Se connecter

Bibliographies thématiques / Computer-aided engineering

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Computer-aided engineering »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 30 juillet 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Computer-aided engineering ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Computer-aided engineering"

1

Kolbasin, Alexander, et Oksana Husu. « Computer-aided design and Computer-aided engineering ». MATEC Web of Conferences 170 (2018) : 01115. http://dx.doi.org/10.1051/matecconf/201817001115.

Texte intégral

Résumé :

In modern industrial production some of the major factors of successful development include: cost reduction of the production, im-provement of its quality, as well as help to minimise the time in market en-try. Computer-aided design and Computer-aided engineering (CAD / CAE - systems) are the most effective for implementation of these requirements. Possible use of this engineering modeling simulation in conjunction with the power and speed of high performance computing could reduce costs and time of each cycle of designing, and also significantly reduce devel-opment time. The introduction of new technologies, the use of high quality products and engagement of qualified personnel would allow businesses and organizations to get on a path of innovative development of design and production systems.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Dorey, A. P. « Computer Aided Engineering ». Electronics and Power 31, n^o 7 (1985) : 528. http://dx.doi.org/10.1049/ep.1985.0320.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Hall, P. A. V., et G. H. Galal. « Computer-aided software engineering ». Computer-Aided Engineering Journal 6, n^o 4 (1989) : 113. http://dx.doi.org/10.1049/cae.1989.0028.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Bonney, M. C. « Computer aided production engineering ». Artificial Intelligence in Engineering 3, n^o 1 (janvier 1988) : 52. http://dx.doi.org/10.1016/0954-1810(88)90046-5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Ghosh, S. K. « Computer-aided production engineering ». Journal of Mechanical Working Technology 16, n^o 2 (avril 1988) : 223–24. http://dx.doi.org/10.1016/0378-3804(88)90170-2.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Heym, M., et H. Österle. « Computer-aided methodology engineering ». Information and Software Technology 35, n^o 6-7 (juin 1993) : 345–54. http://dx.doi.org/10.1016/0950-5849(93)90005-n.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Radcliffe, David F. « Computer-Aided Rehabilitation Engineering—CARE ». Journal of Medical Engineering & ; Technology 10, n^o 1 (janvier 1986) : 1–6. http://dx.doi.org/10.3109/03091908609044328.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Cronin, Denis. « Conference report. Computer-aided engineering ». Computer-Aided Engineering Journal 2, n^o 1 (1985) : 32. http://dx.doi.org/10.1049/cae.1985.0007.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Winter, Peter. « Tutorial. Computer-aided process engineering ». Computer-Aided Engineering Journal 6, n^o 1 (1989) : 6. http://dx.doi.org/10.1049/cae.1989.0003.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Richards, Larry G. « Computer–aided Engineering : an Overview ». Journal of Engineering Design 2, n^o 3 (janvier 1991) : 171–74. http://dx.doi.org/10.1080/09544829108901679.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Computer-aided engineering"

1

Akbary-Safa, Mahnaz. « Computer aided inspection in engineering manufacture ». Thesis, Imperial College London, 1992. http://hdl.handle.net/10044/1/8346.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Sivaloganathan, Sangarappillai. « Sketching input for computer aided engineering ». Thesis, City University London, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292733.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Shahdad, Mir Abubakr. « Engineering innovation (TRIZ based computer aided innovation) ». Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3317.

Texte intégral

Résumé :

This thesis describes the approach and results of the research to create a TRIZ based computer aided innovation tools (AEGIS and Design for Wow). This research has mainly been based around two tools created under this research: called AEGIS (Accelerated Evolutionary Graphics Interface System), and Design for Wow. Both of these tools are discussed in this thesis in detail, along with the test data, design methodology, test cases, and research. Design for Wow (http://www.designforwow.com) is an attempt to summarize the successful inventions/ designs from all over the world on a web portal which has multiple capabilities. These designs/innovations are then linked to the TRIZ Principles in order to determine whether innovative aspects of these successful innovations are fully covered by the forty TRIZ principles. In Design for Wow, a framework is created which is implemented through a review tool. The Design for Wow website includes this tool which has been used by researcher and the users of the site and reviewers to analyse the uploaded data in terms of strength of TRIZ Principles linked to them. AEGIS (Accelerated Evolutionary Graphics Interface System) is a software tool developed under this research aimed to help the graphic designers to make innovative graphic designs. Again it uses the forty TRIZ Principles as a set of guiding rules in the software. AEGIS creates graphic design prototypes according to the user input and uses TRIZ Principles framework as a guide to generate innovative graphic design samples. The AEGIS tool created is based on TRIZ Principles discussed in Chapter 3 (a subset of them). In AEGIS, the TRIZ Principles are used to create innovative graphic design effects. The literature review on innovative graphic design (in chapter 3) has been analysed for links with TRIZ Principles and then the DNA of AEGIS has been built on the basis of this study. Results from various surveys/ questionnaires indicated were used to collect the innovative graphic design samples and then TRIZ was mapped to it (see section 3.2). The TRIZ effects were mapped to the basic graphic design elements and the anatomy of the graphic design letters was studied to analyse the TRIZ effects in the collected samples. This study was used to build the TRIZ based AEGIS tool. Hence, AEGIS tool applies the innovative effects using TRIZ to basic graphic design elements (as described in section 3.3). the working of AEGIS is designed based on Genetic Algorithms coded specifically to implement TRIZ Principles specialized for Graphic Design, chapter 4 discusses the process followed to apply TRIZ Principles to graphic design and coding them using Genetic Algorithms, hence resulting in AEGIS tool. Similarly, in Design for Wow, the content uploaded has been analysed for its link with TRIZ Principles (see section 3.1 for TRIZ Principles). The tool created in Design for Wow is based on the framework of analysing the TRIZ links in the uploaded content. The ‘Wow’ concept discussed in the section 5.1 and 5.2 is the basis of the concept of Design for Wow website, whereby the users upload the content they classify as ‘Wow’. This content then is further analysed for the ‘Wow factor’ and then mapped to TRIZ Principles as TRIZ tagging methodology is framed (section 5.5). From the results of the research, it appears that the TRIZ Principles are a comprehensive set of innovation basic building blocks. Some surveys suggest that amongst other tools, TRIZ Principles were the first choice and used most .They have thus the potential of being used in other innovation domains, to help in their analysis, understanding and potential development.

Styles APA, Harvard, Vancouver, ISO, etc.

4

CAMPANELLA, Davide. « COMPUTER AIDED ENGINEERING OF SOLID BONDING PHENOMENA ». Doctoral thesis, Università degli Studi di Palermo, 2014. http://hdl.handle.net/10447/95507.

Texte intégral

Résumé :

Joining is a fundamental technological process in manufacturing used to create a single piece from two or more parts. Welding is still today one of the most popular joining techniques used in manufacturing allowing a permanent junction. Traditional welding processes are based on the melting of the materials to be joined. In this way, several defects may arise because of solidification problems, joints deformation due to elevated residual stress and metallurgical integrity of the joints (intermetallic, porosities, etc). As an example, some aluminum alloys present considerable problems the junction is carried out by traditional fusion welding methods. During the melting process, in fact, the liquid material can react with the surrounding atmosphere oxidizing and creating a weak joint. On the other hand, Solid Bonding based welding processes allow for defect free joints with low residual stress and low distortion. However, these processes are usually characterized by complex mechanics due to peculiar material flow. Hence, the engineering and optimization of solid bonding processes is difficult and requires a large number of time and cost consuming test trials. In this way, proper numerical models are essential tools permitting effective process design. The aim of this research was the computer aided engineering of two different manufacturing processes taking advantage of the same metallurgical phenomenon, namely solid boding. Linear Friction Welding (LFW), used to weld non-axisymmetric components and Accumulative Roll Bonding (ARB), used to increase the mechanical properties of sheet metals, were selected. Experiments, both of LFW and ARB, were run with the aim to study the effects of the process input parameters on the final product quality, to define proper process windows and to acquire the data needed for the numerical models set up and validation. In particular, as far as LFW is regarded, a dedicated experimental machine, able to produce LFWed joints with varying pressure, oscillation frequency and amplitude, was designed and built. Numerical models were set up, validated and used to design the process by studying the complex material behavior during the solid bonding of different aluminum alloys. In particular, as far as ARB is regarded, two different numerical models were considered, using an explicit and implicit approach, respectively, in order to study the process. An implicit approach was used for the LFW process, leading to the understanding of the main process variables influence on the field variables distribution and the occurrence of actual bonding. The simulation tools used in this work were DEFORM3D and ABAQUS CAE/6.9 (2D and 3D modes). The first prototype of the LFW machine was designed and developed during the first doctorate year. During the second doctorate year, the Accumulative Roll Bonding process was studied at the University of Erlangen-Nuremberg while, during the third year, the Linear Friction Welding process was analyzed at the University of Palermo.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Song, Guangming. « An application of computer aided design and computer aided draughting techniques to gearing ». Thesis, City, University of London, 1988. http://openaccess.city.ac.uk/19505/.

Texte intégral

Résumé :

The thesis describes the development of a computer-aided design and computer-aided draughting package of industrial gearboxes for transmitting power between shafts having parallel major axes. The package mainly consists of the following functions: (a) Determination of gear tooth numbers from the properties of continued and conjugate fractions (b) Generation of gear teeth by a rack-type cutter (c) Calculation of gear tooth profile and production of gear tooth grid for finite element stress analysis (d) Detailed strength analysis and design of a spur or helical, external or internal, standard or modified, single- or double- reduction gear set based on the ISO gear standards (e) Shaft design and analysis (f) Bearing selection and analysis (g) Production of the working drawings of the main gearbox components. This package works on the IBM PC and its compatible machines, operates in an interactive mode, combines the experience of the designer with the power of the computer, and produces substantial savings in time and cost over conventional design methods. Design examples illustrating this package are given. In addition, the maximum tooth root bending stresses have been studied by using finite element techniques and the results have been compared with those using the ISO gear standards.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Le, Gal Thierry. « Re-engineering software for integration using computer aided software engineering ». Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-06232009-063016/.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Panton, Stephen M. « Computer aided form roll design ». Thesis, Aston University, 1987. http://publications.aston.ac.uk/11928/.

Texte intégral

Résumé :

Cold roll forming is an extremely important but little studied sheet metal forming process. In this thesis, the process of cold roll forming is introduced and it is seen that form roll design is central to the cold roll forming process. The conventional design and manufacture of form rolls is discussed and it is observed that surrounding the design process are a number of activities which although peripheral are time consuming and a possible source of error. A CAD/CAM system is described which alleviates many of the problems traditional to form roll design. New techniques for the calculation of strip length and controlling the means of forming bends are detailed. The CAD/CAM system's advantages and limitations are discussed and, whilst the system has numerous significant advantages, its principal limitation can be said to be the need to manufacture form rolls and test them on a mill before a design can be stated satisfactory. A survey of the previous theoretical and experimental analysis of cold roll forming is presented and is found to be limited. By considering the previous work, a method of numerical analysis of the cold roll forming process is proposed based on a minimum energy approach. Parallel to the numerical analysis, a comprehensive range of software has been developed to enhance the designer's visualisation of the effects of his form roll design. A complementary approach to the analysis of form roll design is the generation of form roll design, a method for the partial generation of designs is described. It is suggested that the two approaches should continue in parallel and that the limitation of each approach is knowledge of the cold roll forming process. Hence, an initial experimental investigation of the rolling of channel sections is described. Finally, areas of potential future work are discussed.

Styles APA, Harvard, Vancouver, ISO, etc.

8

Cevheri, Necmettin. « Computer Aided Engineering Of An Unmanned Underwater Vehicle ». Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/2/12610754/index.pdf.

Texte intégral

Résumé :

Hydrodynamic and thermal analyses performed during the conceptual design of an unmanned underwater vehicle are presented in this study. The hull shape is determined by considering alternative shapes and the dimensions are determined from the internal arrangement of components. Preliminary thermal analyses of the watertight section are performed with a commercial software called FLUENT to check the risk of over-heating due to the heat dissipation of devices. Performance of the proposed hull design is analyzed by FLUENT. Before simulations of the vehicle, validation studies are performed. Models 4159, 4158 and 4154 of Series 58 are chosen as the experimental reference. Their total resistance coefficients are compared with the results of the validations analyses. Mesh densities, turbulence models, near wall modeling approaches and inlet turbulence intensities are varied to understand their effects on the accuracy of predictions. A suitable turbulence modeling approach is chosen to analyze forward and vertical motions of the vehicle to check whether speed requirements are fulfilled. Hull configurations with and without appendages are used to observe their effects on total drag. It is observed that the proposed design satisfies speed requirements of the vehicle and no overheating is expected in the watertight section.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Zullo, Luca Costantino. « Computer aided design of experiments : an engineering approach ». Thesis, Imperial College London, 1991. http://hdl.handle.net/10044/1/8323.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Oltikar, Akhil Manohar. « Computer-Aided Engineering of Plywood Upholstered Furniture Frames ». NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20001221-130641.

Texte intégral

Résumé :

Until the early 1900s, furniture was built by hand, one piece at a time. The industrial revolution and modern manufacturing technology has changed all of that. Today, as the furniture industry moves firmly into the next century, computerized systems and automated manufacturing have become more common to the industry. This thesis represents an effort to analyze the current practices in computer-aided design of upholstered furniture, specifically plywood frame furniture, and to develop new procedures for reducing the lead-time in upholstery product development. Different 3-D modeling techniques for designing plywood furniture frames and their features have been developed and implemented. A plywood frame feature library has been created, and geometric relations needed to fully constrain each feature type have been developed. This reduces modeling time and also increases consistency in the solid models. A new reverse engineering procedure, using an articulating arm, has been proposed, implemented, and tested for 3-D digitization of plywood frames. The proposed methodology eliminates some of the traditional processes currently followed in the industry, thus making the product development faster and more streamlined. Further, an algorithm has been developed, implemented and tested for automatically mirroring plywood upholstery frame assemblies in a CAD system. The algorithm considerably reduces the modeling lead-time in the product development process. Finally, some future work that considers currently available 3-D CAD technologies has been recommended which would help close the gap between upholstery designers and manufacturers.

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Computer-aided engineering"

1

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Peter, Riley, et City and Guilds of London Institute., dir. Computer-aided engineering. Basingstoke : Macmillan [for the] City and Guilds [of London Institute], 1994.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Birmingham), Autotech 89 (1989. Computer aided engineering. [London] : Institution of Mechanical Engineers, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Open University. Computer-aided Engineering Course Team., dir. Computer-aided engineering. Milton Keynes : Open University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Muller, Hausi. Computer Aided Software Engineering. Boston, MA : Springer US, 1996.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Chapitres de livres sur le sujet "Computer-aided engineering"

1

Hinduja, Srichand, et Lin Li. « Computer Aided Engineering ». Dans Proceedings of the 37th International MATADOR Conference, 35–64. London : Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-4480-9_2.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Miller, Ralph E., et R. Peter Dube. « Computer Aided Engineering ». Dans Application Development Systems, 283–306. Tokyo : Springer Japan, 1986. http://dx.doi.org/10.1007/978-4-431-68051-2_15.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Heym, Michael, et Hubert Österle. « Computer-aided Methodology Engineering ». Dans Business Engineering — Die ersten 15 Jahre, 131–50. Berlin, Heidelberg : Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-642-18542-7_7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Bi, Zhuming. « Computer-Aided Engineering (CAE) ». Dans Practical Guide to Digital Manufacturing, 117–222. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70304-2_3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Miles, Ronald N. « Computer-Aided Acoustics ». Dans Mechanical Engineering Series, 137–69. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22676-3_6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Miles, Ronald N. « Computer-Aided Acoustics ». Dans Mechanical Engineering Series, 141–73. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-33009-4_6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Bertoline, Gary R., Nathan Hartman et Nicoletta Adamo-Villani. « Computer-Aided Design, Computer-Aided Engineering, and Visualization ». Dans Springer Handbook of Automation, 639–52. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-78831-7_37.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Camba, Jorge D., Nathan Hartman et Gary R. Bertoline. « Computer-Aided Design, Computer-Aided Engineering, and Visualization ». Dans Springer Handbook of Automation, 641–59. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-96729-1_28.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Lutters, Eric. « Computer-Aided Design ». Dans CIRP Encyclopedia of Production Engineering, 1–3. Berlin, Heidelberg : Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_6443-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Mourtzis, Dimitris, Sotiris Makris et George Chryssolouris. « Computer-Aided Manufacturing ». Dans CIRP Encyclopedia of Production Engineering, 1–13. Berlin, Heidelberg : Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_6550-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Computer-aided engineering"

1

Ramiller, Neil C. « Computer-aided software engineering ». Dans the 1993 conference. New York, New York, USA : ACM Press, 1993. http://dx.doi.org/10.1145/158011.158259.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

HIXSON, JEFFREY, et TOM RIECKHOFF. « Computer aided photographic engineering ». Dans 24th Joint Propulsion Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1988. http://dx.doi.org/10.2514/6.1988-3109.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

« Interactive-Computer Aided Reliability Engineering ». Dans 5th Symposium on Multidisciplinary Analysis and Optimization. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-4312.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Zaumseil, Dean, et George Hess. « Computer Aided Manufacturing and Engineering ». Dans Agricultural Machinery Conference. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1985. http://dx.doi.org/10.4271/851118.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Parrish, William, Charley Burgett et Earl McCutcheon. « Computer Aided Sensor Design Engineering ». Dans 1985 Technical Symposium East, sous la direction de John A. Jamieson. SPIE, 1985. http://dx.doi.org/10.1117/12.948852.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Gril, Rémi Zajac. « Towards computer-aided linguistic engineering ». Dans the 14th conference. Morristown, NJ, USA : Association for Computational Linguistics, 1992. http://dx.doi.org/10.3115/992133.992198.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Hsieh, Yo-Ming, et Song-Xu Tsai. « Computer Aided Iterative Design A Future Trend in Computer Aided Engineering Software ». Dans 28th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 2011. http://dx.doi.org/10.22260/isarc2011/0203.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Schonning, Alexandra, et Daniel Cox. « Enhancing Undergraduate Mechanical Engineering Education With Computer Aided Engineering ». Dans ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84508.

Texte intégral

Résumé :

This paper addresses the importance of integrating Computer Aided Engineering (CAE) software and applications in the mechanical engineering curriculum. Computer aided engineering tools described include Computer-Aided Design, Computer-Aided Manufacturing, and Computer-Aided Analysis tools such as finite element (FE) modeling and analysis. The integration of CAE software tools in the curriculum is important for three primary reasons: it helps students understand fundamental engineering principles by providing an interactive and visual representation of concepts, it provides students an opportunity to explore their creative ideas and designs while keeping prototyping costs to a minimum, and it teaches students the valuable skill of more efficiently designing, manufacturing and analyzing their products with current technology making them more marketable for their future engineering careers. While CAE has been used in the classroom for decades, the mechanical engineering program at the University of North Florida is making an aggressive effort in preparing the future engineering workforce through computer-aided project-centered education. The CAE component of this effort includes using CAE software when teaching stress, strain, dynamics, kinematics, vibrations, finite element modeling and analysis, design and design for manufacturing, manufacturing and technical communication concepts. This paper describes CAE projects undertaken in several of the mechanical engineering courses at UNF in an effort to share creative teaching techniques for others to emulate.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Dixon, Adam, Ying Liu et Rossi Setchi. « Computer-Aided Ethnography in Engineering Design ». Dans ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59832.

Texte intégral

Résumé :

Modern upsurges of innovative technologies and sciences such as the internet of things, machine learning, cheap sensor technology and cloud computing have yielded new opportunities in the area of engineering design. This paper examines the state of the art of the fuzzy front end of engineering design in capturing customer and market information through ethnography and associated techniques. The reviewed range of technologies involve multimedia capture of ethnography, data analytics, as well as traditional researcher led approaches. Intelligent ethnography is presented as an expansion to customer analytics in the offline field, to capitalise on these developments. As a result of this study, market and design teams will better understand how to capture the voice of customer, design data and market data to push for ever more relevant products and technologies. Finally, a new application named inferred engineering has been identified as a fuzzy front end evidence based ideation technique.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Dieter, William R., et Henry G. Dietz. « Computer Aided Engineering of Cluster Computers ». Dans Software (ISPASS). IEEE, 2008. http://dx.doi.org/10.1109/ispass.2008.4510737.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Computer-aided engineering"

1

Andriole, S. Computer-Aided Systems Engineering. Version 01.00.00. Fort Belvoir, VA : Defense Technical Information Center, juin 1994. http://dx.doi.org/10.21236/ada283230.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Vemuri, Ranga. Computer Aided Engineering for Reconfigurable Computing (CAERC). Fort Belvoir, VA : Defense Technical Information Center, octobre 2001. http://dx.doi.org/10.21236/ada402967.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Lamb, Joshua. Advanced tool for computer aided battery engineering (SNL). Office of Scientific and Technical Information (OSTI), novembre 2018. http://dx.doi.org/10.2172/1483463.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Pesaran, Ahmad, Chuanbo Yang, Shriram Santhanagopalan, Gi-Heon Kim, Kandler Smith et Andreas Vlahinos. Developing Battery Computer Aided Engineering Tools for Military Vehicles. Fort Belvoir, VA : Defense Technical Information Center, décembre 2013. http://dx.doi.org/10.21236/ada601037.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Smith, Mike, et Swee Leong. Computer-Aided Manufacturing Engineering Forum, first technical meeting proceedings. Gaithersburg, MD : National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5699.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Smith, Mike, et Swee Leong. Computer-aided manufacturing engineering forum, second technical meeting proceedings. Gaithersburg, MD : National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.5846.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Brockelsby, Jr, H. Computer-aided engineering annual report for calendar year 1989. Office of Scientific and Technical Information (OSTI), mars 1990. http://dx.doi.org/10.2172/6893532.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Humphrey, Watts S. CASE (Computer-Aided Software Engineering) Planning and the Software Process. Fort Belvoir, VA : Defense Technical Information Center, mai 1989. http://dx.doi.org/10.21236/ada219066.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Hartman, Joseph P., John J. Jaeger, John J. Jobst, Deborah K. Martin et James Bigham. Computer-Aided Structural Engineering (CASE) Project. User's Guide : Pile Group Analysis (CPGA) Computer Program. Fort Belvoir, VA : Defense Technical Information Center, juillet 1989. http://dx.doi.org/10.21236/ada212544.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Dierolf, David A., et Karen J. Richter. Computer-Aided Group Problem Solving for Unified Life Cycle Engineering (ULCE). Fort Belvoir, VA : Defense Technical Information Center, février 1989. http://dx.doi.org/10.21236/ada209446.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!