Se connecter

Bibliographies thématiques / Raw materials. 0

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Raw materials. 0 »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 29 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Raw materials. 0 ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Raw materials. 0"

1

Rina Handayani and Manaek Hamonangan Sihombing. "Planning of Optimal Raw Materials Inventory Using the Marcov Chain Method." Journal of Science Technology (JoSTec) 4, no. 1 (2022): 151–61. http://dx.doi.org/10.55299/jostec.v4i1.157.

Texte intégral

Résumé :

Inventory is an important issue to control. Both finished goods and raw material inventories are the same with ingredient raw for the production process . no seldom our find problem where company no To do good control _ in management inventory that results in needs customer no fulfilled . Ray Traso Jaya is company that manufactures and sells paving block products , bataco , riol concrete and pits wind where in the production process experience disturbance in carry out the production process caused level management supply ingredient raw sand and cement that are not optimal as a result company d

Styles APA, Harvard, Vancouver, ISO, etc.

2

Lee, Kathryn, Markus Lankers, and Oliver Valet. "Identification of Particles in Raw Materials." AAPS PharmSciTech 19, no. 1 (2017): 184–91. http://dx.doi.org/10.1208/s12249-017-0823-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Nirwana, Jean Audi Cahaya, and Herlina Herlina. "Pendekatan Min-Max Dalam Strategi Perencanaan Bahan Baku Plant Bm Gresik Guna Meminimalisir Biaya Persediaan Bahan Baku." Jurnal Teknik Industri Terintegrasi 7, no. 2 (2024): 908–20. http://dx.doi.org/10.31004/jutin.v7i2.27838.

Texte intégral

Résumé :

PT Varia Usaha Beton is a reliable and reliable concrete company. Every day, PT. Varia Usaha Beton always gets orders for various paving products from various cities according to the products available at PT. Varia Usaha Concrete Plant BM Gresik. PT. Varia Usaha Beton Plant BM Gresik uses 5 main raw materials for paving production, namely fly ash, 5-10 stone, 0/5 stone, cement and Lumajang sand. Raw material planning at PT. The BM Gresik Concrete Plant Business Varia often goes out of control, resulting in shortages (stock out) or excess raw materials (overstock). Uncontrolled raw materials se

Styles APA, Harvard, Vancouver, ISO, etc.

4

Timakova, R. T. "COMPARATIVE EPR SPECTROSCOPY OF MEAT AND FISH RAW MATERIALS." Innovations and Food Safety, no. 3 (September 28, 2018): 75–82. http://dx.doi.org/10.31677/2311-0651-2018-0-3-75-82.

Texte intégral

Résumé :

The spread of radiation technologies requires the control of irradiated food raw materials.The possibility of identification of irradiated meat and fish raw materials by bone and pulp tissues, for fish raw materials also by skin with scales has been Experimentally established. The area of the EPR signal of samples of bone tissue in meat raw materials and samples of scales from the fish skin the raw materials most sensitive to amplitude variations with a high degree of correlation (up to 0.99).

Styles APA, Harvard, Vancouver, ISO, etc.

5

Sari, Putri Ardila, and Irdawati Irdawati. "Kombucha Tea Production Using Different Tea Raw Materials." Bioscience 3, no. 2 (2019): 135. http://dx.doi.org/10.24036/0201932105584-0-00.

Texte intégral

Résumé :

Tea (Camellia sinensis) is an agricultural product that is widely issued by people around the world. Some types of tea in the world are green tea, black tea, oolong tea and white tea. Kombucha tea is brewed water for tea and sugar then given bacteria and fungi and fermented for 7-10 days. The purpose of this study was to determine the quality of kombucha of several different types and determine the organoleptic value of fermented kombucha tea using different types. This research was conducted in April-July 2019 in the Microbiology Laboratory of the Department of Biology FMIPA Padang State Univ

Styles APA, Harvard, Vancouver, ISO, etc.

6

Al’baeva, I. I., and S. G. Vlasova. "Decolorization of Glass Synthesized Using Local Raw Materials." Glass and Ceramics 73, no. 9-10 (2017): 361–64. http://dx.doi.org/10.1007/s10717-017-9889-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Pintér, Attila, Antal Tungler, Lajos Nagy, et al. "Comparative laboratory steam-cracking of different raw materials." Reaction Kinetics and Catalysis Letters 88, no. 1 (2006): 175–81. http://dx.doi.org/10.1007/s11144-006-0125-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Ivan, Eliansion, and Hindriyanto Dwi Purnomo. "FORECASTING PRICES OF FERTILIZER RAW MATERIALS USING LONG SHORT TERM MEMORY." Jurnal Teknik Informatika (Jutif) 3, no. 6 (2022): 1663–73. http://dx.doi.org/10.20884/1.jutif.2022.3.6.433.

Texte intégral

Résumé :

This study uses long short term memory (LSTM) modeling to predict time series data on the price of fertilizer raw materials, namely prilled urea, granular urea, ammonium sulphate((NH4)2SO4), ammonia (NH3), diammonium phosphate((NH4)2HPO4 ), phosphoric acid (H3PO4), phosphate rock (P2O5), NPK 16-16-16, potash, sulfur, and sulfuric acid (H2SO4). Predictions are made based on data that existed in the past using the long short term memory method, which is a derivative of the recurrent neural network. Carry out the evaluation process by looking at the root mean square error (RMSE) and mean absolute

Styles APA, Harvard, Vancouver, ISO, etc.

9

Truba, Anatoliy S., and Oksana G. Karataeva. "Development of the raw material base of hop growing as a sub-branch of traditional agriculture in the Chuvash Republic." Economy of agricultural and processing enterprises, no. 4 (2023): 26–28. http://dx.doi.org/10.31442/0235-2494-2023-0-4-26-28.

Texte intégral

Résumé :

The article considers the prospects for the development of the raw material base for the commodity production of hop raw materials. The trends in the development of the hop-growing industry in the Chuvash Republic are presented and analyzed. The problems of commodity producers and processors of hop raw materials in the current conditions of agribusiness development are formulated. The obtained results prove that the innovative development of the industry involves not only the use of resource-saving technologies in the production and processing of hop raw materials, but also the production of h

Styles APA, Harvard, Vancouver, ISO, etc.

10

Jieyao, Ling. "Order and Transportation Design of Enterprise Raw Materials based on the Logit Regression Model." Journal of Scientific and Engineering Research 10, no. 5 (2023): 289–94. https://doi.org/10.5281/zenodo.10458966.

Texte intégral

Résumé :

<strong>Abstract </strong>In order to reduce enterprise production costs and increase enterprise profits, study the supply chain system formed by enterprises for the ordering and transportation of raw materials, and consider how to maximize profits in this system. First, build a minimum supplier model for 402 suppliers, maximize production capacity when multiple constraints are met, and minimize transfer losses by building a 0-1 matrix of suppliers and carriers. Finally, using the improved Logit regression model to simulate capacity improvements, Matlab’s simulation resulted in a weekly

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Raw materials. 0"

1

Castro-Fernandez, Pedro Luis. "Optimization of laboratory performance of hot mixed asphalt concrete with Costa Rican raw materials." abstract and full text PDF (free order & download UNR users only), 2006. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3209957.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Cuevas, Salcido Alvaro. "Using the Taguchi design and central composite design to increase the robustness of a process from its raw material variability." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2009. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Livres sur le sujet "Raw materials. 0"

1

Bontempi, Elza. Raw Materials Substitution Sustainability. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60831-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Bergmann, Carlos Pérez. Techniques for Analysis of Mineral Raw Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-58985-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Raw Materials Purchasing. Elsevier, 1985. http://dx.doi.org/10.1016/c2009-0-14649-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Dabija, Adriana, Georgiana Gabriela Codină, and Lăcrămioara Rusu, eds. Unconventional Raw Materials for Food Products. MDPI, 2023. http://dx.doi.org/10.3390/books978-3-0365-8555-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Postharvest and Postmortem Processing of Raw Food Materials. Elsevier, 2022. http://dx.doi.org/10.1016/c2018-0-04495-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Hashim, Ibrahim Mahmoud, ed. Microbiological Examination of Non-Sterile Pharmaceutical Products and Raw Materials. OMICS International, 2015. http://dx.doi.org/10.4172/978-1-63278-043-0-044.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Economic, Environmental, and Social Assessments of Raw Materials for a Green and Resilient Economy. MDPI, 2022. http://dx.doi.org/10.3390/books978-3-0365-2669-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Jones, Benjamin. The electric vehicle revolution: Economic and policy implications for natural resource exporters in developing countries. UNU-WIDER, 2020. http://dx.doi.org/10.35188/unu-wider/2020/915-0.

Texte intégral

Résumé :

The emergence of a mass market for electric vehicles (EVs) offers considerable development opportunities for resource exporters, given their intensive raw material requirements, including for cobalt, nickel, lithium, copper, aluminium, and manganese. To exploit the benefits of new demand, empirical evidence on the ‘resource curse’ increasingly points to the benefits of strengthening institutions for effective policy management and to mitigate the risk of poorly directed, often excessively procyclical, investment. With many developing countries staking major claims for expanding domestic electr

Styles APA, Harvard, Vancouver, ISO, etc.

9

Biomass as Renewable Raw Material to Obtain Bioproducts of High-Tech Value. Elsevier, 2018. http://dx.doi.org/10.1016/c2015-0-05810-5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Pont Evksinskiy – 2021 : materials of XII All-Russian scientific and applied conference for young scientists on the water systems problems, dedicated to the 150 th anniversary of the Sevastopol Biological Station ‒ A. O. Kovalevsky Institute of Biology of the Southern Seas of RAS, Sevastopol, 20–24 September, 2021. IBSS, 2021. http://dx.doi.org/10.21072/978-5-6044865-8-0.

Texte intégral

Résumé :

The book includes materials of young scientists from Russia and the Republic of Abkhazia, revealing various aspects of modern marine and freshwater biology. Abstracts highlight the results of scientific research in the field of population dynamics and genetic differentiation of aquatic organisms, the features of their life cycle. The book present works on the influence of abiotic and anthropogenic environmental factors on the physiological status of aquaculture species. A number of works describes the capabilities of modern research methods applied in marine and freshwater biological studies,

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Raw materials. 0"

1

Laínez, José Miguel, Mar Pérez-Fortes, Aarón D. Bojarski, and Luis Puigjaner. "Raw Materials Supply." In Syngas from Waste. Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-540-8_3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Johnson, Les, Gregory L. Matloff, and C. Bangs. "Raw Materials from Space." In Paradise Regained. Springer New York, 2009. http://dx.doi.org/10.1007/978-0-387-79986-5_10.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Rubiera, Fernando, José Juan Pis, and Covadonga Pevida. "Raw Materials, Selection, Preparation and Characterization." In Syngas from Waste. Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-540-8_2.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Fontanesi, A. P. P., J. M. Cavenaghi, and Vania Caldas de Sousa. "Brazilian Raw Materials Doped TiO₂ Based Electroceramics." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-423-5.444.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Liu, Zhi Ping, Hong Yu Zheng, Jin Li Zhang, and Zheng Guo Jin. "Effect of Raw Materials on the Thermal Conductivity and Microstructure of Aluminum Nitride." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.790.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Joo, H., J. Yun, K. Hwang, and B. S. Jun. "Synthesis of AlON Refractory Raw Materials from Aluminum Dross Using Thermite Reaction Process." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-995-4.866.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Howe, Stuart. "Raw materials." In The Craft Brewing Handbook. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-08-102079-1.00001-1.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Cauvain, Stanley P. "Raw Materials." In Baking Problems Solved. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-08-100765-5.00002-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Wagh, Arun S. "Raw Materials." In Chemically Bonded Phosphate Ceramics. Elsevier, 2016. http://dx.doi.org/10.1016/b978-0-08-100380-0.00003-8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Deolalkar, S. P. "Alternative Raw Materials." In Designing Green Cement Plants. Elsevier, 2016. http://dx.doi.org/10.1016/b978-0-12-803420-0.00016-0.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Raw materials. 0"

1

Kim, Young-Jin, Peter L. Andresen, Paul J. Martiniano, John Chera, Michael Larsen, and Gerald M. Gordon. "Passivity of Nuclear Waste Canister Candidate Materials in Mixed-Salt Environments." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02544.

Texte intégral

Résumé :

Abstract The passivity behavior of Alloy 22 and Grade 7 titanium has been studied at 95°C in a high pH salt environment characteristic of concentrated Yucca Mountain groundwater. Measurements of corrosion potential (CP) versus time, potentiostatic polarization (PP) and cyclic potentiodynamic polarization (CPP) behavior were conducted to evaluate the passivity of these alloys. The characterization of passive films was also analyzed by x-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) to obtain the chemical composition and cross-sectional view of the metal, interf

Styles APA, Harvard, Vancouver, ISO, etc.

2

Pfennig, A., and A. Kranzmann. "Oxidation of a Single Crystal Nickel-Base Superalloy at 950 °C – a Kinetic and Microstructure Study." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08463.

Texte intégral

Résumé :

Abstract The nickel-base single crystal alloy investigated is a widely used material for first and second row blades in stationary gas turbines. Nickel-base superalloys are especially designed to resist high temperature oxidation by process gases. To determine this high temperature behaviour oxidation testing was carried out using samples cut perpendicular to (001)-direction. Microstructures were characterized by X-ray diffraction XRD, Light Microscopy LM, Scanning Electron Microscopy SEM, and X-ray energy dispersive spectroscopy (EDS), after a series of heat treatments (950 °C, 0 h -1000 h).

Styles APA, Harvard, Vancouver, ISO, etc.

3

Cundari, Lia, Saputri Agus Renelda, Nur Hayyu Tagar Molek, Shifa Putri Amaliah, and Feby Azzahra. "Removal of Chromium (VI) from Aqueous Solution Using Bentonite: The Effect of Adsorbent Dose on Characteristic, Isotherm and Kinetic Study." In Sriwijaya International Conference on Engineering and Technology 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-v6q7ym.

Texte intégral

Résumé :

One kind of heavy metal that comes from industrial waste is Cr (VI), which is obtained from steel, textile, tanning, photography, dyes, explosives, matches, and fuel mobilization waste. Cr (VI) is a carcinogen and extremely hazardous to both people and animals. In Indonesia, bentonite is a raw material that is abundantly available. This study aims to investigate the effects of varying adsorbent doses on the properties, % removal, isotherms, and kinetics of adsorption of Cr (VI) from aqueous solution. Adsorbent doses ranged from 10 g/L to 30 g/L for 0–80-minute contact periods. morphological an

Styles APA, Harvard, Vancouver, ISO, etc.

4

Hua, Yong, Richard Barker, Georgios Bermperidis, Hongyuan Zhao, Anne Neville, and Lei Zhang. "Comparison of Corrosion Behavior of X65, 1Cr, 5Cr and 13Cr Steels in Water-containing Supercritical CO2 Environments with SO2/O2." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07681.

Texte intégral

Résumé :

Abstract A systematic study is presented to determine the corrosion behavior of four different steels (X65 carbon steel, 1Cr, 5Cr and 13Cr) that could be considered as pipeline/tubular materials for the transport and/or injection of supercritical CO2 for carbon capture and storage (CCS) applications. The purpose of the research was to establish the influence of material selection on the critical water content required to avoid substantial levels of internal corrosion in an impure supercritical CO2 system containing sulphur dioxide (SO2) and oxygen (O2). Experiments were performed in autoclaves

Styles APA, Harvard, Vancouver, ISO, etc.

5

Tanous, Benjamin H., Kip O. Findley, Robert L. Cryderman, et al. "Effects of Surface Induction Hardening on the Torsional Fatigue Performance of Previously Carburized Modified 4121 Steel." In IFHTSE 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.ifhtse2024p0288.

Texte intégral

Résumé :

Abstract Carburizing and induction hardening are two surface heat treatments commonly used to increase wear resistance and fatigue performance of steel parts subject to cyclical torsional loading. It was originally hypothesized that performing an induction surface hardening heat treatment on parts previously carburized could provide further increased fatigue life, however initial torsional fatigue results from previous work indicated the opposite as the as-carburized conditions exhibited better torsional fatigue strength than the carburized plus induction surface hardened conditions. The aim o

Styles APA, Harvard, Vancouver, ISO, etc.

6

Ojong, Ojong Elias, Preniyobo Diepriye Benibo, Fidelis Ibiang Abam, and Silas Shamaye Samuel. "Enhancing Carbon (iv) Oxide Adsorption from Flue Gas Mixture at Elevated Temperature Using Composite of Nanoparticles." In Africa International Conference on Clean Energy and Energy Storage. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-3cwdqg.

Texte intégral

Résumé :

Chitosan/clay materials derived from periwinkle shells and clay soil at a 50:50 ratio were prepared as adsorbents, characterized, and used for the adsorption of CO2 from flue gas at elevated temperatures (500°C - 5000°C) in a fixed bed column (1.5 m in length and 0.02 m in internal diameter). The flue gas, with a composition of Methane (0.003), Ethane (0.002), Hydrogen (0.05), CO2 (0.15), Water Vapor (0.02), and Nitrogen (0.76), at a pressure of 49 KPa, a temperature of 5000°C, and a flow rate of 75 L/min from the exhaust tank, entered the fixed bed column for the adsorption process, where the

Styles APA, Harvard, Vancouver, ISO, etc.

7

James, Joshua P., James M. Fitz-Gerald, and John R. Scully. "Localized Corrosion of a Super-Austenitic Stainless Steel (Fe-24Ni-20Cr-6.3Mo-0.22N) Brazed with Ni-Based Braze (Ni-22Cr-6.3Si-3.8P): Effect of Braze Clearance on Corrosion Resistance." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08256.

Texte intégral

Résumé :

Abstract The microstructural and local corrosion characteristics of a super-austenitic stainless steel (SASS), (Fe-24Ni-20.5Cr-6.3Mo-0.22N, UNS N08367), brazed with a commercially available Ni-based filler alloy, (Ni-22Cr-6.5Si-3.5P) are investigated. The isolated SASS base material is intrinsically resistant to pitting and crevice corrosion in 0.6 M NaCl solution at room temperature. Isolated braze alloy, tested as a bead prepared at 1150 °C for 60 minutes in a vacuum furnace, without the diffusive egress of melting point depressants (MPDs) exhibited critical potentials for localized corrosio

Styles APA, Harvard, Vancouver, ISO, etc.

8

Salmén, Lennart, Christer Fellers, and Myat Htun. "The In-Plane and Out-of-Plane Hygroexpansional Properties of Paper." In Papermaking Raw Materials, edited by V. Punton. Fundamental Research Committee (FRC), Manchester, 1985. http://dx.doi.org/10.15376/frc.1985.2.511.

Texte intégral

Résumé :

This paper describes some studies of the effects of drying restraints and sheet density on the in-plane and out-of-plane hygroexpansivity of paper. It is shown that drying restraints in the RTE range, i.e. between 20% and 0% moisture content, greatly influence hygroexpansivity, with in-plane hygroexpansivity being lower the lower the RH to which the paper has been dried under restraint. For sheets of high density, the volume expansivity is not of affected by the drying restraint, and the reduction in in-plane hygroexpansivity is compensated by an increase in out-of-plane hygroexpansivity. For

Styles APA, Harvard, Vancouver, ISO, etc.

9

Nurwahyuni, Isnaini, Manihar Situmorang, and Riyanto Sinaga. "Micropropagation of Sumatran Frankincense (Styrax Benzoin) Forest Plants Producing Bioactive Raw Materials for Medicine." In Unima International Conference on Science and Technology 2022. Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-mkuuw7.

Texte intégral

Résumé :

Preservation of tropical forest plants that have high economic potential, such as Sumatran benzoin (Styrax benzoin Dryander), is urgently carried out through the provision of quality seeds. The purpose of this study was to propagate the Sumatran Frankincense plant to produce good quality seeds to meet the needs of seeds for forest conservation purposes. The micropropagation technique was carried out using explants from selected parent plants of very good quality. Micropropagation through the use of explants from several parts of the plant aims to produce seeds with the same incense production

Styles APA, Harvard, Vancouver, ISO, etc.

10

Fidyaningsih, Riastuti, Saddam Husin, Herri Susanto, et al. "Effect of Ribbed Smoked Sheet/Ethylene Propylene Diene Monomer Ratio on Mechanical Properties of Compounds for Pneumatic Fender Applications." In 6th International Conference on Advanced Materials Science. Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-2f2vay.

Texte intégral

Résumé :

One type of technical rubber that is currently imported is a pneumatic fender, which mostly only uses synthetic rubber as raw material. Whereas natural rubber has superior mechanical properties that are better than synthetic rubber. This research will combine natural rubber (RSS) with EPDM synthetic rubber by varying the RSS/EPDM mass ratio. This study aims to determine the effect of the mass ratio of RSS/EPDM on the quality of the mechanical properties of pneumatic fender compounds. The rubber compound is made with a ratio of RSS/EPDM: 100/0, 90/10, 80/20, 70/30, and 0/100. The mechanical tes

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Raw materials. 0"

1

Disterhaupt, Jennifer, Michael James, and Marc Klasky. (U) Segmented Scintillator Pitch, Thickness, and Septa Material Effects on the Swank Factor, Quantum Efficiency, and DQE(0) for High-Energy X-Ray Radiography. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1770096.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!