Articles de revues : « Jacmel »

1

Depestre, Rene, et Carrol F. Coates. « A Return to Jacmel ». Callaloo 24, n^o 4 (2001) : 983–90. http://dx.doi.org/10.1353/cal.2001.0244.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Hadjadj, Bernard, et Alain Sancerni. « Jacmel : pôle de développement culturel et touristique ». Museum International (Edition Francaise) 62, n^o 4 (décembre 2010) : 124–33. http://dx.doi.org/10.1111/j.1755-5825.2011.01116.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

McCormick, Robert H., et Edwidge Danticat. « After the Dance : A Walk through Carnival in Jacmel, Haiti ». World Literature Today 77, n^o 3/4 (2003) : 88. http://dx.doi.org/10.2307/40158207.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Hadjadj, Bernard, et Alain Sancerni. « Jacmel : A Centre for the Development of Culture and Tourism ». Museum International 62, n^o 4 (décembre 2010) : 116–24. http://dx.doi.org/10.1111/j.1468-0033.2011.01750.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Aristil, Junior, et Luger Jean Simon. « Pheno-morphological diversity of Haitian taro cultivars ». International Journal of Biological and Chemical Sciences 13, n^o 7 (13 février 2020) : 3266–75. http://dx.doi.org/10.4314/ijbcs.v13i7.23.

Texte intégral

Résumé :

Taro corm is consumed in Haiti as a sustain against malnutrition, but no study was so far reported about Haitian taro. An ongoing breeding program, aimed at supporting corm production, includes the present investigations on taro. Eleven taro accessions sampled in 9 departments of Haiti were tested at Torbeck from January to August 2018. Seven variables were considered and treated with SPSS. Significant (p < 0.05) differences appeared for three of the seven considered traits. Corm marketable yield varied from 2.97 to 12.79 t/ha (p<0.05), the locations with the largest yield being Coteaux (South department, 12.79 t/ha), Petite- Riviére de Nippes (Nippes department, 7.56 t/ha) and Jacmel (South East department, 7.01 t/ha). Corm marketable yield was significantly (p < 0.001) and directly related with weight of corm per plant (ρ = 0.999), leaf length (ρ = 0.924) and leaf width (ρ = 0.795). Haitian taro cultivars were divided in three separate clusters. The largest differences concerned taro accessions from Grande Rivière du Nord and Coteaux. The results of this study show that accessions from Coteaux, Petite Riviére de Nippes and Jacmel should be recommended in the plant selection program to increase corm production in Haiti.Keywords: Taro, marketable yield, diversity, cultivars, Haiti.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Severe, Rolord, et María Beatriz Vera O. « Caracterización de la agricultura familiar campesina, comuna de Cayes-Jacmel, Haití ». Idesia (Arica) 32, n^o 3 (août 2014) : 65–74. http://dx.doi.org/10.4067/s0718-34292014000300009.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Kern, Abigaïl-Laure. « De ville moyenne à ville intermédiaire : les dynamiques de Jacmel et son positionnement en Haïti ». Cahiers d'Outre-Mer LXXII, n^o 279 (1 janvier 2019) : 267–88. http://dx.doi.org/10.4000/com.10262.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

beasley, myron m. « Women, Sabotaj, and Underground Food Economies in Haiti ». Gastronomica 12, n^o 2 (2012) : 33–44. http://dx.doi.org/10.1525/gfc.2012.12.2.33.

Texte intégral

Résumé :

The movement of people and capital around the world necessitates that we explore the ways in which women interact with food through varying enterprises. Many of these activities are considered “off the books” or part of a shadow or underground economy. This alternative economic space usually involves otherwise law-abiding citizens who seek to provide for their families in ways that fall outside the formal economy. This ethnographic project examines four female street-food vendors of Jacmel, Haiti. This project considers what happens when the underground becomes the primary means of survival. Some could argue that the “informal system” reinforces a traditional patriarchy gender performance, yet the women reveal a system that sustains community and provides food for the masses in a more efficient and effective way than the government-sponsored programs while simultaneously encouraging a sense of agency, support, and a highly developed community networking system.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Turgeon, Laurier, et Michelet Divers. « Le patrimoine culturel immatériel pour la refondation de Jacmel Jakmèl kenbe la, se fòs peyi a !1 ». Museum International (Edition Francaise) 62, n^o 4 (décembre 2010) : 113–23. http://dx.doi.org/10.1111/j.1755-5825.2011.01122.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Dalmaso, Flávia. « Heranças de família : terras, pessoas e espíritos no sul do Haiti ». Mana 24, n^o 3 (décembre 2018) : 96–123. http://dx.doi.org/10.1590/1678-49442018v24n3p096.

Texte intégral

Résumé :

Resumo Este artigo trata das relações entre pessoas, terras e espíritos na região de Jacmel, sul do Haiti. Esses espíritos, conhecidos como lwa e relacionados ao vodu haitiano, constroem suas existências a partir de uma relação profunda que mantêm com a terra onde habitam e, ao mesmo tempo, com os descendentes daquele que primeiro teria ocupado esta terra. Sendo parte de um legado familiar transmitido ao longo de sucessivas gerações, eles precisam ser cuidados e alimentados sob o risco de se tornarem agressivos, ameaçando a vida tanto dos seus herdeiros quanto a de seus familiares mais próximos. Tomando como base a reconstrução de certos acontecimentos que envolvem a relação entre um desses espíritos e a família de meus anfitriões, o texto busca recuperar sentimentos, opiniões, saberes e práticas em que os lwa são parte fundamental da experiência social das pessoas, atingindo-as diretamente e interferindo em seus destinos, independentemente das suas filiações religiosas.

Styles APA, Harvard, Vancouver, ISO, etc.

11

Turgeon, Laurier, et Michelet Divers. « Intangible Cultural Heritage in the Rebuilding of Jacmel and Haiti Jakmèl kenbe la, se fòs peyi a!1 ». Museum International 62, n^o 4 (décembre 2010) : 106–15. http://dx.doi.org/10.1111/j.1468-0033.2011.01751.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

12

Corten, André, et Vanessa Molina. « Le « mauvais sujet » de l’aide humanitaire en Haïti : relance de l’imaginaire social ». Articles 34, n^o 3 (27 janvier 2016) : 59–79. http://dx.doi.org/10.7202/1034777ar.

Texte intégral

Résumé :

Le séisme a fait s’imposer en Haïti l’ordre disciplinaire des organisations non gouvernementales. Tout en apportant de façon plus ou moins satisfaisante du secours aux populations de l’immense zone affectée, l’urgence humanitaire, épurant d’affects l’expression de la souffrance, est parvenue à atteindre la capacité collective d’imaginer de la société haïtienne. Cependant, ce n’est pas tout le monde qui a répondu à l’interpellation « Eh ! toi qu’on est venu aider ». L’objet de cet article est de voir, à travers la parole recueillie lors d’entrevues de terrain à Jacmel, à Léogâne et à Port-au-Prince en 2012 et 2013, comment la figure du « mauvais sujet » qui ne réagit pas à cette interpellation réactive l’imaginaire social. Le « mauvais sujet » n’est pas une catégorie sociologique. C’est plutôt un cliché auquel on associe une certaine connivence ou qu’on pointe du doigt. Colle à cette figure la réputation de « ne pas faire comme il faut », d’être à la limite de l’acceptable. En même temps, elle renvoie à une certaine fierté, une certaine débrouillardise ; on ne se voit pas comme un démuni. Cette fierté du « mauvais sujet » est une expression de la souffrance. Elle ne débouche pas nécessairement sur des protestations collectives, mais secoue l’imaginaire social.

Styles APA, Harvard, Vancouver, ISO, etc.

13

Jean-Denis, Sardou, Daniel Jean-Pierre, Madeleine Mutel, Hervé Duchaufour, Christian Langlais, Paula Fernandes, Marie-Eunide Alphonse et Éric Malézieux. « Évolution de la structure d’un système agroforestier en relation avec le cycle de vie familial : cas du jardin de case en Haïti ». BOIS & ; FORETS DES TROPIQUES 321, n^o 321 (17 juillet 2014) : 7. http://dx.doi.org/10.19182/bft2014.321.a31213.

Texte intégral

Résumé :

Le jardin créole, communément appelé jardin lakou en Haïti, est un système agro- forestier multistrates et à usages multi- ples. Ce système de culture ancien conti- nue à occuper une place prépondérante dans le paysage agraire et dans l’équili- bre des petites exploitations agricoles des zones de montagne, notamment dans le contexte de crise écologique, éco- nomique et sociale que traverse le pays. Cet article cherche à déterminer les fac- teurs qui orientent la structure de la végé- tation du jardin lakou et son rôle dans les exploitations agricoles. L’étude a été menée sur deux petites régions agri- coles : Salagnac et Lavallée de Jacmel. L’analyse a confirmé la grande richesse spécifique des jardins lakou avec un total de 69 espèces potentiellement utilisables et le rôle central du jardin dans les fonc- tions essentielles d’autosuffisance ali- mentaire et d’auto-approvisionnement en produits non alimentaires des exploita- tions agricoles haïtiennes de montagne. Ce travail met en évidence l’influence du mode de tenure foncière et du mode de transmission sur la trajectoire d’évolution et la pérennisation du jardin lakou. Il a ainsi été montré que les différentes struc- tures écologiques (composition, organi- sation) observables dans les jardins sont liées aux stades de développement de l’exploitation agricole (implantation, croissance, héritage, etc.).

Styles APA, Harvard, Vancouver, ISO, etc.

14

Vollrath, Patrick. « Die Jacke (The Jacket) ». Short Film Studies 7, n^o 2 (1 octobre 2017) : 195–97. http://dx.doi.org/10.1386/sfs.7.2.195_7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Santamaria, Estefania, Jean Ronald Cornely, Georges Dubuche et Vincent DeGennaro. « National Breast Cancer Chemotherapy Program in Haiti ». Journal of Global Oncology 2, n^o 3_suppl (juin 2016) : 20s. http://dx.doi.org/10.1200/jgo.2016.004275.

Texte intégral

Résumé :

Abstract 19 Background: Project Medishare launched a breast cancer program in Port-au-Prince in 2013 at the request of local partners. In 2015, the program was expanded as part of a national breast cancer treatment program with Equal Health International. With the mission of strengthening Haiti’s Ministry of Health (MSPP) cancer care infrastructure, the program seeks to decentralize cancer care for women living up to eight hours driving distance from Port-au-Prince by building hospital capacity for cancer screening, diagnosis, chemotherapy and hormone therapy provision at outlying hospitals. Methods: In 2013, two physicians and three nurses were trained to handle, mix and administer chemotherapy by American nurses and doctors. To expand the national program in January 2015, 20 additional physicians and 32 nurses from all ten geographic regions underwent a three-day training in Port-au-Prince on treatment algorithms and practical training for breast cancer. As patients came in for treatment at the local institutions, Project Medishare nurses were on site to supervise mixing and administration of chemotherapy. Physicians continued their practical training via telemedicine to confirm treatment plans and dosage calculations. Results: By September 2015, onsite practical training and chemotherapy had occurred at the primary public hospitals in Gonaives, Jacmel, and Les Cayes. One physician and three nurses were fully trained at each site and seven patients with breast cancer have been treated thus far at the new sites. Future efforts will focus on quality improvement and continuing onsite training at the other hospitals as well as encouraging more doctors and patients to utilize regional programs instead of coming to the capital for treatment. Conclusion: To our knowledge, this is the first regularly-operating multi-site chemotherapy program in a low-income country. Our experiences may inform others to expand already established protocol-based cancer programs in low-resource settings. Next steps include working with MSPP to expand chemotherapy access to Cap-Haitien and to launch breast reconstruction programs through similar trainings in Port-au-Prince. AUTHORS' DISCLOSURES OF POTENTIAL CONFLICTS OF INTEREST: No COIs from the authors.

Styles APA, Harvard, Vancouver, ISO, etc.

16

Yang, Jae-Seung, Ju-Yong Park et Moon-Ho Lee. « Properties and Characteristics of Jacket Matrices ». Journal of The Institute of Internet, Broadcasting and Communication 15, n^o 3 (30 juin 2015) : 25–33. http://dx.doi.org/10.7236/jiibc.2015.15.3.25.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

17

Klein, Ivan. « Jacket ». Leviathan 11, n^o 1 (mars 2009) : 85–86. http://dx.doi.org/10.1111/j.1750-1849.2009.01332.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Jackes, Betsy R. « Revision of Myrsine (Myrsinaceae) in Australia ». Australian Systematic Botany 18, n^o 5 (2005) : 399. http://dx.doi.org/10.1071/sb04022.

Texte intégral

Résumé :

The genus Myrsine L., has been revised for Australia. The broader circumscription of the genus including Rapanea Aubl., has been followed. Twenty species are described, including twelve new species: Myrsine arenaria Jackes, M. angusta Jackes, M. elata Jackes, M. ireneae Jackes, M. kimberleyensis Jackes, M. maculata Jackes, M. oreophila Jackes, M. pedicellata Jackes, M. richmondensis Jackes, M. rubiginosa Jackes, M. serpenticola Jackes, M. smithii Jackes. One new combination is made, Myrsine howittiana (F. Muell. ex Mez) Jackes. Four species M. howittiana (F. Muell. ex Mez) Jackes, M. porosa F. Muell., M. variabilis R.Br., and M. subsessilis F. Muell., are lectotypified. New subspecies described are M. ireneae subsp. curvata and M. subsessilis subsp. cryptostemon. All appropriate combinations have been made for Australian mainland species as well as for species occurring on Lord Howe and Norfolk Islands. A key to the species is provided. The main character states are discussed, particularly the nature of the trichomes, the glands or secretory structures, and aspects of the inflorescence and the flowers.

Styles APA, Harvard, Vancouver, ISO, etc.

19

Park, Ju Yong, Jeong Su Kim, Ferenc Szollosi et Moon Ho Lee. « The Toeplitz Circulant Jacket Matrices ». Journal of the Institute of Electronics and Information Engineers 50, n^o 7 (25 juillet 2013) : 19–26. http://dx.doi.org/10.5573/ieek.2013.50.7.019.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

20

Benzel, Edward C., Theresa A. Hadden et Carla M. Saulsbery. « A comparison of the Minerva and halo jackets for stabilization of the cervical spine ». Journal of Neurosurgery 70, n^o 3 (mars 1989) : 411–14. http://dx.doi.org/10.3171/jns.1989.70.3.0411.

Texte intégral

Résumé :

✓ The motion at each intervertebral level permitted by the halo jacket and the thermoplastic Minerva body jacket was compared in 10 ambulatory patients with an unstable cervical spine. The thermoplastic Minerva body jacket is a new lightweight modification of a Minerva jacket which is fabricated from Polyform (a splinting material made of a polyester polycaprolactone) and Polycushion (a closed-cell foam for padding). Each patient served as his/her own control. The average movement from flexion to extension at each intervertebral level was significantly less in the thermoplastic Minerva body jacket (2.3° ± 1.7°) than in the halo jacket (3.7° ± 3.1°) (p < 0.0025). This difference is attributable to the “snaking phenomenon” encountered with halo jacket immobilization and should be taken into account when considering an external splint for an unstable cervical spine. The thermoplastic Minerva body jacket also offered a substantial improvement in comfort for the patient over that experienced in the halo jacket. The apparent advantage with respect to stability and comfort of the thermoplastic Minerva body jacket over the halo jacket suggests that the former device is the orthosis of choice for ambulatory stabilization of most patients with an unstable posttraumatic cervical spine injury.

Styles APA, Harvard, Vancouver, ISO, etc.

21

Springman, S. M. « Jachen Huder ». Géotechnique 59, n^o 9 (novembre 2009) : 795. http://dx.doi.org/10.1680/geot.ob.8.0003.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Rochkovski, Olga. « The Jacket ». Australian and New Zealand Journal of Family Therapy (ANZJFT) 29, n^o 4 (décembre 2008) : 226. http://dx.doi.org/10.1375/anft.29.4.226.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

23

BURRIDGE, TERRY. « Agnes's Jacket ». Journal of Psychiatric and Mental Health Nursing 20, n^o 4 (15 mars 2013) : e4-e5. http://dx.doi.org/10.1111/j.1365-2850.2012.01940.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

24

Park, Ju Yong, Md Hashem Ali Khan, Jeong Su Kim et Moon Ho Lee. « Inverse-Orthogonal Jacket-Haar and DCT Transform ». Journal of the Institute of Electronics and Information Engineers 51, n^o 9 (25 septembre 2014) : 30–40. http://dx.doi.org/10.5573/ieie.2014.51.9.030.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

25

Gu, Jun, Yuan Qiang Xu et Jing Jing Zhou. « Failure Analysis of Early Fracture for Diesel Engine Cylinder Liner ». Advanced Materials Research 461 (février 2012) : 177–81. http://dx.doi.org/10.4028/www.scientific.net/amr.461.177.

Texte intégral

Résumé :

This article, through the cylinder jacket break phenomenon which occurs to the diesel engine early time carries on the failure analysis, suggests that the cylinder jacket material ingredient control is lax, causes the cylinder jacket material brittleness to be oversized, the tool escape acute angle is the cylinder jacket break primary cause, and proposes corresponding regulatory measures prevent the cylinder jacket early tithe break.

Styles APA, Harvard, Vancouver, ISO, etc.

26

Huang, Da Zu, Dan Song, Jian Quan Xie et Rong Liang Xiao. « A Kind of Block Inverse Jacket Transform ». Advanced Engineering Forum 6-7 (septembre 2012) : 704–10. http://dx.doi.org/10.4028/www.scientific.net/aef.6-7.704.

Texte intégral

Résumé :

A novel block inverse Jacket transform is proposed. A cocyclic block inverse Jacket matrix is constructed in which the high-order cocyclic block inverse Jacket matrix can be decomposed into the low-order sparse cocyclic block inverse Jacket matrices with a successive block architecture , instead of the conventional block inverse Jacket matrix(BIJM). It is a fast algorithm by using recursive mode that leads to reducing computational load.

Styles APA, Harvard, Vancouver, ISO, etc.

27

Sohn, Jae-Min, Sojung Lee et Dong-Eun Kim. « An exploratory study of fit and size issues with mass customized men's jackets using 3D body scan and virtual try-on technology ». Textile Research Journal 90, n^o 17-18 (6 février 2020) : 1906–30. http://dx.doi.org/10.1177/0040517520904927.

Texte intégral

Résumé :

The purpose of this study was to explore the potential for mass customization with fit and size issues using 3D technology in men's jacket development. The study tested a fit mass customization process that employed 3D body scanning and 3D virtual simulation technology and the results are summarized as follows. First, the fit evaluation for the final virtual jacket was improved from the first virtual jacket. Second, during the virtual jacket evaluation process, the participants made various requests to change the fit of their virtual jacket. The large-size group made more requests for alterations to their virtual jackets than the medium- and small-size groups. Third, the study underlines certain improvements needed before the technology can be used for apparel mass customization. The chest circumference, back width, and sleeve length of the real jacket each tended to be slightly tighter or shorter than that of the virtual jacket. Fourth, the study suggests that the jacket made from the mass customization process was satisfactory to potential male consumers, as the actual jacket from the mass customization scenario in this study was evaluated as being better than a ready-to-wear jacket. 3D technology is identified as an innovative tool for future tailors and the menswear industry, particularly aimed at young male consumers. The current study shows the potential for the use of this technology for menswear development.

Styles APA, Harvard, Vancouver, ISO, etc.

28

Suwondo, Edy Warsopurnomo et Ahmad Muchlisin. « FAKTOR-FAKTOR PENYEBAB RETAKNYA JACKET COOLING DI CYLINDER MAIN ENGINE MT. SEI PAKNING ». Dinamika Bahari 8, n^o 2 (31 mai 2018) : 2029–44. http://dx.doi.org/10.46484/db.v8i2.74.

Texte intégral

Résumé :

Jacket cooling sebagai selimut cylinder liner dan cylinder cover yang didalamnyaberupa air pendingin (air tawar) dengan temperatur tertentu yang digunakan untukmenyerap panas yang dihasilkan oleh pembakaran bahan bakar di dalam silinder. Faktoryang mempengaruhi keretakan jacket cooling main engine di bagian cylinder cover sebagaiberikut: (a) Pemasangannya (instal), (b) Usia dari material (running hours), (c) Temperaturdan tekanan air pendingin, (d) Perawatan (maintenance), (e) Kualitas air pendingin, (f)Kebocoran pada seal jacket yang sudah diketahui tetapi tidak dilakukan tindakanpenanganan (leakage). Faktor-faktor dari Kekuatan (Strength), Kelemahan (Weakness), Peluang(Opportunities) dan Ancaman (Threats) maka akan dapat dilihat bagaimana solusi untukmengatasi faktor-faktor yang menyebabkan keretakan pada jacket cooling. Analisis SWOTdapat diterapkan dengan cara menganalisis dan memilah berbagai hal yang mempengaruhikeempat faktornya, kemudian menerapkannya dalam gambar matrik SWOT, dimanaaplikasinya adalah bagaimana kekuatan (strength) mampu mengambil keuntungan(advantage) dari peluang (opportunities) yang ada, bagaimana cara mengatasi kelemahan(weaknesses) yang mencegah keuntungan (advantage) dari peluang (opportunities) yang ada,selanjutnya bagaimana kekuatan (strengths) mampu menghadapi ancaman (threats) yangada, dan terakhir adalah bagaimana cara mengatasi kelemahan (weaknesses) yang mampumembuat ancaman (threats) menjadi nyata atau menciptakan sebuah ancaman baru. Hasil penelitian diketahui bahwa faktor keretakan terjadi karena kurangnya perawatanserta usia material jacket cooling yang sudah melampaui batas jam kerja dan jugapenyetelan temperatur jacket cooling yang tidak stabil. Sebagai mantel pendingin mesininduk jacket cooling sangat berperan dalam menjaga temperatur untuk meningkatkan kinerjadari permesinan tersebut. Keadaan keretakan jacket cooling mengakibatkan pelayarantertunda. Peneliti menyimpulkan bahwa keretakan atau pecahnya jacket cooling dapat terjadikarena usia dari material yang sudah melampaui batas jam kerja dan tidak stabilnyatemperatur air pendingin. Untuk mengatasi keretakan pada jacket cooling di cylinder covermesin induk, sebaiknya dilakukan penyetelan temperatur secara bertahap, melakukanpengetesan kadar keasaman air pendingin dan melakukan pengecekan ataupun penggantianterhadap material (jacket cooling) ketika sudah mendekati batas jam kerja yaitu 8000 jam dicylinder cover dan 16000 jam di cylinder liner agar penyebab masalah yang mengakibatkankeretakan jacket cooling di cylinder cover mesin induk teratasi. Melakukan upaya untukmenjadikan temperatur air jacket cooling main engine menjadi lebih normal dapat dilakukandengan selalu melakukan perawatan pada central cooler, membersihkan plat-plat dari sisiair laut maupun air tawar, melakukan sirkulasi chemical (powder descaler) secara berkala,membersihkan plat-plat di fresh water jacket cooler (FWJC).

Styles APA, Harvard, Vancouver, ISO, etc.

29

Sumarno P.S., Dwi Prasetyo et Saiful Hadi Prasetyo. « IDENTIFIKASI PENYEBAB KERUSAKAN SEAL CARGO PUMP DALAM PROSES DISCHARGING MUATAN KIMIA CAIR ». Dinamika Bahari 8, n^o 2 (31 mai 2018) : 2045–62. http://dx.doi.org/10.46484/db.v8i2.75.

Texte intégral

Résumé :

Jacket cooling sebagai selimut cylinder liner dan cylinder cover yang didalamnyaberupa air pendingin (air tawar) dengan temperatur tertentu yang digunakan untukmenyerap panas yang dihasilkan oleh pembakaran bahan bakar di dalam silinder. Faktoryang mempengaruhi keretakan jacket cooling main engine di bagian cylinder cover sebagaiberikut: (a) Pemasangannya (instal), (b) Usia dari material (running hours), (c) Temperaturdan tekanan air pendingin, (d) Perawatan (maintenance), (e) Kualitas air pendingin, (f)Kebocoran pada seal jacket yang sudah diketahui tetapi tidak dilakukan tindakanpenanganan (leakage).Faktor-faktor dari Kekuatan (Strength), Kelemahan (Weakness), Peluang(Opportunities) dan Ancaman (Threats) maka akan dapat dilihat bagaimana solusi untukmengatasi faktor-faktor yang menyebabkan keretakan pada jacket cooling. Analisis SWOTdapat diterapkan dengan cara menganalisis dan memilah berbagai hal yang mempengaruhikeempat faktornya, kemudian menerapkannya dalam gambar matrik SWOT, dimanaaplikasinya adalah bagaimana kekuatan (strength) mampu mengambil keuntungan(advantage) dari peluang (opportunities) yang ada, bagaimana cara mengatasi kelemahan(weaknesses) yang mencegah keuntungan (advantage) dari peluang (opportunities) yang ada,selanjutnya bagaimana kekuatan (strengths) mampu menghadapi ancaman (threats) yangada, dan terakhir adalah bagaimana cara mengatasi kelemahan (weaknesses) yang mampumembuat ancaman (threats) menjadi nyata atau menciptakan sebuah ancaman baru.Hasil penelitian diketahui bahwa faktor keretakan terjadi karena kurangnya perawatanserta usia material jacket cooling yang sudah melampaui batas jam kerja dan jugapenyetelan temperatur jacket cooling yang tidak stabil. Sebagai mantel pendingin mesininduk jacket cooling sangat berperan dalam menjaga temperatur untuk meningkatkan kinerjadari permesinan tersebut. Keadaan keretakan jacket cooling mengakibatkan pelayarantertunda.Peneliti menyimpulkan bahwa keretakan atau pecahnya jacket cooling dapat terjadikarena usia dari material yang sudah melampaui batas jam kerja dan tidak stabilnyatemperatur air pendingin. Untuk mengatasi keretakan pada jacket cooling di cylinder covermesin induk, sebaiknya dilakukan penyetelan temperatur secara bertahap, melakukanpengetesan kadar keasaman air pendingin dan melakukan pengecekan ataupun penggantianterhadap material (jacket cooling) ketika sudah mendekati batas jam kerja yaitu 8000 jam dicylinder cover dan 16000 jam di cylinder liner agar penyebab masalah yang mengakibatkankeretakan jacket cooling di cylinder cover mesin induk teratasi. Melakukan upaya untukmenjadikan temperatur air jacket cooling main engine menjadi lebih normal dapat dilakukandengan selalu melakukan perawatan pada central cooler, membersihkan plat-plat dari sisiair laut maupun air tawar, melakukan sirkulasi chemical (powder descaler) secara berkala,membersihkan plat-plat di fresh water jacket cooler (FWJC).

Styles APA, Harvard, Vancouver, ISO, etc.

30

Abdullah, M. A., M. K. A Rahim, N. A. Samsuri et K. Kamardin. « On-Body Transmission Single-Band Diamond Dipole Antenna with Waveguide Jacket ». Indonesian Journal of Electrical Engineering and Computer Science 10, n^o 3 (1 juin 2018) : 1212. http://dx.doi.org/10.11591/ijeecs.v10.i3.pp1212-1220.

Texte intégral

Résumé :

This paper presents the investigation of on-body transmission single-band diamond dipole antenna with three different jackets. The jackets are named as normal jacket, grounding jacket and waveguide jacket. The on-body transmission is measured using two flexible single-band antennas attach to the jackets. A man with the height of 180 cm and 75 kg weight becomes as a model for the real measurement. The measurement is conducted in small space area by using portable network analyzer with flexible network cable. The measurement results show that the best performance for on-body transmission is with waveguide jacket. 10 dB transmission improvement is archived when the antenna is placed above the waveguide jacket compared to the normal jacket. It is found that the transmission of the antenna is also depends on the antenna orientation and further transmission lossess occur when the antennas are placed above the grounding jacket.

Styles APA, Harvard, Vancouver, ISO, etc.

31

Zhang, Bo, Ping Zhang, Zhao Zhang, Shaobo Yang, Chengli Wang et Fanming Zeng. « Numerical Simulation of Flow Field Characteristics of The Cooling Water Jacket of A Marine Diesel Engine ». E3S Web of Conferences 261 (2021) : 02040. http://dx.doi.org/10.1051/e3sconf/202126102040.

Texte intégral

Résumé :

In order to evaluate the flow field characteristics of a marine diesel engine cooling water jacket, and provide a theoretical basis for further optimizing the water jacket structure. A computational fluid dynamics (CFD) method was used to calculate the three-dimensional flow field of the water jacket. Based on the CFD simulation model of the engine water jacket, the analysis of pressure field, velocity field, streamline distribution and flow uniformity of water jacket of diesel engine under rated condition were carried out. The results show that: the total pressure loss of water jacket is 30.3 kPa, in which the pressure loss of cylinder block is 8.4 kPa, and the one of cylinder head and outlet manifold is 21.9 kPa, which indicates that the flow resistance design of the cylinder block and head is reasonable; the flow rate of coolant in the nose zone of cylinder head is above 1.5 m/s, which meets the cooling demand of cylinder head; the cooling water flows circumferentially in the engine block water jacket, and the flow dead zones are easily formed by the mutual extrusion and collision of the water flows; the outlet of the cylinder head water jacket is connected with the outlet manifold at right angle, which leads to large energy loss of the flow field; the maximum non-uniformity of flow rate of water jacket of each cylinder is 5.85%, which can be further optimized by adjusting the position of water jacket inlet.

Styles APA, Harvard, Vancouver, ISO, etc.

32

Atifah, Nailul, Bambang Herlambang, Edi Tri Astuti, Yayan Mulyana et Perdamean Sebayang. « ANALISIS PERPINDAHAN PANAS PADA WATER JACKET DI RUANG BAKAR PRIMER INCINERATOR SAMPAH KOTA ». Jurnal Teknik Mesin Cakram 3, n^o 2 (30 octobre 2020) : 63. http://dx.doi.org/10.32493/jtc.v3i2.7519.

Texte intégral

Résumé :

Telah dilakukan penelitian mengenai analisis perpindahan panas pada water jacket di ruang bakar primer incinerator sampah kota. Analisis perpindahan panas dilakukan ketika water jacket berada dari fase cair hingga mencapai titik didihnya, yaitu 100 oC, Suhu api pembakaran diasumsikan seragam berdasarkan hasil pengukuran api ruang bakar diperoleh nilai stabil yakni 1097 oC. Variasi debit aliran water jacket adalah 300, 400, 500, dan 600 liter/jam. Tujuan penelitian ini adalah untuk mengetahui bagaimana kenaikan suhu dan karakteristik perpindahan panas pada water jacket dan pengaruh variasi debit terhadap kenaikan suhu water jacket di sepanjang ketinggian dinding ruang bakar. Penelitian dilakukan dengan melakukan perhitungan parameter termohidrolika yang merupakan fungsi suhu yang meliputi densitas, viskositas, konduktivitas, dan bilangan Prandtl. Kemudian, dilanjutkan dengan melakukan perhitungan bilangan Reynolds, Nusselt, koefisien perpindahan panas konveksi, Log Mean Temperature Difference (LMTD), resistensi termal total, dan laju perpindahan panas di sepanjang tinggi cerobong (L) sampai suhu air mencapai 100 oC. Perhitungan tersebut dilakukan dengan metode Euler. Dari hasil perhitungan perpindahan panas diketahui bahwa suhu water jacket di sepanjang ketinggian dinding ruang bakar mengalami kenaikan hingga mencapai titik didihnya. Akan tetapi, ketika aliran water jacket semakin mencapai ke atas, gradien kenaikan suhunya mengalami penurunan nilai. Dengan demikian, laju perpindahan panasnya juga ikut mengalami penurunan. Dari variasi debit diperoleh hasil bahwa semakin besar debit aliran water jacket, kenaikan suhu yang dialami water jacket di sepanjang ketinggian ruang bakar juga semakin kecil. Dengan demikian semakin besar debit aliran water jacket, lintasan yang dibutuhkan untuk mencapai titik didihnya juga semakin panjang. Semakin besar debit aliran water jacket, maka laju perpindahan panas di posisi aliran yang sama juga semakin besar.

Styles APA, Harvard, Vancouver, ISO, etc.

33

Gao, Jin, Wei Zhu, Xian Zhou et Xiao Gang Li. « Effect of Polyethylene Jacket on Swelling Behavior and Mechanical Properties of PVA Hydrogel Nucleus Pulposus Prosthesis ». Advanced Materials Research 287-290 (juillet 2011) : 2042–45. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.2042.

Texte intégral

Résumé :

New prosthetic nucleus which consisted of ultrahigh molecular weight polyethylene (UHMWPE) jacket and polyvinyl alcohol (PVA) hydrogel core was prepared and studied. The hydrogels with similar size were encased in polyethylene jacket of different dimension. Studies indicate that with the decrease of jacket dimension, swelling time of prosthetic nucleus increases, the equilibrium water content and volume change ratio decrease. Differential Scanning Caborimetry (DSC) analysis shows that increasing the jacket dimension results in a slight increase of non-freezable bond water and significant increase in free water. The prosthetic nucleus with larger jacket has better stress relaxation property due to the plasticization of non-freezable water. These results suggest that the dimension ratio of jacket to core at 1.19-1.35 is the most suitable for artificial nucleus pulposus

Styles APA, Harvard, Vancouver, ISO, etc.

34

Underwood, John H., et Anthony P. Parker. « Stress and Fracture Analysis of Ceramic Lined, Composite or Steel Jacketed Pressure Vessels ». Journal of Pressure Vessel Technology 126, n^o 4 (1 novembre 2004) : 485–88. http://dx.doi.org/10.1115/1.1811109.

Texte intégral

Résumé :

Stress and fracture analysis of ceramic-lined cannon pressure vessels is described, for a Si3N4 or SiC liner and A723 steel or carbon-epoxy jacket and with an initial residual interface pressure between liner and jacket and pressure applied to the bore. Room temperature stresses for a steel jacket over ceramic are similar to those for a carbon-epoxy jacket, but both radial and hoop jacket stresses can exceed typical carbon-epoxy strength values. Elevated temperature liner stresses are reduced for a carbon-epoxy jacket, due to the effective increase in interface pressure caused by differential thermal expansion. Critical crack sizes for brittle fracture are generally very small, albeit larger for Si3N4 than SiC due to lower liner stresses and higher fracture toughness for Si3N4.

Styles APA, Harvard, Vancouver, ISO, etc.

35

Rhodes, C. J., R. P. D. Atkinson, R. M. Anderson et D. W. Macdonald. « Rabies in Zimbabwe : reservoir dogs and the implications for disease control ». Philosophical Transactions of the Royal Society of London. Series B : Biological Sciences 353, n^o 1371 (29 juin 1998) : 999–1010. http://dx.doi.org/10.1098/rstb.1998.0263.

Texte intégral

Résumé :

Using detailed field study observations of the side–striped jackal ( Canis adustus ) and a simple stochastic model of the transmission dynamics of the virus and host demography, we discuss the epidemiology of rabies virus infection in the jackal population of Zimbabwe. Of the two jackal species in Zimbabwe, the other being the black–backed jackal ( Canis mesomelas ), the bulk of notified rabies cases are in side–striped jackals. Specifically, we show that the side–striped jackal population itself does not seem able to support rabies infection endemically, i.e. without frequent reintroduction from outside sources of infection. We argue that this is probably because the overall average jackal population density is too low to maintain the chain of infection. This study suggests that the disease is regularly introduced to jackals by rabid dogs from populations associated with human settlements. Given the rapidly rising dog population in Zimbabwe, estimates are derived of the future incidence of jackal rabies based on different dog vaccination scenarios.

Styles APA, Harvard, Vancouver, ISO, etc.

36

Brade, Carly, Brian Dawson, Karen Wallman et Ted Polglaze. « Postexercise Cooling Rates in 2 Cooling Jackets ». Journal of Athletic Training 45, n^o 2 (1 mars 2010) : 164–69. http://dx.doi.org/10.4085/1062-6050-45.2.164.

Texte intégral

Résumé :

Abstract Context: Cooling jackets are a common method for removing stored heat accumulated during exercise. To date, the efficiency and practicality of different types of cooling jackets have received minimal investigation. Objective: To examine whether a cooling jacket containing a phase-change material (PC17) results in more rapid postexercise cooling than a gel cooling jacket and a no-jacket (control) condition. Design: Randomized, counterbalanced design with 3 experimental conditions. Setting: Participants exercised at 75% V˙o2max workload in a hot climate chamber (temperature = 35.0 ± 1.4°C, relative humidity = 52 ± 4%) for 30 minutes, followed by postexercise cooling for 30 minutes in cool laboratory conditions (ambient temperature = 24.9 ± 1.8°C, relative humidity = 39% ± 10%). Patients or Other Participants: Twelve physically active men (age = 21.3 ± 1.1 years, height = 182.7 ± 7.1 cm, body mass = 76.2 ± 9.5 kg, sum of 6 skinfolds = 50.5 ± 6.9 mm, body surface area = 1.98 ± 0.14 m2, V˙o2max = 49.0 ± 7.0 mL·kg−1·min−1) participated. Intervention(s): Three experimental conditions, consisting of a PC17 jacket, a gel jacket, and no jacket. Main Outcome Measure(s): Core temperature (TC), mean skin temperature (TSk), and TC cooling rate (°C/min). Results: Mean peak TC postexercise was 38.49 ± 0.42°C, 38.57 ± 0.41°C, and 38.55 ± 0.40°C for the PC17 jacket, gel jacket, and control conditions, respectively. No differences were observed in peak TC cooling rates among the PC17 jacket (0.038 ± 0.007°C/min), gel jacket (0.040 ± 0.009°C/min), and control (0.034 ± 0.010°C/min, P > .05) conditions. Between trials, no differences were calculated for mean TSk cooling. Conclusions: Similar cooling rates for all 3 conditions indicate that there is no benefit associated with wearing the PC17 or gel jacket.

Styles APA, Harvard, Vancouver, ISO, etc.

37

Liu, Chuan Bo, et Cheng Zhang. « CFD Analysis of Engine Water Jacket and it’s Optimization ». Advanced Materials Research 308-310 (août 2011) : 2308–12. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.2308.

Texte intégral

Résumé :

In order to research the cooling performance of engine water jacket, the CFD method and the software Fluent were used to analyze and optimize the capability. After building and meshing the three-dimensional jacket model, the coolant flow distribution and heat transfer coefficient distribution in jacket were obtained by simulating, and the deviation between simulation results and experimental data dose not exceed 5.3%. The current imbalance problem of heat transfer in water jacket was studied, and an optimization scheme was proposed according to the analysis of flow distribution in each cylinder water hole. The result of optimization program analysis and comparison indicates that the water jacket cooling performance has been significantly increased, the overall structure of water jacket is more reasonable, and these make engine get better cooling.

Styles APA, Harvard, Vancouver, ISO, etc.

38

Yan, Qing Zhi, Zhan Zhang, Liang Cui et Yan Hua Wang. « Study on Reliability of Jacket Offshore Platform by Seismic Action Based on ANSYS ». Advanced Materials Research 163-167 (décembre 2010) : 3023–28. http://dx.doi.org/10.4028/www.scientific.net/amr.163-167.3023.

Texte intégral

Résumé :

Jacket Offshore Platform is a complex statically indeterminate structure, reliability of which is impacted by many factors, and the earthquake is a main factor. This paper simplify the significant failure mode of Jacket Offshore Platform by standard. Calculate the reliability of Jacket Offshore Platform under the effect of earthquake with the Monte Carlo method based on ANSYS. The result can provide evidence for safety assessment of Jacket Offshore Platform.

Styles APA, Harvard, Vancouver, ISO, etc.

39

Park, Chan-Bae, Jun-Ho Lee et Byung-Song Lee. « A Study on the Water-cooling Jacket Design of IPMSM for Railway Vehicles ». Transactions of The Korean Institute of Electrical Engineers 62, n^o 10 (1 octobre 2013) : 1475–80. http://dx.doi.org/10.5370/kiee.2013.62.10.1475.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Yang, Jae-Seung, Jeong-Su Kim et Moon-Ho Lee. « Pseudo Jacket Matrix and Its MIMO SVD Channel ». Journal of The Institute of Internet, Broadcasting and Communication 15, n^o 5 (31 octobre 2015) : 39–49. http://dx.doi.org/10.7236/jiibc.2015.15.5.39.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

41

Anand, Dr (Prof) Noopur, Nishant Priya et Shahzad Ahmad. « A Self Defense Wearable - Anti - Molestation Jacket ». International Journal of Scientific Research 3, n^o 7 (1 juin 2012) : 218–20. http://dx.doi.org/10.15373/22778179/july2014/68.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

42

Park, Ju Yong, Jeong Su Kim, Ference Szollosi et Moon Ho Lee. « 3/5-Modular Hadamard-Jacket Symmetric Matrices ». Journal of the Institute of Electronics Engineers of Korea 50, n^o 5 (25 mai 2013) : 9–17. http://dx.doi.org/10.5573/ieek.2013.50.5.009.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

43

Khan, Khursid A., Jamal A. Khan et Narendra Mohan. « Winter food habits of the Golden Jackal Canis aureus (Mammalia : Carnivora : Canidae) in Patna Bird Sanctuary, Uttar Pradesh, India ». Journal of Threatened Taxa 9, n^o 9 (26 septembre 2017) : 10656. http://dx.doi.org/10.11609/jott.3301.9.9.10656-10661.

Texte intégral

Résumé :

Golden Jackal (Canis aurius indicus) survives in a wide range of environment. Its foraging adaptation varies according to quality and abundance of food sources. The food habits also fluctuate according to season and habitat. This study investigated the diet composition of Golden Jackal using scat analysis method collected between November 2012 and April 2013 from Patna Bird Sanctuary (PBS), Uttar Pradesh, India. A total of 83 scats of Golden Jackal were collected and analysed. Sixteen food items were identified in Golden Jackal scats. Birds contributed maximum (ca. 38.92%) in Golden Jackal diet followed by rodents (ca. 12.14%), insects (ca. 8.92%), reptile (ca. 8.57%), vegetative matter (ca. 13.56%), rufous-tailed hare (ca. 6.07%), cattle (ca. 2.5%), squirrel (ca.1.42%), nilgai (ca.1.07%) and common palm civet (ca. 0.71 %). However (ca. 6.07 %) of prey items could not identified in Golden Jackal scats. Out of (ca. 38.92%) in bird’s contribution egret alone contributed about (ca.20.35%) in Golden Jackal diet followed by gargeny (ca. 8.93%), greater caucal (ca. 5.71%), babbler (ca.1.07%) and (ca. 2.85%) remains of birds were could not identified as per species level. This study is conducted to find out food habits of Golden Jackal and its impact on bird community structure.

Styles APA, Harvard, Vancouver, ISO, etc.

44

Zhu, Jian Sheng, Zhi Fan et Bin Gao. « Influences of Material Parameters on Terminal Effect of PELE with Tungsten Fiber Composite Jacket ». Advanced Materials Research 936 (juin 2014) : 1927–32. http://dx.doi.org/10.4028/www.scientific.net/amr.936.1927.

Texte intégral

Résumé :

There are a series of disadvantages in tungsten alloy (TA), which is adopted as the jacket of PELE widely at present, such as inadequate obdurability, uncontrollable shape and amount of fragments, imperfect lateral damage effect, and so on. To solve the problem, tungsten fiber composite (TFC) is brought forward to produce PELE jacket. In order to verify its feasibility, numerical simulations are carried out on PELE impacting armor steel target with TFC jacket. The simulation results are compared with that of PELE with TA jacket and the reasons that the penetrating performance and lateral damage effect of PELE with TFC jacket being superior is discussed. After that, the function mechanism of PELE with TFC jacket is investigated through analyzing the influences of some factors on impacting behavior of PELE projectiles. These results can provide reliable theory and computational bases for future research.

Styles APA, Harvard, Vancouver, ISO, etc.

45

Kim, KyoungOk, Sho Sonehara et Masayuki Takatera. « Quantifying the appearance of jackets with adhesive interlinings ». International Journal of Clothing Science and Technology 28, n^o 1 (7 mars 2016) : 18–35. http://dx.doi.org/10.1108/ijcst-12-2014-0141.

Texte intégral

Résumé :

Purpose – The purpose of this paper is to quantitatively evaluate the effect of adhesive interlining on the appearance of tailored jackets with different rigidity. Design/methodology/approach – Four tailored jackets having the same pattern and fabric and three different adhesive interlinings or no adhesive interlining were prepared as experimental samples. Criteria and characteristics for assessing jacket appearance were investigated in sensory tests. A paired comparison of the jacket appearance was conducted using a ranking method. Smoothness and constriction values were proposed and obtained using three-dimensional shape data. The smoothness value refers to the degree of wrinkling on the jacket surface and the constriction value refers to the degree of constriction of the waistline. A quantitative assessment model of jacket appearance was proposed using multiple regression analysis. Findings – The sensory test reveals that the number of wrinkles, acceptability of wrinkling and degree of constriction of the waist are important criteria in the assessment of jacket appearance. The smoothness value for the front body and the constriction value of the waist partially agreed with the normal scores of sensory test results. Sensory evaluation values for the entire jacket appearance were estimated employing multiple regression analysis with the constriction and smoothness values. The values of jacket appearance estimated using multiple regression analysis were in good agreement with the sensory test results. Originality/value – Criteria and characteristics to be used in the assessment of the appearance of a jacket with adhesive interlining were clarified. Employing the proposed methodology, it is possible to predict jacket appearance for different adhesive interlinings, quantitatively.

Styles APA, Harvard, Vancouver, ISO, etc.

46

Ratjen, F., R. Zinman et M. E. Wohl. « A new technique to demonstrate flow limitation in partial expiratory flow-volume curves in infants ». Journal of Applied Physiology 67, n^o 4 (1 octobre 1989) : 1662–69. http://dx.doi.org/10.1152/jappl.1989.67.4.1662.

Texte intégral

Résumé :

Partial expiratory flow-volume (PEFV) curves in infants are generated by applying a compressive pressure over the chest wall with an inflatable jacket. This study addresses two issues: pressure transmission to and across the chest wall and whether flow limitation can be identified. Eleven infants sedated with chloral hydrate were studied. Pressure transmission to the chest wall, measured with neonatal blood pressure cuffs placed on the infant's body surface, was 72 +/- 4% of jacket pressure during compression maneuvers. The pressure transmission to the air spaces, determined by measuring airway pressure during a compression maneuver against an occluded airway, was 56 +/- 6% of jacket pressure. A significant amount of the applied pressure is therefore lost across both the jacket and chest wall. Rapid pressure oscillations (RPO) were superimposed on static jacket pressures while expiratory flow was measured. Absence of associated oscillations of flow measured at the mouth was taken to indicate that flow was independent of driving pressure and therefore limited. Flow limitation was demonstrable with the RPO technique in all infants for jacket pressures greater than 50 cmH2O; however, it was evident at jacket pressures less than 30 cmH2O jacket pressure in four infants with obstructive airway disease. The RPO technique is a useful adjunct to the compression maneuver utilized to generate PEFV curves in infants because it facilitates the recognition of expiratory flow limitation.

Styles APA, Harvard, Vancouver, ISO, etc.

47

Ningsih, Juwita R., Retno Asih et Rizky M. K. Putri. « Composite Resin Crown Restoration on Microdontia Maxillary Lateralis Incisor (Case Report) ». Journal of Medicine and Health 3, n^o 1 (27 février 2021) : 61–72. http://dx.doi.org/10.28932/jmh.v3i1.3130.

Texte intégral

Résumé :

Microdontia is a tooth size disorder that is smaller than normal teeth. It can cause diastemawith the adjacent tooth. This condition can interfere with the patient’s self-confidence. One of thetreatment choices for microdontia is jacket crown restoration. It provides an ideal anatomicalshape so that fulfills the aesthetic function of the teeth. The current case report aims to describethe treatment of microdontia maxillary right lateral incisors. A composite resin jacket crown waschosen for the treatment. The work steps are included preparation of the crown, impression forthe working model, color matching of the jacket crown, try-in, and insertion of the compositeresin jacket crown. Subjective and objective evaluation a week post cementation showed that thejacket crown treatment, in this case, was successfully done. In conclusion, composite resin jacketcrown restoration on microdontic maxillary lateral incisors using indirect restorations in theform of composite resin jacket crowns showed good results. Keywords: composite resin; jacket crown; microdontia; tooth anomaly

Styles APA, Harvard, Vancouver, ISO, etc.

48

Cottrell, R. C. « JACNE ». Nutrition Bulletin 10, n^o 3 (septembre 1985) : 127–28. http://dx.doi.org/10.1111/j.1467-3010.1985.tb01197.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

49

Monobe, Ai, KyoungOk Kim et Masayuki Takatera. « Effect of the difference between body dimensions and jacket measurements on the appearance of a ready-made tailored jacket ». International Journal of Clothing Science and Technology 29, n^o 5 (4 septembre 2017) : 627–45. http://dx.doi.org/10.1108/ijcst-02-2017-0015.

Texte intégral

Résumé :

Purpose The purpose of this paper is to clarify changes in the appearance of a ready-made tailored jacket due to changes in the ease allowance and determine suitable ranges of the ease allowance for the jacket. Design/methodology/approach Images were taken of the front, side and back of a jacket placed on a dress form with varying sizes of bust, waist and hips. The authors observed the appearance of the jacket for the different sizes of the dress form. A sensory evaluation of the suitable range of ease allowance for the jacket involving 20 female Japanese university students was carried out. The evaluation items were the fit, beauty, comfort and purchase intention. Findings The jacket appearance was lowly evaluated if there were many wrinkles and highly evaluated if there was a curved silhouette. Changes in bust, sleeve and waist parts affected the evaluation of the suitable ranges of ease allowance. The suitable range of ease allowance varied depending on the jacket part and viewing direction. In terms of fit, the suitable ease allowance ranged between 5.6 and 9.9 percent for the bust, between 7.6 and 17.8 percent for the waist and between 2.6 and 8.6 percent for the hips. The suitable ranges were determined considering the wrinkling and silhouette in these parts. Originality/value Suitable ranges of ease allowance of a tailored jacket were determined by evaluating a jacket for 11 dress form sizes of the bust, nine sizes of the waist and seven sizes of the hips, at 2 cm intervals. The obtained suitable ease allowance ranges are useful to manufacturers in terms of garment design and to customers in terms of selecting suitable garments.

Styles APA, Harvard, Vancouver, ISO, etc.

50

Shen, Zhao Wei, Wei Liang Jin et Xiao Hong Wang. « Reliability of the Offshore Jacket Platform Based on Load Combination ». Applied Mechanics and Materials 405-408 (septembre 2013) : 1415–19. http://dx.doi.org/10.4028/www.scientific.net/amm.405-408.1415.

Texte intégral

Résumé :

Offshore jacket platforms under complicated and changeful ocean environments are subjected to various stochastic actions such as actions of wave, current, wind, ice, earthquake and their combinations. This paper presented the approach to calibrate of the reliability of the offshore jacket platform, and suggested all kinds of associated load cases. The combination of loads were mainly investigated. As an example, the reliability of offshore jacket platform of QK18-1 in Bohai Bay was verified. The result shows that the reliability of the offshore jacket platform related to 25-year reference period is between 2.7 and 3.39, which is close to the conclusion of some existing researches. This method would be used more widely for the design of offshore jacket platforms.

Styles APA, Harvard, Vancouver, ISO, etc.

Articles de revues sur le sujet « Jacmel »

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres