Se connecter

Bibliographies thématiques / Junction of waveguides

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Junction of waveguides »

Auteur : Grafiati

Publié le 26 janvier 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Junction of waveguides ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Junction of waveguides"

1

Berdnik, Sergey L., Victor A. Katrich, Mikhail V. Nesterenko et Yuriy M. Penkin. « Waveguide T-junctions with resonant coupling between sections of different dimensions ». International Journal of Microwave and Wireless Technologies 9, n^o 5 (23 novembre 2016) : 1059–65. http://dx.doi.org/10.1017/s175907871600129x.

Texte intégral

Résumé :

Electromagnetic characteristics of the E-plane T-junction for two rectangular waveguides using resonant coupling between the waveguide sections were studied by mathematical modeling. The problem of coupling between infinite and semi-infinite rectangular waveguides through a resonant slot in the end-wall of the semi-infinite waveguide in the presence of resonant monopole is solved in a strict electrodynamic formulation. The monopole with variable surface impedance is placed parallel to the narrow walls at an arbitrary position inside the infinite waveguide. The problem is solved analytically by the generalized method of induced electro-magneto-motive forces. Impedance vibrator inclusions with variable electro-physical parameters have been analyzed as control elements for waveguide junctions. To this purpose energy characteristics of the junction in the single-mode regime of the both waveguides, and also in multi-mode regime of the semi-infinite waveguide is investigated. The results may be useful for development of variety antennas and waveguide devices, which involves waveguide junctions.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Pochernyaev, V. N., et N. M. Syvkova. « EXTERNAL PARAMETERS OF THE CONNECTION OF A RECTANGULAR WAVEGUIDE PARTIALLY FILLED OF LINEAR DIELECTRIC WITH A RECTANGULAR WAVEGUIDE PARTIALLY FILLED OF NONLINEAR DIELECTRIC ». Visnyk Universytetu “Ukraina”, n^o 1 (28) 2020 (2020) : 100–105. http://dx.doi.org/10.36994/2707-4110-2020-1-28-09.

Texte intégral

Résumé :

. In the article, the external parameters of the connection of a rectangular waveguide partially filled of linear dielectric with a rectangular waveguide partially filled of a nonlinear dielectric are determined. Knowledge of the external parameters of such a connection ensures the design of devices with open nonlinear elements. Promising microwave paths of radio engineering systems based on rectangular waveguides partially filled of dielectric include a wide variety of active and passive microwave devices. The plane-transverse junction of these waveguides is considered for various geometric dimensions of dielectric plates and their relative permittivity. Such a junction is characterized by reactive conductivity, which is determined through the sum of the reactive conductivities of local fields. The transverse electric field at the junction is represented through the eigenvector function of the geometric surface, which coincides with the cross section of the waveguides. The scattering matrix of the plane-transverse junction is determined through the conductivity of the sections of the two waveguides and the conductivity of the plane-transverse junction. The dependences of the traveling wave coefficient and the modulus of the reflection coefficient on the geometric dimensions of the dielectric plate are plotted taking into account the local fields generated at the plane transverse junction. At the junction of two waveguides, not only changed the geometric dimensions of the dielectric plates along the wide and narrow walls of the waveguide, but also their relative permittivity. In one case, two higher types of waves were taken into account: quasi - H30 and quasi - H12, in the other case - four higher types of waves: quasi - H30, quasi - H12, quasi - E12, quasi - H50. Calculations show that an increase in the number of higher types of waves has practically no effect on the accuracy of calculations. The results obtained indicate the rapid internal convergence of the obtained solutions and the correct choice of the transverse electric eigenvector function of rectangular waveguides partially filled of dielectric as approximate the field on the junction of two waveguides.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Ishibashi, Akira, Tsuyoshi Kasai et Nobuo Sawamura. « Redirection Waveguide having Discrete Translational Symmetry for Photovoltaic Systems with Solar-Cell Units Placed at the Periphery ». Energies 11, n^o 12 (14 décembre 2018) : 3498. http://dx.doi.org/10.3390/en11123498.

Texte intégral

Résumé :

We have investigated a new type of redirection waveguides for concentration solar-cell systems. The solar cell units are to be placed in the peripheral region of the waveguide. The redirection waveguide converts three-dimensionally propagating (3D) photons into 2D photons that propagate in a planar waveguide which serves as the mainstream of the redirection waveguide. In this new type, the cladding layer on one side of the planar waveguide, not being spatially continuous, tangentially touches the core of the planar waveguide which, having an open geometry, is connected, through tributary waveguides, to the bottom plane where the 3D-photons come in vertically. Based on simulations, we have shown not only that good mainstream-to-mainstream propagation of light-wave can be obtained but also that the light propagation from the tributary waveguides to the mainstream is well done. We also have confirmed that light-waves from the tributary waveguides are well merged with those from the mainstream waveguide at the junction of the cores of the mainstream and the tributary waveguides. Light-waves injected from tributary waveguides propagates well in the core of the mainstream waveguide passing those junctions. The light-wave merging can be fulfilled in the waveguide with the discrete translational symmetry. Photons are shown to be well conveyed in the new waveguide losslessly for a distance of ~1 mm. The redirection waveguide is promising for the concentration photovoltaic systems with solar-cell units placed at its periphery.

Styles APA, Harvard, Vancouver, ISO, etc.

4

Koala, Ratmalgre, Ryoma Maru, Kei Iyoda, Li Yi, Masayuki Fujita et Tadao Nagatsuma. « Ultra-Low-Loss and Broadband All-Silicon Dielectric Waveguides for WR-1 Band (0.75–1.1 THz) Modules ». Photonics 9, n^o 8 (24 juillet 2022) : 515. http://dx.doi.org/10.3390/photonics9080515.

Texte intégral

Résumé :

This study presents ultra-low-loss and broadband all-silicon dielectric waveguides for the WR-1 band (0.75–1.1 THz). The waveguides are built in high-resistivity silicon (10 kΩ-cm) and integrated with supportive frames fabricated from the same silicon wafer in a single etch process to achieve a compact design. We pursued low-loss, broadband, substrateless, unclad and effective medium waveguides. Smaller propagation losses of 0.3 dB/cm and 0.1 dB/cm were achieved for the unclad and effective medium waveguides, respectively. The 3 dB bandwidth was not encountered in the frequency range of interest and was as broad as 350 GHz. An unclad waveguide was employed to devise a Y-junction to demonstrate its practical applications in terahertz imaging. An integrated circuit card was successfully scanned. In addition, we developed unclad waveguide, effective medium waveguide, and Y-junction modules. The modules incorporated an input/output interface compatible with a standard WR-1 flange (254 μm × 127 μm). Unlike the conventional hollow waveguide modules, the unclad waveguide and effective medium waveguide modules reported total loss improvements of 6 dB and 8 dB, respectively, across the operation band. Our results provided a systematic way of achieving low-loss, compact, and versatile modules in the WR-1 band based on all-dielectric-waveguide platforms.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Belubekyan, M. V., et S. L. Sahakyan. « ON THE LOCALIZATION OF SHEAR VIBRATIONS IN A COMPOSITE ELASTIC SEMI-INFINITE FLAT WAVEGUIDE ». Proceedings of the YSU A : Physical and Mathematical Sciences 54, n^o 1 (251) (15 avril 2020) : 44–49. http://dx.doi.org/10.46991/pysu:a/2020.54.1.044.

Texte intégral

Résumé :

In this paper we consider semi-infinite flat waveguides with different boundary conditions on the planes and on the edges that bound the waveguide. The possibility of localizing shear waves in the vicinity of the junction of neighbouring parts of a semi-infinite flat waveguide is established.

Styles APA, Harvard, Vancouver, ISO, etc.

6

D. V. Divakov, K.P. Lovetskiy, A. L. Sevastyanov et A. A. Tiutiunnik. « Adiabatic guided modes of a three-layer integral optical waveguide ». Technical Physics 68, n^o 4 (2023) : 423. http://dx.doi.org/10.21883/tp.2023.04.55931.292-22.

Texte intégral

Résumé :

The numerical solution of the problem of guided propagation of polarized light in a smooth junction of a planar waveguide is considered. Within the framework of the model of adiabatic guided modes, the system of Maxwell equations is reduced to a system of four ordinary differential equations and two algebraic equations for six components of the electromagnetic field in the zeroth approximation and the same number of equations in the first approximation. The multilayer structure of waveguides makes it possible to reduce the problem to a homogeneous system of linear algebraic equations, whose nontrivial solvability condition yields the dispersion equation. Auxiliary eigenvalue problems for describing the adiabatic modes of the waveguide are solved. Keywords: smoothly irregular integrated-optical multilayer waveguides, eigenvalue and eigenvector problems, single-mode propagation of adiabatic waveguide modes.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Eccleston, Kimberley, et Ian Platt. « Identifying Near-Perfect Tunneling in Discrete Metamaterial Loaded Waveguides ». Electronics 8, n^o 1 (11 janvier 2019) : 84. http://dx.doi.org/10.3390/electronics8010084.

Texte intégral

Résumé :

Mu-negative and epsilon-negative loaded waveguides taken on their own are nominally cut-off. In ideal circumstances, and when paired in the correct proportions, tunneling will occur. However, due to losses and constraints imposed by finite-sized constituent elements, the ability to experimentally demonstrate tunneling may be hindered. A tunnel identification method has been developed and demonstrated to reveal tunneling behavior that is otherwise obscured. Using ABCD (voltage-current transmission) matrix formulation, the S-parameters of the mu-negative/epsilon-negative loaded waveguide junction is combined with S-parameters of an epsilon-negative loaded waveguide. The method yields symmetric scattering matrices, which allows the effect of losses to be removed to provide yet clearer identification of tunneling.

Styles APA, Harvard, Vancouver, ISO, etc.

8

Nazarov, S. A., K. Ruotsalainen et P. Uusitalo. « The Y-junction of quantum waveguides ». ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 94, n^o 6 (18 mars 2013) : 477–86. http://dx.doi.org/10.1002/zamm.201200255.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

KIM, JUN-HYONG, HOE-YOUNG YANG et HYUN-YONG LEE. « FABRICATION OF MACH-ZEHNDER INTERFEROMETOR BASED ON PLANAR WAVEGUIDE FOR THE APPLICATION OF BIOSENSORS ». International Journal of Modern Physics B 23, n^o 06n07 (20 mars 2009) : 1891–96. http://dx.doi.org/10.1142/s0217979209061792.

Texte intégral

Résumé :

In this paper, designed and simulated Power Splitter (PS) integrated Mach-Zehnder interferometer (MZI) based planar waveguide devices (which is called here a PS-MZI). Moreover, we fabricated optical waveguide based on the PS-MZI for application to the biosensor. The integrated optical structure is sensitive to refractive index change induced due to the interaction of the evanescent field with an immobilized biological sample placed on one of the two arms of the interferometer. The PS-MZI sensor was preceded by a Y -junction, which splits the input power between the sensor and a reference branch to minimize the effect of optical power variations. The waveguide were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of PS-MZI optical waveguides was performed by a conventional planar lightwave circuit (PLC) fabrication process. The PS-MZI optical waveguides were measured of the optical characteristics for the application of biosensors.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Vu, Ngoc Hai, Thanh Tuan Pham et Seoyong Shin. « Large Scale Spectral Splitting Concentrator Photovoltaic System Based on Double Flat Waveguides ». Energies 13, n^o 9 (9 mai 2020) : 2360. http://dx.doi.org/10.3390/en13092360.

Texte intégral

Résumé :

In this research, we present a novel design for a large scale spectral splitting concentrator photovoltaic system based on double flat waveguides. The sunlight concentrator consists of a Fresnel lens array and double waveguides. Sunlight is firstly concentrated by Fresnel lenses then reaches an upper flat waveguide (UFW). The dichroic mirror-coated prisms are positioned at each focused area to divide the sunlight spectrum into two bands. The mid-energy (mid E) band is reflected at the prism surface and coupled to the UFW. The GaInP/GaAs dual-junction solar cell is attached at the exit port of the UFW to maximize the electrical conversion efficiency of the mid E band. The low-energy (low E) band is transmitted and reaches a bottom flat waveguide (BFW). The mirror coated prisms are utilized to redirect the mid E band sunlight for coupling with the BFW. The GaInAsP/GaInAs dual-junction solar cell is applied to convert the low E band to electricity. The system was modeled using the commercial optic simulation software LightTools™. The results show that the proposed system can achieve optical efficiencies of 84.02% and 80.01% for the mid E band and low E band, respectively, and a 46.1% electrical conversion efficiency for the total system. The simulation of the system performance and comparison with other PV systems prove that our proposed design is a new approach for a highly efficient photovoltaic system.

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Junction of waveguides"

1

Chan, Kin Lung. « Modal analysis of elliptic waveguide junctions ». Thesis, University of Hull, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389728.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Swee-Ping, Yeo. « Characteristics of the symmetrical five-port waveguide junction ». Thesis, University College London (University of London), 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.431178.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Kanellopoulos, Vassilios N. « Vectorial finite element analysis of E-plane waveguide junctions ». Thesis, McGill University, 1987. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=64027.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Froncioni, Andy M. « A new finite element method for analysis of H-plane waveguide junctions / ». Thesis, McGill University, 1988. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63937.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Tong, Cheuk-yu. « Développement d'un récepteur millimétrique à base d'une structure diélectrique incorporant une jonction supraconductrice ». Grenoble 1, 1988. http://www.theses.fr/1988GRE10138.

Texte intégral

Résumé :

Un nouveau recepteur millimetrique a base d'une combinaison integree: guide d'onde dielectrique non-rayonnant (nrd) modifie, a ete concu et teste aux longueurs d'onde de trois et un millimetre le recepteur comporte une jonction sis (supraconducteur-isolant-supraconducteur) ainsi qu'une structure de couplage originale qui couple l'energie du guide nrd a la jonction

Styles APA, Harvard, Vancouver, ISO, etc.

6

Gérard, Philippe. « Méthode modale généralisée pour l'étude de dispositifs d'optique intégrée : application : filtre microondes par voie optique ». Grenoble INPG, 1994. http://www.theses.fr/1994INPG0061.

Texte intégral

Résumé :

Nous proposons une technique numerique originale appelee rsm pour la propagation d'un champ optique dans une structure dielectrique planaire sans pertes et de forme arbitraire. C'est une technique entierement modale dont la base de decomposition des champs est constituee des modes propres locaux guides et rayonnes de la structure. Elle cumule les avantages des diverses bpm mais s'en distingue par le fait qu'elle peut traiter des geometries des guides qui presentent des forts changements de direction, des fortes discontinuites d'indice et des effets de polarisation. Nous demontrons les potentialites de cette methode a l'aide de plusieurs exemples choisis volontairement comme tres demonstratifs des interets de la methode et qui ne peuvent etre correctement traites a l'aide des outils existants. Ce sont: le miroir a reflexion totale et partielle, l'hybridation de photodetecteurs silicium sur un guide realise sur verre cette methode a ete utilisee pour faire une etude systematique des croisements de guides a tous les angles et quelles que soient les conditions de guidage. De plus, nous avons mene une etude des guides courbes realises par echange d'ions sur verre. Ces deux geometries de guides ont ensuite ete utilisees pour la realisation d'un composant d'application. Il s'agit d'un interferometre de mach zehnder asymetrique dont la difference de longueurs entre les deux bras est de 6,6 millimetres. Nous avons demontre que la reponse frequentielle d'un tel dispositif lorsqu'il est eclaire par une lumiere modulee par un signal microondes est celle d'un filtre rejecteur de frequence. Les performances de notre composant sont les suivantes: frequence de rejection 15 ghz, taux de rejection: 15 db optiques et largeur de bande de 700 mhz

Styles APA, Harvard, Vancouver, ISO, etc.

7

Chang, Chun-Huai, et 張峻槐. « Coplanar Waveguide to Slotline T-junction ». Thesis, 1996. http://ndltd.ncl.edu.tw/handle/07432188199755276724.

Texte intégral

Résumé :

碩士
國立臺灣大學
電機工程研究所
84
A simple model is proposed for an analysis of the coplanar waveguide to slotline T-junction. By the quasi-TEM assumption, the original inhomogeneous slotline structure containing the dielectric substrate can be replaced by an equivalent homogeneous one. By regarding the strip current of the coplanar waveguide as the fed current of the slotline, one may obtain the governing integral equation for the aperture field over the slot region of slotline. The Hallen's method is then be used to determine the electric field distribution along the slotline from which the input impedance to the T-junction is established. This study carefully examines the return loss to the T-junction where the sloline is terminated by a load impedance. Good agreement between the experiment and the simulation results is observed and ensures the reliability of the model. In this study, the discontinuity effect of the T- junction is investigated theorectically and experimentally.

Styles APA, Harvard, Vancouver, ISO, etc.

8

DENG, SHENG-MING, et 鄧聖明. « Analysis of H-plane tee-junction rectangular waveguide slot coupler ». Thesis, 1990. http://ndltd.ncl.edu.tw/handle/57952373253395561222.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Cheng, Li-Chung, et 陳俐君. « A Study on Coplanar Waveguide Highpass Filter with T-Junction Structures ». Thesis, 1998. http://ndltd.ncl.edu.tw/handle/05359734964810854420.

Texte intégral

Résumé :

碩士
國立海洋大學
電機工程學系
86
Abstract In the design of highpass filter, the cutoff frequency, the insertion andreturn losses in the passband, and the attenuation slope in the stopband are important parameters to be considered. Moreover, the performances of filters can be improved if the planar structures are used. In this thesis, the conductor- backed coplanar waveguide structures are uesd to design the highpass filter with short circuit stubs and T-junction structures. In this thesis, the theory of the design of highpass filter is analyzed firstly. Next, the symmetrical and asymmetrical coplanar waveguide highpass filters are designed and realized, respectively. Moreover, the effects of T-junction and short-end discontinuity structures are studied and compensatedproperly. Finally, the characteristics of the filters are measured and compared with simulation results.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Wu, Jia-Lun, et 吳嘉倫. « Design of Q-Band Substrate Integrated Waveguide and Microstrip T-junction Diplexer ». Thesis, 2016. http://ndltd.ncl.edu.tw/handle/66391834876188057758.

Texte intégral

Résumé :

碩士
國立交通大學
電信工程研究所
104
The design of Q-Band Substrate Integrated Waveguide (SIW) microstrip T-junction diplexer is presented in this thesis. The SIW inductive-post coupled filter was used as channel filter. The microstrip T-junction is used to implement the diplexer. The advantages of mcicrostrip T-junction diplexer are its simple structure, easy to design, and compact size. In order to improve the isolation of the diplexer, a cross-coupled filter is adopted for the low frequency channel filter. The bandwidths and center frequencies of the diplexer are 6%, 38GHz, and 6%, 42GHz. The transmission zero at upper stopband of the cross-coupled channel filter improves the high side isolation of the diplexer. The design difficulty increases as the channel getting closer because the mutual interference of the channel filters gets worse. The circuits are fabricated with two different substrates. One is the Rogers RT- Duroid 5880TM substrate with thickness of 10 mil and dielectric constant of 2.2 and the other is the Rogers RO4350B substrate with thickness of 10 mil and dielectric constant of 3.48. All of the fabricated circuits are connected to 2.4 mm end launch connector and measured by vector network analyzer.

Styles APA, Harvard, Vancouver, ISO, etc.

Livres sur le sujet "Junction of waveguides"

1

Center, Langley Research, dir. Analysis of waveguide junction discontinuities using finite element method : Contract NAS1-19341. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1997.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Helszajn, J. Waveguide junction circulators : Theory and practice. Chichester : Wiley, 1998.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

1949-, Simons Rainee, et United States. National Aeronautics and Space Administration., dir. Channelized coplanar waveguide : Discontinuities, junctions, and propogation characteristics. [Washington, DC] : National Aeronautics and Space Administration, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

N, Simons R., et Lewis Research Center, dir. Channelized coplanar waveguide pin-diode switches. Cleveland, Ohio : Lewis Research Center, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Law, P. H. A hybrid asymptotic-modal analysis of the EM scattering by an open-ended S-shaped rectangular waveguide cavity. Columbus, Ohio : Ohio State Uniersity, ElectroScience Laboratory, Dept. of Electrical Engineering, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Law, P. H. A hybrid asymptotic-modal analysis of the EM scattering by an open-ended S-shaped rectangular waveguide cavity. Columbus, Ohio : Ohio State Uniersity, ElectroScience Laboratory, Dept. of Electrical Engineering, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Negative Group Delay Devices : From Concepts to Applications. Institution of Engineering & Technology, 2018.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Junction of waveguides"

1

Nesterenko, Mikhail V., Victor A. Katrich, Yuriy M. Penkin et Sergey L. Berdnik. « Stepped Junction of the Two Rectangular Waveguides with the Impedance Slotted Iris ». Dans Analytical and Hybrid Methods in the Theory of Slot-Hole Coupling of Electrodynamic Volumes, 1–24. New York, NY : Springer New York, 2008. http://dx.doi.org/10.1007/978-0-387-76362-0_6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Burns, W. K., et A. F. Milton. « Waveguide Transitions and Junctions ». Dans Springer Series in Electronics and Photonics, 89–144. Berlin, Heidelberg : Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-97074-0_3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Burns, W. K., et A. F. Milton. « Waveguide Transitions and Junctions ». Dans Springer Series in Electronics and Photonics, 89–144. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-75824-9_3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Eom, Hyo J. « Junctions in Parallel-Plate/Rectangular Waveguide ». Dans Wave Scattering Theory, 121–48. Berlin, Heidelberg : Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59487-8_5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Roukes, M. L., T. J. Thornton, A. Scherer, J. A. Simmons, B. P. Van der Gaag et E. D. Beebe. « Electron Waveguide Junctions : Scattering from a Microfabrication-Imposed Potential ». Dans Science and Engineering of One- and Zero-Dimensional Semiconductors, 71–82. Boston, MA : Springer US, 1990. http://dx.doi.org/10.1007/978-1-4684-5733-9_9.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Nesterenko, Mikhail V., Victor A. Katrich, Yuriy M. Penkin, Sergey L. Berdnik et Oleksandr M. Dumin. « T-Junctions of Rectangular Waveguides with Vibrator-Slot Structures in Coupling Areas ». Dans Lecture Notes in Electrical Engineering, 157–89. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60177-5_5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Tsuru, Koji, Kazunori Miyahara et Minoru Suzuki. « Millimeter wave response of Josephson junction arrays using a waveguide to microstrip line converter ». Dans Advances in Superconductivity VIII, 1171–74. Tokyo : Springer Japan, 1996. http://dx.doi.org/10.1007/978-4-431-66871-8_264.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Olyslager, Frank. « Fields Incident On Bitransmission Lines ». Dans Electromagnetic Waveguides and Transmission Lines, 187–95. Oxford University PressOxford, 1999. http://dx.doi.org/10.1093/oso/9780198564508.003.0007.

Texte intégral

Résumé :

Abstract In this chapter, the results of the previous chapter are generalized to general bianisotropic waveguides and junctions. The main difference is that for nonreciprocal waveguides and junctions the ad joint structures are also needed in order to apply the Lorentz reciprocity theorem. It will, however, suffice to know the eigenmodes that propagate in the ad joint waveguide and to know the fields generated in ad joint junctions by incident eigenmodes from adjoint waveguides connected to these junctions. The representation of incident fields by voltage and current sources in the reciprocity-based bitransmission lines of Chapter 5 is straightforward.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Olyslager, Frank. « Fields Incident On Transmission Lines ». Dans Electromagnetic Waveguides and Transmission Lines, 162–86. Oxford University PressOxford, 1999. http://dx.doi.org/10.1093/oso/9780198564508.003.0006.

Texte intégral

Résumé :

Abstract The previous chapters have investigated the propagation of eigenmodes in wave guides and their transmission line representation without considering the excitation of these eigenmodes.45 In this chapter, the excitation of eigenmodes will be studied in detail. The analysis starts with the determination of the eigenmodes excited in a waveguide by external electric and magnetic current densities. This is a generic excitation problem that can be used in many practical situations. The fields generated by these sources will also illuminate junctions of waveguides. This will result in the excitation of eigenmodes in the waveguides connected to these junctions.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Levy, Ralph. « Waveguide Junctions ». Dans Encyclopedia of RF and Microwave Engineering. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2005. http://dx.doi.org/10.1002/0471654507.eme489.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Junction of waveguides"

1

Deng, Jau-Jan, et Yang-Tung Huang. « A Novel Hybrid Coupler Based on Antiresonant Reflecting Optical Waveguides ». Dans The European Conference on Lasers and Electro-Optics. Washington, D.C. : Optica Publishing Group, 1996. http://dx.doi.org/10.1364/cleo_europe.1996.cthi44.

Texte intégral

Résumé :

The beam splitter and the beam combiner are key elements for optical communications, and the optical-waveguide hybrid coupler has been proposed for these functions by Izutsu, et al. [1]. This conventional waveguide hybrid coupler consists of symmetric and nonsymmetric Y-junctions connected directly. In each Y-junction, there are two types of normal modes, even and odd modes, traveling along the propagation direction. For the input symmetric Y-junction, the amplitudes of the field for both modes in two individual waveguides are the same; in the output nonsymmetric Y-junction, the fields of the even and odd modes are mainly confined in the wide- and narrow-arm, respectively. The input conditions will determine the outputs of the wide- and narrow-arm in the nonsymmetric Y-junction. In this presentation, we present a novel hybrid coupler structure based on antiresonant reflecting optical waveguides (ARROWs) to provide the same functions.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Subramanian, P., P. K. A. Wai, C. R. Menyuk et R. J. Hawkins. « Effect of junction rounding on the propagation characteristics of Y-junction waveguides ». Dans OSA Annual Meeting. Washington, D.C. : Optica Publishing Group, 1991. http://dx.doi.org/10.1364/oam.1991.tuii1.

Texte intégral

Résumé :

The beam propagation method1 is used to stimulate the propagation of light through Y junctions. Such structures have been extensively studied in the past, but the effect of junction rounding on the propagation characteristics has not been considered before. For photolithographically patterned, dry etched Y junctions, junction rounding usually leads to the branching point of the junction being 1–20 μm away from the position where it would have been if it were sharp. This work describes the effect of junction rounding on the propagation characteristics of symmetric and asymmetric Y junctions. The total power in each arm and the power in the fundamental mode is plotted as a function of propagation distance for different junction angles, input field distributions, and extents of junction rounding. We find that junction rounding has a surprisingly small effect on the propagation characteristics, so that it will have almost no detrimental impact on the experiments.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Kapon, Eli, et R. N. Thurston. « Multimode branching waveguides for guided-wave optics ». Dans OSA Annual Meeting. Washington, D.C. : Optica Publishing Group, 1987. http://dx.doi.org/10.1364/oam.1987.mb4.

Texte intégral

Résumé :

Waveguide junctions are important for performing splitting and recombining of optical signals for guided-wave optics applications.1 We describe a new class of multichannel waveguide junction which is useful for a variety of guided-wave manipulations. These junctions consist of an m-mode channel waveguide that branches into m single-mode channels, each having a different refractive-index profile. It is shown that each mode of these junctions becomes localized in a different single-mode channel as the channel separation increases. Thus, for sufficiently small branching angles, the junctions can route each mode of the multimode waveguide into a different output channel. When the junctions are excited from their single-mode channels end, they can serve to excite selectively each mode of the multimode waveguide. Furthermore, when both the width and refractive index of the single-mode channels are properly varied across the junction, the mode localization scheme becomes wavelength-dependent. Hence such junctions can operate as wavelength multiplexers/demultiplexers. Finally, by dynamically varying the refractive-index steps of the junction channels, e.g., via the electrooptic effect or optical nonlinearities, the waveguide junctions can perform multiport switching, modulation, and dynamic wavelength multiplexing/demultiplexing of guided waves.

Styles APA, Harvard, Vancouver, ISO, etc.

4

Chi, Sien, et Tian-Tsorng Shi. « TE waves propagating in a nonlinear planar asymmetric converging waveguide Y junction ». Dans Nonlinear Guided-Wave Phenomena. Washington, D.C. : Optica Publishing Group, 1991. http://dx.doi.org/10.1364/nlgwp.1991.me4.

Texte intégral

Résumé :

Recently nonlinear waveguide junctions have been investigated intensively for their interesting switching behaviors1,2. The waves propagating in a nonlinear converging waveguide Y junction in which the two branches and the stem are single mode waveguides are less reported. For a linear case, the field injected into the thinner branch at a distance from the junction will not evolve into the fundamental mode of the stem, and the field injected into the thicker branch will propagate without loss3. Here we simulate the waves propagating in the Y junction with a nonlinear cladding by using beam propagation method4, and we find that the field injected into the thinner branch is possible to transmit to the stem with a high efficiency.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Chu, F. S., P. L. Liu, S. L. Jia et P. J. Cressman. « Simulation and experimental study of Ti:LiNbO3 waveguides ». Dans OSA Annual Meeting. Washington, D.C. : Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oam.1990.thy27.

Texte intégral

Résumé :

A waveguide-simulation program based on the beam-propagation method has been used to study Ti-indiffused LiNbO3 waveguide structures. By modifying the double-moded branching structure of the conventional Y-junction design, the loss of the branching structure can be substantially reduced. For a 1° half-branching angle, the loss can be lowered from –1.2 dB to 0.2 dB. Experimental data confirm that the modified design indeed has a lower loss. In addition to the branching structure, waveguide bends are also needed to complete a Y-junction. Low-loss coherent coupling bends are simulated and measured. From the measured mode profile, the waveguide simulation program is used to obtain the diffusion parameters for the Y-cut, X- or Z-propagating waveguides. The coupling lengths of directional couplers fabricated on such substrates are calculated and compared with experimental measurements. Coupling between adjacent waveguide bends is simulated. Mismatched waveguides, as well as ion milling, are used to decouple adjacent waveguides. Results of simulation are compared with experimental data.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Vawter, G. Allen, James L. Merz et Larry A. Coldren. « Monolithically Integrated Transverse Junction Stripe Lasers with Rib Waveguides in GaAs/AlGaAs ». Dans Integrated and Guided Wave Optics. Washington, D.C. : Optica Publishing Group, 1988. http://dx.doi.org/10.1364/igwo.1988.wb4.

Texte intégral

Résumé :

Complete integration of optical laser sources and waveguides with electronics on a single semiconductor wafer has been a long sought after and elusive goal. Future development of optoelectronic integrated circuits (OEICs) hinges on the development of monolithically integrated laser/waveguide systems with low threshold currents and high injection efficiency into the passive waveguide. This paper reports progress in developing just such a high efficiency Transverse Junction Stripe1 (TJS) laser source integrated with an external passive waveguide suitable for optical interconnection applications. Threshold current as low as 60 mA and injection efficiencies as high as 40% are reported.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Carle, Pierluigi. « Right-Angle Junction for Rectangular Waveguides ». Dans 21st European Microwave Conference, 1991. IEEE, 1991. http://dx.doi.org/10.1109/euma.1991.336385.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Doldissen, W., R. J. Deri, R. J. Hawkins, R. Bhat, J. B. D. Soole, L. M. Schiavone, M. Seto, N. Andreadakis, Y. Silberberg et M. A. Koza. « Efficient vertical coupling of photodiodes to InGaAsP rib waveguides ». Dans Integrated Photonics Research. Washington, D.C. : Optica Publishing Group, 1991. http://dx.doi.org/10.1364/ipr.1991.thf7.

Texte intégral

Résumé :

Monolithic optoelectronics requires optical linkage between waveguides and photodiodes. Vertical coupling offers the advantages of single-step epi-growth and ease of junction placement.1,2 Its drawback is weak coupling, resulting in long detector lengths L and high capacitance. thinner guides can reduce L,1,2 but increase input coupling difficulty. We recently demonstrated than an optical "matching layer' introduced between a thick n-/n^+ InP waveguide and an InGaAs absorber significantly enhances vertical coupling.3 Here we show that this approach provides efficient coupling between InGaAs detectors and InGaAsP waveguides of the type currently employed in photonic integration.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Constantinou, Constantinos C., et Raymund C. Jones. « Tapered graded-index waveguide analysis using path integrals ». Dans OSA Annual Meeting. Washington, D.C. : Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oam.1990.thpp6.

Texte intégral

Résumé :

In many fiber and integrated optical devices one needs either to connect two waveguides of different cross-sections, or to join several waveguides at a single junction. A knowledge of the coupling efficiencies of such a junction is clearly important and depends on our understanding of propagation in tapered waveguide sections. We consider paraxial propagation in the z-direction in a graded index waveguide whose refractive index is given by By suitably choosing the function c(z) we can describe tapers with linear, hyperbolic or parabolic geometries in the xz plane. We have used the Feynman Path integral method1 to obtain exact expressions for the coupling efficiency of such tapers without resorting to approximate numerical techniques. Our closed form analytical results for the coupling efficiencies reveal detailed structure which other methods of analysis do not show. Some recent experimental evidence would indicate support for the results of our calculations.2

Styles APA, Harvard, Vancouver, ISO, etc.

10

Wakayama, Y., T. Kita et H. Yamada. « Low loss junction of Si-wire waveguides and silica based waveguides for a hybrid waveguide photonic integrated circuit ». Dans 2010 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2010. http://dx.doi.org/10.7567/ssdm.2010.p-7-21.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Junction of waveguides"

1

Tau, Cyrus N. Waveguide Junction Analysis Involving Asymmetrical Modes. Fort Belvoir, VA : Defense Technical Information Center, septembre 1986. http://dx.doi.org/10.21236/ada178464.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!