Bibliographies thématiques / Adhesive performance

Sommaire

  1. Articles de revues
  2. Thèses
  3. Livres
  4. Chapitres de livres
  5. Actes de conférences
  6. Rapports d'organisations

Littérature scientifique sur le sujet « Adhesive performance »

Auteur : Grafiati
Publié le 15 février 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Adhesive performance ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Adhesive performance"

1

Ruffatto, Donald, Aaron Parness et Matthew Spenko. « Improving controllable adhesion on both rough and smooth surfaces with a hybrid electrostatic/gecko-like adhesive ». Journal of The Royal Society Interface 11, no 93 (6 avril 2014) : 20131089. http://dx.doi.org/10.1098/rsif.2013.1089.

Texte intégral
Résumé :
This paper describes a novel, controllable adhesive that combines the benefits of electrostatic adhesives with gecko-like directional dry adhesives. When working in combination, the two technologies create a positive feedback cycle whose adhesion, depending on the surface type, is often greater than the sum of its parts. The directional dry adhesive brings the electrostatic adhesive closer to the surface, increasing its effect. Similarly, the electrostatic adhesion helps engage more of the directional dry adhesive fibrillar structures, particularly on rough surfaces. This paper presents the new hybrid adhesive's manufacturing process and compares its performance to three other adhesive technologies manufactured using a similar process: reinforced PDMS, electrostatic and directional dry adhesion. Tests were performed on a set of ceramic tiles with varying roughness to quantify its effect on shear adhesive force. The relative effectiveness of the hybrid adhesive increases as the surface roughness is increased. Experimental data are also presented for different substrate materials to demonstrate the enhanced performance achieved with the hybrid adhesive. Results show that the hybrid adhesive provides up to 5.1× greater adhesion than the electrostatic adhesive or directional dry adhesive technologies alone.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Petković, Gorana, Marina Vukoje, Josip Bota et Suzana Pasanec Preprotić. « Enhancement of Polyvinyl Acetate (PVAc) Adhesion Performance by SiO2 and TiO2 Nanoparticles ». Coatings 9, no 11 (30 octobre 2019) : 707. http://dx.doi.org/10.3390/coatings9110707.

Texte intégral
Résumé :
Post press processes include various types of bonding and adhesives, depending upon the nature of adherends, the end use performance requirements and the adhesive bonding processes. Polyvinyl acetate (PVAc) adhesive is a widely used adhesive in the graphic industry for paper, board, leather and cloth. In this study, the enhancement of PVAc adhesion performance by adding different concentrations (1%, 2% and 3%) of silica (SiO2) and titanium dioxide (TiO2) nanoparticles was investigated. The morphology of investigated paper-adhesive samples was analyzed by SEM microscopy and FTIR spectroscopy. In addition, the optimal adhesion at the interface of paper and adhesive was found according to calculated adhesion parameters by contact angle measurements (work of adhesion, surface free energy of interphase, wetting coefficient). According to obtained surface free energy (SFE) results, optimum nanoparticles concentration was 1%. The wettability of the paper-adhesive surface and low SFE of interphase turned out as a key for a good adhesion performance. The end use T-peel resistance test of adhesive joints confirmed enhancement of adhesion performance. The highest strength improvement was achieved with 1% of SiO2 nanoparticles in PVAc adhesive.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Zhang, Jun, et Hong Jia. « Performance of Cohesive Zone Models for Brittle and Ductile Adhesives ». Advanced Materials Research 941-944 (juin 2014) : 2089–92. http://dx.doi.org/10.4028/www.scientific.net/amr.941-944.2089.

Texte intégral
Résumé :
Damage modeling approach is increasingly used to simulate fracture and debonding processes in adhesively bonded joint. In order to understand the relation between the delamination behavior of different types of adhesives and the type of cohesive zone models (CZMs), the pure tension and pure shear experiments were conducted used two distinct adhesives, an epoxy-based adhesive in a brittle manner and VHBTM tape adhesive in a ductile manner. The traction-separation relations of the two adhesives were extracted from the tension and shear experimental results. Three types of cohesive zone models (CZMs) are adopted, including the exponential, bilinear, and trapezoidal models. VUMAT subroutine of CZMs as the adhesive layer is used to simulate the specimen tension and shear debonding procedures. The results demonstrate that (i) the bilinear CZM more suitably describes the brittle adhesive and the exponential CZM suitably describes the ductile adhesive to simulate the tension and shear failure. (ii) cohesive strength and work of separation are the significant affections on the simulation results. and (iii) the shape of CZM is a significant affections on the simulation the pure tension and shear debonding procedure.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Bogue, Robert. « Recent innovations in adhesive technology ». Assembly Automation 35, no 3 (3 août 2015) : 201–5. http://dx.doi.org/10.1108/aa-10-2014-081.

Texte intégral
Résumé :
Purpose – This paper aims to provide an insight into recent innovations in adhesive technology by considering a selection of commercial developments and academic research activities. Design/methodology/approach – Following an introduction, this paper first discusses a selection of commercially developed adhesives used in the healthcare, photovoltaics and aerospace industries. It then considers biomimetic adhesive research, specifically dry adhesives which mimic the principles of gecko adhesion and wet adhesives based on the chemistry which underpins mussel adhesion. Finally, brief concluding comments are drawn. Findings – This shows that new adhesives continue to be developed to meet a growing range of industrial requirements, and a major research effort into biologically inspired adhesion mechanisms is poised to yield new families of high-performance adhesives. Originality/value – This provides details of recent commercial and academic developments in adhesive technology.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Anggini, Awanda, Muhammad Lubis, Rita Sari, Antonios Papadopoulos, Petar Antov, Apri Iswanto, Seng Lee, Efri Mardawati, Lubos Kristak et Ika Juliana. « Cohesion and Adhesion Performance of Tannin-Glyoxal Adhesives at Different Formulations and Hardener Types for Bonding Particleboard Made of Areca (Areca catechu) Leaf Sheath ». Polymers 15, no 16 (16 août 2023) : 3425. http://dx.doi.org/10.3390/polym15163425.

Texte intégral
Résumé :
The use of alternative raw materials, such as agricultural biomass and by-products, in particleboard (PB) production is a viable approach to address the growing global demand for sustainable wood-based materials. The purpose of this study was to investigate the effect of the type of hardener and tannin-glyoxal (TG) adhesive formulation on the cohesion and adhesion performance of TG adhesives for areca-based PB. Two types of hardeners were used, NH4Cl and NaOH, and three adhesive formulations with tannin:glyoxal ratios (i.e., F1 (1:2), F2 (1:1), and F3 (2:1)) were applied to improve the cohesion performance and adhesion for areca-based TG adhesive for PB. The basic, chemical, and mechanical properties of the TG adhesive were investigated using a Fourier transform infrared spectrometer, rotational rheometer, dynamic mechanical analyzer (DMA), and X-ray diffractometer. The results show that a high glyoxal percentage increases the percentage of crystallinity in the adhesive. This shows that the increase in glyoxal is able to form better polymer bonds. DMA analysis shows that the adhesive is elastic and the use of NH4Cl hardener has better mechanical properties in thermodynamic changes than the adhesive using NaOH hardener. Finally, the adhesion performance of the TG adhesives on various types of hardeners and adhesive formulations was evaluated on areca-based PB panels. Regardless of the type of hardener, the TG adhesive made with F1 had better cohesion and adhesion properties compared to F2 and F3. Combining F1 with NH4Cl produced areca-based PB panels with better physical and mechanical qualities than the adhesive formulations F2 and F3, and complied with Type 8 particleboard according to SNI 03-2105-2006 standard.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Al-Kaabi, Arshad F. Jassem. « Evaluating The Effect of Humidity on Adhesion Strength of Skin Adhesive ». Molecular and Cellular Biomedical Sciences 4, no 3 (2 novembre 2020) : 135. http://dx.doi.org/10.21705/mcbs.v4i3.148.

Texte intégral
Résumé :
Background: Skin adhesive has been used for attaching certain medical application to the human skin for functional and/or esthetic purposes. Silicone adhesive is the most common type of skin adhesives that are recently used. This study aims to evaluate the possible effect of humidity on the performance of silicone skin adhesive.Materials and Methods: Twenty-four silicone samples were divided into 2 main groups based on relative humidity (RH) exposure, namely 43% RH and 98% RH. Six samples from each group were tested for adhesion strength after 1 hour of adhesion, and the other 6 samples were tested after 2 hours of adhesion by conducting 180 degree peel test. The data were statistically analyzed for significant difference. Results: The results showed that at 43% RH, the adhesion strength was higher than the 98% RH group. The results also showed that at both humidity settings the adhesion strength after the first hours of adhesion was lower than the adhesion strength after the second hour.Conclusion: The silicone skin adhesive performance can be affected by the increase of relative humidity which needs more time of application to skin to reach the best adhesion function.Keywords: adhesions strength, humidity effect on adhesion, silicone adhesive, skin adhesives
Styles APA, Harvard, Vancouver, ISO, etc.
7

Bashir, Zoobia, Wenting Yu, Zhengyu Xu, Yiran Li, Jiancheng Lai, Ying Li, Yi Cao et Bin Xue. « Engineering Bio-Adhesives Based on Protein–Polysaccharide Phase Separation ». International Journal of Molecular Sciences 23, no 17 (1 septembre 2022) : 9987. http://dx.doi.org/10.3390/ijms23179987.

Texte intégral
Résumé :
Glue-type bio-adhesives are in high demand for many applications, including hemostasis, wound closure, and integration of bioelectronic devices, due to their injectable ability and in situ adhesion. However, most glue-type bio-adhesives cannot be used for short-term tissue adhesion due to their weak instant cohesion. Here, we show a novel glue-type bio-adhesive based on the phase separation of proteins and polysaccharides by functionalizing polysaccharides with dopa. The bio-adhesive exhibits increased adhesion performance and enhanced phase separation behaviors. Because of the cohesion from phase separation and adhesion from dopa, the bio-adhesive shows excellent instant and long-term adhesion performance for both organic and inorganic substrates. The long-term adhesion strength of the bio-glue on wet tissues reached 1.48 MPa (shear strength), while the interfacial toughness reached ~880 J m−2. Due to the unique phase separation behaviors, the bio-glue can even work normally in aqueous environments. At last, the feasibility of this glue-type bio-adhesive in the adhesion of various visceral tissues in vitro was demonstrated to have excellent biocompatibility. Given the convenience of application, biocompatibility, and robust bio-adhesion, we anticipate the bio-glue may find broad biomedical and clinical applications.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Czech, Zbigniew, Robert Pełech, Agnieszka Kowalczyk, Arkadiusz Kowalski et Rafał Wróbel. « Electrically conductive acrylic pressure-sensitive adhesives containing carbon black ». Polish Journal of Chemical Technology 13, no 4 (1 janvier 2011) : 77–81. http://dx.doi.org/10.2478/v10026-011-0053-2.

Texte intégral
Résumé :
Electrically conductive acrylic pressure-sensitive adhesives containing carbon black Acrylic pressure-sensitive adhesives (PSA) are non electrical conductive materials. The electrical conductivity is incorporated into acrylic self-adhesive polymer after adding electrically conductive additives like carbon black, especially nano carbon black. After an addition of electrical conductive carbon black, the main and typical properties of pressure-sensitive adhesives such as tack, peel adhesion and shear strength, are deteriorated. The investigations reveals that the acrylic pressure-sensitive adhesives basis must be synthesised with ameliorated initial performances, like high tack, excellent adhesion and very good cohesion. Currently, the electrical conductive solvent-borne acrylic PSA containing carbon black are not commercially available on the market. They are promising materials which can be applied for the manufacturing of diverse technical high performance self-adhesive products, such as broadest line of special electrically conductive sensitive tapes.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Ren, Xiue, Chenyang Fan, Jiayi Tu, Beixi Deng, Shuyi Xia, Yi Wu et YunQi Shou. « Study on Preparation and Performance of Polyurethane Hot Melt Adhesive Films ». Advances in Engineering Technology Research 5, no 1 (6 mai 2023) : 407. http://dx.doi.org/10.56028/aetr.5.1.407.2023.

Texte intégral
Résumé :
Polyurethane hot melt adhesive films (PHMAFs) are green adhesives without any solvent. In this study, a series of polyurethane hot melt adhesive films with different crosslinking agent content were successfully synthesized. The melting temperature, water absorption, mechanical properties, and adhesion properties were studied. The results illustrate that the introduction of crosslinking agent could endow PHMAFs with better final adhesion strengths and water resistance ability, but also lead to decrease of tensile stress at break and elongation at break. The final T-peel strength of the films was in the range of 76.54-114.53 N/cm, which could meet the requirements of the industrial gluing in footwear.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Garner, Austin M., Michael C. Wilson, Anthony P. Russell, Ali Dhinojwala et Peter H. Niewiarowski. « Going Out on a Limb : How Investigation of the Anoline Adhesive System Can Enhance Our Understanding of Fibrillar Adhesion ». Integrative and Comparative Biology 59, no 1 (27 avril 2019) : 61–69. http://dx.doi.org/10.1093/icb/icz012.

Texte intégral
Résumé :
Abstract The remarkable ability of geckos to adhere to a wide-variety of surfaces has served as an inspiration for hundreds of studies spanning the disciplines of biomechanics, functional morphology, ecology, evolution, materials science, chemistry, and physics. The multifunctional properties (e.g., self-cleaning, controlled releasability, reversibility) and adhesive performance of the gekkotan adhesive system have motivated researchers to design and fabricate gecko-inspired synthetic adhesives of various materials and properties. However, many challenges remain in our attempts to replicate the properties and performance of this complex, hierarchical fibrillar adhesive system, stemming from fundamental, but unanswered, questions about how fibrillar adhesion operates. Such questions involve the role of fibril morphology in adhesive performance and how the gekkotan adhesive apparatus is utilized in nature. Similar fibrillar adhesive systems have, however, evolved independently in two other lineages of lizards (anoles and skinks) and potentially provide alternate avenues for addressing these fundamental questions. Anoles are the most promising group because they have been the subject of intensive ecological and evolutionary study for several decades, are highly speciose, and indeed are advocated as squamate model organisms. Surprisingly, however, comparatively little is known about the morphology, performance, and properties of their convergently-evolved adhesive arrays. Although many researchers consider the performance of the adhesive system of Anolis lizards to be less accomplished than its gekkotan counterpart, we argue here that Anolis lizards are prime candidates for exploring the fundamentals of fibrillar adhesion. Studying the less complex morphology of the anoline adhesive system has the potential to enhance our understanding of fibril morphology and its relationship to the multifunctional performance of fibrillar adhesive systems. Furthermore, the abundance of existing data on the ecology and evolution of anoles provides an excellent framework for testing hypotheses about the influence of habitat microstructure on the performance, behavior, and evolution of lizards with subdigital adhesive pads.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Adhesive performance"

1

Su, Ning. « Durability and fatique performance of structural adhesives and adhesive joints ». Thesis, University of Dundee, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240601.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Razak, Zeenah. « The durability performance of automotive adhesive joints ». Thesis, Imperial College London, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.397238.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Nordqvist, Petra. « Exploring the Wood Adhesive Performance of Wheat Gluten ». Doctoral thesis, KTH, Ytbehandlingsteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-94883.

Texte intégral
Résumé :
The increasing environmental concern has reawakened an interest in materials based on renewable resources as replacement for petroleum-based materials. The main objective of this thesis was to explore plant proteins, more specifically wheat gluten, as a binder in wood adhesives intended for typical solid wood applications such as furniture and flooring. Alkaline and acidic dispersions of wheat gluten were used as wood adhesives to bond together beech wood substrates. Soy protein isolate was used as a reference. The tensile shear strengths of the substrates were measured for comparison of bond strength and resistance to cold water. AFM in colloidal probe mode was used to investigate nanoscale adhesion between cellulose and protein films. Wheat gluten was divided into the two protein classes; glutenins and gliadins, and their adhesive performance was compared with that of wheat gluten. Heat treatment and mild hydrolysis were investigated as means for improving bonding performance of wheat gluten. The treated wheat gluten samples were analysed by SE-HPLC and 13C-NMR to correlate molecular size distribution and structural changes with bonding performance. Soy protein isolate is superior to wheat gluten, especially in regards to water resistance. However, the bond strength of wheat gluten is improved when starved bond lines are avoided. The AFM analysis reveals higher interfacial adhesion between soy protein isolate and cellulose than between wheat gluten and cellulose. These results partly explain some of the differences in bonding performance between the plant proteins. Soy protein isolate contains more polar amino acid residues than wheat gluten and possibly interacts more strongly with cellulose. Furthermore, the bond performances of wheat gluten and glutenin are similar, while that of gliadin is inferior to the others, especially regarding water resistance. The extent of penetration of the dispersions into the wood material has a large impact on the results. The bonding performance of gliadin is similar to the others when over-penetration of the dispersion into the wood material is avoided. Moreover, the bond strength of the wheat gluten samples heated at 90°C was in general improved compared to that of wheat gluten. A small improvement was also obtained for some of the hydrolyzed wheat gluten samples (degree of hydrolysis: 0-0.6 %). The improvements in bonding performance for the heat treated samples are due to polymerization, while the improvements for the hydrolyzed samples are due to denaturation. The 13C-NMR analysis of the treated samples confirms some degree of denaturation.
QC 20120514
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mays, Geoffrey Charles. « Fatigue performance and durability of structural adhesive joints ». Thesis, University of Dundee, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334180.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Ranade, Shantanu Rajendra. « Performance Evaluation and Durability Studies of Adhesive Bonds ». Diss., Virginia Tech, 2014. http://hdl.handle.net/10919/64990.

Texte intégral
Résumé :
In this dissertation, four test approaches were developed to characterize the adhesion performance and durability of adhesive bonds for specific applications in areas spanning from structural adhesive joints to popular confectionaries such as chewing gum. In the first chapter, a double cantilever beam (DCB) specimen geometry is proposed for combinatorial fracture studies of structural adhesive bonds. This specimen geometry enabled the characterization of fracture energy vs. bondline thickness trends through fewer tests than those required during a conventional "one at a time" characterization approach, potentially offering a significant reduction in characterization times. The second chapter investigates the adhesive fracture resistance and crack path selection in adhesive joints containing patterns of discreet localized weak interfaces created using physical vapor deposition of copper. In a DCB specimen tested under mode-I conditions, fracture energy within the patterned regions scaled according to a simple rule of mixture, while reverse R-curve and R-curve type trends were observed in the regions surrounding weak interface patterns. Under mixed mode conditions such that bonding surface with patterns is subjected to axial tension, fracture energy did not show R-curve type trends while it was observed that a crack could be made to avoid exceptionally weak interfaces when loaded such that bonding surface with defects is subjected to axial compression. In the third chapter, an adaptation of the probe tack test is proposed to characterize the adhesion behavior of gum cuds. This test method allowed the introduction of substrates with well-defined surface energies and topologies to study their effects on gum cud adhesion. This approach and reported insights could potentially be useful in developing chewing gum formulations that facilitate easy removal of improperly discarded gum cuds from adhering surfaces. In the fourth chapter we highlight a procedure to obtain insights into the long-term performance of silicone sealants designed for load-bearing applications such as solar panel support sealants. Using small strain constitutive tests and time-temperature-superposition principle, thermal shift factors were obtained and successfully used to characterize the creep rupture master curves for specific joint configurations, leading to insights into delayed failures corresponding to three years through experiments carried out in one month.
Ph. D.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Pye, Andrew John. « The structural performance of glass-adhesive T-beams ». Thesis, University of Bath, 1998. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275417.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Klug, Jeremy Hager. « High-performance adhesive systems for polymer composite bonding applications / ». Thesis, Connect to this title online ; UW restricted, 1999. http://hdl.handle.net/1773/9883.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Trinh, Khanh. « Adhesive Performance of UV-cured Clearcoat on Galvanized Steel ». Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-261149.

Texte intégral
Résumé :
A study has been carried out regarding the possibility for application of UV-cured coatings on different pretreated galvanized steel, in coil coating application. In order to address the questions about whether the adhesion will be affected and how, when combining respective coating with a steel substrate. Two types of UV-curable formulations have been applied respectively, acrylate-based free radical formulation and epoxy-based cationic formulation, on five types of steel substrates. In addition, UV-LED was also investigated as an alternative energy source. The aim is to explore the curing of the coatings, the surface topology and hydrophilicity, the material and mechanical properties of coatings and coated systems respectively. It was found that the acrylate coating gives a hydrophilic surface while the epoxy coat is hydrophilic but is more hydrophobic than acrylate. The acrylate resin is not compatible with Standard Ti-pretreatment from PO substrates and the curing of epoxy is inhibited by pretreatment primer in PP substrates. Curing using UV-LED is possible and should be investigated further. No comparison could be made between coating systems acrylate and epoxy, regarding the adhesive performance, due to the failure of obtaining the right thickness for the acrylate coating.
I denna studie undersöktes möjligheten att applicera UV-härdande lacker på olika förbehandlade galvaniserade stålsorter för bandlackering. Detta för att förstå mer om vidhäftningen påverkas av, och på vilket sätt, kombinationen av respektive UV-lack med olika metallsubstrat. Två olika UV-formuleringar, akrylat and epoxy, applicerades på fem olika stålsubtrat och även screeningsstudie på UV-LED utfördes. Målet är att undersöka uthärdning av lackeringar, topologin och hydrofilicitet, material och mekaniska egenskaper hos färglacken och de lackade systemen, samt möjlighet att använda LED-lampa som UV-källan. Resultatet visar att akrylat ger en hydrofil yta medan epoxy är hydrofil men är mer hydrofob än akrylat. Akrylatet är inte kompatibelt med Standard Ti-pretreatment från PO substrat och uthärdning av epoxy inhiberas av förbehandlade primer på PP-prover. Uthärdning med UV-LED är möjligt och bör undersökas ytterligare. Det gick inte att jämföra mellan de två UV-formuleringarna, akrylat och epoxy, på grund av fel tjocklek hos akrylatfilmerna.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Jacobs, William P. V. « Performance of Pressure Sensitive Adhesive Tapes In Wood Light-Frame Shear Walls ». Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/32795.

Texte intégral
Résumé :
The performance of connections and full-scale shear walls constructed with acrylic foam pressure sensitive adhesive (PSA) tape is the focus of this thesis. The objectives of this study were first to investigate the bonding characteristics of adhesive tape to wood substrates and then to expand this investigation to cover adhesive-based shear walls subjected to high wind and seismic loadings. A total of 287 monotonic connection tests and 23 reversed cyclic wall tests were performed to achieve these objectives. Connection tests were performed in accordance with ASTM D 1761-88 (2000), and walls were tested using the CUREE (Consortium of Universities for Earthquake Engineering) general displacement-based protocol.

Variables investigated within the main study were the following: the use of OSB versus plywood sheathing, the effect of priming and surface sanding on adhesion, and the comparison of connections involving mechanical fasteners with those that utilized only adhesive tape or a combination of the two. It was found that an application pressure of 207 kPa (30 psi) or greater was needed to form a sound bond between the acrylic foam adhesive tape and a wood substrate. Properly bonded OSB and plywood connections provided fairly ductile failure modes. Full-scale walls constructed with adhesive tape performed similarly to traditional wall configurations, while walls constructed with a combination of adhesive tape and mechanical fasteners provided significant gains in strength and toughness. The results of this study serve to provide a foundation for expanding the engineering uses of acrylic foam adhesive tape for structural applications.
Master of Science

Styles APA, Harvard, Vancouver, ISO, etc.
10

Karhnak, Stephen J. « Predicting mechanical performance of adhesively bonded joints based on acousto-ultrasonic evaluation and geometric weighting ». Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-05022009-040452/.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Adhesive performance"

1

J, Rossiter Walter, et National Institute of Standards and Technology (U.S.), dir. Performance of tape-bonded seams of EPDM membranes : Effect of material and application factors on peel creep-rupture response. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

G, Vangel Mark, Kraft Kevin M et National Institute of Standards and Technology (U.S.), dir. Performance of tape-bonded seams of EPDM membranes : Factors affecting the creep-rupture response of tape-bonded and liquid-adhesive-bonded seams. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

G, Vangel Mark, Kraft Kevin M et National Institute of Standards and Technology (U.S.), dir. Performance of tape-bonded seams of EPDM membranes : Factors affecting the creep-rupture response of tape-bonded and liquid-adhesive-bonded seams. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Geoffrey, Vangel Mark, Kraft Kevin M et National Institute of Standards and Technology (U.S.), dir. Performance of tape-bonded seams of EPDM membranes : Factors affecting the creep-rupture response of tape-bonded and liquid-adhesive-bonded seams. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Geoffrey, Vangel Mark, Kraft Kevin M et National Institute of Standards and Technology (U.S.), dir. Performance of tape-bonded seams of EPDM membranes : Factors affecting the creep-rupture response of tape-bonded and liquid-adhesive-bonded seams. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

J, Rossiter Walter, et National Institute of Standards and Technology (U.S.), dir. Performance of tape-bonded seams of EPDM membranes : Comparison of the peel creep-rupture response of tape-bonded and liquid-adhesive-bonded seams. Gaithersburg, MD : U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1996.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Cook, Ronald A., Elliot P. Douglas, Todd M. Davis et Changhua Liu. Long-Term Performance of Epoxy Adhesive Anchor Systems. Washington, D.C. : Transportation Research Board, 2013. http://dx.doi.org/10.17226/22470.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Shires, David. Management brief : The performance and behaviour of adhesive bonds. [Leatherhead] : Pira, PackagingDivision, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Findlater, D. Adhesive bonding : Development of practical performance and production data for engineering applications. MeltonMowbray : PERA, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

United States. National Aeronautics and Space Administration., dir. Ultrasonic nondestructive characterization of adhesive bonds : Annual performance report, period covered--12/23/96-12/22/97, grant number--NAG-1-1810. [Washington, DC : National Aeronautics and Space Administration, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Adhesive performance"

1

Pocius, Alphonsus V. « Mechanical Tests of Adhesive Bond Performance ». Dans Adhesion and Adhesives Technology, 47–84. 4e éd. München : Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9781569908501.003.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Pocius, Alphonsus V. « Mechanical Tests of Adhesive Bond Performance ». Dans Adhesion and Adhesives Technology, 47–83. München : Carl Hanser Verlag GmbH & ; Co. KG, 2012. http://dx.doi.org/10.3139/9783446431775.003.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Pocius, Alphonsus V. « Mechanical Tests of Adhesive Bond Performance ». Dans Adhesion and Adhesives Technology, 47–84. München, Germany : Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-1-56990-850-1_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Lau, K. H. Aaron, et Phillip B. Messersmith. « Wet Performance of Biomimetic Fibrillar Adhesives ». Dans Biological Adhesive Systems, 285–94. Vienna : Springer Vienna, 2010. http://dx.doi.org/10.1007/978-3-7091-0286-2_19.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Driver, D. « Adhesive bonding for aerospace applications ». Dans High Performance Materials in Aerospace, 318–39. Dordrecht : Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0685-6_11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Shailesh, R., M. Ramu, M. Govindaraju, K. Karthikeyan et V. Satheeshkumar. « Performance Evaluation of Adhesive Spur Gear with the Influence of Properties of Adhesive ». Dans Lecture Notes on Multidisciplinary Industrial Engineering, 923–31. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9072-3_77.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Bathon, Leander, Oliver Bletz-Mühldorfer, Jens Schmidt et Friedemann Diehl. « Fatigue Performance of Adhesive Connections for Wooden Wind Towers ». Dans Materials and Joints in Timber Structures, 375–80. Dordrecht : Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-7811-5_34.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Shukla, Nitin, Alliston Watts, Christian Honeker et Jan Kośny. « Hygrothermal Impact of Adhesive-Applied Rooftop Photovoltaic System ». Dans Advances in Hygrothermal Performance of Building Envelopes : Materials, Systems and Simulations, 69–82. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2017. http://dx.doi.org/10.1520/stp159920160108.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Jachak, Shrikant, Ashvin Amale et Sachin Mahakalkar. « Performance Evaluation of Adhesive Bonded Tools Using Design of Experiments ». Dans Smart Technologies for Energy, Environment and Sustainable Development, Vol 1, 913–21. Singapore : Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-6875-3_73.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Singh, Jatinder, Paul A. Bingham, Jacques Penders et David Manby. « Effects of Residual Charge on the Performance of Electro-Adhesive Grippers ». Dans Towards Autonomous Robotic Systems, 327–38. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-40379-3_34.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Adhesive performance"

1

Li, Yang, Hao Zhang, Geng Xu, Ling Gong, Zhenzhong Yong, Qinwen Li et Zhendong Dai. « Adhesion performance of gecko-inspired flexible carbon nanotubes dry adhesive ». Dans SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, sous la direction de Raúl J. Martín-Palma et Akhlesh Lakhtakia. SPIE, 2013. http://dx.doi.org/10.1117/12.2012009.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Safdari, Masoud, Majid Baniassadi, Akbar Ghazavizadeh, David Ruch et Said Ahzi. « Numerical Simulation of Synthetic Microstructured Fibrillar Adhesive Pads ». Dans ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12846.

Texte intégral
Résumé :
Recently, the study, analysis and prototyping of biologically inspired adhesives pads have been subject of growing interest. These synthetic adhesives consist of rafts of tiny protruding fibers. The adhesion performance of these micro-engineered products is highly dependent on the geometrical and mechanical properties of microfibers and the surface they adhering to. Small fluctuations in these parameters can drastically change their adhesion performance. In this investigation, a more comprehensive mathematical model of a single micro-fiber with adhesion capability in contact with an uneven surface has been developed. To simulate realistic conditions, this analytical model could be extended to an array of micro-fibers. Using Monte Carlo techniques it was possible to study the behavior of an array of these micro-fibers under several degrees of uncertainty. The results deduced by this novel modeling approach are in good agreement with experimental measurements of adhesion performance in synthetic adhesive pads available in literature.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Morais, Cauê, André Pereira, Carlos Ney Mendes, Filipe Diniz, Lincoln Lima et Luiz Gustavo Campos. « Adhesive Bonding on Galvannealed Coated Steel : Adhesive and Weld Joint Performance ». Dans 25th SAE BRASIL International Congress and Display. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2016. http://dx.doi.org/10.4271/2016-36-0462.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Maddox, John F., Roy W. Knight, Sushil H. Bhavnani et John Evans. « Thermal Performance of Laminate-to-Aluminum Attachment Materials ». Dans ASME 2009 InterPACK Conference collocated with the ASME 2009 Summer Heat Transfer Conference and the ASME 2009 3rd International Conference on Energy Sustainability. ASMEDC, 2009. http://dx.doi.org/10.1115/interpack2009-89097.

Texte intégral
Résumé :
A non-destructive method was used to determine the effects of thermal cycling on the thermal performance of a PCB attached to an aluminum substrate with a thermal adhesive. This method allows for a comparison of the thermal performance of various TIMs in an industrial application. Testing was done on FR4 and Flex boards, both with and without overmolding, attached using PSA and an alternative adhesive. Baseline measurements were taken, then the boards were cycled from −40 to 125°C on a 90-minute cycle with 15-minute dwells at the target temperatures. It was found that both adhesives showed an increase in thermal conductivity, possibly due to curing, and delamination occurred at 17 out of 35 locations with the alternative adhesive within the first 1000 cycles while no delamination occurred with the PSA.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Linderman, Stephen W., Ioannis Kormpakis, Richard H. Gelberman, Victor Birman, Ulrike G. K. Wegst, Stavros Thomopoulos et Guy M. Genin. « Shear Lag Sutures : Improved Suture Repair Through the Use of Adhesives ». Dans ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67522.

Texte intégral
Résumé :
Conventional surgical suture is mechanically limited by the ability of the suture to transfer load to tissue at suture anchor points. Sutures coated with adhesives can improve mechanical load transfer beyond the range of performance of existing suture methods, thereby strengthening orthopaedic repairs and decreasing the risk of failure. The mechanical properties of suitable adhesives were identified using a shear lag model. Examination of the design space for an optimal adhesive demonstrated requirements for strong adhesion and low stiffness to maximize strength. As a proof of concept, cyanoacrylate-coated sutures were used to perform a clinically relevant flexor digitorum profundus tendon repair in cadaver tissue. Even with this non-ideal adhesive, the maximum load resisted by repaired cadaveric canine flexor tendon increased by ∼ 17.0% compared to standard repairs without adhesive. To rapidly assess adhesive binding to tendon, we additionally developed a lap shear test method using bovine deep digital flexor tendons as the adherends. Further study is needed to develop a strongly adherent, compliant adhesive within the optimal design space described by the model.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Li, Ruozhang, Dongwu Li et Wenming Zhang. « Modeling of Rate Effects in Detachment of Mushroom-Shaped Adhesive Structures ». Dans ASME 2023 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/imece2023-112383.

Texte intégral
Résumé :
Abstract Gecko-inspired fibrillar adhesives have attracted much attention and have good application prospects in many fields. Rate-dependent adhesion of the fibrillar adhesives is a commonly observed but less discussed issue, particularly for mushroom-shaped structures. Mushroom-shaped structures have become a popular design in recent ten years due to the optimal interfacial stress and thus better adhesion performance than the traditional flat-ended structure. However, the rate-dependent adhesion in mushroom-shaped structures is far less known. In this study, we do a preliminary study with a focus on the influence of retraction velocity on the pull-off force of the mushroom-shaped adhesive structure. Two mechanical models corresponding to two typical crack propagation modes (center crack and edge crack), respectively, are established to describe the pull-off dynamics. It is found that the pull-off force-velocity relation shows a power law at large velocities for both two crack propagation modes. The power exponent is about 0.2, almost the same for both modes, when the power exponent in the Gent-Schultz law is equal to 0.5. This power exponent value is found to be consistent with experiments. This study would provide theoretical insight into the rate-dependent adhesion of mushroom-shaped adhesive structures and promote optimal designs in related applications.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Ying Wang, Xiaoqun Mo, Donghai Wang et Xiuzhi Susan Sun. « Soy Protein Adhesive Performance Enhanced by Crosslink ». Dans 2006 Portland, Oregon, July 9-12, 2006. St. Joseph, MI : American Society of Agricultural and Biological Engineers, 2006. http://dx.doi.org/10.13031/2013.21548.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Li, C. J., G. J. Yang et A. Ohmori. « Improvement of the Properties of Thermally Sprayed Ceramic Coating by the Infiltration of the Adhesives ». Dans ITSC2003, sous la direction de Basil R. Marple et Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p1311.

Texte intégral
Résumé :
Abstract Thermally sprayed ceramic coating consists generally of porosity up to over ten percent. The existence of voids in the coating will degrade mechanical performance and corrosion resistance. The infiltration technique has been used to enhance the coating performance. In the present work, the adhesives of high strength are used as infiltrator for plasma sprayed alumina coatings to investigate the effect of the infiltration on the adhesive strength and erosion resistance. The adhesive strength of coating after infiltration is tested following ASTM-C-633 standard with the same adhesive. The commercial adhesives used are liquid types of adhesives. Alumina coatings are deposited by plasma spraying to a thickness about 500ìm. The adhesive strength of as-sprayed coating was tested using another epoxy resin adhesive. The test pieces are prepared without infiltration of adhesive into the coating. The results revealed that the infiltration of adhesive to alumina coating can improve significantly the adhesive strength and erosion resistance. The adhesive strength from 40 to 55 MPa can be obtained in spite of deposition conditions. The erosion resistance of the coating at 90 degrees can be improved by a factor about 3.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Zolotarev, V. A. « Adhesive activity of bitumen with adhesion agent and its influence on asphalt concrete water-resistance ». Dans Sixth International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials. RILEM Publications SARL, 2003. http://dx.doi.org/10.1617/2912143772.021.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Qiao, Yao, Seunghyun Ko, Avik Samanta, Daniel R. Merkel, Yongsoon Shin, Anthony Guzman, Ethan K. Nickerson, Jose L. Ramos et Kevin L. Simmons. « A Micro-Scale Numerical Investigation of Internal and Interfacial Void Defects in Adhesive on Failure Behavior of Adhesively-Bonded Materials With Rough Surfaces ». Dans ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/ssdm2023-105653.

Texte intégral
Résumé :
Abstract This paper studied the effects of air void defects on the failure behavior of adhesively-bonded materials under global shear via micro-scale computational modeling. The numerical results indicated that interfacial void defects can largely facilitate interfacial debonding of a weaker adherend/adhesive interface under shear. However, this is not the case for a stronger adherend/adhesive interface, showing the reduction on the nominal shear strength of an adhesive joint is mainly due to internal void defects. The reduced bonding performance due to voids can be improved by leveraging an appropriate surface roughness. This preliminary investigation is a first step to better understand the micro-mechanics of inter-facial failure in the adhesion of a roughened/patterned adherend via surface modification(s) and an adhesive, and also shows the importance of minimizing interfacial void defects in particular at a weaker adherend/adhesive interface via different techniques.
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Adhesive performance"

1

Sun, X. S., Donghai Wang et Zhikai Zhong. Adhesion Performance of Modified Soy Protein Adhesive. Fort Belvoir, VA : Defense Technical Information Center, janvier 2001. http://dx.doi.org/10.21236/ada414303.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Broughton, W. R. Durability performance of adhesive joints. National Physical Laboratory, juin 2023. http://dx.doi.org/10.47120/npl.mgpg28.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Robinson, W., Jesse Doyle et James Harrison. Laboratory tensile performance of joint adhesive for asphalt pavements. Engineer Research and Development Center (U.S.), avril 2019. http://dx.doi.org/10.21079/11681/32546.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Grendahl, Scott M., Wai K. Chin et Clinton Isaac. Adhesive Bonding Performance of Aerospace Materials Prepared With Alternative Solvents. Fort Belvoir, VA : Defense Technical Information Center, novembre 2001. http://dx.doi.org/10.21236/ada397160.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Stubbers, Robert, Brian Jurczyk et Ivan Shchelkanov. Atmospheric Cold Plasma Jet Coating and Surface Treatment for Improved Adhesive Bonding Performance of Dissimilar Material Joints Subject to Harsh Environmental Exposure. Office of Scientific and Technical Information (OSTI), janvier 2022. http://dx.doi.org/10.2172/1868185.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Doyle, Jesse D., Nolan R. Hoffman et M. Kelvin Taylor. Aircraft Arrestor System Panel Joint Improvement. U.S. Army Engineer Research and Development Center, août 2021. http://dx.doi.org/10.21079/11681/41342.

Texte intégral
Résumé :
Aircraft Arresting Systems (AAS) for military applications utilize sacrificial panels made of Ultra-High Molecular Weight polyethylene (UHMWPE) that are embedded into the pavement beneath the AAS cable to protect the pavement from cable damage. Problems have been observed with the materials and practices used to seal the UHMWPE panel joints from water and debris. Data obtained from laboratory and field studies were used make improvements to current practice for sealing UHMWPE panel joints. The study evaluated four joint-sealant materials, eight alternative surface treatment and preparation techniques to promote adhesion to UHMWPE, and seven joint-edge geometries. Bond-strength testing of joint-sealant specimens was conducted in the laboratory, followed by field evaluation of construction techniques. Field performance of the joint systems was monitored for 24 months after installation. Additionally, a thermal response model was developed to refine the joint design dimensions. Results confirmed that the best material to use was self-leveling silicone joint sealant. It was recommended that a dovetail groove be cut into the edge of UHMW panels to provide positive mechanical interlock and to reduce adhesive failures of the sealant. It was also recommended that the panel-to-panel joint-sealant reservoir be widened to prevent sealant compression damage.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Hood, Patrick J. High-Performance Liquid Crystal Adhesives. Fort Belvoir, VA : Defense Technical Information Center, avril 1999. http://dx.doi.org/10.21236/ada363644.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Deming, Timothy J. High Performance Underwater Adhesives : Synthetic Analogs of Marine Mussel Cement Proteins. Fort Belvoir, VA : Defense Technical Information Center, mai 1997. http://dx.doi.org/10.21236/ada325641.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Koenig, Jack L., et Shari L. Tidrick. Improved Adhesion Performance of Polyamid Fibers in Fiber-Reinforced Composites. Fort Belvoir, VA : Defense Technical Information Center, mai 1989. http://dx.doi.org/10.21236/ada207979.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Bruce. L52273 Internal Repair of Pipelines. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), décembre 2005. http://dx.doi.org/10.55274/r0010287.

Texte intégral
Résumé :
External, corrosion-caused loss of wall thickness is the most common cause of repair for gas transmission pipelines. To prevent an area of corrosion damage from causing a pipeline to rupture, the area containing the corrosion damage must be reinforced. Since corrosion is a time dependent process, as pipelines become older, more repairs are required. Repair methods that can be applied from the inside of a gas transmission pipeline (i.e., trenchless methods) are an attractive alternative to conventional repair methods since pipeline excavation is precluded. This is particularly true for pipelines in environmentally sensitive and highly populated areas. Hydrostatic pressure testing was conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, weld deposition, an adhesively bonded steel patch, and adhesively bonded/helically wound steel strip. To benchmark pipeline material performance, additional pipe sections were evaluated in the virgin and in the corrosion damaged/un-repaired conditions. Three repair technologies exhibited burst pressures that were greater than the burst pressures of the un-repaired pipe sections: adhesively bonded/helically wound steel strip repair exhibited the highest performance with burst pressures ranging from 0.4% to 144% higher; carbon fiber-reinforced liner repair had burst pressures ranging from 4% to 17% higher; and glass fiber-reinforced liner repair had burst pressures ranging from 1% to 7% higher. Two repair technologies exhibited burst pressures that were lower than the burst pressures of the un-repaired pipe sections: adhesively bonded steel patch repair was 1% lower and weld deposition repair was10% lower.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Adhesive performance » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie