Libros sobre el tema "Resinas epoxi"

Ita, Paul A. Epoxy resins. Cleveland, OH: Freedonia Group, Inc., 1998.

Dušek, K. Epoxy resins and composites. Berlin [etc.]: Springer-Verlag, 1985.

Ita, Paul A., Pam Safarek y Aaron Hackle. Epoxy resins in North America. Cleveland: Freedonia Group, 2000.

Dušek, K., ed. Epoxy Resins and Composites IV. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/3-540-16423-5.

Dušek, K., ed. Epoxy Resins and Composites II. Berlin/Heidelberg: Springer-Verlag, 1986. http://dx.doi.org/10.1007/bfb0017912.

Dušek, K., ed. Epoxy Resins and Composites III. Berlin/Heidelberg: Springer-Verlag, 1986. http://dx.doi.org/10.1007/bfb0035355.

Dusek, K. Epoxy resins and composites II. Berlin: Springer, 1986.

Ellis, Bryan, ed. Chemistry and Technology of Epoxy Resins. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2932-9.

Epoxy resins, curing agents, compounds, and modifiers: An industrial guide. Park Ridge, N.J., U.S.A: Noyes Publications, 1987.

Epoxy resins, curing agents, compounds, and modifiers: An industrial guide. 2^a ed. Park Ridge, N.J., U.S.A: Noyes Publications, 1993.

Robinson, Thomas Christopher. Optimising damping in HBP modified epoxy resins. Birmingham: University of Birmingham, 2003.

Tarvainen, Kyllikki. Occupational dermatoses from plastic composites based on polyester resins, epoxy resins and vinyl ester resins. Helsinki: Finnish Institute of Occupational Health, 1996.

Griffiths, Robert Paul. Physical aging effects in cross-linked epoxy resins. Uxbridge: Brunel University, 1988.

Poe, C. C. Tension strength of a thick graphite/epoxy laminate after impact by a 1/2-in. -radius impactor. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1987.

Epoxy injection in construction. Addison, Ill: Aberdeen Group, 1997.

Epoxy polymers: New materials and innovations. Weinheim: Wiley-VCH, 2010.

Inc, Gougeon Brothers. Fiberglass boat repair & maintenance: With West System epoxy. Bay City: Gougeon Brothers, 1988.

Wilford, Andrea. Structural and Kinetic studies of polysulphide-modified epoxy resins. [s.l.]: typescript, 1989.

Dow, Marvin B. Properties of two composite materials made of toughened epoxy resin and high-strain graphite fiber. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Meleshevich, A. P. Radiat͡s︡ionnai͡a︡ khimii͡a︡ ėpoksidnykh soedineniĭ. Kiev: Nauk. dumka, 1989.

Hoeven, W. van der. Determination of the resin content in DSC prepreg samples using thermal analysis techniques. Amsterdam: National Aerospace Laboratory, 1988.

Chhabra, Rajendra. NTP technical report on the toxicology and carcinogenesis studies of 4-vinyl-1-cyclohexene diepoxide (CAS no. 106-87-6) in F344/N rats and B6C3F ́mice (dermal studies). Research Triangle Park, NC: U.S. Dept. of Health and Human Services, Public Health Service, National Institutes of Health, 1989.

Baumgartner, William G. y Sarah R. Sphar. World thermoset resins. Cleveland: Freedonia Group, 2000.

Singh, Jag J. Free-volume characteristics of epoxies. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Singh, Jag J. Free-volume characteristics of epoxies. Hampton, Va: Langley Research Center, 1992.

Singh, Jag J. Free-volume characteristics of epoxies. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Newman, G. R. Resin microscopy and on-section immunocytochemistry. Berlin: Springer-Verlag, 1993.

Bryden, James E. Reflectivity and durability of epoxy pavement markings. Albany, N.Y: Engineering Research and Development Bureau, New York State Dept. of Transportation, 1985.

Brothers, Gougeon. West System products technical manual: A complete manual for the use and application of West System brand products in wooden structure. Bay City, Mich: Gougeon Brothers, 1989.

Työterveyslaitos y Teknillinen Korkeakoulu. Faculty of Process Engineering and Material Science., eds. Occupational skin diseases from epoxy compounds: Epoxy resin compounds, epoxy acrylates, and 2,3-epoxypropyl trimethyl ammonium chloride. Helsinki: Institute of Occupational Health, 1991.

Hoeven, W. van der. DSC measurements on experimental TGDDM/DDS resin systems: The influence of variations in resin composition and catalyst content. Amsterdam: National Aerospace Laboratory, 1990.

Greenfield, David C. L. The cure characteristics and physical properties of glycidyl-ether epoxy resins. Uxbridge: Brunel University, 1988.

Gu, Xiaohong. Micromechanics of model carbon-fibre/epoxy-resin composites. Manchester: UMIST, 1995.

Ring, Sandy. Epoxy--its use in one off boats and industrial composites. [U.S.A.]: S. Ring, 1987.

Rule, D. L. Low-temperature thermal conductivity of composites: Alumina fiber/epoxy and alumina fiber/PEEK. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

Rule, D. L. Low-temperature thermal conductivity of composites: Alumina fiber/epoxy and alumina fiber/PEEK. Boulder, Colo: U.S. Dept. of Commerce, National Bureau of Standards, 1989.

Boyd, Heidi. Exploring resin jewelry: Simple techniques for 25 projects. Cincinnati, Ohio: North Light Books, 2012.

Rule, D. L. Low-temperature thermal conductivity of composites: Alumina fiber/epoxy and alumina fiber/PEEK. Boulder, Colo: U.S. Dept. of Commerce, National Bureau of Standards, 1989.

Rule, D. L. Low-temperature thermal conductivity of composites: Alumina fiber/epoxy and alumina fiber/PEEK. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

Rule, D. L. Low-temperature thermal conductivity of composites: Alumina fiber/epoxy and alumina fiber/PEEK. Boulder, Colo: U.S. Dept. of Commerce, National Bureau of Standards, 1989.

Rezaifard, Amir H. Toughening of epoxy resin by polymethylmethacrylate-grafted-natural rubbers. Uxbridge: Brunel University, 1990.

Keinanen, Heikki. Interlaminar mode-II fracture toughness of a glass-fiber epoxy laminate. Espoo, Finland: Technical Research Centre of Finland, 1992.

Lance, D. G. Low velocity instrumented impact testing of four new damage tolerant carbon/epoxy composite systems. Huntsville, Ala: George C. Marshall Space Flight Center, 1990.

Bannister, D. J. Micromechanical and hydrothermal behaviour of single-fibre epoxy resin composites. Manchester: UMIST, 1996.

Wazzan, A. Investigation into a new route to rubber-toughened epoxy resin composites using resin transfer moulding. Manchester: UMIST, 1995.

Evans, R. W. Test report--fault current through graphite filament reinforced plastic: Under contract NAS8-39983. Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, [George C. Marshall Space Flight Center, 1997.

Attias, Andre-Jean. Etude des mecanismes de la reticulation et analyse de la structure de la resine epoxy TGMDA/DDS. Chatillon, France: Office national d'etudes et de recherches aerospatiales, 1988.

May, Clayton. Epoxy Resins. 2^a ed. CRC, 1987.

Karel, Dušek y Dave R, eds. Epoxy resins and composites IV. Berlin: Springer-Verlag, 1986.

Dusek, K. Epoxy Resins and Composites I. Springer, 2013.