Accedi

Bibliografie tematiche / Composites

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Composites"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 25 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Composites".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Composites"

1

Zhou, Hao, Qing Meng Zhang, Qun Tang, Hang Cui, Yao Hua Xu, and Jun Du. "Effect of the Difference in Dielectric Constant of the Phases on Dielectric Property of the Composites." Materials Science Forum 814 (March 2015): 137–43. http://dx.doi.org/10.4028/www.scientific.net/msf.814.137.

Testo completo

Abstract (sommario):

The composites have a great use in practical application. In common, the phases in composite have different relative dielectric constant and in order to reveal how the phases with different permittivity affect the composite’s dielectric properties, the experiments were carried out using inorganic and organic composite with different dielectric constant phases to make that clear. The barium niobate-based SiO2system glass–ceramic and fillers-epoxy resin composites were chosen, and the dielectric properties were tested to compare the difference of those composites. The results show that the exist

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Kobayashi, Junya, Masahiro Kaneko, Chamaiporn Supachettapun, et al. "Mechanical Properties and Reinforcement of Paper Sheets Composited with Carboxymethyl Cellulose." Polymers 16, no. 1 (2023): 80. http://dx.doi.org/10.3390/polym16010080.

Testo completo

Abstract (sommario):

The mechanical properties for paper sheets composited with glucose (Glc), methyl cellulose (MC), and carboxymethyl cellulose (CMC) were investigated. The paper composites were prepared by immersing paper sheets in aqueous solutions of these materials and drying at 100 °C for 30 min. The stress–strain curves for these paper composites were measured by a uniaxial tensile apparatus with a stretching speed of 2 mm/min. The breaking stress and strain for untreated paper were 24 MPa and 0.016, respectively. The paper composites demonstrated stress–strain curves similar to the untreated paper; howeve

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Gc, V., R. Joshi, H. Giri, S. Sujakhu, and M. Shah. "Experimental Study of Mechanical Properties of Natural Fiber Polymer Composite." IOP Conference Series: Materials Science and Engineering 1314, no. 1 (2024): 012005. http://dx.doi.org/10.1088/1757-899x/1314/1/012005.

Testo completo

Abstract (sommario):

Abstract Numerous studies and research projects have been conducted to develop natural fiber polymer composites. The researcher and engineers develop a composite by reinforcing natural fiber with a polymer that exhibits the desired mechanical properties. The experiment determines the composite’s mechanical properties, such as tensile, compression, flexural, and impact strength. This paper presents the experimental study of the natural fiber-reinforced composite, where hemp and jute fibers were reinforced with epoxy polymer as the test specimens for the experiment. The primary approach involved

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Vedanarayanan, V., B. S. Praveen Kumar, M. S. Karuna, et al. "Experimental Investigation on Mechanical Behaviour of Kevlar and Ramie Fibre Reinforced Epoxy Composites." Journal of Nanomaterials 2022 (February 2, 2022): 1–10. http://dx.doi.org/10.1155/2022/8802222.

Testo completo

Abstract (sommario):

Natural fibre composites have been replacing synthetic fibre composites in practical applications for the last several years because of the features such as low densities, low weight, relatively inexpensive, recyclability, and excellent mechanical qualities unique to the substance. Thus, the current study examines how Kevlar/Ramie/Nano SiC hybrid fibre reinforced composites are made and their mechanical properties, and it compares them to those made using a single natural fibre reinforced composite. It was found that natural fibre composite densities and hardness were all within acceptable ran

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Kala, Shiva Kumar, and Chennakesava Reddy Alavala. "Enhancement of Mechanical and Wear Behavior of ABS/Teflon Composites." Trends in Sciences 19, no. 9 (2022): 3670. http://dx.doi.org/10.48048/tis.2022.3670.

Testo completo

Abstract (sommario):

In the present investigations, Most of the engineering applications of metallic materials are replaced by polymeric based composite materials. Because of the low cost and accessible handling of polymer composite materials such as Acrylonitrile butadiene styrene (ABS) matrix materials are used to make the composites with additions of filler enhance the properties of the matrix materials. In the present study, ABS matrix material is used to make the composite materials by adding the Teflon materials. Investigations are carried out to find the enhancement of the composites' mechanical properties.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Skaria, Sunny, and Kenneth J. Berk. "Experimental Dental Composites Containing a Novel Methacrylate-Functionalized Calcium Phosphate Component: Evaluation of Bioactivity and Physical Properties." Polymers 13, no. 13 (2021): 2095. http://dx.doi.org/10.3390/polym13132095.

Testo completo

Abstract (sommario):

The aim of this study was to synthesize and characterize a novel methacrylate-functionalized calcium phosphate (MCP) to be used as a bioactive compound for innovative dental composites. The characterization was accomplished by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The incorporation of MCP as a bioactive filler in esthetic dental composite formulations and the ability of MCP containing dental composites to promote the precipitation of hydroxyapatite (HAp) on the surfaces of t

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Gopalan, Venkatachalam, Mugatha Surya Vardhan, Vishal Thakur, et al. "Studies on Numerical Buckling Analysis of Cellulose Microfibrils Reinforced Polymer Composites." Materials 16, no. 3 (2023): 894. http://dx.doi.org/10.3390/ma16030894.

Testo completo

Abstract (sommario):

Scientists are drawn to the new green composites because they may demonstrate qualities that are comparable to those of composites made of synthetic fibers due to concerns about environmental contamination. In this work, the potential for using the produced green composite in different buckling load-bearing structural applications is explored. The work on composite buckling characteristics is vital because one needs to know the composite’s structural stability since buckling leads to structural instability. The buckling properties of composite specimens with epoxy as the matrix and chemically

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Sari, Nasmi Herlina, Suteja Suteja, and Yusuf Akhyar Sutaryono. "The Mechanical Properties of a Water Hyacinth/Rice Husk Powders Composite for Tissue Engineering Applications." Journal of Fibers and Polymer Composites 2, no. 2 (2023): 145–56. http://dx.doi.org/10.55043/jfpc.v2i2.123.

Testo completo

Abstract (sommario):

In this study, composites made from water hyacinth powder (WPH) and rice husk powder (RH) were created using the hot press method, and the composites were characterized to determine their suitability for biomedical applications such as tissue engineering. The mixing ratio of WPH/RH was investigated. Fourier transmission infrared spectroscopy (FTIR) revealed the presence of chemical bonds in the composites under investigation. Tensile tests were used to investigate the mechanical properties of the composite, which revealed that adding water WPH to the rice husk composite reduced the composite's

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Prakoso, Medhi Wiratama, Dina Nikmatul Baroroh, and Keagisitswe Setswalo. "Water Absorption Rate of Kenaf Fiber (KF)/ Hydroxiteapatite (HA) in Simulated Sea Water." Mechanics Exploration and Material Innovation 1, no. 1 (2024): 35–41. http://dx.doi.org/10.21776/ub.memi.2024.001.01.5.

Testo completo

Abstract (sommario):

Hydroxiteapatie (HA) as a filler is a mixture that is often added to alloy or composite products. This study investigates the development of polyester composites reinforced with kenaf fiber (KF) and hydroxiteapatite (HA) fillers in order to reduce their environmental impact. The strength, decomposability, and low weight of these composites make them ideal for a wide range of applications due to their exceptional mechanical properties. In addition to tensile and bending tests, water absorption tests, and immersion in seawater simulations, the composites were evaluated under demanding conditions

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Wang, Yuxuan, Min Wang, Weichao Zhang, and Chunxia He. "Performance comparison of different plant fiber/soybean protein adhesive composites." BioResources 12, no. 4 (2017): 8813–26. http://dx.doi.org/10.15376/biores.12.4.8813-8826.

Testo completo

Abstract (sommario):

To compare the properties of different plant fiber/soybean protein adhesive composites, six types of plant fibers (rice straw, wheat straw, peanut straw, rice husk, wheat husk, and peanut shell) were selected as reinforced materials, and soybean protein adhesive was used as the adhesive. Six types of different bio-composites were prepared by the compression molding process. The Fourier transform infrared (FTIR) spectra, mechanical properties, moisture absorption, and thermal stability of the composites were measured. The tensile cross-section microstructure of the composites was examined. Resu

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Composites"

1

Thanomsilp, Chuleeporn. "Toughening composites for liquid composite moulding." Thesis, Queen Mary, University of London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390838.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Mahmoud, Bassam. "Modélisation d'impacts sur des stratifiés composites unidirectionnels et hybrides." Thesis, Toulouse 3, 2017. http://www.theses.fr/2017TOU30212.

Testo completo

Abstract (sommario):

Les structures aéronautiques sont aujourd’hui largement réalisées à partir de matériaux composites, permettant ainsi d’en diminuer la masse. L’impact sur structure composite est une des sources de dommage la plus courante et la plus pénalisante. L’objectif de cette thèse est de développer un modèle prédictif d’impact sur stratifiés unidirectionnels de faible épaisseur afin, dans un premier temps, de mieux comprendre les mécanismes d’endommagement mis en jeu et, dans un deuxième temps, de pouvoir proposer des pistes d’amélioration de la tenue de ces structures. La première étape de ces travaux

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Vogler, Tracy John. "On the failure and post-failure of fiber composites in compression /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Wu, Xiang. "Thermoforming continuous fiber reinforced thermoplastic composites." Diss., Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/9383.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Christen, Jean-Loup. "Acoustic transmission through composite shells with noise treatment : Modelling and sensitivity." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEC028.

Testo completo

Abstract (sommario):

La transmission acoustique de plaques et de coques est un problème présent dans de nombreuses industries, de l'automobile à l'aéronautique en passant par le génie civil. Il s'agit alors, en présence d'une source externe, de limiter le niveau de bruit à l'intérieur d'une cavité enclose par une structure vibrante, qu'il s'agisse d'une voiture, d'un avion ou d'un immeuble.Les matériaux composites sont de plus en plus largement utilisés par toutes les industries du transport, du fait de leur faible masse rapportée à leur grande rigidité. Ces caractéristiques, utiles pour réduire la consommation én

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Hsu, Sheng-yuan. "On the prediction of compressive strength and propagation stress of aligned fiber-matrix composites /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Podnos, Eugene Grigorievich. "Application of fictitious domain method to analysis of composite materials /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Ellerby, Donald Thomas. "Processing and mechanical properties of metal-ceramic composites with controlled microstructure formed by reactive metal penetration /." Thesis, Connect to this title online; UW restricted, 1999. http://hdl.handle.net/1773/10583.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Cheung, Yin Nee. "Investigation of concrete components with a pseudo-ductile layer /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202004%20CHEUNGY.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Palmer, Nathan Reed. "Smart Composites evaluation of embedded sensors in composite materials /." Thesis, Montana State University, 2009. http://etd.lib.montana.edu/etd/2009/palmer/PalmerN0809.pdf.

Testo completo

Abstract (sommario):

As an emerging form of renewable energy, horizontal wind turbines have experienced advancements in improving efficiency and reliability. These advances have pushed the limits of current technology used in wind turbines. Smart blades have been proposed as a method of addressing these limitations. Sensor integration within blade construction is the first step in development of smart blades. Thus, several low cost sensors were chosen, 1 axis strain gages, polyvinylidene fluoride films (PVDF), and single mode fiber optics either coated in acrylate or polyimide. To ensure successful bonding between

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Composites"

1

author, Gupta A. C., ed. Polymer composites. New Academic Science, 2019.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

(Firm), Knovel, ed. Composite materials handbook: Metal matrix composites. U.S. Department of Defense, 2002.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

M, Tarnopolʹskiĭ I͡U. Spatially reinforced composites. Technomic Pub. Co., 1992.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

J, Reinhart Theodore, Dostal Cyril A, and ASM Handbook Committee., eds. Composites. ASM International, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Piggott, Michael R. Load bearing fibre composites. 2nd ed. Kluwer Academic, 2002.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Singh, Vijay Kumar, Nishant Kumar Singh, and Yashvir Singh. Composites. CRC Press, 2024. https://doi.org/10.1201/9781003564355.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

1939-, Vigo Tyrone L., and Kinzig Barbara J, eds. Composite applications: The role of matrix, fiber, and interface. VCH, 1992.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

American Society of Civil Engineers. Materials Engineering Division. Journal of composites for construction. American Society of Civil Engineers, 1997.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

International Conference on Woodfiber-Plastic Composites (8th 2005 Madison, Wis.). Eighth International Conference on Woodfiber-Plastic Composites (and other natural fibers): May 23-25, 2005, Monona Terrace Community & Convention Center, Madison, Wisconsin, USA. Forest Products Society, 2005.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Niska, Kristiina Oksman, and Mohini Sain. Wood-polymer composites. Woodhead Publishing Ltd., 2008.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Composites"

1

Ghosh, Subrata Bandhu, Sanchita Bandyopadhyay-Ghosh, and Mohini Sain. "Composites." In Poly(Lactic Acid). John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470649848.ch18.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Hänninen, Tuomas, Mark Hughes, Erwin Baur, et al. "Composites." In Industrial Applications of Natural Fibres. John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470660324.ch19.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Wesolowski, Robert A., Anthony P. Wesolowski, and Roumiana S. Petrova. "Composites." In The World of Materials. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-17847-5_16.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Eisenbach, Iris. "Composites." In English for Materials Science and Engineering. Vieweg+Teubner, 2011. http://dx.doi.org/10.1007/978-3-8348-9955-2_6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Taylor, John G. "Composites." In Phenolic Resins: A Century of Progress. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-04714-5_12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Tenek, Lazarus Teneketzis, and John Argyris. "Composites." In Solid Mechanics and Its Applications. Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-015-9044-0_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Sprenger, H. J., J. Pötschke, C. Potard, and V. Rogge. "Composites." In Fluid Sciences and Materials Science in Space. Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-46613-7_16.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Sciore, Edward. "Composites." In Java Program Design. Apress, 2018. http://dx.doi.org/10.1007/978-1-4842-4143-1_9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Aakeröy, C. B., N. Azoz, P. D. Calvert, M. Kadim, A. J. McCaffery, and K. R. Seddon. "Composites." In ACS Symposium Series. American Chemical Society, 1991. http://dx.doi.org/10.1021/bk-1991-0455.ch034.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Pero-Sanz Elorz, José Antonio, Daniel Fernández González, and Luis Felipe Verdeja. "Composites." In Structural Materials. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-26161-0_6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Composites"

1

GangaRao, Hota V. S., P. V. Vijay, and Piyush K. Dutta. "Durability of Composites in Infrastructure." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95550.

Testo completo

Abstract (sommario):

Abstract Composites are finding wide range of applications because of excellent mechanical and thermal energy absorption at different temperature levels. However, there may not be any chemical equilibrium under certain extreme temperature fluctuations. Therefore, continuous degradation of physical, mechanical and chemical properties is expected during service life of composites that are used as structural elements. Bringing constructed facilities to safe operating levels involves huge expenditures; for example composite-wrap retrofitting appears to be one of the most attractive solution. Effec

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Ross, G. R., and O. O. Ochoa. "Hygroscopic Response of Hybrid Composites." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95140.

Testo completo

Abstract (sommario):

Abstract In order to assess the suitability of hybrid composite structures for use in offshore environments, a micromechanical analysis of hybrid composites is undertaken. Of particular interest are the combined effects of defects and moisture on the material properties and failure initiation. A representative cell approach utilizing the finite element method is used to study stress distributions within dry and wet hybrid composites and the response of hybrid composites containing debonds to transverse loads. A failure subroutine is incorporated into the finite element analysis to predict fail

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Dinesh, A. "Development of Self-Sensing Cement Composite Using Nanomaterials for Structural Health Monitoring of Concrete Columns – A Comprehensive Review." In Sustainable Materials and Smart Practices. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901953-23.

Testo completo

Abstract (sommario):

Abstract. Due to age, structural deterioration, and other factors, concrete constructions such as beams and columns will inevitably deteriorate. The growth of nanomaterials and recent advances in multidisciplinary research has broadened cement composites' applicability in various fields. A self-sensing cement composite can detect its own deformation, strain, and stress by changing its electrical characteristics, which may be measured with electrical resistivity. Carbon-based nanomaterials, such as carbon fiber, carbon black, and carbon nanotube, have a strong potential to increase cement compo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

ENAB, WALAA, STEVEN KEY, and PHILIP BRADFORD. "EFFECTIVE TRANSVERSE REINFORCEMENT OF UNIDIRECTIONAL THIN PREPREG COMPOSITES USING VERTICALLY ALIGNED CARBON NANOTUBES." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36379.

Testo completo

Abstract (sommario):

In this paper, we investigate the use of vertically aligned carbon nano tubes (VACNTs) in laminated composites across nearby plies for developing advanced composites to improve the transverse mechanical properties of the composite. VACNTs introduced into the interlaminar area by manually printing aligned carbon nanotubes onto the surface of the composite prepreg plies. The transverse tensile test is utilized to determine the improvement in transverse mechanical properties. The results shows that the transverse tensile improved by 31.6 %. This approach demonstrates extremely promising outcomes

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Margraf, Jr., Thomas W., Thomas J. Barnell, Ernie Havens, and Christopher D. Hemmelgarn. "Reflexive composites: self-healing composite structures." In The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, edited by Masayoshi Tomizuka. SPIE, 2008. http://dx.doi.org/10.1117/12.776284.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

FENG, HAOTIAN, SSABARINATHAN P. SUBRAMANIYAN, and PAVANA PRABHAKAR. "DEEP LEARNING FRAMEWORK FOR WOVEN COMPOSITE DESIGN AND OPTIMIZATION." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36415.

Testo completo

Abstract (sommario):

Woven composites are produced by interlacing warp and weft fibers in a pattern or weave style. By changing the pattern or material, the mechanical properties of woven composites can be significantly changed. However, how a woven composite’s architecture (pattern, material) is related to its mechanical properties is still unclear. Thus, in this paper, we utilize Deep Neural Network to explore the relationship between 2D woven composite architectures and their corresponding mechanical properties. We propose Deep Convolutional Neural Network to predict in-plane modulus from a given weave pattern

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Hakansson, M. "Use of Carbon Fibre in High Speed Passenger Ferries." In Marine & Offshore Composites. RINA, 2010. http://dx.doi.org/10.3940/rina.moc10cd.2010.02.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Kennedy, S. J., A. Martino, M. A. Brooking, Y. Heo, M. S. Kim, and H. Ocakli. "Development of Design Equations for Steel Sandwich Panel Construction." In Marine & Offshore Composites. RINA, 2010. http://dx.doi.org/10.3940/rina.moc10cd.2010.06.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Sobey, A. J., J. I. R. Blake, R. A. Shenoi, and A. Waddams. "Concurrent Engineering Principles Applied to Marine Composite Structures for Reduction In Production Costs Through Robust Design." In Marine & Offshore Composites. RINA, 2010. http://dx.doi.org/10.3940/rina.moc10cd.2010.09.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

De Fenzo, A., C. Formicola, V. Antonucci, M. Zarrelli, and M. Giordano. "Effects of Zinc-Based Compound on Degradation Behaviour and Smoke Production of Epoxy Matrix." In Marine & Offshore Composites. RINA, 2010. http://dx.doi.org/10.3940/rina.moc10cd.2010.05.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Composites"

1

McCullough, Roy L., and Diane S. Kukich. Composites 2000: An International Symposium on Composite Materials. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada384778.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Suman, Guddi, Aspen Reyes, Claire Jolowsky, et al. Multifunctional Composite LDRD: Radiation Effect on CeO2 -HDPE Composites. Office of Scientific and Technical Information (OSTI), 2024. https://doi.org/10.2172/2480117.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Barnes, Eftihia, Jennifer Jefcoat, Erik Alberts, et al. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42132.

Testo completo

Abstract (sommario):

The properties of composite materials are strongly influenced by both the physical and chemical properties of their individual constituents, as well as the interactions between them. For nanocomposites, the incorporation of nano-sized dopants inside a host material matrix can lead to significant improvements in mechanical strength, toughness, thermal or electrical conductivity, etc. In this work, the effect of cellulose nanofibrils on the structure and mechanical properties of cellulose nanofibril poly(vinylidene fluoride) (PVDF) composite films was investigated. Cellulose is one of the most a

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Keijsers, E. R. P. Bamboo composites. Wageningen Food & Biobased Research, 2020. http://dx.doi.org/10.18174/530197.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Nemat-Nasser, Sia. Healable Composites. Defense Technical Information Center, 2012. http://dx.doi.org/10.21236/ada577758.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Covavisaruch, Sirijutaratana. Comparison of mechanical behaviors of microwave and thermal cured on SiC whisker-filled polybenzoxazine. Chulalongkorn University, 2006. https://doi.org/10.58837/chula.res.2006.76.

Testo completo

Abstract (sommario):

To investigate the effect of microwave cure and thermal cure in silicon carbide whisker (SiCw) filled in polybenzoxazine (PBZ) composite on its corresponding thermal and mechanical behaviors. SiC whisker is thus, used as a filler of the polybenzoxazine to enhance the microwave absorption capability of the molding compound and to reinforce the material. The experimental results reveal that the benzoxazine resin (BA-a) was hardly cured at a high power of 1 kW for 15 min. However, with a relatively low content at 4% by weight SiCw, the benzoxazine resin was found to be cured relatively well. Ther

Gli stili APA, Harvard, Vancouver, ISO e altri

7

DeTeresa, S. J., S. E. Groves, and R. J. Sanchez. Advanced composites technology. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/2645.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Chattopadhyay, Aditi. Damage Precursor Detection in Polymer Matrix Composites Using Novel Smart Composite Particles. Defense Technical Information Center, 2016. http://dx.doi.org/10.21236/ad1018261.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Zhu, Y. T., J. A. Valdez, I. J. Beyerlain, et al. Innovative Composites Through Reinforcement Morphology Design - a Bone-Shaped-Short-Fiber Composite. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/763899.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Taya, Minoru, Onur C. Namli, and Tucker Howie. Design of Active Composites. Defense Technical Information Center, 2009. http://dx.doi.org/10.21236/ada502837.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!