Accedi

Bibliografie tematiche / Adhesive joints / Tesi

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Adhesive joints.

Tesi sul tema "Adhesive joints"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 25 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Adhesive joints".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.

1

Kon, Haruhiko. "Characterization of adhesively bonded joints using bulk adhesive properties." Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-01242009-063346/.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Su, Ning. "Durability and fatique performance of structural adhesives and adhesive joints." Thesis, University of Dundee, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240601.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Kawashita, Luiz Fernando. "The peeling of adhesive joints." Thesis, Imperial College London, 2006. http://hdl.handle.net/10044/1/7720.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Korenberg, Capucine Florence. "The durability of adhesive joints." Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.272387.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Hutchinson, Allan Robert. "Durability of structural adhesive joints." Thesis, University of Dundee, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245438.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Feih, Stefanie. "Design of composite adhesive joints." Thesis, University of Cambridge, 2002. https://www.repository.cam.ac.uk/handle/1810/284008.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Bland, David Jonathan. "The durability of adhesive joints." Thesis, Imperial College London, 2009. http://hdl.handle.net/10044/1/5687.

Testo completo

Abstract (sommario):

One of the most important requirements of an adhesive joint is the ability to retain a significant proportion of its load-bearing capability for the long periods under the wide variety of environmental conditions encountered during its service-life. There exists a need to improve the understanding of the mechanics and mechanisms associated with the durability of adhesive joints in hostile environments, such as one of the most potentially damaging and frequently encountered, water, to further their future extensive use in engineering applications. In the present research, four important aspects

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Little, Matthew S. G. "The durability of structural adhesive joints." Thesis, Imperial College London, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.417769.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Sanchez, Francisco Sebastian Rodriguez. "Fracture Behaviour of Automotive Adhesive Joints." Thesis, Imperial College London, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.485405.

Testo completo

Abstract (sommario):

Adhesives can enable significant weight reductions in automotive constructions. However, the performance of adhesive joints and the energy absorption of bonded structures needs to be well understood. This thesis describes the perfonnance of a number of automotive adhesive joints using a fracture mechanics approach. The fracture energy, Gc ' was used to characterise the joint perfonnance during different modes of loading at low and high r,ates. A detailed analysis strategy was developed to account for the different types of crack propagatidn observed and the high rate effects encountered. This

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Bigwood, David Andrew. "The design of structural adhesive joints." Thesis, University of Surrey, 1990. http://epubs.surrey.ac.uk/770397/.

Testo completo

Abstract (sommario):

This thesis details the work carried out under two research projects at the University of Surrey. The first project titled The Design of Structural Adhesive Joints', was of three years duration from September 1985 to August 1988 and was sponsored by the Science and Engineering Research Council. The second project, sponsored by Ford UK Ltd, and tided 'A General Joint Analysis Facility extended certain aspects of the analysis work initiated In the first period of research. The objective of the work was to address the problem of integrating structural adhesives Into the design process and to prov

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Nagda, Vinit Jethalal. "Virtual Material Testing of Adhesive Joints." Thesis, KTH, Hållfasthetslära, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-284467.

Testo completo

Abstract (sommario):

The automotive industry has shown an increasing interest in adhesive bonding for mixed-material joining. Modern design methods are critically dependent on accurate material models and data for numerical methods to enable the simulation of a design prototype early in the design process. This study proposes a numerical modelling approach to simulate the deformation and failure in adhesive joints subjected to different loading states. The model incorporates the smeared crack method that combines plasticity and damage theories. Linear Drucker-Prager plasticity is coupled with damage formulation fo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Yu, Yang. "Investigation of stresses in adhesive joints." Thesis, Loughborough University, 2005. https://dspace.lboro.ac.uk/2134/35071.

Testo completo

Abstract (sommario):

Adhesive joints are widely used as a structural element in automotive and in aerospace applications because of their main advantage of more uniform stress distributions within lap joints relative to conventional bonding for example riveting or bolting. Adhesives can produce a stronger joint and potentially lengthen its service life. However, the stress distribution in the joint is not uniform and stresses are concentrated at the edges of the overlap. This can cause fatigue and reduce the service life of the joint. Therefore, a large number of analytical and numerical studies have been carried

Gli stili APA, Harvard, Vancouver, ISO e altri

13

關健明 and Kin-ming Kwan. "An expert system for adhesive-bonded joints." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1995. http://hub.hku.hk/bib/B31212347.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Kwan, Kin-ming. "An expert system for adhesive-bonded joints /." Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038651.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Zavatta, Nicola. "Influence of adhesive thickness on adhesively bonded joints under fatigue loading." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2015. http://amslaurea.unibo.it/9713/.

Testo completo

Abstract (sommario):

Research on adhesive joints is arousing increasing interest in aerospace industry. Incomplete knowledge of fatigue in adhesively bonded joints is a major obstacle to their application. The prediction of the disbonding growth is yet an open question. This thesis researches the influence of the adhesive thickness on fatigue disbond growth. Experimental testing on specimens with different thickness has been performed. Both a conventional approach based on the strain energy release rate and an approach based on cyclic strain energy are provided. The inadequacy of the former approach is discuss

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Butkus, Lawrence M. "Environmental durability of adhesively bonded joints." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/19008.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Xu, Botao. "Fracture mechanisms and failure criteria of adhesive joints and toughened epoxy adhesives." Thesis, Queen Mary, University of London, 2010. http://qmro.qmul.ac.uk/xmlui/handle/123456789/371.

Testo completo

Abstract (sommario):

Adhesive bonded applications are used widely in industry because of significant advantages such as uniform stress distribution, and the ability to join different materials. However most epoxy structural adhesives are brittle at room temperature and it is required to improve their toughness. The objective of this work was to understand the fracture of adhesive joints, failure criteria and rubber toughening mechanisms via a series of experiments and FEA modelling. Double lap joints (DLJ) bonded by commercial AV119 adhesive were studied. It was found that local strain and failure path were contro

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Siu, Frederick Y. K. "Studies of microwaves applications for adhesive, weld joint and NDT technique." Swinburne Research Bank, 2007. http://hdl.handle.net/1959.3/36854.

Testo completo

Abstract (sommario):

Thesis (MEng) - Swinburne University of Technology, Industrial Research Institute Swinburne - 2007.<br>A thesis submitted for fulfillment of the requirement for the degree of Master of Engineering, Industrial Research Institute, Swinburne University of Technology - 2007. Typescript. Includes bibliographical references (p. 168-193).

Gli stili APA, Harvard, Vancouver, ISO e altri

19

Mubashar, Aamir. "Modelling degradation in adhesive joints subjected to fluctuating service conditions." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6336.

Testo completo

Abstract (sommario):

Adhesive joining is an attractive alternative to conventional joining methods, such as welding and mechanical fastening. The benefits of adhesive bonding include: the ability to form lightweight, high stiffness structures; joining of different types of materials; better fatigue performance, and reduction in the stress concentrations or the effects of the heat associated with welding. However, concerns about the durability of adhesive joints still hinder their widespread use in structural applications. Moisture has been identified as one of the major factors affecting joint durability. This is

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Tu, Yijun. "Water absorption and degradation in adhesive joints." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0002/MQ46087.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Adams, Audrey Natasha Natalia. "The durability of organosilane pretreated adhesive joints." Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251962.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Razak, Zeenah. "The durability performance of automotive adhesive joints." Thesis, Imperial College London, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.397238.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Court, R. S. "The long-term durability of adhesive joints." Thesis, University of Cambridge, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.598074.

Testo completo

Abstract (sommario):

Hot-wet ageing was performed on three different adhesive joint systems for over 10,000 hours. Joint strengths were found to decrease with ageing time and failure was near-interfacial in the adhesive. There was no evidence of an adhesion type failure mechanism. A novel video imaging system was developed for one of the joint systems which was transparent, and this gave new, in-situ information on damage initiation and propagation in joints. The material properties of the acrylic and epoxy adhesives used for the joints were needed as input for the theoretical studies. Tensile properties were dete

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Anandarajah, Arumugam. "Fracture mechanics of adhesive joints in shear." Thesis, University of Dundee, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357160.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Martins, da Silva Lucas Filipe. "Adhesive joints for low and high temperatures." Thesis, University of Bristol, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.400421.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

REZAEI, MOHSEN. "Environmental effects on epoxy adhesive and joints." Doctoral thesis, Politecnico di Torino, 2012. http://hdl.handle.net/11583/2497165.

Testo completo

Abstract (sommario):

The use of adhesive joining in mechanical structures, especially in industrial usage, is rapidly increasing. However, to be confident in their use it is essential to evaluate the performance of the joints, especially when their strength tends to decrease upon exposure to warm and humid conditions that cause degradation. Since degradation is a long time process and evaluating the degradation of adhesive joints in normal condition needs several months or years tests, accelerated test under controlled environment is unavoidable. Water can affect both the physical and mechanical properties o

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Puthenparambil, Abhilash. "Effect of bonding pressure on reliability of anisotropic conductive adhesives [sic] joints in a silicon-to-flex-substrate interconnction." Diss., Online access via UMI:, 2006.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Lefebvre, Didier R. "The durability of adhesive joints: an engineering study." Diss., Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/52325.

Testo completo

Abstract (sommario):

Water diffusion through the adhesive is the rate controlling factor for the durability of many metal-to-polymer bonds exposed to moist environments. A methodology is proposed, to relate the diffusion coefficient of water in polymers to temperature, strain and penetrant concentration. The approach used is based on well known free volume theories. In the rubbery state, it is assumed that the transport kinetics is governed by the constant redistribution of the free volume, caused by the segmental motions of the polymeric chains. An expression for the diffusion coefficient is inferred from the tem

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Richardson, Guy. "An investigation of interfacial failure of adhesive joints." Thesis, University of Surrey, 1993. http://epubs.surrey.ac.uk/843357/.

Testo completo

Abstract (sommario):

Interfacial failure in adhesive joints has been studied. It has been shown by previous researchers that adhesive joints often contain bi-material geometric features that give rise to theoretically singular stress/strain fields even when there are no flaws present. It is reasonable to expect that failure occurs at, or close to, these points. To investigate failure under these conditions and to relate it to well understood failure mechanisms, tests were undertaken on uncracked joints (containing a bi-material singularity) and joint geometries with interfacial cracks of varying lengths. To provid

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Ficarra, Christina Helene. "ANALYSIS OF ADHESIVE BONDED FIBER-REINFORCED COMPOSITE JOINTS." NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010626-155040.

Testo completo

Abstract (sommario):

<p>The work presented in this thesis involved the analysis of adhesive bonded joints for composite bridge decks and was divided into three phases. The first phase involved a parametric study on a single lap joint using ANSYS finite element analysis software. The purpose of the parametric study was to alter the geometry and material properties of the joint and study their effects on the stress distribution in both the adherends and adhesive. The four different cases studied included adding a taper to the adherends, different edge shapes on the adhesive layer, a material stiffness imbalance and

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Korin, Christer. "Fracture Behaviour of adhesive Joints in carton board." Licentiate thesis, Karlstad : Faculty of Technology and Science, Chemical Engineering, Karlstad University, 2007. http://www.diva-portal.org/kau/abstract.xsql?dbid=1191.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Steidler, Silvana M. "Structural modelling of adhesive joints in automotive bodies." Thesis, Oxford Brookes University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323906.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

李雁婷 and Ralphaelynne Cochingyan Lee. "Investigation of epoxy and polychloroprene adhesive bonded joints." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1987. http://hub.hku.hk/bib/B3120823X.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Webb, Peter W. "Investigation of the interphasial behaviour of adhesive joints." Thesis, Loughborough University, 2004. https://dspace.lboro.ac.uk/2134/14470.

Testo completo

Abstract (sommario):

The theme of this report is the examination of the interphase. Three different aspects of the interphase have been examined. Firstly, the detrimental effects of contamination upon the interphase were examined. Substrates were contaminated with quantified levels of PDMS (polydimethylsiloxane) in an attempt to create weak boundary layers, and the resulting performance of joints manufactured from these substrates was evaluated. A notable reduction in bond strength was observed with specimens prepared from two different toughened adhesive systems whilst a similar system formulated without any toug

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Mays, Geoffrey Charles. "Fatigue performance and durability of structural adhesive joints." Thesis, University of Dundee, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334180.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Morshed, Syed Ahnaf. "Durability Properties of Nanomodified FRP-Concrete Adhesive Joints." Thesis, University of Louisiana at Lafayette, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=10844250.

Testo completo

Abstract (sommario):

<p> Externally bonded fiber-reinforced polymer (FRP) composites represent a simple and economical solution for many repair and strengthening applications in concrete structures. However, the potential occurrence of sudden and brittle debonding failure in such repairs becomes prominent when FRP-concrete bond undergoes environmental degradation induced by moisture. Ambient-cured low-viscosity Bisphenol A epoxy adhesives are most commonly utilized in the engineering practice to bond wet-layup FRP to the concrete substrate. This study aims to elucidate the effects of Bisphenol A-based epoxy modifi

Gli stili APA, Harvard, Vancouver, ISO e altri

37

O'Brien, Emmett P. "Durability of Adhesive Joints Subjected to Environemntal Stress." Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/29139.

Testo completo

Abstract (sommario):

Environmental stresses arising from temperature and moisture changes, and/or other aggressive fluid ingressions can degrade the mechanical properties of the adhesive, as well as the integrity of an adhesive interface with a substrate. Therefore such disruptions can significantly reduce the lifetime and durability of an adhesive joint.1-4 In this research, the durability of certain epoxy adhesive joints and coatings were characterized using a fracture mechanics approach and also by constant frequency impedance spectroscopy. The shaft-loaded blister test (SLBT) was utilized to measure the strai

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Lee, Ralphaelynne Cochingyan. "Investigation of epoxy and polychloroprene adhesive bonded joints /." [Hong Kong] : University of Hong Kong, 1987. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12359506.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

McGovern, Scott. "The development of embedded sensors to assess the fatigue response of adhesive joints in marine environments." Access electronically, 2007. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20080911.154008/index.html.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Malladi, Sailaja. "Parametric modeling and analysis of structural bonded joints." Morgantown, W. Va. : [West Virginia University Libraries], 2004. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=80.

Testo completo

Abstract (sommario):

Thesis (M.S.)--West Virginia University, 2004.<br>Title from document title page. Document formatted into pages; contains x, 56 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 52-53).

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Rider, A. N. Parslow D. "Progress report on activities in support of composite repair engineering development program tasks AF, AH and AI." Fishermans Bend, Victoria : Defence Science and Technology Organisation, 2006. http://hdl.handle.net/1947/4682.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

42

蘇慶華 and Hing-wa So. "Strength of adhesive-bonded joints immersed in different solutions." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1992. http://hub.hku.hk/bib/B3121096X.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Yen, Hsin-Yi. "NEW ANALYSIS AND DESIGN PROCEDURES FOR ENSURING GAS TURBINE BLADES AND ADHESIVE BONDED JOINTS STRUCTURAL INTEGRITY AND DURABILITY." [Columbus, Ohio] : Ohio State University, 2000. http://www.ohiolink.edu/etd/send-pdf.cgi?osu967666610.

Testo completo

Abstract (sommario):

Thesis (Ph. D.)--Ohio State University, 2000.<br>Includes vita. Title from title page display. Abstract. Advisor: M.-H. Herman Shen, Dept. of Aerospace Engineering, Applied Mechanics, and Aviation. Includes bibliographical references (p. 152-154).

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Li, Shi. "Modeling of active crack damage control and the active fatique damage control of adhesive joint." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-08222009-040330/.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Korin, Christer. "Mechanical Behaviour of Adhesive Joints in Cartonboard for Packaging." Doctoral thesis, Karlstads universitet, Avdelningen för kemiteknik, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-4731.

Testo completo

Abstract (sommario):

A cartonboard package is often sealed and closed with an adhesive – either a hot-melt adhesive (adhesives that are applied in a molten state on the cartonboard) or a dispersion adhesive (adhesives that are applied as water-based dispersions). This thesis focuses on the process of hot-melt gluing, and how material properties and process conditions affect the performance of the adhesive joint. Requirements vary depending on how the package is to be used. A package that is only supposed to protect the product during transport differs from one that is supposed to attract consumers and facilitate t

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Log, Audun Reinsborg. "Fatigue properties of adhesive joints in composite patch repair." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for produktutvikling og materialer, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19034.

Testo completo

Abstract (sommario):

This paper is a master thesis written at NTNU for the Co-Patch project. The Co-Patch project is an EU-funded consortium of 15 organizations from 8 different countries, developing a standard for composite patch repair of steel structures in fire hazard areas. The standard includes methods for dimensioning against delamination. This thesis looks at the fatigue properties in delamination of patches from their substrates. By testing Double Cantilever Beam and End-Notched Flexure specimens in fatigue loading, G-N curves were made for Mode I and Mode II fatigue fracture. This gives an indication of

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Vintilescu, Ion Virgil. "Mixed-mode I-II-III fracture of adhesive joints." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ28870.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Safavi-Ardebili, Vahid. "Micromechanical characterization of the interphase zone in adhesive joints." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0009/NQ35308.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Allin, Jonathan Mark. "Disbond detection in adhesive joints using low frequency ultrasound." Thesis, Imperial College London, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270834.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Frantzis, Panagiotis Thesi. "Environmental attack on adhesive joints : a fracture mechanics approach." Thesis, Imperial College London, 1989. http://hdl.handle.net/10044/1/47440.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!