Se connecter

Bibliographies thématiques / Workers workstations / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Workers workstations.

Articles de revues sur le sujet « Workers workstations »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Workers workstations ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Qian, Xiongwen. "A Heuristic-Mixed Genetic Algorithm for Type II Assembly Line Balancing with Multiple Workers in Workstations." Mathematical Problems in Engineering 2022 (March 27, 2022): 1–8. http://dx.doi.org/10.1155/2022/9954518.

Texte intégral

Résumé :

A type II line balancing problem with multiple workers in workstations (mALBP-II) is considered given a total number of workers, group workers, and tasks into workstations so as to minimize cycle time. Different from the manufacturing environment where the traditional assembly line balancing problem (ALBP) rises, manual or semimanual manufacturing enjoys much higher flexibility allowing multiple workers to perform the same set of tasks on workpieces in the same workstation in parallel. The freedom of specifying the number of workers in workstations makes the classic NP-hard ALBP even harder to

Styles APA, Harvard, Vancouver, ISO, etc.

2

Skelly, Donna L. "Assessment of computer workstations for compliance with ergonomic guidelines: A field study." Work 69, no. 3 (2021): 1019–26. http://dx.doi.org/10.3233/wor-213532.

Texte intégral

Résumé :

BACKGROUND: Computer workstation use is a risk factor for the development of musculoskeletal disorders. Governmental guidelines have been developed as a resource for workstation set-up to minimize this risk. The degree of worksite compliance with guidelines has not been examined. OBJECTIVE: The purpose of this study was to examine workstations using the VDT Workstation Checklist to determine compliance, and potential modifications. METHODS: Subjects were recruited from a variety of work settings in Erie, PA. Workstations were assessed with the worker present, using the VDT Workstation Checklis

Styles APA, Harvard, Vancouver, ISO, etc.

3

Khairunnissa, Lydwiza Firdananda Khairunnissa, Nunung Nurhasanah Nurhasanah, and Aprilia Tri Purwandari Purwandari. "<b>Standard Time Measurement and Optimization of the Number of Labor at Ruang Klambi Convection with the Approach of Work Sampling and Work Load Analysis (WLA) </b>." JURNAL TEKNIK INDUSTRI 15, no. 1 (2025): 17–30. https://doi.org/10.25105/jti.v15i1.19851.

Texte intégral

Résumé :

Several companies indirectly give excessive workloads that are considered to increase productivity. Besides workload, the work environment is important in encouraging employees to work optimally. Ruang Klambi Convection does not have a good work system due to the absence of an effective work schedule and poor work environment conditions. This can allow for overload or excessive workload on each worker. The primary motivation for this study is to improve work efficiency at Ruang Klambi Convection, which faces problems of excessive workload and a non-optimal work environment. Through the Work Sa

Styles APA, Harvard, Vancouver, ISO, etc.

4

Solen, I., A. Hasman, J. Troost, H. J. Tange, and M. J. van der Meijden. "Two Patient Care Information Systems in the Same Hospital: Beyond Technical Aspects." Methods of Information in Medicine 42, no. 04 (2003): 423–27. http://dx.doi.org/10.1055/s-0038-1634240.

Texte intégral

Résumé :

Summary Objectives: To compare two clinical workstations in one hospital with respect to technical, organizational, cultural and human factors. One clinical workstation was a GUI to the HIS. The other was an electronic patient record for stroke. Methods: Data were collected by means of in-depth interviews with end-users of both clinical workstations. The interviews were audio taped and transcribed for analysis. Results: End users assessed both clinical workstations as user friendly. Coordination between health care workers was perceived to be enhanced. However, in both situations poor communic

Styles APA, Harvard, Vancouver, ISO, etc.

5

Yao, Wei Xin. "Study on Line Balancing for a Type of Lamp Assembling." Applied Mechanics and Materials 63-64 (June 2011): 751–54. http://dx.doi.org/10.4028/www.scientific.net/amm.63-64.751.

Texte intégral

Résumé :

This paper applied stopwatch to measure the work time of workstations on lamp assembling line. It studied issues effecting line production capability such as bottleneck workstations and superfluous capability. To overcome these shortcomings this paper suggests new line balancing schema. The schema includes reallocation of the work content, adjustment of the equipment and workers of each workstation. This improvement saves extra work shifts and reduces labor cost.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Shikdar, A. A., and M. A. Al-Hadhrami. "Operator Performance and Satisfaction in an Ergonomically Designed Assembly Workstation." Journal of Engineering Research [TJER] 2, no. 1 (2005): 69. http://dx.doi.org/10.24200/tjer.vol2iss1pp69-76.

Texte intégral

Résumé :

The objective of this study was to investigate the effects on operator performance and satisfaction of an ergonomically designed workstation for performing a repetitive industrial assembly task. Experiments were conducted in a company with industrial workers using existing and newly developed workstations. Operator performance on the ergonomically designed workstation was 27% higher compared to the existing non-ergonomically designed workstation. Worker satisfaction score was also improved by 41% in the ergonomically designed workstation condition. The new workstation for a repetitive assembly

Styles APA, Harvard, Vancouver, ISO, etc.

7

Renaud, Lidewij, Maaike Huysmans, Hidde van der Ploeg, Erwin Speklé, and Allard van der Beek. "Long-Term Access to Sit-Stand Workstations in a Large Office Population: User Profiles Reveal Differences in Sitting Time and Perceptions." International Journal of Environmental Research and Public Health 15, no. 9 (2018): 2019. http://dx.doi.org/10.3390/ijerph15092019.

Texte intégral

Résumé :

Background: To decrease the detrimental health effects of prolonged sitting, the implementation of sit-stand workstations is a commonly used intervention for office workers. Most studies on this topic evaluated the effects of newly introduced sit-stand workstations. The objective of this study was to determine how often and how long the standing option is used and how the use of sit-stand workstations is perceived in office workers with long-term access to these workstations. Methods: Using an online survey, 1098 office employees responded to questions about frequency of usage of the sit-stand

Styles APA, Harvard, Vancouver, ISO, etc.

8

Smagowska, Bożena. "Noise at Workplaces in the Call Center." Archives of Acoustics 35, no. 2 (2010): 253–64. http://dx.doi.org/10.2478/v10168-010-0024-2.

Texte intégral

Résumé :

AbstractIn the last years the number of new forms of workplaces, such as call centers, increases. It is defined as a workstation where the basic tasks of a worker are carried out with the use of a phone and a computer. According to statistics, about 1.3-4% of workers are employed in call centers in the European countries. The noise is one of the harmful and annoying hazards of call center workstations. The paper presents the noise sources in call center rooms, assessment criteria of noise and results of noise measurements in call center workstations. The results of measurements show that the n

Styles APA, Harvard, Vancouver, ISO, etc.

9

Davis, Kermit G., and Susan E. Kotowski. "Stand Up and Move; Your Musculoskeletal Health Depends on It." Ergonomics in Design: The Quarterly of Human Factors Applications 23, no. 3 (2015): 9–13. http://dx.doi.org/10.1177/1064804615588853.

Texte intégral

Résumé :

The new trend in office ergonomics is installing dynamic workstations that include sit-to-stand tables, treadmills, stationary bicycles, and exercise balls. The question is whether it is worth the investment to try to reduce musculoskeletal pain via these dynamic workstations. Postural change is good, but the most effective workstation seems to be the sit-to-stand table with respect to reducing discomfort suffered by office workers. Treadmills and cycle workstations do have the ability to increase energy expenditure and heart rate and thus are potentially beneficial in addressing obesity that

Styles APA, Harvard, Vancouver, ISO, etc.

10

Darmawan, Vertic Eridani Budi, Sofiandi Dwi Indra, Aisyah Larasati, Cahya Nugraha, and Muhammad Fathullah. "A Postural Risk Assessment of Steamer Production Workers Using RULA and REBA." International Journal of Industrial Engineering and Engineering Management 6, no. 1 (2024): 1–11. http://dx.doi.org/10.24002/ijieem.v6i1.7322.

Texte intégral

Résumé :

The present study examined the work posture of the worker as a basis for correcting bad postures in the workplace. Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA) methods are applied to evaluate the postural risk assessment which is related to musculoskeletal disorders (MSDs). There are five workers at UD. Sidoarjo National Ship is chosen to analyze the risk posture for this study. Based on observations and calculations at UD. Sidorajo National Ship, it was found that workers were still using less than optimal methods or not supported by ergonomic workstations. The s

Styles APA, Harvard, Vancouver, ISO, etc.

11

Muharam, Machdian, and Maya Arlini Puspasari. "Designing Welding Workstations to Reduce the Risk of MSDS (Musculoskeletal Disorders)." Jurnal Indonesia Sosial Teknologi 5, no. 9 (2024): 3676–91. http://dx.doi.org/10.59141/jist.v5i9.3314.

Texte intégral

Résumé :

This study aims to design an ergonomic welding workstation to reduce the risk of Musculoskeletal Disorders (MSDs) in welding workers at PT. Sinar Bharata Perkasa. The background of this study is the high preval_ence of MSDs in welding workers due to unergonomic work posture. The methods used include posture analysis using Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA), as well as anthropometric calculations to design workstations that suit the physical condition of workers. Data collection was carried out through the Nordic Body Map (NBM) questionnaire and posture m

Styles APA, Harvard, Vancouver, ISO, etc.

12

Matos, Maria Luísa, and Ricardo Cardoso. "Evaluation of occupational exposure to flour dust and additives in a milling industry." International Journal of Occupational and Environmental Safety 8, no. 3 (2024): 18–27. http://dx.doi.org/10.24840/2184-0954_008.003_002080.

Texte intégral

Résumé :

This study aimed to assess an environmental risk in a workstation: the occupational exposure of workers to flour dust, and mixtures of flour dust with additives in the cereal milling industry. The purpose was to understand how exposure to flour dust, and mixtures of flour dust with additives affects the health of workers. In the facilities of the milling company where this study was carried out, there is an area where workers are particularly exposed to flour dust and mixtures of flour dust with additives involved. Therefore, one of the main objectives of this study was to evaluate if these wo

Styles APA, Harvard, Vancouver, ISO, etc.

13

Rosli, Nur Amira, Nor Ainy Mahyudin, Jinap Selamat, and Nor Khaizura Mahmud Ab Rashid. "Layout design for food safety improvement of frozen crispy chicken curry puff processing." Annals of the University Dunarea de Jos of Galati. Fascicle VI - Food Technology 46, no. 1 (2022): 52–66. http://dx.doi.org/10.35219/foodtechnology.2022.1.05.

Texte intégral

Résumé :

Cross movement between workstations, and inefficient material flow during the production process results in cross-contamination of food products. The purpose of this study is to develop a new layout design for a SME manufacturing frozen crispy chicken curry puff in Malaysia. Facility Sanitary Design Checklist was used in evaluating the establishment of hygiene zone, and workers and material flow. A new layout was developed using activity relationship analysis. The result revealed that hygiene zone establishment of the existing layout was 38.5%. The worker and material flows were poorly control

Styles APA, Harvard, Vancouver, ISO, etc.

14

Setyaningsih, Yuliani, Ekawati Ekawati, and Ida Wahyuni. "Efforts to Control Work Environment Hazards Based on 5S Principles for Smoked Fish Workers." BIO Web of Conferences 54 (2022): 00006. http://dx.doi.org/10.1051/bioconf/20225400006.

Texte intégral

Résumé :

Workstation design can be a potential hazard for workers. A workstation that is arranged following the 5S principles will prevent the exposure of potential work environment hazards such as improper work position that can affect the health of the workers. This research aimed to describe the condition of work station and create a new design a workstation according to 5S principles. This research was quantitative research with cross sectional approach. Samples were taken purposively from 141 smoked fish workers The data on the respondents’ characteristics and potential hazards were analyzed using

Styles APA, Harvard, Vancouver, ISO, etc.

15

Vallone, M., A. Naddeo, N. Cappetti, and R. Califano. "Comfort Driven Redesign Methods: An Application to Mattresses Production Systems." Open Mechanical Engineering Journal 9, no. 1 (2015): 492–507. http://dx.doi.org/10.2174/1874155x01509010492.

Texte intégral

Résumé :

The definitions of methods and tools used to evaluate how workers perceive the comfort during their activities remains an “open” problem at this time. Many researchers have dealt with that problem in the last twenty years, focusing their efforts primarily on the automotive sector and on VDT workstation comfort. This paper analyzes how workers position themselves at workstations used in industrial processes that sew together the edges of mattresses. The aim of the analysis is to determine whether workers can position themselves in ways that allow them to carry out activities in simple and econo

Styles APA, Harvard, Vancouver, ISO, etc.

16

Lin, Jia-Hua, Carisa Harris-Adamson, Stephen Bao, et al. "Alternative Workstations: Magic Pills for Office Worker Health?" Proceedings of the Human Factors and Ergonomics Society Annual Meeting 61, no. 1 (2017): 460–64. http://dx.doi.org/10.1177/1541931213601595.

Texte intégral

Résumé :

Routine office or computer work are of public health concerns due to their sedentary nature. Sit- stand desks may be prescribed for employees based on medical or ergonomic factors. Sit-stand or active workstations, either assigned to individual workers or made available in “unassigned” office areas are also making inroads into the workplace with the goal of reducing sedentary work, varying (alternating) work postures, improving productivity, or accommodating workers with musculoskeletal symptoms. This diverse panel will present recent research and practice findings and invite audience particip

Styles APA, Harvard, Vancouver, ISO, etc.

17

Yilmaz, Ö. F., Ö. F. Demirel, S. Zaim, and S. Sevim. "Assembly line balancing by using axiomatic design principles: An application from cooler manufacturing industry." International Journal of Production Management and Engineering 8, no. 1 (2020): 31. http://dx.doi.org/10.4995/ijpme.2020.11953.

Texte intégral

Résumé :

<p>The philosophy of production without waste is the fundamental belief behind lean manufacturing that should be adopted by enterprises. One of the waste elimination methods is assembly line balancing for lean manufacturing, i.e. Yamazumi. The assembly line balancing is to assign tasks to the workstations by minimizing the number of workstations to the required values. There should be no workstation with the excessively high or low workload, and all workstations must ideally work with balanced workloads. Accordingly, in this study, the axiomatic design method is applied for assembly line

Styles APA, Harvard, Vancouver, ISO, etc.

18

Bouchard, Danielle R., Shaelyn Strachan, Leslie Johnson, et al. "Using Shared Treadmill Workstations to Promote Less Time Spent in Daily Low Intensity Physical Activities: A Pilot Study." Journal of Physical Activity and Health 13, no. 1 (2016): 111–18. http://dx.doi.org/10.1123/jpah.2014-0451.

Texte intégral

Résumé :

Objective:Our objective was to test the feasibility of sharing treadmill workstations among office workers to reduce time spent at low intensity and explore changes in health outcomes after a 3-month intervention.Methods:Twenty-two office workers were asked to walk 2 hours per shift on a shared treadmill workstation for 3 months. Physical activity levels (ie, low, light, moderate, and vigorous), health-related measures (eg, sleep, blood pressure), treadmill usage information, and questions regarding participants’ expectation and experiences were collected.Results:Physical activity time at low

Styles APA, Harvard, Vancouver, ISO, etc.

19

Anghel, Daniel-Constantin, Eduard-Laurențiu Niţu, Alin-Daniel Rizea, Alin Gavriluţă, Ana Gavriluţă, and Nadia Belu. "Ergonomics study on an assembly line used in the automotive industry." MATEC Web of Conferences 290 (2019): 12001. http://dx.doi.org/10.1051/matecconf/201929012001.

Texte intégral

Résumé :

Today, for the enterprises, the competition is more and more intense and more competitor try to satisfy their customers. In the field of automotive industry, the demands for the product increase and the company need to satisfy the demand. As the demands increases, the company should produce more product than usual. In the same time the comfort and health of the workers should be consider. Some factors such as workstation design should take into consideration in order to increase the productivity and at the same time protect workers from accidents and health problem. Therefore, the workstations

Styles APA, Harvard, Vancouver, ISO, etc.

20

Renaud, Lidewij R., Maaike A. Huysmans, Hidde P. van der Ploeg, Erwin M. Speklé, and Allard J. van der Beek. "Natural Patterns of Sitting, Standing and Stepping During and Outside Work—Differences between Habitual Users and Non-Users of Sit–Stand Workstations." International Journal of Environmental Research and Public Health 17, no. 11 (2020): 4075. http://dx.doi.org/10.3390/ijerph17114075.

Texte intégral

Résumé :

Sit–stand workstations have shown to reduce sitting time in office workers on a group level. However, movement behaviour patterns might differ between subgroups of workers. Therefore, the objective of this study was to examine sitting, standing and stepping outcomes between habitual users and non-users of sit–stand workstations. From an international office population based in the Netherlands, 24 users and 25 non-users of sit–stand workstations were included (all had long-term access to these workstations). Using the ActivPAL, sitting, standing and stepping were objectively measured during and

Styles APA, Harvard, Vancouver, ISO, etc.

21

Pentikis, John, Mary S. Lopez, and Robert E. Thomas. "Ergonomics evaluation of a government office building." WORK: A Journal of Prevention, Assessment & Rehabilitation 18, no. 2 (2002): 123–31. https://doi.org/10.3233/wor-2002-00209.

Texte intégral

Résumé :

An ergonomics team from the US Army Center for Health Promotion and Preventive medicine evaluated 465 video display terminal (VDT) workstations in a Government office building over an 18-day period. Each workstation evaluation involved an assessment of the worker, the chair, the desk, the keyboard, the pointing device, the monitor, and the office environmental conditions. The team also collected worker pain and injury information. The problems seen during the evaluation were characteristic of most office environments where VDT workstation furniture was purchased before the advent of mouse-driv

Styles APA, Harvard, Vancouver, ISO, etc.

22

Pratiwi, Indah, and Astrid Winahyu Pertiwi. "EVALUATION OF WORK POSTURE USING THE CTD RISK INDEX METHOD TO REDUCE THE RISK OF MUSCLE INJURY IN THE BATIK CAP INDUSTRY." Jurnal Ilmiah Teknik Industri 11, no. 3 (2024): 231–39. http://dx.doi.org/10.24912/jitiuntar.v11i3.26696.

Texte intégral

Résumé :

Making stamped batik goes through 5 stages, namely tasting, dyeing color, removing hot and cold tubs, and drying. This process takes place repeatedly for a long time, causing workers to potentially experience musculoskeletal complaints and the risk of Cumulative Trauma Disorders (CTDs). The purpose of this study was to determine whether batik Nilo Tirto workers were at risk for developing CTDs or not. This research was conducted by using a method to determine the level of worker complaints with a Nordic Body Map (NBM) questionnaire. After knowing each class of worker complaints, the CTDs Risk

Styles APA, Harvard, Vancouver, ISO, etc.

23

Chaiklieng, Sunisa. "O-405 OCCUPATIONAL HEALTH RISK ASSESSMENT ON BACK PAIN AND ITS ASSOCIATED RISK FACTORS AMONG INDUSTRIAL ELECTRONIC WORKERS." Occupational Medicine 74, Supplement_1 (2024): 0. http://dx.doi.org/10.1093/occmed/kqae023.1436.

Texte intégral

Résumé :

Abstract Introduction Persistent back pain is common among industrial workers whose work involves materials handling and repetitive work. Some electronic workers perform sedentary and eye focusing work which might increase health risk. This cross-sectional study aimed to assess the occupational health risk and identify the risk factors correlated with back pain among electronic workers. Methods Data were collected on 354 workers with musculoskeletal disorders through a severity and frequency questionnaire (MSFQ), upper limb assessment of ergonomic risk and the measurement of lighting intensity

Styles APA, Harvard, Vancouver, ISO, etc.

24

Gattamelata, Davide, and Mario Fargnoli. "Development of a New Procedure for Evaluating Working Postures: An Application in a Manufacturing Company." International Journal of Environmental Research and Public Health 19, no. 22 (2022): 15423. http://dx.doi.org/10.3390/ijerph192215423.

Texte intégral

Résumé :

Musculoskeletal diseases represent a constant phenomenon in occupational health and safety (OHS) despite the large effort at governmental and technical levels. In the industrial context, numerous studies have dealt with the evaluation of the physical demand of workers. Moreover, numerous studies have investigated the problem, providing tools for ergonomics analysis. However, practical approaches aimed at integrating ergonomics issues in risk assessment activities are still scarce. To reduce such a gap, the current study proposes a procedure for the evaluation of the static working postures of

Styles APA, Harvard, Vancouver, ISO, etc.

25

Yilmaz, Hamid, and Mustafa Yilmaz. "Multi-manned assembly line balancing problem with balanced load density." Assembly Automation 35, no. 1 (2015): 137–42. http://dx.doi.org/10.1108/aa-05-2014-041.

Texte intégral

Résumé :

Purpose – The purpose of this paper is balancing multi-manned assembly lines with load-balancing constraints in addition to conventional ones Most research works about the multi-manned assembly line balancing problems are focused on the conventional industrial measures that minimize total number of workers, number of multi-manned workstations or both. Design/methodology/approach – This paper provides a remedial constraint for the model to balance task load density for each worker in workstations. Findings – Comparisons between the proposed mathematical model and the existing multi-manned mathe

Styles APA, Harvard, Vancouver, ISO, etc.

26

Pisa, Miguel P. de la, Jose C. Molina, and Ignacio Eguía. "Ant colony algorithms for minimizing costs in multi-mode resource constrained project scheduling problems with spatial constraints." International Journal of Industrial Engineering Computations 15, no. 3 (2024): 667–84. http://dx.doi.org/10.5267/j.ijiec.2024.5.002.

Texte intégral

Résumé :

This paper addresses the problem of activity scheduling and operator assignment in workstations of aerospace assembly lines. The problem is modelled as a new variant of the Multi-Mode Resource Constrained Project Scheduling Problem (MRCPSP), which incorporates practical features from aerospace workstations in assembly lines. These workstations have a substantial number of activities to be scheduled within a given assembly cycle time. It introduces particularities which are not usually addressed such as considering additional workers for performing activities, different workers’ proficiency, an

Styles APA, Harvard, Vancouver, ISO, etc.

27

Sianipar, Joshua Tito Partogi, Yuli Dewi Astanti, and Intan Berlianty. "Simulasi Perbaikan Tata Letak Fasilitas Produksi Untuk Meminimalisir Jarak Perpindahan di Industri Katering Nara Kitchen." Jurnal Informasi, Sains dan Teknologi 7, no. 1 (2024): 145–60. http://dx.doi.org/10.55606/isaintek.v7i1.211.

Texte intégral

Résumé :

Nara Kitchen is a daily catering service provider with a varied menu every day. Since the Covid-19 pandemic, catering demand has increased to 130 portions per delivery. This surge in demand necessitates improvements to the layout of production facilities, as higher production volume results in increased activity between workstations. Consequently, Nara Kitchen aims to enhance the layout of its facilities to optimize production efficiency. Facility layout improvements are implemented using the Blocplan method and are simulated through a discrete systems approach. The Blocplan method designs the

Styles APA, Harvard, Vancouver, ISO, etc.

28

Jadhav, Ganesh Suresh, M. Arunachalam, and Urmi Ravindra Salve. "Ergonomics and efficient workplace design for hand-sewn footwear artisans in Kolhapur, India." Work 66, no. 4 (2020): 849–60. http://dx.doi.org/10.3233/wor-203230.

Texte intégral

Résumé :

BACKGROUND: The footwear manufacturing industry is one of the significant sectors of leather businesses in India. In the Indian footwear production industry, there is an enormous potential for employment, export, and development. Kolhapuri footwear is a popular handmade craft in India. It is a well-designed craft used by Indian people for many years. Artisans using traditional tools manufacture this footwear manually. Workers of this craft use traditional methods and work in cottage-based enterprises where organized laws and legislations are not applicable. Therefore, any occupational hazard-r

Styles APA, Harvard, Vancouver, ISO, etc.

29

Hidayat, Amri, Mahmud Achmad, and Munira. "THE ANALYSIS OF PRODUCTION CAPACITY USING ROUGH CUT CAPACITY PLANNING METHOD (CASE STUDY AT PT. UNTUK INDONESIA HIJAU)." Jurnal Agrisistem: Seri Sosek dan Penyuluhan 21, no. 1 (2025): 56–67. https://doi.org/10.52625/j-agr-sosekpenyuluhan.v21i1.457.

Texte intégral

Résumé :

PT. Untuk Indonesia Hijau is a small-scale company based in Indonesia, specializing in the processing of cocoa beans to produce fermented cocoa beans, cocoa mass, and chocolate bars. Currently, the company's production process is driven by customer demand, often neglecting the efficient utilization of available facilities and resources, resulting in escalated operational costs. The existing workstations exhibit underutilized resources while certain machines and workers are overloaded in specific conditions. The objective of this study is to thoroughly evaluate and analysis the production capac

Styles APA, Harvard, Vancouver, ISO, etc.

30

Azizy, Annisa Rahmi, Rusindiyanto, and Rizqi Novita Sari. "Workload Analysis Using the Full-Time Equivalent and Rating Scale Mental Effort Methods in the Production Division." Journal La Multiapp 5, no. 1 (2024): 57–67. http://dx.doi.org/10.37899/journallamultiapp.v5i1.1587.

Texte intégral

Résumé :

CV Aurexell is an industry engaged in the food sector, namely bread. In the production process, several problems cause physical and mental workloads, where employees at dough-making, weighing, and molding workstations feel physically burdened because they have to work standing up for a day and mentally burdened because they have to meet production targets every day but there is a shortage of employees at the fermentation and baking, also cream filling workstations. To solve these problems, we must take workload measurements to find the optimal number of employees. Based on data processing usin

Styles APA, Harvard, Vancouver, ISO, etc.

31

Boge, Knut, Alenka Temeljorov Salaj, Ida Bakken, Magnus Granli, and Silje Mandrup. "Knowledge workers deserve differentiated offices and workplace facilities." Facilities 37, no. 1/2 (2019): 38–60. http://dx.doi.org/10.1108/f-01-2018-0002.

Texte intégral

Résumé :

PurposeThe purpose of this paper is to investigate factors that influence effective workplace designs for knowledge workers.Design/methodology/approachDuring spring 2016, the employees in a large institution for research and higher education, a large consultancy company and a medium-sized consultancy company (in total 4367 employees) in Norway received invitations to participate in an anonymous online survey about workplaces and facilities. In all, 1,670 employees answered the survey (38.2 per cent response rate). The data have been analyzed with IBM SPSS version 23, among others through use o

Styles APA, Harvard, Vancouver, ISO, etc.

32

Veisi, Hemmat, Alireza Choobineh, Haleh Ghaem, Mehdi Faraji Kujerdi, Ramin Barazandeh, and Himan Barazandeh. "Upper extremity musculoskeletal symptoms among Iranian hand-woven shoe workers." Work 67, no. 1 (2020): 129–39. http://dx.doi.org/10.3233/wor-203258.

Texte intégral

Résumé :

BACKGROUND: Studies have demonstrated that upper extremity musculoskeletal disorders (UEMSDs) are highly prevalent among weavers. In Iran, little information is available regarding the prevalence of MSDs and their causal risk factors among hand-woven shoe workers. This cross-sectional study aimed to determine the prevalence of UEMSDs and to identify risk factors associated with UEMSDs symptoms among 586 Iranian hand-woven shoe workers. METHODS: The data were collected using the Nordic Musculoskeletal Questionnaire and by direct observation of working postures via the Rapid Upper Limb Assessmen

Styles APA, Harvard, Vancouver, ISO, etc.

33

Sahito, W. S., R. W. Bazuhair, and H. Mimesh. "Workstation Evaluation Regarding Ergonomic Awareness and Work-Related Musculoskeletal Disorders Among Coal Mine Workers." Engineering, Technology & Applied Science Research 12, no. 2 (2022): 8284–88. http://dx.doi.org/10.48084/etasr.4668.

Texte intégral

Résumé :

Mining is often associated with the risk of Work-Related Musculoskeletal Disorders (WRMSDs). Despite being a coal-rich country, Pakistan’s mining sector stays behind in terms of occupational health and safety. Only a few research studies have been conducted on ergonomics in the mining industry. The current study aimed at evaluating workstations for WRMSDs and ergonomic factors among coal mine workers. Survey data were gathered from a total of 103 workers using a structured questionnaire. Information on the incidence of musculoskeletal disorders was obtained using the Standardized Nordic Questi

Styles APA, Harvard, Vancouver, ISO, etc.

34

Pratiwi, Indah, and Isnainiyah Wardatul Jannah. "Redesign of workstations to minimize musculoskeletal disorders for guitar workers in Indonesia." OPSI 17, no. 1 (2024): 81. http://dx.doi.org/10.31315/opsi.v17i1.10837.

Texte intégral

Résumé :

This study aims to determine and analyze body parts that experience musculoskeletal disorders (MSDs) and muscles that experience fatigue in guitar-making workers. The method used is the Nordic Body Map (NBM) to determine MSDs complaints, including complaints of pain in 28 parts of the worker's body, and the Muscle Fatigue Analysis (MFA) method to determine muscle fatigue that occurs in each part of the body by determining the level of effort, duration of work, and frequency of work movements. The results of research using NBM were 2 workers with high risk, 3 workers with medium risk, and 7 wor

Styles APA, Harvard, Vancouver, ISO, etc.

35

Park, Jinhyung, Kwangwon Choi, Abu Talib, and Jaewan Joe. "Investigation of Energy Consumption of Office Spaces with Active Workstations." Energies 17, no. 3 (2024): 660. http://dx.doi.org/10.3390/en17030660.

Texte intégral

Résumé :

This study investigates the impact of an active workstation on heating and cooling energy consumption in commercial buildings. The improved performance and health of office workers are well-known and supported by several surveys and studies. However, the preferred and revised indoor air temperature for different activities of the employees, such as standing and walking, directly impacts the energy consumption of the building. Therefore, this study systematically quantifies the impact of indoor environments on building energy consumption using a simulation tool. Based on literature reviews with

Styles APA, Harvard, Vancouver, ISO, etc.

36

Ismail, Ahmad, Kumar Karagaratnan, and Kumaran Kadirgama. "Thermal comfort findings: Scenario at Malaysian automotive industry." Thermal Science 17, no. 2 (2013): 387–96. http://dx.doi.org/10.2298/tsci111111015i.

Texte intégral

Résumé :

This paper discusses the findings of thermal comfort assessment at Malaysian automotive industry. Nine critical workstations were chosen as subjects for the study in order to determine the thermal comfort among workers at Malaysian automotive industry. The human subjects for the study comprises of the operators from tire receiving, dashboard assembly, drum tester, body assembly, seat assembly, door check assembly, stamping workstation, engine sub assembly and paint shop of the factory. The environmental factors such as Wet Bulb Globe Temperature (WBGT), relative humidity, air velocity, illumin

Styles APA, Harvard, Vancouver, ISO, etc.

37

Marhaendra, Tjokorda Bagus Putra, Yeyen Komalasari, Eka Putri Suryantari, and Ni Putu Dyah Krismawintari. "Strategy to Applied Ergonomics on MSMEs during Pandemic Covid-19." International Journal of Social Science Research and Review 5, no. 11 (2022): 1–13. http://dx.doi.org/10.47814/ijssrr.v6i10.583.

Texte intégral

Résumé :

Pandemic COVID-19 hard impact on the people’s economy, especially the tourism industry in Bali. Many businesses close, and workers lost their jobs. And started businesses independently, as Micro, Small, and Medium Enterprises (MSMEs). However, with less basic business knowledge, it is vulnerable to the risk of surviving its business. Therefore, to cope with these conditions, they need the support of strategic human resources, business strategy, and attainability with ergonomics principles. Ergonomics is the method that is used to harmonize workers with their work tools, workstations, workplace

Styles APA, Harvard, Vancouver, ISO, etc.

38

V. G Arude, S. K. Shukla, and T. S. Manojkumar. "Evaluation of Worker Exposure to Airborne Dust in Cotton Ginneries." Journal of Agricultural Engineering (India) 44, no. 3 (2007): 30–32. http://dx.doi.org/10.52151/jae2007443.1278.

Texte intégral

Résumé :

Airborne dust in cotton ginneries is a nuisance as well as a potential respiratory hazard. The workers in ginneries are subjected to vagaries of airborne dust pollution. Exposure to dust causes cough, cold, fever, breathing difficulties and may even lead to lung disorders if exposed for long term. Dust concentration in mg! m3 of PM 2.5 11m and PM 10 11m was measured at different workstations. Time weighed average (TWA) of airborne dust of PM 2.5 and PM10 was found up to 2.30 and 3.75 mg/m3 respectively in conventional ginneries. In automatic ginneries, workers are exposed to TWA of airborne du

Styles APA, Harvard, Vancouver, ISO, etc.

39

El Kadri Filho, Fauzi, and Sérgio Roberto de Lucca. "Telework during the COVID-19 pandemic: Ergonomic and psychosocial risks among Brazilian labor justice workers." Work 71, no. 2 (2022): 395–405. http://dx.doi.org/10.3233/wor-210490.

Texte intégral

Résumé :

BACKGROUND: The imposition of telework by the COVID-19 pandemic represented a challenge for companies and workers with regard to the management and organization of the workplace at home. OBJECTIVES: To evaluate the ergonomic risks, psychosocial factors and musculoskeletal symptoms as well as the relationships between these variables in employees of a Brazilian labor judiciary unit. METHODS: A cross-sectional study was carried out with 55 employees who had their workstations evaluated by means of the Rapid Office Strain Assessment (ROSA-Br) and answered a questionnaire of sociodemographic and o

Styles APA, Harvard, Vancouver, ISO, etc.

40

Hedge, Alan, and William A. Erickson. "Office Environment Syndrome Study: Part II." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 42, no. 8 (1998): 639–42. http://dx.doi.org/10.1177/154193129804200804.

Texte intégral

Résumé :

A longitudinal self-report diary study of SBS cases and controls identified from buildingwide surveys of 4 office buildings is described. Self-report diaries were distributed to a total of 214 workers in the 4 buildings, and complete returns were obtained for 123 workers (57% return rate). Climate conditions (CO, CO2, formaldehyde, respirable dust mass (PM3.5) and particulate counts (0.3 μm, 0.5 μm, 1 μm, 5 μm), settled dust, air temperature, %RH, illuminance) were measured at each workstation. Ergonomic factors (observed work posture, office type, desk paper coverage, desk clutter, computer,

Styles APA, Harvard, Vancouver, ISO, etc.

41

Akuma, Hellstrome Young, and Nazlin Hanie Abdullah. "Innovative Ergonomic Solutions: Integrating 3D-CAD, Virtual Reality, and Mixed Methods for Railway Maintenance Workers." Journal of Industrial Engineering and Halal Industries 6, no. 1 (2025): 21–33. https://doi.org/10.14421/jiehis.4978.

Texte intégral

Résumé :

Physical ergonomics is critical in safeguarding worker safety and well-being, particularly in demanding work environments such as maintenance tasks involving complex engineering systems (CES). The ergonomics field is evolving with new technological tools, offering innovative approaches to enhance current assessment protocols. This study proposes a conceptual framework integrating advanced technological tools, specifically, Three-Dimensional Computer-Aided Design (3D-CAD) and Virtual Reality (VR), with conventional mixed methods approaches to optimize ergonomic solutions for railway maintenance

Styles APA, Harvard, Vancouver, ISO, etc.

42

Rofieq, Mochammad. "Ergonomic workstations for handicraft product made from fluorescent lamp waste." MATEC Web of Conferences 204 (2018): 03001. http://dx.doi.org/10.1051/matecconf/201820403001.

Texte intégral

Résumé :

One of Micro and Small Enterprises (MSEs) which engages in the field of handicraft in Randuagung Singosari Malang produces various kind of souvenirs, such as twist glass, bell, fruit shaped glass, and wedding souvenirs. All of which are made from fluorescent lamp waste. The waste utilization has become a solution to the overflowing fluorescent waste from factories around the region. As the main factor in determining productivity, workstation is not yet getting serious attention. Workers use short seats when performing work on the handicraft. The tools they use are in lower setting, making them

Styles APA, Harvard, Vancouver, ISO, etc.

43

Amri, Amri, Cut Ita Erliana, and Nurjannah Nurjannah. "Mapping and Analysis of the Effect of Noise on Auditory and Non-Auditory Disorders Among Workers at the PMKS Produc-tion Station of PT. Sisirau." International Journal of Engineering, Science and Information Technology 5, no. 4 (2025): 75–84. https://doi.org/10.52088/ijesty.v5i4.991.

Texte intégral

Résumé :

PT. Sisirau Palm Oil Mill Company is engaged in the production of crude palm oil (CPO) and kernel. In its production processes, the company continuously operates heavy machinery around the clock. These machines generate high noise levels, potentially causing both auditory (hearing-related) and non?auditory (communication, physiological, psychological, and work?productivity) disturbances among workers. This study aims to map the noise levels and analyse their impact on auditory and non?auditory disorders among workers at the production workstations of PT. Sisirau’s palm oil mill. Measurements w

Styles APA, Harvard, Vancouver, ISO, etc.

44

Huysmans, Maaike A., Hidde P. van der Ploeg, Karin I. Proper, Erwin M. Speklé, and Allard J. van der Beek. "Is Sitting Too Much Bad for Your Health?" Ergonomics in Design: The Quarterly of Human Factors Applications 23, no. 3 (2015): 4–8. http://dx.doi.org/10.1177/1064804615585410.

Texte intégral

Résumé :

Office workers spend a large part of their workday sitting down. Too much sitting seems bad for people’s health and puts them at risk for premature death. Workstation alternatives that allow desk work to be done while standing, walking, biking, or stepping reduce the total time spent sitting without affecting work performance much. Moreover, these alternatives seem acceptable to users. Future research is needed to determine long-term effects and whether results apply to different working populations. Ergonomists play an important role in developing recommendations for the setup and use of alte

Styles APA, Harvard, Vancouver, ISO, etc.

45

Colim, Ana, Carlos Faria, Ana Cristina Braga, et al. "Towards an Ergonomic Assessment Framework for Industrial Assembly Workstations—A Case Study." Applied Sciences 10, no. 9 (2020): 3048. http://dx.doi.org/10.3390/app10093048.

Texte intégral

Résumé :

Work-related musculoskeletal disorders (WMSD) are one of the main occupational health problems. The best strategy to prevent them lies on ergonomic interventions. The variety of industrial processes and environments, however, makes it difficult to define an all-purpose framework to guide these ergonomic interventions. This undefinition is exacerbated by recurrent introduction of new technologies, e.g., collaborative robots. In this paper, we propose a framework to guide ergonomics and human factors practitioners through all stages of assessment and redesign of workstations. This framework was

Styles APA, Harvard, Vancouver, ISO, etc.

46

Pizatella, Timothy J., and Michael B. Moll. "Simulation of the After-Reach Hazard on Dual Palm Button Workstations." Proceedings of the Human Factors Society Annual Meeting 29, no. 8 (1985): 824–28. http://dx.doi.org/10.1177/154193128502900823.

Texte intégral

Résumé :

This paper describes a study of the after-reach hazard using a power press simulator. The after-reach hazard occurs when a worker reaches into the point of operation on a power press after initiating the downstroke of the press ram. The hand reaching capabilities of industrial power press operators were measured to quantify hand reach speed and to determine variables which may affect after-reach movement times. The results of this study identified three variables which may be important in characterizing a worker's ability to make rapid hand reach movements: age, gender, and the location of the

Styles APA, Harvard, Vancouver, ISO, etc.

47

Cut Ita Erliana, Subhan A. Gani, Amri, and Faisal Akbar. "The workload analysis for the mackarel cracker industry's workers uses the full-time equivalents method." TEKNOSAINS : Jurnal Sains, Teknologi dan Informatika 12, no. 1 (2025): 40–45. https://doi.org/10.37373/tekno.v12i1.1236.

Texte intégral

Résumé :

Kerupuk Ikan Tenggiri Cap Kuda Laut is one of the fish-based cracker industries. The industry is located at Pangkalan Brandan, North Sumatra, Indonesia. The fish-based cracker industry employs 15 workers and six workstations, which include fish processing stations, fish grinding stations, kneading stations, printing stations, frying stations and packing stations. According to the observations, there is an unequal division of worker, which can result in an inappropriate workload for the worker. This study aims to analyze workers' workloads as a basis for determining the optimal number of worker

Styles APA, Harvard, Vancouver, ISO, etc.

48

Pratiwi, Indah, and Isnainiyah Wardatul Jannah. "Redesign of workstations guitar product to minimize musculoskeletal disorders for workers." Operations Excellence: Journal of Applied Industrial Engineering 16, no. 2 (2024): 216. http://dx.doi.org/10.22441/oe.2024.v16.i2.108.

Texte intégral

Résumé :

The production process of acoustic guitars in Indonesia involves 4 workstations and 17 distinct activities. Due to the nature of the work—8-hour shifts in seated positions with frequent bending, squatting, and repetitive movements—workers are at risk of musculoskeletal disorders (MSDs), particularly in the neck, shoulders, back, arms, and wrists. This study aimed to identify and analyze body posture conditions using the Nordic Body Map (NBM) and Muscle Fatigue Analysis (MFA) methods. The NBM method was used to record pain complaints across various body parts, while the MFA assessed muscle fati

Styles APA, Harvard, Vancouver, ISO, etc.

49

Castilla, Delfa G., Jastine Rose C. Butanas, Dexter E. Dimco, Maribel A. Granada, Therese Nima D. Molina, and Julie Faith Pepito. "Assessment of the Physical Ergonomic Factors of Pearl Drillers in Medellin, Cebu." International Journal of Recent Advances in Multidisciplinary Topics 5, no. 1 (2024): 15–20. https://doi.org/10.5281/zenodo.10522391.

Texte intégral

Résumé :

The primary objective of this study was to assess the satisfaction levels of pearl drillers with regard to seven physical ergonomic factors. The study used a descriptive qualitative design. Data was gathered through self-administered survey questionnaires, wherein the 14 respondents were required to select one answer out of five options per factor. Based on the findings, the lighting conditions, posture and seating arrangements are reported to have good conditions. Similarly, the ergonomic features of tools and equipment of the workers are adequate, with room for improvement. The noise level i

Styles APA, Harvard, Vancouver, ISO, etc.

50

Marín, Javier, and José J. Marín. "Forces: A Motion Capture-Based Ergonomic Method for the Today’s World." Sensors 21, no. 15 (2021): 5139. http://dx.doi.org/10.3390/s21155139.

Texte intégral

Résumé :

Approximately three of every five workers are affected by musculoskeletal disorders, especially in production environments. In this regard, workstation ergonomic evaluations are especially beneficial for conducting preventive actions. Nevertheless, today’s context demonstrates that traditional ergonomic methods should lead to smart ergonomic methods. This document introduces the Forces ergonomic method, designed considering the possibilities of inertial motion capture technology and its applicability to evaluating actual workstations. This method calculates the joint risks for each posture and

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!