Se connecter

Bibliographies thématiques / Dental materials Evaluation / Thèses

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Dental materials Evaluation.

Thèses sur le sujet « Dental materials Evaluation »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 20 février 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 44 meilleures thèses pour votre recherche sur le sujet « Dental materials Evaluation ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.

1

Li, Jingjing. "Evaluation of different dental materials using a slugging fluidized bed." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0016/MQ58054.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Shabanian-Borojeni, Mitra. "Wear studies of enamel and some restorative materials." Title page, contents and summary only, 2001. http://web4.library.adelaide.edu.au/theses/09PH/09phs5241.pdf.

Texte intégral

Résumé :

Includes bibliographical references (leaves [1-20]). A systematic analysis of wear involving the in vitro analysis of the wear of standard composite resin and glass ionomer cements restorations under controlled conditions; and, the qualitative and quantitative investigation of wear over a range of pH's and loads which might be encountered clinically in order to develop a "wear map" of the micromorphology of wearing teeth and restorations and a systematic modeling of wear rates.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Sidhu, Sharanbir Kaur. "Resin-modified glass ionomer restorative materials : an evaluation involving microscopy." Thesis, King's College London (University of London), 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362847.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Murphy, Matthew. "Evaluation of dental implant materials and interactions with calcium phosphate solutions." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/evaluation-of-dental-implant-materials-and-interactions-with-calcium-phosphate-solutions(62aff83f-146d-4c79-85fd-0fb95c4d31e2).html.

Texte intégral

Résumé :

In this thesis, four experimental studies are reported. Two concern the surface structure of commercially relevant dental implant materials. Characterisation of four treated substrates supplied by Straumann AG was carried out. These include substrates equivalent to the commercially available SLA, SLActive and Roxolid implants. The materials vary in substrate alloy, commercially pure (grade 2) Ti and a TiZr alloy, and surface preparation treatments. All substrates are sandblasted and acid etched however post-etching one set are stored in air whilst the others are stored in saline. Within the wo

Styles APA, Harvard, Vancouver, ISO, etc.

5

Lam, Wiley T. C. "In vitro evaluation of fluoride release and artificial caries formation with selected glass polyalkenoate cements." [Hong Kong] : Faculty of Dentistry, The University of Hong Kong, 1996. http://sunzi.lib.hku.hk/HKUTO/record/B3862817X.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

林德昭 and Wiley T. C. Lam. "In vitro evaluation of fluoride release and artificial caries formation with selected glass polyalkenoate cements." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B3862817X.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Leung, Sau-kuen. "Clinical evaluation of compomers used as restorations in primary teeth." Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B2120360X.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Hse, Mei-yin Kitty, and 許美賢. "Clinical evaluation of compomer, a polyacid-modified composite resin, in primary teeth: 1 year results." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31954029.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Hse, Mei-yin Kitty. "Clinical evaluation of compomer, a polyacid-modified composite resin, in primary teeth 1 year results /." Hong Kong : Faculty of Dentistry, The University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19902232.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Leung, Sau-kuen, and 梁秀娟. "Clinical evaluation of compomers used as restorations in primaryteeth." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1998. http://hub.hku.hk/bib/B31954054.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Ho, Fu-tak. "In vitro and in vivo evaluation of an improved glass-ionomer dental cement used for the atraumatic restorative treatment (ART) technique." Hong Kong : Faculty of Dentistry, The University of Hong Kong, 1996. http://sunzi.lib.hku.hk/HKUTO/record/B38628168.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

12

何富德 and Fu-tak Ho. "In vitro and in vivo evaluation of an improved glass-ionomer dental cement used for the atraumatic restorative treatment (ART) technique." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B38628168.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

13

Richey, Mark Daniel. "In-vitro evaluation of dye leakage of an MTA apical barrier at varying setting times." Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5790.

Texte intégral

Résumé :

Thesis (M.S.)--West Virginia University, 2008.<br>Title from document title page. Document formatted into pages; contains vii, 45 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 32-37).

Styles APA, Harvard, Vancouver, ISO, etc.

14

Loureiro, Flávia Helen Furtado. "Variações termicas ocorridas na fotoativação de composito em função da comparação de metodos de avaliação." [s.n.], 2007. http://repositorio.unicamp.br/jspui/handle/REPOSIP/290106.

Texte intégral

Résumé :

Orientador: Simonides Consani<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-08T05:29:08Z (GMT). No. of bitstreams: 1 Loureiro_FlaviaHelenFurtado_M.pdf: 641905 bytes, checksum: 2615b8335b9cf2d7b6a766b05792ef4e (MD5) Previous issue date: 2007<br>Resumo: O estudo avaliou o efeito de métodos de avaliação sobre as variações térmicas, em função de diferentes tipos de fotoativação do compósito Filtek Z250. Para o método de avaliação pelo dente foram utilizados 50 incisivos bovinos hígidos, nos quais foram

Styles APA, Harvard, Vancouver, ISO, etc.

15

Taylor, Nicholas Allen. "In-vitro evaluation of dye leakage of an MTA apical barrier after irrigation with 3% soldium hypochlorite, 2% chlorhexidine, MTAD, or 17% EDTA/3% sodium hypochlorite." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5240.

Texte intégral

Résumé :

Thesis (M.S.)--West Virginia University, 2007.<br>Title from document title page. Document formatted into pages; contains vii, 40 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 30-34).

Styles APA, Harvard, Vancouver, ISO, etc.

16

Ahmed, Omnia Abdelmoneim Khidir. "An in-vitro evaluation of the efficacy of oral devices to remove dental biofilm from three prosthodontic materials." University of the Western Cape, 2019. http://hdl.handle.net/11394/6635.

Texte intégral

Résumé :

Magister Scientiae Dentium - MSc(Dent)<br>Introduction: The evolution of Dentistry witnessed an increase in fixed prostheses as opposed to removable ones. Zirconia (ZrO2) and Lithium disilicate (LDS) are becoming the material of choice in implant or tooth retained prostheses. Polyetheretherketone (PEEK) is a recent alternative as it is lighter and causes less wear of opposing retained teeth. Biofilm formation is a permanent daily struggle for patients as it can be found in nearly all surfaces exposed to the natural environment. Therefore, the interest in a new device capable of removing

Styles APA, Harvard, Vancouver, ISO, etc.

17

Lööf, Jesper. "Calcium-Aluminate as Biomaterial : Synthesis, Design and Evaluation." Doctoral thesis, Uppsala University, Department of Engineering Sciences, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9173.

Texte intégral

Résumé :

<p>In this thesis different aspects of calcium-aluminate (CA) as biomaterial are presented. Calcium aluminate is a chemically bonded ceramic with inherent properties making it suitable for use as biomaterial in some applications. In this thesis the emphasis is put on the basic chemical, physical and mechanical properties that may be achieved using the CA system as well as synthesis of the CA raw material. The basis for using CA in any application is the synthesis of the raw material. Different synthesis routes for producing CA are presented with focus on high temperature routes and the micro-s

Styles APA, Harvard, Vancouver, ISO, etc.

18

Padovani, Gislaine Cristina 1979. "Evaluation of surface restorative materials submitted to degradation by biofilm, in situ = Avaliação da superfície de materiais restauradores submetidos à degradação por biofilme, in situ." [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288142.

Texte intégral

Résumé :

Orientadores: Mário Alexandre Coelho Sinhoreti, Regina Maria Puppin Rontani<br>Tese (Doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-21T23:42:58Z (GMT). No. of bitstreams: 1 Padovani_GislaineCristina_D.pdf: 3925826 bytes, checksum: 08a5817db8d9559d4351de141cf3a5b5 (MD5) Previous issue date: 2013<br>Resumo: Os objetivos desta tese composta por dois capítulos foram: Capítulo 1- avaliar as características estruturais e a viabilidade do biofilme, in situ, acumulado após 07 dias sobre diferentes materiais restauradores

Styles APA, Harvard, Vancouver, ISO, etc.

19

Cole, David J. "Evaluation of fit for 3D printed retainers as compared to thermoform retainers." VCU Scholars Compass, 2018. https://scholarscompass.vcu.edu/etd/5332.

Texte intégral

Résumé :

ABSTRACT EVALUATION OF FIT FOR 3D PRINTED RETAINERS AS COMPARED TO THERMOFORM RETAINERS By David Cole, D.M.D. A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University Thesis Directors: Eser Tüfekçi, D.D.S., M.S., Ph.D., M.S.H.A. Professor, Department of Orthodontics Sompop Bencharit, D.D.S., M.S., Ph.D. Associate Professor and Director of Digital Dentistry, Department of General Practice Introduction: Despite recent advances in three-dimensional (3D) printing, little information is available on 3D printe

Styles APA, Harvard, Vancouver, ISO, etc.

20

Silva, Emmanuel João Nogueira Leal da 1985. "Evaluation of cytotoxicity and physicochemical properties of calcium silicate-based endodontic sealer - MTA Fillapex = Avaliação das propriedades físico-químicas e biológicas de um cimento endodôntico a base de silicato de cálcio ¿ MTA Fillapex." [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/289746.

Texte intégral

Résumé :

Orientador: Alexandre Augusto Zaia<br>Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-22T06:45:19Z (GMT). No. of bitstreams: 1 Silva_EmmanuelJoaoNogueiraLealda_D.pdf: 1714957 bytes, checksum: f1c68cf66ee3885a81240bb463ccf365 (MD5) Previous issue date: 2013<br>Resumo: O cimento endodôntico obturador MTA Fillapex® foi criado numa tentativa de aliar as propriedades físico-químicas e a capacidade seladora dos cimentos resinosos às excelentes propriedades biológicas do agregado trióxido mineral (MTA). Entretanto,

Styles APA, Harvard, Vancouver, ISO, etc.

21

Abouelleil, Sayed Hazem. "Dental composite properties evaluation : from experimental approaches to the prerequisite of a chewing bench." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSE1054/document.

Texte intégral

Résumé :

La littérature scientifique révèle que les résultats in vitro sur les matériaux dentaires ont une faible corrélation avec le comportement clinique. Les tests standardisés aux normes fournissent des informations précieuses et pertinentes sur les propriétés des matériaux dentaires, et permettent aussi de comparer les résultats de différents instituts. Cependant, le développement de nouveaux matériaux à partir de nouvelles formulations chimiques nécessite une amélioration des méthodes d'évaluation. Ce travail de recherche est réalisé dans le but d'approfondir les connaissances sur les méthodes d'

Styles APA, Harvard, Vancouver, ISO, etc.

22

Rodrigues, Raquel Viana 1988. "Avaliação por meio da tomografia de coerência óptica do esmalte bovino restaurado por diferentes materiais frente ao desafio cariogênico = Evaluation of bovine enamel restored with different materials submitted to cariogenic challenge using optical coherence tomography." [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288859.

Texte intégral

Résumé :

Orientadores: Fernanda Miori Pascon, Regina Maria Puppin-Rontani<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-22T17:11:37Z (GMT). No. of bitstreams: 1 Rodrigues_RaquelViana_M.pdf: 3224342 bytes, checksum: 289b603a5c43d3b51b1c166eb9086408 (MD5) Previous issue date: 2013<br>Resumo: O objetivo neste estudo in vitro foi analisar o esmalte bovino restaurado com diferentes materiais após o desafio cariogênico por meio da Tomografia de Coerência Óptica (OCT). Vinte e quatro incisivos bovinos foram seleci

Styles APA, Harvard, Vancouver, ISO, etc.

23

Naasan, Mohamad A. "Evaluation of glass ionomer cement restorations : a confocal microscopical study." Thesis, King's College London (University of London), 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299073.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

24

CARDOSO, Gina Maria Coelho de Souza. "Avaliação das características fisico-químicas de géis de fluor de uso odontológico profissional." Universidade Federal de Campina Grande, 2014. http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/342.

Texte intégral

Résumé :

Submitted by Johnny Rodrigues (johnnyrodrigues@ufcg.edu.br) on 2018-04-05T19:46:22Z No. of bitstreams: 1 GINA MARA COELHO DE SOUZA CARDOSO - DISSERTAÇÃO PPG-CEMat 2014..pdf: 1501065 bytes, checksum: e02311753867e448c8a544a0dd42857f (MD5)<br>Made available in DSpace on 2018-04-05T19:46:22Z (GMT). No. of bitstreams: 1 GINA MARA COELHO DE SOUZA CARDOSO - DISSERTAÇÃO PPG-CEMat 2014..pdf: 1501065 bytes, checksum: e02311753867e448c8a544a0dd42857f (MD5) Previous issue date: 2014-07-17<br>O uso clínico de géis de flúor para aplicação tópica por profissionais está indicado para prevenção e trata

Styles APA, Harvard, Vancouver, ISO, etc.

25

Le, Roux Andre Rayne. "Design and evaluation of alumina/feldspar resin infiltrated dental composite materials." Thesis, 2008. http://hdl.handle.net/10321/430.

Texte intégral

Résumé :

Submitted in fulfilment of the degree of Doctor of Dental Material Science in the Department of Dental Services, Faculty of Health Sciences, Durban University of Technology, Durban, South Africa, 2008.<br>Introduction: Incorporating a feldspar chemical bond between alumina filler particles is expected to increase the wear resistant and flexural strength properties, while reducing flexibility of dental composites. Aims and Objectives: An investigation was carried out to evaluate the influence of the feldspar chemical bonding between alumina filler particles on wear, flexural strength and fl

Styles APA, Harvard, Vancouver, ISO, etc.

26

Chong, Voon Joe. "PREPARATION AND EVALUATION OF NOVEL ANTIBACTERIAL DENTAL RESIN COMPOSITES." Thesis, 2013. http://hdl.handle.net/1805/3353.

Texte intégral

Résumé :

Indiana University-Purdue University Indianapolis (IUPUI)<br>Both quaternary ammonium bromide (QAB) and furanone derivatives were synthesized, characterized and formulated into dental resin composites for improved antibacterial properties. Compressive strength (CS) and S. mutans viability were used to evaluate the mechanical strength and antibacterial activity of the restoratives. The effects of chain length, loading, saliva and aging on CS and S. mutans viability were investigated. Chapter 2 describes how we studied and evaluated the formulated antibacterial resin composites by incorpor

Styles APA, Harvard, Vancouver, ISO, etc.

27

Boldaji, Abdollah. "Clinical evaluation of facet materials in fixed prosthodontics." Doctoral thesis, 2006. http://www.nusl.cz/ntk/nusl-268908.

Texte intégral

Résumé :

MUDr. BOLDAJI, Abdollah The author in his PhD thesis deals with the assessment of long-term stability of commonly used bevel crown. The work deals with the changes in color, shape, surface integrity, marginal adaptation and the state of the surrounding tissues to determine the ideal facet material.

Styles APA, Harvard, Vancouver, ISO, etc.

28

Richards, Philip S. "Light-cured periodontal dressing a clinical evaluation : a thesis submitted in partial fulfillment ... periodontics ... /." 1988. http://books.google.com/books?id=n0Y_AAAAMAAJ.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

29

Shabanian-Borojeni, Mitra. "Wear studies of enamel and some restorative materials / Mitra Shabanian-Borojeni." Thesis, 2001. http://hdl.handle.net/2440/19796.

Texte intégral

Résumé :

Includes bibliographical references (leaves [1-20]).<br>xxi, 168, [20] leaves : ill. (some col.) ; 30 cm.<br>A systematic analysis of wear involving the in vitro analysis of the wear of standard composite resin and glass ionomer cements restorations under controlled conditions; and, the qualitative and quantitative investigation of wear over a range of pH's and loads which might be encountered clinically in order to develop a "wear map" of the micromorphology of wearing teeth and restorations and a systematic modeling of wear rates.<br>Thesis (Ph.D.)--University of Adelaide, Dept. of Dentistry

Styles APA, Harvard, Vancouver, ISO, etc.

30

Somers, Grant Brandon. "An evaluation of the colours of base metal alloy oxide layers, and its effects on the shade of base metal alloy metal-ceramic restorations." Thesis, 1997. http://hdl.handle.net/10321/1979.

Texte intégral

Résumé :

Dissertation submitted in compliance with the requirements for the Master's Degree in Technology: Dental Technology, Technikon Natal, 1997.<br>Globally, difficulties are being experienced by the dental world to match manufactured prosthetic restorations with natural tooth colour. The primary objective of this study was therefore to evaluate the colour of five different metalceramic base metal alloy oxide layers, and the effects of each oxide layer on the shade of the porcelain applied to its surface. The increase in the cost of gold alloys in the dental industry has influenced manufacture

Styles APA, Harvard, Vancouver, ISO, etc.

31

Chao, Tzu-Hsuan, and 趙子萱. "Fiber Types Used in Dental Filling Composite Materials: Preparation Technique and Property Evaluation." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/86539256387914988461.

Texte intégral

Résumé :

碩士<br>中臺科技大學<br>醫學工程暨材料研究所<br>101<br>Dental filling composite material is used a common material for the treatment of damaged teeth. This study uses Intermediate Restorative Material (IRM®) as matrix and polylactic acid (PLA) and low melting point polylactic acid (LMPLA) fiber as reinforcing material to make the IRM®/LMPLA/PLA composite filling material. According to a previous study of this laboratory, the zinc-oxide powder and eugenol solvent are mixed with a ratio of 3:1, and then added with different wt% of LMPLA/PLA fiber or non-woven. The setting time, compressive strength, solubility an

Styles APA, Harvard, Vancouver, ISO, etc.

32

Waddell, John Neil. "The evaluation of the applicability of using gold plating to enhance the predictability and strength of base metal post ceramic gold solder joints when using a flux that does not discolour the porcelain." Thesis, 1993. http://hdl.handle.net/10321/2160.

Texte intégral

Résumé :

Dissertation submitted in compliance with the requirements for the Master's Diploma in Technology: Dental Technology, Technikon Natal, 1993.<br>The unpredictability of solder joints in dental base metal alloys constitute a major problem. This study aimed to establish whether gold plating the joint surfaces of a metal ceramic base metal alloy prior to postceramic soldering would enhance the predictability of the soldering method and joint strength. 150 standardised test specimens were prepared from 3 Oegussa dental alloys, viz Resistal P (Nier), Oegulor M (AUPt) and Realor (PdAU). The Re

Styles APA, Harvard, Vancouver, ISO, etc.

33

Wu, Hung-Chun, and 吳宏駿. "Evaluation of Machinability and Properties of Novel Glass－Ceramic Materials for Dental All-Ceramic Crowns." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/91517216139135857460.

Texte intégral

Résumé :

碩士<br>大葉大學<br>機械工程研究所碩士班<br>96<br>Dental ceramic applied to oral technology has been two hundred years of history. All-ceramic crowns in the production technology and components also increasingly progress. A glass-ceramic crown as the main ingredients in commercial products occupy an important position. The reason is that glass-ceramic glass can be controlled through the crystallization of the extent of the production of polycrystalline. Also can change the composition and the elements required of glass by the nature of glass-ceramic. Calcium-mica is known as one of fluorophlogopite type mica.

Styles APA, Harvard, Vancouver, ISO, etc.

34

AlRasheed, Rawan S. "In vitro evaluation of polymerization energy for bulk fill composites." Thesis, 2016. http://hdl.handle.net/1805/10275.

Texte intégral

Résumé :

Indiana University-Purdue University Indianapolis (IUPUI)<br>Recently, the concept of “bulk-fill” resin-based composites (RBCs) has been re-emphasized, with claimed improvements in depth of cure (DOC) with similar mechanical properties and comparable adaptation to walls and margins relative to conventional composite. More research is needed to carefully examine the properties of these new materials. The objective of this study was to measure the light energy, microhardness (VHN), and elastic modulus across the depth of one conventional and three bulk-fill RBCs. Materials and Methods: Three c

Styles APA, Harvard, Vancouver, ISO, etc.

35

Jain, Vishal V. "Evaluation of Second Generation Indirect Composite Resins." Thesis, 2008. http://hdl.handle.net/1805/1702.

Texte intégral

Résumé :

Indiana University-Purdue University Indianapolis (IUPUI)<br>Indirect composites were introduced so that the composites can be cured extraorally to improve the degree of conversion and other material properties. These materials are indicated as long term full coverage dental restorative materials. However the mechanical and physical properties of new Second Generation Indirect Composites for this particular application have not been fully evaluated. The purpose of the study was to compare the appropriateness of the four commercially available laboratory composite resins for application as lo

Styles APA, Harvard, Vancouver, ISO, etc.

36

Sun, Ming. "A laboratory evaluation of detail reproduction, contact angle, and tear strength of three elastomeric impression materials." Thesis, 2011. http://hdl.handle.net/1805/2802.

Texte intégral

Résumé :

Indiana University-Purdue University Indianapolis (IUPUI)<br>Fabrications of desirable fixed or removable dental prostheses depend upon accurate casts or dies. Recently, the most frequently used impression materials have been polyether (PE) and polyvinyl siloxane (PVS). However, both have their limitations: PVS is inherently hydrophobic, and PE is rigid. In order to take advantage of the desirable qualities of both PVS and PE impression materials, a new generation of impression material is being developed called vinyl polyether silicone (VPES, GC). The purpose of the present study was to comp

Styles APA, Harvard, Vancouver, ISO, etc.

37

Wasson, Waletha. "Evaluation criteria for the color appearance match of esthetic restorative materials with the human dentition an empirical analysis and its application to dental education : a thesis submitted in partial fulfillment ... for the degree of Master of Science in Restorative Dentistry ... /." 2001. http://catalog.hathitrust.org/api/volumes/oclc/68962579.html.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Huang, Sung-En 1980. "Effect of HA-coating and HF etching on experemental zirconia implant evaluation using in vivo rabbit model." Thesis, 2010. http://hdl.handle.net/1805/2366.

Texte intégral

Résumé :

Indiana University-Purdue University Indianapolis (IUPUI)<br>The objective of this study was to evaluate the in vivo performance of the hydroxyapatite (HA) coating and hydrofluoric acid (HF) etching zirconia (ZrO) implants and to compare the result with titanium (Ti) implants treated in a similar manner. A total of four different implant types were tested in this study. Threaded zirconia implants with HA coating (Test 1) and zirconia implants with HF-treated surfaces (Test 2) were used to compare to the same size of titanium implants treated in identical fashion (control 1 and control 2). Al

Styles APA, Harvard, Vancouver, ISO, etc.

39

Rayes, Steven K. "An evaluation of pupectomies utilizing Vitapex root canal filling material in primary anteriors and molars a retrospective study : a thesis submitted in partial fulfillment ... for the degree of Master of Science in the Department of Orthodontic and Pediatric Dentistry ... /." 2003. http://catalog.hathitrust.org/api/volumes/oclc/68962686.html.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Whatley, Jenny J. (Jenny Johnson) 1982. "An in-vitro evaluation on the biocompatibility of resilon by the microbiota of the infected root canal utilizing an agar disc diffusion assay." Thesis, 2012. http://hdl.handle.net/1805/3093.

Texte intégral

Résumé :

Indiana University-Purdue University Indianapolis (IUPUI)<br>Resilon is a resin-based obturation material that claims to create a monoblock through bonding of RealSeal sealer to the dentin walls and to the core material. Resilon is comprised of a biodegradable polymer, polycaprolactone, and inorganic fillers. Resilon has been shown to undergo enzymatic hydrolysis by bacterial enzymes such as lipase. This study aims to demonstrate if bacteria found within the infected root canal system are capable of degrading Resilon utilizing an agar disc hydrolysis method. A 0.1-percent Resilon emulsion and

Styles APA, Harvard, Vancouver, ISO, etc.

41

Tsai, Pei-hua, and 蔡佩樺. "Preparation and Evaluation of Chitosan/CaSO4/platelet Rich Plasma Microspheres as Dental Implant Material." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/93381570916861294361.

Texte intégral

Résumé :

碩士<br>義守大學<br>生物醫學工程學系碩士班<br>95<br>Periodontal disease and bone cancer might cause severe alveolus bone loss. One common used therapy to treat this disease is so-called debridement. After that, a bone conductive material is put into defect of alveolus bone to improve the regeneration of bony tissues. Thus, the purpose of the thesis is to prepare chitosan/CaSO4 microspheres, by using a high voltage electrostatic system, to act as dental implant (filling) materials. Besides, platelet gel that enriched growth factors are also used an ingredient to prepare chitosan/CaSO4/PRP microspheres which pro

Styles APA, Harvard, Vancouver, ISO, etc.

42

Trindade, Carlos Otavio Cançado. "Fit evaluation of a castable ceramic material in intracoronal restorations a thesis submitted in partial fulfillment ... restorative dentistry, operative ... /." 1988. http://books.google.com/books?id=GHo9AAAAMAAJ.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

43

Yanishen, I. V., O. V. Sidorova, and V. Horiushko. "Providing the clinical and technological quality the supporting dental gypsum᾽s material: comparative evaluation the physical and mechanical properties." Thesis, 2015. http://repo.knmu.edu.ua/handle/123456789/12385.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

44

Lin, Wen Hung, and 林文鴻. "Evaluation on the Physical and Chemical Properties and the Biocompatibility of the Dental Metallic Material Implanted in an Acid Etching Surface." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/63974831494383950353.

Texte intégral

Résumé :

碩士<br>國立中興大學<br>生命科學院碩士在職專班<br>92<br>Abstract The object of this research is titanium, a metal material of synthetic implant, and this research evaluates respectively the three categories of (1) the nature of the material, (2) the material and cell culture, and (3) the material and organ culture. Having been etched, the surface layer of titanium has mm-sized beehive-like coarse holes, the roughness of which can be as big as 2.28μm, which is bigger than the holes commonly seen on the etching surface. We can find in the analysis on the component parts of the surface layer that the lay

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!