Se connecter

Bibliographies thématiques / American Smelting and Refining Company / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : American Smelting and Refining Company.

Articles de revues sur le sujet « American Smelting and Refining Company »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 28 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 38 meilleurs articles de revues pour votre recherche sur le sujet « American Smelting and Refining Company ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Tollestrup, Kristine, Floyd J. Frost, Lycy C. Harter, and Garnett P. McMillan. "Mortality among Children Residing near the American Smelting and Refining Company (ASARCO) Copper Smelter in Ruston, Washington." Archives of Environmental Health: An International Journal 58, no. 11 (2003): 683–91. http://dx.doi.org/10.3200/aeoh.58.11.683-691.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Gámez, Moisés, and Gerardo Rodríguez Contreras. "Praxis empresarial y paternalismo industrial en la metalurgia San Luis Potosí en la primera mitad del siglo XX." Revista de El Colegio de San Luis 11, no. 22 (2021): 1–32. http://dx.doi.org/10.21696/rcsl112220211299.

Texte intégral

Résumé :

El objetivo de este trabajo es analizar las estrategias de gestión paternalista implementadas por la American Smelting and Refining Company en San Luis Potosí (México). Se plantea que estas se asocian a la expresión espacial de las relaciones tanto productivas como extralaborales. Se mencionan los vínculos entre la praxis empresarial y la configuración de un espacio urbano de control como el barrio obrero en las inmediaciones de la planta. Se determina que el control social se expresó a partir de la asistencia social y la medicina del trabajo, la educación, la intervención en festividades reli

Styles APA, Harvard, Vancouver, ISO, etc.

3

Ali, Maytham Mahmood, and Rabiha Saleh Yassen. "Recovery of Aluminum from Industrial Waste (Slag) by Melting and Electrorefining Processes." Al-Khwarizmi Engineering Journal 14, no. 3 (2018): 81–91. http://dx.doi.org/10.22153/https://doi.org/10.22153/kej.2018.03.002.

Texte intégral

Résumé :

Slag of aluminum is a residue which results during the melting process of primary and secondary aluminum production. Salt slag of aluminum is hazardous solid waste according to the European Catalogue for Hazardous Wastes. Hence, recovery of aluminum not only saves the environment, but also has advantages of financial and economic returns. In this research, aluminum was recovered and purified from the industrial wastes generated as waste from both of State Company for Electrical and Electronic Industries (Baghdad/AlWaziriya) and General Company for Mechanical Industries (Babylon/-Al-Escandria).

Styles APA, Harvard, Vancouver, ISO, etc.

4

Ali, Maytham Mahmood, and Rabiha Saleh Yassen. "Recovery of Aluminum from Industrial Waste (Slag) by Melting and Electrorefining Processes." Al-Khwarizmi Engineering Journal 14, no. 3 (2018): 81–91. http://dx.doi.org/10.22153/kej.2018.03.002.

Texte intégral

Résumé :

Slag of aluminum is a residue which results during the melting process of primary and secondary aluminum production. Salt slag of aluminum is hazardous solid waste according to the European Catalogue for Hazardous Wastes. Hence, recovery of aluminum not only saves the environment, but also has advantages of financial and economic returns. In this research, aluminum was recovered and purified from the industrial wastes generated as waste from both of State Company for Electrical and Electronic Industries (Baghdad/AlWaziriya) and General Company for Mechanical Industries (Babylon/-Al-Escandria).

Styles APA, Harvard, Vancouver, ISO, etc.

5

Zhao, Ding Guo, Shu Huan Wang, and He Jun Zhang. "Research on the Control of Oxide and Nitride Inclusions in Steelmaking." Applied Mechanics and Materials 189 (July 2012): 40–43. http://dx.doi.org/10.4028/www.scientific.net/amm.189.40.

Texte intégral

Résumé :

The contents of oxygen and nitrogen were important effect on the high speed wire in smelting high carbon steel. Sampled from the process of producing wire rod in Xuanhua iron and steel company and analyzed the contents of oxygen and nitrogen. The quality and size of oxide and nitride were numerical statement in differernt terms. The results were shown that the size of micro inclusion was less than 15 μm, and the inclusion size was not big, but the quantity was large. The quantity of micro inclusions in wire rod was about 10 /mm2 (equivalent diameter of 5 μm). Through the practice analysis and

Styles APA, Harvard, Vancouver, ISO, etc.

6

Feng, Hai Xia, Jun Liu, and Yi Wei. "Application of Alumina-Magnesia Precast Blocks for LF Refining Ladle." Materials Science Forum 745-746 (February 2013): 594–98. http://dx.doi.org/10.4028/www.scientific.net/msf.745-746.594.

Texte intégral

Résumé :

The alumina-magnesia precast blocks developed in authors company have been successfully used in 90-ton LF refining with an average service life 80-85 heats to meet the smelting demand of low carbon steel and ultra low carbon steel. The observation of the residual blocks revealed that the section of the used blocks was divided into four layers from inside to the surface, i.e., slag layer, reaction layer, penetration layer and the original block. It has been found that there was a certain degree of structure spalling of the used blocks. The main factor of blocks damage may be due to the penetrat

Styles APA, Harvard, Vancouver, ISO, etc.

7

Roberts, Robin S., James A. Julian, Daniel Sweezey, David C. F. Muir, Harry S. Shannon, and Ernest Mastromatteo. "A Study of Mortality in Workers Engaged in the Mining, Smelting, and Refining of Nickel: I: Methodology and Mortality by Major Cause Groups." Toxicology and Industrial Health 5, no. 6 (1985): 957–74. http://dx.doi.org/10.1177/074823378900500605.

Texte intégral

Résumé :

Following the publication of the NIOSH nickel criteria document in 1977, the Joint Occupational Health Committee of the International Nickel Company (INCO) commissioned a mortality study of the company's Ontario workforce. This paper describes the detailed methodology and primary mortality results of the ensuing study; subsequent papers will describe more detailed findings of cause-specific mortality. An historical prospective mortality study of approximately 54,000 INCO workers has been conducted. Men with six months or more of service were followed for mortality during a 35-year period by co

Styles APA, Harvard, Vancouver, ISO, etc.

8

Bricker, Robert, and Kevin Brown. "THE USE OF HISTORICAL DATA IN ACCOUNTING RESEARCH: THE CASE OF THE AMERICAN SUGAR REFINING COMPANY." Accounting Historians Journal 24, no. 2 (1997): 1–24. http://dx.doi.org/10.2308/0148-4184.24.2.1.

Texte intégral

Résumé :

In 1908, the American Sugar Refining Company (ASR) reversed its long-held policy of secrecy as to its financial condition and performance. Prior work, applying contemporary capital market methods to ASR security price data of that period, has suggested a value to ASR shareholders of this policy reversal. This paper examines the historical record of that time and presents additional evidence on this matter, particularly in terms of identifying potentially confounding events occurring during the period under study. The results of this analysis suggest a difficulty in attributing observed abnorma

Styles APA, Harvard, Vancouver, ISO, etc.

9

Mammadov, Arif, Aqil Babayev, Nizami Ismayilov, Muxtar Huseynov, and Faiq Guliyev. "Improvement of Production Processes of Seamless Steel Pipes for Oil and Gas Production." Key Engineering Materials 979 (April 5, 2024): 63–71. http://dx.doi.org/10.4028/p-i7keoa.

Texte intégral

Résumé :

The article discusses the features of improving the technological processes of electric smelting, out-of-furnace processing, continuous casting and heat treatment of steel pipe blanks used for oil and gas production. To this end, ways to improve steel processing processes in electric furnaces and non-furnaces were shown, processes for the production of continuous casting pipes with special properties for oil and gas production were studied, the design of an alloying-refining lance (LRF) was developed, refining processes by blowing magnesium-based powders were studied, heat treatment modes for

Styles APA, Harvard, Vancouver, ISO, etc.

10

Rohman, Moh Ainur Bahtiar, Wildan Suharso, and Evi Dwi Wahyuni. "Business Process Reengineering Sistem Laporan Harian Kru Jalan Pada PO.Pelita Mas." J-SAKTI (Jurnal Sains Komputer dan Informatika) 8, no. 1 (2024): 215. https://doi.org/10.30645/j-sakti.v8i1.780.

Texte intégral

Résumé :

Every company that has employees who sare not gathered in one place must want speed and efficiency for good information exchange. To elevate quality of company management, it is essential to understand the shortcomings of the employees management. Pelita Mas Otobus Company is a bus company based in Malang City, East Java, which conducts its management system still running conventionally. This has shortcomings in terms of efficiency and accuracy of data on information exchange between employees. From the existing issue, it is important to redesign the business processes at Pelita Mas Bus Compan

Styles APA, Harvard, Vancouver, ISO, etc.

11

Sánchez-Alvarracín, Carlos, Jessica Criollo-Bravo, Daniela Albuja-Arias, Fernando García-Ávila, and M. Pelaez-Samaniego. "Characterization of Used Lubricant Oil in a Latin-American Medium-Size City and Analysis of Options for Its Regeneration." Recycling 6, no. 1 (2021): 10. http://dx.doi.org/10.3390/recycling6010010.

Texte intégral

Résumé :

Petroleum-derived products, such as lubricant oils, are non-renewable resources that, after use, must be collected and processed properly to avoid negative environmental impacts. A circular economy of used oils requires the re-refining and reuse of the same. Similar to most countries in Latin America, the management of used oils in Ecuador is still incipient and few cities collect and treat this material properly. In Cuenca, the ETAPA company collects ~1344 t/year of used oils, which are subjected to pretreatment operations prior to their use as fuel in a cement factory. However, combustion ge

Styles APA, Harvard, Vancouver, ISO, etc.

12

Dallett, Nancy, and Matthew Guebard. "Crooked River." Public Historian 38, no. 4 (2016): 56–78. http://dx.doi.org/10.1525/tph.2016.38.4.56.

Texte intégral

Résumé :

The story of Tuzigoot National Monument, in Arizona’s Verde Valley, is that of a small town taking pride in its ancestral Native American history, securing funds from a mining company and the federal government to excavate a hilltop ruin associated with local tribes, and developing heritage tourism during the Great Depression. Its development, however, was dependent on military campaigns that drove Yavapai and Apache people on to the San Carlos Reservation. Today, despite evidence of environmental degradation caused by industrial-scale mining and smelting during the nineteenth and twentieth ce

Styles APA, Harvard, Vancouver, ISO, etc.

13

Porter, Burt, Kumar Sivakumar, and Gregory Waymire. "Disclosure Policies and Shareholder Wealth in the Early Twentieth Century: The Case of the American Sugar Refining Company." Journal of Accounting, Auditing & Finance 10, no. 1 (1995): 121–45. http://dx.doi.org/10.1177/0148558x9501000110.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

Pérez-Jiménez, Sol. "Impacto ambiental de la Compañía minera Southern Perú Cooper Corporation en América Latina: Una aproximación histórica de comienzos del siglo XX a la actualidad." Revista Geográfica de América Central 3, no. 61E (2018): 489–503. http://dx.doi.org/10.15359/rgac.61-3.25.

Texte intégral

Résumé :

A pesar del reconocimiento de que fue a partir de la década de los 90 y la imposición de normativas neoliberales que se dio un aumento drástico de la extracción minera en América Latina, la Megaminería metálica en la región tiene sus antecedentes desde principios de silgo XX. En el presente artículo revisamos este fenómeno a través de la historia de una de las compañías mineras más importantes de la época, la American Mining and Smelting Company (Asarco), hoy subsidiaria de la compañía minera Grupo México. Que empezó a operar en Perú desde 1921 y, desde entonces, ha expandido su presencia en l

Styles APA, Harvard, Vancouver, ISO, etc.

15

Bross, Benjamin A. "Embodied Contradictions and Post-Industrial Built Environments." Enquiry The ARCC Journal for Architectural Research 20, no. 1 (2023): 20–40. http://dx.doi.org/10.17831/enqarcc.v20i1.1186.

Texte intégral

Résumé :

In October of 2004, the Museo de Medicina Laboral (Museum of Labor Medicine), opened to the public in Real del Monte, State of Hidalgo, Mexico. The museum, located on the grounds of what had been the Hospital Minero (Mining Hospital), was a building complex conceived, built, and operationalized at the height of Mexico’s Industrial Revolution and the region’s only medical facility specializing in the healthcare needs of miners and their families. Utilizing historical analysis, the hospital reveals contradictions frequently embodied by the era’s Modernist built environments. Inaugurated in 1907,

Styles APA, Harvard, Vancouver, ISO, etc.

16

Purushotham, G., and Joel Hemanth. "Effect of Weight Percentage on Mechanical Properties of Fused Silica Particulate Reinforced Nickel Alloy (M 35-1) Composite, with Influence of Chills." Applied Mechanics and Materials 592-594 (July 2014): 245–49. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.245.

Texte intégral

Résumé :

History is often marked by the materials and technology that reflect human capability and understanding. Many a times scales begins with the stone age, which led to the bronze, iron, steel, aluminium and alloy ages as improvements in refining, smelting took place. Science made all these possible to move towards finding more advanced materials.Therefore in the present research work, an investigation has been carried out to fabricate and evaluate the microstructure, strength, micro hardness of chilled composites consisting of nickel matrix and fused SiO2particles as the reinforcement (size 40-15

Styles APA, Harvard, Vancouver, ISO, etc.

17

Polishko, Serhii. "Complex effect of sulfur and phosphorus on the characteristics of wheel steel of KP-T brand before and after modification." Technology audit and production reserves 2, no. 1(58) (2021): 11–14. http://dx.doi.org/10.15587/2706-5448.2021.229163.

Texte intégral

Résumé :

The object of the research is KP-2 wheel steel modified by the Al-Mg-Si-Fe-C-Ca-Ti-Ce system. One of the most problematic places in the smelting of modern steel is the stability of the chemical composition due to the use of uncontrolled content of scrap, charge and standard modifiers, which are made by the fused method. To eliminate this problem, multifunctional modifiers were used during the study. This is due to the fact that the KP-2 steel modification method proposed in this article, has a number of features. In this case, the influence modifiers of multifunctional action on the installati

Styles APA, Harvard, Vancouver, ISO, etc.

18

Inaba, Kazuya. "The Common Integration The Group Operation of Petrochemical Complexes in Japan." Journal on Innovation and Sustainability. RISUS ISSN 2179-3565 5, no. 1 (2014): 94. http://dx.doi.org/10.24212/2179-3565.2014v5i2p94-102.

Texte intégral

Résumé :

Oil and petrochemical companies are in the severe situation where they shoulddeal with various problems. In Europe, America, the Middle East, and East Asia (China, Taiwan,and South Korea), one company usually builds a large-scale factory, and consistently producesoil and petrochemical goods in the system of one company. Differently from it, two or morecompanies are concentrated in the coast landfills in Japan, and generally manufacture in thesystem of groups. The system of production in a petrochemical complex would be a mediumscalelevel if it sees worldwide. After World War II, capital was in

Styles APA, Harvard, Vancouver, ISO, etc.

19

Serhii, Polishko. "Complex effect of sulfur and phosphorus on the characteristics of wheel steel of KP-T brand before and after modification." Technology audit and production reserves 2, no. 1(58) (2021): 11–14. https://doi.org/10.15587/2706-5448.2021.229163.

Texte intégral

Résumé :

<em>The object of the research is KP-2 wheel steel</em> <em>modified by the Al-Mg-Si-Fe-C-Ca-Ti-Ce system.</em> <em>One of the most problematic places in the smelting of modern steel is the stability of the chemical composition due to the use of uncontrolled content of scrap, charge and standard modifiers, which are made by the fused method.</em> <em>To eliminate this problem, multifunctional modifiers were used during the study. This is due to the fact that the KP-2 steel modification method proposed in this article</em><em>,</em><em> has a number of features. In this case, the

Styles APA, Harvard, Vancouver, ISO, etc.

20

Serhii, Polishko. "Effect of processing at the steel vacuum processing unit (SVPU) on desulfurization of unmodified and modified KP-2 steel." Technology audit and production reserves 1, no. 3(45) (2019): 4–8. https://doi.org/10.15587/2312-8372.2019.157676.

Texte intégral

Résumé :

<em>The object of the research is the processes of statistical processing of the chemical composition of KP-2 wheel steel. One of the most problematic places in the smelting of modern steel is the stability of the chemical composition due to the use of uncontrolled content of scrap, charge and standard modifiers, which are made by the fused method.</em> <em>To eliminate this problem, multifunctional modifiers were used during the study. This is due to the fact that the KP-2 steel modification method proposed in this article has a number of features. In this case, the influence modifiers of mul

Styles APA, Harvard, Vancouver, ISO, etc.

21

Popov, N. A., Yu A. Ivanov, V. K. Skorkin, and V. Yu Sidorova. "Innovative technologies of dairy cattle reproduction." Glavnyj zootehnik (Head of Animal Breeding), no. 6 (June 1, 2021): 20–29. http://dx.doi.org/10.33920/sel-03-2106-03.

Texte intégral

Résumé :

The American company for the reproduction of dairy cattle – World Wide Sires was formed in 1976 in the United States, and its subsidiary World Wide Sires Russia – in 2006 in the Russian Federation. Over the past decades the average milk yield of cows has been increased significantly, but their fertility has been decreased. A comparison of the DNA of cows producing about 20,000 kg of milk and more than 1,000 kg of milk fat per lactation has shown a genetic association between the milk yield of cows and the fertility of breeding sires. Therefore, one of the directions of the company’s developmen

Styles APA, Harvard, Vancouver, ISO, etc.

22

Boschee, Pam. "Comments: Pricing Index Launched for “Black Mass”." Journal of Petroleum Technology 75, no. 05 (2023): 8–9. http://dx.doi.org/10.2118/0523-0008-jpt.

Texte intégral

Résumé :

As an indicator of the evolving global energy marketplace, recycled battery metals just earned their own spot pricing assessments for China and Europe. S&P Global Commodity Insights launched nine new daily “black mass” evaluations last month “to bring greater transparency to pricing of the battery raw materials market.” These complement its existing suite of daily battery metals assessments. The hunt is ongoing, and escalating, for virgin sources of metals such as lithium, manganese, cobalt, and nickel for use in lithium-ion batteries ranging from those in watches and devices to utility-sc

Styles APA, Harvard, Vancouver, ISO, etc.

23

"ALUMINUM ALLOY 383.1." Alloy Digest 40, no. 7 (1991). http://dx.doi.org/10.31399/asm.ad.al0318.

Texte intégral

Résumé :

Abstract Aluminum Alloy 383.1 is a controlled copper content aluminum die casting alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance. Filing Code: Al-318. Producer or source: Aluminum Smelting and Refining Company Inc..

Styles APA, Harvard, Vancouver, ISO, etc.

24

"ALUMINUM ALLOY 360." Alloy Digest 39, no. 10 (1990). http://dx.doi.org/10.31399/asm.ad.al0308.

Texte intégral

Résumé :

Abstract Aluminum Alloy 360 is a hypoeutectoid aluminum silicon die cast alloy with restricted copper content. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance as well as casting. Filing Code: Al-308. Producer or source: Aluminum Smelting and Refining Company Inc..

Styles APA, Harvard, Vancouver, ISO, etc.

25

"ALUMINUM ALLOY 443." Alloy Digest 40, no. 4 (1991). http://dx.doi.org/10.31399/asm.ad.al0315.

Texte intégral

Résumé :

Abstract Aluminum Alloy 443 is a restricted copper content (0.6% max.) die casting alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-315. Producer or source: Aluminum Smelting and Refining Company Inc..

Styles APA, Harvard, Vancouver, ISO, etc.

26

"ALLOY 380." Alloy Digest 40, no. 1 (1991). http://dx.doi.org/10.31399/asm.ad.al0311.

Texte intégral

Résumé :

Abstract ALLOY 380 is an aluminum/silicon die casting alloy with controlled copper content (3-4%). This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting and heat treating. Filing Code: Al-311. Producer or source: Aluminum Smelting and Refining Company Inc..

Styles APA, Harvard, Vancouver, ISO, etc.

27

"ALUMINUM ALLOY 390." Alloy Digest 40, no. 3 (1991). http://dx.doi.org/10.31399/asm.ad.al0313.

Texte intégral

Résumé :

Abstract ALUMINUM ALLOY 390 is an aluminum die casting alloy with a controlled copper content of 4.0-5.0%. It is the most notable hypereutectic alloy of the aluminum-silicon series. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-313. Producer or source: Aluminum Smelting and Refining Company Inc..

Styles APA, Harvard, Vancouver, ISO, etc.

28

"ZA-8." Alloy Digest 39, no. 1 (1990). http://dx.doi.org/10.31399/asm.ad.zn0048.

Texte intégral

Résumé :

Abstract ZA-8 is a hypereutectic zinc-aluminum,highperformance die casting alloy. It is one of a family of three ZA Alloys which can be economically die cast with properties surpassing conventional zinc or aluminum alloys. It is the lowest aluminum content alloy of the family and it has the lowest melting point and casting temperature range. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as

Styles APA, Harvard, Vancouver, ISO, etc.

29

"ZA-12." Alloy Digest 39, no. 5 (1990). http://dx.doi.org/10.31399/asm.ad.zn0049.

Texte intégral

Résumé :

Abstract ZA-12 is the intermediate member of the family of three ZA die-casting alloys. Its melting point, solidification range and recommended casting-temperature range are greater than those of ZA-8. (See Alloy Digest Zn-48, January 1990). Due to these factors, ZA-12 must be die cast in cold chamber die-casting machines like conventional aluminum die-casting alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corr

Styles APA, Harvard, Vancouver, ISO, etc.

30

"ZA-27." Alloy Digest 39, no. 6 (1990). http://dx.doi.org/10.31399/asm.ad.zn0050.

Texte intégral

Résumé :

Abstract ZA-27 is the strongest, hardest and lightest of the three-member ZA alloy group (see also ZA-8, Alloy Digest Zn-48, January 1990, and ZA-12, Alloy Digest Zn-49, May 1990). Mechanical properties of ZA-27 compare favorably with many heavier more costly (manufacturing intensive) alloys such as malleable and ductile iron, manganese and aluminum bronzes and many ferrous and nonferrous wrought alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue.

Styles APA, Harvard, Vancouver, ISO, etc.

31

Santos, Lisia Maria Gobbo dos, Santos Alves Vicentini Neto, Giovanna Iozzi, and Silvana do Couto Jacob. "Arsenic, cadmium and lead concentrations in Yerba mate commercialized in Southern Brazil by inductively coupled plasma mass spectrometry." Ciência Rural 47, no. 12 (2017). http://dx.doi.org/10.1590/0103-8478cr20170202.

Texte intégral

Résumé :

ABSTRACT: “Mate” or “Yerba Mate” (Ilex paraguariensis) is a native South American plant, commonly consumed in Argentina, Paraguay, Uruguay and southern Brazil. Recent research has detected the presence of many vitamins and metals in this plant. Theses metals are also part of yerba mate’s mineral composition, due to soil and water contamination by pesticides and fertilizers, coal and oil combustion, vehicle emissions, mining, smelting, refining and the incineration of urban and industrial waste. Regardless of their origin, some inorganic elements, such as arsenic, cadmium and lead, are consider

Styles APA, Harvard, Vancouver, ISO, etc.

32

Lestari, Intan, Mahra Mahraja, Faizar Farid, Diah Rizki Gusti, and Edwin Permana. "PENYERAPAN ION Pb(II) MENGGUNAKAN ADSORBEN DARI LIMBAH PADAT LUMPUR AKTIF PENGOLAHAN AIR MINUM." CHEMISTRY PROGRESS 13, no. 2 (2020). http://dx.doi.org/10.35799/cp.13.2.2020.31391.

Texte intégral

Résumé :

Timbal merupakan salah satu polutan yang paling banyak digunakan dalam beberapa kegiatan industri seperti penambangan, peleburan, pemurnian minyak bumi, percetakan, produksi pigmen, dan pembuatan baterai. Permasalahan logam berat dapat ditanggulangi dengan penurunan kadar logam berat menggunakan teknik penyerapan. Salah satu adsorben yang digunakan untuk penyerapan ion Pb(II) adalah limbah padat lumpur aktif dari pengolahan air minum. Penelitian ini bertujuan untuk menggunakan limbah padat lumpur aktif yang di ambil dari sisa pengolahan air minum PDAM Tirta Mayang Jambi dan diaktifasi mengguna

Styles APA, Harvard, Vancouver, ISO, etc.

33

Eslamidoost, Zahra, Morteza Arabzadeh, Vahide Oskoie, et al. "Dispersion of NO2 pollutant in a gas refinery with AERMOD model: A case study in the Middle East." Journal of Air Pollution and Health, September 6, 2022. http://dx.doi.org/10.18502/japh.v7i3.10544.

Texte intégral

Résumé :

Introduction: Air pollution from industrial sources is a growing problem increasing the amount of air pollution by emitting various gaseous pollutants such as Nitrogen Oxides (NOx). This study analyzed Nitrogen dioxide (NO2) emissions using American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) from the stacks and flares of a gas refinery in the Middle East. Materials and methods: The NO2 emissions were measured from the stacks and flare of the refinery (231 samples). The distribution of emissions was investigated over a statistical period of 1 year for

Styles APA, Harvard, Vancouver, ISO, etc.

34

Leaver, Tama. "The Social Media Contradiction: Data Mining and Digital Death." M/C Journal 16, no. 2 (2013). http://dx.doi.org/10.5204/mcj.625.

Texte intégral

Résumé :

Introduction Many social media tools and services are free to use. This fact often leads users to the mistaken presumption that the associated data generated whilst utilising these tools and services is without value. Users often focus on the social and presumed ephemeral nature of communication – imagining something that happens but then has no further record or value, akin to a telephone call – while corporations behind these tools tend to focus on the media side, the lasting value of these traces which can be combined, mined and analysed for new insight and revenue generation. This paper se

Styles APA, Harvard, Vancouver, ISO, etc.

35

Gantley, Michael J., and James P. Carney. "Grave Matters: Mediating Corporeal Objects and Subjects through Mortuary Practices." M/C Journal 19, no. 1 (2016). http://dx.doi.org/10.5204/mcj.1058.

Texte intégral

Résumé :

IntroductionThe common origin of the adjective “corporeal” and the noun “corpse” in the Latin root corpus points to the value of mortuary practices for investigating how the human body is objectified. In post-mortem rituals, the body—formerly the manipulator of objects—becomes itself the object that is manipulated. Thus, these funerary rituals provide a type of double reflexivity, where the object and subject of manipulation can be used to reciprocally illuminate one another. To this extent, any consideration of corporeality can only benefit from a discussion of how the body is objectified thr

Styles APA, Harvard, Vancouver, ISO, etc.

36

Khamis, Susie. "Nespresso: Branding the "Ultimate Coffee Experience"." M/C Journal 15, no. 2 (2012). http://dx.doi.org/10.5204/mcj.476.

Texte intégral

Résumé :

Introduction In December 2010, Nespresso, the world’s leading brand of premium-portioned coffee, opened a flagship “boutique” in Sydney’s Pitt Street Mall. This was Nespresso’s fifth boutique opening of 2010, after Brussels, Miami, Soho, and Munich. The Sydney debut coincided with the mall’s upmarket redevelopment, which explains Nespresso’s arrival in the city: strategic geographic expansion is key to the brand’s growth. Rather than panoramic ubiquity, a retail option favoured by brands like McDonalds, KFC and Starbucks, Nespresso opts for iconic, prestigious locations. This strategy has been

Styles APA, Harvard, Vancouver, ISO, etc.

37

Stewart, Michelle. "Smooth Effects: The Erasure of Labour and Production of Police as Experts through Augmented Objects." M/C Journal 16, no. 6 (2013). http://dx.doi.org/10.5204/mcj.746.

Texte intégral

Résumé :

It’s a cool autumn morning and I am grateful for the sun as it warms the wet concrete. I have been told we will be spending some time outside later, so I am hopeful it will remain sunny. When everyone arrives, we go directly to the principal’s office. Once inside, someone points at the PA system. People pull out their cameras and take a quick photo—we were told the PA system in each school can be different so information about the broadcasting mechanism could be helpful in an emergency. I decide to take a photo as well. Figure 1: PA system inside the principal's office (Photo by Michelle Stewa

Styles APA, Harvard, Vancouver, ISO, etc.

38

Ellison, Elizabeth. "The #AustralianBeachspace Project: Examining Opportunities for Research Dissemination Using Instagram." M/C Journal 20, no. 4 (2017). http://dx.doi.org/10.5204/mcj.1251.

Texte intégral

Résumé :

IntroductionIn late 2016, I undertook a short-term, three-month project to share some of my research through my Instagram account using the categorising hashtag #AustralianBeachspace. Much of this work emerged from my PhD thesis, which is being published in journal articles, but has yet to be published in any accessible or overarching way. I wanted to experiment with the process of using a visual social media tool for research dissemination. I felt that Instagram’s ability to combine text and image allowed for an aesthetically interesting way to curate this particular research project. My rese

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!