil was studied for steel-steel lubricated contacts.
Godkänd; 2012; 20121123 (mamtah); LICENTIATSEMINARIUM Ämne: Gränsytors kemi/Chemistry of Interfaces Examinator: Professor Oleg N. Antzutkin, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet Diskutant: Professor Mark Rutland, Chalmers tekniska högskola, Göteborg Tid: Onsdag den 19 december 2012 kl 10.15 Plats: C305, Luleå tekniska universitet
Los estilos APA, Harvard, Vancouver, ISO, etc.
12

Gowda, Vasantha. "Combined experimental and theoretical studies of dithiocarbamate complexes of yttrium, lanthanum and bismuth". Licentiate thesis, Luleå tekniska universitet, Kemiteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25701.

Texto completo
Resumen
Metal-dithiocarbamate complexes find wide-ranging applications in nanomaterial and metalseparation science, and have potential use as chemotherapeutic, pesticides, and as additives tolubricants. A highly versatile dialkyldithiocarbamate (R2NCS2–) ligand can form stablecomplexes with all the transition elements and also the majority of main group, lanthanide andactinide elements. Here we present structural investigations of the molecular and electronicstructures of dialkyldithiocarbamate complexes with yttrium(III), lanthanum(III), andbismuth(III) of molecular formula [Y{S2CN(C2H5)2}3PHEN], [La{S2CN(C2H5)2}3PHEN], and[Bi2{S2CN-n(C4H9)2}6] (where PHEN=1,10-Phenanthroline) . The experimental solid-state 13Cand 15N cross polarization magic-angle-spinning (CP-MAS) NMR results are reported for allthese three complexes. We also report new single-crystal X-ray structures of heterolepticyttrium, lanthanum, and homoleptic bismuth dialkyldithiocarbamate complexes. Thecomparative analysis of powder XRD patterns and solid-state 13C and 15N CP-MAS spectra ofpolycrystalline yttrium(III) and lanthanum(III) diethyldithiocarbamato-phenanthrolinecomplexes shows the presence of significant structural differences. The diethyldithiocarbamatophenanthrolinecomplex of yttrium has a very similar structural type to a previously reported Xraydiffraction structure for [Nd{S2CN(C2H5)2}3PHEN] whereas, the crystal structure of[La{S2CN(C2H5)2}3PHEN] is considerably more complex. Our NMR and single-crystal X-raydiffraction results suggested polymorphism for bismuth di-n-butyldithiocarbamate complex.Finally, the experimental NMR results are complemented by chemical shifts obtained usingquantum chemical methods and verified the spectral assignments. Overall, our workdemonstrates how different experimental and theoretical methods can be combined that canafford insights into the solid-state structure and bonding environments of metal complexes.
Godkänd; 2014; 20141024 (vasgow); Nedanstående person kommer att hålla licentiatseminarium för avläggande av teknologie licentiatexamen. Namn: Vasantha Gowda Ämne: Gränsytors kemi/Chemistry of Interfaces Uppsats: Combined Experimental and Theoretical Studies on Dithiocarbamate Complexes of Yttrium, Lanthanum, and Bismuth Examinator: Professor Oleg Antzutkin, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet Diskutant: Huvudforskare John V. Hanna, Department of Physics, University of Warwick, Storbritannien Tid: Fredag den 28 november 2014 kl 10.15 Plats: C305, Luleå tekniska universitet
Los estilos APA, Harvard, Vancouver, ISO, etc.
13

Lundin, Lisa. "Solvents and solvent blends for the polymers TQ1 and N2200". Thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper (from 2013), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74693.

Texto completo
Resumen
Abstract The solubility of polymers depends on how well the parameters of the polymers and solvents used resemble each other. The more similar the parameters are, the more likely the polymers are to be dissolved. Hansen´s solubility parameters (HSP) tells us how dispersion forces, polar forces and hydrogen bonding influences the structure of the polymers and thereby their solubility. To be able to manufacture effective organic polymer solar cells in the future, we need more knowledge of how polymers and organic solvents interact with each other. This is an essay on how you could gather more knowledge of how primarily the polymer Poly{[N,N′-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)} , (N2200), but also the polymer Poly[2,3-bis-(3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl], (TQ1) dissolves in different organic solvent blends. It is also a test on using the computer software Hansen´s Solubility Parameters in Practice (HSPiP), to estimate the HSP:s for the polymers and the polymer blend. The HSPiP was good at estimating the Hansen solubility parameters for the solubility test on N2200. The software´s drawing tool in the do it yourself- part (DIY) that is used to create a structure code-string (SMILES) for the polymer, did not work as well in this project. The Optimizer in HSPiP made good suggestions of organic solvent blends for N2200 and TQ1, that dissolved the polymers. o-Xylene and tetrahydronaphthalene were the solvents that dissolved N2200 in the solubility test in 24 h and 50 ֯C and among the organic solvent blends it was toluene/1-methylnaphthalene, tetrahydronaphthalene/methyl acetate, tetrahydronaphthalene/o-Xylene and tetrahydronaphthalene/2-methyltetrahydrofuran that were able to dissolve the polymers in the concentrations of 10.0 mg/ml. N2200 dissolved very well up to 10.0 mg/ml in the calculated solvent blends but on the other hand, the samples became very viscous at that concentration and hardly fluent, if fluent at all. It was more difficult to find organic solvent blends that could dissolve N2200 than it was for TQ1. TQ1 dissolved in all solvent ratios that dissolved N2200.
Sammanfattning   Löslighet hos polymerer beror på hur löslighetsparametrarna hos polymeren och det lösningsmedel man använder, liknar varandra. Ju mer löslighetsparametrarna liknar varandra, desto bättre löser sig polymeren i lösningsmedlet. Hansen´s löslighetsparametrar (HSP) talar om hur dispersionskrafter, polära krafter och vätebindningar påverkar strukturer hos polymerer och därigenom deras löslighet. För att kunna tillverka effektiva organiska polymera solceller i framtiden, behöver vi mer kunskap i hur polymerer och organiska lösningsmedel interagerar med varandra. Detta är en uppsats i hur man kan gå tillväga för att ta reda på mer om hur främst polymeren Poly{[N,N′-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)} , (N2200), men också polymeren Poly[2,3-bis-(3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl], (TQ1) löser sig i olika blandningar av organiska lösningsmedel. Det är också ett försök till att använda dataprogrammet, Hansen´s Solubility Parameters in Practice (HSPiP), för att estimera löslighet hos polymererna och polymerblandningen. Det visade sig att HSPiP, var bra på att estimera Hansens löslighetsparametrar för löslighetstestet på N2200. Programmets ritverktyg i DIY (do it yourself/gör det själv), för att skapa SMILES-kod (kod för den ritade molekylens struktur) för polymeren, visade sig vara mindre bra. Optimeraren i HSPiP visade sig kunna föreslå organiska lösningsmedelsblandningar för N2200 och TQ1 som kunde lösa polymererna. o-Xylene och tetrahydronaftalen var de som löste N2200 i löslighetstestet på 24 h med 50 ֯C och av blandningarna var det toluen/1-methylnaftalen, tetrahydronaftalen/metylacetat, tetrahydronaftalen/o-Xylene och tetrahydronaftalene/2-metyltetrahydrofuran som kunde lösa polymererna i koncentrationer av 10.0 mg/ml. N2200 löste sig bra ända upp till 10.0 mg/ml för de beräknade lösningsmedelsblandningarna men däremot blev proverna väldigt viskösa i den koncentrationen och knappt flytande, om alls flytande. Det var svårare att hitta organiska lösningsmedelsblandningar som fungerade för N2200 medan TQ1 kunde lösa sig i allt som fungerade för N2200.
Los estilos APA, Harvard, Vancouver, ISO, etc.
14

Johansson, Ursula. "Surface reactions on Kaolinite studied by FT-spectroscopy". Licentiate thesis, Luleå tekniska universitet, 1997. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18499.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
15

Gärd, Rune. "FT-IR and FT-Raman studies of colloidal ZnS". Licentiate thesis, Luleå tekniska universitet, 1995. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26295.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
16

Liljenberg, Magnus. "Quantum Chemical Studies of Aromatic Substitution Reactions". Doctoral thesis, KTH, Tillämpad fysikalisk kemi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-206964.

Texto completo
Resumen
In this thesis, density functional theory (DFT) is used to investigate the mechanisms and reactivities of electrophilic and nucleophilic aromatic substitution reactions (SEAr and SNAr respectively). For SEAr, the σ-complex intermediate is preceded by one (halogenation) or two (nitration) π-complex intermediates. Whereas the rate-determining transition state (TS) for nitration resembles the second π-complex, the corresponding chlorination TS is much closer to the σ-complex. The last step, the expulsion of the proton, is modeled with an explicit solvent molecule in combination with PCM and confirmed to be a nearly barrierless process for nitration/chlorination and involves a substantial energy barrier for iodination. It is also shown for nitration that the gas phase structures and energetics are very different from those in polar solvent. The potential energy surface for SNAr reactions differs greatly depending on leaving group; the σ-complex intermediate exist for F-/HF, but for Cl-/HCl or Br-/HBr the calculations indicate a concerted mechanism. These mechanistic results form a basis for the investigations of predictive reactivity models for aromatic substitution reactions. For SEAr reactions, the free energy of the rate-determining TS reproduces both local (regioselectivity) and global reactivity (substrate selectivity) with good to excellent accuracy. For SNAr reactions good accuracies are obtained for Cl-/HCl or Br-/HBr as leaving group, using TS structures representing a one-step concerted mechanism. The σ-complex intermediate can be used as a reactivity indicator for the TS energy, and for SEAr the accuracy of this method varies in a way that can be rationalized with the Hammond postulate. It is more accurate the later the rate-determining TS, that is the more deactivated the reaction. For SNAr reactions with F-/HF as leaving group, the same method gives excellent accuracy for both local and global reactivity irrespective of the degree of activation.

QC 20170510

Los estilos APA, Harvard, Vancouver, ISO, etc.
17

D'Amario, Luca. "Discovering Hidden Traps : in Nickel Oxide Nanoparticles for Dye-Sensitised Photocathodes". Doctoral thesis, Uppsala universitet, Fysikalisk kemi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-320187.

Texto completo
Resumen
The finite nature of fossil fuels and their effect on the global climate, raised the need to find an alternative source of energy. This source should be environment compatible, cheap and abundant. The light coming from the Sun is a promising alternative. To be fruitful, the solar energy needs to be transformed in storable and transportable energy forms like electricityor fuels. Amongst the most studied techniques dye sensitised devices offer the possibility to be designed for both the scopes: solar-to-electricity and solar-to-fuel conversions. In these applications a photocathode and a photoanode, constructed by mesoporous semisconductor films sensitised with dyes, are placed in series with one another.It follows that the photocurrent generated by one electrode should be sustained by the photocurrent produced by the other electrode. At the moment there is a substantial difference between the conversion efficiencies and the photocurrent produced by photoanodes and photocathodes. In this thesis the reasons for this discrepancy are investigated. The main responsible of the bad performance is identified in the semiconductor normally used in photocathodes, Nickel Oxide (NiO). Electrochemical impedance spectroscopy was used to elucidate the electrical properties of mesoporous NiO films. The study revealed that NiO films are able to carry a large enough current to establish that conductivity is not a limiting factor. The recombination reactions were then accused as the cause of the power losses. A time resolved spectroscopic study revealed that NiO can host two kinds of holes. One of these holes is responsible for a fast dye-NiO recombination (100 ns) and the other one for a slow recombination (10 ms). A cell featuring only the slow dye-NiO recombination would possibly reach high efficiency. The characterisation of the species associated with these two holes was performed by density-of-state assisted spectroelectrochemistry. The holes were found to be trapped by Ni2+ and Ni3+ sites located on the NiO surface forming respectively Ni3+ and Ni4+ states. A study by fs and ns transient absorption spectroscopy revealed that Ni3+ sites can trap a hole in subpicosecond time scale and this hole relaxes into a Ni2+ trap in ns timescale. The control of the Ni2+/Ni3+ratio on the NiO surface was found  to be crucial for a high cell photovoltage. In the thesis these results are discussed and used to propose an explanation and some solutions to the poor performance of NiO-based dye sensitised cells.
Los estilos APA, Harvard, Vancouver, ISO, etc.
18

Fredriksson, Andreas. "Adsorption of heptyl xanthate at the metal sulphide/aqueousinterface". Licentiate thesis, Luleå, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-16791.

Texto completo
Resumen
In sulphide mineral flotation a sufficient hydrophobicity of the mineral surfaces is obtained by the adsorption of collector chemicals at the metal sulphide/aqueous interface. This surface alteration is of fundamental and applied interest. In this thesis, attenuated total reflection infrared spectroscopy has been used to monitor the adsorption kinetics and the orientation of heptyl xanthate when adsorbed onto three solid surfaces - germanium, zinc sulphide and lead sulphide in-situ. The choice of using the ATR technique is because it is very suitable when working with water as solvent, and the choice of germanium as internal reflection element is because of its small penetration depth due to a high refraction index. The Chemical Bath Deposition method has been used to deposit metal sulphides onto germanium internal reflection elements. For determining the adsorption of heptyl xanthate onto lead sulphide a novel method has been tested, and verified as capable in recovering information about surface reactions at a lead sulphide/aqueous interface. In the study of surface reactions the substrate is of vast importance, implying that the chemistry of the surface has to be well characterised. This work has utilized X-ray Photoelectron spectroscopy, and ATR spectroscopy, in the characterisation of the different surfaces. The adsorption kinetics has been followed to adsorption equilibrium at different concentrations. In the case of heptyl xanthate adsorbed at the zinc sulphide/aqueous interface, an adsorption isotherm has been calculated from the equilibrium data. On the assumption that the adsorption step was rate controlling a second order rate equation was derived and adsorption rate data tested according to this equation. In addition, an orientation study of the heptyl xanthate molecule at the different interfaces was performed, which requires polarised infrared light. In the case of heptyl xanthate adorbed onto germanium, both surface excess and a degree of alignment of the alkyl chain from the surface normal has been calculated.
Godkänd; 2004; 20070127 (ysko)
Los estilos APA, Harvard, Vancouver, ISO, etc.
19

Andrén, Henrik. "Studies of artificial mass bias in isotopic measurements by inductively coupled plasma mass spectrometry". Licentiate thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-16881.

Texto completo
Resumen
Mass spectrometry, and especially inductively coupled plasma mass spectrometry (ICP-MS), suffers heavily from mass bias, or instrumental mass discrimination. The nett result of this effect is the preferential transmission, most often of heavier ions through the mass spectrometer. Most work regarding this phenomenon in ICP-MS dates back quite far, and has been interpreted in terms of the space-charge effect. This means that Coulombic forces acting on the beam of positively charged particles extracted from the ICP result in greater dissipation of lighter, and hence more mobile ions from the beam axis. In this work the importance of the space-charge effect as a universal explanation for mass bias is challenged by the results of high precision measurements of isotope ratios. Other than considering some commonly known sources of isotope ratio measurement bias, a not previously considered mechanism of isotopic fractionation has been investigated, i.e. diffusion in solution. It was established that, indeed, diffusion does lead to isotopic fractionation in solution, and although this is a long term process, may contribute to the minor isotopic variations observed in certain aquatic environments. Furthermore it was established that spectral interferences of argone oxide ions could be discerned from the ions of iron using high resolution ICP-MS, thus eliminating this potential source of artificial fractionation. Most significant was the discovery that the extent of mass bias varied throughout the volume of the plasma, and was further affected by sample characteristics, such as analyte concentration and acid strength. This identifies the plasma itself as the major source of instrumental mass discrimination. Varying the sampling position, i.e. the point at which ions are extracted from the plasma, not only affected the measured isotope ratios, but also the precision of such measurements. From these results, it is not recommended to measure at the sampling position providing maximum signal, since the variability in the isotope ratio is also at its' maximum there. Instead, the ions should be sampled from a point below the maximum, where the stability of the ratios will be better.
Godkänd; 2004; 20070128 (ysko)
Los estilos APA, Harvard, Vancouver, ISO, etc.
20

Sandström, Dan. "Solid state nuclear magnetic resonance studies of synthetic mineral surfaces". Doctoral thesis, Luleå tekniska universitet, Industriell miljö- och processteknik, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26480.

Texto completo
Resumen
Solid state 1H, 31P and 27Al Magic Angle Spinning (MAS) Nuclear Magnetic Resonance (NMR) was used in studies of surface species formed on a synthetic fluorapatite in aqueous suspensions at different pH with or without ions or ion complexes of iron or aluminium in the suspension. Different sites related to the PO43- ions at the mineral surface were suggested, POx, POxH and POxH2. Also, three sites formed of Ca2+, H+ and OH- ions at the fluorapatite surface CaOH2+, CaOH and Ca(OH) 2- were suggested. Both single-pulse and cross polarization MAS NMR experiments were used to measure the 1H, 31P and 27Al isotropic chemical shifts. In the 1H to 31P cross polarization experiments the contact time was varied in order to differentiate the resonance liners corresponding to different surface sites from the resonance lines assigned to the PO43- ions in the crystal structure of fluorapatite. In the solid state dipole-dipole recoupling MAS NMR experiments the sequence XY8-DRAMA was used in studies of distances between O,O'- dialkyldithiophosphates adsorbed on synthetic galena (PbS). The sequence was tested experimentally and gave highest double-quantum excitation efficiency of the tested dipole-dipole recoupling sequences tested at the spinning frequency 4.2 kHz. A new sequence IRS-DRAMA was derived analytically and showed high double quantum excitation efficiency in a broad interval of the 31P resonance frequencies at the spinning frequency 2.1 kHz.
Godkänd; 2006; 20061205 (haneit)
Los estilos APA, Harvard, Vancouver, ISO, etc.
21

Fredriksson, Andreas. "Kinetics of collector in-situ adsorption on metal sulphide surfaces studied by ATR-FTIR spectroscopy". Doctoral thesis, Luleå tekniska universitet, Industriell miljö- och processteknik, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26680.

Texto completo
Resumen
In sulphide mineral flotation, a sufficient hydrophobicity of the mineral surfaces is obtained by the adsorption of collector chemicals at the metal sulphide/aqueous interface. This surface alteration is of fundamental and applied interest. In this thesis, attenuated total reflection infrared spectroscopy has been used to monitor the adsorption kinetics and the orientation of heptyl xanthate when adsorbed onto three solid surfaces - germanium, zinc sulphide and lead sulphide in-situ. The Chemical Bath Deposition method has been used to deposit metal sulphides onto germanium internal reflection elements, and verified as capable in synthesizing metal sulphide surfaces for adsorption studies recovering information about surface reactions at metal sulphide/solution interfaces. In the study of surface reactions the substrate is of great importance, implying that the chemistry of the surface has to be well characterised. This work has utilized X-ray photoelectron spectroscopy in the characterisation of the different surfaces. The adsorption kinetics has been followed to monitor the adsorption equilibria at different concentrations. In the case of heptyl xanthate adsorbed at the zinc sulphide/aqueous interface, an adsorption isotherm has been calculated from the equilibrium data. On the assumption that the adsorption step was rate controlling a pseudo-first order equation was derived and adsorption rate data, in all the three studied systems, tested according to this equation. In addition, an orientation study of the heptyl xanthate molecule at the different interfaces was performed, which requires polarised infrared light. Density Functional calculations of a free heptyl xanthate molecule, and a heptyl xanthate molecule adsorbed on a pure Ge(111) were utilized to get more information about the in-situ adsorption of heptyl xanthate on a germanium surface. The important vibration bands were assigned to different vibrations, and the theoretical infrared spectra were compared with the experimentally analyzed spectra. This study shows the strengths of using advanced first-principle Density Functional Theory in the interpretation of real surface adsorption systems.
Godkänd; 2006; 20070314 (evan)
Los estilos APA, Harvard, Vancouver, ISO, etc.
22

Ovrén, Jakob. "Factors affecting the properties and behaviour of blockcopolymer micelles". Thesis, Uppsala universitet, Institutionen för kemi - BMC, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-332970.

Texto completo
Resumen
Polymers are of fundamental importance to our society and can befound in many different products. Block copolymers are polymerswhich are divided up into distinct blocks of two or more differentmonomers. Block copolymers with regions of difference in polarityare capable of self assembling into ordered systems. These systemscan be tailored to be used for different purposes such as templatesfor material synthesis or drug delivery vehicles. The objective ofthis study was to investigate how different methods of preparing asample affect the micellar structures for the systems poly(2-ethylhexyl methacrylate) (PEHMA) - quaternized poly(dimethylaminoethyl methacrylate) (qPDMAEMA) and poly(2-ethyl-hexylmethacrylate) (PEHMA)- poly(methacrylic acid)(PMAA). The parametersstudied were choice of cosolvent and order of mixing, i.e. mixingwater with polymer solution or polymer solution with water. Thestability over time of the micellar structures were studied as wellas the Zetapotential and adsorption to model silica surfaces. Theresults showed that using different cosolvents yielded a differencein size but not in micelle stability over time. The investigationalso showed that preparing the sample by adding polymer solution towater, versus adding water to polymer solution, yielded nosignificant difference in polymer size or stability. However as thestudy was done in small volumes the concentration gradient producedduring the two methods may not differ that much and using largersample volumes may produce different results. Using a triblockcopolymer over a diblock copolymer of a corresponding size yieldedvastly different results in size, stability and adsorption. Thetriblock polymer produced smaller more stable aggregates whichadsorbed quickly and the diblock copolymer produced large,polydisperse aggregates which started to aggregate after around 7days and adsorbed slowly.
Los estilos APA, Harvard, Vancouver, ISO, etc.
23

van, Pelt Thomas. "Thin films of [6,6]-phenyl-C61-butyric acid methyl ester for application in organic solar cells : preparation and effects of exposure to light and heat". Thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-27500.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
24

Trublet, Mylene. "Outline of Titanium (IV) based H2PO4 Ion-exchangers: Kinetics and Sorption models". Licentiate thesis, Luleå tekniska universitet, Kemiteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17322.

Texto completo
Resumen
Decontamination of industrially polluted waters has been enclosed in REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) since 2007, when it entered into force in the European Union, which emphasized the need to search for more effective sorbents. Many studies on inorganic ion-exchangers have been carried out due to the scientific interest towards their high mechanical and thermal stabilities, high resistance to oxidation and high sorption capacity regarding transition and radioactive metal ions. Titanium phosphates (TiP) in particular, have revealed very good cation-exchange properties in relation to different transition metal ions in aqueous solutions. It has been demonstrated that their physicochemical properties as well as their structural characteristics can be altered by carefully choosing the conditions of synthesis: the temperature, acidity, Ti(IV) speciation in solution and reaction time. Since the ‘classical’ crystalline TiP ionites have been divided into two main groups: alfa type; α-TiP [α-Ti(HPO4)2•H2O] and gamma type; γ-TiP [Ti(H2PO4)(PO4)•H2O] with different functional groups (–H2PO4, –HPO4 and –PO4) present, the researchers have focused on synthesis of various metastable TiP with different functional properties. In this work, three different synthetic routes for TiP ion-exchangers were explored in order to obtain a sorbent composed solely of –H2PO4 exchange units. The ─H2PO4 groups were expected to considerably increase the pH working range of the sorbents and to nearly double the theoretical exchange capacity of TiP ion-exchangers containing mostly –HPO4 functional groups. Among the synthesized ion-exchangers (TiP1, TiP2 and TiP3), TiP1 has shown very good sorption characteristics and therefore, most of the studies were performed on it. TiP1 was synthesized at mild thermal conditions using cobalt(II) ions as a modifying agent and HCl-washes as post-synthetic treatments. This sorbent was characterized by different spectroscopic techniques and its chemical formula was established to be: TiO(OH)(H2PO4)•H2O. The sorption capacity of TiP1, estimated about 4.8 meq.g-1, is higher than the reported exchange capacity for various amorphous TiP. The sorption characteristics of TiP1 towards divalent ions such as Cu2+, Zn2+, Ni2+, Mn2+ and Co2+, were investigated in this work. The results of the sorption experiments (in the 1-20 mmol.L-1 range) were fitted to the Langmuir and Temkin models with the latter one being somewhat preferred for most of the metal ions studied. This indicates that interactions between adsorbed molecules cannot be neglected. It was also found that the kinetics of the ion-exchange process was very fast and the equilibrium was reached within 10 minutes. The kinetic data were modeled using the pseudo-second order reaction rate and the obtained curves were consistent with chemisorption being the rate limiting step of the reactions. The selectivity order of the metal ions studied towards TiP1 here was found to be: Cu2+ > Zn2+ > Mn2+ > Co2+ > Ni2+. The TiP1 sorbent has also shown to be a very good cation-exchanger when batch experiments were performed using heavy metals polluted waters from closed mines, supplied by Boliden AB. These studies delineated that TiP1 has displayed exclusive sorption capacities and imminent ion-exchange kinetics. It has been distinctly shown that a modest change in the synthesis could facilitate the fabrication of titanium phosphate ion-exchangers with improved and versatile sorption properties.
Godkänd; 2015; 20151102 (myltru); Nedanstående person kommer att hålla licentiatseminarium för avläggande av teknologie licentiatexamen. Namn: Myléne Trublet Ämne: Gränsytors kemi/Chemistry of Interfaces Uppsats: Outline of Titanium (IV) based H2PO4 Ion-exchangers: Kinetics and Sorption models Examinator: Professor Oleg Antzutkin, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet Diskutant: Professor Ingmar Persson, Kemi och bioteknologi, Uppsala Tid: Torsdag 10 december 2015 kl 13.00 Plats: F341, Luleå tekniska universitet
Los estilos APA, Harvard, Vancouver, ISO, etc.
25

Filippov, Andrei. "Self-Diffusion and Microstructure of Some Ionic Liquids in Bulk and in Confinement". Doctoral thesis, Luleå tekniska universitet, Kemiteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18055.

Texto completo
Resumen
An ionic liquid (IL) is a salt, which usually is in the liquid state at normal temperature and pressure. The properties of ILs can be adjusted for various processes and applications by choosing different combinations of ions. Similar to other salts, ILs contain only ions with positive (cations) and negative (anions) charges in equal proportions. However, to prevent solidification, ions in ionic liquids usually contain bulky organic chemical groups, which, apart from electrostatic interactions, promote other types of interactions between ions, such as: (i) van-der-Waals interactions; (ii) hydrogen bonding; (iii) - stacking, etc., depending on the particular chemical structure of the ions. All these interactions, in combination, may lead to formation of specific microstructures in ILs, which may vary with temperature caused by changing thermal rotational and translational energies of the ions. Ions in these microstructures may have preferential orientations relative to each other, maintain anisotropic properties similar to those in liquid crystals or, in some specific cases, may even separate into microscopically organised liquid phases. Therefore, the dynamics of ILs may also be dependent on their microstructure. In many practical applications ionic liquids are placed on surfaces or in confinements. Solid surfaces introduce extra forces, which may be specific to the charge of the ions or/and to functional groups in the ILs. The geometry and interactions of ions in confinements or/and pores of materials may also disrupt specific bulk microstructures of ILs. Both confinement effects and interactions of ions with surfaces are manifested in the translational dynamics of the ions. One of the most direct and informative methods to study translational dynamics of ILs is pulse-field-gradient nuclear magnetic resonance (PFG-NMR).In this thesis the results of PFG-NMR studies on a few classes of ILs are reported: (i) the historically “standard” (since Walden’s discovery in 1914) ionic liquid, the ethylammonium nitrate (EAN) and (ii) halogen-free orthoborate-based phosphonium, imidazolium and pyrrolidinium ILs with varied structure and lengths of alkyl chains in cations, and varied structures of orthoborate anions. These ILs were studied in bulk at different temperatures, and also in confinements, such as between parallel glass and Teflon plates and in mesoporous Vycor glass. It was found that diffusion coefficients of cations and anions in EAN, phosphonium and pyrrolidinium orthoborate ILs in bulk are different, but according to the standard Stocks-Einstein model, they correspond to diffusion of ions in homogeneous liquids. A change in the chemical structure of one of the ions results in a change in both the diffusion coefficient of the oppositely charged ion and the activation energy of diffusion for both ions in an IL. Similar effects were observed from the chemical shifts and diffusion coefficients measured by NMR for imidazolium orthoborate ILs dissolved in polyethylene glycol solutions, in which imidazolium cations strongly interact with PEG molecules, further affecting the diffusion of orthoborate anions via electrostatic interactions. A liquid-liquid phase separation was suggested for a few phosphonium and pyrrolidinium bis(mandelato)borate ILs, in which a divergence of diffusion coefficients and activation energies of diffusion for cations and anions was detected at temperatures below ca 50 °C. In addition, a free-volume theory was invoked to explain the dependences of density of ILs on the alkyl chain length in cations.It was also found that for a phosphonium bis(salicylato)borate IL confined in 4 nm mesoporous Vycor glass the diffusion coefficients of ions increase by a factor of 35! This phenomenon was explained by the dynamic heterogeneity of this IL in micropores and empty voids of the Vycor glass. For EAN IL in confinements between glass and Teflon plates, the diffusion of ethylammonium cations and nitrate anions is significantly anisotropic, i.e. slower in the direction of the normal to the plates and faster along the plates compared to diffusion of the ions in bulk. A plausible explanation of this PFG NMR data is that EAN forms layers near polar and non-polar solid surfaces. A similar phenomenon, to a lesser extent, was also observed for phosphonium cations of bis(mandelato)borate, bis(salicylato)borate and bis(oxalato)borate confined between glass plates. The results of these studies may have implications in modeling tribological performance, i.e., friction and wear reduction for contact pairs of different materials lubricated by various classes of ionic liquids.
För godkännande; 2016; 20160420 (andfil)
Los estilos APA, Harvard, Vancouver, ISO, etc.
26

Österlund, Nicklas. "Gas phase studies of the Amyloid-β peptide : Peptide oligomerization and interactions with membrane mimetics". Thesis, Stockholms universitet, Institutionen för biokemi och biofysik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-155009.

Texto completo
Resumen
The amyloid-β peptide is an amphiphilic peptide that exhibits self-aggregating properties, forming the amyloid fibrils that can be found in the brains of Alzheimer patients. Today it is believed that it is the soluble Aβ oligomers rather than the mature fibrils that are the main neurotoxic species. These small peptide assemblies are known to associate with lipid membranes and form pores that can transport Ca2+ into the cell, which in part could be responsible for their neurotoxic properties. However, most biophysical methods that have been developed to study Aβ target either the monomer or the mature fibrils, and not the low abundance and polydisperse oligomers. In this work, a soft ionization mass spectrometry method that retains non-covalent oligomer interactions in the gas phase has been developed. Using this method, monomeric and oligomeric Aβ (1-40) from dimers up to octamers, except heptamers, were detected in vitro. It was also possible to detect and study the effects of peptide modifications such as methionine-35 oxidation. As mass spectrometry is a non-averaging technique the aggregation kinetics for reduced and oxidized peptides are followed simultaneously, and the results showed that the oxidized form of Aβ(1-40) aggregates slower and forms lower amounts of soluble oligomers than the reduced form. Additionally, Aβ(1-40) interactions with zwitterionic SB3-14 detergent micelles were studied in the gas phase, and it was demonstrated that Aβ-micelle complexes can survive in the mass spectrometer and be identified. Detergent head group charges seem to be essential for peptide-micelle interaction, both in the gas phase and in solution as no structure induction is observed upon addition of the non-ionic detergent DDM. Overall gas phase and solution properties agree well, which is encouraging for future gas phase studies of Aβ interactions with membrane mimetics.
Los estilos APA, Harvard, Vancouver, ISO, etc.
27

Zhou, Xiangzhi. "An Analysis of NMRD profiles and ESR lineshapes of MRI Contrast Agents". Doctoral thesis, Umeå : Univ, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-361.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
28

Engdahl, John Gustav. "Skolresultat och fysisk aktivitet : Hur rörelsevanor speglar elevers resultat inom matematik". Thesis, Linnéuniversitetet, Institutionen för pedagogik, psykologi och idrottsvetenskap, PPI, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-12694.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
29

Kostela, Johan. "Electrochemical Studies of Redox Properties and Diffusion in Self-Assembled Systems". Doctoral thesis, Uppsala University, Department of Physical Chemistry, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-4613.

Texto completo
Resumen

In this thesis electron transfer reactions and diffusion of redox molecules in three different types of self-aggregated structures are investigated. Electrochemistry was used to investigate the redox potential and diffusion coefficients for redox active molecules with different polarity. The first aggregate system studied was the micellar phase. The role of electrostatic interactions in the stability of an amphiphilic viologen was investigated for differently charged micelles. It was concluded that the electrostatic environment changed the redox potential of the viologen. In differently charged micelles the redox potential was more negative compared to when the viologen was situated in micelles with the same charge.

The second structure investigated is a very fascinating phase, the bicontinuous cubic phase, with its continuous channels of water and an apolar bilayer. Its domains with different polarity made it possible to solvate both hydrophilic and hydrophobic molecules. An amphiphilic molecule will have its head-group at the interface between the apolar and polar part, and can move lateral within the bilayer. All molecules investigated made contact with and reacted at the surface of the electrode. The diffusion of water bound species diffusing in the water channels was 3-4 times slower than in water. Hydrophobic and amphiphilic molecules were much more hindered, probably because the cubic phase was not defect free.

The third kind of structure studied was a lamellar system. This phase is built up from planar bilayers that are stacked with a repeating distance and with water in between. A hydrophilic molecule was severely hindered to move in the direction perpendicular to the bilayer plane. Upon addition of the peptide melittin the current increased, due to pore formation in the bilayer.

Los estilos APA, Harvard, Vancouver, ISO, etc.
30

Karlsson, Maria. "Quantum Chemical Investigations of Phenol and Larger Aromatic Molecules on TiO2 Surface". Thesis, Linköping University, The Department of Physics, Chemistry and Biology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2715.

Texto completo
Resumen

Adsorption of organic molecules at a surface of titanium dioxide (101) anatase is studied using quantum-chemical density functional theory. Anatase can be used in solar cells. For the clean anatase surface the band gap is so large that only UV-light can excite electrons. Different groups with conjugated systems are attached to obtain a more suitable band gap.

Phenol was attached in different positions to a cluster of anatase and geometry optimized using the B3LYP-functional. The geometry that was energetically most favorable was used to put in phenylmethanol, phenylethanol, naphthol, 2-phenanthrol, 1-pyrol and 2-perylol. To give a more realistic model of phenol at anatase, a study of a two- dimensional periodic anatase surface was also made.

Molecular orbitals were calculated to study the overlap between HOMO and LUMO orbitals. The calculation shows that phenol will remain as a molecule and will not dissociate. The band gap gets smaller when molecules are attached at the cluster and with 2-perylol it reaches the energy of visible light.

The molecular orbitals for HOMO, LUMO and LUMO of the adsorbed molecule were investigated. HOMO was localized at the molecule, LUMO at the cluster and LUMO of the adsorbed molecule move closer to the energy of LUMO when the number of rings increases.

Los estilos APA, Harvard, Vancouver, ISO, etc.
31

Maninnerby, Lina. "Barnböcker med vatten som tema : En innehållsanalys utifrån ett kemi-och fysikperspektiv". Thesis, Karlstads universitet, Institutionen för pedagogiska studier (from 2013), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-71310.

Texto completo
Resumen
In this study, 10 children’s books with water as a theme, for 1-6-year-olds have been reviewed through a content analysis, to get knowledge of how chemistry and physics are anchored and used in the books text. The results of the analysis showed a very weak use of science concepts while more everyday-words linked to water were used frequently. During the analysis, some texts in the books were considered, to be able to implement science concepts without disturbing the text flow. Why it seemed to have been avoided can possibly be linked to the different language usage and the society’s relationship to these.
Los estilos APA, Harvard, Vancouver, ISO, etc.
32

Wallin, Staffan. "The Fate of Electronically Excited States : Ultrafast Electron and Energy Transfer in Solvated Donor-Acceptor Systems". Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis (AUU) : Universitetsbiblioteket [distributör], 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-6135.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
33

Hjelm, Johan. "Conducting Polymers Containing In-Chain Metal Centres : Electropolymerisation and Charge Transport". Doctoral thesis, Uppsala University, Department of Physical Chemistry, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3789.

Texto completo
Resumen

Conjugated polymers that exhibit high electronic conductivities play key roles in the emerging field of molecular electronics. In particular, linking metal centres with useful electrochemical, photophysical, or catalytic properties to the backbone, or within the polymer chain itself, is a topic which has attracted a significant amount of interest lately. Structurally rigid monomers that can be electropolymerised to form highly conducting molecular wires may provide new insights into conduction mechanisms, e.g., exploiting resonant superexchange (electron-hopping) by tuning the energies of redox centre and bridge states. The focus of this thesis lies on the electrochemical investigation of preparation, growth dynamics, and charge transport dynamics of oligothiophene/transition metal hybrid materials. The incorporation of ruthenium(II) and osmium(II) terpyridine complexes into such polymeric assemblies was accomplished by an electropolymerisation procedure, to produce rod-like oligothienyl-bridged metallopolymers. The properties of the monomers used were characterised by optical spectroscopy and electrochemical techniques. Charge transport was studied in detail for some of the materials created, and it was found that the electron transport rate and dc conductivity was enhanced by up to two orders of magnitude compared to relevant non-conjugated polymers, demonstrating the usefulness of this approach for optimization of charge transport in metallopolymers. The charge transport diffusion coefficent was determined to (2.6 ± 0.5) x 10-6 cm2 s-1 for a quaterthienyl-bridged {Os(tpy)2} polymer by use of an electrochemical steady-state method carried out using a transistor-like experimental geometry. It was found that charge transport in these materials is concentration-gradient driven. The rate limiting step of the charge transport process was investigated using electrochemical impedance spectroscopy. The electropolymerisation dynamics of one of the monomers was studied using microelectrodes, and the results obtained shows that electropolymerisation is highly efficient, and indicate that mass transport controls this process. Through a combination of controlled potential deposition and SEM imaging it was demonstrated that it is possible to exploit the edge effect of microelectrodes to promote film growth in a direction co-planar with the electrode surface.

Los estilos APA, Harvard, Vancouver, ISO, etc.
34

Greijer, Agrell Helena. "Interactions in Dye-sensitized Solar Cells". Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3752.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
35

Jarlbring, Mathias. "Characterisation and surface reactions of iron oxides and fluorapatite in aqueous suspensions". Licentiate thesis, Luleå, 2004. http://epubl.luth.se/1402-1757/2004/02.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
36

Bengtsson, Katarina. "Additive manufacturing methods and materials for electrokinetic systems". Licentiate thesis, Linköpings universitet, Ytors Fysik och Kemi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-121252.

Texto completo
Resumen
Fabrication of miniaturized devices is usually time-consuming, costly, and the materials commonly used limit the structures that are possible to create. The techniques most often used to make microsystems involve multiple steps, where each step takes considerable time, and if only a few systems are to be made, the price per device becomes excessive. This thesis describes how a simple syringebased 3D-printer, in combination with an appropriate choice of materials, can reduce the delay between design and prototype and simplify fabrication of microsystems. This thesis suggest two types of materials that we propose be used in combination with 3D-printing to further develop microsystems for biology and biochemistry. Analytical applications in biology and biochemistry often contain electrodes, such as in gel electrophoresis. Faradaic (electrochemical) reactions have to occur at the metal electrodes to allow electron-to-ion transduction through an electrolyte-based system to drive a current when a potential is applied to the electrodes in an electrolyte-based system. These electrochemical reactions at the electrodes, such as water electrolysis, are usually problematic when miniaturizing devices and analytical systems. An alternative to metal electrodes can be electrochemicallyactive conducting polymers, e.g. poly(3,4-ethylenedioxythiophene) (PEDOT), which can be used to reduce electrolysis when driving a current through water-based systems. Paper 1 describes gel electrophoresis where the platinum electrodes were replaced with the conductive polymer PEDOT, without affecting the separation. Manufacturing and prototyping of microsystems can be simplified by using 3Dprinting in combination with a sacrificial material. A sacrificial template material can further simplify bottom-up manufacturing of more complicated forms such as protruding and overhanging structures. We showed in paper 2 that polyethylene glycol (PEG), in combination with a carbonate-based plasticizer, functions well as a 3D-printable sacrificial template material. PEG2000 with between 20 wt% and 30 wt% ethylene carbonate or propylene carbonate has properties advantageous for 3D-printing, such as shear-thinning rheology, mechanical and chemical stability, and easy dissolution in water.

In the printed version the thesis number 1720 on the cover is incorrect. The correct thesis number is 1724 which is corrected in the electronic version.

Los estilos APA, Harvard, Vancouver, ISO, etc.
37

Meshkian, Rahele. "Synthesis and characterization of Mo-based nanolaminates". Licentiate thesis, Linköpings universitet, Tunnfilmsfysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-121262.

Texto completo
Resumen
Mn+1AXn (MAX) phases are nanolaminated compounds based on a transition metal (M), a group A element (A), and carbon or/and nitrogen (X), which exhibit a unique combination of ceramic and metallic properties. Mo-based MAX phases are among the least studied, despite indication of superconducting properties and high potential for fabrication of the grapheneanalogous 2D counterpart, Mo2C MXene. Furthermore, incorporation of Mn atoms in these MAX phases may induce a magnetic response. In this work, I have performed theoretical calculations focused on evaluation of phase stability of the Mon+1GaCn MAX phases, and have synthesized the predicted stable Mo2GaC in thin film form using magnetron sputtering. Close to phase pure epitaxial films were grown at ~590 ºC, and electrical resistivity measurements using a four point probe technique suggest a superconducting behavior with a critical temperature of ~7 K. The A-layer in the MAX phase can be selectively etched using different types of acids, leading to exfoliation of the MX-layers and realization of MXenes. After synthesis of the MAX phase related material Mo2Ga2C, the previously non-explored Mo2C MXene could be fabricated from etching Mo2Ga2C thin films in 50% hydrofluoric acid at a temperature of ~50 ºC for a duration of ~3 h. Motivated by the realization of laminated Mo-based materials in 3D as well as 2D, I set out to explore the magnetic properties resulting from Mn-alloying of the non-magnetic Mo2GaC phase. For that purpose, (Mo,Mn)2GaC was synthesized using a DC magnetron sputtering system with Ga and C as elemental targets and a 1:1 atomic ratio Mo:Mn compound target. Heteroepitaxial films on MgO(111) substrates were grown at ~530 ºC, as confirmed by X-ray diffraction. Compositional analysis using energy dispersive X-ray spectroscopy showed a 2:1 ratio of the M and A elements and a 1:1 ratio for the Mo and Mn atoms in the film. Vibrating sample magnetometry was utilized in order to measure the magnetic behavior of the films, showing a magnetic response up to at least 300 K, and with a coercive field of 0.06 T, which is the highest reported for any MAX phase to date.

The series name Linköping Studies in Science and Technology Licentiate Thesis is incorrect. The correct series name is Linköping Studies in Science and Technology Thesis.

Los estilos APA, Harvard, Vancouver, ISO, etc.
38

Safi, Ismael. "Radiation Effects on KBS-3 Barriers: SKB’s work so far". Thesis, KTH, Skolan för kemivetenskap (CHE), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-221172.

Texto completo
Resumen
In the Swedish concept for final disposal of spent nuclear fuel, referred to as KBS-3, a three-layered protection system is used. The system consists of a copper canister holding the spent nuclear fuel deposited 500 meters in a repository built in groundwater saturated granitic rock. The copper canisters are placed in deposition holes, buffered and backfilled by bentonite clay. One of the challenges associated with this system is the long-term exposure of the engineered barriers i.e. the canister including the spent fuel and the cast iron insert as well as the bentonite buffer to ionizing radiation. The possible effects of radiation on the materials in the engineered barriers have been studied not only by the Swedish Nuclear Fuel and Waste Co (SKB), but also by academia nationally and internationally. In this work, literature studies have been carried out to investigate whether all possible/potential effects of ionizing radiation from the spent nuclear fuel on the engineered barriers have been considered by SKB. Apart from a general summary of the relevant issues in chapter one, regions within the KBS-3 design where enhanced radiation may occur have been identified and the related radiation induced processes have been summarized in chapter two. These issues include effects of water-radiolysis on the spent fuel, the cast-iron insert and other ferrous materials, the copper shell and the bentonite buffer. Three types of possible damages have been identified: the microstructural defects in the ferrous materials by direct radiation, the radiation-induced microstructural alterations of the spent fuel and the bentonite and radiation-induced oxidation i.e. dissolution of the fuel and corrosion of the ferrous metals and the copper. The relevant SKB documents have been identified (in chapter 3) to be the SR-Site main report, the underlying Process reports and reports of FUD-programs. Apart from these documents, other SKB technical reports and open literature are used as basis for assessing whether all the issues mentioned in chapter two of this study have been considered by SKB.  According to the assessment, most of the significant issues mentioned in chapter two have been mentioned and discussed in the identified SKB documents. In the main safety assessment, i.e. the SR-Site project, the significance of most of the radiation processes has been based on dose levels expected at the different regions within the KBS-3 design. Irrespective of the assessments in SR-Site though, the current understanding of the relevant issues and plans for future research efforts summarized in FUD-programs reflect the research developments. However, the recent developments in understanding of radiation-induced effects on montmorillonite and the corrosion of copper in argon atmosphere need to be given due importance in coming FUD-programs. A separate investigation of radiation effects on FSW-joints may contribute to removal of the remaining uncertainties. In addition, mechanism involved in radiation-induced fuel dissolution and copper corrosion may require more research efforts than those planned.
Det svenska konceptet för slutförvar av använt kärnbränsle, KBS-3, består av tre barriärer som är tänkt att skydda omgivningen mot joniserande strålning från använt kärnbränsle. Systemet består av specialtillverkade kopparkapslar som innehåller det använda kärnbränslet. Kapslarna förvaras i deponeringshål 500 meter ner i berggrunden och är inneslutna i bentonitlera. En av frågeställningarna associerade med djupt geologiskt förvar av kärnbränsle är hur de konstruerade barriärna, alltså kopparhöljen som omsluter gjutjärninsatsen och det använda kärnbränslet samt bentonitleran, kan påverkas av joniserande strålning från det använda kärnbränslet. Möjliga strålningseffekter på de skyddande barriärna har studerats nationellt och internationellt. Syftet med denna studie var att utvärdera huruvida SKB har i sina säkerhetsanalyser av slutförvaret tagit tillräcklig hänsyn till effekter av joniserande strålning på de konstruerade barriärna. Studien består av tre kapitel där kapitel 1 utgör en generell sammanfattning av frågeställningar kopplade till KBS-3 barriärer. I kapitel 2 har områden i och omkring de konstruerade barriärna där joniserande strålning från använt kärnbränsle kan förekomma identifierats och möjliga strålningsinducerade processer i dessa områden sammanfattats. Tre typer av möjliga strålningsinducerade skador har identifierats: 1) strålningsinducerade mikrostrukturella defekter i metaller som förekommer i systemet, 2) strålningsinducerade mikrostrukturella förändringar i använt kärnbränsle och i bentonitleran samt 3) strålningsinducerad oxidation, dvs. upplösning av det använda kärnbränslet och korrosion av metaller som förekommer i systemet. SKB-dokumenten som identifierats (i kapital 3) som relevanta för utvärderingen i denna studie är följande: Säkerhetsanalysen (SR-Site), tekniska rapporter som ligger till grund för SR-Site och FUD-programmen. Enligt bedömningen i denna studie har SKB tagit hänsyn till de flesta relevanta frågeställningarna kopplade till strålningsinducerade effekterna på de konstruerade barriärna. I SR-Site har de flesta bedömningar relaterade till och om signifikansen hos de strålningsinducerade processerna baserats på doser och dosrater som förväntas förekomma i och omkring de konstruerade barriärna. Oavsett bedömningarna i SR-Site har dock de mest relevanta frågeställningarna tagits upp i FUD-programmen och framtida forskningsinsatser i enlighet med det som av SKB har uttryckts som behov av en utökad processförståelse. Dessa frågeställningar reflekterar väl de mest signifikanta utvecklingarna som rapporterats i öppna vetenskapliga studier om strålningsinducerade processer som kan förekomma i ett djupt geologiskt förvar för använt kärnbränsle. De senaste rapporterade observationerna om strålningseffekter på montmorillonit och kopperkorrosion i argonatmosfär måste dock tas upp och diskuteras i de kommande FUD-programmen. Separata studier av strålningseffekter på koppardelar som har behandlats med FSW-teknik rekommenderas. För att uppnå en bättre och djupare förståelse för de förekommande mekanismerna i strålningsinducerad upplösning av använt kärnbränsle krävs sannolikt mera forskningsinsatser än de planerade.
Los estilos APA, Harvard, Vancouver, ISO, etc.
39

Åman, Ken. "Water Relaxation Processes as Seen by NMR Spectroscopy Using MD and BD Simulations". Doctoral thesis, Umeå University, Chemistry, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-394.

Texto completo
Resumen

This thesis describes water proton and deuterium relaxation processes, as seen by Nuclear Magnetic Resonance (NMR) spectroscopy, using Brownian Dynamics (BD) or Molecular Dynamics (MD) simulations. The MD simulations reveal new detailed information about the dynamics and order of water molecules outside of a lipid bilayer. This is very important information in order to fully understand deuterium NMR measurements in lipid bilayer systems, which require an advanced analysis, because of the complicated water motion (such as tumbling and self-diffusion). The BD simulation methods are combined with the powerful Stochastic Liouville Equation (SLE) in its Langevin form (SLEL) to give new insight into both 1H2O and 2H2O relaxation. The new simulation techniques which combine BD and SLEL can give important new information in cases where other methods do not apply. The deuterium relaxation is described in the context of a water/lipid interface and is in a very elegant way combined with the simulation of diffusion on curved surfaces developed by our research group. 1H2O spin-lattice relaxation is described for paramagneticsystems. With this we mean systems with paramagnetic transition metal ions or complexes, that are dissolved into a water solvent. The theoretical description of such systems are quite well investigated but such systems are not yet fully understood. An important consequence of the Paramagnetic Relaxation Enhancement (PRE) calculations when using the SLEL approach combined with BD simulations is that we obtain the electron correlation functions, which describe the relaxation of the paramagnetic electron spins. This means for example that it is also straight forward to generate Electron Spin Resonance (ESR) lineshapes.

Los estilos APA, Harvard, Vancouver, ISO, etc.
40

Håkansson, Pär. "Simulation of Relaxation Processes in Fluorescence, EPR and NMR Spectroscopy". Doctoral thesis, Umeå universitet, Kemi, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-244.

Texto completo
Resumen
Relaxation models are developed using numerical solutions of the Stochastic Liouville Equation of motion. Simplified descriptions such as the stochastic master equation is described in the context of fluorescence depolarisation experiments. Redfield theory is used in order to describe NMR relaxation in bicontinuous phases. The stochastic fluctuations in the relaxation models are accounted for using Brownian Dynamics simulation technique. A novel approach to quantitatively analyse fluorescence depolarisation experiments and to determine intramolecular distances is presented. A new Brownian Dynamics simulation technique is developed in order to characterize translational diffusion along the water lipid interface of bicontinuous cubic phases.
Los estilos APA, Harvard, Vancouver, ISO, etc.
41

Borgström, Magnus. "Controlling Charge and Energy Transfer Processes in Artificial Photosynthesis : From Picosecond to Millisecond Dynamics". Doctoral thesis, Uppsala University, Department of Physical Chemistry, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-6017.

Texto completo
Resumen

This thesis describes an interdisciplinary project, where the aim is to mimic the initial reactions in photosynthesis. In photosynthesis, the absorption of light is followed by the formation of charge-separated states. The energy stored in these charge-separated states is further used for the oxidation of water and reduction of carbon dioxide. In this thesis the photo-induced processes in a range of supramolecular complexes have been investigated with time resolved spectroscopic techniques. The complexes studied consist of three types of units; photosensitizers (P) capable of absorbing light, electron acceptors (A) that are easily reduced and electron donors (D) that are easily oxidised. Our results are important for the future design of artificial photosystems, where the goal is to produce hydrogen from light and water.

Two molecular triads with a D-P-A architecture are presented. In the first one, a photo-induced charge-separated state was formed in an unusually high yield (φ>90%). In the second triad, photo-irradiation led to the formation of an extremely long-lived charge-separated state (τ = 500 ms at 140K). This is also the first synthetically made triad containing a dinuclear manganese unit as electron donor.

Further, two sets of P-A dyads are presented. In both, the expected photo-induced reduction of the electron acceptor is diminished due to competing energy transfer to the triplet state of the acceptor.

Finally, a P-P-A complex containing two separate photosensitizers is described. The idea is to produce high-energy charge-separated states by using the energy from two photons.

Los estilos APA, Harvard, Vancouver, ISO, etc.
42

Wessman, Per. "Physico-Chemical Investigations of, and Characterization of Model Membranes for, Lipid-Peptide Interactions". Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-89432.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
43

Magendran, Cagenna Linne, Felicia Karlahag, Amanda Hamrin y Madeleine Lövås. "Gas Chromatography-Mass Spectrometry of Volatile Organic Compounds from four Species of Grass Extracts from known Oviposition sites for Malaria Vectors". Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-277107.

Texto completo
Resumen
Tidigare studier har visat att äggläggande malariavektorer attraheras till vissa flyktiga organiska ämnen (VOC) som finns i olika gräsarter. Syftet med den här studien var att verifiera att flyktiga organiska ämnen finns i fyra olika gräsarter från Kenya; Panicum repens,Cynodon dactylon och Cyperus papyrus med Pennisetum setaceum rubrum som kontroll förde andra gräsarterna. För att analysera de flyktiga organiska ämnena extraherades gräset medhjälp av ultraljudsextraktion (UAE) och fastfasextraktion (SPE). De flyktiga organiska ämnena analyserades med gaskromatografi- masspektrometri (GC-MS). På grund av utbrottet av COVID-19 så analyserades istället resultat från en tidigare studie som använde samma metod. Det visades att Cyperus rotundus innehöll flera olika terpener och det antogs att Cyperus papyrus också innehåller några av dess föreningar. Det drogs också slutsatsen attbåde UAE och SPE ska användas för att ge bästa resultat med avseende på mängden analytersom extraherats. Fortsättningsvis så drogs slutsatsen att då UAE ska användas så är acetonitril att föredra över metanol som lösningsmedel. Den här studien är en översikt av den tidigare nämnda metodiken.
Los estilos APA, Harvard, Vancouver, ISO, etc.
44

Guo, Meiyuan. "Electronic structure investigations of transition metal complexes through X-ray spectroscopy". Doctoral thesis, Uppsala universitet, Teoretisk kemi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-328072.

Texto completo
Resumen
Catalysts based on the first-row (3d) transition metals are commonly seen in chemical and biological reactions. To understand the role of the transition metal in the catalyst, the element specific technique core level spectroscopy is used to probe the electronic structure and geometric properties centered around the metal site. Different types of X-ray spectra can be applied to probe the metal 3d character orbitals involved in reactions, which make it possible to identify and characterize the reactive sites of samples in different forms. A detailed interpretation and understanding of the different X-ray spectra requires a unified method which can be used to model different types of X-ray spectra, e.g., soft and hard X-rays. In this thesis, theoretical investigations of the electronic structures of 3d transition metal complexes through X-ray spectroscopy are presented. The restricted active space method (RAS) is used to successfully reproduce different types of X-ray spectra by including all important spectral effects: multiplet structures, spin-orbit coupling, charge-transfer excitations, ligand field splitting and 3d-4p orbital hybridization. Different prototypes of molecules are adopted to test the applicability of the RAS theory. The metal L edge X-ray absorption (XAS) spectra of low spin complexes [Fe(CN)6]n and [Fe(P)(ImH)2]n in ferrous and ferric oxidation state are discussed. The RAS calculations on iron L edge spectra of these comparing complexes have been performed to fingerprint the oxidation states of metal ion, and different ligand environments. The Fe(P) system has several low-lying spin states in the ground state, which is used as a model to identify unknown species by their spectroscopic fingerprints through RAS spectra simulations. To pave the route of understanding the electronic structure of oxygen evolution complex of Mn4CaO5 cluster, the MnII(acac)2 and MnIII(acac)3 are adopted as prototypical Mn-complexes. The 3d partial fluorescence yield-XAS are employed on the Mn L-edge in solution. Combining experiments and RAS calculations, primary questions related to the oxidation state and spin state are discussed. The first application to simulate the metal K pre-edge XAS of mono-iron complexes and iron dimer using RAS method beyond the electric dipole is completed by implementing the approximate origin independent calculations for the intensities. The K pre-edge spectrum of centrosymmetric complex [FeCl6]n– ferrous state is discussed as s and a donor model systems. The intensity of the K pre-edge increases significantly if the centrosymmetric environment is broken, e:g:, when going from a six-coordinate to the four-coordinate site in [FeCl4]n. Distortions from centrosymmetry allow for 3d-4p orbital hybridization, which gives rise to electric dipole-allowed transitions in the K pre-edge region. In order to deliver ample electronic structure details with high resolution in the hard X-ray energy range, the two-photon 1s2p resonant inelastic X-ray scattering process is employed. Upon the above successful applications of one-photon iron L edge and K pre-edge spectra, the RAS method is extended to simulate and interpret the 1s2p resonant inelastic X-ray scattering spectra of [Fe(CN)6]n in ferrous and ferric oxidation states. The RAS applications on X-ray simulations are not restricted to the presented spectra in the thesis, it can be applied to the photon process of interest by including the corresponding core and valence orbitals of the sample.
Los estilos APA, Harvard, Vancouver, ISO, etc.
45

Kadi, Mari. "Bilayers with Surfactant-induced Pores and Demixing in Micelles : Studies of Segregation in Amphiphile Systems". Doctoral thesis, Uppsala University, Department of Physical Chemistry, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3565.

Texto completo
Resumen

The focus of this thesis has been on the effects of segregation in mixtures of amphiphilic molecules. Two different systems were investigated: fluorocarbon-hydrocarbon surfactant mixtures and lipid-surfactant mixtures.

In fluorocarbon-hydrocarbon surfactant mixtures the repulsive interactions between the chains can lead to a demixing into different types of coexisting micelles, fluorocarbon rich and hydrocarbon rich. From NMR self-diffusion measurements such a demixing was found to occur in the mixture of the partially fluorinated surfactant HFDePC and C16TAC. We furthermore suggested a demixing also within the micelles to explain 19F-NMR line width data and results from neutron scattering.

In lipid-surfactant mixtures, a segregation of the molecules may instead be caused by a difference in the preferred curvature of the lipid and the surfactant residing within the same aggregate. Using a surfactant selective electrode, binding isoterms of four different cationic surfactants (C12TAC, C14TAC, C16TAC and HFDePC) to preformed lipid (GMO) vesicles were determined. Perforated vesicles were observed by cryo-TEM in the mixture with C16TAC. To explain the results from the binding isoterms, the formation of pores in the bilayer was regarded as a cooperative process, similar to micelle formation. The surfactant accumulates at the edges of the pores, and increasing the surfactant concentration results in an increased number of pores with a constant surfactant/lipid ratio at the edges.

The lipid-surfactant mixtures were also studied at the solid/solution interface using AFM. An adsorbed mesh structure, a counterpart to the bulk perforated lamellar phase, was observed for the first time.

Los estilos APA, Harvard, Vancouver, ISO, etc.
46

Bergstrand, Nill. "Liposomes for Drug Delivery : from Physico-chemical Studies to Applications". Doctoral thesis, Uppsala University, Department of Physical Chemistry, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3390.

Texto completo
Resumen

Physico-chemical characterisation of structure and stability of liposomes intended for drug delivery is the central issue in this thesis. In addition, targeted liposomes to be used in boron neutron capture therapy (BNCT) were developed.

Lysolipids and fatty acids are products formed upon hydrolysis of PC-lipids. The aggregate structure formed upon mixing lysolipids, fatty acids and EPC were characterised by means of cryo-TEM. A relatively monodisperse population of unilamellar liposomes was detected in mixtures containing equimolar concentration of the three components.

The interactions between alternative steric stabilisers (PEO-PPO-PEO copolymers) and conventional PC-and pH-sensitive PE-liposomes were investigated. Whereas the PE-liposomes could be stabilised by the PEO-PPO-PEO copolymers, the PC-liposomes showed an enhanced permeability concomitant with the PEO-PPO-PEO adsorption.

Permeability effects induced by different PEG-stabilisers on EPC liposomes were shown to be dependent on the length of the PEG chain but also on the linkage used to connect the PEG polymer with the hydrophobic membrane anchor.

An efficient drug delivery requires, in most cases, an accumulation of the drug in the cell cytoplasm. The mechanism behind cytosolic drug delivery from pH-sensitive liposomes was investigated. The results suggest that a destabilisation of the endosome membrane, due to an incorporation of non-lamellar forming lipids, may allow the drug to be released.

Furthermore, sterically stabilised liposomes intended for targeted BNCT have been characterised and optimised concerning loading and retention of boronated drugs.

Los estilos APA, Harvard, Vancouver, ISO, etc.
47

Liu, Yuan. "Theoretical Studies of Natural Gas Hydrates and H-bonded Clusters and Crystals". Doctoral thesis, Linköpings universitet, Kemi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-132428.

Texto completo
Resumen
In this thesis H-bonded systems (natural gas hydrates, water clusters, and crystal ice) are studied by density functional theory (DFT) computations. Natural gas hydrates (NGHs) play an important role in energy and environmental fields: NGHs are considered as a promising backup energy resource in the near-future due to their tremendous carbon content; improper exploration of NGHs could induce geological disasters and aggravate the greenhouse effect. In addition, many technologies based on gas hydrates are being applied and developed. The thermodynamic stabilities of various water cavities in different clathrate crystalline phases occupied by hydrocarbon gas molecules are studied by dispersion-corrected hybrid functionals. The Raman spectra of C-C and C-H stretching vibrations of hydrocarbon molecules in various water cavities in the solid state are derived. The trends of C-H stretching vibrational frequencies are found to follow the prediction by the “loose cage ─| tight cage” model. In addition, the trends and origins of 13C NMR chemical shifts of hydrocarbon molecules in various NGHs are presented. These theoretical results will enlarge the database of C-C and C-H stretching vibrational frequencies and 13C NMR parameters of hydrocarbon molecules in NGHs, and provide valuable information to help identify the types of clathrate phases and varieties of guest molecules included in NGHs samples taken from natural sites. The behavior of water clusters may help to understand the properties of its liquid and solid states. The thermodynamic stabilities and IR spectra of a small-, medium-, and large-sized water cluster are studied in this work. After full optimization of (H2O)20,54,100 using the hybrid functional B3LYP, the electronic energies, zero-point energies, internal energies, enthalpies, entropies, and Gibbs free energies of the water clusters are computed. The OH stretching vibrational IR spectra of (H2O)20,54,100 are also presented and split into sub-spectra for different H-bond types based on the specific contributions from each group. It is found that the OH stretching vibrational frequencies of water are sensitive to the conformations of the H-bonds and the vibrations of the H-bonds belonging to different types are located in separated regions in the IR spectra. Thus, the spectroscopic fingerprints will reflect the H-bond topology of the water molecules in a water cluster. Ice XI has been suggested to be involved in the process of planetary formation as a considerable electric field might be formed from the ferroelectric ice XI in space. IR and Raman spectroscopic technology can be directly used to identify the occurrence of ferroelectric ice XI in laboratory or extraterrestrial settings. Due to the difficulty for DFT to describe non-covalent systems, the performance of 16 different DFT methods applied on the ice Ih, VIII, IX, and XI crystal phases are assessed. Based on the computational accuracy and cost, the IR and Raman spectra of ice Ih and XI are derived and compared. The librational vibrations are found to be the identifier which can be used to distinguish ice Ih and ice XI in the universe. In addition, the existence only one kind of H-bond in ice Ih is demonstrated from the overlapping sub-spectra for different types of H-bonded pair configurations in 16 isomers of ice Ih. The region of water under negative pressure is an exotic land in lack of exploitation. Guest free clathrate hydrate (clathrate ice) of sII type has been recently confirmed experimentally at negative pressure. Does any other clathrate ice phase exist at negative pressure region? Since clathrate hydrate are isostructural with silica clathrate minerals and semiconductor clathrates, and crystal structure prediction by analogy with known structures and first-principles computations is an effective way to find new crystalline phases of solid materials, we are motived to look for new clathrate ice phases from silica or semiconductor clathrate materials based on first-principles computations. Borrowing the idea new clathrate frameworks of ZnO and SiC can be constructed by connecting their bubble clusters in different ways, new clathrate ice phases (sL, sL_I, sL_II, and sL_III) are generated by connecting the water bubble clusters according to different rules. Using the non-local dispersion-corrected vdW-DF2 functional, clathrate ice sL with ultralow density (0.6 g/cm3) is predicted by first-principles phase diagram computations to be stable under larger negative pressures than the sII phase. The phase diagram of water is thus extended into the lower negative pressure region.
Los estilos APA, Harvard, Vancouver, ISO, etc.
48

Sjödin, Martin. "Regulation of Proton Coupled Electron Transfer from Amino Acids in Artificial Model Systems: A Mechanistic Study". Doctoral thesis, Uppsala University, Department of Physical Chemistry, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-4132.

Texto completo
Resumen

Amino acid radicals are key redox intermediates in several natural enzymes including Cytochrome c peroxidase, DNA photolyase, ribonucletide reductase, cytochrome c oxidase and photosystem II. Electron transfer from amino acids is often coupled to deprotonation and this thesis concerns the coupling of electron transfer from tyrosine and tryptophan to trisbipyridineruthenium(III) with deprotonation in model complexes. Specifically the mechanisms for these proton coupled electron transfer reactions have been studied and the controlling parameters have been identified, the possible mechanisms being stepwise electron transfer followed by deprotonation and deprotonation followed by electron transfer or concerted electron transfer/deprotonation.

Proton coupled electron transfer reactions have been studied using nano-second flash photolysis in water solution and the effect of pH, temperature, reaction driving force, deuteration and nature of the amino acid has been determined. I have shown that the rate constant for the concerted reaction depends intrinsically on the mixing entropy of the released proton and that the pH-dependence can be used as an experimental tool for mechanistic discrimination. Moreover I have shown that the concerted reaction inherently has a high reorganisation energy due to the coupling of the electron motion with deprotonation. Hydrogen bonding to the transferring proton however significantly reduces this reorganisation energy. The concerted reaction also has a relatively high driving force counteracting the high reorganisation energy in the competition between the concerted reaction and the stepwise electron transfer first reaction. The relative importance of the high reorganisation energy and the high driving force for the concerted reaction determines the mechanistic outcome of the reaction, the stepwise reaction being favoured by high over-all driving forces and the concerted reaction by high pH.

By comparing my results from model complexes with tyrosineZ oxidation in photosystem II, I give strong evidence for a concerted electron transfer/deprotonation mechanism.

Los estilos APA, Harvard, Vancouver, ISO, etc.
49

Fredriksson, Lars. "A Brief Survey of Lévy Walks : with applications to probe diffusion". Thesis, Karlstad University, Division for Chemistry, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-5077.

Texto completo
Resumen

Lévy flights and Lévy walks are two mathematical models used to describe anomalous diffusion(i.e. those having mean square displacements nonlinearly related to time (as opposed to Brownian motion)). Lévy flights follow probability distributions p(|r|) yielding infinite mean square displacements since some rare steps are very long. Lévy walks, however, have coupled space-time probability distributions penalising very long steps. Both Lévy flights and Lévy walks are dominated by a few long steps, but most steps are much, much smaller. The semi-experimental part ofthis work dealt with how fluorescent probes moved in systems of cationic starch and latex/solutions of dodecyl trimethyl ammonium bromide, respectively. Visually, no Lévy walks couldbe detected. However, mathematical regression suggested enhanced diffusion and subdiffusion. Moreover, time-dependent diffusion coefficients were calculated. Also examined was how Microsoft Excel could be used to generate normal diffusion as well as anomalous diffusion.


Lévyflygningar och Lévypromenader är matematiska modeller som används för att beskriva anomal diffusion (i.e. dessa då medelvärdet av kvadratförflyttningarna är icke-linjärt relaterat tilltiden (till skillnad från Brownsk rörelse)). Lévyflygningar följer sannolikhetsfördelningar p(|r|)som ger oändliga medelkvadratförflyttningar eftersom vissa steg är väldigt långa. Lévypromenader,å andra sidan, har kopplade rum-tid-sannolikhetsfördelningar som kraftigt reducerar demycket långa stegen. Både Lévyflygningar och -promenader domineras av ett fåtal långa steg ävenom de flesta steg är mycket, mycket mindre. Den semiexperimentella delen av detta arbetestuderade hur fluorescerande prober rör sig i katjonisk stärkelse respektive latex/lösningar avdodecyltrimetylammoniumbromid. Inga Lévypromenader kunde ses. Emellertid taladematematisk regression för att superdiffusion och subdiffusion förelåg. Tidsberoende diffusionskoefficienter beräknades också. I detta arbete undersöktes även hur Microsoft Excel kan användas för att generera både normal och anomal diffusion.

Los estilos APA, Harvard, Vancouver, ISO, etc.
50

Lai, Chung-Chuan. "Phase Formation of Nanolaminated Transition Metal Carbide Thin Films". Doctoral thesis, Linköpings universitet, Tunnfilmsfysik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-137367.

Texto completo
Resumen
Research on inherently nanolaminated transition metal carbides is inspired by their unique properties combining metals and ceramics, such as higher damage tolerance, better machinability and lower brittleness compared to the binary counterparts, yet retaining the metallic conductivity. The interesting properties are related to their laminated structure, composed of transition-metalcarbide layers interleaved by non-transition-metal (carbide) layers. These materials in thin-film form are particularly interesting for potential applications such as protective coatings and electrical contacts. The goal of this work is to explore nanolaminated transition metal carbides from the aspects of phase formation and crystal growth during thin-film synthesis. This was realized by studying phases in select material systems synthesized from two major approaches, namely, fromdirect-deposition and post-deposition treatment. The first approach was used in studies on the Mo-Ga-C and Zr-Al-C systems. In the former system, intriguing properties have been predicted for the 3D phases and their 2D derivatives (socalled MXenes), while in the latter system, the phases are interesting for nuclear applications. In this work, the discovery of a new Mo-based nanolaminated ternary carbide, Mo2Ga2C, is evidenced from thin-film and bulk processes. Its structure was determined using theoretical and experimental techniques, showing that Mo2Ga2C has Ga double-layers in simple hexagonal stacking between adjacent Mo2C layers, and therefore is structurally very similar to Mo2GaC, except for the additional Ga layers. For the Zr-Al-C system, the optimization of phase composition and structure of Zr2Al3C4 in a thin-film deposition process was studied by evaluating the effect of deposition parameters. I concluded that the formation of Zr2Al3C4 is favored with a plasma flux overstoichiometric in Al, and with a minimum lattice-mismatch to the substrates. Consequently, epitaxial Zr2Al3C4 thin film of high quality were deposited on 4H-SiC(001) substrates at 800 °C. With the approach of post-deposition treatment, the studies were focused on a new method of thermally-induced selective substitution reaction of Au for the non-transition-metal layers in nanolaminated carbides. Here, the reaction mechanism has been explored in Al-containing (Ti2AlC and Ti3AlC2) and Ga-containing (Mo2GaC and Mo2Ga2C) phases. The Al and Ga in these phases were selectively replaced by Au while the carbide layers remained intact, resulting in the formation of new layered phases, Ti2Au2C, Ti3Au2C2, Mo2AuC, and Mo2(Au1-xGax)2C, respectively. The substitution reaction was explained by fast outward diffusion of the Al or Ga being attracted to the surface Au, in combination with back-filling of Au, which is chemically inert to the carbide layers,to the vacancies. The substitution reaction was further applied to Ga-containing nanolaminated carbides, (Cr0.5Mn0.5)2GaC and Mo2GaC, motivated by development of novel magnetic nanolaminates. The former experiment resulted in the formation of (Cr0.5Mn0.5)2AuC, where the retained (Cr0.5Mn0.5)2C layers allowed a comparative study on the magnetic properties under the exchange of Ga for Au. After Au substitution, reduction in the Curie temperature and the saturation magnetization were observed, showing a weakened magnetic exchange interaction of the magnetic (Cr0.5Mn0.5)2 Clayers across the Au. In the Mo2GaC case, an Fe-containing MAX phase, Mo2AC with 50 at.% of Fe on the A site, was synthesized through selective substitution of Au-Fe alloy for the Ga layers, showing the first direct evidence for Fe in the MAX-phase structure. The substitution of Fe did not take place on another Mo2GaC sample tested for Fe exchange only, indicating the essential role of Au in catalyzing the Fe-substitution reaction. The knowledge gained from this thesis work contributes to improved approaches for attaining thin films of nanolaminated transition metal carbides with desired phase composition and crystal quality. The reports on the new nanolaminated phases through exchange interactions are likely to expand the family of nanolaminated carbides and advance their properties, and trigger more studies on related (quasi-) 2D materials.
Los estilos APA, Harvard, Vancouver, ISO, etc.
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía