Se connecter

Bibliographies thématiques / Coating dyeing / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Coating dyeing.

Articles de revues sur le sujet « Coating dyeing »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Coating dyeing ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Kale, Bandu Madhukar, Jakub Wiener, Jiri Militky, and Hafiz Shahzad Maqsood. "Effect of Cellulose Coating on Properties of Cotton Fabric." Materials Science Forum 860 (July 2016): 81–84. http://dx.doi.org/10.4028/www.scientific.net/msf.860.81.

Texte intégral

Résumé :

Cellulose solution was used for coating and it was prepared by dissolving pulp cellulose in Urea-Thiourea-NaOH-Water solvent system. Reactive Red 240 dye was used for dyeing the coated as well as control cotton fabric. The effect of cellulose coating on the dyeing properties of cotton fabric was studied by measuring K/S values of the coated substrate at various concentrations of cellulose and dye. K/S value decreased after coating cellulose on the surface of cotton fabric. The lightness of cotton fabric increased after cellulose coating. SEM micrographs revealed that coated cellulose was attac

Styles APA, Harvard, Vancouver, ISO, etc.

2

Yan, Xiaoxing, Xingyu Qian, Rong Lu, and Tetsuo Miyakoshi. "Comparison and Optimization of Reactive Dyes and Coating Performance on Fraxinus mandshurica Veneer." Polymers 10, no. 12 (2018): 1302. http://dx.doi.org/10.3390/polym10121302.

Texte intégral

Résumé :

In this study, Fraxinus mandshurica veneer was dyed with reactive brilliant red X-3B, black KN-B and blue K-3R dyes. The dye concentration, bath ratio and dyeing time were selected for an orthogonal experiment. Analysis of variance showed that the dye concentration had the greatest effect on the dye uptake of F. mandshurica veneer. In the independent experiments, dye uptake increased at first and then decreased with increasing dye concentration; the chromatic aberration increased with the dye concentration and then remained steady. The infrared spectra were used to examine the dyeing behaviors

Styles APA, Harvard, Vancouver, ISO, etc.

3

Souhoka, Venesya, Meigy Nelce Mailoa, and Adrianus O. W. Kaya. "MUTU MIKROBIOLOGI IKAN TUNA ASAP YANG DICOATING KITOSAN SELAMA PENYIMPANAN SUHU RUANG." INASUA: Jurnal Teknologi Hasil Perikanan 2, no. 1 (2022): 128–33. http://dx.doi.org/10.30598/jinasua.2022.2.1.128.

Texte intégral

Résumé :

Smoked fish that is left open will easily decay, so the shelf life is relatively short, therefore it is necessary to coat it using chitosan to extend the shelf life. Coating is a thin layer made to coat food ingredients and can be consumed. The purpose of this study was to determine the effect of chitosan coating as an edible coating which was applied to smoked tuna with a dyeing technique stored at room temperature. The application of chitosan as an edible coating on smoked tuna using a dyeing technique with a concentration of 2% can maintain a product with a shelf life untill 4 days at room

Styles APA, Harvard, Vancouver, ISO, etc.

4

Dugasz, J., and A. Szasz. "Metallic Coatings on Nonwovens for Special Purposes." Journal of Coated Fabrics 22, no. 1 (1992): 42–52. http://dx.doi.org/10.1177/152808379202200105.

Texte intégral

Résumé :

A special, highly adhesive metallic coating has been developed for nonwovens. The coating process has been developed for various substrata as: polyamid, polyester, glass-fiber cellulose and other natural fibers (or their mixtures), and their nonwoven counterparts. The coating itself is an autocatalytic, finishing process, requiring only dip-technologies (like a standard dyeing) on the finely adjusted textile.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Kartika, Dina, Siti Tjahjani, and Nita Kusumawati. "PEWARNAAN BATIK TULIS MENGGUNAKAN PEWARNA ALAMI DAN BAHAN FIKSASI KITOSAN PADA KELOMPOK BATIK TULIS ASIH MATAHARI KOTA BLITAR." Jurnal ABDI 4, no. 2 (2019): 55. http://dx.doi.org/10.26740/ja.v4n2.p55-58.

Texte intégral

Résumé :

Development on batik production processes inovation including dyeing process and pattern design become one of important factors that increase selling and production. Blitar city has unique batik product namely koi fish batik. The product is less popular among others batik from different city, so training on dyeing process with natural dye are essential to do. The objective of the training were to improve skill of dyeing process. The training for batik tulis group partner which Asih Matahari group included introduction of natural dye for batik dyeing and introduction of eco friendly fixation ag

Styles APA, Harvard, Vancouver, ISO, etc.

6

Jin, Lei, Daemyoung Yun, Wei Zhang, et al. "Polyphenols Coordinated with Cu (II) in an Aqueous System Build ion-Channel Coatings on Hair Surfaces." Materials 16, no. 4 (2023): 1333. http://dx.doi.org/10.3390/ma16041333.

Texte intégral

Résumé :

Recently, developments in the field of cosmetics have led to a renewed interest in hair dyeing. However, damage to the hair during the dyeing process has increased hesitation in attempting hair dyeing. As a result, hair dyes with minimal side effects have been in constant demand, and are being developed. In this study, natural-extract polyphenols, pyrogallol, and gallic acid are coordinated by CuCl2 in a NaCl aqueous solution to form an oligomer, which creates an ion-channel coating on the hair surface to protect it. This work attempts to develop fast, simple, and damage-free hair-dye ingredie

Styles APA, Harvard, Vancouver, ISO, etc.

7

Parpiyev, Khabibulla, Juramirza Kayumov, Guocheng Zhu, Adkhamjon Gafurov, and Muzaffarkhon Izatillaev. "Obtaining chromogenic structured yarns from a mixture of carbon and polyester fibers." E3S Web of Conferences 538 (2024): 04008. http://dx.doi.org/10.1051/e3sconf/202453804008.

Texte intégral

Résumé :

In this article, considering the problem of the difficulty of dyeing carbon fiber, it is proposed to use structural dyeing to achieve the dyeing of carbon fiber/polyester blended yarn. Using poly (styrene - methacrylic acid) colloidal microspheres as structural units, a photonic crystal color-forming structure was obtained using a carbon fiber/polyester blend yarn coating method. Polydimethylsiloxane (PDMS) encapsulation technology was used to analyze the effects of coating fluid mass fraction and self-assembly temperature on the structural color, to study the assembly process of colloidal mic

Styles APA, Harvard, Vancouver, ISO, etc.

8

Chen, Xuefei, Lubing Zha, Fangmeng Zeng, Jie Meng, Tiandi Pan, and Jindan Lv. "Tannic Acid/FeIII Complexes Coating PAN Nanofibrous Membrane for Highly Efficient Photocatalytic Degradation of Dyeing Wastewater." Coatings 13, no. 7 (2023): 1212. http://dx.doi.org/10.3390/coatings13071212.

Texte intégral

Résumé :

Considering photocatalytic degradation technology has recently attracted great attention for dyeing wastewater treatment, the polyacrylonitrile (PAN) nanofibrous membrane coated with the TA/FeIII complexes was proposed as a novel photocatalyst in this work. The successful self-assembly of TA/FeIII complexes on the PAN nanofibrous membrane after layer-by-layer deposition of TA and FeIII was confirmed by the analyses of chemical structure, morphology, and hydrophilicity. With the number of coating cycles, more TA/FeIII complexes coated on the PAN nanofibrous membrane, which contributed to the ex

Styles APA, Harvard, Vancouver, ISO, etc.

9

Kim, Tae Min, Hyun Jeong Won, Jun-Ho Yang, et al. "Multicolor Hair Dyeing with Biocompatible Dark Polyphenol Complex-Integrated Shampoo with Reactive Oxygen Species Scavenging Activity." Biomimetics 8, no. 6 (2023): 469. http://dx.doi.org/10.3390/biomimetics8060469.

Texte intégral

Résumé :

Hair dyeing has become a prevalent lifestyle trend, especially within the fashion industry. However, it possesses disadvantages, such as containing carcinogenic and toxic materials. In this study, we developed a biocompatible hair-dyeing technology using a shampoo with a dark polyphenol complex (DPC), referred to as S-DPC. The DPC was formed from a mixture of gallic acid and [1,1’-biphenyl]-2,2’,4,4’,5,5’-hexol and used to enhance both the stability of the hair coating and its ability to scavenge reactive oxygen species (ROS). Colloidal DPC particles play a pivotal role in the coating process

Styles APA, Harvard, Vancouver, ISO, etc.

10

Zeng, Qi, Chen Ding, Qingsong Li, et al. "Rapid fabrication of robust, washable, self-healing superhydrophobic fabrics with non-iridescent structural color by facile spray coating." RSC Advances 7, no. 14 (2017): 8443–52. http://dx.doi.org/10.1039/c6ra26526j.

Texte intégral

Résumé :

An amorphous photonic structure dyeing system has been fabricated which endows non-iridescent color fabrics with color-tunable, robust, washable, self-healing and superhydrophobic properties by spray coating technique and heat treatment.

Styles APA, Harvard, Vancouver, ISO, etc.

11

Gao, Zhong Feng, Xin Yu Wang, Jian Bang Gao, and Fan Xia. "Rapid preparation of polydopamine coating as a multifunctional hair dye." RSC Advances 9, no. 35 (2019): 20492–96. http://dx.doi.org/10.1039/c9ra03177d.

Texte intégral

Résumé :

A rapid and effective polydopamine-based method for dyeing human hair was demonstrated, which achieved a significant black color, remarkable durability, enhanced thermal insulation performance, and anti-bacterial property.

Styles APA, Harvard, Vancouver, ISO, etc.

12

U.M., Parpiyev, CH.Xushnazarova, I.O'razmetova, and O'.Toshtanov. "Creation of a coating composition based on protein hydrolysate for chrome leather coating and improvement of its technology." Multidisciplinary Journal of Science and Technology 5, no. 5 (2025): 380–82. https://doi.org/10.5281/zenodo.15383004.

Texte intégral

Résumé :

<em>The article presents the development of a wear complex for leather, prepared using acrylic primer compositions containing alkylcarbonyl ethanolates for chrome leather coating. The study investigates the ability of the AK-224 emulsion preparation to provide the main quality indicator of film-forming agents when used for chrome leather coating.</em>

Styles APA, Harvard, Vancouver, ISO, etc.

13

Pupeikė, Julija, Audronė Sankauskaitė, Sandra Varnaitė-Žuravliova, Vitalija Rubežienė, and Aušra Abraitienė. "Investigation of Electrical and Wearing Properties of Wool Fabric Coated with PEDOT:PSS." Polymers 15, no. 11 (2023): 2539. http://dx.doi.org/10.3390/polym15112539.

Texte intégral

Résumé :

The way to improve the properties (resistance to washing, delamination, and rubbing off) of the PEDOT:PSS coating applied on wool fabric without reduction of its electrical conductivity by introducing a commercially available combination of low formaldehyde content melamine resins into the printing paste is presented in this paper. Primarily, to improve the hydrophilicity and dyeability of wool fabric, the samples were modified using low-pressure nitrogen (N2) gas plasma. Two commercially available PEDOT:PSS dispersions were used to treat wool fabric by the exhaust dyeing and screen printing m

Styles APA, Harvard, Vancouver, ISO, etc.

14

Metanawin, Siripan, Marisa Pechyen, and Tanapak Metanawin. "Polypropylene Blends with Poly(Lactic Acid) Fiber: Preparation, Characterization, and Dyeability." Materials Science Forum 1140 (December 19, 2024): 93–100. https://doi.org/10.4028/p-rti50w.

Texte intégral

Résumé :

The dyeing ability of the polypropylene (PP) fiber was modified by blending with poly(lactic acid) (PLA). The PP, PLA, and PP/PLA fiber were obtained using the melt-spinning technique in the presence of the polypropylene-graft-maleic anhydride as a coupling. The dyeing ability, mechanical and thermal properties, and crystalline structure of the PP, PLA, and PP/PLA fibers were investigated. The effect of dyeing ability was measured using the CIE L* a* b*. The a* value of the PP of 11.91 increased to 43.48 for PP/PLA90, showing a light pink to red color. The SEM images demonstrated smooth fiber

Styles APA, Harvard, Vancouver, ISO, etc.

15

Sang, Ruijuan, Fei Yang, and Zhenxian Fan. "The Effect of Water-Based Primer Pretreatment on the Performance of Water-Based Inkjet Coatings on Wood Surfaces." Coatings 13, no. 9 (2023): 1649. http://dx.doi.org/10.3390/coatings13091649.

Texte intégral

Résumé :

Wood surface staining suffers from volatile organic gas (VOC) emissions and uneven staining at knots, and these environmental and decorative performance issues are the main restrictions in the application of wood products, indoors and outdoors. Herein, the method of wood-based panel surface staining is presented for improving environmental and decorative performance using environmentally friendly water-based inks, water-based primers, and digital inkjet coloring technology. The wood-based panels’ dye coatings were prepared with oak plank as the sample substrate, a one-component water-based pri

Styles APA, Harvard, Vancouver, ISO, etc.

16

Perelshtein, Ilana, Anat Lipovsky, Nina Perkas, Tzanko Tzanov, and Aharon Gedanken. "Sonochemical co-deposition of antibacterial nanoparticles and dyes on textiles." Beilstein Journal of Nanotechnology 7 (January 4, 2016): 1–8. http://dx.doi.org/10.3762/bjnano.7.1.

Texte intégral

Résumé :

The sonochemical technique has already been proven as one of the best coating methods for stable functionalization of substrates over a wide range of applications. Here, we report for the first time on the simultaneous sonochemical dyeing and coating of textiles with antibacterial metal oxide (MO) nanoparticles. In this one-step process the antibacterial nanoparticles are synthesized in situ and deposited together with dye nanoparticles on the fabric surface. It was shown that the antibacterial behavior of the metal oxides was not influenced by the presence of the dyes. Higher K/S values were

Styles APA, Harvard, Vancouver, ISO, etc.

17

Grethe, Thomas, Hajo Haase, Hariharasudan Natarajan, Nadia Limandoko, and Boris Mahltig. "Coating process for antimicrobial textile surfaces derived from a polyester dyeing process." Journal of Coatings Technology and Research 12, no. 6 (2015): 1133–41. http://dx.doi.org/10.1007/s11998-015-9709-9.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Liu, Yuansong, Yunxiao Gao, Zhiming Yu, and Yang Zhang. "The Action Difference of Lasiodiplodia theobromae on Infecting and Dyeing Poplar Wood in Spatial Growth." Coatings 11, no. 8 (2021): 985. http://dx.doi.org/10.3390/coatings11080985.

Texte intégral

Résumé :

Many factors affect the driving force of fungal growth and secretion. To compare the differences of Lasiodiplodia theobromae infected poplar wood, the changes of physical and chemical properties of vertically and horizontally infected poplar wood before and after dyeing were analyzed, and the infection characteristics were studied in this paper. The horizontal infection was more effective than the vertical infection in terms of infection depth, color depth, and microscopic hyphal invasion. The mycelium first intruded into the earlywood tissue and began to secrete a large amount of pigment afte

Styles APA, Harvard, Vancouver, ISO, etc.

19

Haji, Aminoddin. "Plasma activation and chitosan attachment on cotton and wool for improvement of dyeability and fastness properties." Pigment & Resin Technology 49, no. 6 (2020): 483–89. http://dx.doi.org/10.1108/prt-02-2020-0017.

Texte intégral

Résumé :

Purpose The dyeing of cellulosic and proteinous fibers with natural and synthetic colorants usually needs large amounts of metal salts to promote the dyeing procedure. To get rid of the necessity to use metal salts, plasma treatment and subsequent attachment of chitosan biopolymer were considered as green processes for surface functionalization of wool and cotton. The purpose of this paper is to investigate the effect of oxygen plasma treatment and attachment of chitosan on the dyeability of wool and cotton fabrics using walnut and weld as model natural dyes, as well as C.I. reactive blue 50 a

Styles APA, Harvard, Vancouver, ISO, etc.

20

Ning, Zixun, Sihui Wang, Yuqing Cui, et al. "Looking beneath the surface: Melanin-like nanoscaled polydopamine coating for “green” hair dyeing." Progress in Organic Coatings 201 (April 2025): 109112. https://doi.org/10.1016/j.porgcoat.2025.109112.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Zhao, Xin, and Yan Song Zhao. "Preparation and Application of a Leather Finish with Core-Shell Structure." Advanced Materials Research 791-793 (September 2013): 326–29. http://dx.doi.org/10.4028/www.scientific.net/amr.791-793.326.

Texte intégral

Résumé :

The core-shell acrylic resin emulsion is prepared by seed polymerization technology, with styrene, methyl methacrylate, acrylonitrile as monomer, butyl acrylate, methyl methacrylate, acrylic acid as shell monomer, and the of nanoTiO2 is introducted in shell emulsion. Infrared spectroscopy were used to characterize the structure of the prepared coating agent. The preparation of TiO2/acrylic resin emulsion for leather finishing agent, and discusses its influence on the leather properties. The results show that the synthetic finishing agents for dyeing after the fatliquoring leather finishing, go

Styles APA, Harvard, Vancouver, ISO, etc.

22

Saleemi, Sidra, Samander Ali Malik, Uzma Syed, and Anwaruddin Tanwari. "Investigation of Wash Durability of Silica Nanoparticle Coated 100% Cotton Reactive Dyed Fabric Treated by Sol-Gel Technique." Journal of Engineered Fibers and Fabrics 9, no. 4 (2014): 155892501400900. http://dx.doi.org/10.1177/155892501400900402.

Texte intégral

Résumé :

In this research a hydrophobic surface of 100% cotton woven fabric was developed by sol-gel technique. Fabric samples were dyed with Drimarene Reactive Red 5B and Drimarene Reactive Blue BR dyes (0.5% and 3% o.w.f) and then treated with a combination of silica nanoparticles, silane hydrophobes (alkyltrialkoxysilanes), and silane cross-linkers i.e, tetraethoxysilane (TEOS) and teramethoxysilane (TMOS) by dip-dry-cure process. After coating, wash durability of dyed samples was investigated for water repellency and water uptake according to AATCC standards. The effect of coating on dyeing behavio

Styles APA, Harvard, Vancouver, ISO, etc.

23

Hou, K. K., Y. W. Meng, D. Q. Liu, X. D. Zhu, and Y. B. Yun. "Preparation and performance study of environmentally friendly and durable kaolin/PDMS/cotton fabrics superhydrophobic surface." Digest Journal of Nanomaterials and Biostructures 19, no. 2 (2024): 751–60. http://dx.doi.org/10.15251/djnb.2024.192.751.

Texte intégral

Résumé :

In this research work, a fluorine-free, durable, and excellent self-cleaning and oil-water separation performance kaolin/polydimethylsiloxane/cotton fabrics (Kaolin/PDMS/cotton) superhydrophobic surface was successfully prepared. The morphology, wettability, and phase composition of the coating were characterized and tested using scanning electron microscopy (SEM), dynamic contact angle measuring instrument, and X-ray diffraction (XRD). The experimental results showed that the organic composite of hydrophobic modified kaolin particles and cotton fabrics was successfully achieved through the br

Styles APA, Harvard, Vancouver, ISO, etc.

24

Sousa, Ana Rita, Renata Matos, José R. M. Barbosa, et al. "Scalable Flexible Electromagnetic Interference Shielding Textiles Based on MWCNTs and PEDOT:PSS." Solid State Phenomena 333 (June 10, 2022): 161–69. http://dx.doi.org/10.4028/p-t2u2zu.

Texte intégral

Résumé :

With the rise of electromagnetic radiation-based technologies, considerable attention has been drawn to developing and implementing innovative electromagnetic shielding materials. Carbon nanomaterials and conductive polymers have been appealing to both academia and industry as promising alternatives for the traditionally used metallic materials, owing to their lightness, flexibility, easy processability and resistance to corrosion, which are of special importance for textile applications. In this work, multiwalled carbon nanotubes (MWCNTs) and poly (3,4-ethylenedioxythiophene):polystyrenesulfo

Styles APA, Harvard, Vancouver, ISO, etc.

25

Wang, Shuangshuang, Jie Zhang, Yan Zhang, Liwei Wang, Zhongxue Sun, and Hailing Wang. "Review on Source Profiles of Volatile Organic Compounds (VOCs) in Typical Industries in China." Atmosphere 14, no. 5 (2023): 878. http://dx.doi.org/10.3390/atmos14050878.

Texte intégral

Résumé :

The source profile of volatile organic compounds (VOCs) is essential for establishing reactivity- and toxicity-based emission inventories and developing effective air pollution control strategies. In this paper, the establishment of VOC source profiles and the VOC emission characteristics are reviewed in the petrochemical, solvent use, and chemical industries, and the most up-to-date profiles of the three industries in China are compiled via necessary adjustment and reconstruction of the test data from the literature. Alkanes dominated and OVOCs were often neglected in the overall petrochemica

Styles APA, Harvard, Vancouver, ISO, etc.

26

TOSHEV, Akmal Yusupovich, Mariya Ivanovna MARKEVICH, Tulkin Jumayevich KODIROV, and Valentina Illarionovna ZHURAVLEVA. "Laser Modification of Leather and Fur Surface to Improve Its Quality when Conducting Finishing Operations." Leather and Footwear Journal 20, no. 4 (2020): 353–60. http://dx.doi.org/10.24264/lfj.20.4.2.

Texte intégral

Résumé :

The article discusses the problems of activation of the surface of the leather tissue by laser exposure, changes in the morphology of the surface of the leather tissue during laser processing, and subsequent covering dyeing of the leather. It is shown that laser treatment changes the structure of the surface of the leather tissue, the bundles of collagen fibers are split, the structure becomes loose, which increases the diffusion of the coating dye reagents, and their reactivity increases without chemical modification. In the process of grinding leather fabric, it is finely cleaned which impro

Styles APA, Harvard, Vancouver, ISO, etc.

27

Goel, Anjali, M. K. Bhardwaj, and Neetu Rani. "Application of turmeric dye in the coating of Triphala guggle ayurvedic tablet." Journal of Applied and Natural Science 3, no. 2 (2011): 307–11. http://dx.doi.org/10.31018/jans.v3i2.204.

Texte intégral

Résumé :

The aim of present work was to extract a yellow colour dye from turmeric rhizome (Curcuma longa) and to use it in the coating of triphala guggle ayurvedic (abbreviated as TGA) tablets. For coating of the TGA tablets the work was completed into two parts- in the first part extraction of dye from turmeric rhizome was carried out and in the second part extracted dye was used to coat the TGA-tablets. The dye extract was used in two forms for dyeing the tablets - firstly as liquid turmeric dye extract (LTDE) and secondly as powdered turmeric dye extract (PTDE). The optimum extraction conditions wer

Styles APA, Harvard, Vancouver, ISO, etc.

28

Marangon, Andrea, Francesca Robotti, Elisa Calà, et al. "Green-Dyeing Processes of Plant and Animal Fibers Using Folium, an Ancient Natural Dye." Applied Sciences 14, no. 20 (2024): 9518. http://dx.doi.org/10.3390/app14209518.

Texte intégral

Résumé :

In recent decades, fabric-dyeing processes involved greener processes because, since ancient times, dyers used mordants based on metals to make the color better adhere to the textile fibers, but this is the reason for their increased pollution. To develop new strategies, attention was focused on finding the best condition for a dyeing method for natural fibers of vegetable and animal origin (cotton and wool) using an ancient natural dye known as folium. Folium was used mostly in miniature painting in an attempt to avoid the use of classical mordants and solvents. To this purpose, plasma treatm

Styles APA, Harvard, Vancouver, ISO, etc.

29

Tyowua, Andrew Terhemen, and Stephen Gbaoron Yiase. "Contact Angle Hysteresis – Advantages and Disadvantages: A Critical Review." Reviews of Adhesion and Adhesives 8, no. 1 (2020): 47–67. http://dx.doi.org/10.7569/raa.2020.097302.

Texte intégral

Résumé :

The existence of contact angle hysteresis – the difference between the values of the advancing and receding contact angles – is evident in nature (e.g. sticking of rain drops to car windscreens and window panes) and many industrial processes (e.g. surface coating, spraying, and dyeing of fabrics). This phenomenon is often viewed as a nuisance, but it is advantageous in many processes including dip and spin coating, spraying, and painting. With the early theoretical framework of Thomas Young, Robert Wenzel, and A. B. D. Cassie and S. Baxter, describing the wettability of solid surfaces and by e

Styles APA, Harvard, Vancouver, ISO, etc.

30

Chang, Ming-Chin, Chin-Pao Huang, Hung-Yee Shu, and Yung-Chen Chang. "A New Photocatalytic System Using Steel Mesh and Cold Cathode Fluorescent Light for the Decolorization of Azo Dye Orange G." International Journal of Photoenergy 2012 (2012): 1–9. http://dx.doi.org/10.1155/2012/303961.

Texte intégral

Résumé :

High color and organic composition, the effluents from the textile dyeing and finishing industry, can be treated by photocatalytic oxidation with UV/TiO2. The objective of this study was to prepare a new photocatalytic system by coating nanosized TiO2particles on steel mesh support and using cold cathode fluorescent light (CCFL) irradiation at 365 nm in a closed reactor for the oxidation of azo dye C.I. Orange G (OG). Various factors such as reaction time, coating temperature, TiO2dosage, pH, initial dye concentration, and service duration were studied. Results showed efficient color removal o

Styles APA, Harvard, Vancouver, ISO, etc.

31

Wisnujati, Andika, and Ferriawan Yudhanto. "KARAKTERISASI LAPISAN OKSIDA HASIL ANODIZING PADA ALUMINIUM DENGAN VARIABEL WAKTU PENCELUPAN." Jurnal Rekayasa Mesin 14, no. 2 (2023): 525–36. http://dx.doi.org/10.21776/jrm.v14i2.1309.

Texte intégral

Résumé :

Anodizing is an electrolytic coating process that converts aluminum into aluminum oxide. The anodizing process is widely used in the manufacturing industry, especially in automotive components. Its utilization has benefits such as resistance to scratches, ease of maintenance, and added decorative value. The purpose of this study was to determine the effect of time variations on the hardness and thickness of the oxide layer in the 6xxx series of aluminum anodizing processes. The variation of time used in the immersion process is 20, 30, and 40 minutes, with an electric current of 2 amps and a v

Styles APA, Harvard, Vancouver, ISO, etc.

32

Tangkawanit, Sudaporn, and Piriyaporn Keawsri. "SILK FABRICS COATED ZnO NANOPARTICLES AND DYEING WITH NATURAL INDIGO TO ENHANCE FUNCTIONAL TEXTILES." Suranaree Journal of Science and Technology 30, no. 1 (2023): 030090(1–11). http://dx.doi.org/10.55766/sujst-2023-01-e01905.

Texte intégral

Résumé :

Silk fabrics are modified by dyeing with natural indigo and ZnO nanoparticles coating to enhance functional textiles. Silk fabrics are coated with different weight of 1, 2, 3, and 4 g of ZnO nanoparticles. The properties of coated silk fabrics and color fastness of fabrics dyed were investigated. The FE-SEM and EDS results of the coated silk with ZnO nanoparticles were clearly confirmed the strongly adsorption bond of ZnO on the surface of silk adsorbent. Silk coated 3 g ZnO nanoparticles also provide optimal condition as the presence of Zn content on silk surface remain contain approximately

Styles APA, Harvard, Vancouver, ISO, etc.

33

Mousavi, S. A., Z. Arab Aboosadi, A. Mansourizadeh, and B. Honarvar. "Modification of porous polyetherimide hollow fiber membrane by dip-coating of Zonyl® BA for membrane distillation of dyeing wastewater." Water Science and Technology 83, no. 12 (2021): 3092–109. http://dx.doi.org/10.2166/wst.2021.201.

Texte intégral

Résumé :

Abstract Wetting and fouling have significantly affected the application of membrane distillation (MD). In this work, a dip-coating method was used for improving surface hydrophobicity of the polyetherimide (PEI) hollow fiber membrane. An air gap membrane distillation (AGMD) process was applied for treatment of the methylene blue (MB) solution. The porous PEI membrane was fabricated by a dry-wet spinning process and the hydrophobic 2-(Perfluoroalkyl) ethanol (Zonyl® BA) was used as the coating material. From FESEM, the modified PEI-Zonyl membrane showed an open structure with large finger-like

Styles APA, Harvard, Vancouver, ISO, etc.

34

Hidayat, Syarif, Adityo Noor Setyo Hadi Darmo, and Sigit Iswahyudi. "THE EFFECT OF TYPE OF DYE IN THE ANODIZING PROCESS OF ALUMINIUM T6 6061 ON COATING RESULTS." ELEMEN : JURNAL TEKNIK MESIN 12, no. 1 (2025): 53–59. https://doi.org/10.34128/je.v12i1.321.

Texte intégral

Résumé :

This study examines anodizing on aluminum 6061 using chemical dyes (printer ink and clothing dye) and a natural dye (turmeric) at concentrations of 5%, 10%, and 15% w/v. The anodizing process was conducted at 12 volts, 2.5 amps, for 30 minutes. The research aims to evaluate the effects of dye type and concentration on color brightness, oxide layer thickness, and wear rate. Results indicate that dye concentration influences brightness, with the best outcome at 10% w/v printer ink (brightness level 5.4). Oxide layer thickness was unaffected by the type or concentration of dye used. Wear testing

Styles APA, Harvard, Vancouver, ISO, etc.

35

Fang, Xinrui, Zhong Zhang, Qing Wang, et al. "Multi-functional super-liquid-repellent fabric coating with chemical/physical robustness by one-step disperse dyeing process." Progress in Organic Coatings 196 (November 2024): 108703. http://dx.doi.org/10.1016/j.porgcoat.2024.108703.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

36

Mu, Tong, Nengyu Pan, Yingfeng Wang, Xuehong Ren, and Tung-Shi Huang. "Antibacterial Coating of Cellulose by Iso-bifunctional Reactive N-halamine with the Dyeing Process of Reactive Dye." Fibers and Polymers 19, no. 11 (2018): 2284–89. http://dx.doi.org/10.1007/s12221-018-8632-y.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

37

Costa, Eduardo M., Sara Silva, Manuela Machado, Sérgio C. Sousa, Freni K. Tavaria, and Manuela Pintado. "Chitosan Nanoparticles as Bioactive Vehicles for Textile Dyeing: A Proof of Concept." Polymers 14, no. 22 (2022): 4821. http://dx.doi.org/10.3390/polym14224821.

Texte intégral

Résumé :

In recent years bioactive textiles have risen to the forefront of consumers perception due to their potential protection against virus, fungi and bacteria. However, traditional textile staining is an eco-damaging process that and current methods of textile functionalization are expensive, complicated and with great environmental impact. With that in mind, this work sought to show a possible solution for this problematic through the usage of a novel one step textile dyeing and functionalization method based upon nanoencapsulated textile dyes (NTDs). To do so navy blue everzol NTDs were produced

Styles APA, Harvard, Vancouver, ISO, etc.

38

PAN, YuanYuan, XuNan YANG, MeiYing XU, et al. "Mechanism of dyeing technique of Xiang-yun-sha and bioaugmentation of its coating mud with iron reducing bacteria." SCIENTIA SINICA Technologica 48, no. 9 (2018): 1012–20. http://dx.doi.org/10.1360/n092018-00136.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

39

Venugopal, Sivaranjani, and Yasmin Khambhaty. "Agro-residues for enhanced production of bio-colorants: a feasible approach for dyeing and surface coating of leather." Clean Technologies and Environmental Policy 22, no. 8 (2020): 1687–700. http://dx.doi.org/10.1007/s10098-020-01900-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Yu, Jia-Li, Wen-Yi Wang, Jia-Chi Chiou, Ka-Fu Yung, and Chi-Wai Kan. "Simultaneous dyeing and wastewater treatment in one bath by constructing cationic polyelectrolyte self-assembled coating onto cellulosic fabrics." Sustainable Chemistry and Pharmacy 45 (June 2025): 102028. https://doi.org/10.1016/j.scp.2025.102028.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

41

Liu, Fengwei, Lei Tong, Qingyue Luo, et al. "Emission Characteristics and Health Risk Assessment of Volatile Organic Compounds in Key Industries: A Case Study in the Central Plains of China." Atmosphere 16, no. 1 (2025): 74. https://doi.org/10.3390/atmos16010074.

Texte intégral

Résumé :

Volatile organic compounds (VOCs), the precursors of ozone and fine particulate matter, are one of the atmospheric pollutants harmful to human health. The emission characteristics of VOCs in Anyang, a typical industrial city in the Central Plains of China, are unclear. To determine the emission level and composition of local VOCs, this study conducted on-site sampling of 20 factories in eight key industries. A total of 105 VOC species in seven categories were observed. The concentration of total VOCs emitted from the eight industries in order from large to small was as follows: packaging and p

Styles APA, Harvard, Vancouver, ISO, etc.

42

Sun, Wen, Xuankun Li, Jingtao Zou, and Han Guo. "N-TiO2-Coated SiC Foam for the Treatment of Dyeing Wastewater under Blue Light LED Irradiation." Coatings 12, no. 5 (2022): 585. http://dx.doi.org/10.3390/coatings12050585.

Texte intégral

Résumé :

TiO2 is widely used for the photocatalytic degradation of organic pollutants in wastewater, but the practical applications of the photocatalyst are limited due to its poor visible light absorption and low recovery rate. In this study, high production of nitrogen-doped TiO2 was achieved by a hydrolysis precipitation method; the obtained N-TiO2 had a small crystallite size and good dispersibility. The effect of calcining temperature on the photocatalytic performance of N-TiO2 was evaluated through the degradation of methylene blue (MB) in a blue light LED irradiation cylinder, it was found the N

Styles APA, Harvard, Vancouver, ISO, etc.

43

Sun, Wen, Xuankun Li, Jingtao Zou, and Han Guo. "N-TiO2-Coated SiC Foam for the Treatment of Dyeing Wastewater under Blue Light LED Irradiation." Coatings 12, no. 5 (2022): 585. http://dx.doi.org/10.3390/coatings12050585.

Texte intégral

Résumé :

TiO2 is widely used for the photocatalytic degradation of organic pollutants in wastewater, but the practical applications of the photocatalyst are limited due to its poor visible light absorption and low recovery rate. In this study, high production of nitrogen-doped TiO2 was achieved by a hydrolysis precipitation method; the obtained N-TiO2 had a small crystallite size and good dispersibility. The effect of calcining temperature on the photocatalytic performance of N-TiO2 was evaluated through the degradation of methylene blue (MB) in a blue light LED irradiation cylinder, it was found the N

Styles APA, Harvard, Vancouver, ISO, etc.

44

Vespignani, Laura, Marco Bonanni, Marco Marradi, Benedetto Pizzo, Roberto Bianchini, and Giacomo Goli. "Naturalized Dyes: A New Opportunity for the Wood Coloring." Polymers 15, no. 17 (2023): 3632. http://dx.doi.org/10.3390/polym15173632.

Texte intégral

Résumé :

Naturalized dyes (NDs) are innovative and eco-friendly synthetic compounds in which a chromophore is covalently linked to a natural sugar (e.g., lactose). The sugar moiety confers water-solubility and biocompatibility to the dye molecule as a whole. NDs have demonstrated potential application in dyeing textiles and leather. The purpose of this work was to demonstrate that selected NDs can be also applied to dye wood. To that aim, two NDs were tested to color beech and poplar wood. The NDs were applied as a simple aqueous solution or mixed with a waterborne, biogenic staining agent (commerciall

Styles APA, Harvard, Vancouver, ISO, etc.

45

Wahyuni, Sri, Ranti Selvina, Puspa Julistia Puspita, Haryo Tejo Prakoso, Priyono Priyono, and Siswanto Siswanto. "EXTRACTION, CHARACTERIZATION AND APPLICATION OF CHITOSAN DERIVED FROM MAGGOT (BLACK SOLDIER FLY) WASTE AS EDIBLE COATING FOR RED GRAPES (Vitis vinifera)." Jurnal Penelitian Pascapanen Pertanian 18, no. 1 (2021): 45. http://dx.doi.org/10.21082/jpasca.v18n1.2021.45-56.

Texte intégral

Résumé :

<p class="Abstrak"><span class="tlid-translation"><span lang="EN-GB">Black Soldier Fly (BSF) farming showed an increasing trend in the past 5 years. The production process generates a leftover, that is the exuviae which are still untapped. BSF exuviae contain chitin and chitosan which can be utilized in various fields, one of which is fruit preservatives. Grapes (<em>Vitis vinifera</em>) is known to have many benefits and has a content of vitamins A, B, C, and E but it has a short shelf life. The purpose of this study was to characterize chitosan from BSF exuviae

Styles APA, Harvard, Vancouver, ISO, etc.

46

Kozakiewicz, Marcin, Piotr Szymor, and Raphael Olszewski. "Cytotoxicity of three-dimensional paper-based models from a three-dimensional paper-based printer." NEMESIS 3, no. 1 (2018): 15. http://dx.doi.org/10.14428/nemesis.v3i1.3883.

Texte intégral

Résumé :

Objective: Our study aimed to determine the possibility of using models created with a low-cost, paper based 3D printer in an operating room. Therefore influence of different methods of sterilization on models was tested and cytotoxicity of generated models was determined. Material and methods: 30 cuboids divided into three groups were used for verification of shape stability after sterilization. Each group was sterilized either with: Ethylene oxide in temperature 55˚C, Hydrogen peroxide gas plasma in temperature 60˚C or Gamma irradiation at 21˚C, 25kGy. Each cuboid was measured using calliper

Styles APA, Harvard, Vancouver, ISO, etc.

47

Petrova, Luidmila, Rodion Grishin, Anvar Zimnurov, Olga Kozlova, Olga Odintsova, and Elena Sangeeva. "Improvement of Textile Materials Processing Techniques by Applying Aqueous Dispersions of Polymers." Coatings 13, no. 2 (2023): 462. http://dx.doi.org/10.3390/coatings13020462.

Texte intégral

Résumé :

This paper presents the results of studies in the field of polymer materials application for fabric modification. The aim of the study is to identify the most effective technique of deposition of Russian-made formulations of an acryl and urethane nature with pigment compositions in the processes of functional fabric production. The authors analyze the efficiency of three processing solutions: the technology of uniform dyeing with pigments consisting of coating the fabric surface with a pigment–polymer composition, the technology of obtaining “camouflage” fabrics based on a conceptually new app

Styles APA, Harvard, Vancouver, ISO, etc.

48

Hassabo, A. G., A. Mendrek, C. Popescu, H. Keul, and M. Möller. "Deposition of Functionalized Polyethylenimine-Dye onto Cotton and Wool Fibres." Research Journal of Textile and Apparel 18, no. 1 (2014): 36–49. http://dx.doi.org/10.1108/rjta-18-01-2014-b006.

Texte intégral

Résumé :

Functionalized polyethylenimine–dye (FPEI) is prepared by mixing branched polyethyleneimine (PEI), in which its primary amine groups are modified at different ratios with a quaternary ammonium coupler (QI), and reactive dyestuff (RD) (QI/RD = 0/100, 20/80, 40/60, 60/40 and 80/20 mole/mole %). The deposition of FPEI from an aqueous solution onto the surface of cotton and wool fibres is studied. The adsorption of a charged polymer from an aqueous medium by cotton and wool fibres is investigated at different pH values, and the uptake of colour on fibres is measured by Datacolor and UVVIS spectrop

Styles APA, Harvard, Vancouver, ISO, etc.

49

Luo, Zhe, and Yang Zhang. "Construction of a Chitosan/ZnO-Based Light-Resistant Coating System to Protect Dyed Wood from Ultraviolet Irradiation via Layer-by-Layer Self-Assembly." International Journal of Molecular Sciences 23, no. 24 (2022): 15735. http://dx.doi.org/10.3390/ijms232415735.

Texte intégral

Résumé :

Wood dyeing is an effective way to alleviate the supply-demand imbalance of valuable wood and improve the surface decoration of fast-growing wood. However, applications of dyed wood are limited due to the susceptibility of dyes and wood to photo-discolor and degrade under light irradiation. Thus, the improved weather resistance of dyed wood is crucial. To prevent photochromic discoloration of dyed wood, an anti-photochromic coating structure was constructed via layer-by-layer self-assembly (LbL) using chitosan and zinc oxide (ZnO). The results showed that the surface color difference of treate

Styles APA, Harvard, Vancouver, ISO, etc.

50

Ali, Sayeda Sadek, Yasser Kamal Abdel-moneam, and Mohammad Hegazy. "Preparation and application of titanium dioxide nanoparticles in offset ink." Journal of Physics: Conference Series 2305, no. 1 (2022): 012016. http://dx.doi.org/10.1088/1742-6596/2305/1/012016.

Texte intégral

Résumé :

Abstract TiO2 nano pigments in pure crystallographic forms (anatase) were prepared via a hydrothermal approach. The produced pigments were investigated physiochemically by several techniques, then they were utilized in paper-coating mixtures and their effect on the properties of coated papers was investigated. XRD revealed that these pigments produced a pure anatase phase pigment. TEM showed that the crystallite size for anatase is 50 nm. Whether optical or physical properties for the treatment before and after application were tracked. Although TiO2 is applied as a white dye, it provided good

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!