Littérature scientifique sur le sujet « Implants dentaires – Technologie »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Implants dentaires – Technologie ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Implants dentaires – Technologie":
Arruda, Brunna Spósito, et Milton D’Almeida Ferreira Neto. « Levantamento de seio maxilar e instalação de implante no mesmo tempo cirúrgico ». Research, Society and Development 11, no 6 (1 mai 2022) : e39211629350. http://dx.doi.org/10.33448/rsd-v11i6.29350.
DONSIMONI, J., D. GABRIELEFF, P. BERMOT et D. DOHAN. « Les implants maxillofaciaux à plateaux d’assiseConcepts et technologies orthopédiques, réhabilitations maxillomandibulaires, reconstructions maxillofaciales, réhabilitations dentaires partielles, techniques de réintervention, méta-analyse. 4e partie : réhabilitations dentaires partielles ». Implantodontie 13, no 3 (juillet 2004) : 139–50. http://dx.doi.org/10.1016/s1158-1336(04)00048-5.
Gatis, Michelly Cauás de Queiroz, Karoline Gomes da Silveira, Elizabeth Arruda Carneiro Ponzi, Maria da Conceição dos Santos Doblin, Heverson Thiago da Silva Souza, Ana Claudia Amorim Gomes, Ricardo José de Holanda Vasconcellos, Belmiro Cavalcanti do Egito Vasconcelos et Carlos Augusto Pereira do Lago. « Reimplante ou implante na avulsão dentária, o que mudou nesses últimos anos ? Uma revisão narrativa ». Research, Society and Development 11, no 4 (13 mars 2022) : e14011426922. http://dx.doi.org/10.33448/rsd-v11i4.26922.
Lopes, Camila de Carvalho Almança, Allyne Jorcelino Daloia de Carvalho, Morgana Guilherme de Castro Silverio, Luiz Carlos Gonçalves, Paulo Cézar Simamoto Júnior et Veridiana Resende Novais. « Reabilitação de paciente pós câncer de cabeça e pescoço com overdenture inferior sobre dentes : relato de caso ». Research, Society and Development 10, no 7 (30 juin 2021) : e48010716739. http://dx.doi.org/10.33448/rsd-v10i7.16739.
Vilaça, Luiz Felipe Rocha, Matheus Pereira Marques, Robson Rodrigues Garcia et Rhonan Ferreira da Silva. « Comunicação bucossinusal em região de primeiro pré-molar superior – relato de caso atípico ». Research, Society and Development 11, no 1 (8 janvier 2022) : e35311124538. http://dx.doi.org/10.33448/rsd-v11i1.24538.
Thèses sur le sujet "Implants dentaires – Technologie":
Gracia, Alain. « Les impératifs en prothèse adjointe complète : apports des racines sous-prothétiques et des techniques implantaires ». Bordeaux 2, 1994. http://www.theses.fr/1994BOR2OC02.
Issa, Sabin. « Fonctionnalisation de la surface du titane pour les implants dentaires ». Thesis, Paris Est, 2014. http://www.theses.fr/2014PEST1075/document.
The objective of this thesis is to create new nanostructured surfaces with bioactive coatings and to study theirs physicochemical properties in order to develop better dental implants designs and promote their osseointegration. This functionalization was performed in two steps; starting by the nanostructuration of TiO2 surface by anodisation to create reactive sites on the edges of titanium nanotubes which acts as points of “attachment" to bioactive coatings. The second step was the surface chemical modification by coating the nanostructured surface with bioactive coatings of calcium phosphate (CaP) and strontium doped calcium phosphate (Sr.CaP). This coating was performed by pulsed electrodeposition. The physicochemical characterization by XPS, SEM and IR showed that doping with Sr promotes a non-apatitic compound similar to DCPD or DCPA (Dicalcium Phosphate Dihydrate or Anhydrous), while undoped CaP coating looks like an amorphous apatite-like compound ACP. The addition of strontium has the double advantage of optimizing the cellular multiplication and of giving an inorganic phase with bio-performance better than apatitic compounds. We also evaluated the adsorption proprieties of these functionalized surfaces by investigating the adsorption of proteins (BSA). This adsorption was performed onto tblank nanotubes, nanotubes coated with CaP and Sr doped CaP and evaluated according to deposition time and to the pH value of the solution that affect both protein and surface charge. The kinetic and structural evaluation reveals different adsorption geometries according to pH and adsorption time and also according to the chemical nature of surface. Such results of protein adsorption and conformation may form a database to understand and control protein activities and reactions with living body when used for dental implants system
Corne, Pascale. « Contribution à l’étude de l’endommagement des connexions implantaires en odontologie prothétique ». Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0221.
This research based on the study of two levels of damage focused on the implant connection: firstly, the wear associated with the opening/closing cycle dedicated to the manufacturing process; secondly, the damage over the time, that is a fretting-corrosion study of dental implants in human saliva. During the tightening/loosening cycles, damage to all the components is present. The screws that include the majority of the complications have to be changed after 20 tightening cycles. The use of laboratory screws limits the damage and optimizes the preload value. When the prosthesis and the implant are assemblies, the damage appears thanks to fretting/corrosion (tribocorrosion) behavior. This phenomenon does involve synergistic wear and a modification of the microstructure on the fretting surfaces
Delannoy, Stéphanie. « Développement d’alliages de titane innovants à gradient de propriétés pour applications implantaires ». Thesis, Paris 6, 2017. http://www.theses.fr/2017PA066653.
The work carried out concerns the development titanium alloys with elastic gradient. They are part of the development of materials dedicated to dental implantology, in collaboration with the company Biotech Dental. The elastic discontinuity observed at the bone / implant interface has been called into question in the occurrence of bone resorption phenomena which can lead to implant failures. The lowering of the surface modulus could then allow a more appropriate transfer of stresses which would lead to an improvement of the osseointegration. An upstream work, based on the consideration of electronic parameters and biocompatibility elements, made it possible to select alloys which can exhibit a great elastic variability: Ti-13Nb-13Zr (wt.%) and Ti-20Nb-6Zr (at.%). A preliminary study carried out on laminated samples allowed to confirm this variability and to associate the elastic bounds obtained with different microstructural states. On the basis of these observations, we have developed approaches combining sequences of deformation and short heat treatments on massive samples. Thus, on the TNZ, a surface deformation approach by shot peening applied on a β-quenched state made it possible to obtain a gradient of 65 GPa to 85 GPa over 400 μm. And a preferential dissolution approach on the Ti-13-13 has lead to a gradient of 75 GPa to 130 GPa on 100 μm, via the realization of flash thermal treatments on massive samples in the precipitated state previously shot-peened. These results have thus validated the previously designed material - strategy - process combinations. They also allowed a rationalization of the different possible approaches to obtain the elasticity gradient
Molé, Christian. « Intérêts de procédés de nouvelles technologies en chirurgie expérimentale : Implémentations de données médicales en modélisation surfacique tridimensionnelle et en reconstruction plastique par stéréophotolithographie laser : applications en implantologie maxillo-mandibulaire ». Nancy 1, 1996. http://docnum.univ-lorraine.fr/public/SCD_T_1996_0380_MOLE.pdf.
Actes de conférences sur le sujet "Implants dentaires – Technologie":
Baranes, M., et T. Fortin. « Planification et chirurgie guidée - Avis d’experts : Apports des nouvelles technologies en implantologie : de la planification à la réalisation de la prothèse provisoire immédiate ». Dans 66ème Congrès de la SFCO. Les Ulis, France : EDP Sciences, 2020. http://dx.doi.org/10.1051/sfco/20206601011.