Littérature scientifique sur le sujet « Tie lu sui dao »

The main purposes of the present study are to evaluate pilot grouting and to develop regression equations for prediction of grout intake. There are no permeability problems with the sandstone-siltstone-claystone alternations and basement clayey limestone at the dam site. Karstic limestone block is permeable due to karstification and heavy discontinuities. For the purpose of the study, Q system, geological strength index (GSI), secondary permeability index (SPI), joint spacing (JSP), joint apertures (Ap), Lugeon (Lu), and the permeability coefficient (k) were determined. Karstic limestone block rock mass properties correlated with grouting material amount. A series of simple and multiple nonlinear regression analyses was performed between grout take material amount (Gt) and average values of these rock mass properties. Significant determination coefficients were determined. Prediction capacity of the empirical equations were also examined with root mean square error (RMSE), values account for (VAF), mean absolute percentage error (MAPE), and prediction error evaluations. Considering simple regression analyses, the equation derived with Gt-SPI gives the best performance. The best prediction is determined with the equation derived with rock quality designation values (RQD), SPI, and joint aperture as input parameters with the multiple nonlinear regression analysis, in addition to this, other empirical equations also provide acceptable results.

Traditional Chinese medicine (TCM) divides fracture treatment into three stages. Many TCM herbs and formulas have been used to treat fractures for thousands of years. However, research regarding the Chinese herbal products (CHPs) that should be used at different periods of treatment is still lacking. This study aims to identify the CHPs that should be used at different periods of treatment as well as confirm the TCM theory of fracture periods medicine. We used prescriptions of TCM outpatients with fracture diagnoses analyzed using the Chang Gung Research Database (CGRD) from 2000 to 2015. According to the number of days between the date of the fracture and the clinic visit date, all patients were assigned to one of three groups. Patients with a date gap of 0-13 days were assigned to the early period group; those with a date gap of 14-82 days were assigned to the middle period group; and those with a date gap of 83-182 days were assigned to the late period group. We observed the average number of herbal formulas prescribed by the TCM doctor at each visit was 2.78, and the average number of single herbs prescribed was 6.47. The top three prescriptions in the early fracture period were Zheng-gu-zi-jin-dang, Shu-jing-huo-xue-tang, and Wu-ling-san. In the middle fracture period, the top three formulas were Zheng-gu-zi-jin-dang, Shu-jing-huo-xue-tang, and Zhi-bai-di-huang-wan. In the late fracture period, the top three formulas were Shu-jing-huo-xue-tang, Gui-lu-er-xian-jiao, and Du-huo-ji-sheng-tang. The main single herbs used in the early fracture period were Yan-hu-suo, Gu-sui-bu, and Dan-shen. From the middle to the late period, the most prescribed single herbs were Xu-duan, Gu-sui-bu, and Yan-hu-suo. We concluded that the results showed that the CGRD utilization pattern roughly meets the TCM theory at different fracture periods.

Rechargeable post Li-ion batteries based on aluminum (Al) are gaining attention due to high abundance of Al, the high theoretical volumetric capacity, and high safety associated with the low flammability [1,2]. In comparison to Li-ion batteries (LiBs), where the solid-electrolyte interphase (SEI) has been studied for decades, little is known on SEI formation in dependence of the used electrolyte for Al electrodes. In this study, we present the electrochemical performance of Al foils with two different thicknesses (0.025 mm and 0.075 mm), which were used as negative electrode in Al-ion batteries in AlCl3/1-ethyl-3-methylimidazolium chloride [EMIm]Cl electrolyte. Atomic force microscopy (AFM) was used to determine changes in the morphology of Al foils during the charge - discharge process to obtain information on the SEI and its microstructural morphology [3]. Spatially-resolved information on the electrochemical activity of interphase layers on cycled Al foils can be obtained via scanning electrochemical microscopy (SECM), which so far has only be studied at LiBs [4]. First results reveal the correlation between the morphological changes of SEI layer during cycling and its electrochemical behavior depending on the Al foil surface properties, which will be presented and discussed in this contribution. Key words: Al foil, AFM, microstructure, SEI layer, SECM. References: Meng-Chang Lin, Ming Gong, Bingan Lu, Yingpeng Wu, Di-Yan Wang, Mingyun Guan, Michael Angell, Changxin Chen, Jiang Yang, Bing-Joe Hwang and Hongjie Dai, Nature, 520, 325–328 (2015). Li, and N.J. Bjerrum, J. Power Sources, 110, 1–10 (2002). Feng Wu, Na Zhu, Ying Bai, Yaning Gao, and Chuan Wu, Green Energy & Environment 3, 71-77, (2018). Bastian Krueger, Luis Balboa, Jan Frederik Dohmann, Martin Winter, Peter Bieker and Gunther Wittstock. ChemElectroChem,7, 3590–3596, (2020). This work contributes to the research performed at CELEST (Center for Electrochemical Energy Storage Ulm-Karlsruhe) and was funded by the German Research Foundation (DFG) under Project ID 390874152 (POLiS Cluster of Excellence).

Lithium-ion batteries (LIBs) and alkaline batteries have been widely used in electric vehicles and portable electronics, dominating the energy storage market for decades,[1] but their recycling/upcycling has lagged far behind. Re/up-cycling batteries is urgently needed because it can not only preserve raw materials such as Li, Co, Ni, Mn, Al, and Cu for LIBs as well as Zn, Mn, Fe for alkaline batteries but also reduce hazardous wastes towards the environment.[2] Despite previous efforts made on re/up-cycling LIBs and alkaline batteries, there remains an urgent demand for simple, economic, environmentally benign, and energy-saving approaches. For LIB recycling, the dominated recycling methods including pyrometallurgy and hydrometallurgy are destructive and criticized of high energy consumption, undesirable economic outputs, and water contamination. By contrast, non-destructive methods such as solid-state sintering[3] and hydrothermal treatment coupled with short annealing (HT-SA) [4-5]are more promising. However, these emerged direct recycling approaches are deficient at regenerating outdated cathode materials to meet current market need. As such, upcycling (i.e., upgraded regeneration of cathodes) through surface engineering (coating[6] and doping[7-9]) or bulk reconstruction[10] has been developed. In our work, we demonstrate one upcycling approach to regenerate LiCoO2 cathode through an improved HT-SA approach in which a coating layer is prepared accompanied with the regeneration process. The upcycled cathode material shows improved electrochemical performance surpassing the pristine electrode materials. For alkaline battery recycling, the major recycling still focuses on hydrometallurgy and pyrometallurgy. Hydrometallurgical processes generally follow different steps of pre-treatment and subsequent leaching and separation of different metals by electrolysis, extraction or precipitation.[11] Another approach for treating spent alkaline battery materials is upcycling towards other applications such as supercapacitors,[12] catalysis[13], micronutrient fertilizer,[14] Mn alloy fabrication.[14] In our work, for the first time, we directly upcycle both zinc anode and Mn-based cathode for their use in rechargeable Zn-MnO2 batteries by a simple yet efficient annealing procedure. Zn was regenerated in a reductive atmosphere and the regenerated Zn shows high Coulombic efficiency and long life in symmetric cells while the regenerated Mn-based cathode shows superior performance than fresh MnO2 with regards to capacity, rate, and life. Under optimized N/P ratio, the regenerated Zn and MnO2 was paired to make rechargeable Zn-MnO2 batteries delivering excellent performance, comparable or even superior to state-of-the-art Zn-MnO2 batteries. Reference [1] Li, M.; Lu, J.; Chen, Z.; Amine, K.Advanced Materials 2018, 30, 1800561. [2] Rarotra, S.; Sahu, S.; Kumar, P.; Kim, K.-H.; Tsang, Y. F.; Kumar, V.; Kumar, P.; Srinivasan, M.; Veksha, A.; Lisak, G. ChemistrySelect 2020, 5, 6182. [3] Fan, M.; Chang, X.; Guo, Y.-J.; Chen, W.-P.; Yin, Y.-X.; Yang, X.; Meng, Q.; Wan, L.-J.; Guo, Y.-G., Energy Environ. Sci. 2021, 14 (3), 1461-1468. [4] Xu, P.; Dai, Q.; Gao, H.; Liu, H.; Zhang, M.; Li, M.; Chen, Y.; An, K.; Meng, Y. S.; Liu, P.; Li, Y.; Spangenberger, J. S.; Gaines, L.; Lu, J.; Chen, Z., Joule 2020, 4 (12), 2609-2626. [5] Shi, Y.; Chen, G.; Liu, F.; Yue, X.; Chen, Z., ACS Energy Lett. 2018, 3 (7), 1683-1692. [6] Meng, X.; Cao, H.; Hao, J.; Ning, P.; Xu, G.; Sun, Z., ACS Sustain. Chem. Eng. 2018, 6 (5), 5797-5805. [7] Wu, J.; Lin, J.; Fan, E.; Chen, R.; Wu, F.; Li, L., ACS Appl. Energy Mater. 2021, 4 (3), 2607-2615. [8] Fan, X.; Tan, C.; Li, Y.; Chen, Z.; Li, Y.; Huang, Y.; Pan, Q.; Zheng, F.; Wang, H.; Li, Q. J. Hazard. Mater. 2021, 410, 124610. [9] Xu, B.; Dong, P.; Duan, J.; Wang, D.; Huang, X.; Zhang, Y., Ceram. Int. 2019, 45 (9), 11792-11801. [10] Gaines, L.; Dai, Q.; Vaughey, J. T.; Gillard, S. Recycling 2021, 6 (2). [11] Ferella, F.; De Michelis, I.; Vegliò, F. Journal of Power Sources 2008, 183, 805. [12] Farzana, R.; Hassan, K.; Sahajwalla, V.Scientific Reports 2019, 9, 8982. [13] Gallegos, M. V.; Falco, L. R.; Peluso, M. A.; Sambeth, J. E.; Thomas, H. J.Waste Management 2013, 33, 1483. [14] Hu, X.; Robles, A.; Vikström, T.; Väänänen, P.; Zackrisson, M.; Ye, G., Journal of Hazardous Materials 2021, 411, 124928.

Novel Coronavirus 2019 (covid-19) is a generation of the coronavirus that humans have never identified. This virus was first reported to cause an outbreak in Wuhan, China, in December 2019. Until now, covid-19 infection cases have been reported in many countries, such as Thailand, Japan, South Korea, Iran, Italy, Germany, and more than 90 countries worldwide. Until November 1, 2020, a total of 412.784 positive cases of covid-19 were recorded, with 341.942 recovered patients and 13.943 deaths in Indonesia. The purpose of this event is to anticipate the spread of Covid-19 by reminding the public to maintain health protocols and other alternatives in preserving health, also increasing body immunity through massage and traditional Indonesian herbal medicine. This event received a good response from the public. It was evidenced by the number of participants exceeding the predetermined quota and enthusiastic in following the speaker's material. The event was a success and was well received by the participants as well as the local government. After following this event, participants can practise the knowledge obtained from the presenters to maintain and protect their health and immunity from Covid-19. Keywords: Covid-19, Community service, body immunity DAFTAR PUSTAKA Amri, Sofan. Iif Khoiru Ahmadi. 2010. Proses Pembelajaran Kreatif dan Inovatif Dalam Kelas: Metode, Landasan Teoritis-Praktis dan Penerapannya. Jakarta: PT. Prestasi Pustakaraya. Badan Pusat Statistik Kota Surabaya. “Jumlah RT RW Kecamatan Dukuh Pakis Menurut Kelurahan Tahun 2017”. surabayakota.bps.go.id. https://surabayakota.bps.go.id/statictable/2018/04/19/594/jumlah-rt-rw-kecamatan-dukuh-pakis-menurut-kelurahan-tahun-2017.html. (diakses 15 Desember 2020). Huang C, Wang Y, Li X, Ren L, Zhao J, Hu Y, Zhang L, Fan G, Xu J, Gu X, Cheng Z. 2020. “Clinical features of patients infected with 2019 novel coronavirus in Wuhan, China”. Lancet 2020: 395: 497-506. doi: https://doi.org/10.1016/S0140-6736(20)30183-5. Kementerian Kesehatan Republik Indonesia. 2020. Pedoman Kesiapsiagaan Menghadapi Coronavirus Disease (covid-19). Jakarta: Direktorat Jenderal Pencegahan dan Pengendalian Penyakit (P2P). Komite Penanganan Covid-19 dan Pemulihan Ekonomi Nasional. “Pasien Sembuh Harian Mencapai 4.141 Orang”. covid19.go.id. https://covid19.go.id/berita/pasien-sembuh-harian-mencapai-4141-orang. (diakses 15 Desember 2020). Kumar, M., & Dwivedi, S. 2020. “Impact of Coronavirus Imposed Lockdown on Indian Population and their Habits”. International Journal of Science and Healthcare Research Vol.5 Issue: 2: April-June 2020. ISSN: 2455-7587. Li, S., Wang, Y., Xue, J., Zhao, N., & Zhu, T. 2020. “The impact of covid-19 epidemic declaration on psychological consequences: A study on active weibo users”. International Journal of Environmental Research and Public Health, 17(6), 1–9. doi: https://doi.org/10.3390/ijerph17062032. Pemerintah Kota Surabaya, “Statistik”. lawancovid-19.surabaya.go.id. https://lawancovid-19.surabaya.go.id/visualisasi/graph. (diakses 15 Desember 2020). Rizma Riyandi. “Data Kecamatan Surabaya: Dukuh Pakis, Penduduk dan Wilayah”. ayosurabaya.com. https://www.ayosurabaya.com/read/2020/09/28/3230/data-kecamatan-surabaya-dukuh-pakis-penduduk-dan-wilayah. (diakses 15 Desember 2020). Zhu N, Zhang D, Wang W, Li X, Yang B, Song J, Zhao X, Huang B, Shi W, Lu R, Niu P. 2020. “A novel coronavirus from patients with pneumonia in China, 2019”. New England Journal of Medicine 2020: 382: 727-733. doi: 10.1056/NEJMoa2001017

Knowledge about clean and healthy life in children needs to be given early to shape behavior in everyday life. Knowledge about healthy living can be provided at school through various learning programs. This study aims to find the effectiveness of health promotion programs (JUMSIH) to increase children's knowledge about clean and healthy living. The research method is a pre-experimental one-shot case study design. The respondents of this study were 68 students aged 7-8 years. The results showed that the JUMSIH program can help children have knowledge about healthy living. Based on data analysis, n = 15 generally obtained scores above 2.6. It was concluded that healthy living skills are often performed by students such as hand washing, bathing, and toothbrush behavior which are basic skills for children to be able to live healthy lives. Suggestions for further research which is the development of various programs to increase awareness of clean and healthy living from an early age. Keywords: Clean and healthy life Knowledge, Early Childhood, Health Promotion Program (JUMSIH) References: Akçay, N. O. (2016). Implementation of Cooperative Learning Model in Preschool. Journal of Education and Learning, 5(3), 83–93. https://doi.org/10.5539/jel.v5n3p83 Allport, B. S., Johnson, S., Aqil, A., Labrique, A. B., Nelson, T., KC, A., … Marcell, A. V. (2018). Promoting Father Involvement for Child and Family Health. Academic Pediatrics, 18(7), 746–753. https://doi.org/10.1016/j.acap.2018.03.011 Bonuck, K. A., Schwartz, B., & Schechter, C. (2016). Sleep health literacy in head start families and staff: Exploratory study of knowledge, motivation, and competencies to promote healthy sleep. Sleep Health, 2(1), 19–24. https://doi.org/10.1016/j.sleh.2015.12.002 Considerations, P., & Framework, N. Q. (2010). Health , Hygiene and Infection Control Strategies for Policy Implementation :2010(Vic). Conti, G., Heckman, J. J., & Pinto, R. (2016). The Effects of Two Influential Early Childhood Interventions on Health and Healthy Behaviour. Economic Journal, 126(596), F28–F65. https://doi.org/10.1111/ecoj.12420 Creswell, J. W. (2012). Educational Research Planning, Conducting, and Evaluating Quantitative and Qualitative Research(4th ed.; P. A. Smith, Ed.). Boston: Pearson. Duxbury, T., Bradshaw, K., Khamanga, S., Tandlich, R., & Srinivas, S. (2019). Environmental health promotion at a National Science Festival: An experiential-education based approach. Applied Environmental Education and Communication, 0(0), 1–16. https://doi.org/10.1080/1533015X.2019.1567406 Fernandez-Jimenez, R., Al-Kazaz, M., Jaslow, R., Carvajal, I., & Fuster, V. (2018). Children Present a Window of Opportunity for Promoting Health: JACC Review Topic of the Week. Journal of the American College of Cardiology, 72(25), 3310–3319. https://doi.org/10.1016/j.jacc.2018.10.031 Fung, C., Kuhle, S., Lu, C., et al. (2012). From “best practice” to “next practice”: the effectiveness of school-based health promotion in improving healthy eating and physical activity and preventing childhood obesity. Int. J. Behav. Nutr. Phys. Act., 9, 27. Gall, M. D., Gall, J. P., & Borg, W. R. (2007). Educational Research: An Introduction (4th ed.). New York: Longman Inc. Goldfeld, S., O’Connor, E., O’Connor, M., Sayers, M., Moore, T., Kvalsvig, A., & Brinkman, S. (2016). The role of preschool in promoting children’s healthy development: Evidence from an Australian population cohort. Early Childhood Research Quarterly, 35, 40–48. https://doi.org/10.1016/j.ecresq.2015.11.001 Hawe, P., Potvin, L. (2009). What is population health intervention research. Can. J. Public Health, 100 (Suppl I8–14). Julianti, R., Nasirun, M., & Wembrayarli. (2018). Pelaksanaan Perilaku Hidup Bersih dan Sehat (PHBS) di Lingkungan Sekolah. Jurnal Ilmiah Potensia, 3(1), 11–17. Kasnodihardjo, K. (2010). Metode pelembagaan perilaku hidup sehat kaitannya dengan kesehatan lingkungan dan hygiene perorangan pada keluarga di Subang Jabar. Keshavarz, N., Nutbeam, D., Rowling, L., Khavarpour, F. (2010). Schools as social complex adaptive systems: a new way to understand the challenges of introducing the health promoting schools concept. Soc. Sci. Med., (70), 1467–1474. Kobel, S., Wartha, O., Wirt, T., Dreyhaupt, J., Lämmle, C., Friedemann, E. M., … Steinacker, J. M. (2017). Design, implementation, and study protocol of a kindergarten-based health promotion intervention. BioMed Research International, 2017. https://doi.org/10.1155/2017/4347675 Langford, R., Bonell, C.P., Jones, H. E. (2014). The WHO health promoting school framework for improving the health and well-being of students and their academic achievement. Cochrane Database Syst, Rev. 4, CD008958. Manning, M. L., & Lucking, R. (1991). The what, why, and how of cooperative learning. The Clearing House. 64(3), 152–156. Marlina, R. L. (2011). Analisis Manajemen Promosi Kesehatan Dalam Penerapan Perilaku Hidup Bersih dan Sehat (PHBS) Tatanan Rumah Tangga di Kota Padang Tahun 2011. Padang: Universitas Andalas. Maryunani, A. (2013). Perilaku Hidup Bersih dan Sehat. Jakarta: Trans Info Media. McClure, M., Tarr, P., Thompson, C. M., & Eckhoff, A. (2017). Defining quality in visual art education for young children: Building on the position statement of the early childhood art educators. Arts Education Policy Review, 118(3), 154–163. https://doi.org/10.1080/10632913.2016.1245167 Mcisaac, J. D., Sim, S. M., Penney, T. L., & Kirk, S. F. L. (2012). School Health Promotion Policy in Nova Scotia: A Case Study. Revue PhénEPS / PHEnex Journal, 4(2). McIsaac, J. L. D., Penney, T. L., Ata, N., Munro-Sigfridson, L., Cunningham, J., Veugelers, P. J., … Kuhle, S. (2017). Evaluation of a health promoting schools program in a school board in Nova Scotia, Canada. Preventive Medicine Reports, 5, 279–284. https://doi.org/10.1016/j.pmedr.2017.01.008 Midcentraldhb. (2014). Health and Safety Guidelines for Early Childhood Education Services. https://doi.org/2014 Mikkonen, J., Raphael, D. (2010). Social Determinants of Health: The Canadian Facts. University School of Health Policy and Management Toronto. Proverawati, A. (2012). Perilaku Hidup Bersih dan Sehat. Yogyakarta: Nuha Medika. Reed, K.E., Warburton, D.E., Macdonald, H.M., Naylor, P.J., McKay, H. A. (2008). Action Schools! BC: a school-based physical activity intervention designed to decrease cardiovascular disease risk factors in children. Prev. Med, 46, 525–531. Samdal, O., Rowling, L. (2011). Theoretical and empirical base for implementation components of health-promoting schools. Health Educ., 111, 367–390. Syukriyah, E. (2011). Gambaran Pengetahuan, Sikap dan Tindakan Murid SD Tentang PHBS di SDN 06 Lubuk LayangPadang. Padang: Poletkkes Kemenkes Padang. Veugelers, P. J., & Schwartz, M. E. (2010). Comprehensive school health in Canada. Canadian Journal of Public Health = Revue Canadienne de Sante Publique, 101 Suppl(August), S5-8. https://doi.org/10.17269/cjph.101.1907 WHO. (2016). What is a health promoting school? WIjayanti, N. A. (2017). Implementation of Role Playing Method in the Hygiene Hadith Learning Toward Early CHildrens Healthy Behavior of Group B in Dabin Aggrek Gunungpati Semarang. Early Childhood Education Papers (Belia), 6(2).

In this paper, miniaturized design of a plasmonic Bragg grating filter is investigated via the finite element method (FEM). The filter is based on a plasmonic metal-insulator-metal waveguide deposited on a quartz substrate. The corrugated Bragg grating designed for near-infrared wavelength range is structured on both sides of the waveguide. The spectral characteristics of the filter are studied by varying the geometric parameters of the filter design. As a result, the maximum ER and bandwidth of 36.2 dB and 173 nm is obtained at λBragg=976 nm with a filter footprint of as small as 1.0 x 8.75 µm2, respectively. The ER and bandwidth can be further improved by increasing the number of grating periods and the strength of the grating, respectively. Moreover, the Bragg grating structure is quite receptive to the refractive index of the medium. These features allow the employment of materials such as polymers in the metal-insulator-metal waveguide which can be externally tuned or it can be used for refractive index sensing applications. The sensitivity of the proposed Bragg grating structure can offer a sensitivity of 950 nm/RIU. We believe that the study presented in this paper provides a guideline for the realization of small footprint plasmonic Bragg grating structures which can be employed in filter and refractive index sensing applications. Full Text: PDF ReferencesJ. W. Field et al., "Miniaturised, Planar, Integrated Bragg Grating Spectrometer", 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference (CLEO/Europe-EQEC), Munich, Germany, 2019, CrossRef L. Cheng, S. Mao, Z. Li, Y. Han, H.Y. Fu, "Grating Couplers on Silicon Photonics: Design Principles, Emerging Trends and Practical Issues", Micromachines, 11, 666 (2020). CrossRef J. Missinne, N. T. Beneitez, M-A. Mattelin, A. Lamberti, G. Luyckx, W. V. Paepegem, G. V. Steenberge, "Bragg-Grating-Based Photonic Strain and Temperature Sensor Foils Realized Using Imprinting and Operating at Very Near Infrared Wavelengths", Sensors, 18, 2717 (2018). CrossRef M. A. Butt, S.N. Khonina, N.L. Kazanskiy, "Numerical analysis of a miniaturized design of a Fabry–Perot resonator based on silicon strip and slot waveguides for bio-sensing applications", Journal of Modern Optics, 66, 1172-1178 (2019). CrossRef H. Qiu, J. Jiang, P. Yu, T. Dai, J. Yang, H. Yu, X. Jiang, "Silicon band-rejection and band-pass filter based on asymmetric Bragg sidewall gratings in a multimode waveguide", Optics Letters, 41, 2450 (2016). CrossRef M. A. Butt, S.N. Khonina, N.L. Kazanskiy, "Optical elements based on silicon photonics", Computer Optics, 43, 1079-1083 (2019). CrossRef N. L. Kazanskiy, S.N. Khonina, M.A. Butt, "Plasmonic sensors based on Metal-insulator-metal waveguides for refractive index sensing applications: A brief review", Physica E, 117, 113798 (2020). CrossRef L. Lu et al, "Mode-Selective Hybrid Plasmonic Bragg Grating Reflector", IEEE Photonics Technology Letters, 22, 1765-1767 (2012). CrossRef R. Negahdari, E. Rafiee, F. Emami, "Design and simulation of a novel nano-plasmonic split-ring resonator filter", Journal of Electromagnetic Waves and Applications, 32, 1925-1938 (2018). CrossRef M. Janfaza, M. A. Mansouri-Birjandi, "Tunable plasmonic band-pass filter based on Fabry–Perot graphene nanoribbons", Applied Physics B, 123, 262 (2017). CrossRef C. Wu, G. Song, L. Yu, J.H. Xiao, "Tunable narrow band filter based on a surface plasmon polaritons Bragg grating with a metal–insulator–metal waveguide", Journal of Modern Optics, 60, 1217-1222 (2013). CrossRef J. Zhu, G. Wang, "Sense high refractive index sensitivity with bragg grating and MIM nanocavity", Results in Physics, 15, 102763 (2019). CrossRef Y. Binfeng, H. Guohua, C. Yiping, "Design of a compact and high sensitive refractive index sensor base on metal-insulator-metal plasmonic Bragg grating", Optics Express, 22, 28662-28670 (2014). CrossRef A.D. Simard, Y. Painchaud, S. Larochelle, "Small-footprint integrated Bragg gratings in SOI spiral waveguides", International Quantum Electronics Conference Lasers and Electro-Optics Europe, IEEE, Munich, Germany (2013). CrossRef C. Klitis, G. Cantarella, M. J. Strain, M. Sorel, "High-extinction-ratio TE/TM selective Bragg grating filters on silicon-on-insulator", Optics Letters, 42, 3040 (2017). CrossRef J. Ctyroky et al., "Design of narrowband Bragg spectral filters in subwavelength grating metamaterial waveguides", Optics Express, 26, 179 (2018). CrossRef M.A. Butt, N.L. Kazanskiy, S.N. Khonina, "Hybrid plasmonic waveguide race-track µ-ring resonator: Analysis of dielectric and hybrid mode for refractive index sensing applications", Laser Phys., 30, 016202 (2020). CrossRef M. A. Butt, N.L. Kazanskiy, S.N. Khonina, "Label-free detection of ambient refractive index based on plasmonic Bragg gratings embedded resonator cavity sensor", Journal of Modern Optics, 66, 1920-1925 (2019). CrossRef N. L. Kazanskiy, M.A. Butt, Photonics Letters of Poland, 12, 1-3 (2020). CrossRef Z. Guo, K. Wen, Q. Hu, W. Lai, J. Lin, Y. Fang, "Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide", Sensors, 18, 1348 (2018). CrossRef

We present a surface plasmon resonance (SPR) structure based on Kretschmann configuration incorporating bimetallic layers of noble (Ag) and magnetic materials (Ni) over CaF2 prism. Extensive numerical analysis based on transfer matrix theory has been performed to characterize the sensor response considering sensitivity, full width at half maxima, and minimum reflection. Notably, the proposed structure, upon suitably optimizing the thickness of bimetallic layer provides consistent enhancement of sensitivity over other competitive SPR structures. Hence we believe that this proposed SPR sensor could find the new platform for the medical diagnosis, chemical examination and biological detection. Full Text: PDF ReferencesJ. Homola, S.S. Yee, G. Gauglitz, "Surface plasmon resonance sensor based on planar light pipe: theoretical optimization analysis", Sens. Actuators B Chem. 54, 3 (1999). CrossRef X.D. Hoa, A.G. Kirk, M. Tabrizian, "Towards integrated and sensitive surface plasmon resonance biosensors: A review of recent progress", Bioelectron, 23, 151 (2007). CrossRef Z. Lin, L. Jiang, L. Wu, J. Guo, X. Dai, Y. Xiang, D. Fan, "Tuning and Sensitivity Enhancement of Surface Plasmon Resonance Biosensor With Graphene Covered Au-MoS 2-Au Films", IEEE Photonics J. 8(6), 4803308 (2016). CrossRef T. Srivastava, R. Jha, R. Das, "High-Performance Bimetallic SPR Sensor Based on Periodic-Multilayer-Waveguides", IEEE Photonics Technol. Lett. 23(20), 1448 (2011). CrossRef P.K. Maharana, R. Jha, "Chalcogenide prism and graphene multilayer based surface plasmon resonance affinity biosensor for high performance", Sens. Actuators B Chem. 169, 161 (2012). CrossRef R. Verma, B.D. Gupta, R. Jha, "Sensitivity enhancement of a surface plasmon resonance based biomolecules sensor using graphene and silicon layers", Sens. Actuators B Chem. 160, 623 (2011). CrossRef I. Pockrand, "Surface plasma oscillations at silver surfaces with thin transparent and absorbing coatings", Surf. Sci. 72, 577 (1978). CrossRef R. Jha, A. Sharma, "High-performance sensor based on surface plasmon resonance with chalcogenide prism and aluminum for detection in infrared", Opt. Lett. 34(6), 749 (2009). CrossRef E.V. Alieva, V.N. Konopsky, "Biosensor based on surface plasmon interferometry independent on variations of liquid’s refraction index", Sens. Actuators B Chem. 99, 90 (2004). CrossRef S.A. Zynio, A. Samoylov, E. Surovtseva, V. Mirsky, Y. Shirshov, "Bimetallic Layers Increase Sensitivity of Affinity Sensors Based on Surface Plasmon Resonance", Sensors 2, 62 (2002). CrossRef S.Y. Wu, H.P. Ho, "Sensitivity improvement of the surface plasmon resonance optical sensor by using a gold-silver transducing layer", Proceedings IEEE Hong Kong Electron Devices Meeting 63 (2002). CrossRef B.H. Ong, X. Yuan, S. Tjin, J. Zhang, H. Ng, "Optimised film thickness for maximum evanescent field enhancement of a bimetallic film surface plasmon resonance biosensor", Sens. Actuators B Chem. 114, 1028 (2006). CrossRef B.H. Ong, X. Yuan, Y. Tan, R. Irawan, X. Fang, L. Zhang, S. Tjin, "Two-layered metallic film-induced surface plasmon polariton for fluorescence emission enhancement in on-chip waveguide", Lab Chip 7, 506 (2007). CrossRef X. Yuan, B. Ong, Y. Tan, D. Zhang, R. Irawan, S. Tjin, "Sensitivity–stability-optimized surface plasmon resonance sensing with double metal layers", J. Opt. A: Pure Appl. Opt. 8, 959, (2006). CrossRef M. Ghorbanpour, "A novel method for the production of highly adherent Au layers on glass substrates used in surface plasmon resonance analysis: substitution of Cr or Ti intermediate layers with Ag layer followed by an optimal annealing treatment", J. Nanostruct, 3, 309, (2013). CrossRef Y. Chen, R.S. Zheng, D.G. Zhang, Y.H. Lu, P. Wang, H. Ming, Z.F. Luo, Q. Kan, "Bimetallic chips for a surface plasmon resonance instrument", Appl. Opt. 50, 387 (2011). CrossRef N.H.T. Tran, B.T. Phan, W.J. Yoon, S. Khym, H. Ju, "Dielectric Metal-Based Multilayers for Surface Plasmon Resonance with Enhanced Quality Factor of the Plasmonic Waves", J. Electron. Mater. 46, 3654 (2017). CrossRef D. Nesterenko Z. Sekkat, "Resolution Estimation of the Au, Ag, Cu, and Al Single- and Double-Layer Surface Plasmon Sensors in the Ultraviolet, Visible, and Infrared Regions", Plasmonics 8, 1585 (2013). CrossRef M.A. Ordal, R.J. Bell, R.W. Alexander, L.L. Long, M.R. Querry, "Optical properties of fourteen metals in the infrared and far infrared: Al, Co, Cu, Au, Fe, Pb, Mo, Ni, Pd, Pt, Ag, Ti, V, and W.", Appl. Opt. 24, 4493 (1985). CrossRef H. Ehrenreich, H.R. Philipp, D.J. Olechna, "Optical Properties and Fermi Surface of Nickel", Phys. Rev. 31, 2469 (1963). CrossRef S. Shukla, N.K. Sharma, V. Sajal, "Theoretical Study of Surface Plasmon Resonance-based Fiber Optic Sensor Utilizing Cobalt and Nickel Films", Braz. J. Phys. 46, 288 (2016). CrossRef K. Shah, N.K. Sharma, AIP Conf. Proc. 2009, 020040 (2018). [23] G. AlaguVibisha, Jeeban Kumar Nayak, P. Maheswari, N. Priyadharsini, A. Nisha, Z. Jaroszewicz, K.B. Rajesh, "Sensitivity enhancement of surface plasmon resonance sensor using hybrid configuration of 2D materials over bimetallic layer of Cu–Ni", Opt. Commun. 463, 125337 (2020). CrossRef A. Nisha, P. Maheswari, P.M. Anbarasan, K.B. Rajesh, Z. Jaroszewicz, "Sensitivity enhancement of surface plasmon resonance sensor with 2D material covered noble and magnetic material (Ni)", Opt. Quantum Electron. 51, 19 (2019). CrossRef M.H.H. Hasib, J.N. Nur, C. Rizal, K.N. Shushama, "Improved Transition Metal Dichalcogenides-Based Surface Plasmon Resonance Biosensors", Condens.Matter 4, 49, (2019). CrossRef S. Herminjard, L. Sirigu, H. P. Herzig, E. Studemann, A. Crottini, J.P. Pellaux, T. Gresch, M. Fischer, J. Faist, "Surface Plasmon Resonance sensor showing enhanced sensitivity for CO2 detection in the mid-infrared range", Opt. Express 17, 293 (2009). CrossRef M. Wang, Y. Huo, S. Jiang, C. Zhang, C. Yang,T. Ning, X. Liu, C Li, W. Zhanga, B. Mana, "Theoretical design of a surface plasmon resonance sensor with high sensitivity and high resolution based on graphene–WS2 hybrid nanostructures and Au–Ag bimetallic film", RSC Adv. 7, 47177 (2017). CrossRef P.K. Maharana, P. Padhy, R. Jha, "On the Field Enhancement and Performance of an Ultra-Stable SPR Biosensor Based on Graphene", IEEE Photonics Technol. Lett. 25, 2156 (2013). CrossRef

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

Magmas graníticos peraluminosos são gerados por meio da anatexia de rochas crustais em cinturões orogênicos continentais. Os granitos do Cinturão Ribeira Central são relacionados a processos orogênicos de convergência de blocos litosféricos, durante o Neoproterozoico. O Batólito Serra das Araras é um corpo granítico, tabular e peraluminoso localizado no Domínio Paraíba do Sul, região sudoeste no estado do Rio de Janeiro - Brasil. O corpo é alongado na direção NE-SW e sua deformação foi gerada pela atividade de zonas de cisalhamento dúcteis de movimentação preferencial destral, que também controlaram o alojamento do magma granítico. O presente trabalho visa a caracterizar o Batólito Serra das Araras com base em dados de petrografia, de geoquímica de rocha total, de química mineral (EPMA) e de geocronologia U-Pb e LuHf (LA-ICP-MS) em grãos de zircão. Três amostras representativas foram analizadas para obtenção das idades U-Pb de cristalização e de metamorfismo. Essas amostras são compostas de granitos com matriz protomilonítica com muscovita, biotita e granada, um dique sienogranítico com 15-30 cm de espessura e um enclade de quartzo diorito. O plagioclásio possui composição entre oligoclásio (An16) e andesina (An38) e possui núcleos mais enriquecidos em anortita. Todas as amostras apresentam fases ricas em almandina com bordas levemente enriquecidas em manganês, produto do metamorfismo de médio a baixo grau. Os dados isotópicos U-Pb em grãos de zircão revelaram que o magmatismo granítico cristalizou-se ca. 595 Ma e foi gerado no mesmo evento tectono-termal Ediacarano que gerou granitos tipo-I e tipo-S de caráter pós-colisional no Domínio Embu/Paraíba do Sul. Os dados isotópicos de Lu-Hf indicam a reciclagem de crosta juvenil do Riaciano-Orosiriano e de crosta continental do Orosiriano como fontes do protólito metassedimentar do Batólito Serra das Araras. A composição contrastante do enclave de quartzo diorito (amostra SA-06), de caráter metaluminoso e com valores menos degativos de \'\'épsilon\'Hf IND.t\' (entre -5,7 and -8,1), sugere o envolvimento marginal de fontes orto-derivadas da crosta inferior. As idades de cristalização e a composição do batólito indicam que seu magmatismo é correlacionável com granitos peraluminosos do Domínio Embu e do Orógeno Araçuaí.
Peraluminous granitic magmas are produced by anatexis of crustal rocks in continental orogenic belts. Orogenic granites of Central Ribeira Belt are correlated with the collision of lithospheric blocks during Neoproterozoic. The Serra das Araras Batholith is a tabular granitic body of peraluminous composition located at Paraíba do Sul Domain, southwestwards of Rio de Janeiro state - Brazil. The body is elongated at NE-SW direction and its deformation was produced by ductile shear zones with dextral movement component, which has also controlled magma emplacement. The aim of this study is to characterize the Serra das Araras Batholith and to provide petrography, whole-rock geochemistry (major and trace elements), mineral chemistry (EPMA) and combined LA-ICP-MS U-Pb and Lu-Hf isotopic analyses in zircon grains. Three representative samples were analyzed for isotopic determination in order to obtain crystallization and metamorphic U-Pb ages. These samples are composed of monzogranite with protomylonitic texture; a 15-30 cm thick syenogranite dyke and a biotite-hornblende quartz diorite enclave. Plagioclase is Andesine and Oligoclase (An16-38). Anorthite contents display a progressive zoning with rims having lower contents than cores. All samples exhibit almandine-rich phases, with slightly Mg-rich cores and Mn-rich rims, produced by metamorphism of medium to low grade. Zircon U-Pb isotopic data reveal that the batholith was emplaced ca. 595 Ma and was generated at the same middle-Ediacaran tectono-thermal event that generated voluminous I-type and S-type granitoids of post-collisional character at Embu/Paraíba do Sul Domain. Lu-Hf isotopic data suggest that late-Rhyacian to Orosian juvenile and continental crust have been sources of metasedimentary protoliths of Serra das Araras Batholith. The contrasting composition of the quartzdiorite enclave (sample SA-06), of metaluminous character and less negative \'\'épsilon\'Hf IND.t\' values (between - 5.7 and -8.1), suggests a marginal involvement of ortho-derived igneous rocks of the lower crust. The crystallization ages of the granites are coeval with peraluminous granites of Embu Domain and of Araçuaí Belt.