Se connecter

Bibliographies thématiques / PIEZOSENSORS / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : PIEZOSENSORS.

Articles de revues sur le sujet « PIEZOSENSORS »

Auteur : Grafiati

Publié le 23 février 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 44 meilleurs articles de revues pour votre recherche sur le sujet « PIEZOSENSORS ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Vu, Hoang Yen, and A. N. Zyablov. "Application of MIP-sensors to the determination of preservatives in non-alcoholic drinks." Industrial laboratory. Diagnostics of materials 88, no. 8 (2022): 10–16. http://dx.doi.org/10.26896/1028-6861-2022-88-8-10-16.

Texte intégral

Résumé :

The piezosensors modified with a molecularly imprinted polymer (MIP) with potassium sorbate (MIP-E202) and sodium benzoate (MIP-E211) imprints are tested and implemented in the determination of preservatives in soft drinks. Molecularly imprinted polymers were synthesized by noncovalent imprinting on the base of copolymer of 1,2,4,5-benzene tetracarboxylic acid dianhydride and 4,4’-diaminodiphenyl oxide in N,N-dimethylformamide (DMF) in the presence of templates. Piezoelectric sensors based on MIP and non-imprinted polymer (polyimide) were compared. High values of the imprinting factor (IF) and

Styles APA, Harvard, Vancouver, ISO, etc.

2

Vu, Hoang Yen, and A. N. Zyablov. "Determination of preservatives in liquids by piezosensors." Аналитика и контроль 26, no. 2 (2022): 134–40. http://dx.doi.org/10.15826/analitika.2022.26.2.001.

Texte intégral

Résumé :

In the current study, piezosensors based on the molecularly imprinted polyimides with imprints of potassium sorbate and sodium benzoate were obtained. Molecularly Imprinted Polymers (MIPs) were synthesized using a polyimide and a non-covalent imprinting technique. It was established that the use of 0.1 g/mL template concentration at the thermochemical stage led to the formation of the maximum number of molecular imprints on the film surface. Using the scanning force microscopy, it was found that the reference polymer film had a uniform surface with a small height difference from 1.4 to 2.6 nm

Styles APA, Harvard, Vancouver, ISO, etc.

3

Cao, Nhat Linh, Ol'ga Vasil'yevna Duvanova, Aleksandr Nikolayevich Zyablov, and Anh Tien Nguyen. "APPLICATION OF PIEZOSENSORS BASED ON THE MOLECULARLY IMPRINTED POLYIMIDE FOR DETERMI-NATION OF CAFFEINE IN TEA." chemistry of plant raw material, no. 2 (June 10, 2021): 173–80. http://dx.doi.org/10.14258/jcprm.2021028239.

Texte intégral

Résumé :

In this article the molecularly imprinted polymers (MIPs) have been synthesized on the surface of piezosensors. The starting polymer for MIPs production was polyamic acid, which is a copolymer of 1,2,4,5-benzenetetracarboxylic acid and 4,4′-diaminodiphenyl ether. The caffeine served as the template. The quantum-chemical simulation was performed by the Gaussian 09 software using the DFT method at the B3LYP/6-31G(d,p) level with the basis set superposition error (BSSE) at the preliminary stage of the synthesis of the MIP for caffeine. The prepolymerization complexes were calculated to establish

Styles APA, Harvard, Vancouver, ISO, etc.

4

Kuchmenko, T. A., E. V. Bodrenko, and E. P. Anokhina. "Express analysis of hard alcohol drinks using the “electronic nose” piezosensors arra." Аналитика и контроль 21, no. 3 (2017): 262–73. http://dx.doi.org/10.15826/analitika.2017.21.3.003.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Korenman, Ya I., E. I. Mel’nikova, S. I. Niftaliev, et al. "System of piezosensors for prognostication of the storage life of food products." Russian Journal of Applied Chemistry 82, no. 8 (2009): 1380–83. http://dx.doi.org/10.1134/s1070427209080114.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Khalzova, S. A., D. A. Krivonosova, A. N. Zyablov та O. V. Duvanova. "Determination of E102, E110, Е122, E124 synthetic dyes in soft drinks by modified piezosensors". Аналитика и контроль 21, № 2 (2017): 85–92. http://dx.doi.org/10.15826/analitika.2017.21.2.006.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Chiu, S. S., H. L. W. Chan, S. W. Or, Y. M. Cheung, and P. C. K. Liu. "Effect of electrode pattern on the outputs of piezosensors for wire bonding process control." Materials Science and Engineering: B 99, no. 1-3 (2003): 121–26. http://dx.doi.org/10.1016/s0921-5107(02)00508-1.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Karnaukhov, V. G., V. I. Kozlov, and T. V. Karnaukhova. "Forced vibrations of an anisotropic rectangular plate with piezosensors with account for shear deformations." Reports of the National Academy of Sciences of Ukraine, no. 3 (March 22, 2015): 45–49. http://dx.doi.org/10.15407/dopovidi2015.03.045.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Kuchmenko, T. A., A. A. Shuba, and E. V. Drozdova. "Substantiation of the operating life of gas piezosensors in detection of vapors of organic compounds." Russian Journal of Applied Chemistry 88, no. 12 (2015): 1997–2008. http://dx.doi.org/10.1134/s10704272150120150.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Roh, Chang-Gyun, Hyeonmyeong Jeon, and Bongsoo Son. "Do Heavy Vehicles Always Have a Negative Effect on Traffic Flow?" Applied Sciences 11, no. 12 (2021): 5520. http://dx.doi.org/10.3390/app11125520.

Texte intégral

Résumé :

The purpose of this study is to analyze the effect of heavy vehicles on traffic flow on a two-lane highway. To achieve this goal, data was obtained from piezosensors on the Seoul–Chuncheon Expressway. Analysis of the data showed that, as everyone knows, the average speed of traffic flows decreases as the proportion of heavy vehicles increases. However, not only the speed decreased, but the speed deviation between vehicles decreased. In other words, it was found that within the traffic group that formed the same platoon, individual vehicles were forced to form similar speeds, resulting in a hom

Styles APA, Harvard, Vancouver, ISO, etc.

11

Kuchmenko, T. A., and Yu A. Asanova. "Use of piezosensors for determining the composition of the equilibrium gas phase of aqueous protein solutions." Russian Journal of Applied Chemistry 82, no. 7 (2009): 1188–94. http://dx.doi.org/10.1134/s1070427209070064.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

12

Cao Nhat Linh, O. V. Duvanova, S. Yu Nikitina, and A. N. Zyablov. "The Use of Piezosensors for Determination of Carboxylic Acids in the Intermediate Products of Edible Ethanol Production." Inorganic Materials 56, no. 14 (2020): 1379–83. http://dx.doi.org/10.1134/s0020168520140083.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

13

Rusanova, T. Yu, A. V. Kalach, S. S. Rumyantseva, S. N. Shtykov, and I. S. Ryzhkina. "Determination of volatile organic compounds using piezosensors modified with the Langmuir-Blodgett films of calix[4]resorcinarene." Journal of Analytical Chemistry 64, no. 12 (2009): 1270–74. http://dx.doi.org/10.1134/s1061934809120120.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

Linn, Cao Nhat, Olga V. Duvanova, Svetlana Yu Nikitina, and Alexander N. Zyablov. "THE USE OF PIEZOSENSORS FOR DETERMINATION OF CARBOXYLIC ACIDS IN THE INTERMEDIATE PRODUCTS OF EDIBLE ETHANOL PRODUCTION." Industrial laboratory. Diagnostics of materials 85, no. 4 (2019): 11–16. http://dx.doi.org/10.26896/1028-6861-2019-85-4-11-16.

Texte intégral

Résumé :

The reference polymers and polymers with molecular imprints of carboxylic acids (MIPs-CA) — propionic (MlP-Propionic) and butyric (MIP-Butyric) acids — were synthesized on the surface of piezoelectric sensors using aromatic compounds by the non-covalent imprinting method. Molecularly imprinted polymer (MIP) is a polymer produced through molecular imprinting, which leaves cavities in the polymer matrix with affinity to a chosen "template" target molecule. The values of the imprinting factor and selectivity coefficients were calculated to assess the ability of MIPs-CA to recognize the target mol

Styles APA, Harvard, Vancouver, ISO, etc.

15

Balamurugan, V., and S. Narayanan. "A piezolaminated composite degenerated shell finite element for active control of structures with distributed piezosensors and actuators." Smart Materials and Structures 17, no. 3 (2008): 035031. http://dx.doi.org/10.1088/0964-1726/17/3/035031.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

16

de Marchi, Luca, Nicola Testoni, Alessandro Perelli, and Alessandro Marzani. "Extension of Lamb Waves Defect Location Techniques to the Case of Low Power Excitation by Compressing Chirped Interrogating Pulses." Key Engineering Materials 569-570 (July 2013): 940–47. http://dx.doi.org/10.4028/www.scientific.net/kem.569-570.940.

Texte intégral

Résumé :

In this work a signal processing algorithm for Lamb waves based defect detection/localization procedures is proposed. In particular, the proposed signal processing allows active-passive networks of piezosensors to use chirp shaped pulses in actuation, instead of classically applied spiky pulses. Thus, defect detection/localization can be achieved by using low power voltages in actuation. Basically, the proposed processing is capable to compensate the acquired time-waveforms from the dispersion due to the traveled distance as well as to compress the additional pulse spreading due to the chirp a

Styles APA, Harvard, Vancouver, ISO, etc.

17

De Marchi, Luca, Alessandro Ceruti, Alessandro Marzani, and Alfredo Liverani. "Augmented Reality to Support On-Field Post-Impact Maintenance Operations on Thin Structures." Journal of Sensors 2013 (2013): 1–10. http://dx.doi.org/10.1155/2013/619570.

Texte intégral

Résumé :

This paper proposes an augmented reality (AR) strategy in which a Lamb waves based impact detection methodology dynamically interacts with a head portable visualization device allowing the inspector to see the estimated impact position (with its uncertainty) and impact energy directly on the plate-like structure. The impact detection methodology uses a network of piezosensors bonded on the structure to be monitored and a signal processing algorithm (the Warped Frequency Transform) able to compensate for dispersion the acquired waveforms. The compensated waveforms yield to a robust estimation o

Styles APA, Harvard, Vancouver, ISO, etc.

18

Du, Lei, Qiao Sun, Changqing Cai, Yue Zhang, and Hongbo Hu. "Antenna Beamwidths of Above-The-Road Radar for Traffic Speed Enforcement in China." International Journal of Antennas and Propagation 2012 (2012): 1–9. http://dx.doi.org/10.1155/2012/492326.

Texte intégral

Résumé :

Above-The-Road (AbTR) radar is a new type of speed measurement device used in China for traffic speed enforcement. The antenna beamwidths in vertical and horizontal directions are critical parameters for AbTR radar because speed measurement accuracy partly depends on vertical beamwidth and speed measurement interference from adjacent lanes can be effectively minimized by appropriate choice of horizontal beamwidth. In this paper, the speed measurement principle of AbTR radar is introduced and the reason for field speed measurement error is presented. The speed measurement error is theoretically

Styles APA, Harvard, Vancouver, ISO, etc.

19

Kuchmenko, T. A., A. A. Shuba, D. A. Menzhulina, A. A. Volkova, V. A. Vecherkin, and J. V. Cornejo Tueros. "On a Correlation between the Results of In-Hospital Analysis of Biosamples from Children Performed Using Standard Methods and an Array of Piezosensors." Journal of Analytical Chemistry 77, no. 3 (2022): 376–87. http://dx.doi.org/10.1134/s1061934822010087.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

20

Karnaukhov, V. G., V. I. Kozlov, and T. V. Karnaukhova. "Forced resonant vibrations and the vibroheating of a hinged viscoelastic plate with piezosensors with regard for a geometrical nonlinearity and transverse shear strains." Reports of the National Academy of Sciences of Ukraine, no. 11 (November 17, 2017): 37–43. http://dx.doi.org/10.15407/dopovidi2017.11.037.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Linh, Cao Nhat, Alexander N. Zyablov, Olga V. Duvanova, and Vladimir F. Selemenev. "SORPTION OF CARBOXYLIC ACIDS BY MOLECULARLY IMPRINTED POLYMERS." IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA 63, no. 2 (2020): 71–76. http://dx.doi.org/10.6060/ivkkt.20206302.6071.

Texte intégral

Résumé :

Molecularly imprinted polymers were synthesized as selective coatings of piezoelectric sensors for determination of carboxylic acids in the intermediate fractions of rectified ethanol. Molecularly imprinted polymers were obtained by reorganizing and imidizing polyamic acid chains in N,N-dimethylformamide in the presence of a template by the non-covalent imprinting method. The ability of molecularly imprinted polymers to recognize the target templates was evaluated by studying their sorption properties in comparison with non-imprinted polymers using direct conductometry in static mode. The equi

Styles APA, Harvard, Vancouver, ISO, etc.

22

Gischig, Valentin Samuel, Joseph Doetsch, Hansruedi Maurer, et al. "On the link between stress field and small-scale hydraulic fracture growth in anisotropic rock derived from microseismicity." Solid Earth 9, no. 1 (2018): 39–61. http://dx.doi.org/10.5194/se-9-39-2018.

Texte intégral

Résumé :

Abstract. To characterize the stress field at the Grimsel Test Site (GTS) underground rock laboratory, a series of hydrofracturing and overcoring tests were performed. Hydrofracturing was accompanied by seismic monitoring using a network of highly sensitive piezosensors and accelerometers that were able to record small seismic events associated with metre-sized fractures. Due to potential discrepancies between the hydrofracture orientation and stress field estimates from overcoring, it was essential to obtain high-precision hypocentre locations that reliably illuminate fracture growth. Absolut

Styles APA, Harvard, Vancouver, ISO, etc.

23

Kuchmenko, T. A., and J. N. Bosikova. "Application of artificial smell systems for bakery products state monitoring." Proceedings of the Voronezh State University of Engineering Technologies 81, no. 3 (2019): 125–31. http://dx.doi.org/10.20914/2310-1202-2019-3-125-131.

Texte intégral

Résumé :

Examples of the integrated analytical system "electronic nose" use to discover early signs of bakery products deterioration are studied in the article. The development of physical and chemical analysis methods goes along the path of samples composition differentiating and making decisions on the components set content that determine the product safety and quality. However, the differentiation and descriptor assessment of the integral organoleptic properties, especially of smell and taste, does not reflect the product true state. The development of innovative methods is based on the approximati

Styles APA, Harvard, Vancouver, ISO, etc.

24

Pan’kov, A. A. "Indicator polymer coating with built-in fiber optic piezosensor." IOP Conference Series: Materials Science and Engineering 1029 (January 19, 2021): 012072. http://dx.doi.org/10.1088/1757-899x/1029/1/012072.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

25

De Boe, Pascal, and Jean-Claude Golinval. "Principal Component Analysis of a Piezosensor Array for Damage Localization." Structural Health Monitoring: An International Journal 2, no. 2 (2003): 137–44. http://dx.doi.org/10.1177/1475921703002002005.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

26

Yanchich, V. V. "RESEARCH OF ELECTROMECHANICAL TRANSDUCER’S FASTENING INFLUENCE TO THE ACCELERATION PIEZOSENSOR’S CHARACTERISTICS." IZVESTIYA SFedU. ENGINEERING SCIENCES, no. 2 (July 1, 2021): 130–40. http://dx.doi.org/10.18522/2311-3103-2021-2-130-140.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

27

Kuchmenko, T. A., R. U. Umarkhanov, Zh Yu Kochetova, and N. V. Bel’skikh. "Development of a piezosensor-based transducer, gas analyzer, and ammonia detector." Journal of Analytical Chemistry 67, no. 11 (2012): 930–37. http://dx.doi.org/10.1134/s106193481211007x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

28

Kotchetova, Zh Yu, T. A. Kuchmenko, and O. V. Bazarsky. "Rapid assessment of soil pollution with kerosene using a carbon-nanotube-based piezosensor." Moscow University Chemistry Bulletin 72, no. 1 (2017): 63–68. http://dx.doi.org/10.3103/s0027131417010084.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

29

Langlois, E. D., G. A. Shaw, J. A. Kramar, J. R. Pratt, and D. C. Hurley. "Spring constant calibration of atomic force microscopy cantilevers with a piezosensor transfer standard." Review of Scientific Instruments 78, no. 9 (2007): 093705. http://dx.doi.org/10.1063/1.2785413.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

30

Zyablov, A. N., A. V. Kalach, Yu A. Zhibrova, V. F. Selemenev, and O. V. D’yakonova. "Determination of glycine in aqueous solutions using a molecularly imprinted polymer-modified piezosensor." Journal of Analytical Chemistry 65, no. 1 (2010): 91–93. http://dx.doi.org/10.1134/s106193481001017x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

31

Pan’kov, A. A. "Diagnostics of gradient strains field in polymer composite material with built-in fiber optic piezosensor." IOP Conference Series: Materials Science and Engineering 1029 (January 19, 2021): 012063. http://dx.doi.org/10.1088/1757-899x/1029/1/012063.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

32

Ali, Reem Sami, Sahar Abdul Aziz Mohammed, and Asmaa Hadi Mohammed. "Synthesis of ZnO and CdO thin film on PSi substrate using ElectroChemical Methodology for piezosensor." IOP Conference Series: Materials Science and Engineering 928 (November 19, 2020): 072154. http://dx.doi.org/10.1088/1757-899x/928/7/072154.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

33

Kuchmenko, T. A., R. P. Lisitskaya, and V. S. Shabel’skii. "Using a Piezosensor-Based “Electronic Nose” for Establishing the Adulteration of Gasoline with Different Octane Numbers." Journal of Analytical Chemistry 77, no. 2 (2022): 206–15. http://dx.doi.org/10.1134/s106193482202006x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Raza, Shoaib, MD Jabir, Abhishek Kumar, Adnan ., and Goutam Roy. "Study of the Effects of a Crack in Statically Loaded Structural Elements with the Aid of Piezosensor." Reason-A Technical Journal 18 (July 1, 2019): 9. http://dx.doi.org/10.21843/reas/2019/9-15/196161.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

Kochetova, Zh Yu, Т. А. Kuchmenko, A. F. Sidorkin, and A. A. Kravchenko. "PIEZOSENSORY DETECTION OF CARBONIC ACIDS IN THE GAS MOTOR OIL PHASE FOR EXPRESS EVALUATION OF THE DEGREE OF ITS PROCESSING." Scientific and Technical Volga region Bulletin 7, no. 6 (2017): 64–67. http://dx.doi.org/10.24153/2079-5920-2017-7-6-64-67.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

36

Dragan, Krzysztof, Michal Dziendzikowski, Tadeusz Uhl, and Tadeusz Stepinski. "Remote Monitoring of Fatigue Cracks Growth in the Aircraft Structure Based on Active Piezosensor Network during the Full Scale Fatigue Test." Key Engineering Materials 588 (October 2013): 249–56. http://dx.doi.org/10.4028/www.scientific.net/kem.588.249.

Texte intégral

Résumé :

One of the major issues from a structural integrity point of view of the aircraft structure is an appropriate health monitoring technology delivery for the damage tolerant philosophy. This paper presents a development of a system for fatigue crack growth monitoring and early damage detection in the PZL 130 ORLIK TC II turbo-prop military trainer aft structure. The maintenance system of the aircraft shifts from the safe-life to the hard-time. The aircraft started Full Scale Fatigue Test (FSFT) which will continue up to 2013. In the article a built block approach for the system design, signal mo

Styles APA, Harvard, Vancouver, ISO, etc.

37

Linh, Cao Nhat, О. V. Duvanova, and A. N. Zyablov. "Application of a molecularly imprinted polymer based on the polyimide as a piezosensor selective coating for determining the oleic acid in oils." Аналитика и контроль 23, no. 1 (2019): 120–27. http://dx.doi.org/10.15826/analitika.2019.23.1.006.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Georgi, Patrick, Ssrah Eschelbacher, Thomas Stehle, and Hans-Christian Möhring. "Erfahrungen mit alternativen Kraftmessungen/Experiences with alternative force measurements - Comparing sensor-integrated toolholders to traditional piezo-based measurement technology." wt Werkstattstechnik online 110, no. 01-02 (2020): 24–31. http://dx.doi.org/10.37544/1436-4980-2020-01-02-26.

Texte intégral

Résumé :

Die Prozessüberwachung spielt in der Zerspanung eine immer wichtiger werdende Rolle. So können zum Beispiel mittels Zerspankraftmessungen ökonomisch optimierte Parameter in Zerspanprozessen gefunden werden, die zu einer Verbesserung der Auslastung von Werkzeug und Maschine führen. Des Weiteren kann über die Zerspankraft auf den aktuellen Verschleißzustand der Werkzeuge im Prozess sowie auf die jeweils erreichbare Bearbeitungsgenauigkeit zurückgeschlossen werden. Für Zerspankraftmessungen gibt es eine Vielzahl an zur Verfügung stehenden Kraftmesssystemen; zum einen traditionelle Messtechnik auf

Styles APA, Harvard, Vancouver, ISO, etc.

39

Merenkova, A. A., K. V. Zhuzhukin, A. N. Zyablov, and L. I. Belchinskaya. "Determination of formaldehyde in production solutions using the piezoelectric sensors." Аналитика и контроль 25, no. 2 (2021): 140–45. http://dx.doi.org/10.15826/analitika.2021.25.2.003.

Texte intégral

Résumé :

In the current work, piezoelectric sensors based on a molecular imprinted polymer (MIP) were obtained for determining the formaldehyde in the industrial solutions of a woodworking plant. The synthesis was carried out directly on the surface of the piezoelectric sensor. In the process of the two-stage thermoimidization of the obtained prepolymerization mixture, a molecular imprinted polyimide of formaldehyde was formed. For the analysis of the supra-resin part of the effluent of the Grafskaya kuhnya LLC (Voronezh) woodworking enterprise, which was obtained by the dry distillation of wood, the m

Styles APA, Harvard, Vancouver, ISO, etc.

40

"DETERMINATION OF POTASSIUM SORBATE AND SODIUM BENZOATE IN NON-ALCOHOLIC DRINKS WITH PIEZOSENSORS BASED ON MOLECULAR-IMPRINTED POLYMERS." ChemChemTech 65, no. 10 (2022): 14–20. http://dx.doi.org/10.6060/ivkkt.20226510.6584.

Texte intégral

Résumé :

Preservatives such as potassium sorbate and sodium benzoate are commonly used in the food industry. It is necessary to control the content of preservatives in food products, because exceeding the permissible limit of the concentration can affect human health. To determine the contents of potassium sorbate and sodium benzoate in non-alcoholic drinks, a piezoelectric sensor based on molecularly imprinted polymers (MIPs) was used. Molecularly imprinted polymers were synthesized by copolymer of dianhydride 1,2,4,5-benzenetetracarboxylic acid with 4,4'-diaminodiphenyl oxide in N,N-dimethylformamide

Styles APA, Harvard, Vancouver, ISO, etc.

41

Marzo, Gaia, Vincenzo M. Mastronardi, Luciana Algieri, et al. "Sustainable, Flexible, and Biocompatible Enhanced Piezoelectric Chitosan Thin Film for Compliant Piezosensors for Human Health." Advanced Electronic Materials, March 11, 2022, 2200069. http://dx.doi.org/10.1002/aelm.202200069.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

42

Kundu, Kusumita, Arnab Ghosh, Shewli Pratihar, Shiv Govind Singh, Tarun Kumar Kayal, and Rajat Banerjee. "Boron doped SiC thin film on Silicon synthesized from polycarbosilane: a new lead free material for applications in piezosensors." Journal of Materials Science: Materials in Electronics, September 13, 2021. http://dx.doi.org/10.1007/s10854-021-06966-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

43

de Marzo, Gaia, Vincenzo M. Mastronardi, Luciana Algieri, et al. "Sustainable, Flexible, and Biocompatible Enhanced Piezoelectric Chitosan Thin Film for Compliant Piezosensors for Human Health (Adv. Electron. Mater. 9/2023)." Advanced Electronic Materials 9, no. 9 (2023). http://dx.doi.org/10.1002/aelm.202370041.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

44

Quinsaat, Jose Enrico Q., Iurii Burda, Ronny Krämer, et al. "Conductive silicone elastomers electrodes processable by screen printing." Scientific Reports 9, no. 1 (2019). http://dx.doi.org/10.1038/s41598-019-49939-8.

Texte intégral

Résumé :

Abstract Conductive inks consisting of graphene and carbon black conductive fillers into a polydimethylsiloxane (PDMS) matrix, which can be processed into thin films by screen printing are developed. The influence of filler composition and content on mechanical and electrical properties of the conductive composites is investigated. The best composites were evaluated as electrode material for dielectric elastomer actuators and for piezoelectric sensors. With increasing filler content, the electrical properties of the resulting composites of graphite nanoplates (GNPs) or a binary mixture of GNPs

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!