Littérature scientifique sur le sujet « Processi CAD/CAM »

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Processi CAD/CAM ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Processi CAD/CAM"

1

HIRAI, Shunsuke, and Yoshihiro TERAMURA. "3211 Modeling approach for the design process with 3D CAD." Proceedings of Design & Systems Conference 2007.17 (2007): 319–22. http://dx.doi.org/10.1299/jsmedsd.2007.17.319.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

ISHIGURO, Eiki, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, and Yoshimi TAKEUCHI. "A11 Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Formulation of Post Processor(Digital design and digital manufacturing (CAD/CAM))." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 251–56. http://dx.doi.org/10.1299/jsmelem.2009.5.251.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

N., Vorkapic, Slavkovic N., Kokotovic B., and Dimic Z. "Implementation of a cutting forces model through virtual simulation of machining process." International Journal of Advanced Manufacturing Technology 135 (October 24, 2024): 3085–99. https://doi.org/10.1007/s00170-024-14681-7.

Texte intégral
Résumé :
This paper presents the development of a methodology for monitoring the part machining process on CNC machine tools using a virtual machine model in the MATLAB/Simulink environment. The focus is on monitoring the components of cutting forces that occur during the milling process. A vertical milling machine was used for model validation. By integrating the existing cutting force model and the virtual machine model in MATLAB/Simulink, the visualization of real-time cutting force values, which depend on the change of the current engagement map along the programmed toolpath, is enabled. The development of the presented simulation environment forms the basis for the implementation of new functions in G-code, contributing to the stability and optimization of the machining process.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Pinheiro Beck, João Carlos, Isaac Newton Lima Da Silva, Alexandre Baroni, and Gilver Mazin Dias. "Compartilhando protocolos: máquina CMM /CAD/CAM." Revista Iberoamericana de Ingeniería Mecánica 11, no. 3 (2007): 31–37. http://dx.doi.org/10.5944/ribim.11.3.43028.

Texte intégral
Résumé :
A meta desta contribuição é a descrição da metodologia utilizada para compartilhar um software comercial de CAD/CAM, orientado à indústria mecânica, com um equipamento industrial de controle de qualidade tridimensional (CMM). As etapas necessárias a esta integração são apresentadas, passo a passo, para facilitar o entendimento e a visualização progressiva de cada uma das fases de estudo e análise. Tomandose como refenrência este compartilhamento, efetuouse, como aplicação do processo, a medição de uma peça de geometria complexa, apresentandose o excelente resultado final obtido. O procedimento descrito pode ser empregado como técnica de engenharia reversa, CMM, CAD/CAM.
Styles APA, Harvard, Vancouver, ISO, etc.
5

SATO, RYUZO. "CAD-CAM for Apparel Production Process." Sen'i Gakkaishi 41, no. 1 (1985): P32—P38. http://dx.doi.org/10.2115/fiber.41.p32.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Camargo, Isabella Figueiredo, Ludmila Priscilla Manetti, Marilia Zeczkowski, et al. "SISTEMAS CAD/CAM E SUAS APLICAÇÕES NA ODONTOLOGIA: REVISÃO DA LITERATURA." Revista Uningá 55, S3 (2018): 221–28. http://dx.doi.org/10.46311/2318-0579.55.euj240.

Texte intégral
Résumé :
A tecnologia CAD/CAM é utilizada na odontologia principalmente na produção de estruturas protéticas. Restaurações indiretas são planejadas e fabricadas com o auxílio do computador diminuindo a influência do processo manual executado pelo técnico em prótese dentária (TPD). Além do uso de materiais padronizados, de qualidade industrial, os sistemas CAD/CAM podem ser uma ferramenta útil no diagnóstico e planejamento do tratamento, além de permitir a fabricação e restaurações de ótima qualidade em menor tempo. As restaurações CAD/CAM apresentam desempenho clínico compatível com as restaurações convencionais e esta tecnologia pode ser incorporada na pratica clínico com poucas mudanças. Este estudo mostrará o funcionamento e as aplicações da tecnologia CAD/CAM em odontologia através de uma revisão de literatura, além dos materiais que podem ser utilizados. Esta tecnologia apresenta uma gama enorme de possibilidades e traz inúmeros benefícios tanto para o cirurgião dentista quanto para o TPD. Porém, é preciso conhecer as ferramentas de cada sistema para se beneficiar de suas facilidades, pois, aliar a manufatura computadorizada a técnicas manuais podem garantir melhor acabamento e estética.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Dziubek, Tomasz, and Mateusz Pelc. "Application of CAD/CAE/RP in the modeling process and manufacture of a functional model of a turbocharger." Mechanik, no. 12 (December 2015): 973/062–973/069. http://dx.doi.org/10.17814/mechanik.2015.12.558.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Cuschieri, Laura Althea, Amy Casha, Juliana No-Cortes, Jacqueline Ferreira Lima, and Arthur Rodriguez Gonzalez Cortes. "Patient Satisfaction with Anterior Interim CAD-CAM Rehabilitations Designed by CAD Technician versus Trained Dentist—A Clinical Preliminary Study." Applied Sciences 13, no. 14 (2023): 8243. http://dx.doi.org/10.3390/app13148243.

Texte intégral
Résumé :
The objective of this study was to assess the impact of digital waxing expertise on patient satisfaction with anterior interim computer-aided design and computer-aided manufacturing (CAD-CAM) prosthetic rehabilitations designed either by a CAD and dental technician or by a dental clinician with basic CAD-CAM training. This in vivo preliminary study was conducted on a total of 18 patients receiving anterior CAD-CAM rehabilitations (at least from canine to canine) with fixed bridges and/or single crowns. Only patients that had conventional chairside temporary restorations were enrolled. Three within-patient groups were defined at different time points: group CONTROL refers to all 18 patients at their first appointment, when they were using their initial temporary conventional prostheses; group DENT refers to all patients immediately after trying in a set of CAD-CAM prostheses designed by a dental clinician (with basic one-week CAD-CAM training); and group CAD refers to all patients after trying in a set of CAD-CAM prostheses for the same tooth elements but designed by an experienced CAD technician (who was also an experienced dental prosthetic technician). All CAD-CAM restorations were milled in polymethyl methacrylate (PMMA) with high translucency and strength properties (Prime, Zirkonzahn). Satisfaction with comfort and esthetics was assessed for all patients for the three different time points (groups CONTROL, DENT and CAD). Statistically significant differences among groups were assessed with the Friedmann’s test. Group CAD significantly outperformed the other groups in both assessed variables (p = 0.001). The group DENT, in turn, outperformed group CONTROL for satisfaction with esthetics (p = 0.006) but not for comfort (p > 0.05). In conclusion, CAD operator background and expertise level significantly affect patient self-reported outcomes for anterior CAD-CAM rehabilitations. Single crowns and fixed bridges digitally designed by an experienced professional trained in both CAD-CAM and dental technology will likely offer high satisfaction and comfort to patients receiving anterior prosthetic rehabilitations.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Silva, Nelson R. F. A., Lukasz Witek, Paulo G. Coelho, Van P. Thompson, Elizabeth D. Rekow, and Jim Smay. "Additive CAD/CAM Process for Dental Prostheses." Journal of Prosthodontics 20, no. 2 (2011): 93–96. http://dx.doi.org/10.1111/j.1532-849x.2010.00623.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Manoharan, Thivakar, Marcin Humpa, Alexander Martha, and Peter Koehler. "Knowledge integration in CAD-CAM process chain." Computer-Aided Design and Applications 13, no. 5 (2016): 729–36. http://dx.doi.org/10.1080/16864360.2016.1150720.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Processi CAD/CAM"

1

Giordano, Maria. "Matrici geometriche del decoro architettonico. Photo-Scanning, reverse engineering e processi CAD/CAM." Doctoral thesis, Universita degli studi di Salerno, 2011. http://hdl.handle.net/10556/157.

Texte intégral
Résumé :
2009 - 2010<br>La ricerca si applica allo studio di decorazioni compositive a matrice geometrica originate dalle mutevoli combinazioni di forme elementari: la divisione regolare del piano con forme chiuse che lo ricoprono completamente, senza sovrapporsi e senza mai lasciare spazi vuoti. Operando su di esso, si inizia a quantificarlo, individuando ogni sua singola parte: la misurazione conduce alla scomposizione in forme elementari di figure complesse. Nello sviluppo di tali configurazioni, il problema della replica è sempre presente, dalla mera idea progettuale fino alle azioni di restauro, in quanto dalla ripetitività delle singole parti – fondamento del suo stesso esistere – prende origine l’intera composizione. Si è cercato, quindi, a partire da un’attenta analisi delle leggi simmetriche che dettano le logiche generative del disegno ornamentale, per una ben precisa canonizzazione di temi e motivi, di identificare gli schemi geometrici che consentano il controllo razionale della decorazione tramite l’individuazione dei procedimenti della iterazione in serie. Non si restituisce semplicemente il dettaglio così come ci appare, ma la scomposizione teorica dell’opera permette di individuare, nella successiva ricomposizione grafica, la natura e la posizione di ogni singolo elemento: uno sguardo critico che guida a una corretta e realistica riproduzione. I modelli formali tendono a divenire così modelli geometrici, simbolo di una struttura più profonda, che è possibile cogliere con l’aiuto di precisi schemi topologici. Attraverso i casi studio esaminati, ed in particolare in funzione del sistema decorativo riscontrato, è stato possibile individuare procedure metodologiche di rilievo ritenute idonee ad esplicitare il processo geometrico di base al fine di facilitare la successiva fase di replica sia in ambiente digitale che fisico e di favorire una funzionale sistematizzazione dell’ornato. In particolare si è ricorso ad un’innovativa metodologia, detta di photo scanning, che permette l’acquisizione simultanea di nuvole di punti e di texture. E così, nota la legge armonica che domina l’intera composizione, definita dal movimento rigido di un modulo predefinito su di un reticolo piano, la decorazione può facilmente riprodursi partendo dalla semplice unità quale entità che può essere, con l’utilizzo di macchine a controllo numerico, reiterata meccanicamente. La procedura è stata applicata a casi studi idonei per analizzare i principi della ripetibilità in serie e delle operazioni di laboratorio; ciò ha consentito, grazie alla ri-progettazione digitale e alla produzione con gli strumenti della tecnologia a controllo numerico, di codificare la riproducibilità tecnica, immateriale e materiale, del decoro architettonico. Le procedure e le strumentazioni descritte possono essere un potente metodo per il controllo, la verifica e il monitoraggio del decoro architettonico, permettendo di realizzare database metrici interattivi in grado di fornire in qualsiasi momento informazioni sull’oggetto rilevato. Impostare un modello di schedatura dei rivestimenti geometrici costituisce uno strumento di catalogazione funzionale sia alla tutela e alla fruizione del bene immobile, sia alla definizione di un metodo di approccio allo studio dei gruppi di simmetria. Si sarà così in grado di stabilire l’origine degli schemi decorativi, i percorsi di distribuzione, lo sviluppo di tendenze locali. [a cura dell'autore]<br>IX n.s.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Gandhi, Ashit R. "A CAD/CAM interface for computer-aided design of cams." Thesis, Virginia Tech, 1985. http://hdl.handle.net/10919/41555.

Texte intégral
Résumé :
<p>The purpose of this thesis is to provide a complete package for the design and three dimensional modeling display of cams.</p> <p> The software produced as a part of this work will operate as a module of CADAM to produce cam designs and enter the resulting cam as a CAD model and produce the graphical display of the cam.</p> <p> In addition to the introductory material, this thesis is divided into four sections. The section on the graphics packages used in this thesis includes a brief history and capabilities of each of the packages. The second section details the procedure to be adopted in order to design a cam. The next section details ANICAM, the program that has been developed to incorporate the design and display procedure. The fourth section of this thesis contains recommendations for further work in this area.</p> <p> The theoretical work in this project is a combination of original derivations and applications of the theory in the design literature.</p><br>Master of Science
Styles APA, Harvard, Vancouver, ISO, etc.
3

Gonçalves, Marco Aurélio da Fontoura. "Geração de programas CNC através da implementação de funções direcionadas às características do processo produtivo." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2013. http://hdl.handle.net/10183/79836.

Texte intégral
Résumé :
Este trabalho descreve uma metodologia para a geração de programas CNC para otimizar um sistema produtivo. Quanto às informações geométricas, o sistema caracteriza-se por utilizar os ciclos de usinagem que o comando da máquina disponibiliza, por possibilitar a aplicação de ciclos desenvolvidos com recursos de programação parametrizada e por gerar novos ciclos, através de uma linguagem genérica, proposta neste trabalho, em um editor de programação parametrizada. Quanto aos dados tecnológicos, ou seja, as condições de usinagem definidas no código de programação, o sistema permite a otimização dos parâmetros de corte através de um banco de dados com informações realimentadas com resultados obtidos da produção. A análise da viabilidade da metodologia proposta é realizada através da implementação de um protótipo de um sistema dedicado à programação de tornos CNC. O protótipo é composto de aplicativos computacionais desenvolvidos e orientados à otimização do sistema produtivo. A metodologia para geração de funções CAD/CAM foi implementada e testada mostrando resultados eficientes. O protótipo implementado como um conjunto de ferramentas aplicativas integradas é de fácil operação e utilização unindo todos os módulos projetados.<br>This study describes a methodology for the generation of CNC programs to optimize a productive system. Regarding geometrical information, the system is characterized by the use of machining cycles that the machine tool control provides because a allows the application of cycles developed with parameterized programming and by generation of new cycles, through a generic language, proposed in this study on a parameterized programming editor. As for technological data, i.e. the machining conditions set out in the programming code, the system allows the optimization of cutting parameters through a data base with information fed back with results of production. The feasibility analysis of the proposed methodology is accomplished through the implementation of a prototype of a system dedicated to programming CNC lathes. The prototype consists of computer applications developed and oriented to the optimization of the production system. The methodology for the generation of CAD/CAM functions has been implemented and tested showing effective results. The prototype implemented as an integrated set of applicative tools is of easy operation and use connecting all designed modules.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Wong, Francis Seung Yin. "Case-based reasoning for computer-aided inspection process planning /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-meem-b19887656a.pdf.

Texte intégral
Résumé :
Thesis (Ph. D.)--City University of Hong Kong, 2005.<br>"Submitted to Department of Manufacturing Engineering and Engineering Management in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 164-175).
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kalina, Adam. "Technologie výroby zadané součásti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231748.

Texte intégral
Résumé :
This document describes the design of new production technology specific part in an engineering company. The specific part is manufactured on a machining center by milling method. To create model was used SolidWorks software and to create CNC program was used SolidCAM program. There is production process created with new and old technologies. There is a comparison of both technologies in conclusion.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Carlson, Shane A. "Development of a Variational Part Model Using In-Process Dimensional Measurement Error." Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1341.pdf.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

黃啓榮 and Kai-wing Wong. "A CAD/CAM system for sheet metal blanking dies." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1991. http://hub.hku.hk/bib/B31210594.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Owen, John J. IIII. "Economic evaluation and justification of industrial automation." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/24539.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Ng, Wai-ming Micky. "Orientating, tessellating and direct slicing of 3D CAD models : improving accuracy and efficiency for rapid prototyping process /." Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19537621.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Tabani, Haroon R. "Application of NC machining of complex surfaces to streamlined extrusion dies." Ohio : Ohio University, 1989. http://www.ohiolink.edu/etd/view.cgi?ohiou1182523937.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Processi CAD/CAM"

1

Medland, A. J. CAD/CAM in practice: A manager's guide to understanding and using CAD/CAM. Wiley, 1986.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Medland, A. J. CADCAM in practice: System evaluation and use. Wiley, 1986.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Paul, Arthur, ed. CADCAM: Training and education through the '80s : proceedings of the CAD ed '84 conference. Kogan Page, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Gu, Ning. Computational design methods and technologies: Applications in CAD, CAM, and CAE education. Information Science Reference, 2012.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Gunasekera, J. S. CAD/CAM of dies. E. Horwood, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Chai, Guozhong, Congda Lu, and Donghui Wen. Digital design and manufacturing technology: Selected, peer reviewed papers from the conference on Digital Design and and Manufacturing, 26-28 April 2010, Hangzhou City, Zhejiang Province. TransTech, 2010.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

International Conference on Advances in Materials and Manufacturing Processes (2010 Shenzhen Shi, China). Advanced manufacturing technology: Selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China. Trans Tech Publications, 2011.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

C, Barr Paul, ed. CAD, principles and applications. Prentice Hall, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

1948-, Wysk Richard A., and Wang Hsu-Pin 1954-, eds. Computer-aided manufacturing. 3rd ed. Pearson Prentice Hall, 2006.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

1948-, Wysk Richard A., and Wang Hsu-Pin 1954-, eds. Computer-aided manufacturing. 2nd ed. Prentice Hall, 1998.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Processi CAD/CAM"

1

Krause, F. L., E. Rieger, and A. Ulbrich. "Feature processing as kernel for integrated CAE systems." In Advanced CAD/CAM Systems. Springer US, 1995. http://dx.doi.org/10.1007/978-0-387-34834-6_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

King, Robin G. "A Structural Model of Creative Process for Improved Interface Design." In Advances in CAD/CAM Workstations. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-2273-3_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Pferd, William. "Automatic Scanning and Data Processing for CAD and Archival Systems." In Advances in CAD/CAM Workstations. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-2273-3_18.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Finne, Håkon. "How do we Feed our Findings Back into the Design Process?" In Social Science Research on CAD/CAM. Physica-Verlag HD, 1988. http://dx.doi.org/10.1007/978-3-642-52380-9_29.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kohlhase, Michael, Johannes Lemburg, Lutz Schröder, and Ewaryst Schulz. "Formal Management of CAD/CAM Processes." In FM 2009: Formal Methods. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-05089-3_15.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Nordloh, Heiko. "Integration of CAD, CAM and Process Planning." In Modern Manufacturing. Springer London, 1994. http://dx.doi.org/10.1007/978-1-4471-2101-5_11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Rong, Y. "Dynamic Approach of Computer Automatic Process Planning." In CAD/CAM Robotics and Factories of the Future. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52320-5_72.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Uemura, Nobutaka. "An Application of Knowledge Engineering to Process Planning." In CAD/CAM Robotics and Factories of the Future. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52320-5_73.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Jiang, Bernard C., and J. T. Black. "Review of Determining/Optimizing a Robot’s Process Capability." In CAD/CAM Robotics and Factories of the Future. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52326-7_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Jiang, Bernard C., and J. T. Black. "Review of Determining/Optimizing a Robot’s Process Capability." In CAD/CAM Robotics and Factories of the Future. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-662-39962-0_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Processi CAD/CAM"

1

Clark, Brian. "CAD/CAM/CAE for product development process reengineering." In Aircraft Engineering, Technology, and Operations Congress. American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-3974.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Neto, Henrique Benedetto. "Integrating CAE/CAD/CAM To Improve Information Handling Within The Product Development Process." In SAE Brasil '94. SAE International, 1994. http://dx.doi.org/10.4271/942363.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Suresh, Krishnan. "Automating the CAD/CAE dimensional reduction process." In the eighth ACM symposium. ACM Press, 2003. http://dx.doi.org/10.1145/781606.781621.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Filho, João Horácio Conceição. "CAD/CAE Integrated Tools for Project Optimization Process." In 1995 SAE Brasil. SAE International, 1995. http://dx.doi.org/10.4271/952268.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Van der Velden, Alex. "CAD to CAE Process Automation Through iSIGHT-FD." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27555.

Texte intégral
Résumé :
iSIGHT-FD manages the computer software required to execute simulation-based design processes, including commercial CAD/CAE software, internally developed programs, and Excel spreadsheets. The software enables the rapid integration of these programs and automates their execution to accelerate the evaluation of many more design alternatives. It provides design exploration and optimization technology to help the user find better designs than those that can be found manually. Inside of this framework, a set of interoperable CAD and CAE components is used to define how changes in the geometry affect the product performance. In the past year Engineous worked with several of its partners to create a seamless and automated process. We will illustrate how to setup and drive geometric changes in CAD models using the translation technologies component in iSIGHT-FD. The user can set loads &amp; boundary conditions on the part/assembly that move with the geometric modifications. The changed geometry with loads &amp; boundary conditions can be automatically meshed and analyzed with FEM solvers and pre/postprocessors. The user is allowed to store and view parametric and non-parametric results for every run. These 3D CAE &amp; CAD results can then be easily embedded into Microsoft office.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Wang, Honglu, Vijay Patil, William Resh, Phil Insalaco, Dan Flesher, and Scott Lanski. "Smart Meshing Template Process with CAD/CAE Link." In SAE 2013 World Congress & Exhibition. SAE International, 2013. http://dx.doi.org/10.4271/2013-01-0637.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Ahlers, Rolf-Juergen, and W. Rauh. "CAD/CAM-coupled image processing systems." In The Hague '90, 12-16 April, edited by Donald W. Braggins. SPIE, 1990. http://dx.doi.org/10.1117/12.20227.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Manoharan, Thivakar, Marcin Humpa, Alexander Martha, and Peter Köhler. "Knowledge Integration in CAD-CAM Process Chain." In CAD'15. CAD Solutions LLC, 2015. http://dx.doi.org/10.14733/cadconfp.2015.389-393.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

"Knowledge Integration in CAD-CAM Process Chain." In CAD'15 London. CAD Solutions LLC, 2015. http://dx.doi.org/10.14733/cadconfp.2015.449-454.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Main, Bruce W., and Allen C. Ward. "A Potential Framework for CAD/CAE/CIM Decisions." In ASME 1992 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/cie1992-0008.

Texte intégral
Résumé :
Abstract This paper outlines some common problem categories taken from the literature in implementing company-wide computer integration. These problem categories form a framework for making CAD/CAE/CIM decisions. The framework addresses the following problem categories: detrimental impacts of computerization systems on design creativity, difficulties with CAD communications, inhibiting effects on continual improvement, problems of computerizational integration preceding organizational integration, and process-driven versus need-based computer integration efforts. The framework may assist CAD/CAE/CIM decision makers with their integration efforts.
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Processi CAD/CAM"

1

Lutter, T. M. ,. Westinghouse Hanford. Corrective action management (CAM) process guide. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/663121.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Clarke, Kester Diederik. Formed HIP Can Processing. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1210211.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Bailey, David H. Can An Evolutionary Process Create English Text? Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/964381.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Nagaya, Takayuki, Yoshimasa Kuwano, Yukio Oso, Kazunari Teramoto, Toshiyuki Okita, and Keiichi Shirase. Integrated Manufacturing System With Automated CAM Using Web Distributed Processing. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0133.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Giammatteo, Nicholas. Using MBSE to Develop a Process for Maintaining Legacy CAD Data. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1468903.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Bendorf, Craig V. Can the Current Acquisition Process Meet Operational Needs? Defense Technical Information Center, 1996. http://dx.doi.org/10.21236/ada329991.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Estache, Antonio, Renaud Foucart, and Tomás Serebrisky. When can lotteries improve public procurement processes? Inter-American Development Bank, 2022. http://dx.doi.org/10.18235/0004522.

Texte intégral
Résumé :
We study the potential benefits of adding a lottery component to cut the main risks associated with standard negotiated and rule-based auction procurement procedures. We show that adopting a two stage approach in which bureaucrats first negotiate with a small number of bidders to assess their eligibility and, next, rely on a lottery to award the contract reduces corruption risks often observed in negotiated procedures. For rule-based procedures, we show that a “third-price lottery” in which the two highest bidders are selected with equal probability and the project is contracted at a price corresponding to the third highest bid can reduce limited liability, renegotiation, bid rigging and collusion risks.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Nakamoto, Shingo, Mai Kato, Satoshi Furui, and Nick Tzannetakis. Proposal for Changing CAE Process Using By PIDO, OPTIMUS. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0343.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Mathias, Steven D. The Interagency Coordination Process: What We Can Do Now. Defense Technical Information Center, 2008. http://dx.doi.org/10.21236/ada478823.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Bonnell, C. Certification Authority Authorization (CAA) Processing for Email Addresses. RFC Editor, 2023. http://dx.doi.org/10.17487/rfc9495.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!