Littérature scientifique sur le sujet « Standardité »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Standardité ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Standardité"
Allamuça, Esma. « Politika gjuhësore në përcaktimin e standardit të shqipes në Kongresin e Drejtshkrimit, 1972, sipas Janet Byron dhe Arshi Pipës ». Revista Albanon 2, no 3 (18 octobre 2021) : 25–33. http://dx.doi.org/10.54273/ra.v2i3.157.
Texte intégralAllmuça, Esma. « Politika gjuhësore në përcaktimin e standardit të shqipes në Kongresin e Drejtshkrimit, 1972, sipas Janet Byron dhe Arshi Pipës ». Revista Albanon 3, no 3 (21 mai 2020) : 25–33. http://dx.doi.org/10.54273/ra.v3i3.30.
Texte intégralBurnier, Isabelle, Diane Bouchard-Lamothe et Zaki Khouani. « Patient simulé et patient standardisé : peut-on en finir avec le terme SPs ? » Pédagogie Médicale 20, no 3 (août 2019) : 147–49. http://dx.doi.org/10.1051/pmed/2020015.
Texte intégralDietrich, Christoph, Michalakis Averkiou, Michael Nielsen, Richard Barr, Peter Burns, Fabrizio Calliada, Vito Cantisani et al. « How to perform Contrast-Enhanced Ultrasound (CEUS) ». Ultrasound International Open 04, no 01 (janvier 2018) : E2—E15. http://dx.doi.org/10.1055/s-0043-123931.
Texte intégralStandaert, Olivier. « L'atypie standardisée ». Revue Communication & ; professionnalisation, no 8 (21 octobre 2019) : 37–63. http://dx.doi.org/10.14428/rcompro.v0i8.1043.
Texte intégralVlašić, Dubravka. « OVERVIEW OF ACCOUNTING METHODS OF LEASING COVERAGE ». Tourism and hospitality management 11, no 1 (mai 2005) : 101–19. http://dx.doi.org/10.20867/thm.11.1.6.
Texte intégralMisieng, Jecky. « The Bidayuh Krokong Dialect : To Standardize or not Standardize ». Education and Linguistics Research 3, no 1 (10 janvier 2017) : 15. http://dx.doi.org/10.5296/elr.v3i1.10585.
Texte intégralGavrić, Stevo. « Standardi revizije ». Oditor - casopis za Menadzment, finansije i pravo, no 12 (2015) : 16–23. http://dx.doi.org/10.5937/oditor1511016g.
Texte intégralBarton, Andrew. « Let's standardise practice ». British Journal of Nursing 28, no 8 (25 avril 2019) : S3. http://dx.doi.org/10.12968/bjon.2019.28.8.s3.
Texte intégralBerndt, Christopher C. « Standardize and deliver ». Journal of Thermal Spray Technology 5, no 1 (mars 1996) : 2–3. http://dx.doi.org/10.1007/bf02647509.
Texte intégralThèses sur le sujet "Standardité"
Ceillier, Gaël. « Filtrations à temps discret ». Grenoble, 2010. http://www.theses.fr/2010GRENM087.
Texte intégralStandardness is an important invariant in the theory of filtrations indexed by negative integer times. The main purpose of this thesis is to determine whether some filtrations are standard or not. We first focus on the filtrations of split-word processes, introduced and studied by Smorodinsky and by Laurent. We prove that Laurent's sufficient condition for non standardness is also necessary. This yields a practical criterion of standardness. In turn, this criterion enables us to exhibit non standard filtrations which become standard when time is accelerated by omitting infinitely many instants of time. Secondly, we study the natural filtrations of stationary processes on finite state-spaces. Recently Bressaud et al. \ provided a sufficient condition for the natural filtration of such a process (Xk)k to be standard when the state-space has size 2. Their condition involves the conditional laws p(⋅|x) of X0 conditionally on (Xk)k≤−1=x and controls the influence of the remote past of the process on its present X0. Bressaud and al. \ measure the maximal strength of this influence. We provide sufficient conditions for standardness based on some average gaps between these conditional laws, instead of the maximal gaps
Kykkänen, J. (Janne). « Lääketieteen tekniikan standardit tuotantoprosessissa ». Bachelor's thesis, University of Oulu, 2019. http://jultika.oulu.fi/Record/nbnfioulu-201902211230.
Texte intégralGrebe, Andy. « Standardize Your IP Traffic with TMOIP ». International Foundation for Telemetering, 2009. http://hdl.handle.net/10150/606014.
Texte intégralWith the emergence of higher bandwidth Ethernet networks on ranges, many ranges are converting their data transport from ATM(Asynchronous Transfer Mode) networks to Ethernet networks. Both networks have their respective advantages and disadvantages, however one reoccurring issue is product interoperability. The RCC (Range Commanders Council) TTG (Telecommunications and Timing Group) created the Telemetry over IP (TMoIP 218-07) solution with input from various ranges and vendors to solve this issue. This specification allows ranges to use different vendors together for Telemetry over Ethernet, based on specific needs at each site. This paper targets those who are thinking about converting from ATM to Ethernet networks.
Stich, Dominique. « Francoprovençal : proposition d'une orthographe supra-dialectale standardisée ». Paris 5, 2001. http://www.theses.fr/2001PA05H036.
Texte intégralFrancoprovençal is an unrecognised and historically and culturally undocumented language variety which has been handicapped in various ways : its name is ambiguous ; it is spoken in three different countries (France, Switzerland and Italy) ; it is not recognised as one of the regional languages and, above all, it breaks down into a number of dialects. These often have different spelling systems and, the most recent, being phonetics-based, serves further to accentuate how this variety fragments into patois. Here, then, we are to propose a standard supra-dialectal spelling system which we will call ORB (reference B orthography, an improved version of ORA which I proposed in my book "Parlons francoprovençal", l'Harmattan 1998). In giving a general overview of this language variety, it dynamic phonematic diasystem, its place among the Romance languages and writing systems used to date, as well as its toponymy, grammar, vocabulary and literature, it has been useful to have systematic recourse to the graphemic standard. (. . . )
Tricot, Marie. « Validation d'un questionnaire semi-standardisé pour le diagnostic de l'épilepsie ». Montpellier 1, 1995. http://www.theses.fr/1995MON11074.
Texte intégralJutteau-Huchet, Aurore. « La schizophrénie chez l'enfant et l'adolescent : intérêts d'un instrument d'évaluation standardisé ». Bordeaux 2, 2000. http://www.theses.fr/2000BOR23013.
Texte intégralMas, Denis. « Intérêt et reproductibilité d'un protocole standardisé dans la mesure de l'intervalle QKd ». Bordeaux 2, 1997. http://www.theses.fr/1997BOR23069.
Texte intégralWallgren, Lisette. « The complex service field-Is it possible to standardize ? » Thesis, Kristianstad University College, Department of Business Administration, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hkr:diva-4517.
Texte intégralThe field of complex services contains several actors. First it is the complex service companies that supply a professional service supplier. The professional service provider acts in many cases as a consultant. Secondly, the professional service provider works together with the client to reach a more efficient marketing. That marketing is then directed towards the customer. The customer is the client’s client and the end result.
The purpose with this dissertation is to investigate if it is possible to standardize the working procedure in order to make it as efficient as possible. We choose to investigate this based on interviews with two firms: Marklyss, a domestically operating firm, and GFK, an internationally operating firm. Our limitation is due to the ability to find participating firms.
Based on the interviews, we analysed the collected information through different theories such as 7K and standardization versus adaptation model. This was done to find similarities and differences between the companies. We found that there were some similarities that could be used to create a standardized platform for the working procedure. Also we found some differences that could be investigated further if there is any possibility to find out why and if it is possible to transform it into a similarity.
Marcoux-Voiselle, Mélissa. « Développement de modèles standardisés pour l'étude des aérosols viraux ». Thesis, Université Laval, 2014. http://www.theses.ulaval.ca/2014/30346/30346.pdf.
Texte intégralThe spread of virus in the air is a poorly understood phenomenon. Transmission by direct contact with an infected person or by indirect contact via contaminated surfaces has been widely documented, but the literature on viral aerosols remains poor. Because the aerosolization of pathogenic viruses requiring significant biosecurity measures, the availability of non-pathogenic viral models would be a valuable tool in the study of viral aerosols. The aim of this project is to develop standardized models for the study of viral aerosols. Consequently, phages were tested as models for eukaryotic viruses. To evaluate their resistance to environmental stresses and to different exposure times, these phages were aerosolized in a rotating chamber where they were exposed to various environmental conditions (relative humidity [RH], temperature, UV) and time. The results suggest that the selected phages could be good models for studying the behavior of the virus in the air.
Lapierre, Jimmy. « Amélioration de codecs audio standardisés avec maintien de l'interopérabilité ». Thèse, Université de Sherbrooke, 2016. http://hdl.handle.net/11143/8816.
Texte intégralAbstract : Digital audio applications have grown exponentially during the last decades, in good part because of the establishment of international standards. However, imposing such norms necessarily introduces hurdles that can impede the improvement of technologies that have already been deployed, potentially leading to a proliferation of new standards. This thesis shows that existent coders can be better exploited by improving their quality or their bitrate, even within the rigid constraints posed by established standards. Three aspects are studied, being the enhancement of the encoder, the decoder and the bit stream. In every case, the compatibility with the other elements of the existent coder is maintained. Thus, it is shown that the audio signal can be improved at the decoder without transmitting new information, that an encoder can produce an improved signal without modifying its decoder, and that a bit stream can be optimized for a new application. In particular, this thesis shows that even a standard like G.711, which has been deployed for decades, has the potential to be significantly improved after the fact. This contribution has even served as the core for a new standard embedded coder that had to maintain that compatibility. It is also shown that the subjective and objective audio quality of the AAC (Advanced Audio Coding) decoder can be improved, without adding any extra information from the encoder, by better exploiting the knowledge of the coder model’s limitations. Finally, it is shown that the fixed rate bit stream of the AMR-WB+ (Extended Adaptive Multi-Rate Wideband) can be compressed more efficiently when considering a variable bit rate scenario, showing the need to adapt a coder to its use case.
Livres sur le sujet "Standardité"
Petrović, Aleksandar. Međunarodni standardi rada. Niš : Pravni fakultet, Centar za publikacije, 2009.
Trouver le texte intégralNikolovski, Janko V. Evropski mediumski standardi. Skopje : MI-AN, 2005.
Trouver le texte intégralNikolovski, Janko V. Evropski mediumski standardi. Skopje : MI-AN, 2005.
Trouver le texte intégralGatignon, Hubert. To standardize or not to standardize : Marketing mix effectiveness in Europe. Cambridge, Mass : Marketing Science Institute, 1995.
Trouver le texte intégralGatignon, Hubert. To standardize or not to standardize : Marketing mix effectiveness in Europe. Cambridge, Mass : Marketing Science Institute, 1995.
Trouver le texte intégralVehbiu, Ardian. Fraktalet e shqipes : Rrëgjimi i gjeometrive të standardit. [Tiranë] : Çabej, 2007.
Trouver le texte intégralVehbiu, Ardian. Fraktalet e shqipes : Rrëgjimi i gjeometrive të standardit. [Tiranë] : Çabej, 2007.
Trouver le texte intégralSoleva, Evdokija. Standardot ISO, 14001 i negovata primena. Skopje : Mazuk, 2001.
Trouver le texte intégralDragan, Jovašević, dir. Pritvor u Jugoslaviji i međunarodni standardi. Beograd : Centar za antiratnu akciju, 2001.
Trouver le texte intégralChapitres de livres sur le sujet "Standardité"
Weik, Martin H. « standardize ». Dans Computer Science and Communications Dictionary, 1650. Boston, MA : Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_18072.
Texte intégralRainfray, Muriel. « Évaluation gérontologique standardisée ». Dans Les cancers digestifs du sujet âgé, 33–48. Paris : Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0000-4_3.
Texte intégralSomme, D. « Évaluation gériatrique standardisée ». Dans Références en réanimation. Collection de la SRLF, 29–41. Paris : Springer Paris, 2012. http://dx.doi.org/10.1007/978-2-8178-0287-9_4.
Texte intégralDemaurex, F., et N. Vu. « Patients simulés/standardisés ». Dans La simulation en santé De la théorie à la pratique, 51–62. Paris : Springer Paris, 2013. http://dx.doi.org/10.1007/978-2-8178-0469-9_6.
Texte intégralBehringer, D., D. P. Berger, H. Bertz, W. D. Digel, M. Engelhardt, J. Finke, H. Henß, M. Lübbert, R. Mertelsmann et C. Waller. « Protocoles de traitement standardisés ». Dans Précis d’hématologie et d’oncologie, 843–1009. Paris : Springer Paris, 2011. http://dx.doi.org/10.1007/978-2-287-99342-8_11.
Texte intégralDemaurex, F., et N. Vu. « Séance de simulation avec patient standardisé ». Dans La simulation en santé De la théorie à la pratique, 303–12. Paris : Springer Paris, 2013. http://dx.doi.org/10.1007/978-2-8178-0469-9_31.
Texte intégralHegbrant, Jörgen, Giorgio Gentile et Giovanni F. M. Strippoli. « The Quest to Standardize Hemodialysis Care ». Dans Hemodialysis, 39–49. Basel : KARGER, 2011. http://dx.doi.org/10.1159/000327338.
Texte intégralBercaw, Ronald G., Kurt A. Knoth et Susan T. Snedaker. « Optimizing Your Legacy System—Standardize by Specialty ». Dans The Lean Electronic Health Record, 221–28. Boca Raton : Taylor & Francis, 2018. : Productivity Press, 2017. http://dx.doi.org/10.1201/b22061-12.
Texte intégralNarander, Kumar, et Saxena Swati. « A Semantic Framework to Standardize Cloud Adoption Process ». Dans Advances in Intelligent Systems and Computing, 179–86. New Delhi : Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2752-6_17.
Texte intégralSanz Vicente, Lara, et Joaquín García Palacios. « Proposals to standardize remote sensing terminology in Spanish ». Dans Terminology and Lexicography Research and Practice, 195–210. Amsterdam : John Benjamins Publishing Company, 2010. http://dx.doi.org/10.1075/tlrp.13.14vic.
Texte intégralActes de conférences sur le sujet "Standardité"
Reinholtz, William K. « Timeline Exchange - Elements to Standardize ». Dans SpaceOps 2014 Conference. Reston, Virginia : American Institute of Aeronautics and Astronautics, 2014. http://dx.doi.org/10.2514/6.2014-1895.
Texte intégralAl-Yazeedi, Zeyana, Yousuf Al-Zaabi, Mahmood Al-Oraimi, Wafa Al-Kiyumi, Ashwaq Al-Rawahi, Kifah Al-Tobi et Ali Al-Gheithy. « Standardize/Simplify Water Flood Pattern Reviews ». Dans SPE Middle East Oil and Gas Show and Conference. Society of Petroleum Engineers, 2019. http://dx.doi.org/10.2118/195077-ms.
Texte intégralAlan VanNahmen. « Proposal to Standardize Head to Combine Interface ». Dans 2005 Tampa, FL July 17-20, 2005. St. Joseph, MI : American Society of Agricultural and Biological Engineers, 2005. http://dx.doi.org/10.13031/2013.19533.
Texte intégralVrtodušić Hrgović, Ana-Marija. « STANDARDI KVALITETE I ODRŽIVOSTI U UGOSTITELJSTVU ». Dans Hotelska kuća 2022. University of Rijeka, Faculty of Tourism and Hospitality Management, 2022. http://dx.doi.org/10.20867/hk.1.10.
Texte intégralScott-Emuakpor, Onome E., Tommy George, Casey M. Holycross, Joseph A. Beck et Charles J. Cross. « Regression Study to Standardize Piezoelectric Axial Fatigue Testing ». Dans 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia : American Institute of Aeronautics and Astronautics, 2015. http://dx.doi.org/10.2514/6.2015-0891.
Texte intégralHopp, Jerry. « Modernize, then Standardize Legacy Power Conversion ATE Architectures ». Dans 2022 IEEE AUTOTESTCON. IEEE, 2022. http://dx.doi.org/10.1109/autotestcon47462.2022.9984728.
Texte intégralGasparovsky, Dionyz, et Jana Raditschová. « Home Lighting : A Challenge to Improve and Standardise ». Dans 21st International Conference LIGHT SVĚTLO 2015. Brno : Fakulta elektrotechniky a komunikacnich technologii VUT v Brne, 2015. http://dx.doi.org/10.13164/conf.light.2015.69.
Texte intégralBaets, Roel G. « Silicon Photonics Platforms : to standardize or to diversify ? » Dans Frontiers in Optics. Washington, D.C. : OSA, 2016. http://dx.doi.org/10.1364/fio.2016.ff1e.2.
Texte intégralAlthaus, K., S. Bosher, S. Weit, S. Kluge et T. Bakchoul. « A Laboratory Approach to Standardize Luminoaggregometry for Sample Shipment ». Dans 63rd Annual Meeting of the Society of Thrombosis and Haemostasis Research. Georg Thieme Verlag KG, 2019. http://dx.doi.org/10.1055/s-0039-1680252.
Texte intégralAlrashed, Tarfah. « Systems to Democratize and Standardize Access to Web APIs ». Dans UIST '21 : The 34th Annual ACM Symposium on User Interface Software and Technology. New York, NY, USA : ACM, 2021. http://dx.doi.org/10.1145/3474349.3477587.
Texte intégralRapports d'organisations sur le sujet "Standardité"
Burns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installations. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada455829.
Texte intégralBurns, Dominic, et John Hopkinson. The National Shipbuilding Research Program. Leapfrog Technology to Standardize Equipment and System Installation. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada451699.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and Systems Installations. Section 1. Literature Search and Benchmarking. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada455827.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installations. Section Number 6 - Manufacturing and Installation Techniques. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada445584.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and Systems Installations. Section No. 1 - Literature Search and Benchmarking. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada453552.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installations. Section 7. Engineering Analysis and Develop Standards. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada455832.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installation. Section 8. Product Modeling Criteria and Demonstration. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada455833.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installation, Section 9 and 10 - Review and Approval Process. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada452848.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installations. Section Number 2 - Equipment, System Installation, and Technical Criteria. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada453155.
Texte intégralBurns, Dominic, et John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installation. Section 3. Design Criteria and Attributes for Reducing Cost. Fort Belvoir, VA : Defense Technical Information Center, septembre 1999. http://dx.doi.org/10.21236/ada455830.
Texte intégral