Se connecter

Bibliographies thématiques / Addition process / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Addition process.

Articles de revues sur le sujet « Addition process »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Addition process ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Smítková, H., M. Marek, and J. Dobiáš. "Starch tray with addition of different components foamed by baking process." Czech Journal of Food Sciences 31, No. 3 (2013): 230–35. http://dx.doi.org/10.17221/241/2012-cjfs.

Texte intégral

Résumé :

The possibilities of improving starch/water batter foam properties by additions of inorganic and organic compounds, waste sawdust and waste paper pulp were investigated. The most suitable ratio between starch and water was set to 2:3. The best results were obtained when calcium stearate was added to the starch/water tray because it filled the matrix of the tray and improved the surface. The addition of calcium stearate and a low amount of waste paper pulp and/or waste sawdust also brought good results. Higher amounts of waste sawdust and calcium stearate did not produce the compact and smooth

Styles APA, Harvard, Vancouver, ISO, etc.

2

Francis, Vishal, and Prashant K. Jain. "Effect of stage-dependent addition of nanoparticles in additive manufacturing." Journal of Thermoplastic Composite Materials 33, no. 3 (2018): 357–76. http://dx.doi.org/10.1177/0892705718805528.

Texte intégral

Résumé :

Recent advancements in the additive manufacturing (AM) technology have increased its utilization in various engineering sectors for the development of end-use products. However, the limited choice of available materials tends to limit its application domain. Addition of nanoparticles can significantly improve the material properties of the AM parts. Moreover, nanoparticles can be added in different stages of the process which will play an important role in determining the increase in material properties. This aspect of the stage-dependent addition of nanoparticles in AM process has not been fu

Styles APA, Harvard, Vancouver, ISO, etc.

3

Qin, Lin Ling, Jing Chi Yu, and Hao Chen. "The Process of Interior Progressive Addition Lens." Key Engineering Materials 364-366 (December 2007): 1054–60. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.1054.

Texte intégral

Résumé :

The characteristics of Progressive addition lens (PAL) are described in this paper. Theoretical analysis of advantages of Interior PAL is put forward, and the measurement results of Interior PAL are given. Theoretical and measurement results are consistent by comparing Interior PAL and Exterior PAL. Then the working procedures of freeform CNC machine of making Interior PAL are introduced concisely. Also, the experiments were carried out to analyzing the processing results in turning and polishing. From the results, it is explicit that the lens’ form accuracy is controlled in turning and lens’

Styles APA, Harvard, Vancouver, ISO, etc.

4

Görnerup, M., and P. Sjöberg. "AODCLU process modelling: optimum mixed reductants addition." Ironmaking & Steelmaking 26, no. 1 (1999): 58–63. http://dx.doi.org/10.1179/030192399676951.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Cohen, Leslie B., and Kathryn S. Marks. "How infants process addition and subtraction events." Developmental Science 5, no. 2 (2002): 186–201. http://dx.doi.org/10.1111/1467-7687.00220.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Lee, Hongjoo, Youngno Kim, Hangyeol Cho, Jin-geun Lee, and Jung Hyun Kim. "Improvement of PEDOT:PSS linearity via controlled addition process." RSC Advances 9, no. 30 (2019): 17318–24. http://dx.doi.org/10.1039/c9ra03040a.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Görnerup, M., and P. Sjöberg. "AOD/CLU process modelling: optimum mixed reductants addition." Ironmaking & Steelmaking 26, no. 1 (1999): 58–63. http://dx.doi.org/10.1179/irs.1999.26.1.58.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Ayyakkannu, A., P. C. Naganoor, P. S. Kumar, and Basavaraj Hatti. "Sustainability Evaluation for Metallurgical Value Addition Process Facility." Applied Ecology and Environmental Sciences 8, no. 6 (2020): 526–29. http://dx.doi.org/10.12691/aees-8-6-27.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Michalski, Jacek A. "Equilibria in Limestone-Based FGD Process: Magnesium Addition." Industrial & Engineering Chemistry Research 45, no. 6 (2006): 1945–54. http://dx.doi.org/10.1021/ie050160p.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Wang, Aileen R., and Shiping Zhu. "Modeling the reversible addition-fragmentation transfer polymerization process." Journal of Polymer Science Part A: Polymer Chemistry 41, no. 11 (2003): 1553–66. http://dx.doi.org/10.1002/pola.10701.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Fitriyanti, Reno, M. M. Lanny W. Pandjaitan, Lukas Lukas, Gilang Bagaskara Harlis, Agus Wahyudi, and Muhrinsyah Fatimura. "Effect of EDTA Addition on Acidizing Treatment Process." CHEESA: Chemical Engineering Research Articles 6, no. 2 (2023): 95. http://dx.doi.org/10.25273/cheesa.v6i2.15647.95-104.

Texte intégral

Résumé :

<p>Acidizing treatment is commonly used to solve scale problem on production equipment. In this process, Hydrochloric acid (HCl) is often used to treat CaCO<sub>3</sub> scale, posing the risk of pipe corrosion due to its high corrosive characteristics. Thus, the purpose of this study was to determine the impact of adding EDTA additive into HCl solution during the acidifying treatment procedure. The methodology included various stages such as scale identification, chemical scale removal test using 7.5% and 15% HCL solution, 15% HCl solution test with EDTA as an additive, and c

Styles APA, Harvard, Vancouver, ISO, etc.

12

Zulfia, Anne, Deliana Ramdaniawati, and Donanta Dhaneswara. "he Role of Al2O3 Nanoparticles Addition on Characteristic of Al6061 Composite Produced by Stir Casting Process." International Journal of Materials Science and Engineering 6, no. 2 (2018): 39–47. http://dx.doi.org/10.17706/ijmse.2018.6.2.39-47.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

13

Ray, Suman, Asim Bhaumik, Malay Pramanik, Ray J. Butcher, Sema Ozturk Yildirim, and Chhanda Mukhopadhyay. "Binary conjugate Brønsted–Lewis acid supported on mesoporous silica nanoparticles for the domino addition/elimination/addition and addition/elimination/addition/cyclization cascade." Catalysis Communications 43 (January 2014): 173–78. http://dx.doi.org/10.1016/j.catcom.2013.10.012.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

Liu, Yiwei, Xiang Li, Shaohua Wu, Zhao Tan, and Chunping Yang. "Enhancing anaerobic digestion process with addition of conductive materials." Chemosphere 278 (September 2021): 130449. http://dx.doi.org/10.1016/j.chemosphere.2021.130449.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Perry, Alan E. "PowerPoint Presentations: A Creative Addition to the Research Process." English Journal 92, no. 6 (2003): 64. http://dx.doi.org/10.2307/3650537.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

16

Gumerman, George, and Bruce S. Umemoto. "The Siphon Technique: An Addition to the Flotation Process." American Antiquity 52, no. 2 (1987): 330–36. http://dx.doi.org/10.2307/281784.

Texte intégral

Résumé :

To enhance the recovery of dense, nonfloating botanical remains, we used a siphon subsequent to the normal flotation process. The siphon vacuums the heavy fraction of a flotation sample and retrieves most of the non-floating botanical material. Experiments show an improvement averaging 9.9% and 11.3% by count and weight, respectively, for the recovery of high-density botanical remains using the siphon technique.

Styles APA, Harvard, Vancouver, ISO, etc.

17

Nakashima, Mitsuki, Junya Fujimoto, Toshiyuki Yamaguchi, Junji Sasano, and Masanobu Izaki. "KF addition to Cu2SnS3thin films prepared by sulfurization process." Japanese Journal of Applied Physics 56, no. 4S (2017): 04CS02. http://dx.doi.org/10.7567/jjap.56.04cs02.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Herawati, H., E. Kamsiati, and Abubakar. "Influence of Peanut Flour Addition on Rasi Process Production." IOP Conference Series: Earth and Environmental Science 309 (October 9, 2019): 012044. http://dx.doi.org/10.1088/1755-1315/309/1/012044.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

19

Abaee, M. Saeed, Somayeh Cheraghi, Somayeh Navidipoor, Mohammad M. Mojtahedi, and Soodabeh Forghani. "An efficient tandem aldol condensation-thia-Michael addition process." Tetrahedron Letters 53, no. 33 (2012): 4405–8. http://dx.doi.org/10.1016/j.tetlet.2012.06.040.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

20

Bodke, A. S., D. A. Olschki, and L. D. Schmidt. "Hydrogen addition to the Andrussow process for HCN synthesis." Applied Catalysis A: General 201, no. 1 (2000): 13–22. http://dx.doi.org/10.1016/s0926-860x(00)00419-1.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Wong, J. "Effects of lime addition on sewage sludge composting process." Water Research 34, no. 15 (2000): 3691–98. http://dx.doi.org/10.1016/s0043-1354(00)00116-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

SATO, Mitsutaka, and Atsushi NAKAHIRA. "Influence of Fe addition to hydroxyapatite by hydrothermal process." Journal of the Ceramic Society of Japan 121, no. 1415 (2013): 559–62. http://dx.doi.org/10.2109/jcersj2.121.559.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

23

Pan, Junting, Ronghua Li, Limei Zhai, Zengqiang Zhang, Junyi Ma, and Hongbin Liu. "Influence of palygorskite addition on biosolids composting process enhancement." Journal of Cleaner Production 217 (April 2019): 371–79. http://dx.doi.org/10.1016/j.jclepro.2019.01.227.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

24

Mah, Sang Kook, and In Jae Chung. "Effects of dimethyldiethoxysilane addition on tetraethylorthosilicate sol-gel process." Journal of Non-Crystalline Solids 183, no. 3 (1995): 252–59. http://dx.doi.org/10.1016/0022-3093(94)00631-8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

25

Shirley, Luke D., Victor Ceban, Marta Meazza, and Ramon Rios. "Organocatalytic Fluoromalonate Addition to Tetrahydroisoquinolines through a CDC process." ChemistrySelect 1, no. 1 (2016): 13–16. http://dx.doi.org/10.1002/slct.201500022.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

26

Perry, Alan E. "PowerPoint Presentations: A Creative Addition to the Research Process." English Journal 92, no. 6 (2003): 64–69. http://dx.doi.org/10.58680/ej20031084.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

27

Febriana, Eni, Agus Budi Prasetyo, Wahyu Mayangsari, et al. "Effect of Sulfur Addition to Nickel Recovery of Laterite Ore." Jurnal Kimia Sains dan Aplikasi 23, no. 1 (2019): 14–20. http://dx.doi.org/10.14710/jksa.23.1.14-20.

Texte intégral

Résumé :

This research studied the effect of the addition of sulfur on the reduction process of limonite nickel laterite ore with Ni content of 1.11wt% and Fe 48.7wt%. The stages of the research included the characterization of ore materials, preparation, mixing, pelleting, reduction, and magnetic separation. The reduction stage was carried out with several experimental variables, which were the time and temperature of the reduction, as well as the addition of reducing agents and sulfur additives. Products from the reduction process were separated magnetically, and the concentrate was then analyzed usi

Styles APA, Harvard, Vancouver, ISO, etc.

28

TAKAHASHI, Sanyo, Iwao YAMASHITA, and Kouji KOREMATSU. "Influence of Initial Concentration on DeNOx Process by Ammonia Addition." JSME international journal. Ser. 2, Fluids engineering, heat transfer, power, combustion, thermophysical properties 33, no. 2 (1990): 377–83. http://dx.doi.org/10.1299/jsmeb1988.33.2_377.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

29

Paleo, Ehecatl, Yazmin M. Osornio, and Luis D. Miranda. "Synthesis of (±)-desethylrhazinal using a tandem radical addition-cyclization process." Org. Biomol. Chem. 9, no. 2 (2011): 361–62. http://dx.doi.org/10.1039/c0ob00572j.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

30

TAKAHASHI, Sanyo, Iwao YAMASHITA, and Kouji KOREMATSU. "Influence of initial concentrations on DeNOx process by ammonia addition." Transactions of the Japan Society of Mechanical Engineers Series B 55, no. 509 (1989): 239–45. http://dx.doi.org/10.1299/kikaib.55.239.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

31

He, Yuanyuan, Qingcai Liu, Jian Yang, and Wenchang Xi. "Effect of WO3 Addition Process on V2O5/TiO2 Monolithic Catalysts." Asian Journal of Chemistry 25, no. 11 (2013): 5912–16. http://dx.doi.org/10.14233/ajchem.2013.14165.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

32

Yamamoto, S., Y. Momoi, and K. Kajikawa. "Nitrogen addition using a gas blow in an ESR process." IOP Conference Series: Materials Science and Engineering 143 (July 2016): 012005. http://dx.doi.org/10.1088/1757-899x/143/1/012005.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

33

Milkove, K. R., J. A. Coffin, and C. Dziobkowski. "Effects of argon addition to a platinum dry etch process." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 16, no. 3 (1998): 1483–88. http://dx.doi.org/10.1116/1.581174.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Isaccs, S. H., M. Henze, H. Søeberg, and M. Kümmel. "Activated Sludge Nutrient Removal Process Control by Carbon Source Addition." IFAC Proceedings Volumes 26, no. 2 (1993): 211–14. http://dx.doi.org/10.1016/s1474-6670(17)48716-7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

Stasinakis, Athanasios S., Nikolaos S. Thomaidis, Daniel Mamais, Evangelia C. Papanikolaou, Angeliki Tsakon, and Themistokles D. Lekkas. "Effects of chromium (VI) addition on the activated sludge process." Water Research 37, no. 9 (2003): 2140–48. http://dx.doi.org/10.1016/s0043-1354(02)00623-1.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

36

Chairaksa-Fujimoto, Romchat, Yosuke Inoue, Naoyoshi Umeda, Satoshi Itoh, and Tetsuya Nagasaka. "New pyrometallurgical process of EAF dust treatment with CaO addition." International Journal of Minerals, Metallurgy, and Materials 22, no. 8 (2015): 788–97. http://dx.doi.org/10.1007/s12613-015-1135-6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

37

Nakai, Kiyomichi, Sengo Kobayashi, Makoto Hidaka, Tatsuaki Sakamoto, and Hiroaki Kurishita. "Mechanical alloying process of vanadium powder with 1.7wt.%Y addition." Journal of Nuclear Materials 386-388 (April 2009): 587–90. http://dx.doi.org/10.1016/j.jnucmat.2008.12.183.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Puspitasari, P., R. Fauzan, T. L. Ginta, M. Mustapha, and D. Puspitasari. "Morphology of aluminium with nickel addition on sand casting process." Journal of Achievements in Materials and Manufacturing Engineering 1, no. 87 (2018): 13–17. http://dx.doi.org/10.5604/01.3001.0012.0734.

Texte intégral

Résumé :

Purpose: his research aimed to examine the morphology, elemental changes, and phase in the aluminium cast alloys with variations in nickel addition of 1%, 2% and 3%. Design/methodology/approach: Aluminium 98% was melted in sand casting process. The sand casting process was operated at 7000C and atmospheric pressure. The addition of nickel contain of 92.19% of its element. Specimens consist of 4 pieces Al-Ni with the size of 1 x 1 x 0.5 cm for morphological testing, while for phase identification testing consist of 4 pieces Al-Ni with the size of 1 x 1 x 2 cm. The morphological testing was perf

Styles APA, Harvard, Vancouver, ISO, etc.

39

SATO, Mitsutaka, and Atsushi NAKAHIRA. "Influence of Fe addition to hydroxyapatite by aqueous solution process." Journal of the Ceramic Society of Japan 121, no. 1413 (2013): 422–25. http://dx.doi.org/10.2109/jcersj2.121.422.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Montalvo, S. J., and M. P. Almeida. "Anaerobic process of soluble wastes with addition of activated carbon." Biotechnology Letters 14, no. 11 (1992): 1093–98. http://dx.doi.org/10.1007/bf01021066.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

41

Wulkow, Michael, Markus Busch, Thomas P. Davis, and Christopher Barner-Kowollik. "Implementing the reversible addition-fragmentation chain transfer process in PREDICI." Journal of Polymer Science Part A: Polymer Chemistry 42, no. 6 (2004): 1441–48. http://dx.doi.org/10.1002/pola.11089.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

42

Sk, Samsul Alam. "Addition of Two Equal and Opposite Integers: A Learning Process." International Journal of Mathematics Trends and Technology 69, no. 3 (2023): 50–57. http://dx.doi.org/10.14445/22315373/ijmtt-v69i3p507.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

43

Savić, Aleksandar, Ana Velemir, Saša Papuga, and Maja Stojković. "Influence of blackberry juice addition on mead fermentation and quality." Foods and Raw Materials 9, no. 1 (2021): 146–52. http://dx.doi.org/10.21603/2308-4057-2021-1-146-152.

Texte intégral

Résumé :

Introduction. Mead, one of the oldest alcoholic beverages that man consumed is obtained by fermentation of honey solution, and contains from 8 to 18% vol. ethanol. Honey can be considered as an excellent source of carbohydrates for the fermentation process, but low concentrations of other substances in the honey can slow down the process. Blackberry (Rubus fruticosus L.) contains dietary fibers, vitamin C (ascorbic acid), vitamin A, vitamin E, potassium and calcium, along with the phenolic metabolites that are a source of possible health benefits. Study objects and methods. In this study

Styles APA, Harvard, Vancouver, ISO, etc.

44

Maes, Lowie, Daniel Massana Roqeuro, Louis M. Pitet, Peter Adriaensens, and Tanja Junkers. "Sequence-defined nucleobase containing oligomers via reversible addition–fragmentation chain transfer single monomer addition." Polymer Chemistry 11, no. 12 (2020): 2027–33. http://dx.doi.org/10.1039/c9py01853k.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

45

Zarzycki, Bogusław, Izabela Dmytrów, and Elżbieta Prochowska. "Influence of addition of fat and its distribution in minced herring meat on course of process of freezing." Acta Ichthyologica et Piscatoria 31, no. 2 (2001): 145–61. http://dx.doi.org/10.3750/aip2001.31.2.11.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

46

Li, Fang, Jingqin Xu, Yajie Wang, Haiyan Zheng, and Kuo Li. "Pressure-Induced Polymerization: Addition and Condensation Reactions." Molecules 26, no. 24 (2021): 7581. http://dx.doi.org/10.3390/molecules26247581.

Texte intégral

Résumé :

Under pressure of 1–100 GPa, unsaturated organic molecules tend to form covalent bond to each other for a negative enthalpy change, which often produces polymeric materials with extended carbon skeleton. The polymerization reactions typically happen in crystal, which promotes the topochemical process. This review summarized the topochemical polymerization processes of several alkynes, aromatics, and alkynylphenyl compounds, including the critical crystal structures before the reaction, bonding process, and the structure of the products. Secondly, this review also summarized the condensation re

Styles APA, Harvard, Vancouver, ISO, etc.

47

La Via, Francesco, Gaetano Izzo, Massimo Camarda, Giuseppe Abbondanza, and Danilo Crippa. "Thick Epitaxial Layers Growth by Chlorine Addition." Materials Science Forum 615-617 (March 2009): 55–60. http://dx.doi.org/10.4028/www.scientific.net/msf.615-617.55.

Texte intégral

Résumé :

The growth rate of 4H-SiC epi layers has been increased up to 100 µm/h by chlorine addition. The epitaxial layers grown with this process have been characterized by electrical, optical and structural characterization methods. Very thick (> 100 µm) epitaxial layer has been grown and the Schottky diodes realized on these layers have good yield (> 87%) with a low defect density (10/cm2). This process gives the opportunity to realize very high power devices with breakdown voltages in the range of 10 kV or X-Ray and particle detectors with a low cost epitaxy process.

Styles APA, Harvard, Vancouver, ISO, etc.

48

Situmorang, Naila Izzatul Fikriyah, Zafira Az-Zahra, Ika Sucinta Erli, et al. "Learning of Addition and Subtraction Operations." TOFEDU: The Future of Education Journal 4, no. 6 (2025): 2314–18. https://doi.org/10.61445/tofedu.v4i6.670.

Texte intégral

Résumé :

The purpose of this study is to describe how the learning process of addition and subtraction operations is carried out. The object of this research is the learning of addition and subtraction operations, while the subjects are elementary school students. In this study, data collection was carried out by searching for journal references through online media such as Google Scholar. Addition and subtraction operations are fundamental parts of mathematics, usually taught at the early levels of elementary school. These operations are often introduced using concrete objects or pictures to make them

Styles APA, Harvard, Vancouver, ISO, etc.

49

Dobyns, Breanna M., Edward Duranty, and W. Matthew Reichert. "The Effects of Ionic Liquid Addition on the Heat of Polymerization of Additive Manufacturing Resins." ECS Meeting Abstracts MA2022-02, no. 55 (2022): 2090. http://dx.doi.org/10.1149/ma2022-02552090mtgabs.

Texte intégral

Résumé :

Ionic liquids can be utilized in stereolithography (SLA) additive manufacturing resins to adjust multiple parameters of the resulting polymer, such as chemical stability, temperature stability, and other key physical properties. While studies into these properties are ongoing, little is known about the effects the presence of these ILs has on the polymerization process. This study intends to use a new technique incorporating acoustic levitation, FLIR thermography, and differential scanning calorimetry (DSC) to provide insight into heat of polymerization of the resins utilizing an approach prev

Styles APA, Harvard, Vancouver, ISO, etc.

50

Bangtho, Katanyuta, Narumol Inprasitha, and Maitree Inprasitha. "Process Designing Mathematical Tasks on Addition of Teachers Using Lesson Study." Creative Education 06, no. 16 (2015): 1691–96. http://dx.doi.org/10.4236/ce.2015.616170.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!