Se connecter

Bibliographies thématiques / Processi CAD/CAM / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Processi CAD/CAM.

Articles de revues sur le sujet « Processi CAD/CAM »

Auteur : Grafiati

Publié le 10 mars 2023

Mis à jour le 31 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Processi CAD/CAM ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

HIRAI, Shunsuke, and Yoshihiro TERAMURA. "3211 Modeling approach for the design process with 3D CAD." Proceedings of Design & Systems Conference 2007.17 (2007): 319–22. http://dx.doi.org/10.1299/jsmedsd.2007.17.319.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

ISHIGURO, Eiki, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, and Yoshimi TAKEUCHI. "A11 Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Formulation of Post Processor(Digital design and digital manufacturing (CAD/CAM))." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 251–56. http://dx.doi.org/10.1299/jsmelem.2009.5.251.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

N., Vorkapic, Slavkovic N., Kokotovic B., and Dimic Z. "Implementation of a cutting forces model through virtual simulation of machining process." International Journal of Advanced Manufacturing Technology 135 (October 24, 2024): 3085–99. https://doi.org/10.1007/s00170-024-14681-7.

Texte intégral

Résumé :

This paper presents the development of a methodology for monitoring the part machining process on CNC machine tools using a virtual machine model in the MATLAB/Simulink environment. The focus is on monitoring the components of cutting forces that occur during the milling process. A vertical milling machine was used for model validation. By integrating the existing cutting force model and the virtual machine model in MATLAB/Simulink, the visualization of real-time cutting force values, which depend on the change of the current engagement map along the programmed toolpath, is enabled. The develo

Styles APA, Harvard, Vancouver, ISO, etc.

4

Pinheiro Beck, João Carlos, Isaac Newton Lima Da Silva, Alexandre Baroni, and Gilver Mazin Dias. "Compartilhando protocolos: máquina CMM /CAD/CAM." Revista Iberoamericana de Ingeniería Mecánica 11, no. 3 (2007): 31–37. http://dx.doi.org/10.5944/ribim.11.3.43028.

Texte intégral

Résumé :

A meta desta contribuição é a descrição da metodologia utilizada para compartilhar um software comercial de CAD/CAM, orientado à indústria mecânica, com um equipamento industrial de controle de qualidade tridimensional (CMM). As etapas necessárias a esta integração são apresentadas, passo a passo, para facilitar o entendimento e a visualização progressiva de cada uma das fases de estudo e análise. Tomandose como refenrência este compartilhamento, efetuouse, como aplicação do processo, a medição de uma peça de geometria complexa, apresentandose o excelente resultado final obtido. O procedimento

Styles APA, Harvard, Vancouver, ISO, etc.

5

SATO, RYUZO. "CAD-CAM for Apparel Production Process." Sen'i Gakkaishi 41, no. 1 (1985): P32—P38. http://dx.doi.org/10.2115/fiber.41.p32.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Camargo, Isabella Figueiredo, Ludmila Priscilla Manetti, Marilia Zeczkowski, et al. "SISTEMAS CAD/CAM E SUAS APLICAÇÕES NA ODONTOLOGIA: REVISÃO DA LITERATURA." Revista Uningá 55, S3 (2018): 221–28. http://dx.doi.org/10.46311/2318-0579.55.euj240.

Texte intégral

Résumé :

A tecnologia CAD/CAM é utilizada na odontologia principalmente na produção de estruturas protéticas. Restaurações indiretas são planejadas e fabricadas com o auxílio do computador diminuindo a influência do processo manual executado pelo técnico em prótese dentária (TPD). Além do uso de materiais padronizados, de qualidade industrial, os sistemas CAD/CAM podem ser uma ferramenta útil no diagnóstico e planejamento do tratamento, além de permitir a fabricação e restaurações de ótima qualidade em menor tempo. As restaurações CAD/CAM apresentam desempenho clínico compatível com as restaurações con

Styles APA, Harvard, Vancouver, ISO, etc.

7

Dziubek, Tomasz, and Mateusz Pelc. "Application of CAD/CAE/RP in the modeling process and manufacture of a functional model of a turbocharger." Mechanik, no. 12 (December 2015): 973/062–973/069. http://dx.doi.org/10.17814/mechanik.2015.12.558.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Cuschieri, Laura Althea, Amy Casha, Juliana No-Cortes, Jacqueline Ferreira Lima, and Arthur Rodriguez Gonzalez Cortes. "Patient Satisfaction with Anterior Interim CAD-CAM Rehabilitations Designed by CAD Technician versus Trained Dentist—A Clinical Preliminary Study." Applied Sciences 13, no. 14 (2023): 8243. http://dx.doi.org/10.3390/app13148243.

Texte intégral

Résumé :

The objective of this study was to assess the impact of digital waxing expertise on patient satisfaction with anterior interim computer-aided design and computer-aided manufacturing (CAD-CAM) prosthetic rehabilitations designed either by a CAD and dental technician or by a dental clinician with basic CAD-CAM training. This in vivo preliminary study was conducted on a total of 18 patients receiving anterior CAD-CAM rehabilitations (at least from canine to canine) with fixed bridges and/or single crowns. Only patients that had conventional chairside temporary restorations were enrolled. Three wi

Styles APA, Harvard, Vancouver, ISO, etc.

9

Silva, Nelson R. F. A., Lukasz Witek, Paulo G. Coelho, Van P. Thompson, Elizabeth D. Rekow, and Jim Smay. "Additive CAD/CAM Process for Dental Prostheses." Journal of Prosthodontics 20, no. 2 (2011): 93–96. http://dx.doi.org/10.1111/j.1532-849x.2010.00623.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Manoharan, Thivakar, Marcin Humpa, Alexander Martha, and Peter Koehler. "Knowledge integration in CAD-CAM process chain." Computer-Aided Design and Applications 13, no. 5 (2016): 729–36. http://dx.doi.org/10.1080/16864360.2016.1150720.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Kacalak, Wojciech, Zbigniew Budniak, and Filip Szafraniec. "Analysis of shaping of the screw surface in the process a of grinding by the grinding wheels using CAD/CAE." Mechanik, no. 10 (October 2016): 1368–69. http://dx.doi.org/10.17814/mechanik.2016.10.365.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

12

Huh, Jung-Bo, and June-Sung Shim. "The factors caused errors in the production process of CAD/CAM prosthesis based on experience." Journal of The Korean Dental Association 52, no. 6 (2014): 332–45. http://dx.doi.org/10.22974/jkda.2014.52.6.001.

Texte intégral

Résumé :

In recent years, precision machining of the dental prosthesis by computer assisted system is becoming pervasive in clinical dentistry. Prosthesis fabricating system that is designed by computer software and made by computer devices is called as a CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) system. By the use of dental CAD/CAM system, the improvement of marginal compatibility and mechanical properties in prosthesis can be obtained more effectively, an aesthetic quality by using new materials such as zirconia can be increased. Also, the restoration process can be simple and effi

Styles APA, Harvard, Vancouver, ISO, etc.

13

Qiao, Li Hong, and Jin Zhang. "Integrated Process Planning Based on 3D Product Models." Key Engineering Materials 407-408 (February 2009): 298–302. http://dx.doi.org/10.4028/www.scientific.net/kem.407-408.298.

Texte intégral

Résumé :

One of the major barriers to the integration of CAD, CAPP and CAM is insufficiency and incompatibility of product model data among various application systems. This paper presented an effective approach to achieve integrated process planning with CAD and CAM under a product data management environment based on 3D product models. The system architecture and the processes of an integrated process planning system (3D-IPP) were constructed using feature information and specific CAD/CAPP/CAM integration technologies based on feature. A feature-based product information model is designed as the info

Styles APA, Harvard, Vancouver, ISO, etc.

14

Yang, D. Y., D. G. Ahn, C. H. Lee, C. H. Park, and T. J. Kim. "Integration of CAD/CAM/CAE/RP for the development of metal forming process." Journal of Materials Processing Technology 125-126 (September 2002): 26–34. http://dx.doi.org/10.1016/s0924-0136(02)00414-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Melo, Laércio Almeida de, Camila Moreira Lima, Lucas Lactim Ferrarez, Delano Neves Silva, and Fabíola Pessôa Pereira Leite. "Precisão da adaptação de próteses totais confeccionadas pela tecnologia CAD/CAM: Uma revisão sistemática." Research, Society and Development 9, no. 10 (2020): e6839109154. http://dx.doi.org/10.33448/rsd-v9i10.9154.

Texte intégral

Résumé :

Objetivo: Avaliar a precisão da adaptação de próteses totais confeccionadas pela tecnologia utilizando o desenho e a manufatura assistidas por computador (CAD/CAM).Metodologia: Foi realizada uma revisão sistemática de estudos laboratoriais através das bases de dados Medline-PubMed, Scopus, Scielo, Lilacs, Web of Science e Cochrane Library, usando os descritores: “Complete denture”, “Complete dentures”, “Total denture”, “Total dentures”, “Complete prosthesis”, “Complete prostheses”, “Total prosthesis”, “Total prostheses”, “Computer Aied Design”, “Computer Aied Manufacturing”, “CAD/CAM”, Adaptat

Styles APA, Harvard, Vancouver, ISO, etc.

16

Thomas, Kurian K., and Gary W. Fischer. "Integrating CAD/CAM software for process planning applications." Journal of Materials Processing Technology 61, no. 1-2 (1996): 87–92. http://dx.doi.org/10.1016/0924-0136(96)02470-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

17

OKUDA, Yoko, Keiichi SHIRASE, Kouhei FUKADA, Keiichi NAKAMOTO, and Eiji ARAI. "306 Development of Computer-aided Flexible Process Planning System." Proceedings of The Manufacturing & Machine Tool Conference 2006.6 (2006): 43–44. http://dx.doi.org/10.1299/jsmemmt.2006.6.43.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

KOUNO, Tomoyuki, Tomo KOYAMA, Tatsuhiko SAKAGUCHI, Keiichi NAKAMOTO, and Keiichi SHIRASE. "307 Research on Voxel Model Applying for Machining Process Simulation." Proceedings of The Manufacturing & Machine Tool Conference 2006.6 (2006): 45–46. http://dx.doi.org/10.1299/jsmemmt.2006.6.45.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

19

Sousa, Gustavo Rodrigues, Vandré Taumaturgo De Mesquita, and Arnaldo De França Caldas Junior. "Avanços na reabilitação oral com prótese total utilizando tecnologia digital CAD-CAM." Revista Eletrônica Acervo Saúde 25 (February 14, 2025): e18019. https://doi.org/10.25248/reas.e18019.2025.

Texte intégral

Résumé :

Objetivo: Analisar o uso de resinas acrílicas na reabilitação oral por meio de próteses removíveis totais, comparando métodos convencionais e sistemas CAD-CAM. Revisão bibliográfica: A introdução de tecnologias digitais como CAD-CAM está substituindo os métodos tradicionais, oferecendo processos mais rápidos e eficientes. As resinas acrílicas processadas por meio de técnicas CAD-CAM demonstram superioridade em precisão, resistência e biocompatibilidade, além de reduzir tempo clínico e aumentar a satisfação do paciente. Considerações finais: As resinas acrílicas produzidas por técnicas digitais

Styles APA, Harvard, Vancouver, ISO, etc.

20

Ibrahim, Musa Alhaji, Huang Kai, and Mustapha Mukhtar Usman. "Application of CAD/CAM in the Design of Machining Process and Tooling Devices for Flange Tube." Jurnal Kejuruteraan 32, no. 1 (2020): 17–23. http://dx.doi.org/10.17576/jkukm-2020-32(1)-03.

Texte intégral

Résumé :

Recently, computer-aided design and computer aided manufacturing (CAD/CAM) is largely applied in universal machinery due to the accelerated development of computer technologies. Owing to the technical application of CAD/CAM tool in the manufacturing industry, enterprises have progressively changed their traditional approaches to design and manufacture of products. The CAD module provides product designers with capabilities of designing product model by feature-based design and obtaining product data. The product model is displayed on a screen in the CAD environment before transferring it downs

Styles APA, Harvard, Vancouver, ISO, etc.

21

FUKUTA, Yuka, and Toshiyasu KINARI. "Development of CAD / CAM System for Traditional Craft "Drawing / Pattern Carving Shibori" Process." Journal of Textile Engineering 61, no. 6 (2015): 75–83. http://dx.doi.org/10.4188/jte.61.75.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Kamsyah, Domi, Ari Kurniadi, Benny Haddli Irawan, Rahman Hakim, and Saiful Arif. "Integration System of CAD/CAM In Machinary Process Using Wire-EDM." Jurnal Teknologi dan Riset Terapan (JATRA) 3, no. 1 (2021): 21–26. http://dx.doi.org/10.30871/jatra.v3i1.3050.

Texte intégral

Résumé :

Computer-Aided Design (CAD) and Computer-Aided Manufacturing (CAM) are usually used to draw sketches and model manufacturing work processes on machines that operate using computer numerical control (CNC). To communicate with each other CAD and CAM must have the same format, the drawings produced by CAD must the same format to be run on the CAM. In this study, product images will be created using Autocad software and it will run on the Fikus VisualCAM 19 software to visualize the tool pathway. The program is created to run a CNC machine and the resulting product will check the conformity of its

Styles APA, Harvard, Vancouver, ISO, etc.

23

Porto, T. S., R. C. Roperto, E. A. Campos, S. T. Porto-Neto, and S. Teich. "Behavior of CAD/CAM materials after long thermocycling process." Dental Materials 32 (2016): e33. http://dx.doi.org/10.1016/j.dental.2016.08.068.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

24

Celani, Gabriela, Ana Maria Góes Monteiro, Juarez Franco, and Victor Calixto. "Integração de tecnologias CAD/CAE/CAM no ateliê de arquitetura: Uma aplicação no projeto de edifícios altos." Gestão & Tecnologia de Projetos 12, no. 1 (2017): 29. http://dx.doi.org/10.11606/gtp.v12i1.99222.

Texte intégral

Résumé :

Este artigo descreve uma disciplina de ateliê do 9º semestre do curso de Arquitetura e Urbanismo da Universidade Estadual de Campinas – Unicamp – em que foi adotada uma estratégia de projeto paramétrico e baseado em desempenho para o desenvolvimento de edifícios altos. A disciplina envolveu o uso de programas de análise ambiental e estrutural, além da modelagem paramétrica e algorítmica como maneira de incorporar os resultados dessas análises à geração da forma, com base no desempenho. Além disso, a disciplina fez um uso intensivo de equipamentos de fabricação digital para a produção de maquet

Styles APA, Harvard, Vancouver, ISO, etc.

25

MORI, Toshihiko, and Suyang Li. "Process Design by Fusion of Process Simulation and Artificial Intelligent." Proceedings of The Manufacturing & Machine Tool Conference 2004.5 (2004): 301–2. http://dx.doi.org/10.1299/jsmemmt.2004.5.301.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

26

Pollak, Martin, Petr Baron, and Jozef Zajac. "AUTOMATIZATION PROCESS OF DESIGNING THE TECHNOLOGICAL DOCUMENTATION BY TOOLS OF COMPREHENSIVE CAD-CAM-CAE SYSTÉM." MM Science Journal 2016, no. 03 (2016): 942–46. http://dx.doi.org/10.17973/mmsj.2016_09_201630.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

27

Cho, M. W., and T. I. Seo. "Inspection Planning Strategy for the On-Machine Measurement Process Based on CAD/CAM/CAI Integration." International Journal of Advanced Manufacturing Technology 19, no. 8 (2002): 607–17. http://dx.doi.org/10.1007/s001700200066.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

28

Álvares, Alberto José, and Joao Carlos Espíndola Ferreira. "Webmachining: Uma metodologia para integracao CAD/CAPP/CAM voltada para manufatura remota de pecas rotacionais via web." Revista Iberoamericana de Ingeniería Mecánica 9, no. 1 (2005): 79–90. https://doi.org/10.5944/ribim.9.1.42645.

Texte intégral

Résumé :

Este artigo descreve uma proposta de metodologia para integra<ao CAD/CAPP/CAM voltada para manufatura remota de pe<as rotacionais utilizando a Internet. A metodologia é concebida a partir do paradigma de modelagem baseada em síntese por features de projeto, a fim de permitir a integra<ao das atividades de projeto (CAD), planejamento do processo (CAPP) e manufatura (CAM Planejamento e CAM Execu<ao). O procedimento inicia-se na modelagem de uma pe<a por features num contexto de manufatura remota utilizando a Web como meio de comunica<ao, num modelo computacional cliente-servido

Styles APA, Harvard, Vancouver, ISO, etc.

29

Freitas, Larissa Costa, Flávia Braga de Oliveira, Camila Moreira Lima, Jean Soares Miranda, and Fabíola Pessôa Pereira Leite. "Tecnologia digital versus convencional para confecção de próteses totais: uma revisão sistemática." Research, Society and Development 11, no. 2 (2022): e24911225625. http://dx.doi.org/10.33448/rsd-v11i2.25625.

Texte intégral

Résumé :

Objetivo: Avaliar se a tecnologia CAD/CAM é superior a técnica convencional para confecção de próteses totais mucosuportadas. Metodologia: Esta revisão seguiu as recomendações do PRISMA. Foi realizada, por dois revisores calibrados, uma revisão sistemática nas bases de dados Medline-PubMed, Scopus, Scielo, Lilacs, Web of Science e Cochrane Library, usando os descritores: “Complete denture”, “Complete dentures”, “Total denture”, “Total dentures”, “Complete prosthesis”, “Complete prostheses”, “Total prosthesis”, “Total prostheses”, “Computer Aided Design”, “Computer Aided Manufacturing”, “CAD/CA

Styles APA, Harvard, Vancouver, ISO, etc.

30

Silva, Douglas Felipe de Lima e., Fabio Tavares da Silva, Maria Fernanda Limeira Feitosa, Ítalo Martins da Silva, and Tereza Januária Costa Dias. "UTILIZAÇÃO DOS SISTEMAS CAD/CAM NA CONFECÇÃO DE PRÓTESES DENTÁRIAS: REVISÃO DE LITERATURA." Revista Uningá 56, S7 (2019): 29–34. http://dx.doi.org/10.46311/2318-0579.56.euj3041.

Texte intégral

Résumé :

RESUMO Os sistemas CAD/CAM surgem como uma das maiores inovações na Odontologia contemporânea. Por meio da digitalização, o planejamento virtual e a confecção de peças protéticas, ocorreu a simplificação e a otimização do tratamento reabilitador. O objetivo deste estudo é abordar a técnica de uso do CAD/CAM, suas principais características, vantagens e desvantagens quando utilizados em prótese dentária. Foi realizada uma revisão de literatura através da busca de estudos anexados nas bases de dados: Bireme e Pubmed, publicados entre os anos de 2003 e 2018. Entre as vantagens da utilização

Styles APA, Harvard, Vancouver, ISO, etc.

31

Rosentritt, Martin, Sebastian Hahnel, Sibylle Schneider-Feyrer, Thomas Strasser, and Alois Schmid. "Martens Hardness of CAD/CAM Resin-Based Composites." Applied Sciences 12, no. 15 (2022): 7698. http://dx.doi.org/10.3390/app12157698.

Texte intégral

Résumé :

(1) Background: The properties of CAD/CAM resin-based composites differ due to differences in their composition. Instrumented indentation testing can help to analyze these differences with respect to hardness, as well as energy-converting capabilities due to viscoelastic behavior. (2) Methods: Eleven materials were investigated using instrumented indentation testing. Indentation depth (hr), Martens hardness (HM), indentation hardness (HIT), indentation modulus (EIT), the elastic part of indentation work (ηIT), and indentation creep (CIT) were investigated, and statistical analysis was performe

Styles APA, Harvard, Vancouver, ISO, etc.

32

Zaki, Eman Rashed, Islam Shawky Abdel-Aziz, Mona Sallam Ismail, and Hanaa Mohamed Fereig. "Role of coronary artery calcium score in prediction of coronary artery stenosis in symptomatic patients with suspected coronary artery disease." Scientific Journal of Al-Azhar Medical Faculty, Girls 4, no. 3 (2020): 468–73. http://dx.doi.org/10.4103/sjamf.sjamf_71_20.

Texte intégral

Résumé :

Introduction The coronary artery calcium (CAC) score has been proposed as an alternative approach for stratifying cardiovascular risk. Aim To assess the role of CAC score in prediction of coronary stenosis in symptomatic patients with intermediate probability for coronary artery disease (CAD). Patients and methods A total of 80 symptomatic patients with intermediate probability for CAD underwent thorough history taking and clinical examination. Computed tomographic (CT) scan was done for all patients. A total of 48 (60%) patients with CAC score less than 400 HU (group A) underwent CT angiograp

Styles APA, Harvard, Vancouver, ISO, etc.

33

Petukhov, A. V. "Implementation of integrated design systems in the learning process." «System analysis and applied information science», no. 1 (April 26, 2021): 71–75. http://dx.doi.org/10.21122/2309-4923-2021-1-71-75.

Texte intégral

Résumé :

The modern stage of development of CAD-systems is characterized by a significant expansion of the scope of their use. An interesting direction for improving CAD systems is their integration with CAM systems. One of the main tasks solved by CAM systems is the development of control programs for CNC machines. Many software developers for automation of design and technological preparation of production have already equipped their systems with appropriate modules. These circumstances pose an urgent task for higher educational institutions to introduce the study of integrated CAD/CAM systems into t

Styles APA, Harvard, Vancouver, ISO, etc.

34

Turunç Oğuzman, Rana, and Emir Yüzbaşıoğlu. "Air-Polishing Powders’ Effect on the Color of CAD/CAM Restorative Materials." Applied Sciences 13, no. 20 (2023): 11573. http://dx.doi.org/10.3390/app132011573.

Texte intégral

Résumé :

Air-polishing powders are used to remove stains from the enamel and various restorative materials, but their effect on the discoloration of CAD/CAM blocks remains scarce. Therefore, this study investigated the effect of various air-polishing powders on the color changes in different CAD/CAM blocks to predict the esthetic outcomes. Specimens were prepared from CAD/CAM blocks (Vita Mark II, Paradigm MZ100, Lava Ultimate, Cerasmart, Vita Enamic) and divided into five groups (n = 10) according to the air-polishing powder: sodium bicarbonate; aluminum trihydroxide; calcium carbonate; glycine; and e

Styles APA, Harvard, Vancouver, ISO, etc.

35

Trifkovic, Branka, Aleksandar Todorovic, Vojkan Lazic, Miroslav Draganjac, Nemanja Mirkovic, and Bojan Jokic. "Accuracy of optical scanning methods of the Cerec®3D system in the process of making ceramic inlays." Vojnosanitetski pregled 67, no. 10 (2010): 812–18. http://dx.doi.org/10.2298/vsp1010812t.

Texte intégral

Résumé :

Background/Aim. One of the results of many years of Cerec? 3D CAD/CAM system technological development is implementation of one intraoral and two extraoral optical scanning methods which, depending on the current indications, are applied in making fixed restorations. The aim of this study was to determine the degree of precision of optical scanning methods by the use of the Cerec?3D CAD/CAM system in the process of making ceramic inlays. Methods. The study was conducted in three experimental groups of inlays prepared using the procedure of three methods of scanning Cerec ?3D system. Ceramic in

Styles APA, Harvard, Vancouver, ISO, etc.

36

Sotto Maior, Bruno Salles, Aloizio Filgueiras, Dione Gonçalves Pinto, Lucas Lactim Ferrarez, Mariele Ferraz De Oliveira, and Tamiris Alacoque de Carvalho Freitas. "Aplicabilidade clínica dos avanços da tecnologia CAD-CAM em Odontologia." HU Revista 44, no. 1 (2019): 29–34. http://dx.doi.org/10.34019/1982-8047.2018.v44.13948.

Texte intégral

Résumé :

O avanço tecnológico tem se mostrado um grande aliado em diversas áreas, assim como na odontologia. O surgimento da tecnológica CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) na década de 1950 trouxe outra realidade para a prática clínica diária. Previamente todo o processo laboratorial de trabalhos protéticos era demorado e puramente físico, atualmente a fabricação das peças protéticas demanda um menor tempo devido a utilização do meio digital, o que consequentemente diminui as consultas aos Cirurgiões-Dentistas. A adição de ferramentas digitais no planejamento e na execução dos

Styles APA, Harvard, Vancouver, ISO, etc.

37

Hadj, Riadh Ben, Imen Belhadj, Chiheb Gouta, Moez Trigui, Nizar Aifaoui, and Moncef Hammadi. "An interoperability process between CAD system and CAE applications based on CAD data." International Journal on Interactive Design and Manufacturing (IJIDeM) 12, no. 3 (2017): 1039–58. http://dx.doi.org/10.1007/s12008-017-0445-5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Shindo, Kyo, Nicolas Schmitt, Laurent Tapie, and Elsa Vennat. "A Prototype CAE Tool for Mechanical Optimization of Dental CAD/CAM Process for All-ceramic Restoration." Computer-Aided Design and Applications 19, no. 3 (2021): 426–48. http://dx.doi.org/10.14733/cadaps.2022.426-448.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

39

Bernardini, Federico, Martina Gelfusa, Mihail Celeski, et al. "Beyond the Calcium Score: What Additional Information from a CT Scan Can Assist in Cardiovascular Risk Assessment?" Applied Sciences 13, no. 1 (2022): 241. http://dx.doi.org/10.3390/app13010241.

Texte intégral

Résumé :

Coronary artery disease (CAD) still represents a leading cause of mortality worldwide. Early identification of patients at the highest risk of CAD is crucial to prevent acute adverse events and reduce morbidity and mortality. The coronary artery calcium (CAC) score is a reliable cardiovascular (CV) risk index with an independent prognostic value. Guidelines recommend using it as a risk enhancer in individuals with low or moderate CV risk. However, other computed tomography (CT) measurable parameters have recently been proposed as CV risk markers. Increasing evidence demonstrates the associatio

Styles APA, Harvard, Vancouver, ISO, etc.

40

Kumchai, Hattanas, Patrapan Juntavee, Arthur F. Sun, and Dan Nathanson. "Effects of Veneering Ceramic and Methods on Failure Load of Veneered Zirconia." Applied Sciences 11, no. 5 (2021): 2129. http://dx.doi.org/10.3390/app11052129.

Texte intégral

Résumé :

Background: A variety of veneering options to zirconia frameworks are now available. The purpose of this study is to evaluate the effect of veneer materials, veneering methods, cement materials, and aging on the failure load of bilayered veneer zirconia. Material and methods: Zirconia bars (20 × 4 × 1 mm) were veneered to 2 mm total thickness (n = 10/group). Veneering method groups included: 1. Hand-layered feldsparthic porcelain (VM = Vita VM9, Vident) and fluorapatite glass–ceramic (CR = IPS e.max Ceram, IvoclarVivadent); 2. Pressed feldspathic porcelain (PM = Vita PM9, Vident) and fluorapat

Styles APA, Harvard, Vancouver, ISO, etc.

41

Talbi, Khaoula, Jiraporn Ousingsawat, Raquel Centeio, Rainer Schreiber, and Karl Kunzelmann. "Calmodulin-Dependent Regulation of Overexpressed but Not Endogenous TMEM16A Expressed in Airway Epithelial Cells." Membranes 11, no. 9 (2021): 723. http://dx.doi.org/10.3390/membranes11090723.

Texte intégral

Résumé :

Regulation of the Ca2+-activated Cl− channel TMEM16A by Ca2+/calmodulin (CAM) is discussed controversially. In the present study, we compared regulation of TMEM16A by Ca2+/calmodulin (holo-CAM), CAM-dependent kinase (CAMKII), and CAM-dependent phosphatase calcineurin in TMEM16A-overexpressing HEK293 cells and TMEM16A expressed endogenously in airway and colonic epithelial cells. The activator of the Ca2+/CAM-regulated K+ channel KCNN4, 1-EBIO, activated TMEM16A in overexpressing cells, but not in cells with endogenous expression of TMEM16A. Evidence is provided that CAM-interaction with TMEM16

Styles APA, Harvard, Vancouver, ISO, etc.

42

Gómez-Polo, Cristina, Ana María Martín Casado, Norberto Quispe, Eva Rosel Gallardo, and Javier Montero. "Colour Changes of Acetal Resins (CAD-CAM) In Vivo." Applied Sciences 13, no. 1 (2022): 181. http://dx.doi.org/10.3390/app13010181.

Texte intégral

Résumé :

To quantify the discolouration of the temporary acetal resins in vivo, based on the weeks of follow-up and the salivary pH in the three thirds of the tooth. To find out if the final CIELAB coordinates can be predicted from the initial colour coordinates, the salivary pH, the situation (in thirds) and the weeks of follow-up. Colour coordinates (L, C, and h) were recorded by spectrophotometry in 13 participants fitted with hybrid provisional complete dentures made of acetal resin. Colour recordings were made on the day of placement and after several weeks of follow-up (6 to 31 weeks). Salivary p

Styles APA, Harvard, Vancouver, ISO, etc.

43

Patil, Amit, Prashanti Adsare, Pooja Raj, Shivakumar Puranik, Koineni Rajender, and Rajesh Menga. "Comparison of Man Hours Utilized for Mandibluar Overdenture Treatment Retained by Single Implant with Bar Fabricated by CAD-CAM Process and Conventional Casting Processs – An Vivo Study." Journal of Pharmacy and Bioallied Sciences 16, Suppl 1 (2024): S951—S953. http://dx.doi.org/10.4103/jpbs.jpbs_1123_23.

Texte intégral

Résumé :

ABSTRACT Introduction: Both the population’s average life expectancy and the number of patients without teeth are rising. A 2012 epidemiological survey in India found that 30% of the population is edentulous. The rehabilitation process with a set of removable maxillary and mandibular complete dentures is the standard treatment for patients who are edentulous. This study is the first to incorporate and compare a novel approach to a single implant-retained mandibular overdenture with a bar attachment fabricated by CAD-CAM and a casting process on a single implant in the symphysis region. Method:

Styles APA, Harvard, Vancouver, ISO, etc.

44

Shen, Yi Li. "Research on Simulation of Cutting Process Based on the Finite Element Analysis Method." Advanced Materials Research 631-632 (January 2013): 686–90. http://dx.doi.org/10.4028/www.scientific.net/amr.631-632.686.

Texte intégral

Résumé :

With the rapid penetration of information technology in various fields, CAD/CAM/CAE technology has been widely used to fundamentally change the traditional design, production, organizational models, it also has a very important significance to promote the technological transformation of existing enterprises, bring the whole structural change of the night, develop the new technologies and the promotion of economic growth. The paper uses the blades of steam turbine as an example, combined with the finite element analysis method to study the whole cutting process, the whole process was simulated

Styles APA, Harvard, Vancouver, ISO, etc.

45

Correia, João André, José Ricardo Ferreira, Miguel Amaral Nunes, António Capelo, Miguel de Araújo Nobre, and Francisco Salvado. "Prevention of Mandible Fractures in Medication-Related Osteonecrosis of the Jaws: The Role of Virtual Surgical Planning and Computer-Aided Design and Manufacturing in Two Clinical Case Reports." Applied Sciences 11, no. 17 (2021): 7894. http://dx.doi.org/10.3390/app11177894.

Texte intégral

Résumé :

Background: Marginal mandible resection is required to achieve healing in some cases of medication-related osteonecrosis of the jaws (MRONJ). Despite the sparsity of the literature, computer-aided design/computer-aided manufacturing (CAD/CAM) materials may provide superior outcomes for patients with an increased risk of mandible fracture. The aim of this study was to report a digital workflow for surgical interventions to prevent mandible fracture in MRONJ patients. Methods: We present two cases in which virtual surgical planning (VSP) and CAD/CAM surgical guides and reconstruction plates were

Styles APA, Harvard, Vancouver, ISO, etc.

46

Merkel, M., and A. Schumacher. "An Automated Optimization Process for a CAE Driven Product Development." Journal of Mechanical Design 125, no. 4 (2003): 694–700. http://dx.doi.org/10.1115/1.1631570.

Texte intégral

Résumé :

Within the product development the need for generating design variants is given in many situations, for example to optimize an existing initial design with respect to new or modified requirements. For an efficient process it is essential that these variations can be done very easily within a small timeframe. In the virtual product development the physical characteristic of a component is determined by numerical simulation. Commercial software products exist for nearly each physical phenomenon. Often these methods are covered under CAE. A fundamental issue for building and analyzing variants ea

Styles APA, Harvard, Vancouver, ISO, etc.

47

Bonatti, Amedeo Franco, Irene Chiesa, Giovanni Vozzi, and Carmelo De Maria. "Open-source CAD-CAM simulator of the extrusion-based bioprinting process." Bioprinting 24 (December 2021): e00172. http://dx.doi.org/10.1016/j.bprint.2021.e00172.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

48

Sheth, D. S., and S. Malkin. "CAD/CAM for Geometry and Process Analysis of Helical Groove Machining." CIRP Annals 39, no. 1 (1990): 129–32. http://dx.doi.org/10.1016/s0007-8506(07)61018-x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

49

Suci, Aldrina Wulan Eka, Dina Ratnasari, Ade Prijanti Dwisaptarini, and Elline Elline. "Fracture Toughness of Monolithic Zirconia and Lithium Disilicate CAD/CAM Endocrown." Journal of Indonesian Dental Association 6, no. 2 (2023): 105. http://dx.doi.org/10.32793/jida.v6i3.968.

Texte intégral

Résumé :

 Introduction: Endocrown is an indirect restoration following the endodontic treatment made of ceramic material as a substitute for post core crown. The endocrown is cemented to the inner wall of the pulp chamber and to the cavity margins to increase the macromechanical retention. Material commonly used are monolithic zirconia and lithium disilicate; both can be obtained using the CAD/CAM technique. Good endocrown restoration must be able to handle the chewing workload especially on the posterior tooth. Objective: To determine the difference in fracture toughness of monolithic zirconia a

Styles APA, Harvard, Vancouver, ISO, etc.

50

Morales, Patricia, Line Garneau, Hélène Klein, Marie-France Lavoie, Lucie Parent, and Rémy Sauvé. "Contribution of the KCa3.1 channel–calmodulin interactions to the regulation of the KCa3.1 gating process." Journal of General Physiology 142, no. 1 (2013): 37–60. http://dx.doi.org/10.1085/jgp.201210933.

Texte intégral

Résumé :

The Ca2+-activated potassium channel of intermediate conductance, KCa3.1, is now emerging as a therapeutic target for a large variety of health disorders. The Ca2+ sensitivity of KCa3.1 is conferred by the Ca2+-binding protein calmodulin (CaM), with the CaM C-lobe constitutively bound to an intracellular domain of the channel C terminus. It was proposed on the basis of the crystal structure obtained for the C-terminal region of the rat KCa2.2 channel (rSK2) with CaM that the binding of Ca2+ to the CaM N-lobe results in CaM interlocking the C-terminal regions of two adjacent KCa3.1 subunits, le

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!