Se connecter

Bibliographies thématiques / Monitoring automation / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Monitoring automation.

Articles de revues sur le sujet « Monitoring automation »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Monitoring automation ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Farrell, Bradley. "The role of the human in an age of automation." APPEA Journal 58, no. 2 (2018): 545. http://dx.doi.org/10.1071/aj17188.

Texte intégral

Résumé :

The liquefied natural gas (LNG) industry in Australia has a very large installed asset base that is highly automated. This paper explores established, emerging and experimental automations that could materially impact human work in existing LNG facilities. The focus is on automations that assist with physical interventions on the built asset. Riley’s method for assessing the level of automation is used on current and emerging automations in the industry. Use cases demonstrate that as automation increases, the primary focus of the human becomes one of system design, monitoring and intervention.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Kuch, Ostap, and Ilona Lahun. "APIARY MONITORING AND AUTOMATION IOT SYSTEM." Measuring Equipment and Metrology 83, no. 4 (2022): 24–29. http://dx.doi.org/10.23939/istcmtm2022.04.024.

Texte intégral

Résumé :

A system of remote monitoring and automation apiary has been developed. This is a low-cost and scalable solution designed for deployment in distant rural areas. An unconventional solution is applying the industrial standard Modbus protocol to transfer data from the hives to a central server. This made it possible to reduce the cost of the system and standardize it. Monitoring the temperature and humidity inside the hives is important for analyzing the condition of bee colonies. The automation of the temperature and humidity control process is implemented based on a fuzzy model of the servo dri

Styles APA, Harvard, Vancouver, ISO, etc.

3

Abdullah, Muhammad Saef Tarqani, and Lucyantie Mazalan. "Smart Automation Aquaponics Monitoring System." JOIV : International Journal on Informatics Visualization 6, no. 1-2 (2022): 256. http://dx.doi.org/10.30630/joiv.6.1-2.925.

Texte intégral

Résumé :

Modern agriculture, such as aquaponics, has become a well-known solution nowadays for farming, especially in Asia countries. It provides an alternative to support food demands and maintain environmental sustainability. However, it requires manpower and time to maintain and monitor the system. This research proposes a smart automation aquaponic monitoring system that helps users maintain and monitor the system through smartphone applications. The system uses DHT11 to record temperature and humidity, HC-SR04 for water level, and FC-28 to maintain soil moisture. The sensors are integrated with We

Styles APA, Harvard, Vancouver, ISO, etc.

4

Cymek, D. H., S. Jahn, and D. H. Manzey. "Monitoring and Cross-Checking Automation." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 60, no. 1 (2016): 143–47. http://dx.doi.org/10.1177/1541931213601033.

Texte intégral

Résumé :

The present study addresses effects of human redundancy on automation monitoring and cross-checking. Thirty-six participants performed a multi-task, consisting of three subtasks that mimic basic work demands of operators in a control room of a chemical plant. One of the tasks was to monitor and cross-check a highly reliable and safety-critical automated process. Participants were randomly assigned to two groups: (1) “Non-redundant”: participants worked on all tasks alone as the only responsible operator. (2) “Redundant”: participants were informed that a second crewmate would work in parallel

Styles APA, Harvard, Vancouver, ISO, etc.

5

Molloy, Robert, and Raja Parasuraman. "Monitoring Automation Failures: Effects of Automation Reliability and Task Complexity." Proceedings of the Human Factors Society Annual Meeting 36, no. 18 (1992): 1518–21. http://dx.doi.org/10.1177/154193129203601833.

Texte intégral

Résumé :

Two studies examined the effects of automation reliability and task complexity on the monitoring of automation failures during performance of a flight-simulation task. In the first study, 24 students performed tracking and resource management tasks while an automation routine monitored for system malfunctions over four 30-minute sessions Detection of automation failures was significantly higher for variable reliability automation (mean = 81.6%) than for constant reliability automation (mean = 32.7%), indicating that constant-reliability automation induced complacency in monitoring. The effect

Styles APA, Harvard, Vancouver, ISO, etc.

6

H. Parthasarathi, Patra, Sridhar Gandatti, and Shaik Lateefa. "A novel approach to smart autonomous monitoring of indoor plant health based on leaf color." i-manager’s Journal on Image Processing 10, no. 4 (2023): 12. http://dx.doi.org/10.26634/jip.10.4.20289.

Texte intégral

Résumé :

Automation of technology is being implemented in various fields, including deep space research and the automobile industry. However, the real necessity for automation is identified in the agricultural sector. Therefore, this paper focuses on addressing this requirement and is primarily concerned with automating the determination of a plant's health based on the color content present in any one of its leaves, while simultaneously monitoring it. A plant's leaf is examined, and the algorithm makes the decision of whether to provide water and light whenever there is a notable change in the leaf's

Styles APA, Harvard, Vancouver, ISO, etc.

7

Chen, Jui Ho, Wen Tsai Sung, Hsi Chun Wang, and Chun Yen Chung. "Intelligent Environmental Monitoring and Automation System." Applied Mechanics and Materials 418 (September 2013): 108–11. http://dx.doi.org/10.4028/www.scientific.net/amm.418.108.

Texte intégral

Résumé :

This study production of smart house to show the entire system, the use of self-sensing module and the 8051 monocrystal chip processing sensor signals, the success achieved with the measurement of temperature, humidity, illumination, carbon monoxide sensor module. The way transmits by wireless (ZigBee chips) and wired (DAQ signal acquisition device) sensor value send to the server-side carries on remote monitoring and record etc. In accordance with environmental requirements set in the server-side sensing value, using the infrared ray way automatic control load. When necessity also can use the

Styles APA, Harvard, Vancouver, ISO, etc.

8

Vancea, A. P., and I. Orha. "Smart home automation and monitoring system." Carpathian Journal of Electronic and Computer Engineering 11, no. 1 (2018): 40–43. http://dx.doi.org/10.2478/cjece-2018-0007.

Texte intégral

Résumé :

Abstract Our project describes a system for the automation and monitoring of a smart house. The system consists of several sensors such as: temperature sensor, humidity sensor, light sensor and presence sensor. The data from sensors is processed and transmitted to the central module via Xbee-ZigBee or to a smartphone through the Bluetooth module. The central module connects at the Internet via WiFi and through an application we can remotely monitor the state of the house or control various devices within the enclosure.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Piskunov, Sergey, Alexey Mokeev, and Dmitry Ulyanov. "Transformer protection, automation and monitoring systems." E3S Web of Conferences 584 (2024): 01032. http://dx.doi.org/10.1051/e3sconf/202458401032.

Texte intégral

Résumé :

This paper presents the results of research on improving the protection, automation and monitoring systems of power transformers (PT) in 6-35 kV distribution networks. The authors have developed improved algorithms for differential and distance protection of a transformer based on measuring voltage and current synchrophasors, proposed additional criteria for blocking protection in the event of a magnetization inrush current (MIC), and considered the functions of the transformer monitoring and automation system based on synchrophasor technology.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Nelli, Manohar. "HOME AUTOMATION SYSTEM." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem32505.

Texte intégral

Résumé :

The project presents the development of an advanced home automation system aimed at revolutionizing residential living through smart technologies. Leveraging Internet of Things (IoT) principles, the system integrates various sensors, actuators, and communication protocols to enable remote monitoring and control of home appliances and devices. Through a user-friendly interface accessible via mobile or web platforms, homeowners can effortlessly manage their home environment, ensuring convenience, security, and energy efficiency. The project emphasizes scalability and interoperability, paving the

Styles APA, Harvard, Vancouver, ISO, etc.

11

Onnasch, Linda, and Steffen Hösterey. "Stages of Decision Automation: Impact on Operators’ Role, Awareness and Monitoring." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 63, no. 1 (2019): 282–86. http://dx.doi.org/10.1177/1071181319631126.

Texte intégral

Résumé :

The study investigated the impact of different stages of decision automation (action selection vs. action implementation) on participants’ monitoring, situation awareness (SA), and role definition in a multitask simulation. It was hypothesized that particularly because of being out-of-the-loop when working with full automation (action implementation) operators might feel accountable for the overall task, have an enhanced SA and show frequent information sampling. In contrast, operators working with partial automation might define their role limited to the only task not supported by automation,

Styles APA, Harvard, Vancouver, ISO, etc.

12

Liang, Steven Y., Rogelio L. Hecker, and Robert G. Landers. "Machining Process Monitoring and Control: The State-of-the-Art." Journal of Manufacturing Science and Engineering 126, no. 2 (2004): 297–310. http://dx.doi.org/10.1115/1.1707035.

Texte intégral

Résumé :

Research in automating the process level of machining operations has been conducted, in both academia and industry, over the past few decades. This work is motivated by a strong belief that research in this area will provide increased productivity, improved part quality, reduced costs, and relaxed machine design constraints. The basis for this belief is two-fold. First, machining process automation can be applied to both large batch production environments and small batch jobs. Second, process automation can autonomously tune machine parameters (feed, speed, depth of cut, etc.) on-line and off

Styles APA, Harvard, Vancouver, ISO, etc.

13

Chen, Shu-chun. "Research on Electrical Automation Monitoring System Model of Power Plant Based on CAN Bus." Journal of Electrical and Computer Engineering 2022 (April 11, 2022): 1–11. http://dx.doi.org/10.1155/2022/4858826.

Texte intégral

Résumé :

Using the traditional manual operation mode to control the electrical equipment of the power plant was not only inefficient and unsafe but also difficult to adapt to the use of new equipment. Therefore, this article puts forward the research on the model of power plant electrical automation monitoring system based on CAN bus, which was of great significance to improve the operation monitoring ability and management efficiency of power plant electrical equipment. Based on the analysis of the design mode and main functions of electrical equipment automation control system in power plant, this ar

Styles APA, Harvard, Vancouver, ISO, etc.

14

Ahire, Punam. "Smart Dam Monitoring System." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 02 (2025): 1–9. https://doi.org/10.55041/ijsrem41290.

Texte intégral

Résumé :

This paper presents an IoT-based dam monitoring and automation system designed to improve the efficiency, safety, and reliability of dam operations. The system employs an ultrasonic sensor to continuously measure the water level and a NodeMCU microcontroller to process the data. This information is transmitted in real-time to the Blynk app, which provides a user-friendly interface for monitoring and control. The system also includes a servo motor for automatic and manual gate control, enabling the prevention of dam overflows or maintaining adequate water storage levels. With features like auto

Styles APA, Harvard, Vancouver, ISO, etc.

15

Zayas-Cabán, Teresa, Saira Naim Haque, and Nicole Kemper. "Identifying Opportunities for Workflow Automation in Health Care: Lessons Learned from Other Industries." Applied Clinical Informatics 12, no. 03 (2021): 686–97. http://dx.doi.org/10.1055/s-0041-1731744.

Texte intégral

Résumé :

Abstract Background Workflow automation, which involves identifying sequences of tasks that can be streamlined by using technology and modern computing, offers opportunities to address the United States health care system's challenges with quality, safety, and efficiency. Other industries have successfully implemented workflow automation to address these concerns, and lessons learned from those experiences may inform its application in health care. Objective Our aim was to identify and synthesize (1) current approaches in workflow automation across industries, (2) opportunities for applying wo

Styles APA, Harvard, Vancouver, ISO, etc.

16

Mouloua, Mustapha, Raja Parasuraman, and Robert Molloy. "Monitoring Automation Failures: Effects of Single and Multi-Adaptive Function Allocation." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 37, no. 1 (1993): 1–5. http://dx.doi.org/10.1177/154193129303700102.

Texte intégral

Résumé :

Adaptive function allocation has been proposed to allow the advantages of task automation to be realized without some of the disadvantages of “static” automation. However, few empirical studies of the efficacy of adaptive allocation have been reported. The effects of adaptive function allocation on monitoring for automation failure during multi-task flight simulation were examined in two experiments. The first study examined the use of two methods of adaptive function allocation as a possible counter-measure to automation-induced monitoring problems. Subjects were required to perform a trackin

Styles APA, Harvard, Vancouver, ISO, etc.

17

Efendiev, B., V. Shuganov, Z. Kantiev, and A. Shogenov. "Ways to solve automation problems in meat poultry farming." BIO Web of Conferences 130 (2024): 05007. http://dx.doi.org/10.1051/bioconf/202413005007.

Texte intégral

Résumé :

Solving the automation problems in the process lines of poultry farms is a complex and multifaceted task. It ensures the smooth operation of the poultry farm without human involvement, replaces manual labor, and prevents potential errors. Additionally, automating of poultry farms solves the problem of labor shortage and makes “non-prestigious work” interesting and attractive for young people. Automation systems of feeding, watering, manure removal, lighting, and ventilation in the poultry house reduces the complexity of processes, enables remote management of the entire production chain via a

Styles APA, Harvard, Vancouver, ISO, etc.

18

Neeli, Sethu Sesha Synam. "Empowering Database Administrators: The Essential Role of Automation in Modern Practices." International Scientific Journal of Engineering and Management 04, no. 01 (2025): 1–7. https://doi.org/10.55041/isjem01338.

Texte intégral

Résumé :

Managing large servers and databases while maintaining the uninterrupted functioning of critical applications presents significant challenges for database administrators. Automating database administration has become a crucial component in enhancing high availability, reliability, efficiency, and scalability. To reduce mistakes, minimize manual interventions, and improve database process performance, automation is essential. Important components include disaster recovery plans, security monitoring, performance review, and automatic backups, all of which are intended to prevent data loss. This

Styles APA, Harvard, Vancouver, ISO, etc.

19

Efanov, D. V. "MONITORING OF COMPOUND STANDARD OBJECTS OF RAILWAY AUTOMATION." World of Transport and Transportation 16, no. 4 (2018): 74–86. http://dx.doi.org/10.30932/1992-3252-2018-16-3-6.

Texte intégral

Résumé :

ABSTRACT Modern systems of continuous monitoring of railway automation and telemechanics devices receive a large set of discrete and analog diagnostic information that is difficult to be analyzed during maintenance and troubleshooting. For centralization of information and its convenience for an end user, it is offered within the system «Hardware-software complex of dispatch control» (APK-DK) to group data from typical objects of automation and to output them into separate technological windows. The article describes APK-DK measuring controllers, as well as the order of output of information a

Styles APA, Harvard, Vancouver, ISO, etc.

20

Han, Yinfeng, Peng Li, Chongyou Xu, Xiaming Ye, and Yuzhe Xie. "Research and application of safety monitoring technology of distribution automation based on SOM neural network." International Journal of Low-Carbon Technologies 19 (2024): 559–68. http://dx.doi.org/10.1093/ijlct/ctae018.

Texte intégral

Résumé :

Abstract For automatic situation monitoring in power distribution safety monitoring, data features are mainly extracted by single hidden layer neural network, which makes the standard error of monitoring results larger. Therefore, the research and application of power distribution automation safety monitoring technology based on SOM neural network are proposed. Preprocess the power grid, collect distribution operation data, set multi-dimensional monitoring nodes according to the collected data, build a distribution operation status monitoring model and analyze the data fusion technology of dis

Styles APA, Harvard, Vancouver, ISO, etc.

21

Boye, Harikiran, and Srinivas Venkata. "Automating DevOps for Continuous Delivery and Operational Excellence." FMDB Transactions on Sustainable Computing Systems 2, no. 1 (2024): 32–42. http://dx.doi.org/10.69888/ftscs.2024.000195.

Texte intégral

Résumé :

Integrating automation into DevOps practices has become crucial for achieving continuous delivery and operational excellence in software development. This research paper explores the methodologies and benefits of automating DevOps processes, focusing on how automation facilitates seamless collaboration, reduces errors, accelerates software delivery, and ensures consistent quality. The study discusses the implementation of automated pipelines, monitoring, and feedback mechanisms that enhance the efficiency of software deployment. Organizations can achieve faster release cycles, improve scalabil

Styles APA, Harvard, Vancouver, ISO, etc.

22

Pilkevych, Yu H., and H. M. Rozorinov. "AUTOMATION OF MONITORING OF FRESH RESERVOIR ECOSYSTEM." Scientific notes of Taurida National V.I. Vernadsky University. Series: Technical Sciences 1, no. 6 (2020): 123–28. http://dx.doi.org/10.32838/tnu-2663-5941/2020.6-1/21.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

23

Prio Pambudi, Kukuh, Muhammad Dimas Arofah, Anicetus Damar Aji, and Muchlishah Much. "Desain Sistem Monitoring Building Automation Berbasis IoT." ELECTRICES 3, no. 2 (2021): 40–46. http://dx.doi.org/10.32722/ees.v3i2.4111.

Texte intégral

Résumé :

Desain Sistem Monitoring Building Automation Berbasis IoT dibuat untuk melihat dan memantau sensor yang bekerja di dalam gedung sehingga dapat memudahkan dalam melihat sistem suatu gedung dalam 1 tempat. Pada sistem ini menggunakan beberapa sensor seperti Flame sensor, DHT 11, MQ 135 dan SW-420. Kemudian untuk microcontroller yang digunakan adalah Arduino Mega 2560 kemudian untuk mengirim data sehingga online menggunakan NodeMCU ESP8266. Setelah itu platform yang digunakan untuk me-monitoring sistem tersebut menggunakan platform GOIOT. Cara kerja sistem ini adalah dengan mendeteksi sensor maka

Styles APA, Harvard, Vancouver, ISO, etc.

24

Varughese, Indu Reena. "Automation in Monitoring of Hydroponics for Tomato." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 761–65. http://dx.doi.org/10.22214/ijraset.2021.36384.

Texte intégral

Résumé :

Nowadays, as the population is increasing widely, it becomes necessary for the cultivation of plants without the utilization of many land resources. There are different types of soil present on earth and different crops need different types of soils. Due to scarcity of water, it becomes difficult for the farmers to cultivate crops on land which requires a lot of water. With a hydroponic system in which the farmer has more control over plant growth, can get very high yields. In conventional methods, farmers need to monitor as well as manually control the parameters required for the efficient gr

Styles APA, Harvard, Vancouver, ISO, etc.

25

Pau, Marco, and Paolo Attilio Pegoraro. "Monitoring and Automation of Complex Power Systems." Energies 15, no. 8 (2022): 2949. http://dx.doi.org/10.3390/en15082949.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

26

Sawant, Nihali. "Remote Healthcare Monitoring System with Home Automation." International Journal for Research in Applied Science and Engineering Technology 7, no. 8 (2019): 255–59. http://dx.doi.org/10.22214/ijraset.2019.8035.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

27

Bharti, Lakita, Mohit Chandrapuri, Varsha Nagle, Praveen Dhurve, and Jyoti Patil. "Garden Monitoring and Automation Using Atmega 16." Asian Journal of Applied Science and Technology 04, no. 01 (2020): 127–30. http://dx.doi.org/10.38177/ajast.2020.4113.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

28

Dehran, Sanjay. "Modern Day Automation for Heat Exchanger Monitoring." International Journal of Mechanical Engineering and Applications 5, no. 1 (2017): 15. http://dx.doi.org/10.11648/j.ijmea.20170501.12.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

29

Singh, Indramani L., Robert Molloy, and Raja Parasuraman. "Individual Differences in Monitoring Failures of Automation." Journal of General Psychology 120, no. 3 (1993): 357–73. http://dx.doi.org/10.1080/00221309.1993.9711153.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

30

kumar S, Pradeep, and Byregowda B K. "Greenhouse Monitoring and Automation System Using Microcontroller." International Journal of Engineering Trends and Technology 45, no. 5 (2017): 196–201. http://dx.doi.org/10.14445/22315381/ijett-v45p241.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

31

Medvedskyi, Yurii, Andriy Annenkov, Oleksandr Isayev, and Roman Demianenko. "AUTOMATION OF GEODESIC MONITORING HIGH-RISE STRUCTURES." Urban development and spatial planning, no. 81 (August 31, 2022): 244–53. http://dx.doi.org/10.32347/2076-815x.2022.81.244-253.

Texte intégral

Résumé :

The article considers the existing methods used in the problem of geodetic monitoring of structures, analyzes the possibilities and gives a preliminary assessment of the accuracy of their use in monitoring high-rise structures. Methods have been identified that allow obtaining measurement results with a high sampling rate and have the potential for automation. Methods have been identified that allow solving the problem of calculating the daily fluctuations of a structure from the effects of solar radiation and wind load separately from the values of heel and draft.

Styles APA, Harvard, Vancouver, ISO, etc.

32

S. Jadhav, Vilas, Somnath A Wankhede, Priyanka B. Nikam, and Anil L. Tidar. "Greenhouse Monitoring and Controlling Using LabVIEW Automation." Journal of Control System and Control Instrumentation 9, no. 3 (2023): 27–33. http://dx.doi.org/10.46610/jocsaci.2023.v09i03.005.

Texte intégral

Résumé :

Traditional greenhouses need to regulate or monitor and control the climactic condition changes to grow healthy plants and other crops. A greenhouse control system should ideally include data collecting, transmission, and remote monitoring. This paper design a system of a model that controls and monitor the temperature, light intensity and soil moisture level right and left side of the soil by sensing the values from sensors and controlling the temperature, and moisture of the soil using one fan, water pumps accordingly. Monitoring and controlling a greenhouse environment collects data from se

Styles APA, Harvard, Vancouver, ISO, etc.

33

Kolhe, Pradyumna Manoj. "IoT-Based Dam Automation and Monitoring System." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 06 (2025): 1–9. https://doi.org/10.55041/ijsrem50307.

Texte intégral

Résumé :

Abstract - This paper addresses the gap in real-time dam water level and flow rate monitoring. It enables remote monitoring of water parameters which is important for energy, irrigation, and flood control. Often, traditional monitoring systems for dams lack automation and real-time data acquisition, and there is no information exchange between various dams in actual time. In order to fill these gaps, the current work proposes an IoT based automation and monitoring system using ESP32 microcontrollers, ultrasonic distance measuring sensors, and wireless communication modules. The system under co

Styles APA, Harvard, Vancouver, ISO, etc.

34

Ismailova, R., S. Aydinova, E. Tleugazy, and A. Tolep. "AUTOMATION OF MONITORING STUDENTS' PROGRESS IN UNIVERSITIES." Scientific heritage, no. 148 (November 10, 2024): 71–73. https://doi.org/10.5281/zenodo.14063671.

Texte intégral

Résumé :

This article identifies the role of automation of certain educational processes and teaching functions in learning, including analysis and forecasting of possible learning outcomes based on statistical data, monitoring of academic performance, as well as modeling the most effective curriculum. The work gradually reveals the mechanism of machine learning algorithms, its implementation and adaptation in the educational environment, as well as the consequences of its application in practice. The role of automation of educational processes in learning was revealed through questionnaires and survey

Styles APA, Harvard, Vancouver, ISO, etc.

35

Batkamwar, Aditya, Payal Bobade, Tejaswini chaure, Anushka Chitke, and Dr Devashri Kodgire. "Lab Automation." International Journal for Research in Applied Science and Engineering Technology 11, no. 12 (2023): 542–45. http://dx.doi.org/10.22214/ijraset.2023.57388.

Texte intégral

Résumé :

Abstract: This lab automation project aims to revolutionize scientific workflows by implementing a comprehensive system that integrates cutting-edge technologies to streamline processes and enhance accuracy in laboratory settings. Leveraging robotics, sensor networks, and advanced software, our solution automates repetitive tasks, minimizes human error, and accelerates experimentation cycles. The system's modular design allows seamless integration into existing laboratory infrastructure, ensuring adaptability across diverse research domains. Through real-time data monitoring and analysis, our

Styles APA, Harvard, Vancouver, ISO, etc.

36

Peddireddy, Abhiram Reddy. "Effective Workflow Automation in GitHub: Leveraging Bash and YAML." Journal of Artificial Intelligence & Cloud Computing 3, no. 3 (2024): 1–7. http://dx.doi.org/10.47363/jaicc/2024(3)345.

Texte intégral

Résumé :

Automation plays a role, in todays software development landscape within continuous integration and continuous delivery (CI/CD) setups. GitHub Actions, a tool for automating tasks in GitHub repositories heavily relies on scripting languages to define and execute operations. This paper delves into the merging of Bash and YAML scripting languages to enhance automation, on GitHub. By utilizing Bash for command execution and YAML for configuration developers can build resilient, effective and secure workflows. This method simplifies the automation of development processes enhances error handling a

Styles APA, Harvard, Vancouver, ISO, etc.

37

Parasuraman, Raja, Mustapha Mouloua, and Robert Molloy. "Effects of Adaptive Task Allocation on Monitoring of Automated Systems." Human Factors: The Journal of the Human Factors and Ergonomics Society 38, no. 4 (1996): 665–79. http://dx.doi.org/10.1518/001872096778827279.

Texte intégral

Résumé :

The effects of adaptive task allocation on monitoring for automation failure during multi task flight simulation were examined. Participants monitored an automated engine status task while simultaneously performing tracking and fuel management tasks over three 3D-min sessions. Two methods of adaptive task allocation, both involving temporary return of the automated engine status task to the human operator (“human control”), were examined as a possible countermeasure to monitoring inefficiency. For the model-based adaptive group, the engine status task was allocated to all participants in the m

Styles APA, Harvard, Vancouver, ISO, etc.

38

Xie, Hai Jiang, and Wei Li Li. "Application Research of Electrical Automation Technology for Power Plant." Applied Mechanics and Materials 721 (December 2014): 595–98. http://dx.doi.org/10.4028/www.scientific.net/amm.721.595.

Texte intégral

Résumé :

The electrical automation technology is an advanced technology, in power plants, mainly giving play to the role of monitoring, monitoring analysis for the operation condition of the electric, also can have the data signal feedback function. Electrical automation technology is mostly play the function of monitoring, during the running of the electrical equipment, the equipment running status monitoring, through the analysis of the data and feedback, can timely find problems arising from the operation, and warning. In power plants, the use of automation technology also analysis and remote data t

Styles APA, Harvard, Vancouver, ISO, etc.

39

Rákay, Róbert, and Alena Galajdová. "TESTING PROPERTIES OF SMART CONDITON MONITORING SYSTEM." TECHNICAL SCIENCES AND TECHNOLOGIES, no. 3(21) (2020): 266–73. http://dx.doi.org/10.25140/2411-5363-2020-3(21)-266-273.

Texte intégral

Résumé :

Urgency of the research. Modern trends in the automation focus on the implementation of new technologies to reduce production and maintenance costs. Maintenance and service of every industrial automation system is crucial. Target setting. When engineers try to optimize the cost of production and processes, they usually reduce maintenance cost. The latest smart monitoring systems provide significant benefits in terms of risk management and equipment failure reduction. Actual scientific researches and issues analysis. To prepare this paper, various publicly available datasheets and experimental

Styles APA, Harvard, Vancouver, ISO, etc.

40

Manoj, Kodali. "Smart Home Automation." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 04 (2025): 1–9. https://doi.org/10.55041/ijsrem45582.

Texte intégral

Résumé :

Abstract - The Cadio application is a smart home automation solution that combines IoT technology with AI-powered tools to provide seamless management and monitoring of household equipment. It provides multi-mode management using voice commands with Google Assistant or Amazon Alexa, allowing users to operate appliances locally or remotely via the internet. The solution works with both local Wi-Fi networks and the Cadio cloud, delivering excellent connection stability and quick reaction times. The Cadio app allows users to plan activities or set timers for autonomous appliance operation, and it

Styles APA, Harvard, Vancouver, ISO, etc.

41

Gouda,, Dr Pramod Kumar. "SMART HOME MONITORING SYSTEM." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem30020.

Texte intégral

Résumé :

The Project is about building a low-cost home automation system. It mainly focuses on creating an Internet based home automation system that can be automatically configured to run based on various conditions or that can be used to control multiple components through the internet. Wireless technology is used to enable remote access from a smartphone, PC, manually and voice command. The system is an accessible interface, affordable construction, and easy installation made it easier for controlling household electrical appliances and devices. The created system supports wireless control of lights

Styles APA, Harvard, Vancouver, ISO, etc.

42

Arshdeep Singh Sachdeva and Shreya Kapoor. "Automated E-Commerce and Web Automation using Puppeteer." International Journal for Modern Trends in Science and Technology 6, no. 12 (2020): 277–81. http://dx.doi.org/10.46501/ijmtst061251.

Texte intégral

Résumé :

Automation replaces human work in repetitive, tedious tasks, and minimizes the quantity of errors. With the correct automation tools, it's possible to automate browser tasks, web testing, and online data extraction, to fill forms, scrape data, transfer data between applications, and generate reports. In this paper we will discuss about Automated E-Commerce website. The research project focuses on automating the task of placing an order of particular set of items from an online website. The idea is to save time and effort of the user by automating every task from signing in to adding products t

Styles APA, Harvard, Vancouver, ISO, etc.

43

Nazarov, Dmitry, Vladimir Sulimin, and Vladislav Shvedov. "Advancing environmental stewardship: The role of automation in enhanced environmental monitoring." E3S Web of Conferences 542 (2024): 05005. http://dx.doi.org/10.1051/e3sconf/202454205005.

Texte intégral

Résumé :

This article explores the transformative potential of automation in environmental monitoring, a pivotal development in the context of global environmental challenges. Traditional environmental monitoring methods, while effective, are often labor-intensive, time-consuming, and can be limited in scope and frequency. The advent of automation technologies presents a significant opportunity to overcome these limitations, offering more comprehensive, continuous, and precise monitoring capabilities. We examine the integration of automated sensors, drones, satellite imagery, and AI-driven data analysi

Styles APA, Harvard, Vancouver, ISO, etc.

44

P, Loganathan. "Cloud based Monitoring and Control Automation of Industrial Demand Prediction System." Journal of Advanced Research in Dynamical and Control Systems 12, SP7 (2020): 1808–16. http://dx.doi.org/10.5373/jardcs/v12sp7/20202293.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

45

M, Ravi Kumar, Dr Lakshmi CR, Madhan HR, and Arun Kumar DS. "A Comprehensive Review on Fish Feeding Automation and Aquaponics Monitoring System." International Journal of Research Publication and Reviews 5, no. 3 (2024): 7052–60. http://dx.doi.org/10.55248/gengpi.5.0324.0822.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

46

Jugnu Misal. "Mastering Automation Tools for Incident Management and Monitoring." International Journal of Scientific Research in Computer Science, Engineering and Information Technology 10, no. 6 (2024): 1465–81. https://doi.org/10.32628/cseit241061184.

Texte intégral

Résumé :

This comprehensive article examines the evolution and implementation of modern automation and monitoring tools in enterprise environments. The article explores four key areas: enterprise automation frameworks, Prometheus monitoring capabilities, Nagios infrastructure monitoring, and Datadog observability solutions. Through a detailed examination of implementation methodologies, performance metrics, and operational impacts, this article provides insights into how organizations can optimize their IT operations through intelligent automation and monitoring. The article encompasses advanced featur

Styles APA, Harvard, Vancouver, ISO, etc.

47

Yan, Tao. "Artificial Intelligence Technology in Electric Automation Monitoring System of Power Plant." Journal of Physics: Conference Series 2143, no. 1 (2021): 012010. http://dx.doi.org/10.1088/1742-6596/2143/1/012010.

Texte intégral

Résumé :

Abstract With the development of large-capacity and high-parameter units, the degree of electrical automation in power plants is becoming more and more important. Due to the relatively backward technology of traditional electrical monitoring, it is more human monitoring, and the level of automation is low. Nowadays, communication network technology has been rapidly developed, and machinery and equipment have become more intelligent. These have laid a good technical foundation for the reform and innovation of electrical automation monitoring systems in power plants. This article first studies t

Styles APA, Harvard, Vancouver, ISO, etc.

48

Ivanova, Y., S. Ivanov, K. Peychev, and I. Belovski. "Application of modern means and technologies for monitoring the microclimate in greenhouses." Agricultural Science and Technology 16, no. 4 (2024): 117–21. https://doi.org/10.15547/ast.2024.04.047.

Texte intégral

Résumé :

Abstract. Modern tools and technologies are increasingly used to monitor the main parameters of the microclimate in greenhouses. In this article, an overview and comparative analysis of modern sensor devices applicable in the measurement of physical parameters in greenhouses is made. The various technologies and components for automation of microclimate monitoring are considered. The possibilities offered by management software solutions are considered. The possibilities of IoT technologies for automating processes in greenhouses are described.

Styles APA, Harvard, Vancouver, ISO, etc.

49

Gawade, Prof N. R. "Review on Forest Monitoring Rover." International Journal for Research in Applied Science and Engineering Technology 12, no. 12 (2024): 602–4. https://doi.org/10.22214/ijraset.2024.65660.

Texte intégral

Résumé :

Automation is the process to reduce the man power and the idea of automation is to provide a test run in an Atmega328p microcontroller-based system to monitor and control the production operation. The main objective of this project is to control the electric power wastage and take data logs from a motor and also to check the performance of an employee in industries. This system works on Atmega328p microcontroller so it requires low cost and gives efficient performance in unnecessary electric power wastage in power loom motors. All the system is designed on basis of Atmega328p microcontroller,

Styles APA, Harvard, Vancouver, ISO, etc.

50

Ferraro, James C., and Mustapha Mouloua. "Automated Alert Failures and their Impact on Operator Performance and Trust." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 65, no. 1 (2021): 1286–90. http://dx.doi.org/10.1177/1071181321651290.

Texte intégral

Résumé :

Despite its rapid advancement, automation remains vulnerable to system failures. The reliability of automation may impact users’ trust and how they interact with it. Additionally, the type of error can uniquely redirect user behavior. This study investigated how reliability and error type impact operator trust and monitoring performance. Participants completed a monitoring task at either 50% or 90% reliability, experiencing either misses or false alarms from an automated alert system. It was hypothesized that automation reliability would impact trust, while error type would also impact relianc

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!