Se connecter

Bibliographies thématiques / Cooling

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Cooling »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 25 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Cooling ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Cooling"

1

Che Sidik, Nor Azwadi, and Shahin Salimi. "The Use of Compound Cooling Holes for Film Cooling at the End Wall of Combustor Simulator." Applied Mechanics and Materials 695 (November 2014): 371–75. http://dx.doi.org/10.4028/www.scientific.net/amm.695.371.

Texte intégral

Résumé :

Gas turbine cooling can be classified into two different schemes; internal and external cooling. In internal cooling method, the coolant provided by compressor is forced into the cooling flow circuits inside turbine components. Meanwhile, for the external cooling method, the injected coolant is directly perfused from coolant manifold to save downstream components against hot gases. Furthermore, in the latter coolant scheme, coolant is used to quell the heat transfer from hot gas stream to a component. There are several ways in external cooling. Film cooling is one of the best cooling systems f

Styles APA, Harvard, Vancouver, ISO, etc.

2

Shi, Li, Zhiying Sun, and Yuanfeng Lu. "The Combined Influences of Film Cooling and Thermal Barrier Coatings on the Cooling Performances of a Film and Internal Cooled Vane." Coatings 10, no. 9 (2020): 861. http://dx.doi.org/10.3390/coatings10090861.

Texte intégral

Résumé :

This paper presents a numerical investigation on the combined influences of film cooling and thermal barrier coatings (TBCs) on the cooling performances of a NASA C3X guide vane. The results show that: (1) film cooling on the pressure side is more effective than suction side, especially on the trailing edge where multiple cooling and thermal protection techniques include internal cooling and TBCs are necessary. (2) TBCs show positive and negative roles in improving cooling performance at the same time for the coated vane with or without film cooling. Without film cooling, TBCs show negative ro

Styles APA, Harvard, Vancouver, ISO, etc.

3

Wang, Chen, Chunhua Wang, and Jingzhou Zhang. "Parametric Studies of Laminated Cooling Configurations: Overall Cooling Effectiveness." International Journal of Aerospace Engineering 2021 (February 10, 2021): 1–15. http://dx.doi.org/10.1155/2021/6656804.

Texte intégral

Résumé :

Combing the advantages of film cooling, impingement cooling, and enhanced cooling by pin fins, laminated cooling is attracting more and more attention. This study investigates the effects of geometric and thermodynamic parameters on overall cooling effectiveness of laminated configuration, and model experiments were carried out to validate the numerical results. It is found that the increases in film cooling hole diameter and pin fin diameter both result in the increase in cooling effectiveness, but the increases in impingement hole diameter, impingement height, and spanwise hole pitch degrade

Styles APA, Harvard, Vancouver, ISO, etc.

4

Friedrichs, S., H. P. Hodson, and W. N. Dawes. "The Design of an Improved Endwall Film-Cooling Configuration." Journal of Turbomachinery 121, no. 4 (1999): 772–80. http://dx.doi.org/10.1115/1.2836731.

Texte intégral

Résumé :

The endwall film-cooling cooling configuration investigated by Friedrichs et al. (1996, 1997) had in principle sufficient cooling flow for the endwall, but in practice, the redistribution of this coolant by secondary flows left large endwall areas uncooled. This paper describes the attempt to improve upon this datum cooling configuration by redistributing the available coolant to provide a better coolant coverage on the endwall surface, while keeping the associated aerodynamic losses small. The design of the new, improved cooling configuration was based on the understanding of endwall film-coo

Styles APA, Harvard, Vancouver, ISO, etc.

5

Harrington, Mark K., Marcus A. McWaters, David G. Bogard, Christopher A. Lemmon, and Karen A. Thole. "Full-Coverage Film Cooling With Short Normal Injection Holes." Journal of Turbomachinery 123, no. 4 (2001): 798–805. http://dx.doi.org/10.1115/1.1400111.

Texte intégral

Résumé :

An experimental and computational investigation was conducted on the film cooling adiabatic effectiveness of a flat plate with full coverage film cooling. The full coverage film cooling array was comprised of ten rows of coolant holes, arranged in a staggered pattern, with short L/D=1, normal coolant holes. A single row of cooland holes was also examined to determine the accuracy of a superposition prediction of the full coverage adiabatic effectiveness performance. Large density coolant jets and high mainstream turbulence conditions were utilized to simulate realistic engine conditions. High-

Styles APA, Harvard, Vancouver, ISO, etc.

6

Ding, Yuzhang, Haocheng Ji, Rui Liu, Yuwei Jiang, and Minxiang Wei. "Study of the thermal behavior of a battery pack with a serpentine channel." AIP Advances 12, no. 5 (2022): 055028. http://dx.doi.org/10.1063/5.0089378.

Texte intégral

Résumé :

To effectively enhance the thermal security of the Li-ion battery packs used in the electric vehicle industry, novel cooling systems equipped with serpentine channels are established. Then, the heat generation model is established and verified experimentally. In this research study, the structure of the cooling channel, the coolant velocity, the coolant temperature, and the coolant flow direction are considered to be the influencing factors. The results demonstrate that, by adopting the serpentine cooling channel, a better thermal conductivity can be obtained, and the type-B cooling system pos

Styles APA, Harvard, Vancouver, ISO, etc.

7

Zulfikar, Zulfikar. "Penambahan Water Coolant Pada Cooling Tower Tipe Counter Flow." Jurnal Mesin Nusantara 1, no. 2 (2019): 85–92. http://dx.doi.org/10.29407/jmn.v1i2.13566.

Texte intégral

Résumé :

Cooling tower adalah alat penukar kalor dengan fluida kerja air dan udara yang berfungsi mendinginkan air dengan kontak langsung dengan udara yang mengakibatkan sebagian kecil air menguap. Dalam kebanyakan cooling tower yang bekerja pada sistem pendinginan udara menggunakan pompa sentrifugal untuk menggerakkan air vertikal ke atas melintasi menara. Semua cooling tower yang bekerja akan melepaskan kalor melalui kondensor, refrigeran akan melepas kalornya kepada cooling tower sehingga air menjadi panas. Selanjutnya air panas ini akan dipompakan ke cooling tower. Dalam Penelitian ini peneliti aka

Styles APA, Harvard, Vancouver, ISO, etc.

8

Zhuang, Yutao, Honglin Li, Timothy H. Lee, Bangwei Liu, and Jiahuan Cui. "Numerical investigation on cooling characteristics of an additively manufacturable composite cooling structure with swirling outflow." Journal of Physics: Conference Series 3041, no. 1 (2025): 012033. https://doi.org/10.1088/1742-6596/3041/1/012033.

Texte intégral

Résumé :

Abstract Innovative structural designs for cooling technologies play a crucial role in the advancement of next-generation aero-engines. This study proposes an additively manufacturable composite cooling structure featuring swirling coolant outflow, and its cooling characteristics are investigated using numerical simulation. The operating conditions considered include blowing ratios of 0.5 and 2.0, analyzed under conjugate heat transfer and adiabatic contexts. The findings indicate that the swirl composite cooling structure exhibits significantly higher cooling effectiveness in comparison of th

Styles APA, Harvard, Vancouver, ISO, etc.

9

Wang, J. H., J. Messner, and H. Stetter. "An Experimental Investigation on Transpiration Cooling Part II: Comparison of Cooling Methods and Media." International Journal of Rotating Machinery 10, no. 5 (2004): 355–63. http://dx.doi.org/10.1155/s1023621x04000363.

Texte intégral

Résumé :

This article attempts to provide a cooling performance comparison of various mass transfer cooling methods and different cooling media through two experiments. In the first experiment, pressurized air was used as a cooling medium and two different circular tubes were used as specimens. One is made of impermeable solid material with four rows of discrete holes to simulate film cooling, and the other consists of sintered porous material to create a porous transpiration cooling effect. The natures of transpiration cooling and film cooling including leading and trailing edge injection cooling were

Styles APA, Harvard, Vancouver, ISO, etc.

10

Song, Hanlin, Meng Zheng, Zheshu Ma, Yanju Li, and Wei Shao. "Numerical simulation of thermal performance of cold plates for high heat flux electronics cooling." Thermal Science, no. 00 (2023): 261. http://dx.doi.org/10.2298/tsci230715261s.

Texte intégral

Résumé :

High heat flow density electronic components need cooling plates with strong heat exchange capacity to maintain temperature balance. To obtain better cooling performance, four different flow channel types of cooling plates are designed, including an S-type channel, Z-type channel, mosaic channel and double-layer channel. The maximum temperature of the cooling plate, outlet temperature and pressure drop under different working conditions and coolant are analyzed by numerical simulation. The simulation results show that the double-layer channel design can effectively enhance the heat transfer ef

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Cooling"

1

Katta, Kiran Kumar. "Phase change cooling applications engine cooling /." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2008. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Chen, Ruiping. "Laser cooling of atoms for ultracold cooling." Thesis, Queen's University Belfast, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.479242.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Srikanth, Sai Aswin. "Use of Electrical Coolant Pumps in Scania’s Cooling System." Thesis, KTH, Maskinkonstruktion (Avd.), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-259681.

Texte intégral

Résumé :

The automotive industry is currently traversing through the electrification wave. Numerous manufacturers are directing focus to electrify their lineup and reduce emissions. In the frontier of heavy duty diesel trucks, electrification of auxiliary units remains an unexplored potential. An optimized cooling system functioning in sync with a controllable electric coolant pump attempts to reduce parasitic losses and emissions. The cooling flow requirements in challenging conditions may also be fulfilled. Although electric coolant pumps are found increasingly in passenger cars, the implication of i

Styles APA, Harvard, Vancouver, ISO, etc.

4

Graça, Guilherme Carrilho da 1972. "Ventilative cooling." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/66785.

Texte intégral

Résumé :

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Architecture, 1999.<br>Includes bibliographical references (p. 131-134).<br>This thesis evaluates the performance of daytime and nighttime passive ventilation cooling strategies for Beijing, Shanghai and Tokyo. A new simulation method for cross-ventilated wind driven airflow is presented . This method decouples the airflow model from the thermal model allowing for fast real weather simulation of the building thermal performance. The simulation is performed on a six-story, isolated, suburban apartment building, considered to be typi

Styles APA, Harvard, Vancouver, ISO, etc.

5

Rizvani, Lejla. "Cooling Oasis." Thesis, KTH, Arkitektur, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-298809.

Texte intégral

Résumé :

The urban heat island, UHI, is a phenomenon that occurs in all cities. This phenomenon is an effect of us humans and the environments we have built. What happens in cities are that they re-emit the suns heat and other energies trapping them in this heat island. The re-emitting happens through the pavement of the city, lack of greenery, roads and how the city is built and its geometry. Cities with skycrapers and of high density see a greater impact of the urban heat island where the wind flow is reduced and more heat is trapped and stored. The UHI is worst experienced in places with a very hot

Styles APA, Harvard, Vancouver, ISO, etc.

6

Fletcher, Daniel Alden. "Internal cooling of turbine blades : the matrix cooling method." Thesis, University of Oxford, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.360259.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

VILAFRANCA, MANGUÁN ANA. "Convesion of industrial compression cooling to absorption cooling in an integrated district heating and cooling system." Thesis, University of Gävle, University of Gävle, Department of Technology and Built Environment, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-4145.

Texte intégral

Résumé :

<p>Astra Zeneca plant in Gärtuna has many compression cooling machines for comfort that consume about 11.7 GWh of electricity per year. Many of the cooling machines are old; due to the increase of production of the plant, cooling capacity was limited and new machines have been built. Now, the cooling capacity is over-sized. Söderenergi is the district heating plant that supplies heating to Astra Zeneca plant. Due to the strict environmental policy in the energy plant, last year, a bio-fuelled CHP plant was built. It is awarded with the electricity certificate system.</p><p>The study investigat

Styles APA, Harvard, Vancouver, ISO, etc.

8

Ozmen, Emin Mehmet. "Part Cooling Analysis By Conformal Cooling Channels In Injection Molding." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/2/12609186/index.pdf.

Texte intégral

Résumé :

Straight cooling channels are the most common method of controlling part temperature in injection molding process. However, straight cooling channels are not enough to manage temperature uniformity of the parts. In this work, a numerical study is conducted to decrease cycle time and cost of the injection molded parts by using conformal cooling channels. For this purpose, the commercial injection molding simulation program Moldflow is used. The governing physical equations for injection molding were derived and presented. The assumptions of the model were checked for simple geometries by compar

Styles APA, Harvard, Vancouver, ISO, etc.

9

Omma, Henrik Nilsen. "Jet-powered cooling cores : reversing cooling flows through AGN activity." Thesis, University of Oxford, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.419330.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Aghasi, Paul P. "Dependence of Film Cooling Effectiveness on 3D Printed Cooling Holes." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1458893416.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Cooling"

1

Oxlade, Chris. Cooling. Heinemann Library, 2009.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Oxlade, Chris. Cooling. Heinemann Library, 2010.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Oxlade, Chris. Cooling. Heinemann Library, 2009.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Olama, Alaa A., ed. District Cooling. CRC Press, 2016. http://dx.doi.org/10.1201/9781315371634.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Olama, Alaa A. District Cooling. CRC Press, 2016. http://dx.doi.org/10.4324/9781315371634.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Frank, Esch, ed. Cooling off. Dominie Press, 1992.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Hill, G. B. Cooling towers. 3rd ed. Butterworths, 1990.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Manning, Linda. Cooling off. Gage Educational Pub., 1986.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

United States. Conservation and Renewable Energy Inquiry and Referral Service., ed. Passive cooling. 3rd ed. U.S. Dept. of Energy, Conservation and Renewable Energy Inquiry and Referral Service, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

United States. Conservation and Renewable Energy Inquiry and Referral Service, ed. Passive cooling. 2nd ed. U.S. Dept. of Energy, Conservation and Renewable Energy Inquiry and Referral Service, 1986.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Chapitres de livres sur le sujet "Cooling"

1

Gooch, Jan W. "Cooling." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2895.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Minty, Michiko G., and Frank Zimmermann. "Cooling." In Particle Acceleration and Detection. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-08581-3_11.

Texte intégral

Résumé :

AbstractMany applications of particle accelerators require beam cooling, which refers to a reduction of the beam phase space volume or an increase in the beam density via dissipative forces. In electron and positron storage rings cooling naturally occurs due to synchrotron radiation, and special synchrotron-radiation damping rings for the production of low-emittance beams are an integral part of electron-positron linear colliders. For other types of particles different cooling techniques are available. Electron cooling and stochastic cooling of hadron beams are used to accumulate beams of rare

Styles APA, Harvard, Vancouver, ISO, etc.

3

Tyler, Christopher J. "Cooling." In Maximising Performance in Hot Environments. Routledge, 2019. http://dx.doi.org/10.4324/9781351111553-7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

F. Schiller, Gary. "Cooling." In A Practical Approach to Scientific Molding. Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.1007/978-1-56990-687-3_10.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Estévez-Sánchez, Karen Hariantty, Carlos Enrique Ochoa-Velasco, Hector Ruiz-Espinosa, and Irving Israel Ruiz-López. "Cooling." In Smart Food Industry: The Blockchain for Sustainable Engineering. CRC Press, 2023. http://dx.doi.org/10.1201/9781003231059-10.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Schiller, Gary F. "Cooling." In A Practical Approach to Scientific Molding. Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.3139/9781569906873.010.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Zhu, Fang, and Baitun Yang. "Cooling." In Power Transformer Design Practices. CRC Press, 2021. http://dx.doi.org/10.1201/9780367816865-8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

von Zabeltitz, Christian. "Cooling." In Integrated Greenhouse Systems for Mild Climates. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-14582-7_11.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Peter, Johannes M. F., and Markus J. Kloker. "Numerical Simulation of Film Cooling in Supersonic Flow." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_5.

Texte intégral

Résumé :

Abstract High-order direct numerical simulations of film cooling by tangentially blowing cool helium at supersonic speeds into a hot turbulent boundary-layer flow of steam (gaseous H2O) at a free stream Mach number of 3.3 are presented. The stagnation temperature of the hot gas is much larger than that of the coolant flow, which is injected from a vertical slot of height s in a backward-facing step. The influence of the coolant mass flow rate is investigated by varying the blowing ratio F or the injection height s at kept cooling-gas temperature and Mach number. A variation of the coolant Mach

Styles APA, Harvard, Vancouver, ISO, etc.

10

Kaushik, S. C., S. K. Tyagi, and V. Baiju. "Solar Energy Option and Potential for Cooling." In Solar Cooling. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-42410-6_2.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Cooling"

1

Calabrese, R., and L. Tecchio. "Electron Cooling and New Cooling Techniques." In Workshop on Electron Cooling and New Cooling Techniques. WORLD SCIENTIFIC, 1991. http://dx.doi.org/10.1142/9789814539425.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Chan, Albert, Don Nguyen, Jean Chen, Chun-Chih Chen, and Michael Brooks. "Coolant Considerations for Liquid-Cooling." In 2023 39th Semiconductor Thermal Measurement, Modeling & Management Symposium (SEMI-THERM). IEEE, 2023. http://dx.doi.org/10.23919/semi-therm59981.2023.10267902.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Takeishi, K., Y. Oda, Y. Egawa, and T. Kitamura. "Film cooling with swirling coolant flow." In HEAT TRANSFER 2010. WIT Press, 2010. http://dx.doi.org/10.2495/ht100171.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Andrews, G. E., and I. M. Khalifa. "Effusion Cooling With Backside Crossflow Cooling and the Backside Coolant Mass Flow Rate Greater Than the Effusion Cooling Mass Flow." In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-95355.

Texte intégral

Résumé :

Full coverage effusion cooling was studied for a square array of 90° effusion cooling holes with backside cooling using a 5 mm depth duct air supply to the coolant holes, with the duct air mass flow rate being greater than the effusion cooling flow. This geometry represents combustor primary zone wall cooling with the dilution air or main combustion air comprising the excess backside flow rate. Active cooling was used with metal walls and 300K effusion cooling into a 27 m/s mean velocity duct flow at 770K crossflow temperature. The aim was to provide conjugate heat transfer experimental data t

Styles APA, Harvard, Vancouver, ISO, etc.

5

Derwent, P. F. "Debuncher Cooling Performance." In BEAM COOLING AND RELATED TOPICS: International Workshop on Beam Cooling and Related Topics - COOL05. AIP, 2006. http://dx.doi.org/10.1063/1.2190117.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Fuqua, Matthew N., and James L. Rutledge. "Film Cooling Superposition Theory for Multiple Rows of Cooling Holes With Multiple Coolant Temperatures." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-15252.

Texte intégral

Résumé :

Abstract The classical method of superposition has been used for several decades to provide an estimate of the adiabatic effectiveness for multiple sets of already well-characterized film cooling hole rows. In this way, design work is aided by classical superposition theory prior to higher fidelity experiments or simulations that would account for fluid dynamic interaction for which superposition cannot account. In the present work, we consider the additive effects of multiple rows of coolant holes, but now also with coolant issuing at different temperatures. There are a number of ways that co

Styles APA, Harvard, Vancouver, ISO, etc.

7

Click, Austin, Phillip M. Ligrani, Maggie Hockensmith, et al. "Louver Slot Cooling and Full-Coverage Film Cooling With a Combination Internal Coolant Supply." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-14520.

Texte intégral

Résumé :

Abstract Within the present investigation, a louver slot is employed upstream of an array full coverage film cooling holes. Cooling air is supplied using a combination arrangement, with cross-flow and impingement together. The louver consists of a row of film cooling holes, contained within a specially-designed device which concentrates, and directs the coolant from a slot, so that it then advects as a layer downstream along the test surface. This louver-supplied coolant is then supplemented by coolant which emerges from different rows of downstream film cooling holes. The same coolant supply

Styles APA, Harvard, Vancouver, ISO, etc.

8

Takeishi, Kenichiro, Yutaka Oda, Yuta Egawa, and Satoshi Hada. "Film Cooling With Swirling Coolant Flow Controlled by Impingement Cooling in a Closed Cavity." In ASME 2011 Power Conference collocated with JSME ICOPE 2011. ASMEDC, 2011. http://dx.doi.org/10.1115/power2011-55390.

Texte intégral

Résumé :

A new film cooling concept has been developed by managing the swirled film coolant induced inside a hexagonal plenum by two slant impingement jets, which are inclined at α degree toward the vertical direction and installed in a staggered position on the plenum chamber wall. Film cooling tests have been conducted by using a circular film cooling hole model mounted on a low speed wind tunnel. Heat transfer coefficient distributions of inclined jet impingements in a closed cavity was measured by naphthalene sublimation method and the film cooling effectiveness on the surface of the wind tunnel wa

Styles APA, Harvard, Vancouver, ISO, etc.

9

Kikkawa, Shinzo, Katsuji Sakaguchi, and Toyoshi Nakata. "TRANSPIRATION COOLING USING WATER AS A COOLANT." In International Heat Transfer Conference 9. Begellhouse, 1990. http://dx.doi.org/10.1615/ihtc9.680.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Galaso, Ivan, Tonko Curko, and Davor Zvizdic. "ROOM COOLING LOAD AND CEILING COOLING." In Energy and the Environment, 1998. Begellhouse, 2023. http://dx.doi.org/10.1615/1-56700-127-0.1080.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Cooling"

1

Caio, Andrea, and Jack Miller. Sustainable cooling. Parliamentary Office of Science and Technology, 2021. http://dx.doi.org/10.58248/pn642.

Texte intégral

Résumé :

Cooling is a process used across many areas of society. It is important for buildings, industrial processes and the supply of food and medicines. It is also needed for sustainable development. Yet some cooling applications contribute to climate change and the demand for cooling is rising. This POSTnote looks at UK and global demand for cooling. It highlights ways of meeting this demand that are more sustainable than conventional practices. It also outlines technology and policy options to promote these.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Kurnik, Charles W., Brian Boyd, Kate M. Stoughton, and Taylor Lewis. Cooling Tower (Evaporative Cooling System) Measurement and Verification Protocol. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1412805.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Kurnik, Charles W., Brian Boyd, Kate M. Stoughton, and Taylor Lewis. Cooling Tower (Evaporative Cooling System) Measurement and Verification Protocol. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1412806.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Pidaparti, Sandeep, Charles W. White, and Nathan Weiland. Wet Cooling Tower Cooling System Spreadsheet Model for sCO2. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1608968.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Weiss, Wolfgang, Uli Jakob, Monika Weiss, and Boaventura Cuamba. Standardized Solar Cooling Kits. IEA SHC Task 65, 2024. http://dx.doi.org/10.18777/ieashc-task65-2024-0006.

Texte intégral

Résumé :

This document is the final report of activities B4, “Standardized solar cooling kits” of the IEA SHC Task 65, “Solar Cooling for the Sunbelt Regions. The report presents experiences from 11 component and/or system suppliers of solar cooling kits, which adapted/investigated their products/concepts for Sunbelt region conditions. Moreover, several findings on system adaptations for Sunbelt regions are collected and analyzed from manufacturers, equipment providers, solar system providers and researchers.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Author, Not Given. Phasing Cooling Systems. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/984590.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Eberhard K Keil. Muon cooling channels. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/808642.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Kenny, Thomas, and Theodore H. Geballe. Thermionic Cooling Devices. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada380668.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Chandra, S., P. Fairey, III, and M. Houston. Cooling with ventilation. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/7010873.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Chen, Jingliang, Bo Shen, Lulu Liu, Lin Yao, and Yu Gao. Cooling Efficiency Improvement. Asian Development Bank Institute, 2023. http://dx.doi.org/10.56506/qjjv8928.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!