Se connecter

Bibliographies thématiques / Disc brakes / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Disc brakes.

Articles de revues sur le sujet « Disc brakes »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 27 janvier 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Disc brakes ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Wadile, Ratnajeet. "Thermal Analysis of a Disc." International Journal for Research in Applied Science and Engineering Technology 9, no. 10 (October 31, 2021): 1910–15. http://dx.doi.org/10.22214/ijraset.2021.38476.

Texte intégral

Résumé :

Abstract: The disk brakes are special mechanized parts in a vehicle attached with the tires to help reduce the velocity of the vehicle. As the brake pads caused friction with the disc brakes, there is a temperature rise. Due to this there are great chances of disc brake’s failure if temperature rises above some permissible limit. Solidworks and ANSYS are the design and analysis tools which are used to accomplish this project. The disc brake was designed using Solidworks and it was analysed in ANSYS workbench. The main aim of this project is to analyse two-disc brakes manufactured with differen

Styles APA, Harvard, Vancouver, ISO, etc.

2

Pradhan, Dr Swastik, Santhosh M, Palepu rithvik, and Katkam Ravi Teja. "Modelling and analysis of ventilated disc Brakes using Creo and FEA software." International Journal for Research in Applied Science and Engineering Technology 10, no. 6 (June 30, 2022): 1359–70. http://dx.doi.org/10.22214/ijraset.2022.43959.

Texte intégral

Résumé :

Abstract: An important part of a car's safety system is the brakes. Brakes are easily worn, leading to unpredictable disasters. To avoid this, ventilated disc brakes are used, which helps the brakes to work well in stressful conditions and high temperatures. The materials used play an important role in determining performance. The main objective of this research work is to analyze the current design and conduct a suitable brake rotor analysis to improve its performance. Existing brake disc designs are modeled in Creo and analyzed with software. The material grades used in this study were perfo

Styles APA, Harvard, Vancouver, ISO, etc.

3

Sawczuk, Wojciech, Armando Miguel Rilo Cañás, Dariusz Ulbrich, and Jakub Kowalczyk. "Modeling the Average and Instantaneous Friction Coefficient of a Disc Brake on the Basis of Bench Tests." Materials 14, no. 16 (August 23, 2021): 4766. http://dx.doi.org/10.3390/ma14164766.

Texte intégral

Résumé :

This article presents the results of tests conducted on the average and instantaneous friction coefficients of railway vehicle disc brakes. The tests were carried out independently of various states of wear on the friction linings and the brake disc. The requirements of the International Union of Railways (UIC) regarding the approval of brake linings for use were taken into account. Based on many years of research using a brake bench to test railway disc brakes, the authors developed multiple regression models for the average friction coefficient and fluctuations (tolerances) in the instantane

Styles APA, Harvard, Vancouver, ISO, etc.

4

Afnison, Wanda, Wagino Wagino, Nuzul Hidayat, Muslim Muslim, and Masykur Masykur. "Analysis Thermal Pada Solid dan Ventilated Disk Brake Pada Mobil Hemat Energy Pagaruyuang Team UNP." Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi 7, no. 1 (June 24, 2021): 44. http://dx.doi.org/10.35308/jmkn.v7i1.3699.

Texte intégral

Résumé :

This study discusses the thermal analysis of the disc brakes used in UNP energy-efficient cars. There are three types of disc brake designs that are simulated, namely solid disc brake, circular hole ventilated and vane ventilated types. Using the finite element method, the three disc brake designs analyzed the characteristics of the heat received from the braking process. Disc brakes with better heat dissipation ability are the most suitable type to use. From the simulation results, the ventilated (circular hole) disc brakes have the best heat dissipation capability with a maximum temperature

Styles APA, Harvard, Vancouver, ISO, etc.

5

Kristyawan, Yudi, and Muchammad Asro Rofi’i. "Early Detection of Overheating in Motorcycle Disc Brakes Based on Arduino." Inform : Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi 6, no. 1 (January 31, 2021): 21–27. http://dx.doi.org/10.25139/inform.v6i1.3348.

Texte intégral

Résumé :

The braking system is very important on a motorcycle. The primary function of the braking system is to slow down and even stop the motorcycle. The braking system using disc brakes on motorcycles is commonly used today, especially on automatic transmission motorcycles. One of the disadvantages of disc brakes is the heat caused by the disc's friction with the brake pads if you apply continuous braking. This continuous braking is often done by a motor rider when crossing downhill roads in mountainous areas. Excessive heat in the disc brakes causes the brake fluid to boil, resulting in air bubbles

Styles APA, Harvard, Vancouver, ISO, etc.

6

García-León, R. A., N. Afanador-García, and J. A. Gómez-Camperos. "Mechanical and Dynamic Maps of Disc Brakes under Different Operating Conditions." Fluids 6, no. 10 (October 13, 2021): 363. http://dx.doi.org/10.3390/fluids6100363.

Texte intégral

Résumé :

The operating conditions during the braking process in an automobile affect the tribological contact between the pad and disc brake, thus, influencing the times and distances of braking and, in a more significant way, the safety of the braking process. This mathematical work aimed to provide a general visualization of the disc brake’s mechanical, dynamic, and thermal behavior under different operating conditions through 2D maps of the power dissipated, braking time, and braking distance of a disc brake with a ventilation blade N- 38 type. However, the dissipated energy on the disc brake in ter

Styles APA, Harvard, Vancouver, ISO, etc.

7

Yin, Yan, Jiusheng Bao, Jinge Liu, Chaoxun Guo, Tonggang Liu, and Yangyang Ji. "Braking performance of a novel frictional-magnetic compound disc brake for automobiles." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233, no. 10 (August 3, 2018): 2443–54. http://dx.doi.org/10.1177/0954407018791056.

Texte intégral

Résumé :

Disc brakes have been applied in various automobiles widely and their braking performance has vitally important effects on the safe operation of automobiles. Although numerous researches have been conducted to find out the influential law and mechanism of working condition parameters like braking pressure, initial braking speed, and interface temperature on braking performance of disc brakes, the influence of magnetic field is seldom taken into consideration. In this paper, based on the novel automotive frictional-magnetic compound disc brake, the influential law of magnetic field on braking p

Styles APA, Harvard, Vancouver, ISO, etc.

8

Chen, Dong Fa, Li Ma, Xue Xun Guo, and Qi Zhang. "Parametric FEM Analysis of Disc Brake." Applied Mechanics and Materials 483 (December 2013): 199–202. http://dx.doi.org/10.4028/www.scientific.net/amm.483.199.

Texte intégral

Résumé :

A parametric FEM analysis method is introduced for the design of disc brakes. The basic process of parametric FEM modeling is summarized, the FEM model of disc brakes is established. Finally, the parametric FEM strength and stiffness analysis are conducted for the typical disc brake assembly.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Zhang, Hai Tao, Ying Jun Dai, Yu Jing Jia, and Guang Zhen Cheng. "The Design of Disc Brake for Mine Hoist in Civil Engineering." Advanced Materials Research 568 (September 2012): 212–15. http://dx.doi.org/10.4028/www.scientific.net/amr.568.212.

Texte intégral

Résumé :

This article will describe the research status and the features of control system of the disc brakes of mine hoist. The disc brakes consist of body, outer cylinder, cylinder, piston, ring, disc springs, plunger, gate disk and other components. The disc brakes use the pre-load of disc springs to force the piston to move towards the brake disc, push the brake pads out, then the brake pads and drum brake disc contact and resulting in positive pressure, then the formation of friction produce a braking torque. When the brake system loose pads, the cylinder is filled with the pressure oil, which mak

Styles APA, Harvard, Vancouver, ISO, etc.

10

Wen, Min. "An Analysis of the Coupling Between Temperature and Thermal Stress of Disc Brakes Based on Finite Element." International Journal of Heat and Technology 39, no. 6 (December 31, 2021): 1819–27. http://dx.doi.org/10.18280/ijht.390616.

Texte intégral

Résumé :

Disc brakes have been more widely used in recent years due to its many merits such as fast heat absorption and dissipation, and resistance to water fade. Since it’s difficult to describe the failure of brakes under complex working conditions in only a few times of thermal-structural coupling simulations, this paper analyzed the coupling between temperature and thermal stress of disc brakes under multiple continuous braking conditions. At first, a 3D model of bus disc brake was built in ABAQUS, and its braking motion and dynamic parameters, heat flux density, convective heat dissipation coeffic

Styles APA, Harvard, Vancouver, ISO, etc.

11

Seelam, Anil Babu, Nabil Ahmed Zakir Hussain, and Sachidananda Hassan Krishanmurthy. "Design and analysis of disc brake system in high speed vehicles." International Journal for Simulation and Multidisciplinary Design Optimization 12 (2021): 19. http://dx.doi.org/10.1051/smdo/2021019.

Texte intégral

Résumé :

Brakes are the most important component of any automobile. Brakes provide the ability to reduce or bring automobile to a complete stop. The process of braking is usually achieved by applying pressure to the brake discs. The main objective of this research paper is to propose an appropriate design and to perform analysis of a suitable brake rotor to enhance the performance of the high-speed car. The design of the brake disc is modelled using Solid works and the analysis is carried out using Ansys software. The analysis has been conducted by considering stainless steel and grey cast iron using s

Styles APA, Harvard, Vancouver, ISO, etc.

12

Cui, Shi Hai, Jian Yuan, and Hai Yan Li. "The Thermo-Mechanical Coupling Analysis of SiCp/A356 Composites Brake Disc of a Passenger Car." Advanced Materials Research 750-752 (August 2013): 28–32. http://dx.doi.org/10.4028/www.scientific.net/amr.750-752.28.

Texte intégral

Résumé :

The thermo-mechanical coupling finite element models of disc brakes made of aluminum metal matrix composites and cast iron for a passenger car under different emergency braking conditions were deveoped. And the braking process for brake disc was simulated by using finite element method. By analyzing distributions of the temperature field and stress field of the two brake discs with different thickness under emergency braking conditions, the weight reduction of the brake discs by using aluminum metal matrix composites substrate for cast irons was discussed and the simulation resusts showed that

Styles APA, Harvard, Vancouver, ISO, etc.

13

Hesse, David, Christopher Hamatschek, Klaus Augsburg, Thomas Weigelt, Alexander Prahst, and Sebastian Gramstat. "Testing of Alternative Disc Brakes and Friction Materials Regarding Brake Wear Particle Emissions and Temperature Behavior." Atmosphere 12, no. 4 (March 29, 2021): 436. http://dx.doi.org/10.3390/atmos12040436.

Texte intégral

Résumé :

In this study, different disc brakes and friction materials are evaluated with respect to particle emission output and characteristic features are derived. The measurements take place on an inertia dynamometer using a constant volume sampling system. Brake wear particle emission factors of different disc concepts in different sizes are determined and compared, using a grey cast iron disc, a tungsten carbide-coated disc and a carbon ceramic disc. The brakes were tested over a section (trip #10) novel test cycle developed from the database of the worldwide harmonized Light-Duty vehicles Test Pro

Styles APA, Harvard, Vancouver, ISO, etc.

14

Fu, Chuan Qi, Zhou Wang, Bin Li, and Chi Yu. "The Dynamics Simulation of Braking Process on Automobile Disc Brake." Advanced Materials Research 139-141 (October 2010): 2658–61. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.2658.

Texte intégral

Résumé :

For a certain type of automobile disc brakes, brake discs and friction linings were modeled by Pro/E. The dynamics simulations of braking process on disc brake were performed by the frictional contact algorithm and nonlinear finite element method. Distribution of stress, strain and displacement on the brake parts were investigated with different initial velocity. Analysis results shown that redistributions of stress and strain had occurred on the face of brake disc and friction linings in braking process. Meanwhile, the increased initial velocity resulted in increased stress and stain. Besides

Styles APA, Harvard, Vancouver, ISO, etc.

15

Shirose, Burhanuddin, Kunal Yadav, LS Meenatchi, and K. Vedhanarayan. "Robotic arm for brake performance testing." Journal of Physics: Conference Series 2251, no. 1 (April 1, 2022): 012002. http://dx.doi.org/10.1088/1742-6596/2251/1/012002.

Texte intégral

Résumé :

Abstract Bikes require their brakes to be tested. There are adequately defined conditions under which these tests need to be performed: the brake pedal has to be pressed by a constant force. This force varies depending on the standardized test, but the value remains constant under each standard. No bike brake is perfect and thus has imperfections like disc thickness variation and disc misalignment. These imperfections cause judder due to which force experienced by the brakes under a specific pedal position varies too. This can create errors in tests and thus needs to be overcome for proper per

Styles APA, Harvard, Vancouver, ISO, etc.

16

Feier, Ioan, Joseph Way, and Rob Redfield. "Bicycle Disc Brake Thermal Performance: Combining Dynamometer Tests, Bicycle Experiments, and Modeling." Proceedings 49, no. 1 (June 15, 2020): 100. http://dx.doi.org/10.3390/proceedings2020049100.

Texte intégral

Résumé :

High-power bicycle disc braking can create excessive temperatures and boiling brake fluid, resulting in performance degradation and damage. The goal of this work is to understand brake friction performance and thermal behavior for bicycle disc brakes. A previously described disc braking dynamometer is used to assess brake pad performance of sintered metallic brake pads, organic brake pads, and ‘power’ organic pads in up to 400 W of braking power. The friction coefficient is found to be dependent on both temperature and normal force. Friction curve fits are provided for temperatures between 300

Styles APA, Harvard, Vancouver, ISO, etc.

17

Pawar, Abhijeet Vasant. "Design and Development of Braking and Wiring Systems in Go-Kart." International Journal for Research in Applied Science and Engineering Technology 9, no. VII (July 15, 2021): 924–32. http://dx.doi.org/10.22214/ijraset.2021.36506.

Texte intégral

Résumé :

This paper is aimed to calculate and numerically analyse the effectiveness of Disc brakes before and after manufacturing of full scale Go-kart. Disc brakes are developed over time to time for being a reliable method of decelerating and stopping a vehicle. There are different designs of disk brake systems for various applications. This review gives an in depth description of various geometries of the components and therefore the materials utilized in a disk brake system. In spite of all the involvements, there are still many operational issues associated with disc brakes that need to be underst

Styles APA, Harvard, Vancouver, ISO, etc.

18

Dragomir, George, Rares Pancu, Geza Husi, Liviu Georgescu, and Horia Beles. "Studies about Reflected Temperature Variation for the Car Brake Disc." Applied Mechanics and Materials 822 (January 2016): 135–40. http://dx.doi.org/10.4028/www.scientific.net/amm.822.135.

Texte intégral

Résumé :

An exact measurement of the disc brakes car temperature present difficulties, because the higher thermal stress is produced on the shiny metallic surface, which are in movement and in sliding contact with the brake pads. If an infrared camera is used for the thermal evaluating of the disc brakes, an important factor that must be considered is the reflected temperature. The aim of this research is to study the modification of the reflected temperature in correlation with the disk brake temperature and to establish a relationship for the estimation of this variation.

Styles APA, Harvard, Vancouver, ISO, etc.

19

García-León, R. A., N. Afanador-García, and J. A. Gómez-Camperos. "Numerical Study of Heat Transfer and Speed Air Flow on Performance of an Auto-Ventilated Disc Brake." Fluids 6, no. 4 (April 16, 2021): 160. http://dx.doi.org/10.3390/fluids6040160.

Texte intégral

Résumé :

In the braking system, the heat dissipation generated by the friction between the disc and pad should be evacuated as quickly as possible. In this work, five common different automotive disc brakes were studied through mathematical theories of heat transfer and numerical methods using the ANSYS software. In addition, a direct comparison between experimental, theoretical, and simulation values found in the open literature was performed to propose a disc brake with an improved geometry in terms of dissipation of heat transfer. The numerical results were considered to propose two possible solutio

Styles APA, Harvard, Vancouver, ISO, etc.

20

Selvanathan, P. Sylvester, and R. Govindaraj. "Enhanced Temperature Control in Disc Brakes." Bonfring International Journal of Industrial Engineering and Management Science 7, no. 1 (March 31, 2017): 05–08. http://dx.doi.org/10.9756/bijiems.8316.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Joshi, Bhuvnesh. "Modification of Disc Brakes Using Rotating Brake Pads." IOSR Journal of Mechanical and Civil Engineering 7, no. 3 (2013): 43–45. http://dx.doi.org/10.9790/1684-0734345.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Jiang, Jun Sheng. "Analysis on Wet Multi-Disc Brake Based on ABAQUS." Advanced Materials Research 421 (December 2011): 427–30. http://dx.doi.org/10.4028/www.scientific.net/amr.421.427.

Texte intégral

Résumé :

In this paper, take the wet multi-disc brake of underground engineering truck as research object, combined with the complex modal analysis theory and FEM, and establish the FEM model of the wet multi-disc brake based on ABAQUS. Through complex modal analyzing on the wet multi-disc brake, obtain the main factors of brake noise during braking and provide improved measures to decrease the brake noise combined with analysis results. It provides a theoretical basis in the design of wet multi-disc brakes and has a practical engineering significance.

Styles APA, Harvard, Vancouver, ISO, etc.

23

Raikar, Dattaraj, and Omkar Sadwilkar. "Disc Brake Run-Out Detection System." International Journal for Research in Applied Science and Engineering Technology 10, no. 12 (December 31, 2022): 2028–32. http://dx.doi.org/10.22214/ijraset.2022.48333.

Texte intégral

Résumé :

Abstract: Disc brakes failure had become a major issue in vehicles these days, some of the common reasons for brake failures are reported to be a disc wobble, as it affects the overall braking, and the wobble caused on disc brakes generates a shudder at the passenger cabin through the brake pedal, which adds to a jagged movement of the vehicle. After carrying out deep research on this issue, an idea was formed to sense the wobble on the disc rotor. So, based on this idea a new concept for the Data Acquisition system is presented, namely: a Brake Disc Run-Out Sensor, which is designed on browse

Styles APA, Harvard, Vancouver, ISO, etc.

24

Belhocine, Ali, and Wan Zaidi Wan-Omar. "CFD modeling and computation of convective heat coefficient transfer of automotive disc brake rotors -Modelado CFD y cálculo de la transferencia de coeficientes de calor por convección de rotores de freno de disco automotores." Revista Científica 2, no. 29 (May 1, 2017): 116. http://dx.doi.org/10.14483/udistrital.jour.rc.2017.29.a1.

Texte intégral

Résumé :

Braking system is one of the basic organs to control a car. For many years, the disc brakes have been used in automobiles for safe retardation of the vehicles. During braking, enormous amount of heat will be generated, and for effective braking, sufficient heat dissipation is essential. The specific air flow surrounding the brake rotor depends on the thermal performance of the disc brake and hence, the aerodynamics is an important in the region of brake components. A CFD analysis is carried out on the braking system as the study of this case, to make out the behaviour of air flow distribution

Styles APA, Harvard, Vancouver, ISO, etc.

25

Raja, Vijayanandh, Raj Kumar Gnanasekaran, Abdul Razak Kaladgi, Parvathy Rajendran, Sher Afghan Khan, and Mohammad Asif. "Multi-Disciplinary Computational Investigations on Asymmetrical Failure Factors of Disc Brakes for Various CFRP Materials: A Validated Approach." Symmetry 14, no. 8 (August 5, 2022): 1616. http://dx.doi.org/10.3390/sym14081616.

Texte intégral

Résumé :

Finite element analyses (FEA) are flexible and advanced approaches, which are utilized to address difficult problems of aerospace materials that exhibit both structural symmetrical and structural asymmetrical characteristics. Frictional behavior effects are used as a crucial element in this multidisciplinary study, and other structural, thermal properties are computed using FEA. Primary lightweight materials such as glass fiber reinforced polymer (GFRP), carbon fiber reinforced polymer (CFRP), kevlar fiber reinforced polymer (KFRP), titanium alloy, tungsten carbide, steel alloys, and advanced

Styles APA, Harvard, Vancouver, ISO, etc.

26

García-León, Ricardo A., and Eder Flórez-Solano. "Dynamic analysis of three autoventilated disc brakes." Ingeniería e Investigación 37, no. 3 (September 1, 2017): 102–14. http://dx.doi.org/10.15446/ing.investig.v37n3.63381.

Texte intégral

Résumé :

The braking system of a car must meet several requirements, among which safety is the most important. It is also composed of a set of mechanical parts such as springs, different types of materials (Metallic and Non Metallic), gases and liquids. The brakes must work safely and predictably in all circumstances, which means having a stable level of friction, in any condition of temperature, humidity and salinity of the environment. For a correct design and operation of brake discs, it is necessary to consider different aspects, such as geometry, type of material, mechanical strength, maximum temp

Styles APA, Harvard, Vancouver, ISO, etc.

27

Rievaj, Vladimír, Lenka Mokričková, and František Synák. "Temperature of the brakes and the Braking Force." Transport and Communications 5, no. 1 (2017): 13–16. http://dx.doi.org/10.26552/tac.c.2017.1.3.

Texte intégral

Résumé :

The kinetic energy of the braking vehicle is changed into heat and the resulting heat increases the temperature of each part of brakes. The changed temperature affects the coefficient of friction between the brake lining and brake drum of brake disc. Unless the brakes are actuated hydraulically there is the warning brake pads and brake fluid. Object of examination in this article is the impact of repetitive braking to change of these parameters and the impact of time to change the boiling point of the brake fluid.

Styles APA, Harvard, Vancouver, ISO, etc.

28

Joshi, Pranav, Sushovan Samantray, and S. Senthur Prabu. "Investigation on Thermal Stress Analysis of Brake Disc Using ANSYS Simulation." ECS Transactions 107, no. 1 (April 24, 2022): 10865–75. http://dx.doi.org/10.1149/10701.10865ecst.

Texte intégral

Résumé :

The brake system is a basic and one of the most important systems of an automobile vehicle. Brake rotors of disc brakes rotate with the wheels, and brake pads, which are fitted to the brake calipers, clamp on these rotors to stop or decelerate the wheels. They convert the vehicles kinetic energy into heat, vibration, and sound energies, so that the vehicle can be brought to a halt. This change in energy occurs between the brake pads and the rotors or disc in a disc brake system. In this study we focus on the high thermal stresses endured by the disc during this energy conversion. Due to these

Styles APA, Harvard, Vancouver, ISO, etc.

29

Li, Xiao Fei, Wen Bo Ni, and Xue Mei Wang. "Thermal Load Analysis of a Brake Disc for a 220t Mining Dump Truck." Advanced Materials Research 619 (December 2012): 188–94. http://dx.doi.org/10.4028/www.scientific.net/amr.619.188.

Texte intégral

Résumé :

Analyzing thermal load of friction pair of the disc brakes was not only an indispensable part but also a key theoretical basis for choosing materials of friction pair. In this paper, a brake disc of a mining dump truck with 220t loads was researched. In accordance with the brake test requirements of ISO3450-1996 standard, the finite element model was built using ANSYS software and then the transient simulation analysis of the temperature field for the brake disc was conducted. Finally the temperature distribution and its variation of the brake disc were analyzed in detail based on the simulati

Styles APA, Harvard, Vancouver, ISO, etc.

30

Degallaix, Gérard, Philippe Dufrénoy, Jonathan Wong, Paul Wicker, and Frédéric Bumbieler. "Failure Mechanisms of TGV Brake Discs." Key Engineering Materials 345-346 (August 2007): 697–700. http://dx.doi.org/10.4028/www.scientific.net/kem.345-346.697.

Texte intégral

Résumé :

The CRISFIS project (supported by ADEME agency) consists in jointly studying the squealing and cracking aspects of the high power disc brakes for TGV very high speed trains. This paper deals with the progress concerning the cracking part. An experimental and modelling strategy is adopted in order to better understand and predict brake disc cracking. Braking tests conducted on an industrial scale-one test bench are presented. In a first step, the influence of the pad-type on the thermal loading applied to the disc is studied by means of an infrared camera and thermocouples embedded in the pads

Styles APA, Harvard, Vancouver, ISO, etc.

31

Shiao, Yaojung, and Mahendra Babu Kantipudi. "High torque density magnetorheological brake with multipole dual disc construction." Smart Materials and Structures 31, no. 4 (March 11, 2022): 045022. http://dx.doi.org/10.1088/1361-665x/ac5860.

Texte intégral

Résumé :

Abstract This paper presents a magnetorheological (MR) brake with the intent of overcoming the problems of limited torque density and low manufacturability that conventional MR brakes come across. Firstly, the conceptual design of the proposed MR brake was finalized. High torque density was achieved by using the combined effect of the dual disc-type construction and multipole concept. High manufacturability was attained with a simple and lightweight mechanical construction. It was created with the major components, namely magnetically permeable stator cases, rotor discs, magnetic cores, windin

Styles APA, Harvard, Vancouver, ISO, etc.

32

Sudjadi, Usman. "Study about Surface Hardening on Local Disc Brakes with Direct Current Plasma Nitrocarburizing Apparatus." Advanced Materials Research 789 (September 2013): 383–86. http://dx.doi.org/10.4028/www.scientific.net/amr.789.383.

Texte intégral

Résumé :

Surface hardening on local disc brakes with DC-plasma nitrocarburizing apparatus has been carried out. Local disc brake was nitrocarburized at temperatures of 700 °C, 800°C, and 900°C for 3 hours, respectively. The results show that the hardness of sample of local disc brake before nitrocarburization was 167.86 Kgf/mm2, after the sample was nitrocarburized at temperature 900 °C for 3 hours, the hardness increased up to 649.38 Kgf/mm2. Matrixes on the base material were austenite, ferrite, and perlite.

Styles APA, Harvard, Vancouver, ISO, etc.

33

B, Aboli, Waghmode ., and Dr S. N. Khan. "Design, Analysis and Shape Optimization Disc Brake by Using Thermal Analysis and Practical Testing." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 1297–304. http://dx.doi.org/10.22214/ijraset.2022.45472.

Texte intégral

Résumé :

Abstract: The disc brake is a device for slowing or stopping the rotation of a wheel. Friction causes the disc and attached wheel to slow or stop. Brakes convert friction energy into heat energy and this heat will be transfer to the disc. By using disc heat is send to air. For sending heat to air disc having cut section and hole on surface to improve heat transfer. In this paper we work on to improve heat transfer to air by using shapes. We work on original disc brake and developed five new shape for analysis. When we do the thermal analysis we found that one disc having better result than ori

Styles APA, Harvard, Vancouver, ISO, etc.

34

Deng, Jin Lian, and Ying Ying Shan. "Simulation and Experimental Research of Disc Brake." Advanced Materials Research 472-475 (February 2012): 2251–55. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2251.

Texte intégral

Résumé :

Taking local-branded disc brakes for example, establishing the finite element model (FEM) of the assembly. Solving their stress and strain under work conditions, and the stress strain of its key components calipers and brackets is tested. The results showed that finite element analysis result of the caliper and bracket is consistent with experimental results, in line with engineering application, so finite element analysis process of brake assembly is feasible, finite element analysis for the brake industry to provide guidance.

Styles APA, Harvard, Vancouver, ISO, etc.

35

Newase, Srushti. "Thermal Analysis of Disc Brake System." International Journal for Research in Applied Science and Engineering Technology 9, no. 8 (August 31, 2021): 1819–26. http://dx.doi.org/10.22214/ijraset.2021.37662.

Texte intégral

Résumé :

Abstract: Brakes are one of the most significant safety systems in an automobile. In the braking process, the rotor will be exposed to large stresses which result in surface cracking, overheating of brake fluid, seals and other components. Therefore one of the main tasks of the braking system is to reduce the surface temperature of the brake rotor. This can be achieved by choosing the right material which will undergo the least thermal stresses. In this project, thermal analysis for vented disc brake rotor of Mahindra Bolero’s done, for providing an efficient material for disc brake rotor and

Styles APA, Harvard, Vancouver, ISO, etc.

36

Mackin, Thomas J., Steven C. Noe, K. J. Ball, B. C. Bedell, D. P. Bim-Merle, M. C. Bingaman, D. M. Bomleny, et al. "Thermal cracking in disc brakes." Engineering Failure Analysis 9, no. 1 (February 2002): 63–76. http://dx.doi.org/10.1016/s1350-6307(00)00037-6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

37

Gau, Wei Hsin, Kun Nan Chen, and Chin Yuan Hung. "Squeal and Thermal Analysis of Automobile Disc Brake Rotors." Applied Mechanics and Materials 764-765 (May 2015): 369–73. http://dx.doi.org/10.4028/www.scientific.net/amm.764-765.369.

Texte intégral

Résumé :

The brakes of an automobile are among the most critical components regarding the safety features, and disc brakes are the most common type used in passenger vehicles. In this research, the squeal phenomena of a swirl-vent brake rotor and the thermal analysis of two straight-vent brake rotors, made of cast-iron and aluminum-alloy, are investigated. For the squeal analysis, finite element models are created and analyzed using a prestressed modal analysis with complex eigen-solutions. For the thermal analysis, heat transfer coefficients on the surfaces of a rotor as functions of time are first es

Styles APA, Harvard, Vancouver, ISO, etc.

38

Lü, Hui, Wen-Bin Shangguan, and Dejie Yu. "A universal approach to squeal analysis of the disc brakes involving various types of uncertainty." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 232, no. 6 (June 28, 2017): 812–27. http://dx.doi.org/10.1177/0954407017709644.

Texte intégral

Résumé :

On the basis of fuzzy random variables, a universal approach to squeal analysis of the disc brakes involving various types of uncertainty is proposed in this paper. In the proposed approach, first, the brake stability analysis function related to reliability is constructed with fuzzy random variables. Next, the fuzziness represented by fuzzy random variables is decomposed into interval uncertainties by using a level-cut strategy. Then, the expectations and the variances of the brake stability analysis function are approximately solved by the random moment method at different cut levels, and th

Styles APA, Harvard, Vancouver, ISO, etc.

39

Shinde, Dinesh, Mukesh Bulsara, and K. N. Mistry. "Tribological performance of non-asbestos brake friction material in contact with brake disc of varying topography." Industrial Lubrication and Tribology 72, no. 10 (July 4, 2020): 1277–83. http://dx.doi.org/10.1108/ilt-04-2020-0120.

Texte intégral

Résumé :

Purpose The purpose of this paper is to evaluate experimentally the influence of different surface roughness of the contacting disc on tribological performance of the non-asbestos brake friction material (BFM). Design/methodology/approach Taguchi method was applied to design an experiment using three different discs of gray cast iron with different surface roughness, which is measured using optical profilometer. These discs were subjected to sliding against pins prepared with the developed non-asbestos BFM, using pin on disc friction and wear monitor. Findings The experimental results shows th

Styles APA, Harvard, Vancouver, ISO, etc.

40

Mat Lazim, Ahmad Razimi, Mohd Kameil Abdul Hamid, and Abd Rahim Abu Bakar. "Effects of Pad Surface Topography on Disc Brake Squeal." Applied Mechanics and Materials 165 (April 2012): 58–62. http://dx.doi.org/10.4028/www.scientific.net/amm.165.58.

Texte intégral

Résumé :

Brake squeal has always been a major NVH problem to many car makers due to significant number of warranty claims. Brake squeal is a high frequency noise (above 1 kHz) emanating from car disc brakes that get excited due to one or more mechanisms such as mode coupling, stick-slip, hammering and sprag-slip. This paper attempts to investigate the effects of brake pad surface topography on squeal generation. Two pairs of a non-asbestos organic (NAO) brake pad will be tested on a brake dynamometer test rig. Surface topography of the brake pad will be analyzed through microscopic techniques using ene

Styles APA, Harvard, Vancouver, ISO, etc.

41

Niemann, Hartmut, Hermann Winner, Christof Asbach, Heinz Kaminski, Georg Frentz, and Roman Milczarek. "Influence of Disc Temperature on Ultrafine, Fine, and Coarse Particle Emissions of Passenger Car Disc Brakes with Organic and Inorganic Pad Binder Materials." Atmosphere 11, no. 10 (October 5, 2020): 1060. http://dx.doi.org/10.3390/atmos11101060.

Texte intégral

Résumé :

Passenger car disc brakes are a source of ultrafine, fine, and coarse particles. It is estimated that 21% of total traffic-related PM10 emissions in urban environments originate from airborne brake wear particles. Particle number emission factors are in the magnitude of 1010 km−1 wheel brake during real-world driving conditions. Due to the complexity of the tribological processes and the limited observability of the friction zone between brake disc and pad, the phenomena causing particle emission of disc brakes are only partially understood. To generate a basis for understanding the emission p

Styles APA, Harvard, Vancouver, ISO, etc.

42

SHARIFULLIN, I. A., A. L. NOSKO, E. V. SAFRONOV, and D. V. KIRILLOV. "RESEARCH OF THE OPERATION OF MAGNETIC BRAKE ROLLERS OF GRAVITY ROLLER CONVEYORS." Fundamental and Applied Problems of Engineering and Technology, no. 4 (2021): 134–43. http://dx.doi.org/10.33979/2073-7408-2021-348-4-134-143.

Texte intégral

Résumé :

One of the main elements of safe operation of gravity conveyors used in gravity racks for pallets is the brake roller. The most promising design is a brake roller of magnetic (eddy current) type. A mathematical model of the process of moving pallets on a magnetic brake roller is developed. The equation of the speed of movement of the pallets on the brake magnetic roller obtained. The main parameter that determines the braking functions of the brake magnetic roller, and therefore the speed of movement of the pallet on the gravity roller conveyor is the coefficient of magnetic viscosity. A compa

Styles APA, Harvard, Vancouver, ISO, etc.

43

Sokolski, Piotr, and Justyna Sokolska. "ASSESSMENT OF THE INFLUENCE OF THE COEFFICIENT OF FRICTION ON THE TEMPERATURE DISTRIBUTION OF A DISC BRAKE DURING THE BRAKING PROCESS." Tribologia 288, no. 6 (December 31, 2019): 95–99. http://dx.doi.org/10.5604/01.3001.0013.7774.

Texte intégral

Résumé :

Brake assemblies are key mechanisms in the aspect of safe and reliable operation of devices and machines. Due to intense thermal processes that occur during braking, the brakes are exposed to an accelerated wear. The article assesses the impact of tribological cooperation conditions between the caliper and the disc of a disc brake on the temperature of a disc. The variable value in the simulations was the coefficient of friction between the cooperating surfaces. A direct effect of the increase of the analysed parameter on the enhancement of brake elements’ temperature was found. At the same ti

Styles APA, Harvard, Vancouver, ISO, etc.

44

Yeom, Yun-Taek, Min-Soo Kim, Hak-Joon Kim, Sung-Jin Song, Ho-Yong Lee, Sung-Duk Kwon, Sung-Sik Kang, and Deok-Yong Sung. "A Study on Depth Sizing for Surface Cracks in KTX Brake Disc Using Rayleigh Wave." Advances in Materials Science and Engineering 2019 (April 8, 2019): 1–15. http://dx.doi.org/10.1155/2019/6041709.

Texte intégral

Résumé :

Korea Train eXpress (KTX), high-speed railway system, provides an important platform for public transportation and connects major metropolitans in Korea. KTX aiming towards next-generation transportation system has plans to increase the operation times. However, with increasing operation times, safety and reliability of the railways especially inspection of brakes systems becomes important. Therefore, in this study, a KTX brake disc inspection system using the Rayleigh wave is developed to characterize the cracks in the discs. The performance of the inspection system is evaluated on the KTX br

Styles APA, Harvard, Vancouver, ISO, etc.

45

Krivosheya, Yuriy Vladimirovich, and Tatyana Leonidovna Ripol-Saragosi. "Construct and energy reserves improvement of exploitative properties rail friction brake." Transport of the Urals, no. 2 (2020): 26–30. http://dx.doi.org/10.20291/1815-9400-2020-2-26-30.

Texte intégral

Résumé :

The paper gives an assessment of the design and energy reserves for improving the operational properties of the railway friction brake under the existing mass-dimensional restrictions and the growth of braking energy. The criterion for assessing the operational properties of the friction brake is the friction coefficient and contact energy load. The results of experimental studies of the relationship between the frictional characteristics of the disc brake and the affecting structural and loadspeed factors are presented. Design options for railway friction brakes are proposed that provide impr

Styles APA, Harvard, Vancouver, ISO, etc.

46

Olshevskiy, Alexander, Alexey Olshevskiy, Oleg Berdnikov, and Chang-Wan Kim. "Finite element analysis of railway disc brake considering structural, thermal, and wear phenomena." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226, no. 7 (November 15, 2011): 1845–60. http://dx.doi.org/10.1177/0954406211428705.

Texte intégral

Résumé :

The purpose of this research is to identify the thermomechanical factors to be considered in simulation of the braking process, calculation of the distribution of the contact pressure, and temperature and obtain wear patterns for the disc brake system in operation. The factors affecting the temperature distribution and stress–strain state of disc brakes in railway vehicles are analyzed. The mutual influence of the thermal problem and contact problem was considered. The results of the numerical simulations for the finite element models can be used in optimizing the disc brake design in order to

Styles APA, Harvard, Vancouver, ISO, etc.

47

Gradin, Katja Tasala, and Anna Hedlund Åström. "Comparative life cycle assessment of car disc brake systems—case study results and method discussion about comparative LCAs." International Journal of Life Cycle Assessment 25, no. 2 (November 4, 2019): 350–62. http://dx.doi.org/10.1007/s11367-019-01704-9.

Texte intégral

Résumé :

Abstract Purpose Two life cycle assessment (LCA) studies comparing a new low-particulate-matter-emission disc brake and a reference disc brake were presented. The purpose was to identify the difference in potential environmental impacts due to a material change in the new disc brake parts. Additionally, the validity was investigated for the simplification method of omitting identical parts in comparative LCA. This was done by comparing the results between the simplified and the full LCA model. Methods The two disc brakes, new disc brake and reference disc brake, were assessed according to the

Styles APA, Harvard, Vancouver, ISO, etc.

48

García-León, Ricardo Andres, Wilder Quintero-Quintero, and Magda Rodriguez-Castilla. "Thermal analysis of three motorcycle disc brakes." Smart and Sustainable Built Environment 9, no. 2 (November 20, 2019): 208–26. http://dx.doi.org/10.1108/sasbe-07-2019-0098.

Texte intégral

Résumé :

Purpose The braking system on motorcycles is of vital importance, taking into account that its operation is based on the friction between the surfaces in the contact that are found heat and, therefore, the brake liquid, the thermoelastic deformation on the contact surface, the degradation and failure of the material, as can be attributed to the safety of the occupants. The purpose of this paper is to perform mathematical calculations regarding the phenomena of the transfer of heat generated in the brake system. Design/methodology/approach Using SolidWorks simulation software, the geometric mod

Styles APA, Harvard, Vancouver, ISO, etc.

49

A.Pavan Kumar and Dr.D Venkata Rao, Shaik Chand Mabhu Subhani. "Structural and Thermal Analysis of Brake Drum." International Journal for Modern Trends in Science and Technology 6, no. 12 (December 3, 2020): 8–15. http://dx.doi.org/10.46501/ijmtst061202.

Texte intégral

Résumé :

The brake drum is a specialized brake that uses the concept of friction to decelerate or to stop the vehicle. The deceleration is achieved by the assistance of the friction generated by a set of brake shoes or pads. During the brake operation heat is ejected out this causes damage to the brake. Disc (Rotor) brakes are exposed to large thermal stresses during routine braking and extraordinary thermal stresses during hard braking. To satisfy this condition the drum material should possess a high thermal conductivity, thermal capacity and high strength .The common material used for construction o

Styles APA, Harvard, Vancouver, ISO, etc.

50

Belhocien, Ali, and Wan Zaidi Wan Omar. "CFD Modeling and Simulation of Aeorodynamic Cooling of Automotive Brake Rotor." Journal of Multiscale Modelling 09, no. 01 (March 2018): 1750008. http://dx.doi.org/10.1142/s1756973717500081.

Texte intégral

Résumé :

Braking system is one of the important control systems of an automotive. For many years, the disc brakes have been used in automobiles for the safe retarding of the vehicles. During the braking enormous amount of heat will be generated and for effective braking sufficient heat dissipation is essential. The thermal performance of disc brake depends upon the characteristics of the airflow around the brake rotor and hence the aerodynamics is an important in the region of brake components. A CFD analysis is carried out on the braking system as a case study to make out the behavior of airflow distr

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!