Accedi

Bibliografie tematiche / Building finishes

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Building finishes"

Autore: Grafiati

Pubblicato: 7 giugno 2025

Ultima modifica: 2 agosto 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Building finishes".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Building finishes"

1

Adedeji, Y. M. D., and A. A. Taiwo. "Sustainable Building Finishes: Use of Renewable Standardized Wood-Based Material in Nigeria." Advanced Materials Research 587 (November 2012): 134–38. http://dx.doi.org/10.4028/www.scientific.net/amr.587.134.

Testo completo

Abstract (sommario):

This paper reports a research on sustainable building finishes in Nigeria. Because the building industry consumes a substantial percentage of the materials entering the global economy, and is responsible for the emission of almost half of the global greenhouse gases, it is important to consider the aspect of material efficiency as a component of achieving sustainability. This paper critically appraises this development as the use of the renewable wood-based materials has impacted remarkable success towards achieving sustainable building finishes in the country. It reports findings on the autho

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Musa, Lazarus, Dangana Tizhe Halla, and Sawa Sarah. "Appreciation of Finish Specification in Room Space Condition Modification among Graduates of Architecture in Nigeria." International Journal of Innovative Science and Research Technology 7, no. 10 (2022): 1884–88. https://doi.org/10.5281/zenodo.7332561.

Testo completo

Abstract (sommario):

- Interior finishes are specified based on function of room space, to make rational specification, physical and special qualities of finishes must be known. The study is guided by the drive to find out how graduates of Architectural Technology and Architectural science, respond to characteristics of interior finishes that includes sheets, boards, panels and paints. Statements on physical properties of finishes enquired on temperature, acoustics, illumination and moisture/humidity, while wealth, aesthetics, mosquito, fire and algae/moulds were presented for special properties. These were admini

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Onuorah, Ikenna Michael, Agbonome P.C., and Bons N. Obiadi. "Classification of Igbo Traditional Building Finishes using Architectural Standard for Preservation of the Material Culture of a People." International Journal of Research and Innovation in Social Science VII, no. VI (2023): 590–604. http://dx.doi.org/10.47772/ijriss.2023.7645.

Testo completo

Abstract (sommario):

The Igbo people in Nigeria have a rich cultural heritage, including their unique building techniques and finishes. Traditional building finishes, such as mud plastering, natural dyeing, and intricate wood carvings, were once highly valued due to their availability, affordability, and cultural significance. However, with globalization and increased access to imported construction materials, there has been a shift away from traditional finishes towards imported alternatives. Imported building finishes such as ceramic tiles, synthetic paints, and industrial coatings have become popular due to the

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Dixit, Manish K., Shashank Singh, Sarel Lavy, Wei Yan, Fatemeh Pariafsai, and Mohammadreza Ostadalimakhmalbaf. "Floor finish selection in the design of healthcare facilities: a survey of facility managers." Facilities 37, no. 9/10 (2019): 571–99. http://dx.doi.org/10.1108/f-04-2018-0047.

Testo completo

Abstract (sommario):

Purpose The purpose of this study is to create a knowledge base for decision-making in healthcare design by seeking, analyzing and discussing the preferences of facility managers of healthcare facilities regarding floor finishes and their selection criteria. The goal is to enable a simplified and holistic selection of floor finishes based on multiple criteria. The authors studied floor finish selection in three healthcare units: emergency, surgery and in-patient units. Design/methodology/approach The authors completed a literature review to identify types of floor finishes currently used in he

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Kim, Sihyun, Min Htet Myint, Youngsu Yu, Wonbok Lee, Tae Wan Kim, and Bonsang Koo. "Application of Parametric Modeling Techniques for Automated Detailing of Exterior Finishes in Architectural BIM Models: A South Korean Case Study." Buildings 14, no. 12 (2024): 4013. https://doi.org/10.3390/buildings14124013.

Testo completo

Abstract (sommario):

The South Korean government has mandated the use of Building Information Modeling (BIM) as the main medium for design deliverables in public projects. Such stipulations require detailed BIM models to be submitted in the detailed design phases, which places a burden especially on small- to medium-sized design firms. The requirement means that both the interior and exterior finishes of a building need to be explicitly modeled, which when performed manually is labor intensive and error prone. The goal of this study was to apply parametric modeling techniques to automatically model such details, f

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Thompson, Cheryl A. "Pharmacy Practice Model Initiative finishes consensus-building process." American Journal of Health-System Pharmacy 67, no. 24 (2010): 2078–82. http://dx.doi.org/10.2146/news100081.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Vilventhan, Aneetha, and Rajadurai R. "Implementation of Value Stream Mapping For Building Finishes." Journal of Real Estate, Construction & Management 33, no. 2 (2018): 49–55. https://doi.org/10.1177/2977657020180206.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Serneels, Nick, Philippe Lemineur, and Marieke Jaenen. "PLASTIC FINISHES IN 1960s BELGIAN OFFICE BUILDINGS." Docomomo Journal, no. 66 (December 12, 2022): 33–39. http://dx.doi.org/10.52200/docomomo.66.04.

Testo completo

Abstract (sommario):

This paper focusses on the presence of visible synthetic materials (plastics) and finishes from the 1960s in the interior of office buildings. Although the ongoing research on synthetic materials as art pieces is well developed, building components from the interior and exterior of Belgian patrimony have not yet been studied, and remain undervalued as integral components of heritage buildings. The research presented in this paper tackles this issue by examining two specialized Belgian journals, namely La Technique des Travaux and La Maison. A selection of case studies from these two journals w

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Okazaki, Taichiro, Dimitrios G. Lignos, Mitsumasa Midorikawa, James M. Ricles, and Jay Love. "Damage to Steel Buildings Observed after the 2011 Tohoku-Oki Earthquake." Earthquake Spectra 29, no. 1_suppl (2013): 219–43. http://dx.doi.org/10.1193/1.4000124.

Testo completo

Abstract (sommario):

A joint U.S.–Japan reconnaissance team examined the damage to steel building structures caused by the 2011 Tohoku-oki earthquake. In the city of Sendai, where the peak horizontal ground acceleration exceeded 1 g, the majority of steel buildings performed well. Buildings that used older cladding systems for external finish sustained damage to their claddings even if their structural performance was excellent. Damage to a few braced frames offer insight into the seismic design of bracing connections. In areas attacked by the violent tsunami, many steel buildings stood upright after the tsunami s

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Martinez, Frank, Ana Alvarez, and Peter Kiliddjian. "H. George Fink Studio, Coral Gables, Florida." Journal of Traditional Building, Architecture and Urbanism, no. 3 (November 8, 2022): 74–93. http://dx.doi.org/10.51303/jtbau.vi3.587.

Testo completo

Abstract (sommario):

This article discusses the challenges associated with the preservation and hurricane code compliance of a significant 1920s Mediterranean Revival building in South Florida: the H. George Fink Studio. It is seen as the first Mediterranean Revival building in Coral Gables, Florida. Though almost 100 years old, most of its significant original elements and finishes are intact, providing a special opportunity to preserve those elements and finishes. Martinez Alvarez Architecture and partners performed a thorough on-site assessment, documentation and study of contemporary buildings in order to arri

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Building finishes"

1

Chung, Chan-keung, and 鍾振強. "From fair-faced brickwork to painted surfaces: wall finishes in Hong Kong's ancestral halls, study hallsand residential building." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B31476892.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Chung, Chan-keung. "From fair-faced brickwork to painted surfaces wall finishes in Hong Kong's ancestral halls, study halls and residential building /." Click to view the E-thesis via HKUTO, 2003. http://sunzi.lib.hku.hk/hkuto/record/B31476892.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Ors, Kerime. "An Investigation On Compatibility Properties Of Exterior Finish Coats For Insulated Walls In Terms Of Water Vapour Pemeability And Modulus Ofelasticity." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12607741/index.pdf.

Testo completo

Abstract (sommario):

The compatibility properties of some contemporary finish coats together with their complementary layers used in insulated exterior walls were examined in terms of water vapour permeability and modulus of elasticity. Basic physical and mechanical properties of some synthetic-, cement- and polymer-based external finish coats were analyzed in laboratory. Some additional samples, complementing the wall section, were also examined for their water vapour permeability. Results showed that the finish coats were high vapour permeable although they had high resistance to water vapour permeation, which

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Zmyslo, Ronald J. "A study on the effects of sidewall insulation on the performance of exterior paint finishes on frame, wood-clad historic houses." 2012. http://liblink.bsu.edu/uhtbin/catkey/1698827.

Testo completo

Abstract (sommario):

Presently, there exists a large number of historic houses that have had their walls insulated with loose-fill cellulose and can now be studied 10, 20 or 30 years after they were insulated. The wood siding of these houses can be evaluated for types of paint failure and compared to comparable historic houses that have not had their sidewalls insulated. A methodology for defining common paint failure types, their presence and possibly their severity was designed. A methodology for the selecting of historic houses with both insulated and uninsulated walls was also designed. A visual documentation

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Li, Taso-Hen, and 李兆亨. "A study on the Fire Safety of Interior Finishes: Residential Buildings in Kaohsiung City taken as Examples." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/64124891996921121088.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

"Graduation is Not the Finish Line: Building Professional Teacher Identity in Preservice Teachers." Doctoral diss., 2019. http://hdl.handle.net/2286/R.I.53498.

Testo completo

Abstract (sommario):

abstract: Teacher candidates completing their senior year student teaching practicum as part of the Mary Lou Fulton Teachers College at Arizona State University are expected to graduate as professional, high-quality teachers who are classroom-ready and dedicated to the profession. One lacking component of the program is the opportunity for teacher candidates to have personalized learning experiences that develop professional teacher identity in addition to the development of enhanced teaching skills. To address this, an intervention of an Action Research Project (ARP) was added to the final

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Chang, Hsiang-shou, and 張祥壽. "A Study of Fire Protection Safety and Examination Operations of Building Interior Finish Works." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/82361277120406915945.

Testo completo

Abstract (sommario):

碩士<br>中原大學<br>室內設計學系<br>87<br>Safety of fire protection and examination operations are very much related topics. Both of them involve public safety and application legalization. Safety of fire protection is especially a professional technique and is difficult to be comprehended by common interior finish subcontractors. Currently, even the technicians completing training programs and/or certified professional technicians have difficulty in carrying out fire protection safety and examination operations. To understand the situation, one may find that the main problem is no regulation f

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Huamg, Hui-Tsu, and 黃惠資. "Application of Exterior Insulation Finish System to the Renovation for External Wall in Residential Building." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/25ev2d.

Testo completo

Abstract (sommario):

碩士<br>國立臺灣科技大學<br>建築系<br>99<br>The refurbishment industry of exterior walls is quickly rising in the market, due to the importance of urban landscape has been concerned in Taiwan. The traditional renovation method of exterior walls has brought amount of dust, noise, and vibration, and is inflexible to the renewed changes in the future. The weather is general hot in Taiwan which has resulted the problem of western exposure and solar radiation in buildings. And the exterior walls of buildings are general with low insulation which has resulted the interior high temperature. The demand for air-con

Gli stili APA, Harvard, Vancouver, ISO e altri

Libri sul tema "Building finishes"

1

Yan, Li, and Ren Shuxia. Building decorative materials. Woodhead Publishing, 2011.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Levy, Sidney M. Construction building envelope and interior finishes databook. McGraw Hill, 2001.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Levy, Sidney M. Construction building envelope and interior finishes databook. McGraw Hill, 2001.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Forsyth, Michael, and Lisa White, eds. Interior Finishes & Fittings for Historic Building Conservation. Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444344837.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Bliss, Steven. Best practices guide to residential construction: Materials, finishes, and details. Wiley, 2006.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Stookey, Scott. Flammable finishes: Application guide. 2nd ed. International Code Council, 2010.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Hall, William R. Contract interior finishes: A handbook of materials, products, and applications. Whitney Library of Design, 1993.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Pan, Yanping. Zhuang shi gong cheng chuang wu zhi liang tong bing shou ce. Zhongguo jian zhu gong ye chu ban she, 1998.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Council, International Code. 2003 IBC fire risks of interior finishes: Based on the 2003 international building code® (IBC®) AND 2003 international fire code® (IFC®). International Code Council, 2004.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Engel, Andy. Building stairs. Taunton, 2007.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Building finishes"

1

Seeley, Ivor H., and Roger Winfield. "Internal Finishes." In Building Quantities Explained. Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-14653-6_9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Glover, Peter. "Finishes and Surfaces." In Building Surveys, 9th ed. Routledge, 2022. http://dx.doi.org/10.1201/9781003307112-8.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Miles, Derek, and Paul Syagga. "10. Building finishes." In Building Maintenance. Practical Action Publishing, 1987. http://dx.doi.org/10.3362/9781780441771.010.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Son, Lee How, and George C. S. Yuen. "Finishes and Decorations." In Building Maintenance Technology. Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-23150-8_13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Holmes, Stafford, and Michael Wingate. "External renders and thrown finishes." In Building with Lime. Practical Action Publishing, 2002. http://dx.doi.org/10.3362/9781780441047.007.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Forsyth, Michael. "Conservation of the Historic Interior." In Interior Finishes & Fittings for Historic Building Conservation. Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444344837.ch1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

White, Lisa. "Ceramic and glass." In Interior Finishes & Fittings for Historic Building Conservation. Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444344837.ch10.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

White, Lisa. "The Impact of Historic Lighting." In Interior Finishes & Fittings for Historic Building Conservation. Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444344837.ch11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Baty, Patrick. "Paint Colour and Paintwork." In Interior Finishes & Fittings for Historic Building Conservation. Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444344837.ch12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Finlay, James. "Recreating Historic Schemes of Interior Decoration." In Interior Finishes & Fittings for Historic Building Conservation. Wiley-Blackwell, 2011. http://dx.doi.org/10.1002/9781444344837.ch13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Building finishes"

1

Greigger, Paul P. "Repainting Monumental Buildings." In Paint and Coatings Expo (PACE) 2006. SSPC, 2006. https://doi.org/10.5006/s2006-00030.

Testo completo

Abstract (sommario):

Abstract Metal curtain wall and extrusions in prominent office buildings may need to be repainted either because the original factory applied finishes have dulled or because the owner wants to give the building a fresh look. Many monumental buildings are constructed with factory painted aluminum or steel cladding (curtain wall) and window extrusions. These buildings need to be repainted with field applied coatings that match the appearance and durability of the factory finishes. This paper will discuss the details of painting the exterior of tall buildings. Surface preparation, primers and ava

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Jancy, Howard. "Coloring Stains for Concrete." In Paint and Coatings Expo (PACE) 2009. SSPC, 2009. https://doi.org/10.5006/s2009-00021.

Testo completo

Abstract (sommario):

Abstract Concrete is an inherently attractive building material. It expresses the natural appeal of stone by its mass and permanence. With the addition of natural looking color variations, concrete as stone, is even more realistic. Concrete stains are an excellent choice for producing colors often found in earth and rock. When combined with simple and creative application techniques, stains allow for truly unique concrete installations, which complement a variety of hardscape and flooring designs. Stains are also quite useful for finishes that are more contemporary. Concrete floors, countertop

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Williams, John C. "Selection and Specifications for Architectural and Industrial Maintenance Coatings for Commercial Architecture." In SSPC 2013 Greencoat. SSPC, 2013. https://doi.org/10.5006/s2013-00074.

Testo completo

Abstract (sommario):

Abstract Selection of coating systems for commercial projects may appear to be a simple task, but, to ensure a successful project the Architect or the Engineer needs to perform a thorough and appropriate evaluation of the project to match the right coating systems with the required substrates and environments. Commercial architecture defines more than just simple office buildings; it may include highly complex transportation centers, convention centers, state-of-the-art office structures, sports facilities, and educational facilities at all levels. Each of these building types, while commercia

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Reinstadtler, Steven. "Case History: Decorative Yet Functional Floor Coating at the Energy Innovation Center." In SSPC 2016 Greencoat. SSPC, 2016. https://doi.org/10.5006/s2016-00060.

Testo completo

Abstract (sommario):

Abstract The Energy Innovation Center’s approximately 80-year-old concrete floor had significant divots and was badly spalled and cracked. The concrete floor, often referred to as “The Racetrack” due to its oval shape, serves as the main hallway to a newly renovated technology hub and needed significant structural and aesthetic work. The re-finished floor had to offer durable functionality as well as blend into the neo-industrial look of the re-tasked building. This paper will cover the building’s history; the key challenges of repairing an aged concrete floor; surface preparation and cementit

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Trimber, Kenneth A., Kevin J. Brown, and Kevin D. Knight. "Coating Problems Faced by Commercial Building Owners." In SSPC 2011. SSPC, 2011. https://doi.org/10.5006/s2011-00074.

Testo completo

Abstract (sommario):

Big box stores typically consist of a steel framework of structural columns and roof joists overlaid with roof decking. Walls are usually Single Wythe concrete masonry units (CMU), tilt up concrete panels, or colored block and brick. The CMU often consists of one or more block types - smooth face, split face, or scored block, all of which are painted. Smooth tilt up panels are painted or sealed, and colored block and brick are sealed. The walls may also be covered with an Exterior Insulation and Finish System (EIFS) or stucco, both of which are painted.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Dempster, Bill. "Pre-Manufactured Architectural Fire Protection." In Paint and Coatings Expo (PACE) 2010. SSPC, 2010. https://doi.org/10.5006/s2010-00012.

Testo completo

Abstract (sommario):

Abstract A recent technology has been introduced where improved mechanical durability and aesthetically pleasing finish is achieved using pre-manufactured intumescent fire protection. This paper will detail how the pre-manufactured intumescent technology will provide an attractive alternative to spray application to achieve up to 2 hour rating with simple installation techniques that result in ultra smooth, no orange peel finish. This alternative process can be used on new construction, maintenance and building retrofits with little disruption on the job site.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Simkins, David. "Air Balancing Is More than a Building Science." In SSPC 2014 Greencoat. SSPC, 2014. https://doi.org/10.5006/s2014-00054.

Testo completo

Abstract (sommario):

Since the World War II era, desiccant dehumidification technology has been utilized to protect technical equipment and ocean going cargo from the negative effects of corrosion. In fact, the use of desiccant dehumidifiers has been the backbone of the structural remediation industry in the wake of devastating hurricanes and floods for nearly half a century. In the early 80s, this technology was introduced to the coatings industry as a method to help control flash rusting, enabling the applicator to provide a superior finish even in the harshest environments. This new process provided a solution

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Collins, Tony, Adam Well, and Thomas Williams. "Flow Forming as a Manufacturing Technique for Building Critical Pressure Housings: Considerations and Case Study." In CORROSION 2020. NACE International, 2020. https://doi.org/10.5006/c2020-14856.

Testo completo

Abstract (sommario):

Abstract Flow forming is a cold-work process that reduces the wall thickness of a tubular by forming it over a mandrel. This enables efficient production of tubulars and can be used to increase the strength of the material via cold working. Though the flow forming process is straightforward, the alloy chemistry, microstructural cleanliness, cold reduction, residual stress orientation, and stress corrosion cracking susceptibility of the finished tubulars must be considered. Also, flow formers have reported issues related to the formation of defects at cold work levels well below the alloy’s duc

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Daigo, Yuzo, Katsuo Sugahara, and Kosuke Kuwabara. "Sensitivity of Localized Corrosion of Additively Manufactured Alloy N06210 in Green Death Solution." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13249.

Testo completo

Abstract (sommario):

Abstract Additively manufactured (AM) Nickel, Titanium and Cobalt base alloys have been intensively developed for turbine, sour gas and medical applications. It was previously reported that the low porosity product of AM N06210 fabricated by selective laser melting showed corrosion rates in several acidic solutions similar to the ones of corresponding wrought N06210 alloys. And the corrosion rates of high porosity AM products of N06210 became higher. The present paper reports on dependency of pitting and crevice corrosion sensitivity of AM N06210 in green death solution on porosity, surface fi

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Angelini, Lorella. "Extending the Function of Concrete as a Cladding Material." In SSPC 2007. SSPC, 2007. https://doi.org/10.5006/s2007-00002.

Testo completo

Abstract (sommario):

Abstract “Tilt-up” is a state-of-the-art building system in which steel reinforced concrete panels are cast on site and tilted up into their final position. The tilt-up panels are load bearing and also function as cladding elements. With the exceptions of integrally colored concrete, tilt-up concrete panels can look bare and unattractive if a finish is not applied. It is also well known that concrete is not a “perfect” material as it shows porosity and micro-cracks which can lead to deterioration over time. High-build coatings are an ideal solution for tilt-up concrete panels because they can

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Building finishes"

1

Snijder, Mieke, and Marina Apgar, J. How Does Participatory Action Research Generate Innovation? Findings from a Rapid Realist Review. Institute of Development Studies (IDS), 2021. http://dx.doi.org/10.19088/clarissa.2021.009.

Testo completo

Abstract (sommario):

This Emerging Evidence Report shares evidence of how, for whom, and under what circumstances, Participatory Action Research (PAR) leads to innovative actions. A rapid realist review was undertaken to develop programme theories that explain how PAR generates innovation. The methodology included peer-reviewed and grey literature and moments of engagement with programme staff, such that their input supported the development and refinement of three resulting initial programme theories (IPTs) that we present in this report. Across all three IPTs, safe relational space, group facilitation, and the a

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Schiller, Brandon, Tara Hutchinson, and Kelly Cobeen. Cripple Wall Small-Component Test Program: Dry Specimens (PEER-CEA Project). Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2020. http://dx.doi.org/10.55461/vsjs5869.

Testo completo

Abstract (sommario):

This report is one of a series of reports documenting the methods and findings of a multi-year, multi-disciplinary project coordinated by the Pacific Earthquake Engineering Research Center (PEER) and funded by the California Earthquake Authority (CEA). The overall project is titled “Quantifying the Performance of Retrofit of Cripple Walls and Sill Anchorage in Single-Family Wood-Frame Buildings,” henceforth referred to as the “PEER–CEA Project.” The overall objective of the PEER–CEA Project is to provide scientifically based information (e.g., testing, analysis, and resulting loss models) that

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Schiller, Brandon, Tara Hutchinson, and Kelly Cobeen. Cripple Wall Small-Component Test Program: Wet Specimens II (PEER-CEA Project). Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2020. http://dx.doi.org/10.55461/ldbn4070.

Testo completo

Abstract (sommario):

This report is one of a series of reports documenting the methods and findings of a multi-year, multi-disciplinary project coordinated by the Pacific Earthquake Engineering Research Center (PEER and funded by the California Earthquake Authority (CEA). The overall project is titled “Quantifying the Performance of Retrofit of Cripple Walls and Sill Anchorage in Single-Family Wood-Frame Buildings,” henceforth referred to as the “PEER–CEA Project.” The overall objective of the PEER–CEA Project is to provide scientifically based information (e.g., testing, analysis, and resulting loss models) that

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Schiller, Brandon, Tara Hutchinson, and Kelly Cobeen. Cripple Wall Small-Component - Test Program: Comparisons (PEER-CEA Project). Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2020. http://dx.doi.org/10.55461/lohh5109.

Testo completo

Abstract (sommario):

This report is one of a series of reports documenting the methods and findings of a multi-year, multi-disciplinary project coordinated by the Pacific Earthquake Engineering Research Center (PEER) and funded by the California Earthquake Authority (CEA). The overall project is titled “Quantifying the Performance of Retrofit of Cripple Walls and Sill Anchorage in Single-Family Wood-Frame Buildings,” henceforth referred to as the “PEER–CEA Project.” The overall objective of the PEER–CEA Project is to provide scientifically based information (e.g., testing, analysis, and resulting loss models) that

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Schiller, Brandon, Tara Hutchinson, and Kelly Cobeen. Cripple Wall Small-Component Test Program: Wet Specimens I (PEER-CEA Project). Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2020. http://dx.doi.org/10.55461/dqhf2112.

Testo completo

Abstract (sommario):

This report is one of a series of reports documenting the methods and findings of a multi-year, multi-disciplinary project coordinated by the Pacific Earthquake Engineering Research Center (PEER and funded by the California Earthquake Authority (CEA). The overall project is titled “Quantifying the Performance of Retrofit of Cripple Walls and Sill Anchorage in Single-Family Wood-Frame Buildings,” henceforth referred to as the “PEER–CEA Project.” The overall objective of the PEER–CEA Project is to provide scientifically based information (e.g., testing, analysis, and resulting loss models) that

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Gouveia, Elvis, Fernando Diaz, Sadi Datsch, and William D'Andrea Fonseca. HBK 2255 with Building Acoustics Partner. Sociedade Brasileira de Acústica, 2024. https://doi.org/10.55753/aev.v39e56.282.

Testo completo

Abstract (sommario):

The day-to-day acoustic performance measurements according to the standard ABNT NBR 15575:2021 require light and robust equipment with integrated solutions that facilitate service and reduce the possibility of errors. Considering such needs, HBK has developed a product line focused on the daily life of construction sites. The HBK 2255 sound level meter, integrated into the Building Acoustics Partner, assists decision-making during measurement with predefined steps for measuring and real-time data visualization. The HBK 2255 can be controlled remotely via Wi-Fi or Bluetooth, eliminating the nee

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Gaul, Stephen B., Isabel T. Harris, and D. L. Hank Harris. Molecular Characterization of Multidrug Resistant Salmonella Isolates From a Single Finisher Building for Determination of Horizontal Transmission of Resistance Genes. Iowa State University, 2005. http://dx.doi.org/10.31274/ans_air-180814-1094.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Anderton, Gary, Ernest Berney, John Newman, Travis Mann, Chad Gartrell, and Daniel Miller. Joint Rapid Airfield Construction (JRAC) Program 2004 Demonstration Project--Fort Bragg, North Carolina. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/40139.

Testo completo

Abstract (sommario):

This report describes the demonstration of technologies and procedures developed during April 2002 and May 2004 under the Joint Rapid Airfield Construction (JRAC) Program. The demonstration took place at Sicily Landing Zone (LZ) at Fort Bragg, NC, in July of 2004. The objective of the exercise was to demonstrate the procedures and technologies developed under the JRAC Program by rapidly building two parking aprons capable of supporting C-130 transport aircraft taxiing and parking operations. The exercise was conducted under continuous 24-hr operations to simulate a real-world rapid constructio

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Stickney, Christy. Many Paths to a Home: Emerging Business Models for Latin America and the Caribbean's Base of the Pyramid. Inter-American Development Bank, 2014. http://dx.doi.org/10.18235/0006231.

Testo completo

Abstract (sommario):

The lack of adequate housing is a problem throughout Latin America and the Caribbean (LAC). Almost 40 percent of families in the region live in a house beyond repair, have no title, or lack water, sewerage, electricity, adequate building materials, or space. It is estimated that by 2015, that number will increase by 10 percent. Only an investment of at least $310 billion will close the region's current housing gap, that is 7.8 percent of LAC's GDP. The demand for improved housing among the base of the pyramid (BOP) has been consistently strong and represents a relatively steady proportion of t

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Schiller, Brandon, Tara Hutchinson, and Kelly Cobeen. Comparison of the Response of Small- and Large-Component Cripple Wall Specimens Tested under Simulated Seismic Loading (PEER-CEA Project). Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2020. http://dx.doi.org/10.55461/iyca1674.

Testo completo

Abstract (sommario):

This report is one of a series of reports documenting the methods and findings of a multi-year, multi-disciplinary project coordinated by the Pacific Earthquake Engineering Research Center (PEER and funded by the California Earthquake Authority (CEA). The overall project is titled “Quantifying the Performance of Retrofit of Cripple Walls and Sill Anchorage in Single-Family Wood-Frame Buildings,” henceforth referred to as the “PEER–CEA Project.” The overall objective of the PEER–CEA Project is to provide scientifically based information (e.g., testing, analysis, and resulting loss models) that

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!