Bibliographies thématiques / Substrate of tension

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Substrate of tension »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Substrate of tension ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Substrate of tension"

Lamoureux, P., J. Zheng, R. E. Buxbaum, and S. R. Heidemann. "A cytomechanical investigation of neurite growth on different culture surfaces." Journal of Cell Biology 118, no. 3 (1992): 655–61. http://dx.doi.org/10.1083/jcb.118.3.655.

Texte intégral

Résumé :

We have examined the relationship between tension, an intrinsic stimulator of axonal elongation, and the culture substrate, an extrinsic regulator of axonal elongation. Chick sensory neurons were cultured on three substrata: (a) plain tissue culture plastic; (b) plastic treated with collagen type IV; and (c) plastic treated with laminin. Calibrated glass needles were used to increase the tension loads on growing neurites. We found that growth cones on all substrata failed to detach when subjected to two to threefold and in some cases 5-10-fold greater tensions than their self-imposed rest tens

Styles APA, Harvard, Vancouver, ISO, etc.

Absolom, Darryl R. "The role of bacterial hydrophobicity in infection: bacterial adhesion and phagocytic ingestion." Canadian Journal of Microbiology 34, no. 3 (1988): 287–98. http://dx.doi.org/10.1139/m88-054.

Texte intégral

Résumé :

The role that bacterial surface hydrophobicity (surface tension) plays in determining the extent of adhesion of polymer substrates and phagocytic ingestion is reviewed. The early attachment phase in bacterial adhesion is shown to depend critically on the relative surface tensions of the three interacting phases; i.e., bacteria, substrate, and suspending liquid surface tension. When suspended in a liquid with a high surface tension such as Hanks balanced salt solution, the most hydrophobic bacteria adhere to all surfaces to the greatest extent. When the liquid surface tension (γLV) is larger th

Styles APA, Harvard, Vancouver, ISO, etc.

Pradhan, Debabrata, and Ramana G. Reddy. "Interfacial Properties Prediction of Liquid Iron-Si Inclusion-MgO Refractory." Materials Science Forum 654-656 (June 2010): 390–93. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.390.

Texte intégral

Résumé :

A thermodynamic model for the prediction of interfacial tension of liquid iron, inclusion and solid oxide substrate/refractory was evaluated. The combined Good’s and Young’s equations were used for high temperature liquid metal-solid oxide substrate-inclusion system to evaluate the interfacial tensions. The study predicts the liquid silicon (as model inclusion/impurity) adherence on the solid oxide substrate/refractory (MgO) in a liquid iron melt. The calculated results for interfacial tension between liquid iron-MgO values decreased from 1798 to 1026 ergs/cm2 as the temperature increases from

Styles APA, Harvard, Vancouver, ISO, etc.

Altland, James E., James S. Owen, and William C. Fonteno. "Developing Moisture Characteristic Curves and Their Descriptive Functions at Low Tensions for Soilless Substrates." Journal of the American Society for Horticultural Science 135, no. 6 (2010): 563–67. http://dx.doi.org/10.21273/jashs.135.6.563.

Texte intégral

Résumé :

Moisture characteristic curves (MCC) relate the water content in a substrate to the matric potential at a given tension or height. These curves are useful for comparing the water-holding characteristics of two or more soils or soilless substrates. Most techniques for developing MCC are not well suited for measuring low tensions (0 to 100 cm H2O) in coarse substrates used in container nursery production such as those composed of bark. The objectives of this research were to compare an inexpensive modified long column method with an established method for creating low-tension MCCs and then to de

Styles APA, Harvard, Vancouver, ISO, etc.

Urban, D., K. Topolski, and J. De Coninck. "Wall Tension and Heterogeneous Substrate." Physical Review Letters 76, no. 23 (1996): 4388–91. http://dx.doi.org/10.1103/physrevlett.76.4388.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Farias, Maryzelia Furtado de, João Carlos Cury Saad, and Roberto Lyra Villas Bôas. "QUALIDADE COMERCIAL DO CRISÂNTEMO DE VASO EM AMBIENTE PROTEGIDO, CULTIVAR PURITAN, IRRIGADO SOB DIFERENTES TENSÕES DE ÁGUA NO SUBSTRATO." IRRIGA 8, no. 2 (2003): 160–67. http://dx.doi.org/10.15809/irriga.2003v8n2p160-167.

Texte intégral

Résumé :

QUALIDADE COMERCIAL DO CRISÂNTEMO DE VASO EM AMBIENTE PROTEGIDO, CULTIVAR PURITAN, IRRIGADO SOB DIFERENTES TENSÕES DE ÁGUA NO SUBSTRATO Maryzélia Furtado de FariasJoão Carlos Cury SaadDepartamento de Engenharia Rural, Faculdade de Ciências Agronômicas, Universidade Estadual Paulista, Botucatu, SP.CP, 237, CEP 18603-970. E-mail: maryzelia@fca.unesp.brRoberto Lyra Villas BôasDepartamento de Recursos Naturais, Faculdade de Ciências Agronômicas, Universidade Estadual Paulista, Botucatu, SP.CP, 237, CEP 18603-970 1 RESUMO Este trabalho teve como objetivo identificar a tensão de água no substrato qu

Styles APA, Harvard, Vancouver, ISO, etc.

Oleskog, Gunilla, Harald Grip, Urban Bergsten, and Kenneth Sahlén. "Seedling emergence of Pinus sylvestris in characterized seedbed substrates under different moisture conditions." Canadian Journal of Forest Research 30, no. 11 (2000): 1766–77. http://dx.doi.org/10.1139/x00-111.

Texte intégral

Résumé :

Establishment of Scots pine (Pinus sylvestris L.) stands from seed is often unsuccessful because of unsuitable environmental conditions, such as limited soil moisture or air humidity. Improved seedling emergence could be achieved by soil preparation if site-specific optimal seedbeds were specified. Therefore the effects of seedbed substrates (13 characterized mixtures of sand, silt, and organic matter) on seedling emergence were determined after 14-day emergence tests in small laboratory chambers with four moisture conditions (2 levels of relative air humidity (RH), 95 and 65%, in combination

Styles APA, Harvard, Vancouver, ISO, etc.

ZAMLJEN, Tilen, Ana SLATNAR, and Vesna ZUPANC. "Analiza fizikalnih lastnosti šotnega substrata." Acta agriculturae Slovenica 116, no. 2 (2020): 357. http://dx.doi.org/10.14720/aas.2020.116.2.1851.

Texte intégral

Résumé :

<p>Peat substrate is the main substrate for plant production, mainly for the cultivation of vegetable seedlings and ornamental plants. Peat has good water retention properties, low mass, low pH and is free from diseases and pests. The water retention properties are particularly important for optimizing irrigation and thus water consumption in plant production. We investigated the water retention properties of unused and used peat substrate and various mixtures with additives, as well as the occurrence of water repellency, as this influences water absorption into the substrate. Unused pea

Styles APA, Harvard, Vancouver, ISO, etc.

Hui, Chung-Yuen, and Anand Jagota. "Deformation near a liquid contact line on an elastic substrate." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 470, no. 2167 (2014): 20140085. http://dx.doi.org/10.1098/rspa.2014.0085.

Texte intégral

Résumé :

The equilibrium configuration of a liquid drop on a solid is determined by local energy balance. For a very stiff substrate, energy balance is represented by Young's equation. The equilibrium configuration near a line separating three fluids, in contrast, is determined by a balance of forces—their surface tensions—which is represented graphically by Neumann's triangle. We argue that these two are limiting cases of the more general situation of a drop on an elastic substrate in which both configurational energy balance and force balance must be satisfied independently. By analysing deformation

Styles APA, Harvard, Vancouver, ISO, etc.

Ju, Guoli, Shanhui Liu, Lei Feng, Chaoyue Wang, and Kailin Yang. "Modeling of Accumulator in Roll-to-Roll Coating Equipment and Tension Control with Nonlinear PID." Polymers 16, no. 24 (2024): 3479. https://doi.org/10.3390/polym16243479.

Texte intégral

Résumé :

This paper addresses the issue of the high-precision control of substrate tension in an accumulator during the roll-to-roll coating process. First, a coupling model for tension errors in the substrate within the accumulator is established, along with dynamic models for the input–output rollers, carriage, and the thrust model of the ball screw. Based on these models, a simulation model is built in MATLAB/Simulink to analyze the main causes of substrate tension errors in the accumulator under uncontrolled conditions. Next, to tackle the tension errors caused by carriage displacement, a nonlinear

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Substrate of tension"

Wang, Guan. "Roles of substrate rigidity and composition in membrane trafficking." Thesis, Sorbonne Paris Cité, 2016. http://www.theses.fr/2016USPCC195.

Texte intégral

Résumé :

Du cerveau à l’os, la rigidité et la composition de la matrice extracellulaire varient énormément et jouent un rôle dans les réponses cellulaires. La rigidité influe également sur la tension de la membrane plasmique, elle-même régulée par le trafic membranaire. Comment la rigidité et la composition du substrat peuvent réguler l'exocytose, qui à son tour régule la tension de la membrane, reste largement inconnu. Ici, j'ai utilisé l’imagerie pHluorin d’évènements uniques d’exocytose de cellules cultivées sur des substrats de rigidité et de composition contrôlée pour explorer la régulation de VAM

Styles APA, Harvard, Vancouver, ISO, etc.

Burchnall, Mark. "An Experimental Study of the Rate Dependencies of a Nonwoven Paper Substrate in Tension using Constitutive Relations." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1327068014.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Fields, Jeb Stuart. "Soilless Substrate Hydrology and Subsequent Impacts on Plant-Water Relations of Containerized Crops." Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/74925.

Texte intégral

Résumé :

Freshwater is a finite resource that is rapidly becoming more scrutinized in agricultural consumption. Specialty crop producers, especially ornamental crop producers, must continually improve production sustainability, with regards to water resource management, in order to continue to stay economically viable. Soilless substrates were initially developed to have increased porosity and relatively low water holding capacity to ensure container crops would not remain overhydrated after irrigations or rain events. As a result, substrates were selected that are now considered to be in efficient in

Styles APA, Harvard, Vancouver, ISO, etc.

Linn, John Ross. "Characterizing Interfacial Bonds in Hybrid Metal AM Structures." BYU ScholarsArchive, 2018. https://scholarsarchive.byu.edu/etd/7030.

Texte intégral

Résumé :

The capabilities of various metal Additive Manufacturing (AM) processes, such as Powder Bed Fusion – Laser (PBF-L) and Direct Energy Deposition (DED) are increasing such that it is becoming ever more common to use them in industrial applications. The ability to print atop a substrate broadens that scope of applications. There is ongoing research regarding the mechanical properties of additively processed materials, but little regarding the interaction between additive material and its substrate. An understanding of the mechanical and performance properties of the AM/substrate interface is impe

Styles APA, Harvard, Vancouver, ISO, etc.

Hourdequin, Hélène. "Contribution à la conception et mise en oeuvre de structures de packaging pour la montée en tension des modules de puissance : contraintes sur les isolants." Thesis, Toulouse 3, 2018. http://www.theses.fr/2018TOU30357.

Texte intégral

Résumé :

L'électronique de puissance est à l'orée d'une importante évolution avec l'introduction dans les systèmes de nouveaux composants de puissance à semi-conducteur 'grand gap'. En effet, l'évolution de la filière technologique à base de carbure de silicium (SiC) permet le développement de puces de tailles plus petites, capables de fonctionner à plus haute fréquence de commutation, et de supporter des tensions supérieures aux tensions actuelles, restreintes depuis plusieurs dizaines d'années par les propriétés physiques du silicium. L'introduction de ces composants impose par conséquent d'adapter l

Styles APA, Harvard, Vancouver, ISO, etc.

Gorge, Vanessa. "Caractérisations de matériaux et tests de composants des cellules solaires à base des nitrures des éléments III-V." Phd thesis, Université Paris Sud - Paris XI, 2012. http://tel.archives-ouvertes.fr/tel-00707717.

Texte intégral

Résumé :

Parmi les nitrures III-V, le matériau InGaN a été intensément étudié depuis les années 2000 pour des applications photovoltaïques, en particulier pour des cellules multi-jonctions, grâce à son large gap modulable pouvant couvrir quasiment tout le spectre solaire. On pourrait alors atteindre de hauts rendements tout en assurant de bas coûts. Cependant, l'un des problèmes de l'InGaN est l'absence de substrat accordé en maille provoquant une grande densité de défauts et limitant ainsi les performances des composants. Nous avons donc étudié la faisabilité de cellules solaires simples jonctions à b

Styles APA, Harvard, Vancouver, ISO, etc.

Stolz, Carina Mariane. "Análise dos principais parâmetros que influenciam na área de contato substrato/argamassa de revestimento." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2015. http://hdl.handle.net/10183/118837.

Texte intégral

Résumé :

A importância do aprofundamento dos estudos sobre argamassas de revestimento justifica-se por este ser um material muito utilizado internamente e externamente em edificações brasileiras, no entanto, ainda apresentar grande quantidade de manifestações patológicas. Estudos sobre os mecanismos envolvidos no desenvolvimento da aderência das mesmas vêm sendo realizados por pesquisadores nacional e internacionalmente, com o intuito de compreender as interações que ocorrem entre a argamassa e os substratos. Neste contexto, o principal objetivo desta pesquisa consiste em determinar a influência dos pa

Styles APA, Harvard, Vancouver, ISO, etc.

Diaz, Bárbara da Cunha. "Uso da centrifuga para determinação da retenção de água para substratos à base de casca de arroz." Universidade Federal de Pelotas, 2010. http://repositorio.ufpel.edu.br/handle/ri/2424.

Texte intégral

Résumé :

Made available in DSpace on 2014-08-20T14:33:14Z (GMT). No. of bitstreams: 1 Tese_Barbara_Cunha_Diaz.pdf: 9107131 bytes, checksum: c5f5e680e9b3857970621c3877339f43 (MD5) Previous issue date: 2010-12-20<br>The performance of a substrate is closely related to their physical and chemical properties, and the prior knowledge and study of these characteristics, permit evaluation of its quality and adjust to different use conditions. The agricultural problem in the production of plants in containers is to ensure optimal conditions for biomass production with a development of roots restricted

Styles APA, Harvard, Vancouver, ISO, etc.

Le, Bot Cédric. "Impact et solidification de gouttes metalliques sur un substrat solide." Bordeaux 1, 2003. http://www.theses.fr/2003BOR12772.

Texte intégral

Résumé :

Ce travail a pour objet l'étude des phénomènes mécaniques et thermiques lors de l'impact de gouttes de métal chaudes sur un substrat solide sec froid par simulation numérique et par analyse expérimentale. Cette étude vise à mieux comprendre la formation de revêtements fins sur une surface par pulvérisation de gouttelettes et à caractériser les paramètres qui influencent la porosité du film fin et sa topologie de surface. Les simulations numériques sont basées sur un modèle à un fluide et le domaine contient à la fois l'air, les gouttes et le substrat. Ce modèle consiste à coupler les équations

Styles APA, Harvard, Vancouver, ISO, etc.

Delabre, Ulysse. "Films nématiques minces sur substrats liquides." Phd thesis, Université Pierre et Marie Curie - Paris VI, 2009. http://tel.archives-ouvertes.fr/tel-00472333.

Texte intégral

Résumé :

Ce travail de thèse analyse l'organisation des films de cristaux liquides nématiques sur substrats liquides (eau et glycérol). Dans ce cas, l'ancrage planaire au niveau du substrat liquide est plus fort que l'ancrage homéotrope à l'interface libre. En dessous d'une épaisseur critique de l'ordre de 0.5-0.6 µm, des stries qui correspondent à une modulation de l'orientation du directeur, apparaissent. La longueur d'onde de ces stries est largement supérieure à l'épaisseur du film. Nous avons analysé la situation spécifique des films très minces et montré qu'une phase striée existait pour des film

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Substrate of tension"

Pallanti, Stefano, Jennifer Barnes, Christopher Pittenger, and Jane Eisen. Incompleteness and Harm Avoidance in OCD. Edited by Christopher Pittenger. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780190228163.003.0009.

Texte intégral

Résumé :

Obsessive-compulsive disorder (OCD) has been traditionally linked with the motivational dimension of harm avoidance (HA). However, there is increasing evidence for the involvement of a second core dimension, referred to as Incompleteness (INC) or “not just right experiences” (NJREs), in a substantial fraction of patients. INC-driven compulsions are typically driven by feelings of discomfort or tension, rather than by anxiety. Appreciation of the importance of INC in OCD is one of the factors that motivated the movement of OCD out of the Anxiety Disorders chapter and into its own grouping in th

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Substrate of tension"

Qian, J., J. Wang, and H. Gao. "Tension-Induced Growth of Focal Adhesions at Cell–Substrate Interface." In IUTAM Symposium on Cellular, Molecular and Tissue Mechanics. Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3348-2_16.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Balokhonov, Ruslan R., and Varvara A. Romanova. "Microstructure-Based Computational Analysis of Deformation and Fracture in Composite and Coated Materials Across Multiple Spatial Scales." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_17.

Texte intégral

Résumé :

AbstractA multiscale analysis is performed to investigate deformation and fracture in the aluminum-alumina composite and steel with a boride coating as an example. Model microstructure of the composite materials with irregular geometry of the matrix-particle and substrate-coating interfaces correspondent to the experimentally observed microstructure is taken into account explicitly as initial conditions of the boundary value problem that allows introducing multiple spatial scales. The problem in a plane strain formulation is solved numerically by the finite-difference method. Physically-based

Styles APA, Harvard, Vancouver, ISO, etc.

Popov, Valentin L. "Adhesion of a Thin Soft Matter Layer: The Role of Surface Tension." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_19.

Texte intégral

Résumé :

AbstractWe consider an adhesive contact between a thin soft layer on a rigid substrate and a rigid cylindrical indenter (“line contact”) taking the surface tension of the layer into account. First, it is shown that the boundary condition for the surface outside the contact area is given by the constant contact angle—as in the case of fluids in contact with solid surfaces. In the approximation of thin layer and under usual assumptions of small indentation and small inclination angles of the surface, the problem is solved analytically. In the case of a non-adhesive contact, surface tension makes

Styles APA, Harvard, Vancouver, ISO, etc.

Loo, Yuen Hern, Rd Khairilhijra’ Khirotdin, and Nurhafizzah Hassan. "Review of Modelling of Deposition of Conductive Ink on Multiple Substrates with Different Substrate Surface Energy and Ink Surface Tension." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3814-7_8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Belmokretar, Karim, Kada Ayed, Nordine Leklou, Djamel El Ddine Kerdal, Mohammed Mouli, and Meftah Allal. "Designing Eco-Friendly Materials Intended for Repairing Reinforced Concrete Structures." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_64.

Texte intégral

Résumé :

AbstractGiven the considerable number of concrete structures either damaged or nearing the end of their lifespan, it becomes crucial to undertake substantial repairs. This is essential not only to address existing deterioration but also to ensure the preservation and prolonged durability of these structures. This study aims to explore the usability of innovative concretes in the repair of damaged reinforced concrete structures. However, these repairs must be executed in an environment-friendly manner. Therefore, the envisioned characteristics aimed to develop highly fluid concretes comprised o

Styles APA, Harvard, Vancouver, ISO, etc.

Keller, R. R., N. Barbosa, R. H. Geiss, and D. T. Read. "An Electrical Method for Measuring Fatigue and Tensile Properties of Thin Films on Substrates." In The Mechanical Behavior of Materials X. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-440-5.1115.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Horiuchi, Shin. "Electron Microscopy for Visualization of Interfaces in Adhesion and Adhesive Bonding." In Interfacial Phenomena in Adhesion and Adhesive Bonding. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-4456-9_2.

Texte intégral

Résumé :

AbstractThis chapter provides an overview of electron microscopy techniques to investigate interfaces in polymeric materials and adhesive bonds. First, how the instruments of energy-filtering transmission electron microscopy (EFTEM), scanning transmission electron microscopy (STEM), and scanning electron microscopy (SEM) work and are operated is briefly described. The principles of electron energy-loss spectroscopy (EELS) and energy-dispersive X-ray spectrometry (EDX), which are spectroscopic techniques associated with these instruments, are described. Next, the specimen preparation techniques

Styles APA, Harvard, Vancouver, ISO, etc.

"FIG. 8 Liquid droplet on a solid substrate in a gravitational field." In Surface and Interfacial Tension. CRC Press, 2004. http://dx.doi.org/10.1201/9780203021262-59.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

"FIG. 10 Shape of the liquid droplet from the numerical tables of Bashforth and Adams [29] for β=1. The location of the substrate (the broken horizontal line) is such that the liquid-vapor surface meets the substrate with angle θ." In Surface and Interfacial Tension. CRC Press, 2004. http://dx.doi.org/10.1201/9780203021262-61.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

"FIG. 12 Half of the liquid droplet on the substrate in terms of r(z); the other half (not shown) is its mirror image reflected in the z-axis. The height h is the distance between the substrate and the apex of the droplet." In Surface and Interfacial Tension. CRC Press, 2004. http://dx.doi.org/10.1201/9780203021262-63.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Substrate of tension"

Shank, Roxanne A., Thomas R. McCartney, and Russell Philion. "Ultrasonic Chemical Cleaning: Development of Chemical Blends for Industrial Applications." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16747.

Texte intégral

Résumé :

ABSTRACT Ultrasonic cleaning is a technique which originated back in the 1950s and has seen widespread use in medical and scientific laboratories, but the application of ultrasonic cleaning to industrial process equipment remains a relatively new technique which is still gaining headway in the North American markets. The challenges of upscaling the process of ultrasonic cleaning continues to push the development in this field to new innovative applications and advancement in the understanding of surface responsive techniques. The development of chemical blends for ultrasonic chemical cleaning

Styles APA, Harvard, Vancouver, ISO, etc.

Corrigan, Douglas, Chris Lucy, and Edye Fox Abrams. "Using a Climate Controlled Application Chamber to Understand Coating Dynamics." In SSPC 2018. SSPC, 2018. https://doi.org/10.5006/s2018-00016.

Texte intégral

Résumé :

Abstract Application and curing dynamics of paints are rarely quantified over a wide range of varying climactic conditions; yet, this information is critical to the final performance of the coating. There is a growing need among raw material suppliers, formulators, and applicators to better understand the performance of products under the extreme humidity and temperature conditions experienced during application. Both humidity and temperature play a large role in fluid dynamics related to the spray stream, the formation of the film on the substrate surface, the curing dynamics, and the final p

Styles APA, Harvard, Vancouver, ISO, etc.

Yun, Jun Tae, Taek Kyu Kwon, Tae Sung Kang, Kyung Lae Kim, Tae kyu Kim, and Jong Man Han. "A Critical Study on Edge Retention of Protective Coatings for a Ship Hull." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05016.

Texte intégral

Résumé :

Abstract The problems of early coating failure, mechanical damages, and the subsequent corrosion at and around edge areas, are a major concern of the ship’s ballast tank. These problems result directly from: exposure to very corrosive conditions, the deficient edge retention caused by surface tension, surface tension gradient, gravity-driven gradients, and coating’s shrinkage during application and the curing. During recent years, there has been an industrial trend towards the development of edge retention ability such as, using high solid or solvent-free coating materials and applying stripe

Styles APA, Harvard, Vancouver, ISO, etc.

Sugimoto, Megumi, Eijiro Maeda, and Toshiro Ohashi. "Modulation of Traction Forces of Isolated Tenocytes by Substrate Stiffness." In ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-53818.

Texte intégral

Résumé :

Mechanical stimuli are important to maintenance of homeostasis in many connective tissues including tendons and ligaments. Application of cyclic tensile loading in a physiological range has been demonstrated to possess anabolic and anti-catabolic effects on tenocyte metabolism [1,2], whereas the loading falling outside the range induced upregulations of tenocyte catabolism [3]. One of mechanotransduction signaling pathways of tenocytes is mediated via cytoskeletal elements [4]. It has been demonstrated that cytoskeletal tension within tenocytes regulated anabolic and catabolic gene expressions

Styles APA, Harvard, Vancouver, ISO, etc.

Scarpa, E., T. Dattoma, P. Calcagnile, et al. "Surface-tension-confined fluidics on Parylene C coated paper substrate." In 2017 IEEE 17th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2017. http://dx.doi.org/10.1109/nano.2017.8117418.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Tondon, Abhishek, and Roland Kaunas. "The Direction of Cyclic Stretch-Induced Cell and Stress Fiber Alignment Depends on Matrix Rigidity." In ASME 2013 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/sbc2013-14794.

Texte intégral

Résumé :

We have previously reported that stress fibers (SFs) in cells with normal contractility reorient perpendicular to the direction of cyclic stretch [1], while cells treated with inhibitors of myosin light-chain kinase (MLCK) or members of the Rho GTPase pathway oriented parallel to the direction of stretch [1, 2]. Our theoretical modeling predicts that myosin II acts as a tension sensor acting to maintain SF tension through sliding along actin filaments under low strain rates or promoting SF reorientation under high strain rates [3]. This model predicts that SFs on stiff elastic substrates are a

Styles APA, Harvard, Vancouver, ISO, etc.

Jagodnik, John J., and Sinan Mu¨ftu¨. "A Model for Analyzing Multi-Asperity Contact of Thin Sheets With Real Surfaces on Both Sides." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63862.

Texte intégral

Résumé :

A model for two-sided contact of a thin sheet of material, with real surfaces on both sides is presented. The model combines cylindrical-contact equations, with Euler-Bernoulli beam theory to examine the importance of substrate rigidity in two-sided contact problems. A finite difference program for solving this model is developed. Results for two-sided contact of numerically generated surfaces on thin tapes are presented. The effects of tape thickness and tension are explored. It is shown that substrate’s bending rigidity contributes significantly to the overall equilibrium, for typical tape t

Styles APA, Harvard, Vancouver, ISO, etc.

Burke, D., and D. J. Kelly. "Could Substrate Stiffness and Oxygen Tension Regulate Stem Cell Differentiation During Fracture Healing?" In ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-53418.

Texte intégral

Résumé :

Extrinsic mechanical signals have been implicated as key regulators of Mesenchymal Stem Cell (MSC) differentiation [1]. It has been possible to test different hypotheses for mechano-regulated differentiation by attempting to simulate regenerative events such as bone fracture repair [2]. During such events, repeatable spatial and temporal patterns of tissue differentiation occur. More recently, in vitro studies have identified other environmental cues, such as substrate stiffness [3] and oxygen tension [4], as key regulators of MSC differentiation. The hypothesis of this study is that a computa

Styles APA, Harvard, Vancouver, ISO, etc.

Scholz, Daniel, and Paul Simutis. "Understanding interfaces: Using contact angle measurements to determine surface tension, interfacial tension, and kinetic properties from contact angle hysteresis." In 2022 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2022. http://dx.doi.org/10.21748/tjyy3220.

Texte intégral

Résumé :

When there is an interface between a liquid and a solid, the angle between the surface of the liquid and the baseline of the contact surface is described as the contact angle. The contact angle is a measure of the wettability of a solid by a liquid. Measurement of the contact angle helps in all situations where solids and liquids meet and there is benefit gained by control of wetting and adhesion properties. Applications where contact angle values are especially important include development of hydrophobic or hydrophilic surface coatings, paints and varnishes, cleaning agents, printing process

Styles APA, Harvard, Vancouver, ISO, etc.

Robu, A., A. Neagu, and L. Stoicu-Tivadar. "The influence of cell-substrate and cell-medium interfacial tension on the cell spreading." In 2011 15th IEEE International Conference on Intelligent Engineering Systems (INES). IEEE, 2011. http://dx.doi.org/10.1109/ines.2011.5954714.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Substrate of tension"

Lovell, Alexis, Garrett Hoch, Christopher Donnelly, Jordan Hodge, Robert Haehnel, and Emily Asenath-Smith. Shear and tensile delamination of ice from surfaces : The Ice Adhesion Peel Test (IAPT). Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/41781.

Texte intégral

Résumé :

For decades, researchers have sought to understand the adhesion of ice to surfaces so that low-cost ice mitigation strategies can be developed. Presently, the field of ice adhesion is still without formal standards for performing ice adhesion tests. The U.S. Army Corps Engineers’ Research and Development Center’s Cold Regions Research and Engineering Laboratory (ERDC-CRREL) has a longstanding history as an independent third party for ice adhesion testing services. Most notably, CRREL’s Zero-Degree Cone Test (ZDCT) has been an industry favorite for more than 30 years. Despite its wide acceptanc

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!