Se connecter

Bibliographies thématiques / Grinding / Thèses

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Grinding.

Thèses sur le sujet « Grinding »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 25 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Grinding ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.

1

Agahi, Maryam. "Grinding polycrystalline diamond using a diamond grinding wheel." Access electronically, 2006. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20061114.150854/index.html.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Brown, Austin (Austin R. ). "Axially force limited grinding spindle for robotic grinding." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119966.

Texte intégral

Résumé :

Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 35).<br>Grinding and Polishing of small parts is often easily performed by human hands, yet is challenging to automate. The grinding and polishing process is best done using a force-control scheme, which human hands perform naturally. Heavy robotic arms, which favor a position-control scheme, are difficult to control precisely, and trajectory errors can cause excessive grinding force which leads to burning of the

Styles APA, Harvard, Vancouver, ISO, etc.

3

Curtis, David Thomas. "Point grinding and electrolytic point grinding of Udimet 720." Thesis, University of Birmingham, 2011. http://etheses.bham.ac.uk//id/eprint/2850/.

Texte intégral

Résumé :

The work within this Thesis is concerned with the manufacturing processes associated with the production of blade root mounting slots in aeroengine compressor and turbine discs. Typically slots are of dovetail or fir-tree geometry dependent on specific design requirements. The state of the art process across the industry is broaching however, despite achieving required geometrical tolerances and surface integrity for decades the process is not without its disadvantages. Primarily these include the inflexibility of the process, machine tool cost; size and cutting forces, complexity of tooling a

Styles APA, Harvard, Vancouver, ISO, etc.

4

Liu, Qiang. "Pattern recognition of grinding defects and assessment strategies of grinding." Thesis, University of Nottingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.417403.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Gannholm, Sören. "The mysterious grinding grooves." Thesis, Uppsala universitet, Institutionen för arkeologi och antik historia, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-423569.

Texte intégral

Résumé :

On the Island of Gotland, there is a phenomenon called grinding grooves, Sw. slipskåror. They occur in bedrock and boulders. About 3600 are known on the island today and having a length of less than half a meter to over one meter. Their purpose was unknown to the scientific community as well as their age. The directions of some 1250 Gotlandic grinding grooves, measured by the author shows there is a correlation to astronomical orientations. An archaeological excavation carried out by the author at a stone with grinding grooves gave some crucial results. The grinding groove phenomenon occurs in

Styles APA, Harvard, Vancouver, ISO, etc.

6

Yin, Guoxu. "Theoretical-Experimental Study of Fluid Delivery and Heat Management in Grinding." University of Toledo / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1438598110.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Hekman, Keith Alan. "Precision control in compliant grinding via depth-of-cut manipulation." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/16627.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Alabed, Asmaa. "Knowledge management for grinding technology." Thesis, University of Huddersfield, 2011. http://eprints.hud.ac.uk/id/eprint/14575/.

Texte intégral

Résumé :

This thesis describes an investigation concerned with development of a grinding knowledge warehouse system (GKWS). Based on a study of previous work on knowledge management and technique for a selection of grinding conditions, the thesis proposes a novel methodology to deal with missing data in surface and cylindrical grinding using Genetic Programming. The GKWS provides a guided tool for users to support the decision-making process to provide suggestions for selecting grinding conditions using rule-based reasoning (RBR) and case-based reasoning (CBR) and it can learn from new and previous gri

Styles APA, Harvard, Vancouver, ISO, etc.

9

Massam, Mark. "Thermal characteristics of grinding fluids." Thesis, Cranfield University, 2008. http://dspace.lib.cranfield.ac.uk/handle/1826/7615.

Texte intégral

Résumé :

High Efficiency Deep Grinding (HEDG) combines high depths of cut, high grinding wheel speeds with high work piece feed rates to deliver a very high stock removal process that can produce components free of surface damage. High contact temperatures are a characteristic of the process and this produces a mass of hot grinding sparks being ejected from the grinding zone. Neat oil cutting fluids are typically used in HEDG due to their excellent lubricity, but the high grinding wheel speeds employed leads to high levels of highly volatile cutting fluid mist in the machine canopy. This mist can mix w

Styles APA, Harvard, Vancouver, ISO, etc.

10

Barlow, N. "High-rate grinding wheel design." Thesis, Liverpool John Moores University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380664.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Li, Yan. "Intelligent selection of grinding conditions." Thesis, Liverpool John Moores University, 1996. http://researchonline.ljmu.ac.uk/5130/.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

12

Ebbrell, Stephen. "Process requirements for precision grinding." Thesis, Liverpool John Moores University, 2003. http://researchonline.ljmu.ac.uk/5633/.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

13

Oghazi, Pejman. "Traceability in continuous grinding circuits /." Luleå : Division of Mineral Processing, Department of Chemical Engineering and Geosciences, Luleå University of Technology, 2008. http://epubl.ltu.se/1402-1757/2008/34/.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

Moeller, Gregory V. "Residual stresses due to grinding." Thesis, This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-05022009-040807/.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Cowan, Richard Watson. "An adaptive statistically based controller for through-feed centerless grinding." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/17570.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

16

Shao, Yamin. "Predictive modeling of residual stress in MQL grinding and surface characteristics in grinding of ceramics." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53865.

Texte intégral

Résumé :

Surface integrity is of great significance in grinding performance since grinding process is often used as a finishing step. For metallic materials, residual stresses play an important role in surface integrity for its strong effect on fatigue life, corrosion resistance, and part distortion. For ceramic materials, the surface damage induced by grinding process could greatly affect the mechanical strength and surface finish of the component. The functional behavior of machined components can be enhanced or impaired by the grinding process. Because of this, understanding the surface integrity im

Styles APA, Harvard, Vancouver, ISO, etc.

17

Pena-Diaz, Hernan R. "Experimental validation of an atomization model for fluids used in the grinding process." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/18999.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Hänel, Albrecht, Uwe Teicher, Holger Pätzold, Andreas Nestler, and Alexander Brosius. "Investigation of a carbon fibrereinforced plastic grinding wheel for high-speed plunge-cut centreless grinding application." Sage, 2018. https://tud.qucosa.de/id/qucosa%3A35379.

Texte intégral

Résumé :

High-speed plunge-cut centreless grinding opens up enormous potential for the manufacturing of difficult-to-machine materials and to improve the surface quality while reducing the grinding forces. For this investigation, a new grinding wheel base body of carbon fibre-reinforced plastic (CFRP) was developed to achieve grinding wheel speeds up to 150 m/s in plunge-cut centreless grinding of hardened shafts. For evaluation of the performance characteristics, the grinding forces and the surface quality of different grinding tools were detected. These experiments were conducted using a newly develo

Styles APA, Harvard, Vancouver, ISO, etc.

19

Bell, Andrew John. "Temperatures in high efficiency deep grinding." Thesis, Cranfield University, 2009. http://dspace.lib.cranfield.ac.uk/handle/1826/4422.

Texte intégral

Résumé :

This research considers the temperatures generated in the workpiece during profile and cylindrical traverse grinding in the High Efficiency Deep Grinding (HEDG) regime. The HEDG regime takes large depths of cut at high wheel and workpiece speeds to create a highly efficient material removal process. This aggressive processing generates high temperatures in the contact zone between the wheel and workpiece. However, the beneficial contact angle and the rapid removal of the heated wheel – workpiece contact zone results in low temperatures in the finished surface. Temperatures in the ground surfac

Styles APA, Harvard, Vancouver, ISO, etc.

20

McIvor, Robert E. (Robert Emmett). "Technoeconomic analysis of plant grinding operations." Thesis, McGill University, 1988. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=39209.

Texte intégral

Résumé :

This study presents methodology for technical and economic performance analysis of conventional grinding circuits supported by two industrial cases. A review of the strengths and weaknesses of Bond work index and population balance modelling approaches to plant circuit analysis discloses the need to refine work index determinations, and to establish a system of more meaningful ball mill circuit performance parameters.<br>The statistical reliability of carefully determined rod mill work index efficiency ratings is presented. Technical and economic performance improvements through rod mill speed

Styles APA, Harvard, Vancouver, ISO, etc.

21

Conway-Baker, Jamie. "Measurement and modelling of fine grinding." Thesis, University of Exeter, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.403075.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Baniszewski, Beth (Beth Ellen). "An environmental impact analysis of grinding." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/32880.

Texte intégral

Résumé :

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.<br>Includes bibliographical references (leaves 39-40).<br>This thesis was intended to investigate the environmental impact of grinding in the United States manufacturing industry. Grinding is an ideal method for producing parts with a fine surface finish and high dimensional accuracy and for shaping hard or brittle workpieces. There are a wide variety of different types of grinding machines, each with different applications and slightly different energy requirements. Workpieces are generally flooded wi

Styles APA, Harvard, Vancouver, ISO, etc.

23

Hyde, Paul. "Numerical techniques for optimising rail grinding." Thesis, University of Newcastle upon Tyne, 2012. http://hdl.handle.net/10443/1468.

Texte intégral

Résumé :

Grinding of rails is a technique widely used within the railway industry to balance the degradation of the condition of the rail with the required performance of the rail. The principal focus of this research is the impact of wear and rolling contact fatigue (RCF) cracks on structural integrity of rails, and how rail grinding affects this relationship. A numerical model which predicts growth of RCF-initiated cracks in rails has been adapted to take into account periodic grinding of the surface of the rail. The suitability of some of the simplifying assumptions of the adapted model, referred to

Styles APA, Harvard, Vancouver, ISO, etc.

24

Коротун, Микола Миколайович, Николай Николаевич Коротун, Mykola Mykolaiovych Korotun, Я. В. Сорока, and Y. V. Soroka. "Measuring and control devices grinding machine." Thesis, Вид-во СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/5580.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

25

Broseghini, Marica. "Modelling of high-energy grinding processes." Doctoral thesis, Università degli studi di Trento, 2017. https://hdl.handle.net/11572/368897.

Texte intégral

Résumé :

The comminution and tuning of several structural parameters of materials is often accomplished following a top-down route by high energy grinding. The reduced size of the particles constituting the end product and the incorporation of defects cause modified materials properties and increased solid-state chemical reactivity. Among grinding devices, the planetary ball mill features high efficiency and versatility, being suitable for almost any kind of material, from metals and ceramics to organic compounds and pharmaceuticals. While its design and the working principle are rather simple, since g

Styles APA, Harvard, Vancouver, ISO, etc.

26

Broseghini, Marica. "Modelling of high-energy grinding processes." Doctoral thesis, University of Trento, 2017. http://eprints-phd.biblio.unitn.it/2749/1/thesis.pdf.

Texte intégral

Résumé :

The comminution and tuning of several structural parameters of materials is often accomplished following a top-down route by high energy grinding. The reduced size of the particles constituting the end product and the incorporation of defects cause modified materials properties and increased solid-state chemical reactivity. Among grinding devices, the planetary ball mill features high efficiency and versatility, being suitable for almost any kind of material, from metals and ceramics to organic compounds and pharmaceuticals. While its design and the working principle are rather simple, since

Styles APA, Harvard, Vancouver, ISO, etc.

27

Karinkanta, P. (Pasi). "Dry fine grinding of Norway spruce (Picea abies) wood in impact-based fine grinding mills." Doctoral thesis, Oulun yliopisto, 2015. http://urn.fi/urn:isbn:9789526207193.

Texte intégral

Résumé :

Abstract Wood powders are used in numerous applications such as thermoplastics and filters, and a lot of research effort has been put into developing novel ways of utilising them. The mechanical processing of wood powders, especially at particle sizes below 100 µm, has been reported in several studies, but they lack information on the effect of fine grinding conditions on the particle morphology and cellulose crystallinity, both of which are important parameters in the further processing of wood powders and in their various applications. This makes it very difficult to design and optimise fine

Styles APA, Harvard, Vancouver, ISO, etc.

28

Yesilay, Yasemin Ayse. "A Computer Simulator For Ball Mill Grinding." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/2/12605350/index.pdf.

Texte intégral

Résumé :

Ball mill grinding is an important operation in the processing of most minerals, in that it may be used to produce particles of the required size and shape, to liberate minerals from each other for concentration purposes, and to increase the powder surface area. Grinding of minerals is probably the most energy consuming task and optimization of this operation has vital importance in processing plant operations to achieve the lowest operating costs. Predicting the complete product size distribution, mill specifications and power draw are important parameters of this optimization. In this study

Styles APA, Harvard, Vancouver, ISO, etc.

29

Onwuka, Goodness Raluchukwu. "Ultra-high precision grinding of BK7 glass." Thesis, Nelson Mandela Metropolitan University, 2016. http://hdl.handle.net/10948/5203.

Texte intégral

Résumé :

With the increase in the application of ultra-precision manufactured parts and the absence of much participation of researchers in ultra-high precision grinding of optical glasses which has a high rate of demand in the industries, it becomes imperative to garner a full understanding of the production of these precision optics using the above-listed technology. Single point inclined axes grinding configuration and Box-Behnken experimental design was developed and applied to the ultra-high precision grinding of BK7 glass. A high sampling acoustic emission monitoring system was implemented to mon

Styles APA, Harvard, Vancouver, ISO, etc.

30

Johnstone, Iain. "Critical study of high efficiency deep grinding." Thesis, Cranfield University, 2002. http://dspace.lib.cranfield.ac.uk/handle/1826/3586.

Texte intégral

Résumé :

The recent years, the aerospace industry in particular has embraced and actively pursued the development of stronger high performance materials, namely nickel based superalloys and hardwearing steels. This has resulted in a need for a more efficient method of machining, and this need was answered with the advent of High Efficiency Deep Grinding (HEDG). This relatively new process using Cubic Boron Nitride (CBN) electroplated grinding wheels has been investigated through experimental and theoretical means applied to two widely used materials, M50 bearing steel and IN718 nickel based superalloy.

Styles APA, Harvard, Vancouver, ISO, etc.

31

Farzanegan, Akbar. "Knowledge-based optimization of mineral grinding circuits." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0027/NQ50158.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

32

Hecker, Rogelio Lorenzo. "Power feedback control in cylindrical grinding process." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/16619.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

33

Johnson, S. P. "An investigation into below centre centreless grinding." Thesis, Coventry University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234797.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Chen, Chien-Hung. "Grinding sludge oil recovery transportation system development." Thesis, University of Canterbury. Mechanical Engineering, 2003. http://hdl.handle.net/10092/6605.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

Orton, P. A. "Instrumentation and control for precision grinding machines." Thesis, Nottingham Trent University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278450.

Texte intégral

Résumé :

This thesis examines the present methods of centre less bearing grinding, with a view to applying IIDderncontrol nethods in order to reduce the distribution of output size variations and improve the quality of surface finish. Established rrodels of the grinding process shew that various inportant parameters describing the process can be derived, providing that the grinding power can be accurately rronitored. Several alternative control strategies based on paNer rronitoring are considered. The drive systems of a typical grinding machine are rrodelled as they react through the non-linear grindin

Styles APA, Harvard, Vancouver, ISO, etc.

36

Lacey, S. J. "Condition monitoring of the centreless grinding process." Thesis, Nottingham Trent University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355322.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

37

Chen, Yinnan. "A generic intelligent control system for grinding." Thesis, Liverpool John Moores University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.388528.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Limchimchol, Thitikorn. "Web-based intelligent grinding condition monitoring system." Thesis, University of Nottingham, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.442268.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

39

Avril, Nicolas Joseph. "Manufacturing glass-fiber reinforcement for grinding wheels." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/38432.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Brown, Matthew Lasché. "Intelligent robot grinding : planning, optimization, and control." Thesis, Massachusetts Institute of Technology, 1988. http://hdl.handle.net/1721.1/14552.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

41

Jing-Kai, Nien, and 粘景凱. "Research of Worm Gear Grinding and Grinding Control." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/sv9z7y.

Texte intégral

Résumé :

碩士<br>逢甲大學<br>自動控制工程學系<br>102<br>Abstract The gear grinding process is the finishing process after heat treatment of the gear. At present, the industrial circle mostly use the worm generating gear grinding for mass production of gear grinding process. The worm generating gear grinding machine used by industries in Taiwan was imported from abroad, and the cost of controller is often considered to account for 30% to 50% of the machine. In this article, first we establish the theoretical involute worm mathematical formulas and then describe the spatial relationship between worm and gear by coordi

Styles APA, Harvard, Vancouver, ISO, etc.

42

Chen, Hong-Rong, and 陳鴻榮. "The Discussion of Grinding Energy on Grinding Surface Quality." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/03145439991255620352.

Texte intégral

Résumé :

碩士<br>國立高雄第一科技大學<br>機械與自動化工程所<br>90<br>Grinding process in one of the common method for precision machining of metals, which is typically applied to the demanded. However, the surface quality of grinding component can’t be realized until it is measured. In order to confirm the tendency and the possible surface characteristic of the grind component, it would seems necessary to monitor the grinding process to instantaneously realize the surface quality. A grinding energy hypothesis for surface quality monitory was proposed in this research. For on-line observation of workpiece quality, two quali

Styles APA, Harvard, Vancouver, ISO, etc.

43

Lin, Chia-Yen, and 林嘉彥. "Three Dimensional Grinding Force Measurement in Mold Grinding Processes." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/79040456950840753604.

Texte intégral

Résumé :

碩士<br>淡江大學<br>機械工程學系<br>87<br>In this thesis, a strain gage dynamometer is designed and manufactured to measure three dimensional grinding forces during grinding processes. With a resolution of 0.0096Nt in all 3 directions, this dynamometer is able to measure 2 tangential grinding forces in the range 0.0096 to 200Nt, and the normal grinding force in the range 0.0096 to 250 Nt. The dynamometer is composed of 4 measuring blocks to which strain gages are attached. Measuring blocks are designed so that, upon application of forces, they deform in a way that forces in the x, y, and z directions can

Styles APA, Harvard, Vancouver, ISO, etc.

44

Huang, Guozhi. "Modelling of sulphide minerals: grinding media electrochemical interaction during grinding." 2005. http://arrow.unisa.edu.au:8081/1959.8/28362.

Texte intégral

Résumé :

In this study the unique Magotteaux Mill® system was used to control the grinding chemical conditions, which may be adjusted by varying grinding media, purging gas and pH, during grinding. An electrochemical apparatus was used to investigate oxidation-reduction behaviour of grinding media and sulphide mineral electrodes, as well as their galvanic interaction in-situ of the Magotteaux Mill®. Galvanic interaction between the grinding media (mild steel, 15% chromium, 21% chromium and 30% chromium media) and the sulphide minerals (bornite, arsenopyrite and pyrite) was initially quantified in-situ

Styles APA, Harvard, Vancouver, ISO, etc.

45

XIAO, YONG-PING, and 蕭永平. "Studies on Characteristics of surface grinding with conical grinding wheels." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/25600910794839203450.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

46

Chen, Alan, and 陳建元. "Grinding Characteristics of Resin CBN Grinding Wheels for SKD11 Steel." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/56785481074219846320.

Texte intégral

Résumé :

碩士<br>國立勤益科技大學<br>機械工程系<br>102<br>The purpose of this study is design a new sand stick to decrease compounding recipe times. We all know, Wheel structure of three elements is abrasives, binders and pores. Sand stick and wheel have same structure but different geometric shapes, so this paper manufacturing CBN resin sand stick from wheel process. Previous test wheel surface are often observed by the situation after grinding wheel surface, but this method can’t carefully observe the micro-structural variations in the abrasives and binders after grinding, so this paper design platform can carry ou

Styles APA, Harvard, Vancouver, ISO, etc.

47

Chen, Shen-Hang, and 陳聖航. "Studies on the Grinding Mechanism of New Ultra-Precision Ball Grinding Machine." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/38960765473220417585.

Texte intégral

Résumé :

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>92<br>The ceramic ball bearing has been used to exact machine for its good properties such as heat-resistant, corrosion-resisting, and wear-resisting. The old grinding methods of ball bearing spend much time and power. Although the magnetic fluid grinding method economizes time, but cost much money. This study research the effects of spindle speed, grit size, load, and the material of float-ring and fixed-ring on the grinding characteristics by using a new ultra-precision ball grinding machine which developed by our lab. Search the optimum operating conditions o

Styles APA, Harvard, Vancouver, ISO, etc.

48

Lin, Tzu-yu, and 林子毓. "Research of Grinding Behavior with CBN Ball Nose AbrasiveCutter by Grinding Fore." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/84251359106874109379.

Texte intégral

Résumé :

碩士<br>國立高雄第一科技大學<br>機械與自動化工程所<br>92<br>Abstract Due to high development of the mechanical technology, the needs of the precise components are being increased. Conventionally, most of the precision parts need multiple manufacturing processes; in accordance with the machining of curved surface, the work surface is usually generated using a milling operation to obtain the required geometry. A subsequent finishing operation, such as grinding or polishing, is performed if a better surface is required. Usually, this is done on a different machine tool. Extra set up time and additional non-pro

Styles APA, Harvard, Vancouver, ISO, etc.

49

Horng, Yeh Jenq, and 葉政宏. "Studies on the Grinding Characteristics of New Ultra-Precision Ball Grinding Machine." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/67419070273340804680.

Texte intégral

Résumé :

碩士<br>國立中山大學<br>機械工程學系<br>87<br>This study develops kinematic analysis of ball grinding process, to realize the skidding mechanism. The effects of grit size, load, and spindle speed on the grinding characteristics is investigated by using a new ultra-precision ball grinding machine to search the optimum operating conditions of this machine. For the Al2O3 ceramic ball made in Taiwan, experimental results show that the converge rate to a saturated value for the sphericity and the removal rate increase with increasing grit size, load, or spindle speed. The sphericity increases when g

Styles APA, Harvard, Vancouver, ISO, etc.

50

Tang, Ming. "Computer Aided Manufacturing for gear grinding process using Constant Grinding Force method." 1986. http://catalog.hathitrust.org/api/volumes/oclc/15493841.html.

Texte intégral

Résumé :

Thesis (M.S.)--University of Wisconsin--Madison, 1986.<br>Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 142-143).

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!