Libros sobre el tema "Procesos de manufactura"

Modern manufacturing processes. New York, N.Y: Industrial Press, 1991.

A, Brown James. Modern manufacturingprocesses. New York, N.Y: Industrial Press, 1991.

Lafferty, Peter. Cómo están hechas las cosas. Charlotte, NC: Stampley, 1995.

David, Anstey, Gower Jeremy y Mainline Design (Firm), eds. How things are made. Hurstpierpoint: Zigzag, 1994.

Houson, I. N. Process understanding: For scale-up and manufacture of active ingredients. Weinheim, Germany: Wiley-VCH, 2011.

D, Booker J., ed. Process selection: From design to manufacture. 2^a ed. Oxford, England: Butterworth-Heinemann, 2003.

Quality assurance in process plant manufacture. London: Elsevier Applied Science Publishers, 1986.

D, Booker J., ed. Process selection: From design to manufacture. London: Arnold, 1997.

Process planning: The design/manufacture interface. Boston, MA: Butterworth-Heinemann, 2003.

Lindberg, Roy A. Processes and materials of manufacture. 4^a ed. Boston: Allyn and Bacon, 1990.

Mushet, Robert Forester. The Bessemer-Mushet process, or, manufacture of cheap steel. Eindhoven: De Archaeologische Pers, 1986.

Instrumentation and process measurements. Harlow: Longman Scientific & Technical, 1991.

International Conference on Advanced Design and Manufacture (2nd 2009 Harbin, China). Advanced design and manufacture II. Stafa-Zurich, Switzerland: Trans Tech, 2010.

Hudson, Jennifer. Process: 50 product designs from concept to manufacture. London: Laurence King, 2008.

Hudson, Jennifer. Process: 50 product designs from concept to manufacture. 2^a ed. London: Laurence King Pub., 2011.

National Conference on Manufacturing Research (10th 1994 Loughborough University of Technology). Advances in manufacturing technology VIII: Proceedings of the Tenth National Conference on Manufacturing Research, Loughborough University of Technology, 5-7 September 1994. London: Taylor & Francis, 1994.

Milner, D. A. Computer-aided engineering for manufacture. London: Kogan Page, 1986.

C, Vasiliou V., ed. Computer-aided engineering for manufacture. New York: McGraw-Hill, 1987.

Elliott, Gordon. The design process in British ceramic manufacture, 1750-1850. [Stafford, Staffordshire]: Staffordshire University Press, 2002.

Byrd, Jack. Simple truths. Morgantown, WV (West Virginia Univ., College of Engineering, P.O. Box 6101, Morgantown 26506-6101): Think About ... Press, 1991.

Riggs, Thomas. How everyday products are made. Farmington Hills, Mich: U-X-L, a part of Cengage Learning, 2016.

Temple, Black J. y Kohser Ronald A, eds. Materials and processes in manufacturing. 8^a ed. New York: Wiley, 1999.

Temple, Black J. y Kohser Ronald A, eds. Materials and processes in manufacturing. 8^a ed. Upper Saddle River, NJ: Prentice Hall, 1997.

Temple, Black J. y Kohser Ronald A, eds. Materials and processes in manufacturing. 8^a ed. Upper Saddle River, N.J: Prentice-Hall International, 1997.

Temple, Black J. y Kohser Ronald A, eds. Materials and processes in manufacturing. 7^a ed. New York: Macmillan Pub. Co., 1988.

Workshop, on Process Optimisation Product Development and Instrumentation Systems on Jute Blends (1994 Bombay India). Workshop on Process Optimisation, Product Development, and Instrumentation Systems on Jute Blends. Bombay: Bombay Textile Research Association, 1994.

Uniejewski, Jan. Analiza rozkładu warstwy skrawanej w procesie dłutowania kół zębatych. Poznań: Wydawn. Poznańskiego Tow. Przyjaciół Nauk, Wydz. Nauk Technicznych, 1994.

Lui, C. W. K., 1955-, ed. Computer-aided design and manufacture. 3^a ed. Chichester [West Sussex]: E. Horwood, 1986.

Besant, C. B. Computer-aided design and manufacture. Chichester: Ellis Horwood, 1991.

Handbook of worsted wool and blended suiting process. New Delhi: Woodhead Pub. India, 2010.

Tomar, R. S. Handbook of worsted wool and blended suiting process. New Delhi: Woodhead Pub. India, 2010.

Viale, J. David. Basics of manufacturing: Fundamental concepts for decision makers. Menlo Park, Calif: Crisp Publ., 1995.

1958-, Zaroli Luciano, ed. L' automazione dei processi di produzione: Tendenze tecnologiche e prospettive economiche. Milano, Italy: F. Angeli, 1985.

Miller, R. E. Batch pretreatment process technology for abatement of emissions and conservation of energy in glass melting furnaces: Phase IIA, process design manual. Cincinnati, OH: U.S. Environmental Protection Agency, Water Engineering Research Laboratory, 1985.

Tamayo, Emilio S. Antelo. Tarija: Procesos productivos y condiciones laborales en la agroindustria azucarera. La Paz, Bolivia: CEDLA, 1999.

Tamayo, Emilio S. Antelo. Tarija: Procesos productivos y condiciones laborales en la industria lechera. La Paz, Bolivia: CEDLA, 1999.

Dumais, Guy. Geographic concentration as a dynamic process. Cambridge, MA: National Bureau of Eonomic Research, Inc., 1997.

Chris, Chapman. Development of process to manufacture glass products from phosphogypsum: Final report. Bartow, Fla: The Institute, 1999.

Lloyd's Register of Shipping (Firm : 1914- ). Rules for the manufacture, testing and certification of materials 1993. London: Lloyd's Register of Shipping, 1993.

Soloman, Sabrie. Sensors and control systems in manufacturing. 2^a ed. New York: McGraw-Hill, 2010.

Flaig, L. Scott. Integrative manufacturing: Transforming the organization through people, process, and technology. Homewood, Ill: Business One Irwin, 1993.

Balistocky, S. The role of the DAPIA in the manufactured housing process. Richland, Wash: Pacific Northwest Laboratory, 1986.

International Conference on Advanced Design and Manufacture (3rd 2010 Nottingham, England). Advanced design and manufacture III: Selected, peer reviewed papers from the 3rd International Conference on Advanced Design and Manufacture (ADM2010), 8-10 September 2010, Nottingham, UK. Stafa-Zurich, Switzerland: Trans Tech Publications, 2011.

United States International Trade Commission. Engineered process gas turbo-compressor systems from Japan. Washington, DC: U.S. International Trade Commission, 1997.

United States International Trade Commission. Engineered process gas turbo-compressor systems from Japan. Washington, DC: U.S. International Trade Commission, 1996.

Hough, Paul G. Impacts of advanced manufacturing technology on parametric estimating. Santa Monica, CA: Rand, 1989.

Hough, Paul G. Impacts of advanced manufacturing technology on parametric estimating. Santa Monica, CA: Rand, 1989.

Ierapetritou, Marianthi G. y Rohit Ramachandran, eds. Process Simulation and Data Modeling in Solid Oral Drug Development and Manufacture. New York, NY: Springer New York, 2016. http://dx.doi.org/10.1007/978-1-4939-2996-2.

Edwards, Harry W. Waste minimization assessment for a manufacturer of coated parts. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1994.

Edwards, Harry W. Waste minimization assessment for a manufacturer of coated parts. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1994.