Littérature scientifique sur le sujet « Surface modification of 3D printed parts »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Surface modification of 3D printed parts ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Surface modification of 3D printed parts":
Stoklasek, Pavel, Milan Navratil, Martin Bednarik, Ivan Hudec et Dalibor Petrzelka. « Flexural behaviour of ABS 3D printed parts on professional printer Stratasys Fortus 900mc ». MATEC Web of Conferences 210 (2018) : 04048. http://dx.doi.org/10.1051/matecconf/201821004048.
Donate, Ricardo, María Elena Alemán-Domínguez et Mario Monzón. « On the Effectiveness of Oxygen Plasma and Alkali Surface Treatments to Modify the Properties of Polylactic Acid Scaffolds ». Polymers 13, no 10 (18 mai 2021) : 1643. http://dx.doi.org/10.3390/polym13101643.
Francis, Vishal, et Prashant K. Jain. « Investigation on the effect of surface modification of 3D printed parts by nanoclay and dimethyl ketone ». Materials and Manufacturing Processes 33, no 10 (17 novembre 2017) : 1080–92. http://dx.doi.org/10.1080/10426914.2017.1401717.
Sajadi, Seyed Mohammad, Lívia Vásárhelyi, Reza Mousavi, Amir Hossein Rahmati, Zoltán Kónya, Ákos Kukovecz, Taib Arif et al. « Damage-tolerant 3D-printed ceramics via conformal coating ». Science Advances 7, no 28 (juillet 2021) : eabc5028. http://dx.doi.org/10.1126/sciadv.abc5028.
Ashkenazi, Dana, Alexandra Inberg, Yosi Shacham-Diamand et Adin Stern. « Gold, Silver, and Electrum Electroless Plating on Additively Manufactured Laser Powder-Bed Fusion AlSi10Mg Parts : A Review ». Coatings 11, no 4 (6 avril 2021) : 422. http://dx.doi.org/10.3390/coatings11040422.
Leite, Marco, André Varanda, António Relógio Ribeiro, Arlindo Silva et Maria Fátima Vaz. « Mechanical properties and water absorption of surface modified ABS 3D printed by fused deposition modelling ». Rapid Prototyping Journal 24, no 1 (2 janvier 2018) : 195–203. http://dx.doi.org/10.1108/rpj-04-2016-0057.
Han, Ningda, Jun Cheng, Jiquan Yang, Yijian Liu et Wuyun Huang. « Design and Implementation of 3D Printing System for Continuous CFRP Composites ». MATEC Web of Conferences 213 (2018) : 01011. http://dx.doi.org/10.1051/matecconf/201821301011.
Kuznetsov, Tavitov, Urzhumtsev, Mikhalin et Solonin. « Design and Fabrication of Strong Parts from Poly (Lactic Acid) with a Desktop 3D Printer : A Case with Interrupted Shell ». Polymers 11, no 5 (30 avril 2019) : 760. http://dx.doi.org/10.3390/polym11050760.
Sedlák, Josef, Adam Glváč et Andrej Czán. « Design of stirling engine operating at low temperature difference ». MATEC Web of Conferences 157 (2018) : 04003. http://dx.doi.org/10.1051/matecconf/201815704003.
Okarma, Krzysztof, Jarosław Fastowicz, Piotr Lech et Vladimir Lukin. « Quality Assessment of 3D Printed Surfaces Using Combined Metrics Based on Mutual Structural Similarity Approach Correlated with Subjective Aesthetic Evaluation ». Applied Sciences 10, no 18 (9 septembre 2020) : 6248. http://dx.doi.org/10.3390/app10186248.
Thèses sur le sujet "Surface modification of 3D printed parts":
Barinka, Michal. « Modifikace povrchu materiálu vytvořeného technikou SLM ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-449795.
Lu, Shirley Suet-Ning. « Improving surface quality of SLA 3D printed parts via controlled dip-coating ». Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119948.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 35).
3D printing is useful for rapid prototyping, and is quickly becoming an option to aid in mass manufacturing, whether to make low-volume molds for injection molding and thermoforming or to make unique fixtures. 3D printing via stereo lithographic apparatus (SLA) builds parts by curing photopolymer resins layer by layer. SLA 3D printing is often chosen for its relatively high quality surface finish. However, the average surface roughness of SLA 3D printed parts is in the range of 0.4 to 2 [mu], which is relatively rough compared to that of polishing/finishing processes, typically 0.1 to 0.4 gm. Therefore, the objective of this research is to determine whether controlled dipcoating can be used to improve surface quality of SLA 3D printed parts. Contact profilometer data was collected for SLA 3D printed parts that were dip-coated with varying withdrawal speeds (1 mm/s, 5 mm/s, 0.1 mm/s), printed with different resolutions (0.05 mm, 0.1 mm, 0.2 mm), and angled (0, 15, 30, 45, 60, 75 degrees from vertical). The results suggest that dip-coating is an effective means of improving surface quality, achieving 0.3 to 0.5 micron range of surface roughness. However, validating the effect of withdrawal speed and print resolution as well as how print orientation and geometry can be optimized with dip-coating require further study. The results showed that, in general, dip-coating with faster withdrawal speeds tended to give lower surface roughness, and printing at 0.2 mm resolution gave greatest improvement in surface quality, achieving approximately the same surface quality as the dip-coated 0.05 mm resolution parts. Dip-coating appears to increase surface waviness due to the drainage effect of the dip-coating dominating over the layer by layer print periodicity.
by Shirley Suet-Ning Lu.
S.B.
Chapitres de livres sur le sujet "Surface modification of 3D printed parts":
Ahmad, Mohd Nazri, Mohd Hidayat Ab Rahman, Nurul Ain Maidin, Mohd Hairizal Osman, Mohammad Khalid Wahid, Hussin Mohamed Saiful Firdaus et Nur Afifah Abd Aziz. « Optimization on Surface Roughness of Fused Deposition Modelling (FDM) 3D Printed Parts Using Taguchi Approach ». Dans Lecture Notes in Mechanical Engineering, 230–43. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-9539-0_24.
Maidin, S., E. Pei et M. K. Muhamad. « A Novel Approach of Using Ultrasound to Improve the Surface Quality of 3D Printed Parts ». Dans Additive Manufacturing, 241–62. First edition. | Boca Raton, FL : CRC Press/Taylor & Francis Group, 2018. : CRC Press, 2018. http://dx.doi.org/10.1201/b22179-7.
Mahamood, Rasheedat M., Mukul Shukla et Sisa Pityana. « Laser Additive Manufacturing in Surface Modification of Metals ». Dans 3D Printing, 183–203. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-1677-4.ch010.
Mahamood, Rasheedat M., Mukul Shukla et Sisa Pityana. « Laser Additive Manufacturing in Surface Modification of Metals ». Dans Surface Engineering Techniques and Applications, 222–48. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-5141-8.ch007.
Malik, Fasih Munir, Syed Faiz Ali, Burak Bal et Emin Faruk Kececi. « Determination of Optimum Process Parameter Values in Additive Manufacturing for Impact Resistance ». Dans Additive Manufacturing Technologies From an Optimization Perspective, 221–34. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-9167-2.ch011.
Actes de conférences sur le sujet "Surface modification of 3D printed parts":
Panin, Alexey, Marina Kazachenok, Sergey Martynov et Artem Builuk. « Surface modification of 3D-printed Ti–6Al–4V parts by continuous electron beam ». Dans PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. Author(s), 2018. http://dx.doi.org/10.1063/1.5083468.
Sidhu, Kuldeep Singh, Jing Shi, Vijay K. Vasudevan et Seetha Ramaiah Mannava. « Residual Stress Enhancement in 3D Printed Inconel 718 Superalloy Treated by Ultrasonic Nano-Crystal Surface Modification ». Dans ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2918.
Ok, Jeongbin, et Daniel Scudder. « Emotive qualities of parametrically designed and 3D printed surfaces ». Dans Systems & Design : Beyond Processes and Thinking. Valencia : Universitat Politècnica València, 2016. http://dx.doi.org/10.4995/ifdp.2016.3281.
Yang, Yang, Ichiro Hagiwara, Luis Diago et Junichi Shinoda. « An Origami Crease Pattern Generating Methodology for “Origami 3D Printer” ». Dans ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97715.
Tanaka, Martin L., et Jeremy J. Smith. « Utilizing Design for Metal Additive Manufacturing and Topology Optimization to Improve Product Designs ». Dans ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10633.
Biglete, Emmanuelle R., Mark Christian E. Manuel, Jennifer C. Dela Cruz, Marvin S. Verdadero, John Michael B. Diesta, Daniel Niko G. Miralpez, Ryan Angelo C. Javier et Jemuel Ian C. Picato. « Surface Roughness Analysis of 3D Printed Parts Using Response Surface Modeling ». Dans 2020 11th IEEE Control and System Graduate Research Colloquium (ICSGRC). IEEE, 2020. http://dx.doi.org/10.1109/icsgrc49013.2020.9232561.
Biglete, Emmanuelle R., Jennifer C. Dela Cruz, Marvin S. Verdadero, Mark Christian E. Manuel, Allison R. Altea, Argel Joseph O. Lubi, Allan Gabriel R. Gatpayat et Christian Dale B. Santos. « Dimensional Accuracy Evaluation of 3D - Printed Parts Using a 3D Scanning Surface Metrology Technique ». Dans 2020 11th IEEE Control and System Graduate Research Colloquium (ICSGRC). IEEE, 2020. http://dx.doi.org/10.1109/icsgrc49013.2020.9232583.
Kovan, V., G. Altan, E. S. Topal et H. E. Camurlu. « Surface Roughness Effect on the 3d Printed Butt Joints Strength ». Dans BALTTRIB 2015. Aleksandras Stulginskis University, 2015. http://dx.doi.org/10.15544/balttrib.2015.21.
Bhaduri, D., P. Penchev, S. S. Dimov et S. L. Soo. « Improving the Surface Integrity of 3D Printed Stainless Steel Parts by Laser Polishing ». Dans Proceedings of the 4M/ICOMM2015 Conference. Singapore : Research Publishing Services, 2015. http://dx.doi.org/10.3850/978-981-09-4609-8_140.
Palanisamy, Chockalingam, et Ganesh Kumar Krishnan. « Experimental classification and response surface modelling of compression property of 3D printed polylactic acid parts ». Dans PROCEEDINGS OF GREEN DESIGN AND MANUFACTURE 2020. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0044289.