Bibliographies thématiques / Base fiber

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Base fiber »

Auteur : Grafiati

Publié le 2 juin 2025

Mis à jour le 31 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Base fiber ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Base fiber"

Rubio, J., F. Rubio, J. L. Fierro, M. C. Gutierrez, and J. L. Oteo. "Surface characterization of carbon fibers by inverse gas chromatography at low pressures." Journal of Materials Research 17, no. 2 (2002): 413–22. http://dx.doi.org/10.1557/jmr.2002.0058.

Texte intégral

Résumé :

Carbon fiber surfaces were analyzed by inverse gas chromatography (IGC) and x-ray photoelectron spectroscopy (XPS). IGC measurements were carried out at infinite and finite dilution by using neutral and specific probes. At infinite dilution the dispersive component of the surface free energy and the acid–base indexes were obtained. At finite dilution the energy distribution functions were calculated. Three carbon fibers were analyzed, one untreated and two fibers treated with different sizings. The fibers have similar dispersive components of surface free energy but their acid–base characteris

Styles APA, Harvard, Vancouver, ISO, etc.

Chen, Dar-Hao, Younho Rew, Anand Bajarang Tapase, and William Crockford. "Experimental study of base stabilization with fibrillated fiber." International Journal of Pavement Research and Technology 13, no. 6 (2020): 591–600. http://dx.doi.org/10.1007/s42947-020-6005-6.

Texte intégral

Résumé :

AbstractPotential benefits in applying polypropylene fiber to stabilize expansive soils and cement treated bases is already been reported in previous studies. So a critical need exists to incorporate the use of fiber into the Texas Department of Transportation’s (TxDOT’s) Guidelines for Modification and Stabilization of Soils and Base for Use in Pavement Structures. The present paper discusses the results collected from the first experimental test section on FM897 in the TxDOT Paris District. Three 500-ft (152.4m) test sections were constructed with 2 percent cement on FM897 in February 2020 i

Styles APA, Harvard, Vancouver, ISO, etc.

Bagchi, Susmit. "Topological Analysis of Fibrations in Multidimensional (C, R) Space." Symmetry 12, no. 12 (2020): 2049. http://dx.doi.org/10.3390/sym12122049.

Texte intégral

Résumé :

A holomorphically fibred space generates locally trivial bundles with positive dimensional fibers. This paper proposes two varieties of fibrations (compact and non-compact) in the non-uniformly scalable quasinormed topological (C, R) space admitting cylindrically symmetric continuous functions. The projective base space is dense, containing a complex plane, and the corresponding surjective fiber projection on the base space can be fixed at any point on real subspace. The contact category fibers support multiple oriented singularities of piecewise continuous functions within the topological spa

Styles APA, Harvard, Vancouver, ISO, etc.

Long, Robert L., Christopher D. Delhom, and Michael P. Bange. "Effects of cotton genotype, defoliation timing and season on fiber cross-sectional properties and yarn performance." Textile Research Journal 91, no. 17-18 (2021): 1943–56. http://dx.doi.org/10.1177/0040517521992769.

Texte intégral

Résumé :

Cotton fiber cross-sectional properties influence the performance of ring spun yarns. The spinning performance of two Gossypium hirsutum L. Upland cotton genotypes known to have inherently different fiber fineness properties were compared. Genotypes were grown together in field experiments conducted over two growing seasons, and crops were subjected to early and late defoliation treatments. The aim was to quantify the differences in yarn properties following changes targeting fiber fineness properties in isolation from other fiber properties. For the first time, the percentage difference in ya

Styles APA, Harvard, Vancouver, ISO, etc.

Fedorov, Valeriy, and Aleksey Mestnikov. "Influence of cellulose fibers on structure and properties of fiber reinforced foam concrete." MATEC Web of Conferences 143 (2018): 02008. http://dx.doi.org/10.1051/matecconf/201814302008.

Texte intégral

Résumé :

One of the promising means of foamed concrete quality improvement is micro-reinforcement by adding synthetic and mineral fibers to the base mix. This research is the first to investigate peculiarities of using recycled cellulose fiber extracted from waste paper for obtaining fiber reinforced foam concrete. The paper presents results of experimental research on the influence of cellulose fibers on structure and properties of fiber reinforced foam concrete by using methods of chemical analysis and scanning electron microscopy. The research determines peculiarities of new formations appearance an

Styles APA, Harvard, Vancouver, ISO, etc.

Abdulirees Jebur, Mustafa, Seyed Sadra Kashef, Mc Amirani, and M. H. Mezher. "Design and Fabrication an optical sensor devices base on graphene oxide." Data and Metadata 4 (April 1, 2025): 875. https://doi.org/10.56294/dm2025875.

Texte intégral

Résumé :

Contamination of oil, particularly by dissolved water, is a very common problem in the failure of step-down transformers used by electricity providers as this degrades the insulating property of the oil. In this paper, the use of D-shaped optical fibers functionalized with Graphene Oxide is presented to detect the water content in transformer oil. The synthesis of graphene oxide was achieved by a modified version of Hummer's method. Subsequently, the drop-casting process was used to apply the graphene oxide onto the D-shaped fibre. The coating thickness attained in the samples was around 200 n

Styles APA, Harvard, Vancouver, ISO, etc.

Weima, Samuël A. M., Reza Norouzikudiani, Jaeryang Baek, et al. "Human interactive liquid crystal fiber arrays." Science Advances 10 (September 6, 2024): eadp0421. https://doi.org/10.1126/sciadv.adp0421.

Texte intégral

Résumé :

This paper presents interactive liquid crystal fiber arrays that can actuate in a way perceptible by human touch. The fibers are actuated via a computer interface, enabling precise control over actuation direction, magnitude, and frequency. Unlike conventional methods, our technique initiates the actuation at the base of the fibers, which is enabled by fabricating the fibers directly onto an electrical circuit. Fiber actuation is achieved by localized addressing of an in situ formed radially aligned segment. This induces reduction in the scalar order parameter and leads to deformation of the f

Styles APA, Harvard, Vancouver, ISO, etc.

Spyrides, Silvana M. M., Maíra do Prado, Renata Antoun Simão, and Fernando Luis Bastian. "Effect of Plasma and Fiber Position on Flexural Properties of a Polyethylene Fiber-Reinforced Composite." Brazilian Dental Journal 26, no. 5 (2015): 490–96. http://dx.doi.org/10.1590/0103-644020130225.

Texte intégral

Résumé :

Abstract: The aim of this study was to evaluate the effect of plasma treatment using argon and oxygen gases, combined with fiber position on flexural properties of a fiber-reinforced composite. Eleven groups were evaluated, a non-reinforced control group and 10 groups reinforced with InFibra, a woven polyethylene fiber, varying according to the plasma treatment and fiber position. The samples were prepared using a stainless steel two-piece matrix. The three point bending test was performed in an EMIC testing machine. Flexural strength (FS) and flexural deflection (FD) were calculated from init

Styles APA, Harvard, Vancouver, ISO, etc.

Arulmurugan, P. "Evaluation of FRC Beams Using Steel and PVA Fibres in Concrete." International Journal of Advance Research and Innovation 6, no. 4 (2018): 69–77. http://dx.doi.org/10.51976/ijari.641809.

Texte intégral

Résumé :

The conventional concrete is enhanced by the addition of fibers in it. The brittleness in concrete is reduced and the adequate ductility of concrete is ensured by the addition of fibers in concrete. The fibers used are polyvinyl alcohol powders and steel fibers in various volume combinations. The main reason for adding fiber to concrete matrix is to find its compressive strength, split tensile strength, flexural strength and deflection test. The base polyvinyl alcohol is highly resistant to the majority of aggressive agent and will never oxidize when exposed to the condition which causes the s

Styles APA, Harvard, Vancouver, ISO, etc.

Dr., E.N. Ganesh. "Analysis of Fracture and Toughness of a Denture Base with Polyvinyl Fibers." International Journal of Advanced Pharmaceutical Sciences and Research (IJAPSR) 2, no. 2 (2022): 1–4. https://doi.org/10.54105/ijapsr.C4004.022222.

Texte intégral

Résumé :

Abstract: Fracture resistance of polymer reinforced with short fibers consists of a sum of contributions from matrix and fiber fracture, fiber de-bonding and pull-out. The existing models for predicting dependence of fracture toughness on structural variables were derived for the commercially important fiber volume fractions, i.e., for vf≥0.1. In this contribution, modification of the existing model for the dependence of the critical strain energy release rate, GIC, on the fiber type, length and aspect ratio, interfacial adhesion and volume fraction has been attempted to al

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Base fiber"

Ghawas, Muhammad. "Sources picosecondes et femtosecondes à base de fibre dopées Ytterbium et applications." Electronic Thesis or Diss., Bordeaux, 2023. http://www.theses.fr/2023BORD0463.

Texte intégral

Résumé :

Les recherches industrielles ou académiques autour laser délivrant des impulsions ultracourtes reposent de plus en plus sur la technologie des lasers à fibre. Elles s’appuient sur les avantages intrinsèques des systèmes à fibre, tels que leur stabilité, compacité, l'excellente qualité modale du faisceau délivré, leur robustesse et leur facilité d'utilisation. Au cours de ce travail, nous avons réalisé l’étude détaillée d’un laser à fibre délivrant des impulsions picosecondes fonctionnant dans un régime de dispersion normale (ANDi). Ce laser a par la suite été déployé pour étudier de la générat

Styles APA, Harvard, Vancouver, ISO, etc.

Gaffiot, Lauric. "Optimisation d’un procédé d’élaboration d’un composite à base de fibres naturelles." Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAI056.

Texte intégral

Résumé :

Les matériaux composites constituent aujourd’hui un domaine très dynamique tant au niveau de l’industrie que de la recherche. Dans ce cadre, les renforts d’origines naturelles représentent une alternative intéressante aux fibres synthétiques de par leurs propriétés mécaniques élevées, leur faible densité et leur caractère biosourcé, afin de répondre à l’accroissement des niveaux de performances ciblés ainsi qu’aux exigences économiques et écologiques actuelles.Ces travaux s’inscrivent dans un projet regroupant laboratoires de recherche, fournisseurs et end-users, visant à développer un matéria

Styles APA, Harvard, Vancouver, ISO, etc.

Lesparre, Fabien. "Amplificateurs impulsionnels à base de fibres cristallines dopées Ytterbium." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLO001/document.

Texte intégral

Résumé :

Les lasers à impulsions ultra-courtes (< 10 ps) ont largement démontré leur intérêt pour de nombreuses applications scientifiques, industrielles ou encore médicales. Le domaine du micro-usinage par impulsions laser est l'un des domaines les plus actifs du moment. Les dernières avancées en la matière privilégient deux axes de recherche, l'augmentation du taux de répétition associé à de fortes puissances moyennes et une montée en énergie. Nos travaux s'inscrivent dans ce contexte et visent à développer des amplificateurs d'impulsions ultracourtes innovants à base de fibres cristallines Yb:YAG

Styles APA, Harvard, Vancouver, ISO, etc.

Eustache, Clément. "Capteurs fibrés à base d'ondes de surface de Bloch." Electronic Thesis or Diss., Bourgogne Franche-Comté, 2024. http://www.theses.fr/2024UBFCD028.

Texte intégral

Résumé :

La détection et l'analyse de faibles quantités physiques, chimiques ou biologiques, in situ, dans des environnements difficiles d'accès, a un impact important dans de nombreux domaines scientifiques, médicaux et industriels. Même s'il est l'un des meilleurs éléments en termes de miniaturisation pour relever ce défi, le concept de "Lab-on-tip", cloisonné au cœur de la fibre, présente une résolution de détection restreinte. L'objectif de ma thèse est d'explorer une nouvelle génération de "Lab-on-tip" basée sur l'interconnexion optique, de différents cœurs d'une fibre multicœurs, ou deux fibres à

Styles APA, Harvard, Vancouver, ISO, etc.

Delcamp, Adrien. "Protection de fibres base SiC pour composites à matrice céramique." Thesis, Bordeaux 1, 2008. http://www.theses.fr/2008BOR13729/document.

Texte intégral

Résumé :

Les composites à matrice céramique (CMC) sont des matériaux constitués d’une matrice céramique renforcée par des fibres céramiques continues (généralement à base de SiC ou de C). Le travail de thèse présenté, réalisé en collaboration avec Snecma Propulsion solide et l’Agence De l’Environnement et de la Maîtrise de l’Energie, a pour objectif d’introduire des matériaux CMC au sein de pièces de moteurs d’avions civils, concurrençant ainsi les alliages métalliques actuellement utilisés. Pour ce faire, les matériaux CMC devront répondre aux exigences propres à l’aéronautique civil, à savoir qu’ils

Styles APA, Harvard, Vancouver, ISO, etc.

Borjas, Ramos Mayra Fiorella, Pareja Joan Manuel Diaz, and Aguirre Angela Ester Huapaya. "Confección de trusas femeninas a base de fibras de bambú." Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2019. http://hdl.handle.net/10757/652392.

Texte intégral

Résumé :

El proyecto permite determinar la factibilidad y viabilidad de la idea de confección de trusas a base de fibras de bambú, con el fin de prevenir las infecciones vaginales y a la vez ofrecer variedad de diseños. Se demostró que existe problema de infecciones vaginales por medio de fuentes secundarias y primarias, aproximadamente 3 de cada 4 mujeres han tenido por lo menos 1 infección vaginal a lo largo de su vida. En las entrevistas realizadas, el 60% respondió que SÍ había tenido infecciones vaginales, mientras que el otro 40% había tenido pero muy pocas veces. Esta información permite a

Styles APA, Harvard, Vancouver, ISO, etc.

Bolvari, Anne Elizabeth. "The investigation of acid/base interactions in the adhesion of carbon fibers to thermoplastic matrices." Thesis, Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/80012.

Texte intégral

Résumé :

Lewis acid/base interactions were shown to play an important role in the optimization of the interfacial adhesion of reinforcing carbon fibers to thermoplastic polymer matrices. Inverse gas chromatography (IGC) and x-ray photoelectron spectroscopy (XPS) were used to characterize the acid/base nature of the carbon fiber surfaces. Capillary column IGC (CIGC) was used to determine the acid/base nature of thermoplastic polymer surfaces. To quantify the non-dispersive (acid/base) interactions, the dispersive component had to be factored out by separate experiments. The carbon fibers (both surface p

Styles APA, Harvard, Vancouver, ISO, etc.

Silva, Weslem Liberato. "Coincidência de aplicações em fibrados com base circulo e fibra garrafa de Klein." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/45/45131/tde-17022009-135551/.

Texte intégral

Résumé :

Sejam K, a garrafa de Klein, e K M S^ um fibrado com base S^ e fibra K. Neste trabalho estudamos o seguinte problema: dadas aplicações f, g : M M que preservam fibra sobre S^, quando o par (f, g) pode ser deformado, por uma homotopia que preserva fibra sobre S^, a um par de aplicações (f^{\'} , g^{\'} ) livre de coincidência? Let K be the Klein bottle and let K M S be a Klein bottle bundle over S 1 . In this work we study the following question: given a pair of fiber preserving maps over S^ , when can it be deformed by a fiberwise homotopy over S into a pair of coincidence free fib

Styles APA, Harvard, Vancouver, ISO, etc.

Paiva, Vanessa Giusti. "Desenvolvimento e caracterização de material composito a base de PMMA reforçado com fibra de vidro para uso odontologico." [s.n.], 2008. http://repositorio.unicamp.br/jspui/handle/REPOSIP/267189.

Texte intégral

Résumé :

Orientadores: Wagner dos Santos Oliveira, Leila Peres Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica Made available in DSpace on 2018-08-12T08:56:57Z (GMT). No. of bitstreams: 1 Paiva_VanessaGiusti_M.pdf: 3847622 bytes, checksum: 3b220ff7426435a8efb069e376425300 (MD5) Previous issue date: 2008 Resumo: O objetivo deste trabalho foi avaliar a resistência mecânica e a morfologia de fratura de resinas acrílicas sem e com reforço, processadas por microondas. Foram confeccionados 20 cp, sendo eles, Sem Reforço (SR), P246 5%, P246 8%, FSR 5%, FS

Styles APA, Harvard, Vancouver, ISO, etc.

Coronel-Rico, Juan Fernando. "Étude et réalisation d'un oscillateur à base de VCSEL verrouillé en phase pour des applications en télécommunications." Thesis, Toulouse, ISAE, 2016. http://www.theses.fr/2016ESAE0013/document.

Texte intégral

Résumé :

Les oscillateurs sont présents dans tous les systèmes de communications que nous utilisons. Ils nous permettent de faire la synchronisation entre l’émetteur et le récepteur d’un message. La qualité de cette synchronisation dépend de la stabilité de l’oscillateur. Afin de caractériser cette stabilité dans le domaine fréquentiel, le bruit de phase est utilisé comme paramètre de référence. Un oscillateur qui délivre un signal avec une faible valeur de bruit de phase est un oscillateur de grande pureté spectrale. Les oscillateurs électroniques ont une bonne performance à basse fréquence. En mesure

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Base fiber"

Tien, John K. Understanding the interdiffusion behavior and determining the long term stability of tungsten fiber reinforced niobium base matrix composite systems: Final report. National Aeronautics and Space Administration, Lewis Research Center, 1990.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nagano, Gorō. 織物の原風景: Juhi to sōhi no nuno to hata = Base to tip : bast-fiber weaving in Japan and its neighboring countries. Shikōsha, 1999.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Ramachandran, Siddharth. Fiber Based Dispersion Compensation. Springer New York, 2007. http://dx.doi.org/10.1007/978-0-387-48948-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Center, Lewis Research, ed. A comparison of the Bromination dynamics of pitch-based and vapor-grown graphite fibers. National Aeronautics and Space Administration, Lewis Research Center, 1986.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Zhukov, Aleksey, Ekaterina Bobrova, Igor' Bessonov, and Elizaveta Mednikova. Energy efficiency of building systems. INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1856852.

Texte intégral

Résumé :

The monograph summarizes and systematizes the results of experimental and theoretical studies of thermal insulation systems of building structures, technological facilities, transport facilities, and cold preservation. The criterion for the effectiveness of system insulation solutions is energy efficiency as a criterion for a comprehensive assessment, including both taking into account the direct reduction of energy costs during the operation of insulation shells, and the costs of installation, maintenance of structures in working condition, evaluation of the operational resistance of ma

Styles APA, Harvard, Vancouver, ISO, etc.

D, Zumwalde Ralph, American Industrial Hygiene Association, and American Industrial Hygiene Conference (2000 : Orlando, Fla.), eds. Synthetic fibers in the workplace: Where less fiber is healthier : based on AIHce 2000 Roundtable 223. AIHA Press, 2001.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Atmakuri, Ayyappa, Arvydas Palevicius, and Giedrius Janusas. Fiber-Based Hybrid Composites for Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-93144-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Saruhan, Bilge. Oxide-Based Fiber-Reinforced Ceramic-Matrix Composites. Springer US, 2003. http://dx.doi.org/10.1007/978-1-4615-0319-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

P, Bewley Douglas, Millis Marc G, and United States. National Aeronautics and Space Administration., eds. Fiber-optic applications for space-based engines. National Aeronautics and Space Administration, 1991.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Chapitres de livres sur le sujet "Base fiber"

Romani, Alessia, Raffaella Suriano, Andrea Mantelli, et al. "Composite Finishing for Reuse." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_9.

Texte intégral

Résumé :

AbstractCoating processes are emerging for new applications related to remanufactured products from End-of-Life materials. In this perspective, their employment can generate interesting scenarios for the design of products and solutions in circular economy frameworks, especially for composite materials. This chapter would give an overview of coating design and application for recycled glass fiber reinforced polymers on the base of the experimentation made within the FiberEUse project. New cosmetic and functional coatings were developed and tested on different polymer composite substrates fille

Styles APA, Harvard, Vancouver, ISO, etc.

Sun, Ke-Lin, Wei-Chao Zhou, and Qin-Zhang Wu. "Fiber Image Transmission System Base on FPGA." In Proceedings of the 2012 International Conference on Communication, Electronics and Automation Engineering. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-31698-2_174.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rath, Jan-Erik, Robert Graupner, and Thorsten Schüppstuhl. "Die-Less Forming of Fiber-Reinforced Plastic Composites." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_1.

Texte intégral

Résumé :

AbstractFiber-reinforced plastics (FRP) are increasingly popular in light weight applications such as aircraft manufacturing. However, most production processes of thin-walled FRP parts to date involve the use of expensive forming tools. This especially hinders cost-effective production of small series as well as individual parts and prototypes. In this paper, we develop new possible alternatives of highly automated and die-less production processes based on a short review of current approaches on flexible thin-walled FRP production. All proposed processes involve robot guided standard tools,

Styles APA, Harvard, Vancouver, ISO, etc.

Arias-Ceciliano, Kevin, Dagoberto Arias-Aguilar, Mónica Araya-Salas, Rooel Campos-Rodríguez, and Jesús Mora-Molina. "Circular Economy Applicable to Waste from the Sustainable Production of Musa textilis in Costa Rica." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-87065-1_33.

Texte intégral

Résumé :

Abstract The Musa textilis crop is known worldwide as Abaca or Manila hemp, and for many decades the pseudostem fibers have been used as export raw material for the manufacture of cellulose-based products. It is one of the most resistant natural fibers to salinity and has excellent mechanical properties, flexibility, and durability. In the Americas, the two leading countries in the production of Abaca fiber are Ecuador and Costa Rica. There is a good base of information on the agronomic aspects of the crop, the use of improved materials, fiber production techniques and quality characterization

Styles APA, Harvard, Vancouver, ISO, etc.

Bolvari, A. E., and Thomas Carl Ward. "Determination of Fiber—Matrix Adhesion and Acid—Base Interactions." In ACS Symposium Series. American Chemical Society, 1989. http://dx.doi.org/10.1021/bk-1989-0391.ch016.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Sokolovskaya, E. M., L. L. Meshkov, and N. Asrar. "Tantalum Barrier between Tungsten Fiber and Tantalum Alloyed Nickel — Base Matrix." In MICC 90. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3676-1_153.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Liu, Xianpeng, Zhao Hong, Yuan He, Jiangping Gao, and Haibo Hu. "Experimental Study on Unconfined Compressive Strength of Basalt Fiber Geogrid Base." In Sustainable Civil Infrastructures. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-87959-3_12.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Zhao, Guomin, Sheng Qu, Zhuqing Feng, et al. "Study on crack resistance of recycled asphalt base mixed with basalt fiber." In Advances in Geology and Resources Exploration. CRC Press, 2022. http://dx.doi.org/10.1201/9781003308584-48.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Prakash, Raghu V., and Monalisha Maharana. "Design and Development of Fiber-Reinforced Polymer Seat Base for Two-Wheelers." In Design for Tomorrow—Volume 3. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0084-5_57.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Ayed, Rabeb, Emiliano Borri, Gabriel Zsembinszki, Salwa Bouadila, Luisa F. Cabeza, and Mariem Lazaar. "Use of Textile Fiber Waste to Improve the Thermal and Mechanical Performance of Cement-Based Mortar." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-57800-7_25.

Texte intégral

Résumé :

AbstractImproving the thermal properties of materials used in buildings is crucial to reducing energy demand and consumption. This study investigated the use of textile fiber waste in cement-based composites for construction applications. Mechanical and thermal characterizations were carried out to assess the behavior of cement mortars with different percentages of two types of textile fibers after 7 and 28 days of water hardening. The results show that the incorporation of fibers can significantly improve the thermal insulation capacity of buildings by reducing the thermal conductivity of cem

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Base fiber"

Zhang, Zhixuan, Jian Zheng, and Menglong Zhang. "Numerical simulation of carbon fiber composite catapult base." In Second International Conference on Frontiers of Applied Optics and Computer Engineering (AOCE 2025), edited by Gefeson Mendes Pacheco, Dayan Liu, and Bikash Nakarmi. SPIE, 2025. https://doi.org/10.1117/12.3059912.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Tada, Akiko, Masaru Koshihara, and Takanori Saitoh. "High-accuracy OFDR-type dynamic distributed strain measurement using phase integration coherence compensation method and interferometer base point shift." In 29th International Conference on Optical Fiber Sensors, edited by Manuel Lopez-Amo Sainz, José Luís Santos, and Tong Sun. SPIE, 2025. https://doi.org/10.1117/12.3061922.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Guo, Yao, Qin Mei, Haobo Guo, Yihan Chen, and Yuemei Li. "Energy Supply Scheme for UAV Relay Base Station Based on Power over Fiber Technology." In 2024 8th International Conference on Smart Grid and Smart Cities (ICSGSC). IEEE, 2024. https://doi.org/10.1109/icsgsc62639.2024.10813961.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Libre, Jr., Roneh Glenn D., Jason Maximino C. Ongpeng, and Julius Leaño Jr. "Mechanical Performance of Treated (Bamboo) Fiber Textile Using Wide-width Tensile Test." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.2397.

Texte intégral

Résumé :

Textile fiber reinforcement made of natural fibers provides a more environment-friendly approach by lowering the overall carbon footprint of construction. Bamboo Fiber Textiles (BFT) extracted from scrap Bambusa blumeana (Bamboo) poles using 5 % Sodium Hydroxide solution and treated with 10% Aluminium Sulfate solution were used to twine cordages and plain textile grids. Bamboo cordages were subjected to direct tensile tests to determine the tenacity while plain grids with 20 mm spacing were subjected to tensile tests as described by ASTM D4595 or the Standard Test M

Styles APA, Harvard, Vancouver, ISO, etc.

Ikhsan Sugiarto, H., Rita Irmawaty, and Januarty Jaya Ekaputri. "Flexural Behavior of Hybrid Geopolymer Fly Ash Beams with Addition of PVA (Polyvinyl Alcohol) Fiber." In The 6th International Symposium on Infrastructure Development. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-g5u7of.

Texte intégral

Résumé :

Using cement as the primary material for making concrete, around 7%-15%, requires a significant amount of energy and generates abundant waste, thus significantly impacting the environmental conditions. Innovative materials are needed as alternatives to cement. Fly ash, as an environmentally friendly material, can be a solution to minimize the use of cement. The selected fiber is Poly-Vinyl Alcohol (PVA) fiber due to its high tensile strength, which can effectively inhibit the rate of crack development occurring in the beams. The research process was divided into two stages: geopolymer mortar c

Styles APA, Harvard, Vancouver, ISO, etc.

Abramov, Aleksei S., Dmitry A. Korobko, Pavel Mironov, and Andrei A. Fotiadi. "Broadband optical frequency comb generator on the base of fiber Bragg grating with controlled parameters." In Nonlinear Optics and Applications XIV, edited by Anatoly V. Zayats, Mario Bertolotti, and Alexei M. Zheltikov. SPIE, 2025. https://doi.org/10.1117/12.3058358.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Fujiyoshi, Kazuo, Takao Ueda, Hitoshi Takagi, and Masayuki Tsukagoshi. "Mechanical Properties and Durability of Bamboo Fibers/Bamboo-Fiber-Mixed Spray Mortar for Slope Protection." In 4th International Conference on Bio-Based Building Materials. Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.1.

Texte intégral

Résumé :

Conventionally, short fibers such as steel and synthetic fibers have been mixed into spray mortar used for slope protection to enhance resistance against cracking and durability. However, in the quest of higher performance fiber-reinforced mortar with reduced impact on the environment, natural fibers such as bamboo fibers may play a vital role. Thus, the tensile strength and the bond strength of bamboo fibers used for spray mortar were examined by laboratory tests. The mechanical properties of bamboo-fiber-reinforced spray mortar were examined under cyclic wet and dry conditions along with its

Styles APA, Harvard, Vancouver, ISO, etc.

Kadokura, Miyuki, Tokio Kasai, Kazuhiro Watanabe, and Michiko Nishiyama. "Practical Triaxial Accelerometer Using a Base-Embedded Semicircular Hetero-Core Fiber-Optic Sensor." In Optical Fiber Sensors. Optica Publishing Group, 2023. http://dx.doi.org/10.1364/ofs.2023.tu3.89.

Texte intégral

Résumé :

We propose a base-embedded practical triaxial hetero-core fiber-optic accelerometer and evaluate the frequency and amplitude characteristics. The proposed design shows less transverse sensitivity than a conventional triaxial hetero-core fiber optic accelerometer.

Styles APA, Harvard, Vancouver, ISO, etc.

Walden, R. H., W. E. Stanchina, R. A. Metzger, et al. "Broadband optoelectronic integrated receiver front-ends comprising InP-based heterojunction bipolar transistors and base-collector photodiodes." In Optical Fiber Communication Conference. OSA, 1994. http://dx.doi.org/10.1364/ofc.1994.tuh4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Baldini, Francesco, Susanna Bracci, and Mauro Bacci. "Fiber optic pH sensor using acid-base indicators covalently bound on controlled pore glasses." In OE Fiber 91, edited by Robert A. Lieberman. SPIE, 1992. http://dx.doi.org/10.1117/12.56534.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Base fiber"

Li, Victor C., and Yin-Wen Chan. Mechanical Interaction Between Synthetic Fiber and Cement Base Matrix in FRC Composites. Defense Technical Information Center, 1993. http://dx.doi.org/10.21236/ada265310.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Abhiraman, Agaram S. Precursor Structure - Fiber Property Relationships in Polyacrylonitrile- Based Carbon Fibers. Defense Technical Information Center, 1992. http://dx.doi.org/10.21236/ada249888.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Baldos, Uris Lantz. Development of GTAP 9 Land Use and Land Cover Data Base for years 2004, 2007 and 2011. GTAP Research Memoranda, 2017. http://dx.doi.org/10.21642/gtap.rm30.

Texte intégral

Résumé :

Understanding the challenges of achieving environmental sustainability goals given future demand for food, fiber and fuel requires economic models and databases that incorporate spatially explicit information on land use and land cover (LULC). The GTAP LULC database and its variants have been extensively used in a wide variety of applications aimed at examining the land-environment-energy nexus. Looking back the development of the first GTAP LULC was no simple task as it required the expertise of several researchers to identify and process relevant geospatial information. And because of this,

Styles APA, Harvard, Vancouver, ISO, etc.

Baldos, Uris Lantz, and Erwin Corong. Development of GTAP 10 Land Use and Land Cover Data Base for years 2004, 2007, 2011 and 2014. GTAP Research Memoranda, 2020. http://dx.doi.org/10.21642/gtap.rm36.

Texte intégral

Résumé :

Understanding the challenges of achieving environmental sustainability goals given future demand for food, fiber and fuel requires economic frameworks that incorporate spatially explicit information on land use and land cover (LULC). The GTAP LULC Data Base and its variants have been extensively used in a wide variety of applications aimed at examining the land-environment-energy nexus (Golub et al., 2012; Hertel et al., 2010; Johnson et al., 2019; Liu et al., 2014; Peña-Lévano et al., 2019; Stevenson et al., 2013; Taheripour et al., 2010; Taheripour & Tyner, 2012). The first release of th

Styles APA, Harvard, Vancouver, ISO, etc.

Peyghambarian, Nasser, Robert A. Norwood, and Andre Persoons. In-Fiber Magneto-Optic Devices Based on Ultrahigh Verdet Constant Organic Materials and Holey Fibers. Defense Technical Information Center, 2009. http://dx.doi.org/10.21236/ada495425.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Zaldivar, R. J., G. S. Relick, and J. M. Yang. Fiber Strength Utilization in Carbon/Carbon Composites: Part 2. Extended Studies With Pitch- and PAN-Based Fibers. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada341676.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Menking, Darrel E., Jonathan M. Heitz, Roy G. Thompson, and Deborah G. Thompson. Antibody-Based Fiber Optic Evanescent Wave Sensor. Defense Technical Information Center, 1995. http://dx.doi.org/10.21236/ada299937.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Tromberg, B. J. Development of antibody-based fiber optic sensors. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/6279061.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Wagner, Anna, Arthur Gelvin, Jon Maakestad, et al. Initial data collection from a fiber-optic-based dam seepage monitoring and detection system. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/47819.

Texte intégral

Résumé :

Visual inspection is the most used method to detect seepage at dams. Early detection can be difficult with this method, and use of appropriate real time monitoring could significantly increase the chances of recognizing possible failure. Seepages can be identified by analyzing changes in water and soil temperature. Optical fiber placed at the embankment’s downstream toe has been proven to be an efficient means of detecting real time changes at short intervals over several kilometers. This study aims to demonstrate how temperatures measured using fiber optic distributed sensing can be used to m

Styles APA, Harvard, Vancouver, ISO, etc.

Siebenaler. PR-015-143715-R01 Cable-Based Leak Detection Retrofit Study. Pipeline Research Council International, Inc. (PRCI), 2015. http://dx.doi.org/10.55274/r0010576.

Texte intégral

Résumé :

Various testing projects in the past few years have demonstrated the potential of cable-based leak detection technologies to accurately detect and locate relatively small leaks on onshore pipelines. Technologies such as distributed temperature sensing (DTS), distributed acoustic sensing (DAS), and vapor monitoring require the cables/tubes to be placed in relatively close proximity to the monitored pipeline, including some cases where the cable would be placed below the pipeline. One key market for such technology is the vast inventory of existing pipeline infrastructure. While there are many p

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!