Se connecter

Bibliographies thématiques / Power amplifiers / Thèses

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Power amplifiers.

Thèses sur le sujet « Power amplifiers »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 25 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Power amplifiers ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.

1

Shao, Jin. "Advanced Power Amplifiers Design for Modern Wireless Communication." Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc804973/.

Texte intégral

Résumé :

Modern wireless communication systems use spectrally efficient modulation schemes to reach high data rate transmission. These schemes are generally involved with signals with high peak-to-average power ratio (PAPR). Moreover, the development of next generation wireless communication systems requires the power amplifiers to operate over a wide frequency band or multiple frequency bands to support different applications. These wide-band and multi-band solutions will lead to reductions in both the size and cost of the whole system. This dissertation presents several advanced power amplifier solut

Styles APA, Harvard, Vancouver, ISO, etc.

2

Lee, Ockgoo. "High efficiency switching CMOS power amplifiers for wireless communications." Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/37145.

Texte intégral

Résumé :

High-efficiency performance is one of the most important requirements of power amplifiers (PAs) for wireless applications. However, the design of highly efficient CMOS PAs for watt-level applications is a challenging task. This dissertation focuses on the development of the design method for highly efficient CMOS PAs to overcome the fundamental difficulties presented by CMOS technology. In this dissertation, the design method and analysis for a high-power and highefficiency class-E CMOS PA with a fully integrated transformer have been presented. This work is the first effort to set up a compre

Styles APA, Harvard, Vancouver, ISO, etc.

3

Hur, Joonhoi. "A highly linear and efficient out-phasing transmitter for multi-band, multi-mode applications." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/42823.

Texte intégral

Résumé :

There have been many efforts to improve efficiency of transmitter while meeting stringent linearity requirement of modern communication system. Among the technology to enhance efficiency of linear transmitter, the out-phasing technologies, also called the linear amplification with nonlinear components (LINC), is considered as a promising technology. LINC has been studied long times, since it provides excellent linearity with high efficiency by allowing adopt high efficient switch-mode power amplifiers. However, The LINC transmitter has some technical challenges: linearity degradation due to am

Styles APA, Harvard, Vancouver, ISO, etc.

4

Al, Tanany Ahmed. "A Study of Switched Mode Power Amplifiers using LDMOS." Thesis, University of Gävle, Department of Technology and Built Environment, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-701.

Texte intégral

Résumé :

<p>This work focuses on different kinds of Switch Mode Power Amplifiers (SMPAs) using LDMOS technologies. It involves a literature study of different SMPA concepts. Choosing the suitable class that achieves the high efficiency was the base stone of this</p><p>work. A push-pull class J power amplifier (PA) was designed with an integrated LC resonator inside the package using the bondwires and die capacitances. Analysis and motivation of the chosen class is included. Designing the suitable Input/Output printed circuit board (PCB) external circuits (i.e.; BALUN circuit, Matching network and DC</p

Styles APA, Harvard, Vancouver, ISO, etc.

5

Bell, Patrick J. "MEMS-reconfigurable microwave power amplifiers." Diss., Connect to online resource, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3219036.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Mutha, Shashank. "Adaptive Linearization of Power Amplifiers." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1244049195.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Yousefzadeh, Vahid. "Digitally controlled power converters for RF power amplifiers." Diss., Connect to online resource, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3219220.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Gray, Blake Raymond. "Design of RF and microwave parametric amplifiers and power upconverters." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/43613.

Texte intégral

Résumé :

The objective of this research is to develop, characterize, and demonstrate novel parametric architectures capable of wideband operation while maintaining high gain and stability. To begin the study, phase-incoherent upconverting parametric amplifiers will be explored by first developing a set of analytical models describing their achievable gain and efficiency. These models will provide a set of design tools to optimize and evaluate prototype circuit boards. The prototype boards will then be used to demonstrate their achievable gain, bandwidth, efficiency, and stability. Further investiga

Styles APA, Harvard, Vancouver, ISO, etc.

9

Lehtisalo, V. (Ville). "Average power tracking optimization system for LTE power amplifiers." Master's thesis, University of Oulu, 2014. http://jultika.oulu.fi/Record/nbnfioulu-201409171871.

Texte intégral

Résumé :

Abstract. This thesis introduces the design and implementation of an optimization system for average power tracking, used in the RF power amplifier of LTE mobile device. Average power tracking adjusts the supplied voltage of the power amplifier according to output power level so that the linearity of the power amplifier is maintained while the efficiency is improved. The optimization system is implemented with computer controlled measurement equipment setup. The setup consists of an RF signal generator, a power meter and a spectrum analyzer. Performance measurements are performed to the dev

Styles APA, Harvard, Vancouver, ISO, etc.

10

Al-Tahir, Hibah. "Multidimensional Measurements : on RF Power Amplifiers." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-729.

Texte intégral

Résumé :

<p>Abstract</p><p>In this thesis, a measurement system was set to perform comprehensive measurements on RF power amplifiers. Data obtained from the measurements is then processed mathematically to obtain three dimensional graphs of the basic parameters affected or generated by nonlinearities of the amplifier i.e. gain, efficiency and distortion. Using a class AB amplifier as the DUT, two sets of signals – both swept in power level and frequency - were generated to validate the method, a two-tone signal and a WCDMA signal. The three dimensional plot gives a thorough representation of the behavi

Styles APA, Harvard, Vancouver, ISO, etc.

11

Condo, Neira Edith Graciela. "Multidimensional Measurements on RF Power Amplifiers." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-804.

Texte intégral

Résumé :

<p>Measurements are important to specify and verify properties for components, modules and systems. The specifications for a certain figure of merit are usually given in a numerical value or a two dimensional plot. However, there are some devices, like power amplifiers with certain figure of merits that depends on two or more working conditions, requiring a three dimensional plot.</p><p>This thesis presents a measurement method including graphical user interface of three parameters gain, efficiency and distortion when two-tone or WCDMA signals are used as an input to the PA.</p>

Styles APA, Harvard, Vancouver, ISO, etc.

12

McRory, John Godfrey. "Stacked GaAs FET RF power amplifiers." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0002/NQ31049.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

13

Mahdavi, Sareh. "RF power amplifiers and MEMS varactors." Thesis, McGill University, 2007. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=112576.

Texte intégral

Résumé :

This thesis is concerned with the design and implementation of radio frequency (RF) power amplifiers and micro-electromechanical systems---namely MEMS varactors. This is driven by the many wireless communication systems which are constantly moving towards increased integration, better signal quality, and longer battery life.<br>The power amplifier consumes most of the power in a receiver/transmitter system (transceiver), and its output signal is directly transmitted by the antenna without further modification. Thus, optimizing the PA for low power consumption, increased linearity, and compact

Styles APA, Harvard, Vancouver, ISO, etc.

14

Zewani, Mohammed. "Low distortion wideband microwave power amplifiers." Thesis, University of Leeds, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.440631.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Phạm, Anh D. 1974. "Biasing techniques for linear power amplifiers." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/87274.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

16

Phạm, Anh D. 1974. "Outphase power amplifiers in OFDM systems." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/35285.

Texte intégral

Résumé :

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, February 2006.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Includes bibliographical references (leaves 93-95).<br>A trade-off between linearity and efficiency exists in conventional power amplifiers. The outphase amplifying concept overcomes this trade-off by enabling the use of high efficiency, non-linear power amplifiers for linear amplification. An amplitude modulated signal

Styles APA, Harvard, Vancouver, ISO, etc.

17

Smith, Robert Martin. "Broadband microwave push-pull power amplifiers." Thesis, Cardiff University, 2013. http://orca.cf.ac.uk/58895/.

Texte intégral

Résumé :

The research work presented in this thesis aims to achieve high-power, high-efficiency amplification across substantial bandwidths at microwave frequencies. The push-pull topology was identified as a promising possible solution which had previously not been considered for this application. The key component in the push-pull power amplifier is the balun, which converts between balanced and unbalanced signal environments. The novel use of ferrite materials allowed the half-wavelength resonance of a coaxial-cable transmission line balun to be suppressed, greatly extending its bandwidth. This was

Styles APA, Harvard, Vancouver, ISO, etc.

18

Tomé, Pedro Mirassol. "Analog neural predistortion of power amplifiers." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/17166.

Texte intégral

Résumé :

Mestrado em Engenharia Electrónica e Telecomunicações<br>As especificações das redes de telecomunicações de quinta geração ultrapassam largamente as capacidades das técnicas mais modernas de linearização de amplificadores de potência como a pré-distorção digital. Por esta razão, esta tese propõe um método de linearização alternativo: um prédistorçor analógico, à banda base, constituído por uma rede neuronal artificial. A rede foi treinada usando três métodos distintos: avaliação de política através de TD(λ), otimização por estratégias de evolução como CMA-ES, e um algoritmo original de

Styles APA, Harvard, Vancouver, ISO, etc.

19

Wang, Chengzhou. "CMOS power amplifiers for wireless communications /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2003. http://wwwlib.umi.com/cr/ucsd/fullcit?p3112826.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

20

An, Kyu Hwan. "CMOS RF power amplifiers for mobile wireless communications." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31717.

Texte intégral

Résumé :

Thesis (Ph.D)--Electrical and Computer Engineering, Georgia Institute of Technology, 2010.<br>Committee Chair: Laskar, Joy; Committee Member: Cressler, John; Committee Member: Kohl, Paul; Committee Member: Kornegay, Kevin; Committee Member: Tentzeris, Emmanouil. Part of the SMARTech Electronic Thesis and Dissertation Collection.

Styles APA, Harvard, Vancouver, ISO, etc.

21

Kim, Hyun-Woong. "CMOS RF transmitter front-end module for high-power mobile applications." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/47592.

Texte intégral

Résumé :

With the explosive growth of the wireless market, the demand for low-cost and highly-integrated radio frequency (RF) transceiver has been increased. Keeping up with this trend, complimentary metal-oxide-semiconductor (CMOS) has been spotlighted by virtue of its superior characteristics. However, there are challenges in achieving this goal, especially designing the transmitter portion. The objective of this research is to demonstrate the feasibility of fully integrated CMOS transmitter module which includes power amplifier (PA) and transmit/receive (T/R) switch by compensating for the intrinsic

Styles APA, Harvard, Vancouver, ISO, etc.

22

Fedorenko, Pavlo. "Phase distortion in envelope elimination and restoration radio frequency power amplifiers." Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/34822.

Texte intégral

Résumé :

The objective of this research is to analyze and improve linearity of envelope elimination and restoration (EER) radio frequency (RF) power amplifiers. Envelope elimination and restoration was compared to other efficiency enhancement techniques and determined to likely be the most suitable solution for implementation of multimode, multiband portable RF transmitters. Distortion, stemming from dynamic power-supply modulation of RF transistors in EER RF power amplifiers was identified as one of the key challenges to the development of commercially viable EER transmitters. This dissertation presen

Styles APA, Harvard, Vancouver, ISO, etc.

23

Connor, Mark Anthony. "Design of Power-Scalable Gallium Nitride Class E Power Amplifiers." University of Dayton / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1405437893.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

24

Lotter, Paul. "Development of feedforward RF power amplifier." Thesis, Cape Peninsula University of Technology, 2006. http://hdl.handle.net/20.500.11838/2206.

Texte intégral

Résumé :

Thesis (MTech(Electrical Engineering))--Cape Peninsula University of Technology, 2006.<br>Electronic communication systems have become an integral part of our everyday lives. RF (Radio Frequency) power amplifiers form part of the fundamental building blocks of an electronic communication system. RF power amplifiers can also be one of the major causes of distortion in an electronic communication system. This thesis describes the linearity requirement for a RF power amplifier that is used in a transmitter section of an electronic communication system. Furthermore, five different linearisat

Styles APA, Harvard, Vancouver, ISO, etc.

25

Raich, Raviv. "Nonlinear system identification and analysis with applications to power amplifier modeling and power amplifier predistortion." Diss., Available online, Georgia Institute of Technology, 2004:, 2004. http://etd.gatech.edu/theses/available/etd-04072004-130800/unrestricted/raich%5Fraviv%5F200405%5Fphd.pdf.

Texte intégral

Résumé :

Thesis (Ph. D.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2004.<br>Xiaoming Huo, Committee Member ; J. Stevenson Kenney, Committee Member ; Douglas Williams, Committee Member ; Erik Verriest, Committee Member ; G. Tong Zhou, Committee Chair. Vita. Includes bibliographical references (leaves 170-179).

Styles APA, Harvard, Vancouver, ISO, etc.

26

Nagarajan, Preeti. "Design of Power Amplifier Test Signals with a User-Defined Multisine." Thesis, University of North Texas, 2004. https://digital.library.unt.edu/ark:/67531/metadc4454/.

Texte intégral

Résumé :

Cellular radio communication involves wireless transmission and reception of signals at radio frequencies (RF). Base stations house equipment critical to the transmission and reception of signals. Power amplifier (PA) is a crucial element in base station assembly. PAs are expensive, take up space and dissipate heat. Of all the elements in the base station, it is difficult to design and operate a power amplifier. New designs of power amplifiers are constantly tested. One of the most important components required to perform this test successfully is a circuit simulator model of an entire communi

Styles APA, Harvard, Vancouver, ISO, etc.

27

Srirattana, Nuttapong. "High-Efficiency Linear RF Power Amplifiers Development." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6899.

Texte intégral

Résumé :

Next generation mobile communication systems require the use of linear RF power amplifier for higher data transmission rates. However, linear RF power amplifiers are inherently inefficient and usually require additional circuits or further system adjustments for better efficiency. This dissertation focuses on the development of new efficiency enhancement schemes for linear RF power amplifiers. The multistage Doherty amplifier technique is proposed to improve the performance of linear RF power amplifiers operated in a low power level. This technique advances the original Doherty amplifier sche

Styles APA, Harvard, Vancouver, ISO, etc.

28

Fritzin, Jonas. "CMOS RF Power Amplifiers for Wireless Communications." Doctoral thesis, Linköpings universitet, Elektroniska komponenter, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-71852.

Texte intégral

Résumé :

The wireless market has experienced a remarkable development and growth since the introduction of the first modern mobile phone systems, with a steady increase in the number of subscribers, new application areas, and higher data rates. As mobile phones and wireless connectivity have become consumer mass markets, the prime goal of the IC manufacturers is to provide low-cost solutions. The power amplifier (PA) is a key building block in all RF transmitters. To lower the costs and allow full integration of a complete radio System-on-Chip (SoC), it is desirable to integrate the entire transceiver

Styles APA, Harvard, Vancouver, ISO, etc.

29

Sowlati, Hashjani Tirdad. "Class E power amplifiers for wireless communications." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ28305.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

30

Doyama, Jason. "Class E power amplifiers for wireless transceivers." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0015/MQ45854.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

31

Wisell, David. "Measurement Techniques for Characterization of Power Amplifiers." Doctoral thesis, Stockholm : KTH School of Electrical Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4566.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

32

Stacey, Craig D. "High power amplification with optical fibre amplifiers." Thesis, Heriot-Watt University, 2007. http://hdl.handle.net/10399/92.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

33

Rule, John Eric. "Gain and phase equalisation of power amplifiers." Thesis, University of Leeds, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.400154.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Burrow, Stephen George. "Low power, high efficiency Class D amplifiers." Thesis, University of Bristol, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.271779.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

FIGUEIREDO, TIAGO NASCIMENTO DE. "BROADBAND RF POWER AMPLIFIERS FOR MULTIBAND TRANSCEPTORS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2012. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=22900@1.

Texte intégral

Résumé :

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>Este trabalho descreve o desenvolvimento completo de um Amplificador de Potência de RF para Transceptores Multibanda. Em sua etapa inicial mostra um apanhado geral da teoria de todos os parâmetros relevantes para a medida de desempenho desses dispositivos, como potência, ganho e parâmetros de não linearidades. Em seguida são expostas as teorias básicas para o entendimento dos mecanismos para extração da máxima potência de um transistor, focando nos transistores de efeito de campo FET, incluindo a caracterização para regimes de alta potência

Styles APA, Harvard, Vancouver, ISO, etc.

36

Xiao, Ming. "Novel predistortion techniques for RF power amplifiers." Thesis, University of Birmingham, 2009. http://etheses.bham.ac.uk//id/eprint/510/.

Texte intégral

Résumé :

As the mobile phone is an essential accessory for everyone nowadays, predistortion for the RF power amplifiers in mobile phone systems becomes more and more popular. Especially, new predistortions for power amplifiers with both nonlinearities and memory effects interest the researchers. In our thesis, novel predistortion techniques are presented for this purpose. Firstly, we improve the digital injection predistortion in the frequency domain. Secondly, we are the first authors to propose a novel predistortion, which combines digital LUT (Look-up Table) and injection. These techniques are appli

Styles APA, Harvard, Vancouver, ISO, etc.

37

Arumilli, Gautham Venkat. "RF breakdown effects in microwave power amplifiers." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/45612.

Texte intégral

Résumé :

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Includes bibliographical references (p. 95-98).<br>Electrical stresses in the transistors of high-efficiency switching power amplifiers can lead to hot-electron-induced "breakdown" in these devices. This thesis explores issues related to breakdown in the Transcom TC2571 PHEMT, and the effects this has on the Draper Laboratory 2.

Styles APA, Harvard, Vancouver, ISO, etc.

38

Godoy, Philip (Philip Andrew). "Techniques for high-efficiency outphasing power amplifiers." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68486.

Texte intégral

Résumé :

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 171-177).<br>A trade-off between linearity and efficiency exists in conventional power amplifiers (PAs). The outphase amplifying concept overcomes this trade-off by enabling the use of high efficiency, non-linear power amplifiers for linear amplification. However, the efficiency improvement is limited by the efficiency of the output power combiner. This thesis investigates techniques to overcome t

Styles APA, Harvard, Vancouver, ISO, etc.

39

McIver, Stuart Roderick Arthur. "High power LDMOS L-band radar amplifiers." Thesis, Stellenbosch : University of Stellenbosch, 2010. http://hdl.handle.net/10019.1/4092.

Texte intégral

Résumé :

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010.<br>ENGLISH ABSTRACT: The thesis details the design, construction and experimental evaluation of 30W, 35W and 250W L-Band LDMOS Radar amplifiers. Each amplifier module contains an integrated high speed power supply in order to optimize RF pulse repeatability and to improve radar MTI factor (Moving Target Indication.) As part of the work, a pulsed RF measurement system for measuring the dynamic I-V curves of a power FET was developed. Work was also done on low impedance S-parameter measurement test fixture

Styles APA, Harvard, Vancouver, ISO, etc.

40

Nizamuddin, Muhammad Ali. "Predistortion for Nonlinear Power Amplifiers with Memory." Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/36184.

Texte intégral

Résumé :

<p>The fusion of voice and data applications, along with the demand for high data-rate applications such as video-on-demand, is making radio frequency (RF) spectrum an increasingly expensive commodity for current and future communications. Although bandwidth-efficient digital modulation alleviates part of the problem by requiring a minimal use of spectral resources, they put an extra design burden on RF engineers. RF transmitters and power amplifiers account for more than half the total maintenance cost of a base-station, while occupying nearly the same portion of space. Therefore, powe

Styles APA, Harvard, Vancouver, ISO, etc.

41

Muthukrishnan, Swaminathan. "ESD Protected SiGe HBT RFIC Power Amplifiers." Thesis, Virginia Tech, 2005. http://hdl.handle.net/10919/31705.

Texte intégral

Résumé :

Over the last few decades, the susceptibility of integrated circuits to electrostatic discharge (ESD) induced damages has justified the use of dedicated on-chip protection circuits. Design of robust protection circuits remains a challenging task because ESD failure mechanisms have become more acute as device dimensions continue to shrink. A lack of understanding of the ESD phenomena coupled with the increased sensitivity of smaller devices and time-to-market demands has led to a trial-and-error approach to ESD-protected circuit design. Improved analysis capabilities and a systematic design app

Styles APA, Harvard, Vancouver, ISO, etc.

42

Hall, Andrew D. "Broadband, low-noise and power microwave amplifiers." Master's thesis, University of Cape Town, 1986. http://hdl.handle.net/11427/17613.

Texte intégral

Résumé :

The design of Broadband, Low-Noise and Power Microwave Amplifiers using microstrip softboard technology is investigated. The software program TOUCHSTONE (TM) by EEsof is used extensively as a basic design tool. The characterisation of the GaAs Field Effect Transistors, used for the amplifiers, is carried out. These characterisations are then used by the program in its circuit analysis. A determination of the validity of using the manufacturer's data, for the designs, is determined by comparing it to the measured data. Source-Pull and Load-Pull measurements were performed for the Power GaAs FET

Styles APA, Harvard, Vancouver, ISO, etc.

43

Glaros, Konstantinos N. "Low-power pulse oximetry and transimpedance amplifiers." Thesis, Imperial College London, 2011. http://hdl.handle.net/10044/1/9480.

Texte intégral

Résumé :

This work focuses on the design of low-power fully-integrated pulse oximeter front-ends and transimpedance amplifiers. Mathematical modelling and numerical simulations are employed to systematically quantify the trade-offs involved in the design of such a front-end and investigate the specific challenges arising from the requirements for low- power and full integration. The response speed, stability, power consumption and noise characteristics of the front-end's transimpedance amplifier are identified as significant points of interest. The performance of several transimpedance amplifier topolo

Styles APA, Harvard, Vancouver, ISO, etc.

44

López, Néstor David. "High-efficiency power amplifiers for linear transmitters." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3303889.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

45

Aboukarr, Bakri Carleton University Dissertation Engineering Electrical. "Adaptive predistortion linearization of nonlinear power amplifiers." Ottawa, 1990.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

46

Mishra, Chinmaya. "Design and implementation of low power multistage amplifiers and high frequency distributed amplifiers." Texas A&M University, 2004. http://hdl.handle.net/1969.1/2775.

Texte intégral

Résumé :

The advancement in integrated circuit (IC) technology has resulted in scaling down of device sizes and supply voltages without proportionally scaling down the threshold voltage of the MOS transistor. This, coupled with the increasing demand for low power, portable, battery-operated electronic devices, like mobile phones, and laptops provides the impetus for further research towards achieving higher integration on chip and low power consumption. High gain, wide bandwidth amplifiers driving large capacitive loads serve as error amplifiers in low-voltage low drop out regulators in portable device

Styles APA, Harvard, Vancouver, ISO, etc.

47

Jiang, Xufeng. "Envelope-tracking power supplies for RF power amplifiers in portable applications." Connect to online resource, 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3256446.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

48

Bendig, Rudi Matthew. "AC Power Combining Strategy with Application to Efficient Linear Power Amplifiers." DigitalCommons@CalPoly, 2014. https://digitalcommons.calpoly.edu/theses/1220.

Texte intégral

Résumé :

With the ongoing push for wireless systems to accommodate more users and support higher data rates more efficient modulation schemes have been created that are more advanced than simple FM and AM modulation used for radio broadcasting. These modulation schemes, such as orthogonal frequency division multiplexing (OFDM), suffer from high peak to average power ratios. Standard Class A and Class AB amplifiers cannot simultaneously achieve good linearity and efficiency, and therefore there has been an increase in the development of new topologies to combat this issue. Common features to these circu

Styles APA, Harvard, Vancouver, ISO, etc.

49

Feng, Cheng-Chuan. "Ku-band high power amplifier system functionality and operation." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA236912.

Texte intégral

Résumé :

Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, June 1990.<br>Thesis Advisor(s): Lee, Hung-Mou. Second Reader: Ewing, Gerald D. "June 1990." Description based on signature page. DTIC Identifiers: Power amplifiers, high power, ku band. Author(s) subject terms: High power amplifier system, RF amplifier unit, control unit, high voltage supply unit, cooling unit, modulation unit, system operation, maintenance and troubleshooting procedures. Includes bibliographical references (p. 117). Also available online.

Styles APA, Harvard, Vancouver, ISO, etc.

50

Brand, Konrad Frederik. "The experimental design and characterisation of Doherty power amplifiers." Thesis, Link to the online version, 2006. http://hdl.handle.net/10019.1/2594.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!