Se connecter

Bibliographies thématiques / Power and Technology / Thèses

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Power and Technology.

Thèses sur le sujet « Power and Technology »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Power and Technology ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.

1

Branch, Greg. "Nonlinear pulsed power technology." Thesis, University of Oxford, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386897.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Su, Yu-Hao. "Power Enhancement of Piezoelectric Technology based Power Devices by Using Heat Transfer Technology." Thesis, Cachan, Ecole normale supérieure, 2014. http://www.theses.fr/2014DENS0025/document.

Texte intégral

Résumé :

L’objectif de cette étude est d’améliorer les performances des transformateurs piézoélectriques en terme de courant de sortie et de puissance pour des applications d’alimentation DC/DC, grâce à la gestion de l’échauffement. Le courant de sortie des transformateurs piézoélectriques, et donc la puissance transmise, sont directement liés à la vitesse de vibration qui pour des valeurs élevées engendre des pertes et une forte élévation de température. Cette élévation excessive de la température a comme conséquence le changement des caractéristiques du transformateur et plus particulièrement la dimi

Styles APA, Harvard, Vancouver, ISO, etc.

3

Herrmann, Andrew F. "Organizational Power, Patriarchy, and Technology." Digital Commons @ East Tennessee State University, 2016. https://dc.etsu.edu/etsu-works/794.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Fuller, Robert, Ryan Nastase, Kaoru Elliott, Anas Salhab, and Jonathan Campbell. "Wireless Power Transmission Using Microwave Technology." International Foundation for Telemetering, 2010. http://hdl.handle.net/10150/605913.

Texte intégral

Résumé :

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California<br>As part of the Senior Capstone class held at the University of Arizona in the College of Engineering, the team was tasked to build a prototype that could power a simple electronic device wirelessly. The team succeeded in doing so and has proven that wireless power transmission could be a valuable tool for future use. There are a few difficulties to note and specifics will be give

Styles APA, Harvard, Vancouver, ISO, etc.

5

Kozmin, Kirill. "Technology for accurate and low power measurements /." Luleå, 2004. http://epubl.luth.se/1402-1757/2004/75.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Yeung, Hon-chung, and 楊漢忠. "Clean technology advancement in the power industry." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1997. http://hub.hku.hk/bib/B31253908.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Cutting, Andrew. "Death in Henry James : technology, sacrifice, power." Thesis, Birkbeck (University of London), 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.404484.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Waldron, Niamh 1974. "Strained-Si technology for RF power LDMOSFET." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/87326.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Yeung, Hon-chung. "Clean technology advancement in the power industry /." Hong Kong : University of Hong Kong, 1997. http://sunzi.lib.hku.hk/hkuto/record.jsp?B18734765.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Gholizad, Babak <1980&gt. "Superconducting Technology for Power and Energy Management." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amsdottorato.unibo.it/7279/1/Babak_Gholizad_tesi.pdf.

Texte intégral

Résumé :

In this thesis integration of high temperature superconductor technology in the future advanced power system will be investigated. In particular, superconducting magnetic energy storage system (SMES) for power quality of distribution grid and customer protection will be discussed. The complete design method, including the magnet and power electronic interface design will be discussed in more details. The method will be applied to the design of an industrial scale SMES system. Commercially available high temperature superconductor (HTS) material (YBCO) and magnesium diboride (MgB2) tapes will b

Styles APA, Harvard, Vancouver, ISO, etc.

11

Gholizad, Babak <1980&gt. "Superconducting Technology for Power and Energy Management." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amsdottorato.unibo.it/7279/.

Texte intégral

Résumé :

In this thesis integration of high temperature superconductor technology in the future advanced power system will be investigated. In particular, superconducting magnetic energy storage system (SMES) for power quality of distribution grid and customer protection will be discussed. The complete design method, including the magnet and power electronic interface design will be discussed in more details. The method will be applied to the design of an industrial scale SMES system. Commercially available high temperature superconductor (HTS) material (YBCO) and magnesium diboride (MgB2) tapes will b

Styles APA, Harvard, Vancouver, ISO, etc.

12

Charboneau, Bryan Charles. "Double-Sided Liquid Cooling for Power Semiconductor Devices Using Embedded Power Technology." Thesis, Virginia Tech, 2005. http://hdl.handle.net/10919/31907.

Texte intégral

Résumé :

Power electronics is a constantly growing and demanding technical field. Consumer demand and developing technologies have made the improvement of power density a primary emphasis of research for this area. Power semiconductors present some of the major challenges for increasing system level power density due to high loss density and interconnection requirements. Advanced cooling schemes, such as double-sided, forced liquid convection or multi-phase flow, can be implemented with non-wire bond packaging to improve thermal management while maintaining proper electrical performance. Embedded p

Styles APA, Harvard, Vancouver, ISO, etc.

13

Nilsmo, Oscar, and Ludwig Abrahamsson. "A comparison of wind power and nuclear power." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232559.

Texte intégral

Résumé :

År 2019 och 2020 kommer kärnreaktorerna Ringhals 1 och 2 läggas ner. I Denna rapporten undersöks hur många vindkraftverk som behöver byggas för att ersätta och kompensera för den årliga elproduktionen från reaktorerna i Ringhals. Därefter undersöks; vilka geografiska riksintressen som finns för byggnation av dessa vindkraftverk, vad som avgör om ett område är intressant, åtgång av markyta, skövling av skog, samt i vilken mån vindkraften byggs ut idag. Rapporten undersöker dessutom möjligheten att ersätta reaktorerna i Ringhals med vindkraftverk utifrån att det inte existerar någon reglerkraft

Styles APA, Harvard, Vancouver, ISO, etc.

14

Javary, Michele. "The economics of power." Thesis, University of Sussex, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.285057.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Ansley, Steven R., and Lewis H. Phillips. "The photovoltaic power converter: a technology readiness assessment." Monterey, California. Naval Postgraduate School, 2005. http://hdl.handle.net/10945/10023.

Texte intégral

Résumé :

MBA Professional Report<br>With the DoD moving towards evolutionary acquisition and incremental development of weapons systems and soldier applications, it is important that the maturity of new technologies be properly assessed so that the probability of success, once inserted into a program, can be maximized. The purpose of this report is to examine the Photovoltaic Power Converter (PVPC) technology, developed by Atira Technologies, as a potential Department of Defense Acquisition program/project. Specifically, the report focuses on a Technology Readiness Assessment (TRA). The report validate

Styles APA, Harvard, Vancouver, ISO, etc.

16

Cao, Guangjun. "Physics and technology of silicon RF power devices." Thesis, De Montfort University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.391785.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

17

Adjei-Frimpong, Bernard. "Improving the power bus technology of a nanosatellite." Thesis, Cape Peninsula University of Technology, 2011. http://hdl.handle.net/20.500.11838/2199.

Texte intégral

Résumé :

Thesis (MTech(Electrical Engineering))--Cape Peninsula University of Technology, 2011.<br>The design of nanosatellite power systems plays a major role in micro-sized component development for these spacecrafts. Due to its prospect for future development, industries and universities across the world have accepted them as a teaching tool as well as for conducting space research and development. Since nanosatellite systems have become increasingly popular to commercial companies and research institutions, the need to improve on the power systems has now become a major issue for power system

Styles APA, Harvard, Vancouver, ISO, etc.

18

Mou, Xiaolin. "Wireless power transfer technology for electric vehicle charging." Thesis, Durham University, 2017. http://etheses.dur.ac.uk/12416/.

Texte intégral

Résumé :

In the years 1884-1889, after Nicola Tesla invented "Tesla Coil", wireless power transfer (WPT) technology is in front of the world. WPT technologies can be categorized into three groups: inductive based WPT, magnetic resonate coupling (MRC) based WPT and electromagnetic radiation based WPT. MRC-WPT is advantageous with respect to its high safety and long transmission distance. Thus it plays an important role in the design of wireless electric vehicle (EV) charging systems. The most significant drawback of all WPT systems is the low efficiency of the energy transferred. Most losses happen duri

Styles APA, Harvard, Vancouver, ISO, etc.

19

Wetzel, Matthew A. "Silicon-on-sapphire technology for microwave power applications /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2001. http://wwwlib.umi.com/cr/ucsd/fullcit?p9997569.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

20

Park, Jin-Woo. "Core lamination technology for micromachined power inductive components." Diss., Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-06072004-131319/unrestricted/park%5Fjin-woo%5F200405%5Fphd.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Al-Khalidi, Abdullah Koutaiba. "Advanced gallium nitride technology for microwave power amplifiers." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/6785/.

Texte intégral

Résumé :

Gallium nitride (GaN) based technology has been heavily researched over the past two decades due to its ability to deliver higher powers and higher frequencies that are demanded by the market for various applications. One of GaN’s main advantages lies in its ability to form heterojunctions to wider bandgap materials such as Aluminium Gallium Nitride (AlGaN) and Aluminium Nitride (AlN). The heterostructure results in the formation of the so called 2 dimensional electron gas (2DEG), which exhibits high electron densities of up to 6E13 cm−2 and high electron mobilities of up to 2000 cm2/V·s that

Styles APA, Harvard, Vancouver, ISO, etc.

22

Contino, Alessandro Patrizio. "Solar mirrors characterization for concentrating solar power technology." Doctoral thesis, Università di Catania, 2012. http://hdl.handle.net/10761/993.

Texte intégral

Résumé :

The increasing availability on the market of different types of solar reflectors such as: polymeric film mirrors, aluminum mirrors and thin glass mirrors, together with: the lack of available norms in this area, and a valid methodology to compare the performances of the candidate reflectors; highlights the necessity to conduct a more detailed analysis on these new technologies. The objective of the present work is to suggest a valuable method to compare the reflectance performance of mirrors, evaluating also their performances in order to assess: - the most durable to ageing and weathering eff

Styles APA, Harvard, Vancouver, ISO, etc.

23

COSIANSI, FERNANDO. "ISPET: Interface Sintering Process Enhanced Technology." Doctoral thesis, Politecnico di Torino, 2016. http://hdl.handle.net/11583/2643767.

Texte intégral

Résumé :

The research presented in this thesis was carried out in VISHAY Semiconductor Italiana S.P.A. at Borgaro Torinese - Italy. The framework of this thesis is the study of new materials for power electronics application, analysing their thermal, mechanical and electrical properties. Emerging application of high power systems requires new methods for power electronics integration and packaging. Stringent requirements in size and weight, reliability, durability, ambient and operation temperatures are pushing to go beyond the limits in industrial applications. As a consequence, our studies are focus

Styles APA, Harvard, Vancouver, ISO, etc.

24

Conlon, Jane-Louise. "Technology and power : a case study of the meanings of technology in an organisation and their relationship with structures of power." Thesis, Queensland University of Technology, 1999. https://eprints.qut.edu.au/36325/1/36325_Conlon_1999.pdf.

Texte intégral

Résumé :

This thesis used Giddens' (1984) theory of structuration and MacKenzie and Wacjman's (1985) notion of "social shaping", as the basis for exploring the ways in which social actors create meanings of technology to develop and reinforce structures of power within an organisational setting. Using the organisation in which the researcher worked as a casestudy, this thesis employed an ethnographic approach to interpreting how organisational actors created meanings of technology and then used these meanings as the basis for their actions. While this thesis focussed on issues relating to technol

Styles APA, Harvard, Vancouver, ISO, etc.

25

McGregor, Ian. "Low power rf transceivers." Thesis, University of Glasgow, 2008. http://theses.gla.ac.uk/464/.

Texte intégral

Résumé :

This thesis details the analysis and design of ultra-low power radio transceivers operating at microwave frequencies. Hybrid prototypes and Monolithic Microwave Integrated Circuits (MMICs) which achieve power consumptions of less than 1 mW and theoretical operating ranges of over 10 m are described. The motivation behind the design of circuits exhibiting ultra low power consumption and, in the case of the MMICs, small size is the emerging technology of Wireless Sensor Networks (WSN). WSNs consist of spatially distributed ‘nodes’ or ‘specks’ each with their own renewable energy source, one or m

Styles APA, Harvard, Vancouver, ISO, etc.

26

Parkhomenko, Y. "Power of brain." Thesis, Sumy State University, 2016. http://essuir.sumdu.edu.ua/handle/123456789/46890.

Texte intégral

Résumé :

Imagine turning on the music and writing a book just through a thought or disabled people who can feel, control their limbs or even communicate with others. We live in the digital age, so there is no surprise that last technology achievements allow us to make science fiction reality.

Styles APA, Harvard, Vancouver, ISO, etc.

27

Kajmats, Per. "Sound Power Measurements in ReactiveSound Fields." Thesis, KTH, MWL Marcus Wallenberg Laboratoriet, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-31697.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

28

Olvebrink, Pontus. "Low Power Sensor Platform for PDA." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-50060.

Texte intégral

Résumé :

Most current hand-held devices today are equipped with a series of different sensors and built in wireless connectivities such as gyro meters and Bluetooth. This thesis touches the subject of adding an additional sensor platform to the handheld computer iPAQ H5500 while only being powered by the device’s battery. The Wasa Board v1.4 created by Prof. Mark Smith was redesigned to consume no more power than the iPAQ could supply. Taking advantage of the device ability to use serial communication without any conversion made it possible to greatly lessen the effect needed. A simple software that co

Styles APA, Harvard, Vancouver, ISO, etc.

29

Mahmoud, Thair. "Optimal power generation in microgrids using agent-based technology." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2013. https://ro.ecu.edu.au/theses/599.

Texte intégral

Résumé :

The existing power grids that form the basis of the respective electrical power infrastructures for various states and nations around the world, are expected to undergo a period of rapid change in the near future. The key element driving this change is the emergence of the Smartgrid. The Smartgrid paradigm represents a transition towards an intelligent, digitally enhanced, two-way power delivery grid. The aim of the Smartgrid is to promote and enhance the e_cient management and operation of the power generation and delivery facilities, by incorporating advanced communications, information tech

Styles APA, Harvard, Vancouver, ISO, etc.

30

Rosso, Stefano. "Power Plant Operation Optimization Economic dispatch of combined cycle power plants." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264350.

Texte intégral

Résumé :

As electricity production from renewable sources increases, higher flexibility is required by fossil fuel generation to cope with the inherent fluctuations of solar and wind power. This results in shorter operating cycles and steeper ramps for the turbines, and more uncertainty for the operators. This thesis work applies mathematical optimization and statistical learning to improve the economic dispatch of a combined cycle power plant composed by two separate blocks of two gas turbines and one steam turbine. The goal is to minimize the input fuel to the gas turbines while respecting a series o

Styles APA, Harvard, Vancouver, ISO, etc.

31

Kidane, Berhane. "Low Power Wide Area Networks based on LoRA Technology." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017.

Trouver le texte intégral

Résumé :

The demand for connected devices, according to the Internet of Things (IoT) paradigm, is expected to grow considerably in the immediate future. Various standards are currently contending to gain an edge over the competition and provide the massive connectivity that will be required by a world in which everyday objects are expected to communicate with each other. Among these standards, Low-Power Wide Area Networks (LPWANs) are continuously gaining momentum, mainly thanks to their ability to provide long-range coverage to devices, exploiting license-free frequency bands. The focus of this thesis

Styles APA, Harvard, Vancouver, ISO, etc.

32

Baig, Yasir. "Technology qualification for IGCC power plant with CO2 Capture." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-14712.

Texte intégral

Résumé :

Summary:This thesis presents the technology qualification plan for the integrated gasification combined cycle power plant (IGCC) with carbon dioxide capture based on DNV recommendations. Objectives of the thesis work were development of a qualification plan, heat balance, material balance and performance characteristics for IGCC with CO2 capture. GT PRO software by thermoflow was used for the development of heat balance, material balance and performance characteristics of power plant.IGCC with pre-combustion capture is a process of generating power with very low CO2 emissions. The IGCC process

Styles APA, Harvard, Vancouver, ISO, etc.

33

Fernandez, Luis Jose. "A capacitive RF power sensor based on MEMS technology." Enschede : University of Twente [Host], 2005. http://doc.utwente.nl/57486.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Huang, Qin. "Devices and technology for CMOS compatible power integrated circuits." Thesis, University of Cambridge, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240973.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

Huang, S. "Advanced high power semiconductor devices based on trench technology." Thesis, University of Cambridge, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.604696.

Texte intégral

Résumé :

MOS-gated power semiconductor devices have dominated the application areas in power electronics. Research on improving performance of these devices have always been motivated by industrial need. These devices were conventionally fabricated using DMOS technology. Trench technology, however, has now been widely adopted to enhance the behaviour of MOS-gated power semiconductor devices. The trench IGBT is very attractive for high voltage applications. This thesis first discusses the performance optimisation and design of device structure and technology parameters for high voltage trench IGBTs base

Styles APA, Harvard, Vancouver, ISO, etc.

36

Harvey, Janet. "Behind the medical mask : medical technology and medical power." Thesis, University of Warwick, 1992. http://wrap.warwick.ac.uk/36139/.

Texte intégral

Résumé :

This thesis explores the role of technology as a resource in the structure of medical domination of birth and death, stressing technology's pivotal position at the intersection of control and uncertainty. Based in Intensive Care and Obstetrics (between which the health status of patients diverges sharply), it notes the convergence of technology used and examines the contest for control within the labour process. This includes using technology to facilitate a 'standardized' birth or death; a more retrospectively defensible event. In general, the 'burden of proof' is concluded to lie with those

Styles APA, Harvard, Vancouver, ISO, etc.

37

Baker, J. R. "The measurement of vibrational power transmission using laser technology." Thesis, University of Southampton, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358950.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Nguyen, Khoa Minh. "A 77GHz power amplifier in silicon germanium BiCMOS technology." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/38306.

Texte intégral

Résumé :

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.<br>Includes bibliographical references (leaves 53-54).<br>The allocation of millimeter-wave frequencies has opened new possibilities for imaging applications such as vehicular radar and concealed weapons detection. Recent advances in silicon processes offer a new means of implementing cost-effective millimeter-wave integrated circuits, a field previously dominated by III-V semiconductors. By moving towards silicon, millimeter-wave circuits can achieve new levels of integration that

Styles APA, Harvard, Vancouver, ISO, etc.

39

Ananthabhotla, Ishwarya. "System specific power reduction techniques for wearable navigation technology." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/105938.

Texte intégral

Résumé :

Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2016.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (page 73).<br>As a result of advances in computer vision, mapping, and controls, wearable technology for visually-impaired individuals has become a growing space of research within Assistive Technology. A team at the MIT Energy Eci

Styles APA, Harvard, Vancouver, ISO, etc.

40

Liu, Yuan-Ping. "Design and implementation of piezoelectric technology based power devices." Cachan, Ecole normale supérieure, 2009. http://tel.archives-ouvertes.fr/tel-00505837/fr/.

Texte intégral

Résumé :

Le travail présenté dans ce mémoire s'inscrit dans le cadre de l'utilisation de matériaux piézoélectriques pour la réalisation de composants passifs dans des applications de conversion d'énergie électrique. Le travail débute avec l'étude et le dimensionnement de deux convertisseurs d 'une puissance de 10 watt intégrant un transformateur piézoélectrique, l'un pour des applications d'alimentation stabilisée de 15 V (convertisseur DC/DC) et l'autre servant a l'alimentation de lampes fluorescentes a cathode froide utilisées pour le retro-éclairage d'écrans TFT de 32 pouces. L'idée étant que le tra

Styles APA, Harvard, Vancouver, ISO, etc.

41

BUCCI, ALBERTO. "Essays on human capital, technology, market power and growth." Doctoral thesis, Università degli Studi di Milano, 2002. http://hdl.handle.net/2434/597967.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

42

Fritzin, Jonas. "CMOS RF Power Amplifiers for Wireless Communications." Doctoral thesis, Linköpings universitet, Elektroniska komponenter, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-71852.

Texte intégral

Résumé :

The wireless market has experienced a remarkable development and growth since the introduction of the first modern mobile phone systems, with a steady increase in the number of subscribers, new application areas, and higher data rates. As mobile phones and wireless connectivity have become consumer mass markets, the prime goal of the IC manufacturers is to provide low-cost solutions. The power amplifier (PA) is a key building block in all RF transmitters. To lower the costs and allow full integration of a complete radio System-on-Chip (SoC), it is desirable to integrate the entire transceiver

Styles APA, Harvard, Vancouver, ISO, etc.

43

Kong, Dechao. "Advanced HVDC systems for renewable energy integration and power transmission : modelling and control for power system transient stability." Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4217/.

Texte intégral

Résumé :

The first part is concerned with dynamic aggregated modelling of large offshore wind farms and their integration into power systems via VSC-HVDC links. The dynamic aggregated modelling of offshore wind farms including WT-DFIGs and WT-PMSGs are proposed to achieve effective representations of wind farms in terms of computational time and simulation accuracy for transient stability analysis. Modelling and control of VSC-HVDC systems for integration of offshore wind farms are investigated. Comparisons of two control schemes of rectifier-side converter are carried out to evaluate their dynamic per

Styles APA, Harvard, Vancouver, ISO, etc.

44

Phasouliotis, Antonis. "Multicarrier CDMA systems with MIMO technology." Thesis, University of Manchester, 2010. https://www.research.manchester.ac.uk/portal/en/theses/multicarrier-cdma-systems-with-mimo-technology(87853579-fae7-45cb-b243-abe731f2c786).html.

Texte intégral

Résumé :

The rapid demand for broadband wireless access with fast multimedia services initiated a vast research on the development of new wireless systems that will provide high spectral efficiencies and data rates. A potential candidate for future generation wireless systems is multi-carrier code division multiple access (MC-CDMA). To achieve higher user capacities and increase the system data rate, various multiple-input multiple-output (MIMO) technologies such as spatial multiplexing and spatial diversity techniques have been proposed recently and combined with MC-CDMA.This research proposes a chip

Styles APA, Harvard, Vancouver, ISO, etc.

45

Williams, Orla. "On biomass milling for power generation." Thesis, University of Nottingham, 2016. http://eprints.nottingham.ac.uk/33464/.

Texte intégral

Résumé :

Biomass combustion has increasingly been used in pulverised fuel coal fired power stations as a way of addressing a wide range of emissions reduction targets. The reuse of existing equipment such as coal mills is essential to minimise the costs of conversion. However the fundamental fracture mechanics involved in biomass comminution are completely different to coal. Thus a thorough knowledge of the comminution properties of all biomass types in coal and biomass mills is necessary in order to minimise operational issues and to optimise milling and combustion. This thesis provides extensive nove

Styles APA, Harvard, Vancouver, ISO, etc.

46

Gammon, P. M. "Development of SiC heterojunction power devices." Thesis, University of Warwick, 2011. http://wrap.warwick.ac.uk/44625/.

Texte intégral

Résumé :

Silicon carbide (SiC), with its wide bandgap, high thermal conductivity and natural oxide is a substrate that has given rise to a new generation of power devices than can operate at high temperature, high power and high frequency, though the material is not without its problems. SiC "heterojunction devices" are layers of germanium (Ge) or silicon (Si) that are deposited via molecular beam epitaxy (MBE) or wafer bonded onto the SiC surface. These narrow bandgap thin films can provide a high mobility channel region overcoming SiC's crippling channel mobility, which is most often made worse by a

Styles APA, Harvard, Vancouver, ISO, etc.

47

Song, Ying. "Ultra Low Power Receiver Frontend for WBAN Applications." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-31182.

Texte intégral

Résumé :

As integrated circuit technology as well as intelligent computing technology advances, sensor networks which can monitor environments, systems, and complicated interactions in a range of applications are becoming widespread. Wireless Body Area Network(WBAN), which can provide medical, assisted living, sports and entertainment functions for human being, is now enabled and is gradually matching the needs of society. The realization of the WBAN sensor nodes requires ultra-low power wireless communication capability and small area cost. In order to optimize sensor nodes lifetime in WBAN, a duty cy

Styles APA, Harvard, Vancouver, ISO, etc.

48

Yang, Yunfeng. "Low Power UDP/IP Accelerator for IM3910 Processor." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-92241.

Texte intégral

Résumé :

Due to their attractive flexibility and high productivity, general purpose processors (GPPs) are found to be spreading over large domain of applications. The growing complexity of modern applications results in high performance demands and as a response, several solutions have came to fulfill these demands. One of these solutions is to couple the GPP with a hardware accelerator to off-load critical functionalities. In this thesis, A UDP/IP hardware accelerator is build to and coupled with an existing GPP with DMA interface, namely IM3910 form Imsys Technology AB in Stockholm, Sweden. The main

Styles APA, Harvard, Vancouver, ISO, etc.

49

Orebrand, Idah, Max Rosvall, and Melissa Eklund. "Microgeneration of PV power and its impact on power quality in the distribution grid." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-324313.

Texte intégral

Résumé :

This bachelor thesis examines the impacts of installed microgeneration of PV power in the distribution grid. The thesis examines the selected distribution grids power quality and how it is affected in terms of exceeding currents, voltages and reverse power flows and how the future trend of microgeneration of PV power will develop. A case study is made on Gotland with the support of the distribution grid owner, GEAB. Three of GEAB's distribution grids with different customer configurations and grid structures are being used to create different case scenarios. The production from the PV plants i

Styles APA, Harvard, Vancouver, ISO, etc.

50

Roe, Curtis Aaron. "Impacts of automated residential energy management technology on primary energy source utilization." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45865.

Texte intégral

Résumé :

The objective of the proposed research is to analyze automated residential energy management technology using primary energy source utilization. A residential energy management system (REMS) is an amalgamation of hardware and software that performs residential energy usage monitoring, planning, and control. Primary energy source utilization quantifies power system levels impacts on power generation cost, fuel utilization, and environmental air pollution; based on power system generating constraints and electric load. Automated residential energy management technology performance is quantifi

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!