Bibliographies thématiques / Injection, Molding, Granite, Ceramics / Articles de revues
Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Injection, Molding, Granite, Ceramics.

Articles de revues sur le sujet « Injection, Molding, Granite, Ceramics »

Auteur : Grafiati
Publié le 4 juin 2021
Mis à jour le 1 février 2022

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Injection, Molding, Granite, Ceramics ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Arakida, Yutaka. « Injection molding of metal and ceramics powder. » Bulletin of the Japan Institute of Metals 26, no 6 (1987) : 473–80. http://dx.doi.org/10.2320/materia1962.26.473.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

TAKAHASHI, Minoru, et Suguru SUZUKI. « Injection molding of ceramics. (2). Rheological problems during mixing and molding. » Journal of the Society of Powder Technology, Japan 25, no 11 (1988) : 755–60. http://dx.doi.org/10.4164/sptj.25.755.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Wright, Jadith K., Mohan J. Edirisinghe, Jian G. Zhang et Julian R. G. Evans. « Particle Packing in Ceramic Injection Molding ». Journal of the American Ceramic Society 73, no 9 (septembre 1990) : 2653–58. http://dx.doi.org/10.1111/j.1151-2916.1990.tb06742.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Kuzmin, Anton M., Vladimir N. Vodyakov, Alexandr V. Kotin, Vyacheslav V. Kuznetsov et Mariya I. Murneva. « Study of the Influence of the Forming Method on the Physical and Mechanical Characteristics of Thermoplastic Polymeric Materials ». Key Engineering Materials 869 (octobre 2020) : 342–47. http://dx.doi.org/10.4028/www.scientific.net/kem.869.342.

Texte intégral
Résumé :
This paper presents the results of the study of the effect of polymer materials compression and injection methods of molding on the physical and mechanical properties of the resulting samples. Widely used polymers such as poly-amide, thermoplastic elastomer and polyketone were taken as the objects of study. Granite composites based on polyamide were produced by PolyLab Rheomex RTW 16 twin-screw extruder, then modified with fine powders of schungite, graphite and silicon dioxide. Samples for testing in the form of double-sided blades were obtained by injection molding on a Babyplast 6/10V machine and compression molding on a Gibitre hydraulic press. Elastic-strength tests of the obtained samples were carried out on a tensile testing machine UAI-7000 M.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Hecht, James L. « Macrocomposites made by injection molding ». Polymer Composites 7, no 3 (juin 1986) : 186–90. http://dx.doi.org/10.1002/pc.750070309.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Saitoh, Katsuyoshi, Yoshimitsu Kankawa, Kei Ameyama et Yasunari Kaneko. « Application of Binder Extraction to Ceramics Injection Molding Parts. » Journal of the Japan Society of Powder and Powder Metallurgy 38, no 5 (1991) : 627–29. http://dx.doi.org/10.2497/jjspm.38.627.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Yang, Xian Feng, Zhi Peng Xie et Lin Lin Wang. « Fabrication of Porous Zirconia Ceramics by Injection Molding Method ». Key Engineering Materials 368-372 (février 2008) : 758–61. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.758.

Texte intégral
Résumé :
An innovative processing route for fabricating porous zirconia ceramics has been developed based on traditional injection molding method. Azodicarbonamide (AC) was used as the foaming agents and mixed with the zirconia powder and conventional binders (polypropylene, ethylene/vinyl acetate, paraffin wax and stearic acid). There were three stages in the foaming course: (1) Small bubbles nucleated when AC decomposed into N2 and CO in the barrel. (2) Viscosity and pressure drop led to the growth of the bubbles when the melt feedstock was injected into the die cavity. (3) The porous structure was kept in the solidified body. The AC content and injection parameters were optimized to control the pore density and size. The porous green body was debinded at the heating-up rate of 0.5 °C /min to 450°C and sintered at 1550°C. Samples with porosity of 40%-50% and pore sizes from 200-250μm were prepared when the addition of AC was 0.3% by weight. The results showed that ceramic injection molding method was also suitable for fabricating the porous ceramics.
Styles APA, Harvard, Vancouver, ISO, etc.
8

OHSAKA, Shigeru, Hideo TAKAHASHI, Nobuhiro SHINOHARA, Masataro OKUMIYA, Hiroshige ITO et Keizo UEMATSU. « Microstructure of Alumina Ceramics Made by Injection Molding Process ». Journal of the Ceramic Society of Japan 104, no 1210 (1996) : 567–70. http://dx.doi.org/10.2109/jcersj.104.567.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Gao, Yan, Kang Ming Huang, Zhen Kun Fan et Zhi Peng Xie. « Injection Molding of Zirconia Ceramics Using Water-Soluble Binder ». Key Engineering Materials 336-338 (avril 2007) : 1017–20. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.1017.

Texte intégral
Résumé :
Water-soluble binder based injection molding of submicrometer-sized and stabilized zirconia was reported in this paper. The binder phase is chosen as the mixtures of polyethylene glycol, high-density polyethylene, polyvinyl butyral and stearic acid. Binder removal is accomplished by a two-steped process. The water-soluble constituent is firstly removed by dissolution in the water and the remaining is removed through the followed thermal treatment. The apparent viscosities of different kinds of feedstock were tested. The influences of water-leaching time and temperature on the efficiency of PEG removal were discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kryuchkov, Yu N., et V. V. Lashneva. « Injection molding plant for ceramic production ». Glass and Ceramics 55, no 9-10 (septembre 1998) : 317–18. http://dx.doi.org/10.1007/bf02694778.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Singh, R., F. Chen et F. R. Jones. « Injection molding of glass fiber reinforced phenolic composites. 2 : Study of the injection molding process ». Polymer Composites 19, no 1 (février 1998) : 37–47. http://dx.doi.org/10.1002/pc.10073.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

KANKAWA, Yoshimitsu, Yasunari KANEKO et Katsuyoshi SAITOU. « Injection Molding of β-TCP Powder ». Journal of the Ceramic Society of Japan 100, no 1158 (1992) : 211–14. http://dx.doi.org/10.2109/jcersj.100.211.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
13

Kankawa, Yoshimitsu, Katsuyoshi Saitou, Yasunari Kaneko et Norio Kasahara. « Injection Molding of Ceramics Powder(CIM) with Polyethylene Glycol(PEG). » Journal of the Japan Society of Powder and Powder Metallurgy 38, no 6 (1991) : 777–81. http://dx.doi.org/10.2497/jjspm.38.777.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Miyamoto, Kei, Yuzuru Takahashi, Suguru Inamura et Hiroki Miyamoto. « Preparation of Al2O3 ceramics by low pressure injection molding method. » Journal of the Japan Society of Powder and Powder Metallurgy 34, no 9 (1987) : 378–82. http://dx.doi.org/10.2497/jjspm.34.378.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Miyamoto, Kei, Yuzuru Takahashi, Suguru Inamura et Hiroki Miyamoto. « Preparation of Si3N4 ceramics by low pressure injection molding method. » Journal of the Japan Society of Powder and Powder Metallurgy 35, no 7 (1988) : 633–35. http://dx.doi.org/10.2497/jjspm.35.633.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Ruprecht, R., T. Gietzelt, K. Müller, V. Piotter et J. Haußelt. « Injection molding of microstructured components from plastics, metals and ceramics ». Microsystem Technologies 8, no 4-5 (1 août 2002) : 351–58. http://dx.doi.org/10.1007/s00542-001-0153-7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

NAGAI, Yumi, Satoshi KOBAYASHI et Toshiko OSADA. « Fabrication and Characterization of Biocompatible Oxide Ceramics by Injection Molding ». Proceedings of the JSME Conference on Frontiers in Bioengineering 2020.31 (2020) : 2C20. http://dx.doi.org/10.1299/jsmebiofro.2020.31.2c20.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
18

Pritchard, M., et A. G. Gibson. « Property modification of bulk molding compounds for use in injection molding ». Polymer Composites 9, no 2 (avril 1988) : 131–38. http://dx.doi.org/10.1002/pc.750090206.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Fanelli, Anthony J., Robert D. Silvers, William S. Frei, Joan V. Burlew et Gary B. Marsh. « New Aqueous Injection Molding Process for Ceramic Powders ». Journal of the American Ceramic Society 72, no 10 (octobre 1989) : 1833–36. http://dx.doi.org/10.1111/j.1151-2916.1989.tb05987.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

Mao, Qianchao, Yifeng Hong, Tom P. Wyatt, Jinnan Chen, Youjiang Wang, Jian Wang et Donggang Yao. « Insert injection molding of polypropylene single-polymer composites ». Composites Science and Technology 106 (janvier 2015) : 47–54. http://dx.doi.org/10.1016/j.compscitech.2014.11.002.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

Templeton, P. A. « Strength Predictions of Injection Molding Compounds ». Journal of Reinforced Plastics and Composites 9, no 3 (mai 1990) : 210–25. http://dx.doi.org/10.1177/073168449000900301.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

Nunn, Robert E., et Cory P. Grolman. « Adaptive Process Control for Injection Molding ». Journal of Reinforced Plastics and Composites 9, no 3 (mai 1990) : 282–98. http://dx.doi.org/10.1177/073168449000900307.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Krindges, Israel, Raquel Andreola, Cláudio A. Perottoni et Janete E. Zorzi. « Low-Pressure Injection Molding of Ceramic Springs ». International Journal of Applied Ceramic Technology 5, no 3 (mai 2008) : 243–48. http://dx.doi.org/10.1111/j.1744-7402.2008.02226.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
24

Xiao-chun, Yin, Zeng Wen-bin, He Guang-jian, Yang Zhi-tao et Qu Jin-ping. « Influence of pressure oscillation on injection molding process ». Journal of Thermoplastic Composite Materials 27, no 10 (24 septembre 2013) : 1417–27. http://dx.doi.org/10.1177/0892705713505612.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Rémillard, B., T. Vu-Khanh, B. Fisa et S. Naik. « Reaction injection molding of mica reinforced polyurethane ». Polymer Composites 7, no 5 (octobre 1986) : 395–403. http://dx.doi.org/10.1002/pc.750070517.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
26

Miyamoto, Kei, Yuzuru Takahashi, Suguru Inamura et Hiroki Miyamoto. « Preparation of Si3N4 ceramics by low pressure injection molding method. (II). » Journal of the Japan Society of Powder and Powder Metallurgy 36, no 2 (1989) : 192–94. http://dx.doi.org/10.2497/jjspm.36.192.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

German, Randall, et Robert Cornwall. « The Worldwide Market and Technology for Injection Molding Metals and Ceramics ». Materials Technology 12, no 3-4 (janvier 1997) : 119–20. http://dx.doi.org/10.1080/10667857.1997.11752742.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Fukumoto, Isao, Eiki Arakaki, Shunei Mekaru et Jiro Matsuda. « 215 Development of Ceramics Injection Molding Technology Using Clay and Sludge ». Proceedings of Conference of Chugoku-Shikoku Branch 005.2 (2000) : 61–62. http://dx.doi.org/10.1299/jsmecs.005.2.61.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Sakai, Tadamoto. « State of the art of injection molding of high-performance ceramics ». Advances in Polymer Technology 11, no 1 (1991) : 53–67. http://dx.doi.org/10.1002/adv.1991.060110107.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
30

Dönmez, Sinan, et Aykut Kentli. « Influence of injection molding parameters on electrical resistivity of carbon nanotube reinforced polycarbonate ». Science and Engineering of Composite Materials 23, no 2 (1 mars 2016) : 135–44. http://dx.doi.org/10.1515/secm-2013-0291.

Texte intégral
Résumé :
AbstractElectrical properties of plastic products can be adjusted by adding a certain amount of carbon nanotubes (CNT) in the injection molding process. However, injection molding parameters should be arranged carefully due to their influence on electrical properties of CNT-reinforced plastic composites. In this study, polycarbonate/CNT nanocomposites, having three different CNT concentrations (1, 3 and 5 wt%), were produced and injection molded by using three different injection temperatures and speeds to investigate their influence on electrical resistivity. It was found that the electrical resistivity was influenced greatly by the injection temperature when 1 wt% amount of CNT was used in the nanocomposite. However, the effect of injection speed was negligible.
Styles APA, Harvard, Vancouver, ISO, etc.
31

Wiesner, V. L., J. P. Youngblood et R. W. Trice. « Room-temperature injection molding of aqueous alumina-polyvinylpyrrolidone suspensions ». Journal of the European Ceramic Society 34, no 2 (février 2014) : 453–63. http://dx.doi.org/10.1016/j.jeurceramsoc.2013.08.017.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
32

Wright, Judith K., Julian R. G. Evans et Mohan J. Edirisinghe. « Degradation of Polyolefin Blends Used for Ceramic Injection Molding ». Journal of the American Ceramic Society 72, no 10 (octobre 1989) : 1822–28. http://dx.doi.org/10.1111/j.1151-2916.1989.tb05985.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
33

German, Randall M. « Homogeneity Effects on Feedstock Viscosity in Powder Injection Molding ». Journal of the American Ceramic Society 77, no 1 (janvier 1994) : 283–85. http://dx.doi.org/10.1111/j.1151-2916.1994.tb06992.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Malzahn, J. C., et J. M. Schultz. « Transverse core fiber alignment in short-fiber injection-molding ». Composites Science and Technology 25, no 3 (janvier 1986) : 187–92. http://dx.doi.org/10.1016/0266-3538(86)90009-6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

Pedroti, Leonardo Gonçalves, S. N. Monteiro, C. M. Vieira et J. Alexandre. « Properties and Microstructure of Clay Ceramics with Granite Waste for Press-Molded Structural Block ». Materials Science Forum 727-728 (août 2012) : 809–14. http://dx.doi.org/10.4028/www.scientific.net/msf.727-728.809.

Texte intégral
Résumé :
Extrusion of a clay body is the most applied process in the ceramic industries for manufacturing structural blocks. Nowadays, the assembly of such blocks through a fitting system is gaining attention owing to the saving in material and reducing in the cost of the building construction. However, this fitting system requires a press-molding, rather than extrusion, to allow blocks to be fabricated with different shapes. In this work, the ideal composition of clay bodies incorporated with granite powder waste was investigated for the production of press-molded ceramic blocks. An experimental design was applied to determine the optimum properties and microstructures. Press load of 15 ton and temperatures from 850 to 1050°C were considered. The results indicated that mechanical strength of 30 MPa and water absorption of 15% could be attained with the incorporation of up to 17% of granite powder waste.
Styles APA, Harvard, Vancouver, ISO, etc.
36

Chen, Shia-Chung, Yung-Chung Chen, Nien-Tien Cheng et Ming-Shyan Huang. « Simulations and Applications of Injection-Compression Molding ». Journal of Reinforced Plastics and Composites 18, no 8 (mai 1999) : 724–34. http://dx.doi.org/10.1177/073168449901800803.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
37

Chen, Chun-Sheng, Wei-Seng Cheng, Tzung-Shinug Wang et Rean-Der Chien. « Optimum Design of Gas-assisted Injection Molding ». Journal of Reinforced Plastics and Composites 24, no 15 (17 juin 2005) : 1577–86. http://dx.doi.org/10.1177/0731684405050395.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

Yu, Xin Gang, Lan Yun Liu, Yan Bin Zuo, Zhi Peng Xie, Bo Lin Wu, Jin Long Yang, Jian Bao Li, Yong Huang, Lin Wang et Yi Gong. « On the Defects in Injection-Moulded Technical Ceramics ». Key Engineering Materials 336-338 (avril 2007) : 1025–27. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.1025.

Texte intégral
Résumé :
A heated sprue device for ceramic injection moulding was used to research the defects in injection-moulded technical ceramics. By use of the heated sprue device, the problem of sprue solidification was resolved and the density of the injection moulding specimens was increased while the defects eliminated. The influence of the processing parameters on the defects of the injection molding specimens was investigated in detail by X-ray radiography camera and photograph. It turns that the sprue solidification time has much influence on the defects in injection-moulded technical ceramics. Reasons causing the results above were also analyzed. Based on the research, bars of 20mm in diameter without macroscopic defects and turbine blade of fine property with Si3N4/SiC(w) materials were prepared by injection moulding.
Styles APA, Harvard, Vancouver, ISO, etc.
39

Gosselin, R., D. Rodrigue et B. Riedl. « Injection Molding of Postconsumer Wood–Plastic Composites I : Morphology ». Journal of Thermoplastic Composite Materials 19, no 6 (novembre 2006) : 639–57. http://dx.doi.org/10.1177/0892705706067484.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

Zhang, Jixiang, Xiaoyi Yin, Fengzhi Liu et Pan Yang. « The simulation of the warpage rule of the thin-walled part of polypropylene composite based on the coupling effect of mold deformation and injection molding process ». Science and Engineering of Composite Materials 25, no 3 (25 avril 2018) : 593–601. http://dx.doi.org/10.1515/secm-2015-0195.

Texte intégral
Résumé :
Abstract Aiming at the problem that a thin-walled plastic part easily produces warpage, an orthogonal experimental method was used for multiparameter coupling analysis, with mold structure parameters and injection molding process parameters considered synthetically. The plastic part deformation under different experiment schemes was comparatively studied, and the key factors affecting the plastic part warpage were analyzed. Then the injection molding process was optimized. The results showed that the important order of the influence factors for the plastic part warpage was packing pressure, packing time, cooling plan, mold temperature, and melt temperature. Among them, packing pressure was the most significant factor. The optimal injection molding process schemes reducing the plastic part warpage were melt temperature (260°C), mold temperature (60°C), packing pressure (150 MPa), packing time (2 s), and cooling plan 3. In this situation, the forming plate flatness was better.
Styles APA, Harvard, Vancouver, ISO, etc.
41

Liu, W., et Z. Xie. « Pressureless sintering behavior of injection molded alumina ceramics ». Science of Sintering 46, no 1 (2014) : 3–13. http://dx.doi.org/10.2298/sos1401003l.

Texte intégral
Résumé :
The pressureless sintering behaviors of two widely used submicron alumina (MgOdoped and undoped) with different solid loadings produced by injection molding have been studied systematically. Regardless of the sinterability of different powders depending on their inherent properties, solid loading plays a critical role on the sintering behavior of injection molded alumina, which greatly determines the densification and grain size, and leads to its full densification at low temperatures. As compared to the MgO-doped alumina powder, the undoped specimens exhibit a higher sinterability for its smaller particle size and larger surface area. While full densification could be achieved for MgO-doped powders with only a lower solid loading, due to the fact that MgO addition can reduce the detrimental effect of the large pore space on the pore-boundary separation.
Styles APA, Harvard, Vancouver, ISO, etc.
42

Chen, C. S. « Determination of the Injection Molding Process Parameters in Multicavity Injection Molds ». Journal of Reinforced Plastics and Composites 25, no 13 (23 mars 2006) : 1367–73. http://dx.doi.org/10.1177/0731684406065080.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
43

TAKAHASHI, Minoru, et Suguru SUZUKI. « Injection molding of ceramics. (1). History, processing and rheology of organic additives. » Journal of the Society of Powder Technology, Japan 25, no 7 (1988) : 456–61. http://dx.doi.org/10.4164/sptj.25.456.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
44

Lin, Samuel I.-En. « Near-net-shape forming of zirconia optical sleeves by ceramics injection molding ». Ceramics International 27, no 2 (janvier 2001) : 205–14. http://dx.doi.org/10.1016/s0272-8842(00)00065-1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
45

Lindqvist, Karin, Elis Carlstrom, Michael Persson et Roger Carlsson. « Organic Silanes and Titanates as Processing Additives for Injection Molding of Ceramics ». Journal of the American Ceramic Society 72, no 1 (janvier 1989) : 99–103. http://dx.doi.org/10.1111/j.1151-2916.1989.tb05960.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
46

Uematsu, Keizo, Shigeru Ohsaka, Nobuhiro Shinohara et Masataro Okumiya. « Grain-Oriented Microstructure of Alumina Ceramics Made through the Injection Molding Process ». Journal of the American Ceramic Society 80, no 5 (21 janvier 2005) : 1313–15. http://dx.doi.org/10.1111/j.1151-2916.1997.tb02985.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
47

Han, Jun Sae, Dong Yong Park, Dongguo Lin, Kwang Hyun Chung, Ravi Bollina et Seong Jin Park. « Development of Powder Injection Molding Process for a Piezoelectric PAN-PZT Ceramics ». Journal of Korean Powder Metallurgy Institute 23, no 2 (30 avril 2016) : 112–19. http://dx.doi.org/10.4150/kpmi.2016.23.2.112.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
48

Li, Xiping, Ningning Gong, Can Yang, Shuiping Zeng, Shihong Fu et Ke Zhang. « Aluminum/polypropylene composites produced through injection molding ». Journal of Materials Processing Technology 255 (mai 2018) : 635–43. http://dx.doi.org/10.1016/j.jmatprotec.2018.01.008.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
49

Hine, P. J., R. A. Duckett, I. M. Ward, P. S. Allan et M. J. Bevis. « A comparison of short glass fiber reinforced polypropylene plates made by conventional injection molding and using shear controlled injection molding ». Polymer Composites 17, no 3 (juin 1996) : 400–407. http://dx.doi.org/10.1002/pc.10627.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
50

Duh, Robert J., Susan Mantell, Jeffrey H. Vogel et Robert S. Maier. « Optimization of cure kinetics parameter estimation for structural reaction injection molding/resin transfer molding ». Polymer Composites 22, no 6 (décembre 2001) : 730–41. http://dx.doi.org/10.1002/pc.10575.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Injection, Molding, Granite, Ceramics » pour d’autres types de sources :
Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie