Segui questo link per vedere altri tipi di pubblicazioni sul tema: Aluminium alloys.

Tesi sul tema "Aluminium alloys"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Aluminium alloys".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.

1

Nafisi, Shahrooz. "Effects of grain refining and modification on the microstructural evolution of semi-solid 356 alloy = Effets de l'affinage des grains et de la modification sur l'évolution microstructurale de l'alliage 356 semi-solide /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Saoudi, Abdelhamid. "Prédiction de la rupture par fatigue dans les pièces automobiles en alliages aluminium /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2008. http://theses.uqac.ca.

Testo completo
Abstract (sommario):
Thèse (D.Eng.) -- Université du Québec à Chicoutimi, 2008.<br>La p. de t. porte en outre: Doctorat en ingénierie, thèse pour l'obtention du titre de Philosophiae Doctor en ingénierie. CaQQUQ Comprend des réf. bibliogr. (f. 174-178). Publié aussi en version électronique. CaQQUQ
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Mohamed, Adel. "Effet des additifs sur la microstructure et les propriétés mécaniques des alliages d'aluminium-silicium /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2008. http://theses.uqac.ca.

Testo completo
Abstract (sommario):
Thèse (D.Eng..) -- Université du Québec à Chicoutimi, 2008.<br>La p. de t. porte en outre: Thèse présenté[e] à l'Université du Québec à Chicoutimi comme exigence partielle du doctorat en ingénierie. CaQQUQ Comprend des réf. bibliogr. (f. [292]-314). Publié aussi en version électronique. CaQQUQ
Gli stili APA, Harvard, Vancouver, ISO e altri
4

El, Sebaie Ossama. "L'effet de l'addition du "mischmetal", du taux de refroidissement et du traitement thermique sur la microstructure et la dureté des alliages Al-Si de type 319, 356, et 413 = Effect of mischmetal, cooling rate and heat treatment on the microstructure and hardness of 319, 3456, and 413 Al-Si alloys /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Matthews, Stephen John. "Cavitation erosion of aluminium alloys, aluminium alloy/ceramic composites and ceramics." Thesis, Coventry University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.317927.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Golbahar, Behnam. "Effect of grain refiner-modifier interaction on the performance of A356.2 alloy." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2008. http://theses.uqac.ca.

Testo completo
Abstract (sommario):
Thèse (M.Eng.) -- Université du Québec à Chicoutimi, 2008.<br>La p. de t. porte en outre: Mémoire présenté à l'Université du Québec à Chicoutimi comme exigence partielle de la maîtrise en ingénierie. CaQQUQ Comprend des réf. bibliogr. (f. 149-155). Publié aussi en version électronique. CaQQUQ
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Yang, Deyu. "Rôle d'addition de magnésium sur l'occurence de la fonte naissante dans les alliages expérimentaux et commerciaux Al-Si-Cu et son influence sur la microstructure et les propriétés de traction de l'alliage = Role of magnesium addition on the occurence of incipient melting in experimental and commercial Al-Si-Cu alloys and its influence on the alloy microstructure and tensile properties /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Blanchette, Hugues. "Développement d'un système de contrôle de qualité pour les lopins d'aluminium semi-solide[s] obtenus avec le procédé SEED /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Wilson, G. R. "Surface studies of aluminium and aluminium alloys." Thesis, University of Newcastle Upon Tyne, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.377646.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Bhattacharya, Victoria. "Study Of Friction And Wear Behaviour Of Nano-Embedded Aluminium Alloys." Thesis, Indian Institute of Science, 2000. https://etd.iisc.ac.in/handle/2005/190.

Testo completo
Abstract (sommario):
In general, the bearing alloys have two types of microstructure i.e., either a soft matrix with discrete hard particles or a continuous matrix of the harder metal with small amount of the softer metal finely dispersed in it. The aluminium and copper based bearing alloys which are widely studied fall in the second category. However, the bearing materials which have been studied have micron sized dispersoids. In recent times, it is possible to produce nanoscale dispersoids in a hard matrix by the novel processing route of rapid solidification. This offers an opportunity to study the small lengt
Gli stili APA, Harvard, Vancouver, ISO e altri
11

Bhattacharya, Victoria. "Study Of Friction And Wear Behaviour Of Nano-Embedded Aluminium Alloys." Thesis, Indian Institute of Science, 2000. http://hdl.handle.net/2005/190.

Testo completo
Abstract (sommario):
In general, the bearing alloys have two types of microstructure i.e., either a soft matrix with discrete hard particles or a continuous matrix of the harder metal with small amount of the softer metal finely dispersed in it. The aluminium and copper based bearing alloys which are widely studied fall in the second category. However, the bearing materials which have been studied have micron sized dispersoids. In recent times, it is possible to produce nanoscale dispersoids in a hard matrix by the novel processing route of rapid solidification. This offers an opportunity to study the small lengt
Gli stili APA, Harvard, Vancouver, ISO e altri
12

Park, Sungbae. "Rheocasting of aluminium alloys." Thesis, University of Oxford, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.670041.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
13

Gustafsson, Sofia. "Corrosion properties of aluminium alloys and surface treated alloys in tap water." Thesis, Uppsala universitet, Institutionen för materialkemi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-157527.

Testo completo
Abstract (sommario):
The aim of this thesis is to obtain a basic knowledge of the factors that affect corrosion of aluminium in tap water for different kinds of applications like water pipes for tap water, solar systems, HVAC&amp;R-applications (like fan coil units on chillers) and heat sinks for electronic or industrial applications. Open systems are used in some applications and closed systems in others. There is a clear difference in the corrosion behaviour of these two systems. The main reasons for this difference are that the content of oxygen differs between the two systems and also that inhibitors can be us
Gli stili APA, Harvard, Vancouver, ISO e altri
14

Turner, Michael. "Brush plating of bearing alloys on aluminium alloy shells." Thesis, Aston University, 1986. http://publications.aston.ac.uk/11919/.

Testo completo
Abstract (sommario):
The turbocharging of diesel engines has led to increase in temperature, load and corrosive attack of plain bearings. To meet these requirements, overlay plated aluminium alloys are now preferred. Currently, lead-tin alloys are deposited using a zincate layer and nickel strike, as intermediate stages in the process. The nickel has undesirable seizure characteristics and the zincate can given rise to corrosion problems. Consequently, brush plating allows the possible elimination of these stages and a decrease in process together with greater automation. The effect of mode application, on the for
Gli stili APA, Harvard, Vancouver, ISO e altri
15

Ammar, Hany. "Effet des imperfections de la coulée sur les propriétés en fatigue des alliages de fonderie aluminium silicium = Effect of casting imperfections on the fatigue properties of aluminum-silicon casting alloys /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
16

Di, Sabatino Marisa. "Fluidity of Aluminium Foundry Alloys." Doctoral thesis, Norwegian University of Science and Technology, Department of Materials Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1735.

Testo completo
Abstract (sommario):
<p>The fluidity of an alloy plays a key role for the foundry and transport industries as it affects the quality and soundness of the cast products. Particularly, fluidity influences the reject rates, hence casting costs and the production of thinwalled, hence light components. Fluidity is a complex technological property and depends on many parameters. However, many aspects of this subject are still not fully understood. The motivation of the research presented in this doctoral thesis was, therefore, to fill this gap in knowledge. The study has aimed at understanding the influence of various p
Gli stili APA, Harvard, Vancouver, ISO e altri
17

Forsman, Tomas. "Laser welding of aluminium alloys /." Luleå, 2000. http://epubl.luth.se/1402-1544/2000/39/index.html.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
18

Yoon, Jong Won. "Laser welding of aluminium alloys." Thesis, University of Cambridge, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343303.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
19

Grant, Patrick S. "Spray forming of aluminium alloys." Thesis, University of Oxford, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.302790.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
20

Etheridge, Andrea Mary. "Conversion coatings on aluminium alloys." Thesis, University of Oxford, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.307051.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
21

Monaghan, David. "Twin roll cast aluminium alloys." Thesis, University of Oxford, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357441.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
22

Allen, C. M. "Nucleation studies in aluminium alloys." Thesis, University of Oxford, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.388896.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
23

Dudgeon, Helen D. "Fatigue of aluminium-lithium alloys." Thesis, University of Oxford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.276536.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
24

Deekhunthod, Rujira Ninni. "Weld Quality in Aluminium Alloys." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-226136.

Testo completo
Abstract (sommario):
The aims of this project are to present an understanding in what happens when aluminium-(Al) alloys are welded, and to investigate how the Mg-, Si- and Cr-contents in AA6005A influence the weld strength and cracking susceptibility. It is known that heat from welding affects the mechanical properties (strength) of the material. Different heat cycles during welding are one of the main reasons that the strength varies. Welding can cause various phenomena such as decreased strength, porosity, deformation, cracks and corrosion. To minimize these phenomena one has to have a balance between the weldi
Gli stili APA, Harvard, Vancouver, ISO e altri
25

Maddrell, Ewan Robert. "Diffusion bonding of aluminium alloys." Thesis, University of Cambridge, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.317935.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
26

Parson, N. C. "Extrusion of aluminium-lithium alloys." Thesis, Imperial College London, 1985. http://hdl.handle.net/10044/1/37814.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
27

Kim, Yoomi. "Oxidation of niobium-aluminium alloys." Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.624866.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
28

Quested, Thomas Edward. "Solidification of inoculated aluminium alloys." Thesis, University of Cambridge, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.614829.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
29

Bunn, Alice Mary. "Grain refinement in aluminium alloys." Thesis, University of Cambridge, 1999. https://www.repository.cam.ac.uk/handle/1810/284033.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
30

Pereira, Diogo Jorge O. A. "Friction surfacing of aluminium alloys." Master's thesis, Faculdade de Ciências e Tecnologia, 2012. http://hdl.handle.net/10362/8758.

Testo completo
Abstract (sommario):
Dissertação para a obtenção do grau de Mestre em Engenharia Mecânica<br>Friction surfacing is a solid state joining process that has attracted much interest in the past decades. This technology allows joining dissimilar metallic materials while avoiding the brittle intermetallic formations, involving temperatures bellow melting point and producing like forged metal structures. Much research using different steels has been made but the same does not happen with aluminium alloys, specially using different aluminium alloys. Friction surface coatings using consumable rods of AA6082-T6 were produ
Gli stili APA, Harvard, Vancouver, ISO e altri
31

Hunt, Anthony W. "Fatigue of commercial aluminium alloys." Thesis, Aston University, 1986. http://publications.aston.ac.uk/11901/.

Testo completo
Abstract (sommario):
Fatigue crack propagation has been observed for a number of commercial aluminium alloys. Comparable data was obtained for a variety of crack and specimen geometries over a range of crack lengths for a given alloy. Where crack propagation only was of interest the initiation event has been excluded by pre-cracking the specimen using a fin of material adjacent to the crack face. By this method a controlled defect size is introduced in to the specimen. By modification of the D.C. potential drop method it has been shown possible to measure the growth of cracking from 0.12mm by this method. Crack gr
Gli stili APA, Harvard, Vancouver, ISO e altri
32

Chama, Shadreck. "Mechanically alloyed aluminium-magnesium-lithium alloys : structure property relations." Thesis, University of Liverpool, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.399120.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
33

Shirandasht, Jamshid. "Évaluation de la technique LiMCA II pour la mesure d'inclusions dans l'aluminium pur et l'alliage binaire Al-6%Si : rôle de la température de coulée /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2005. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
34

Ergin, Guvenc. "Étude de la mouillabilité des particules granulaires par les alliages d'aluminium durant la filtration d'aluminium /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Testo completo
Abstract (sommario):
Thèse (D.Eng.) -- Université du Québec à Chicoutimi, 2006.<br>La p. de t. porte en outre: Thèse présentée à l'Université du Québec à Chicoutimi pour l'obtention du doctorat en ingénierie. CaQCU Bibliogr.: f. 130-147. Document électronique également accessible en format PDF. CaQCU
Gli stili APA, Harvard, Vancouver, ISO e altri
35

Gagnon, Dominique. "Effets des paramètres métallurgiques sur la microstructure, la macrostructure et la performance des alliages 319, 356 et 413 /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2005. http://theses.uqac.ca.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
36

Ganguly, Supriyo. "Non-destructive measurement of residual stresses in welded aluminium 2024 airframe alloy." Thesis, n.p, 2004. http://ethos.bl.uk/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
37

Schaffer, Paul. "Grain refiner fade in aluminium alloys /." [St. Lucia, Qld.], 2004. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe18566.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
38

Riestra, Martin. "High performing cast aluminium-silicon alloys." Licentiate thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Material och tillverkning, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-38005.

Testo completo
Abstract (sommario):
The need to produce lighter components due to environmental aspects and the development of electrical vehicles represents an opportunity for cast aluminium-silicon alloys. With high specific strength, good castability, high corrosion resistance and recyclability, these alloys offer an attractive combination of properties as an alternative to steel, cast iron and titanium-based components in certain applications. To take advantage of such a combination of properties, there is a need to ensure that they can be reliably achieved. In other words, high performing components need to be produced. For
Gli stili APA, Harvard, Vancouver, ISO e altri
39

Hewitt, Paul. "Second phase dissolution in aluminium alloys." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/38032.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
40

Talbot, D. E. J. "Hydrogen in aluminium and its alloys." Thesis, Brunel University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.235894.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
41

Bransden, Antony Stuart. "Laser surface alloying of aluminium alloys." Thesis, Coventry University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241106.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
42

Han, Do-Suck. "Deformation of semi-solid aluminium alloys." Thesis, University of Oxford, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.325223.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
43

Pakes, Andrew. "Anodising aluminium alloys in borax electrolyte." Thesis, University of Manchester, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.558167.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
44

Sotoudeh, Kasra. "Fundamentals of superplasticity in aluminium alloys." Thesis, University of Manchester, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488771.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
45

Alshmri, Faraj D. F. "Rapidly solidified aluminium-high silicon alloys." Thesis, University of Leicester, 2010. http://hdl.handle.net/2381/9952.

Testo completo
Abstract (sommario):
Aluminium silicon alloys are the most used raw material for automotive applications. One of the main limitations on using aluminium high silicon alloys is the formation of coarse brittle phases under conventional solidification conditions. However, rapid solidification processing (RS) is very effective in limiting the coarsening of primary silicon due to high cooling rate. Aluminium high silicon alloys can be processed by different RS methods. However, melt spinning is the most familiar of all RS commercial methods. Rapid solidification is a material production route. It does not give the fina
Gli stili APA, Harvard, Vancouver, ISO e altri
46

Okon, Panton. "Laser conduction welding of aluminium alloys." Thesis, University of Liverpool, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.400234.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
47

Jirattiticharoean, Worawit. "Thixoforming of wrought 7xxx aluminium alloys." Thesis, University of Sheffield, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.421145.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
48

Makin, P. L. "Recrystallization in aluminium-lithium based alloys." Thesis, University of Cambridge, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356656.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
49

Torrescano, Alvarez Jeanette. "Hard anodic films for aluminium alloys." Thesis, University of Manchester, 2018. https://www.research.manchester.ac.uk/portal/en/theses/hard-anodic-films-for-aluminium-alloys(70029c32-b09f-452d-ba17-223facc3ee12).html.

Testo completo
Abstract (sommario):
This work aims to investigate the effects of current density, electrolyte temperature and substrate composition on the morphology of porous anodic films formed on AA 2024-T3 alloy in sulphuric acid electrolytes and the factors that determine the transition between linear and sponge-like film porosities. Comparisons were made with pure aluminium. Particular attention is given to understanding the rising voltage that occurs during galvanostatic hard anodizing of the alloy and the role of oxygen in the anodizing process. Conditions were selected to be representative of typical hard and convention
Gli stili APA, Harvard, Vancouver, ISO e altri
50

Van, den Bos Christopher. "Electrochemical surface processing of aluminium alloys." Thesis, University of Cambridge, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.621140.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!