Se connecter

Bibliographies thématiques / Heat exchangers / Thèses

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Heat exchangers.

Thèses sur le sujet « Heat exchangers »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 25 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Heat exchangers ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.

1

Kennedy, Ian James. "Investigation of heat exchanger inclination in forced-draught air-cooled heat exchangers." Thesis, Queen's University Belfast, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.601789.

Texte intégral

Résumé :

In some industrial air-cooled heat exchangers, such as those in the generating set industry, the flow must turn through 90° after exiting the heat exchanger. In such arrangements, the plenum depths are typically very shallow. Furthermore., the axial fan often operates in the mixed-flow region of the fan characteristic, due to the restrictive nature of the system. These two factors lead to a reduction in the thermal performance of the system. The purpose of this study was to investigate the effect on thermal performance of inclining the heat exchanger relative to the axial fan. It was also impo

Styles APA, Harvard, Vancouver, ISO, etc.

2

Watkins, Rhodri Evan. "Variable Volume Heat Exchangers." Thesis, University of Bristol, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.521071.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Bartuli, Erik. "Optimization of Heat Transfer Surfaces of Heat Exchangers." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401602.

Texte intégral

Résumé :

Disertační práce je zaměřena na kovové a polymerní výměníky tepla. Hlavním předmětem zkoumání je optimalizace teplosměnných ploch za účelem zvýšení účinnosti výměníku tepla. Tyto cíle byly dosaženy experimentálně a numericky pomocí modelování v ANSYS. Na základě dosažených výsledků byla rozpracována technologie křížového navíjení polymerních výměníků z dutých vláken. Experimentální zařízení původně určené pro navíjení tlakových nádrží bylo modifikované pro automatizovanou výrobu polymerních výměníků z dutých vláken, ježto může být použita při jejich masové výrobě. Tato práce se také zabývala v

Styles APA, Harvard, Vancouver, ISO, etc.

4

Hensley, Joshua L. "Direct contact heat exchanger development." Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/6002.

Texte intégral

Résumé :

Thesis (Ph. D.)--University of Missouri-Columbia, 2007.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on March 13, 2008) Vita. Includes bibliographical references.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Keen, D. J. "Combined convection in heat exchangers." Thesis, University of Leeds, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.235252.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Henry, M. P. "Design methodology : Regenerative heat exchangers." Thesis, University of York, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379493.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Li, Ming. "An experimental and theoretical study of fluidelastic instability in cross flow multi-span heat exchanger tube arrays /." *McMaster only, 1997.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Van, Aken G. J. "Transient modelling of finned tube heat exchangers /." Title page, contents, abstract and summary only, 1993. http://web4.library.adelaide.edu.au/theses/09ENS/09ensv217.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Boulares, Jihed. "Numerical and experimental study of the performance of a drop-shaped pin fin heat exchanger." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Jun%5FBoulares.pdf.

Texte intégral

Résumé :

Thesis (Mechanical Engineer and M.S. in Mechanical Engineering)--Naval Postgraduate School, June 2003.<br>Thesis advisor(s): Ashok Gopinath. Includes bibliographical references (p. 73-74). Also available online.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Adams, Juan Carlos. "Advanced heat transfer surfaces for gas turbine heat exchangers." Thesis, University of Oxford, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.534221.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Nguyen, Clayton Ma. "Heat transfer coefficients of particulate in tubular heat exchangers." Thesis, Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53960.

Texte intégral

Résumé :

This experimental study explores the heat transfer from heated bare and finned tubular surfaces to particulates in packed bed cross flow. The results from this experiment will be used to help select the type of particulates that will be used. Additionally, these results will assist in estimating heat transfer in prototype and commercial particle to fluid heat exchangers (PFHX). This research is part of larger effort in the use of particulates in concentrating solar power technology. These solid particles are heated by concentrated sunlight to very high temperatures at which they are a suitable

Styles APA, Harvard, Vancouver, ISO, etc.

12

Soler, Fossas Joan. "Modelling of Multistream LNG Heat Exchangers." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-14328.

Texte intégral

Résumé :

The main goal of this thesis is to find out if a liquefied natural gas multistream heat exchanger numerical model is achievable. This should include several features usually neglected in nowadays available heat exchanger models, such as flow maldistribution, changes in fluid properties and heat exchanger dynamic behaviour. In order to accomplish that objective a simpler case is modelled. Efforts are put in achieving numerical stability.A counter flow natural gas and mixed refrigerant heat exchanger is modelled. Some important characteristics of the obtained model are: (1) it allows a dynamic s

Styles APA, Harvard, Vancouver, ISO, etc.

13

Marhoon, Fatema Salman. "Heat Exchangers Used in Refrigeration Circuits." Thesis, University of Manchester, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.502999.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

Douch, Nicholas. "Air side fouling of heat exchangers." Thesis, University of Brighton, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.397850.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Lawton, Steven. "Flow maldistribution in compact heat exchangers." Thesis, University of Leeds, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.443517.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

16

COSTA, CARLOS EDUARDO SANTOS MOREIRA DA. "COSTS AND IRREVERSIBILITY IN HEAT EXCHANGERS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1986. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=20517@1.

Texte intégral

Résumé :

COMISSÃO NACIONAL DE ENERGIA NUCLEAR<br>Da segunda lei da termodinâmica, os conceitos de disponibilidade e irreversibilidade são aplicados à trocadores de calor. Equações relacionando a irreversibilidade com a efetividade de trocador de calor são desenvolvidas e aplicadas à vários casos. Relações entre o decréscimo de irreversibilidade e custos operacionais são também estabelecidos. Embora seja comumente dito que o trocador de calor em contra-correntes é menos irreversível que o trocador de calor em correntes paralelas, o presente trabalho mostra que isto não é sempre verdadeiro. Um critério m

Styles APA, Harvard, Vancouver, ISO, etc.

17

Huzayyin, Omar A. "Computational Modeling of Convective Heat Transfer in Compact and Enhanced Heat Exchangers." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1313754781.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Forinash, David Michael. "Novel air-coupled heat exchangers for waste heat-driven absorption heat pumps." Thesis, Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53897.

Texte intégral

Résumé :

A detailed investigation of novel air-coupled absorbers for use in a diesel engine exhaust-driven ammonia-water absorption system operating in extreme ambient conditions was conducted. Electrically driven vapor-compression systems are under scrutiny due to the environmental impact of synthetic refrigerants and the exacerbation of electric utility loads during peak demand periods. One alternative to vapor-compression systems is the absorption heat pump that uses environmentally benign working fluids and can be driven by a variety of heat sources, including waste heat and solar thermal processes

Styles APA, Harvard, Vancouver, ISO, etc.

19

Arsenyeva, O. P. "The hydraulic resistance in the small-scale pillow-plate heat exchangers." Thesis, Національний університет "Львівська політехніка", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48523.

Texte intégral

Résumé :

The Pillow-Plate Heat Exchangers (PPHEs) are rated as innovative type of heat transfer equipment. The present paper gives the information about the research made in Paderborn University aimed to investigate the heat transfer and pressure drop in the channels of the small-scale PPHE.

Styles APA, Harvard, Vancouver, ISO, etc.

20

Al-Hindi, Mahmoud. "Operating strategies for heat exchangers and networks of heat exchangers subject to fouling and variable inlet conditions." Thesis, Imperial College London, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321935.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Wu, Siu-kin. "Corrosion and fouling in heat exchangers cooled by sea water from Hong Kong harbour /." Hong Kong : University of Hong Kong, 1987. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12335472.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Da, Riva Enrico. "Two-phase Heat Transfer in Minichannel Heat Exchangers: Heat Pump Applications, Design, Modelling." Doctoral thesis, Università degli studi di Padova, 2009. http://hdl.handle.net/11577/3426130.

Texte intégral

Résumé :

Refrigerant charge minimization is one of the most important targets for heating and air conditioning applications when using natural refrigerants like hydrocarbons or ammonia to cope with the new environmental challenges. Some applications of minichannels for charge minimization in heat pumps are presented and discussed in this thesis. The design of an innovative condenser, an evaporator and an internal heat exchanger is presented. These devices are shell-and-tube heat exchangers using 2 mm i.d. minichannels and realized for the use with propane. Computational procedures based on empirical

Styles APA, Harvard, Vancouver, ISO, etc.

23

Acuña, José. "Improvements of U-pipe Borehole Heat Exchangers." Licentiate thesis, KTH, Applied Thermodynamics and Refrigeration, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-12749.

Texte intégral

Résumé :

<p>The sales of Ground Source Heat Pumps in Sweden and many other countries are having a rapid growth in the last decade. Today, there are approximately 360 000 systems installed in Sweden, with a growing rate of about 30 000 installations per year. The most common way to exchange heat with the bedrock in ground source heat pump applications is circulating a secondary fluid through a Borehole Heat Exchanger (BHE), a closed loop in a vertical borehole. The fluid transports the heat from the ground to a certain heating and/or cooling application. A fluid with one degree higher or lower temperatu

Styles APA, Harvard, Vancouver, ISO, etc.

24

Maltson, John D. "The performance of rippled fin heat exchangers." Thesis, Coventry University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.276096.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

25

Erol, Selcuk. "Near Field Investigation of Borehole Heat Exchangers." Doctoral thesis, Universite Libre de Bruxelles, 2015. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/221739.

Texte intégral

Résumé :

As an alternative and renewable energy source, the shallow geothermal energy evolving as one of the most popular energy source due to its easy accessibility and availability worldwide, and the ground source heat pump (GSHP) systems are the most frequent applications for extracting the energy from the shallow subsurface. As the heat extraction capacity of the GSHP system applications arises, the design of the borehole heat exchangers (BHE), which is the connected part of the system in the ground, become more important. The backfilling materials of BHEs, particularly, the grout material must pro

Styles APA, Harvard, Vancouver, ISO, etc.

26

Tsopanos, Sozon. "Micro Heat Exchangers by Selective Laser Melting." Thesis, University of Liverpool, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.507633.

Texte intégral

Résumé :

Selective Laser Melting (SLM), a layer-based Solid Freeform Fabrication (SFF) process, was used to fabricate micro cross-flow heat exchangers from 316L stainless steel, bronze (Cu 90%, Sn 10%) and Inconel 718 powder. Their mechanical and thermal properties were determined using solid blocks of SLM material prior to the fabrication of the micro cross flow heat exchangers. Initially the process parameters for the fabrication of high density (>97%) parts for the different materials were defined. The mechanical and thermal properties of SLM parts were then measured. The tensile test results exhibi

Styles APA, Harvard, Vancouver, ISO, etc.

27

Rae, George J. "Flow induced acoustic resonances in heat exchangers." Thesis, Robert Gordon University, 1986. http://hdl.handle.net/10059/608.

Texte intégral

Résumé :

This thesis describes an investigation into the acoustic phenomenon in in-line tubular heat exchangers subjected to cross flow. The flow through such a heat exchanger can result in the production of very high noise levels, which occur as a result of the excitation of an acoustic standing wave in the cavity between the tube rows. This acoustic vibration can occur in large and small heat exchangers alike, resulting in drastically impared performance and working life. The phenomenon associated with such vibration is poorly understood and considerable anomalies still exist in published literature.

Styles APA, Harvard, Vancouver, ISO, etc.

28

Evans, David John. "Non-linear modelling of regenerative heat exchangers." Thesis, University of York, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338556.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

29

Murray, James Mason. "Fine tube technology for advanced heat exchangers." Thesis, University of Bristol, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299326.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

30

Gotham, Simon Martyn. "Mechanisms of protein fouling of heat exchangers." Thesis, University of Cambridge, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357741.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

31

Makhema, Thabo. "Performance evaluation of air-cooled heat exchangers." Thesis, Stellenbosch : Stellenbosch University, 2000. http://hdl.handle.net/10019.1/51872.

Texte intégral

Résumé :

Thesis (MEng)--Stellenbosch University, 2000.<br>ENGLISH ABSTRACT: The main objective of this study to determine the air-side heat transfer and pressure drop performance characteristics of commercially available round and elliptical fined tubes. A . computer code to compare the performance of industrial forced and induced draught aircooled heat exchangers (henceforth referred to as f\CHE's) commonly found in the petrochemical industry is also developed. The comparison is extended to include both round and elliptical finned tubes. From the tests conducted, it is found that there is general

Styles APA, Harvard, Vancouver, ISO, etc.

32

Jones, Gregory Mark. "Quantifying petroleum fouling of refining heat exchangers." Thesis, University of Birmingham, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.690904.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

33

Taherian, Hessam. "Natural convection heat transfer in heat exchangers with vertical helical coils." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0027/NQ31535.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Delattre, Baptiste. "Monitoring of a heat pump system using deep borehole heat exchangers." Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-245880.

Texte intégral

Résumé :

Sweden has been one of the first countries in the world to use ground-source heat pumps (GSHP) to supply heating and cooling to its buildings. Today, it is the leading country in Europe and new installations tend to have larger capacities. The use of deeper borehole heat exchangers (BHE) is an opportunity to extract larger amounts of heat over small land areas. However, there are only few case studies on BHE deeper than 300 m, hence such systems may be optimized. This study focuses on a deep GSHP system recently installed in central Stockholm, composed of four 510 m deep BHE. The objectives we

Styles APA, Harvard, Vancouver, ISO, etc.

35

Meyer, Meyer. "Development of a range of air-to-air heat pipe heat recovery heat exchangers." Thesis, Stellenbosch : University of Stellenbosch, 2004. http://hdl.handle.net/10019.1/16389.

Texte intégral

Résumé :

Thesis (MScIng)--University of Stellenbosch, 2004.<br>ENGLISH ABSTRACT: As the demand for less expensive energy is increasing world-wide, energy conservation is becoming a more-and-more important economic consideration. In light of this, means to recover energy from waste fluid streams is also becoming more-and-more important. An efficient and cost effective means of conserving energy is to recover heat from a low temperature waste fluid stream and use this heat to preheat another process stream. Heat pipe heat exchangers (HPHEs) are devices capable of cost effectively salvaging wasted e

Styles APA, Harvard, Vancouver, ISO, etc.

36

Goodman, Christopher L. "Modeling, validation and design of integrated carbon dioxide heat pumps and water heaters." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/22560.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

37

Harding, Matthew T. "An experimental investigation of the performance of staggered PIN-FIN Array laminar flow heat exchangers." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2005. http://library.nps.navy.mil/uhtbin/hyperion/05Mar%5FHarding.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Yau, Yat Huang. "Energy savings in tropical HVAC systems using heat pipe heat exchangers (HPHXs)." Thesis, University of Canterbury. Mechanical Engineering, 2004. http://hdl.handle.net/10092/6057.

Texte intégral

Résumé :

In hospitals, where the air must be changed at least 15 times per hour, humidity control is as important as controlling the space temperature. The high air change rate applied in hospitals instantly implies that there would be energy-saving potential in using a heat recovery system between the air being exhausted from the conditioned space and the fresh air being supplied in to replace it. In addition, the fact that in very humid climates the moisture removal requirements often necessitates overcooling air and then reheating it implies that there may be a further opportunity for heat exchange

Styles APA, Harvard, Vancouver, ISO, etc.

39

Lyman, Andrew C. "Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers." Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/9752.

Texte intégral

Résumé :

Understanding the mechanisms that serve to increase heat transfer provides valuable knowledge to minimize the size and maximize the performance of compact heat exchangers. This document presents a detailed experimental heat transfer study of six scaled up louvered fin geometries that are typical of those found in modern louvered fin compact heat exchangers. Heat transfer measurements were performed over a range of Reynolds numbers and with two different boundary conditions. A fully heated boundary condition allowed the effects of the thermal field to be observed while an adiabatic boundary con

Styles APA, Harvard, Vancouver, ISO, etc.

40

Lintern, Andrew Charles. "Applications of two-phase flow and heat transfer in compact heat exchangers." Thesis, Imperial College London, 2008. http://hdl.handle.net/10044/1/10549.

Texte intégral

Résumé :

Three applications of two-phase flow and heat transfer in plate-fin heat exchangers have been studied. A dephlegmator is a heat exchanger in which reflux condensation of a vapour mixture occurs, and plate-fln versions have importance in cryogenic gas separation processes. Numerical calculations for different binary mixtures show that the number of transfer units can be expressed as a simple function of the inlet vapour state and flow rate, heat load, and channel geometry. The calculations also show that the vapour and liquid exit compositions tend to limiting values as the number of transfer u

Styles APA, Harvard, Vancouver, ISO, etc.

41

Rastan, Hamidreza. "Investigation of the heat transfer of enhanced additively manufactured minichannel heat exchangers." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264278.

Texte intégral

Résumé :

Mini-/microchannel components have received attention over the past few decades owing to their compactness and superior thermal performance. Microchannel heat sinks are typically manufactured through traditional manufacturing practices (milling and sawing, electrodischarge machining, and water jet cutting) by changing their components to work in microscale environments or microfabrication techniques (etching and lost wax molding), which have emerged from the semiconductor industry. An extrusion process is used to produce multiport minichannel-based heat exchangers (HXs). However, geometric man

Styles APA, Harvard, Vancouver, ISO, etc.

42

Liuzzo, Scorpo Alberto. "Heat transfer in borehole heat exchangers and the contribution of groundwater flow." Doctoral thesis, Università degli studi di Trieste, 2014. http://hdl.handle.net/10077/10123.

Texte intégral

Résumé :

2012/2013<br>The exploitation of geothermal heat by ground source heat pumps is presently growing throughout Europe and the world. In Italy, at the end of 2010, borehole heat exchangers covered most of the 30% of the total energy used for space conditioning, showing an increase of 50%compared to 2005. The forecasts for 2015 suggest a further increase in the direct uses of the geothermal heat exceeding 50% compared to 2010 and a corresponding increase in the geothermal energy consumption. The possibility to design plants with higher efﬁciency and lower costs of installation and operation is re

Styles APA, Harvard, Vancouver, ISO, etc.

43

胡少堅 and Siu-kin Wu. "Corrosion and fouling in heat exchangers cooled by sea water from HongKong harbour." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1987. http://hub.hku.hk/bib/B31208010.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

44

Ramthun, David L. "An experimental study of a pin-fin heat exchanger." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Jun%5FRamthun.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

45

Pacio, Julio César. "Multiscale thermo-hydraulic modeling of cryogenic heat exchangers." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-16090.

Texte intégral

Résumé :

The cryogenic industry has experienced a continuous growth in the last decades, partially sustained by the worldwide development of Liquefaction of Natural Gas (LNG) projects. LNG technology provides an economically feasible way of transporting natural gas over long distances, and currently accounts for nearly 30% of the international trade of this resource. The economic feasibility of these projects, in terms of both capital and operating costs, is to a large extent controlled by the performance of the main cryogenic two-phase flow heat exchanger. This industrial scenario provides then the mo

Styles APA, Harvard, Vancouver, ISO, etc.

46

Magens, Ole Mathis. "Mitigating fouling of heat exchangers with fluoropolymer coatings." Thesis, University of Cambridge, 2019. https://www.repository.cam.ac.uk/handle/1810/287467.

Texte intégral

Résumé :

Fouling is a chronic problem in many heat transfer systems and results in the need for frequent heat exchanger (HEX) cleaning. In the dairy industry, the associated operating cost and environmental impact are substantial. Antifouling coatings are one mitigation option. In this work, the fouling behaviour of fluoropolymer, polypropylene and stainless steel heat transfer surfaces in processing raw milk and whey protein solution are studied. Methodologies to assess the economics of antifouling coatings are developed and applied. Two experimental apparatuses were designed and constructed to study

Styles APA, Harvard, Vancouver, ISO, etc.

47

Righi, Alexandro. "Numerical models and simulations of geothermal heat exchangers." Thesis, KTH, Tillämpad termodynamik och kylteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-185816.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

48

Hayes, Niel Martin. "Condensation of CO₂ in brazed plate heat exchangers." Pullman, Wash. : Washington State University, 2009. http://www.dissertations.wsu.edu/Thesis/Summer2009/n_hayes_072209.pdf.

Texte intégral

Résumé :

Thesis (M.S. in mechanical engineering)--Washington State University, August 2009.<br>Title from PDF title page (viewed on Sept. 21, 2009). "School of Engineering and Computer Science." Includes bibliographical references (p. 82-85).

Styles APA, Harvard, Vancouver, ISO, etc.

49

Protheroe, Michael. "Simulation of variable fluid-properties plate heat exchanger for educational purposes thesis submitted in partial fulfilment of the Masters degree in Engineering, Auckland University of Technology, October 2003." Full thesis. Abstract, 2003. http://puka2.aut.ac.nz/ait/theses/ProtheroeM.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

50

Riahi, Ardeshir. "The use of an approximate integral method to account for intraparticle conduction in gas-solid heat exchangers." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25137.

Texte intégral

Résumé :

The mathematical equations describing transient heat transfer between the fluid flowing through a fixed bed and a moving bed of packing were formulated. The resistance to heat transfer within the packing due to its finite thermal conductivity was taken into account. An approximate integral method was applied to obtain an analytical solution to transient response of the bed packing. Results for two cases of fixed and moving bed were obtained. The validity of the approximate method was checked against the more exact method employed by Handley and Heggs who obtained the results for a fixed bed o

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!