Se connecter

Bibliographies thématiques / Local section / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Local section.

Articles de revues sur le sujet « Local section »

Auteur : Grafiati

Publié le 2 juin 2025

Mis à jour le 31 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Local section ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Palisch, Terry. "President’s Column with Terry Palisch: Creating Our Energy Future (December 2023)." Journal of Petroleum Technology 75, no. 12 (2023): 4–9. http://dx.doi.org/10.2118/1223-0004-jpt.

Texte intégral

Résumé :

_ In this episode and transcript, Terry Palisch is joined by Simeon Eburi, an SPE Regional Director of North America, to discuss connecting members to technology and each other, and the importance of local sections. This transcript is an excerpt from the podcast episode. Listen to the full episode here. Simeon: I’m Simeon Eburi, an SPE Regional Director of North America and reservoir management advisor with Chevron. I’m pleased to join SPE President Terry Palisch to talk about the benefit of joining and being involved with your local SPE section. Thank you for inviting me to join you. As a reg

Styles APA, Harvard, Vancouver, ISO, etc.

2

Ikram Badshah, Zakiya Rubab Mohsin, and Jan Alam. "Local Perception about Caesarian Section among Post Caesarian Section Women in Pakistan." sjesr 4, no. 2 (2021): 299–308. http://dx.doi.org/10.36902/sjesr-vol4-iss2-2021(299-308).

Texte intégral

Résumé :

Birthing is a critical moment in the life of a mother. The biomedical practice of the Caesarian Section (C-section) does not exist in a vacuum but is under the influence of the sociocultural environment. However, deciding between methods of birth and the perception about the C-section shows a gap and dearth in the present literature. This paper aims at understanding what social and cultural factors construct the perceptions and experiences of the Caesarian Section among post-C-section- women belonging to different socio-economic statuses. Moreover, it explores how these factors influence Pakis

Styles APA, Harvard, Vancouver, ISO, etc.

3

Chiêm, Đặng Tứ Quốc, та Hùng Cường Bùi. "Công thức xác định ứng suất ổn định cục bộ của thép tiết diện chữ I chịu nén đều". Vietnam Institute for Building Science and Technology 2024, vi.vol2 (2024): 32–39. http://dx.doi.org/10.59382/j-ibst.2024.vi.vol2-4.

Texte intégral

Résumé :

The I-shaped steel sections should be checked for local buckling conditions during design. When local buckling occurs, there is interaction between thin-walled components of the section. Design codes have provided formulas to determine local critical stress for I-shaped steel sections, but they do not account for this interaction. This paper proposes equations for determining the local ultimate stress of I-shaped sections under axial compression, considering web and flange interaction when ratios between the height and width of the section, the flange thickness and web thickness change. The lo

Styles APA, Harvard, Vancouver, ISO, etc.

4

Johnson, Deborah G., Andrew Light, Paul Thompson, and Albert Borgmann. "Section 3. Local Boundaries." Techné: Research in Philosophy and Technology 24, no. 4 (2020): 28–30. http://dx.doi.org/10.5840/techne2020244132.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Shankar, S., R. Kumar, A. P. Khatri, and L. M. Gupta. "Comparison of Section Classification Procedure of Different Codes." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (2022): 443–47. http://dx.doi.org/10.38208/acp.v1.533.

Texte intégral

Résumé :

The cross-section classification is essential to identify local buckling in steel sections. Local buckling restricts the section from attaining its maximum moment capacity. Cross section classification is based on the behavior of the element under direct and bending compressive stresses. Limit on width to thickness ratio of elements in a cross section is the governing criterion for the section classification in different national codes. In the case of seismic design, the post yield ductility is an important parameter; therefore, it is particularly essential to prevent local buckling. Design co

Styles APA, Harvard, Vancouver, ISO, etc.

6

M. Colansong, Joana. "THE LOCAL HISTORY SECTION OF BAGUIO CITY PUBLIC LIBRARY." International Journal of Advanced Research 12, no. 12 (2024): 1023–51. https://doi.org/10.21474/ijar01/20112.

Texte intégral

Résumé :

The study focused on evaluating the present status of the Local History section within the Baguio City Public Library. It aimed to explore the frequency of utilization, purposes for usage, user satisfaction with the collections, services, and facilities, the importance of the sections materials, and the preferred strategies for improving the Local History section at the Baguio City Public Library.A survey questionnaire was utilized to gather data from individuals who utilized the services provided by the Local History section. The results indicated that the majority of respondents accessed the

Styles APA, Harvard, Vancouver, ISO, etc.

7

Duma, Clifford Mhlanyukwa. "Assessing the Relationship between Councilors, Traditional Leaders and Society in Local Governance in Ubuhlebezwe Local Municipality." Artha Journal of Social Sciences 23, no. 4 (2024): 1–22. https://doi.org/10.12724/ajss.71.1.

Texte intégral

Résumé :

South Africa, with its heterogeneous population, aims to promote the engagement of all citizens in governance. Section 81 of the Local Government: Municipal Structures Act (Act No. 117 of 1998) enables traditional leaders to participate in municipal councils. There has been insufficient research and established models of best practices for implementing Section 81 since the national Act was passed. Sections 152(b) and 153(a) of the 1996 Constitution outline the authorised powers of local government. These sections state that one of the objectives of local government, under council members' lead

Styles APA, Harvard, Vancouver, ISO, etc.

8

Zhang, Junfeng, Bo Li, Anqi Li, and Shiyun Pang. "Critical Stress Determination of Local and Distortional Buckling of Lipped Angle Columns under Axial Compression." Buildings 12, no. 6 (2022): 712. http://dx.doi.org/10.3390/buildings12060712.

Texte intégral

Résumé :

In recent years, cold-formed steel has been widely used in prefabricated steel structures, and the common cross-section forms are mainly complex lipped angle sections. However, there is a lack of design guidance for such a cross-section due to the complex geometric property. The restraint between adjacent plates cannot be considered proper for the traditional analytical method. Therefore, it is particularly important to study the stability bearing capacity of angle sections with complex edges under axial compression. In this paper, the finite strip software (CUFSM5) was used to analyze the cri

Styles APA, Harvard, Vancouver, ISO, etc.

9

Brzezińska, K., and A. Szychowski. "Stability and Resistance of Steel Continuous Beams with Thin-Walled Box Sections." Archives of Civil Engineering 64, no. 4 (2018): 123–43. http://dx.doi.org/10.2478/ace-2018-0048.

Texte intégral

Résumé :

AbstractThe issues of local stability and ultimate resistance of a continuous beam with thin-walled box section (Class 4) were reduced to the analysis of the local buckling of bilaterally elastically restrained internal plate of the compression flange at longitudinal stress variation. Critical stress of the local buckling was determined using the so-called Critical Plate Method (CPM). In the method, the effect of the elastic restraint of the component walls of the bar section and the effect of longitudinal stress variation that results from varying distribution of bending moments were taken in

Styles APA, Harvard, Vancouver, ISO, etc.

10

Nandagopal, Meena. "Local anesthesia for cesarean section." Techniques in Regional Anesthesia and Pain Management 5, no. 1 (2001): 30–35. http://dx.doi.org/10.1053/trap.2001.21643.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Chen, Jing, Junbiao Dong, and Ye Yao. "Experimental Study on the Starting-Up and Heat Transfer Characteristics of a Pulsating Heat Pipe under Local Low-Frequency Vibrations." Energies 14, no. 19 (2021): 6310. http://dx.doi.org/10.3390/en14196310.

Texte intégral

Résumé :

Vibrations have attracted much attention as an effective method for enhancing heat transfer in pulsating heat pipes (PHPs). This study mainly investigates and explores the effects of local low-frequency vibrations on the starting-up and heat transfer characteristics of a PHP. The starting-up temperature and average temperatures along the evaporation section of the pulsating heat pipe were experimentally scrutinized, along with thermal performance, under local vibrations on evaporation, condensation and adiabatic sections, respectively. The following important conclusions can be derived by the

Styles APA, Harvard, Vancouver, ISO, etc.

12

Barotov, Jamshid, Jamshid Kobulov, Shuxrat Saidivaliyev, Samandar Sattorov, Gaybullo Fayzullayev, and Adylkhan Kibishov. "Effective organization of acceleration of local train movement at railway transport departments." E3S Web of Conferences 515 (2024): 02002. http://dx.doi.org/10.1051/e3sconf/202451502002.

Texte intégral

Résumé :

In the mentioned article, an analysis was conducted on the delay in providing services to local wagons due to the distance of up to 200 km between the sections located in the “UTY” joint-stock company. In this regard, works to improve the schedule of local trains have been carried out by extending the distance between two technical stations to 600-800 km. As a result of analyzing the options for transporting local wagons to technical stations in this article, movement schemes for local trains have been developed. The proposed schemes specify the movement of local trains from the initial statio

Styles APA, Harvard, Vancouver, ISO, etc.

13

Lee, Yeong Huei, Shahrin Mohammad, and Yee Ling Lee. "Comparison on Section Properties and Flexural Behaviour for Cold-Formed Steel Built-Up Section." Applied Mechanics and Materials 735 (February 2015): 80–84. http://dx.doi.org/10.4028/www.scientific.net/amm.735.80.

Texte intégral

Résumé :

This paper performs analytical and experimental investigation on the section properties of locally produced cold-formed steel sections. Effective width method given by BS EN1993-1-3 is used to calculate the section properties for two slender cold-formed steel channel sections, namely KS200C20 and KS250C20. Local buckling and distortional buckling are taken into account in the calculation. Effective width method has significantly reduced the full sectional area and thus gives a relative lower value for the sectional resistance of cold-formed steel channel sections. The analytical results is com

Styles APA, Harvard, Vancouver, ISO, etc.

14

I. Lapenko, O., O. V. Shevchenko, and N. Masud. "Compression Work of Steel Reinforced Concrete Columns." International Journal of Engineering & Technology 7, no. 3.2 (2018): 229. http://dx.doi.org/10.14419/ijet.v7i3.2.14408.

Texte intégral

Résumé :

The article deals with the calculation of steel reinforced concrete columns compression and verification of local stability in fixed formwork. It is concluded that it is expedient to calculate the total stability for the resulted sections, and when checking local stability – to follow the instructions Eurocode 4. When checking the local stability of steel sheets, working as part of reinforced concrete structures, the Eurocode 4 guidelines should be followed, while taking into account the following requirements: leave out of account on the local stability of the concrete cross-section (the stee

Styles APA, Harvard, Vancouver, ISO, etc.

15

Sim, Jisoo. "Seeing Impacts of Park Design Strategies on Local Economy through Big Data: A Case Study of Gyeongui Line Forest Park in Seoul." Sustainability 12, no. 17 (2020): 6722. http://dx.doi.org/10.3390/su12176722.

Texte intégral

Résumé :

Although big data has emerged as a crucial data source in urban studies, urban park-related studies still rarely use data such as that from card transactions. This study fills the gap between big data and park studies by using card transaction data within 400 m of the Gyeongui Line Forest Park in terms of economic benefits on local business. The authors divided the linear park into five sections according to each section’s design strategy to examine the relationship between the design features and card transaction behaviors. With the data, the authors analyzed the average ages of card users to

Styles APA, Harvard, Vancouver, ISO, etc.

16

Cooper, M. G., E. M. Feeney, M. Joseph, and J. J. McGuinness. "Local Anaesthetic Infiltration for Caesarean Section." Anaesthesia and Intensive Care 17, no. 2 (1989): 198–201. http://dx.doi.org/10.1177/0310057x8901700212.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

17

Weller, M. P. I., B. G. A. Weller, S. Baumann, and E. Coker. "The Local Use of Section 136." Psychiatric Bulletin 12, no. 6 (1988): 235–36. http://dx.doi.org/10.1192/pb.12.6.235.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Cooper, M. G., E. M. Feeney, M. Joseph, and J. J. MCGuinness. "Local Anaesthetic Infiltration for Caesarean Section." Obstetric Anesthesia Digest 9, no. 4 (1990): 246. http://dx.doi.org/10.1097/00132582-199001000-00071.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

19

Weller, Malcolm P. I., Ben G. A. Weller, Sean Baumann, and E. Coker. "The Local use of Section 136." Bulletin of the Royal College of Psychiatrists 12, no. 6 (1988): 235–36. http://dx.doi.org/10.1192/s0140078900020307.

Texte intégral

Résumé :

Recent attention has been focused on divergent practices in the implementation of Section 136, problems in its practice encountered by the police, and possible means of improving the service and reducing unnecessary detention. In these studies, doubts have been raised about the justness of the section, both in principle and in practice, and about the efficiency and efficacy of its implementation. In the context of the closure of the large psychiatric institutions it seems probable that these issues will become increasingly acute. The purpose of our brief study was therefore to investigate the

Styles APA, Harvard, Vancouver, ISO, etc.

20

Liang, Qimin, Bairu Xia, Baolin Liu, Zhen Nie, and Baokui Gao. "Experimental Study on the Local Drag of Completion String with Packers in Horizontal Wells." Coatings 10, no. 7 (2020): 657. http://dx.doi.org/10.3390/coatings10070657.

Texte intégral

Résumé :

The multistage stimulation technology of horizontal wells has brought huge benefits to the development of oil and gas fields. However, the completion string with packers often encounters stuck due to the large drag in the horizontal section, causing huge economic losses. The local drag of the completion string with packers in the horizontal section is very complicated, and it has not been fully understood by theoretical calculations. A local drag experiment is designed to simulate the influence of microsteps and cuttings on the local drag of the completion string with packers in the inclined a

Styles APA, Harvard, Vancouver, ISO, etc.

21

Palamarchuk, Gennadiy, Veronika Kuz'menkova, Aleksey Fomin, and Pavel Liberman. "Features of Managing Local Work on Railway Sections Serving Direct Outbound Routes." Proceedings of Petersburg Transport University 20, no. 2 (2023): 290–301. http://dx.doi.org/10.20295/1815-588x-2023-2-290-301.

Texte intégral

Résumé :

Purpose: Using simulation modeling to investigate the nature of the interrelationships of technologies for processing routes and train throughput at loading (unloading) stations and adjacent stages, as well as for justifying the appropriate parameters and coefficients to reflect these interrelations in the methodology of a comprehensive assessment of the capabilities of railway sections as a whole. Methods: Forecasting the volume of train, freight and shunting work of railway sections where it is planned to serve full-composite routes. Results: To develop an imitation model of the functioning

Styles APA, Harvard, Vancouver, ISO, etc.

22

Wang, Yuan Qing, Huan Xin Yuan, Yong Jiu Shi, and Ming Cheng. "Local Buckling Analysis of Aluminum I Section Beams." Advanced Materials Research 168-170 (December 2010): 1921–33. http://dx.doi.org/10.4028/www.scientific.net/amr.168-170.1921.

Texte intégral

Résumé :

Low elastic modulus of aluminum alloy gives prominence to lateral and local buckling of members, especially when thin walled sections are adopted to save material usage. Under certain conditions of loads and constraint, local buckling would occur in aluminum beams. A numerical study to assess the local stability of aluminum I section beams is presented in this paper. The study focused on two aspects: the local buckling of aluminum flange plate under compression, the local buckling of aluminum web plate under bending and shear. An extensive parameter analysis including width-to-thickness ratio,

Styles APA, Harvard, Vancouver, ISO, etc.

23

Allen, Kellie. "NACE Sections: Local Knowledge." CoatingsPro 12, no. 6 (2012): 24–25. https://doi.org/10.5006/cp2012_12_6-24.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

24

Landa, Evgeny, and Shemer Keydar. "Seismic monitoring of diffraction images for detection of local heterogeneities." GEOPHYSICS 63, no. 3 (1998): 1093–100. http://dx.doi.org/10.1190/1.1444387.

Texte intégral

Résumé :

Diffracted waves contain valuable information regarding both the structure and composition of the media they are in. In seismic data processing, however, these waves are usually regarded as noise. In this paper, we present an attempt to use scattered/diffracted waves for the detection of local heterogeneities. The method is based on the detection of diffracted waves by concentrating the signal amplitudes from diffracting points on the seismic section. This is done using a correlation procedure that enhances the amplitude of the seismic signal at the location of the diffractors on the common‐di

Styles APA, Harvard, Vancouver, ISO, etc.

25

Salman, Yasin K., Hussain H. Ahmed, and Hussein A. M. "COMBINED CONVECTION HEAT TRANSFER TO THERMALLY DEVELOPING FLOW IN HORIZONTAL CIRCULAR CYLINDER." Journal of Engineering 12, no. 01 (2006): 1–15. http://dx.doi.org/10.31026/j.eng.2006.01.01.

Texte intégral

Résumé :

Experiments were conducted to study the local and average heat transfer by mixed convection for hydrodynamically fully developed but thermally developing laminar air flow in horizontal circular cylinder. The experimental setup using an aluminum cylinder as test section with 30 mm inside diameter and 900 mm heated length (L/D=30), is subjected to a constant wall heat flux boundary condition. The investigation covers Reynolds number range from (400 to 1600), heat flux varied from (60W/m² to 400W/m²)and by using an aluminum entrance section pipes (calming sections) having the same inside diameter

Styles APA, Harvard, Vancouver, ISO, etc.

26

Nikulshin, Volodymyr, Alla Denysova, Sergey Melnik, Viktor Wysochin, Svetlana Bukhkalo, and Anatoly Andryushchenko. "METHOD OPTIMIZATION OF SEPARATE SECTIONS IN SUGAR PRODUCTION." Bulletin of the National Technical University "KhPI". Series: Innovation researches in students’ scientific work, no. 1 (October 2, 2022): 23–29. http://dx.doi.org/10.20998/2220-4784.2022.01.04.

Texte intégral

Résumé :

method of thermoeconomic optimization of separate section of a typical sugar plant. was developed. Since the main part of exergy losses is due to heat transfer at the finite temperature difference, the value of temperature drop in each of the section s was chosen as an independent variable in thermoeconomic optimization with the corresponding search for their minimum thermoeconomic costs. The existence of a local minimum for each section is due to the fact that with increasing temperature drop increases the amount of energy costs (because the exergy losses increase) and decreases the amount of

Styles APA, Harvard, Vancouver, ISO, etc.

27

Heggberget, Tor G., Roar A. Lund, Nils Ryman, and Gunnar Ståhl. "Growth and Genetic Variation of Atlantic Salmon (Salmo salar) from Different Sections of the River Alta, North Norway." Canadian Journal of Fisheries and Aquatic Sciences 43, no. 10 (1986): 1828–35. http://dx.doi.org/10.1139/f86-227.

Texte intégral

Résumé :

Growth of young Atlantic salmon (Salmo salar) from three different sections of the River Alta was correlated with estimated growth differences among adult salmon caught in corresponding sections of the river. Young salmon grew most quickly each of the three years investigated in the upper section of the river; further downriver, presmolts had a significantly lower growth rate. Growth calculations based on scale samples from adults indicated corresponding river growth patterns from the three sections. Salmon caught in the upper section of the river had significantly lower smolt age (mean 3.92 y

Styles APA, Harvard, Vancouver, ISO, etc.

28

Li, Qinxi, Shuping Jiang, and Xiang Chen. "Experiment on Pressure Characteristics of Submerged Floating Tunnel with Different Section Types Under Wave Condition." Polish Maritime Research 25, s3 (2018): 54–60. http://dx.doi.org/10.2478/pomr-2018-0112.

Texte intégral

Résumé :

Abstract Submerged floating tunnel (SFT for short) is a special underwater traffic structure, and wave load is one of the main environmental loads of SFT structure. In this paper, the 1:60 physical model test of three kinds of SFT in a two-dimensional wave flume is tested. The effects of random irregular waves on the SFT structure under different wave heights and periods are discussed. The study shows that: (1) Compared with circular and polygonal sections, there are multiple local peaks in the elliptical section during the period. with the increase of wave height, the number of local peaks al

Styles APA, Harvard, Vancouver, ISO, etc.

29

Deepak, MS, and VM Shanthi. "Section bending resistance of new Hybrid Double-I-Box Beams." Advances in Structural Engineering 21, no. 11 (2018): 1676–95. http://dx.doi.org/10.1177/1369433217753938.

Texte intégral

Résumé :

This article contains original works of testing and numerical validation on section bending resistance of new innovative built-up thin-walled metal Hybrid Double-I-Box Beam sections when subjected to local buckling. The cross section of Hybrid Double-I-Box Beam section is distinctive, which has advantages of both an ‘I’ section and a closed-box section. A total of 24 sections in three series that includes 8 homogeneous sections and 16 hybrid sections were tested under four-point bending. The varying parameters considered in the test specimens were as follows: first, hybrid parameter ratio, tha

Styles APA, Harvard, Vancouver, ISO, etc.

30

Yaniasih, Yaniasih, and Indra Budi. "Analysis of In text Citation Patterns in Local Journals for Ranking Scientific Documents." DESIDOC Journal of Library & Information Technology 41, no. 02 (2021): 94–101. http://dx.doi.org/10.14429/djlit.41.02.16257.

Texte intégral

Résumé :

In-text citations have been put forward as a new way to overcome the bias inherent in bibliographic citation analysis. In-text citation patterns have been used as the basis for citation analysis previously, but all the evidence has come from international journals. However, many countries have more local journals than international journals. This paper uses in-text citation analysis to examine local journals in Indonesia. The paper aims to determine the location-based citation pattern in the text and its effect on the articles’ and authors’ rankings. We collected articles from seven food scien

Styles APA, Harvard, Vancouver, ISO, etc.

31

Etukokwu, U. A., G. J. Udom, F. D. Giadom, and N. Ukpabi. "The effects of the rock stratigraphy on TPH/PAH absorption and transmission in some sections of the Gokana and Khana Local Government Areas." Scientia Africana 22, no. 3 (2024): 115–26. http://dx.doi.org/10.4314/sa.v22i3.10.

Texte intégral

Résumé :

Concentration of TPH/PAH in soils in parts of Gokana and Khana local government areas of Rivers state were examined using samples from 30 shallow wells drilled with hand auger. The core intervals penetrated, ranged between 0 on the surface to 100cm at total depth and was composited into two sections corresponding to upper 0 – 0.5m and lower 0.51 – 0.1m sections respectively. The samples were described to determine their sedimentological characteristics and effect on absorption and transmission of fluids. The total hydrocarbon content in samples of the study area were determined following the E

Styles APA, Harvard, Vancouver, ISO, etc.

32

Haider, Syed Waqar, and Sudhir Varma. "Another look at delineation of uniform pavement sections based on falling weight deflectometer deflections data." Canadian Journal of Civil Engineering 43, no. 1 (2016): 40–50. http://dx.doi.org/10.1139/cjce-2015-0281.

Texte intégral

Résumé :

The large amount of data commonly used to characterize the pavement surface and structural conditions offer a challenge to practitioners making decisions about the representative value of a particular parameter for design. While a large number of observations along the length of a road allow a better quantification of the expected value and variance of a parameter, basing a design on an average parameter along the project length will typically be uneconomical and less reliable. Therefore, pavement surface and structural condition data along a project length needs to be delineated into uniform

Styles APA, Harvard, Vancouver, ISO, etc.

33

Belyy, G. I., and M. O. Smirnov. "Improvement of engineering methods for calculating the strength of core elements of light steel thin-walled structures." Вестник гражданских инженеров 17, no. 1 (2020): 72–81. http://dx.doi.org/10.23968/1999-5571-2020-17-1-72-81.

Texte intégral

Résumé :

There has been carried out an improvement of the methodology for determination of reduced sections with the simultaneous action of the entire complex of efforts (including bimoment ones).The solution presented in dimensionless parameters uses the «Section» algorithm and the EUROCODE provisions regarding section reduction. At the beginning, a general dimensionless parameter of efforts is determined, which corresponds to the limiting conditions for ensuring the local stability and section shape. Then, as the specified parameter grows further, the development of the section reduction to the limit

Styles APA, Harvard, Vancouver, ISO, etc.

34

Baryshnikov, Sergei O., Alla B. Krasiuk, and Valentin B. Chistov. "THE INFLUENCE OF LOCAL RESIDUAL DEFORMATIONS ON THE SHIPS HULLS RELIABILITY." Vestnik Gosudarstvennogo universiteta morskogo i rechnogo flota imeni admirala S. O. Makarova 14, no. 3 (2022): 403–16. http://dx.doi.org/10.21821/2309-5180-2022-14-3-403-416.

Texte intégral

Résumé :

The changes in the bearing capacity of the hull sheets and beams of the ship’s set under the action of compressive and tensile forces are studied in the paper. The inf luence of local residual deformations on the permissible wear of the deformed element, which allows assessing its reliability, is established. Since the longitudinal forces (compressive and tensile) are significant only for the deck or bottom in the middle part of the hull, the effect of local residual deformations on the bearing capacity of sheets and beams of the longitudinal set is estimated only for these elements. It is ass

Styles APA, Harvard, Vancouver, ISO, etc.

35

Kosmatka, J. B. "On the Behavior of Pretwisted Beams With Irregular Cross-Sections." Journal of Applied Mechanics 59, no. 1 (1992): 146–52. http://dx.doi.org/10.1115/1.2899420.

Texte intégral

Résumé :

An analytical model is developed to study the extension-bending-torsion coupling behavior of an initially twisted elastic beam with an irregular cross-section. The determination of the complete displacement field requires solving a coupled two dimensional boundary value problem in a curvilinear coordinate system for the local deformations in the section plane and warping out of the section plane. The principle of minimum potential energy is applied to a discretized representation of the cross-section (Ritz method) to calculate solutions to this problem. Numerical results illustrate the pronoun

Styles APA, Harvard, Vancouver, ISO, etc.

36

Kim, Yong Chul. "Aeroelastic and Aerodynamic Tests of Wind Turbine with Various Polygonal Towers." Applied Sciences 11, no. 24 (2021): 11740. http://dx.doi.org/10.3390/app112411740.

Texte intégral

Résumé :

Traditionally, circular cross-section towers have been used as supporting systems of wind turbines, but weaknesses have become apparent with recent upsizing of wind turbines. Thus, polygonal cross-section towers have been proposed and used in Europe. In this study, the effects of polygonal cross-sections on the aeroelastic and aerodynamic characteristics of wind turbines were examined through a series of wind tunnel tests. Aeroelastic tests showed that a square cross-section tower showed instability vibrations, and polygonal cross-section towers showed limited vibrations for tower-only cases.

Styles APA, Harvard, Vancouver, ISO, etc.

37

Savoji, Fatemeh, and Reza Sazeedeh. "Local cohomology in Grothendieck categories." Journal of Algebra and Its Applications 19, no. 11 (2019): 2050222. http://dx.doi.org/10.1142/s0219498820502229.

Texte intégral

Résumé :

Let [Formula: see text] be a locally noetherian Grothendieck category. In this paper, we define and study the section functor on [Formula: see text] with respect to an open subset of [Formula: see text]. Next, we define and study local cohomology theory in [Formula: see text] in terms of the section functors. Finally, we study abstract local cohomology functor on the derived category [Formula: see text].

Styles APA, Harvard, Vancouver, ISO, etc.

38

Lyons, Carter G., and Gary L. Peterson. "Local endomorphism near-rings." Proceedings of the Edinburgh Mathematical Society 31, no. 3 (1988): 409–14. http://dx.doi.org/10.1017/s0013091500006805.

Texte intégral

Résumé :

The purpose of this paper is to study the consequences of an endomorphism near-ring of a finite group being a local near-ring and the existence of such near-rings. As we shall see in Section 2, an endomorphism near-ring of a finite group being local gives us some information about both the structure of the group (Theorem 2.2) and the automorphisms of the group lying in the near-ring (Theorem 2.3). Existence of local endomorphism near-rings of finite groups is considered in Section 3 where we obtain as our main result that any p-group of automorphisms of a p-group containing the inner automorph

Styles APA, Harvard, Vancouver, ISO, etc.

39

Idriz, Fahri, and Marin Geshkov. "Effective Management of Human Resources in Tourism through Motivation." Strategies for Policy in Science and Education-Strategii na Obrazovatelnata i Nauchnata Politika 31, no. 3s (2023): 126–39. http://dx.doi.org/10.53656/str2023-3s-10-eff.

Texte intégral

Résumé :

Tourism policy exists to provide tourists and the community with certainty about tourism development, maximizing benefits for stakeholders while minimizing adverse effects, costs, and other impacts. Many cities worldwide rely on tourism for local revenue, so the city government must consider a tourism development concept that preserves natural, social, and cultural resources for future generations. Sustainable tourism is developing quickly and favorably for the local population and the environment. In the foundation of effective touristic management lies the effective management of human resou

Styles APA, Harvard, Vancouver, ISO, etc.

40

Thórisdóttir, Ó., and M. Kiderlen. "Wicksell's Problem in Local Stereology." Advances in Applied Probability 45, no. 4 (2013): 925–44. http://dx.doi.org/10.1239/aap/1386857851.

Texte intégral

Résumé :

Wicksell's classical corpuscle problem deals with the retrieval of the size distribution of spherical particles from planar sections. We discuss the problem in a local stereology framework. Each particle is assumed to contain a reference point and the individual particle is sampled with an isotropic random plane through this reference point. Both the size of the section profile and the position of the reference point inside the profile are recorded and used to recover the distribution of the corresponding particle parameters. Theoretical results concerning the relationship between the profile

Styles APA, Harvard, Vancouver, ISO, etc.

41

Thórisdóttir, Ó., and M. Kiderlen. "Wicksell's Problem in Local Stereology." Advances in Applied Probability 45, no. 04 (2013): 925–44. http://dx.doi.org/10.1017/s0001867800006704.

Texte intégral

Résumé :

Wicksell's classical corpuscle problem deals with the retrieval of the size distribution of spherical particles from planar sections. We discuss the problem in a local stereology framework. Each particle is assumed to contain a reference point and the individual particle is sampled with an isotropic random plane through this reference point. Both the size of the section profile and the position of the reference point inside the profile are recorded and used to recover the distribution of the corresponding particle parameters. Theoretical results concerning the relationship between the profile

Styles APA, Harvard, Vancouver, ISO, etc.

42

Quan, Chunyan, and Merih Kucukler. "Local buckling response and design of stainless steel hollow sections at elevated temperatures." ce/papers 6, no. 3-4 (2023): 2026–31. http://dx.doi.org/10.1002/cepa.2325.

Texte intégral

Résumé :

AbstractThe structural behaviour and design of stainless steel hollow sections in fire, including stainless steel (i) circular hollow sections (CHS), (ii) elliptical hollow sections (EHS), (iii) square hollow sections (SHS) and (iv) rectangular hollow sections (RHS), are explored in this paper. Shell finite element models of stainless steel CHS, EHS, SHS and RHS able to replicate their structural response at elevated temperatures are created. Numerical parametric studies are performed on cold‐formed and hot‐rolled austenitic, duplex and ferritic stainless steel CHS, EHS, SHS and RHS subjected

Styles APA, Harvard, Vancouver, ISO, etc.

43

Vlasak, Pavel, Zdenek Chara, and Jiri Konfrst. "Flow behaviour and local concentration of coarse particles-water mixture in inclined pipes." Journal of Hydrology and Hydromechanics 65, no. 2 (2017): 183–91. http://dx.doi.org/10.1515/johh-2017-0001.

Texte intégral

Résumé :

AbstractNarrow particle size distribution basalt pebbles of mean particle size 11.5 mm conveyed by water in the pipe sections of different inclination were investigated on an experimental pipe loop, consisting of smooth stainless steel pipes of inner diameterD= 100 mm. Mixture flow-behaviour and particles motion along the pipe invert were studied in a pipe viewing section, the concentration distribution in pipe cross-section was studied with the application of a gamma-ray densitometer. The study refers to the effect of mixture velocity, overall concentration, and angle of pipe inclination on c

Styles APA, Harvard, Vancouver, ISO, etc.

44

Arsyad, Safnil, Vira Widiarti, and Mega Fitri Wulandari. "Argument Strategies and Linguistic Realizations of the Discussion Sections in Local, National, and International Journal Articles in English Education by Indonesian Authors: How do they differ and/or Resemble?" ENGLISH FRANCA : Academic Journal of English Language and Education 5, no. 1 (2021): 111. http://dx.doi.org/10.29240/ef.v5i1.2040.

Texte intégral

Résumé :

The quality of argument in the discussion section determines the quality of a journal article because in this section authors must argue convincingly so that readers may accept and use their new knowledge claim. This study aims to determine the differences in argument strategies and linguistic realizations in the discussion sections of unaccredited local, accredited national, and reputable international journals in English by Indonesian writers in the field of Language Teaching. The research method used was descriptive qualitative and quantitative research methods (mixed-method) in analyzing d

Styles APA, Harvard, Vancouver, ISO, etc.

45

Zhang, Wei, Ming Yi Zhang, and Li Tang Gao. "Experimental Study on the Bending Properties of GFRP Middle Beam in Foundation Pit Support." Advanced Materials Research 160-162 (November 2010): 921–26. http://dx.doi.org/10.4028/www.scientific.net/amr.160-162.921.

Texte intégral

Résumé :

The laboratory studies on the mechanical properties of the GFRP beams with two different sections are carried out. Their mechanical behavior and the failure features are described and analyzed. The test results indicate that the stability of the GFRP middle beam and the local strength at the joint between the web and the flange are the main factors in the design of the composite middle beams. Based on the test results, a new-style GFRP middle beam with- I-section and double webs is proposed and designed. Loading test shows that the composite material with I-section and double webs can satisfy

Styles APA, Harvard, Vancouver, ISO, etc.

46

LI, JIBIN. "HILBERT'S 16TH PROBLEM AND BIFURCATIONS OF PLANAR POLYNOMIAL VECTOR FIELDS." International Journal of Bifurcation and Chaos 13, no. 01 (2003): 47–106. http://dx.doi.org/10.1142/s0218127403006352.

Texte intégral

Résumé :

The original Hilbert's 16th problem can be split into four parts consisting of Problems A–D. In this paper, the progress of study on Hilbert's 16th problem is presented, and the relationship between Hilbert's 16th problem and bifurcations of planar vector fields is discussed. The material is presented in eight sections. Section 1: Introduction: what is Hilbert's 16th problem? Section 2: The first part of Hilbert's 16th problem. Section 3: The second part of Hilbert's 16th problem: introduction. Section 4: Focal values, saddle values and finite cyclicity in a fine focus, closed orbit and homocl

Styles APA, Harvard, Vancouver, ISO, etc.

47

Yidris, Noorfaizal, Mohamed Thariq Hameed Sultan, Mohammad Yazdi Harmin, and Azmin Shakrine Mohd Rafie. "Local-Overall Flexural Interaction of Pinned-Ended Thin-Walled I-Section Columns." Applied Mechanics and Materials 564 (June 2014): 444–48. http://dx.doi.org/10.4028/www.scientific.net/amm.564.444.

Texte intégral

Résumé :

The structural performance of thin-walled compression members are subject to the effects of local buckling, interaction between buckling modes, loading end conditions and material yielding and that due to these effects the compressive carrying capability of thin-walled members can be significantly diminished. This paper employs the finite element simulation to examine the local-overall flexural interaction response of pinned-ended thin-walled I-section columns that covers the complete compressed loading history from the onset of elastic local buckling through the nonlinear elastic and elasto-p

Styles APA, Harvard, Vancouver, ISO, etc.

48

Zhang, Lei, Qianjing Zhang, Genshu Tong, and Qunhong Zhu. "Elastic Local Buckling and Width-to-Thickness Limits of I-Beams Incorporating Flange–Web Interactions." Buildings 14, no. 2 (2024): 347. http://dx.doi.org/10.3390/buildings14020347.

Texte intégral

Résumé :

The local buckling of I-section beams is investigated with the flange–web interactions taken into account. Using numerical results employing the finite element method and a semi-analytical method, the flange–web interactions of I-sections and their effects on the buckling stresses are explored and discussed. Simple approximate solutions for the buckling coefficients of the web and compressive flange are developed using the energy method, and they are refined using the numerical results. Using the simple solutions for buckling coefficients, the limits for the width-to-thickness ratio of the com

Styles APA, Harvard, Vancouver, ISO, etc.

49

ZAMPERONI, P. "FEATURE EXTRACTION BY RANK-ORDER FILTERING FOR IMAGE SEGMENTATION." International Journal of Pattern Recognition and Artificial Intelligence 02, no. 02 (1988): 301–19. http://dx.doi.org/10.1142/s0218001488000194.

Texte intégral

Résumé :

The aim of this paper is to outline a unified approach to feature extraction for segmentation purposes by means of the rank-order filtering of grey values in a neighbourhood of each pixel of a digitized image. In the first section an overview of rank-order filtering for image processing is given, and a fast histogram algorithm is proposed. Section 2 deals with the extraction of a “locally most representative grey value”, defined as the maximum of the local histogram density function. In Section 3 several textural features are described, which can be extracted from the local histogram by means

Styles APA, Harvard, Vancouver, ISO, etc.

50

Szychowski, Andrzej, and Karolina Brzezińska. "Local Buckling and Resistance of Continuous Steel Beams with Thin-Walled I-Shaped Cross-Sections." Applied Sciences 10, no. 13 (2020): 4461. http://dx.doi.org/10.3390/app10134461.

Texte intégral

Résumé :

In modern steel construction, thin-walled elements with Class 4 cross-sections are commonly used. For the sake of the computation of such elements according to European Eurocode 3 (EC3), simplified computational models are applied. These models do not account for important parameters that affect the behavior of a structure susceptible to local stability loss. This study discussed the effect of local buckling on the design ultimate resistance of a continuous beam with a thin-walled Class 4 I-shaped cross-section. In the investigations, a more accurate computational model was employed. A new cal

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!