Letteratura scientifica selezionata sul tema "Concrete construction Standards Australia"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Concrete construction Standards Australia".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Concrete construction Standards Australia"
Rossi, Laura, Luiz Miranda de Lima, Yubo Sun, Frank Dehn, John Provis, Guang Ye, and Geert De Schutter. "Future perspectives for alkali-activated materials: from existing standards to structural applications." RILEM Technical Letters 7 (January 12, 2023): 159–77. http://dx.doi.org/10.21809/rilemtechlett.2022.160.
Testo completoElbasha, Nuri Mohamed. "LIGHTER HIGH STRENGTH CONCRETE BEAM." Scientific Journal of Applied Sciences of Sabratha University 2, no. 2 (September 27, 2019): 17–26. http://dx.doi.org/10.47891/sabujas.v2i2.17-26.
Testo completoGunasekara, Chamila, Charitha Seneviratne, David W. Law, and Sujeeva Setunge. "Feasibility of Developing Sustainable Concrete Using Environmentally Friendly Coarse Aggregate." Applied Sciences 10, no. 15 (July 28, 2020): 5207. http://dx.doi.org/10.3390/app10155207.
Testo completoShamsaei, Ezzatollah, Owen Bolt, Felipe Basquiroto de Souza, Emad Benhelal, Kwesi Sagoe-Crentsil, and Jay Sanjayan. "Pathways to Commercialisation for Brown Coal Fly Ash-Based Geopolymer Concrete in Australia." Sustainability 13, no. 8 (April 14, 2021): 4350. http://dx.doi.org/10.3390/su13084350.
Testo completoAzman, Mohamed Nor Azhari, Mohd Sanusi S. Ahamad, Taksiah A.Majid, and Mohd Hanizun Hanafi. "Status of Industrialized Building System Manufacturing Plant in Malaysia." Journal of Civil Engineering, Science and Technology 2, no. 2 (December 1, 2011): 8–16. http://dx.doi.org/10.33736/jcest.89.2011.
Testo completoJohn, Keerthana, Mahmud Ashraf, Matthias Weiss, and Riyadh Al-Ameri. "Experimental Investigation of Novel Corrugated Steel Deck under Construction Load for Composite Slim-Flooring." Buildings 10, no. 11 (November 18, 2020): 208. http://dx.doi.org/10.3390/buildings10110208.
Testo completoFatahi, Behzad, and S. Hamid Reza Tabatabaiefar. "Effects of Soil Plasticity on Seismic Performance of Mid-Rise Building Frames Resting on Soft Soils." Advances in Structural Engineering 17, no. 10 (November 2014): 1387–402. http://dx.doi.org/10.1260/1369-4332.17.10.1387.
Testo completoWong, Koon Wan, and Vanissorn Vimonsatit. "Determination of Shear Capacity for Load Rating of Concrete Bridges to AS 5100.7-2017." Infrastructures 7, no. 11 (November 17, 2022): 156. http://dx.doi.org/10.3390/infrastructures7110156.
Testo completoGaurkar, Prachi P., and Amey Khedikar. "Comparison of Various Codes of Fire on Structural Design." International Journal for Research in Applied Science and Engineering Technology 10, no. 6 (June 30, 2022): 490–504. http://dx.doi.org/10.22214/ijraset.2022.43781.
Testo completoHedulian, S. I., O. A. Gara, and S. V. Savchenko. "COMPARATIVE ANALYSIS OF THE USE OF EXPANSION AGENTS IN REPAIR SOLUTIONS OF DRY BUILDING MIXTURES FOR IMPROVING HARDENING CONDITIONS." Modern construction and architecture, no. 1 (September 29, 2022): 55–62. http://dx.doi.org/10.31650/2786-6696-2022-1-55-62.
Testo completoTesi sul tema "Concrete construction Standards Australia"
Gravina, Rebecca Jane. "Non-linear overload behaviour and ductility of reinforced concrete flexural members containing 500MPa grade steel reinforcement." Title page, contents and abstract only, 2002. http://web4.library.adelaide.edu.au/theses/09PH/09phg777.pdf.
Testo completoKenyon, Jonn Mark. "Non-linear analysis of reinforced concrete plane frames /." Title page, table of contents and abstract only, 1993. http://web4.library.adelaide.edu.au/theses/09PH/09phk368.pdf.
Testo completoSamman, Tamim Abdulhadi. "Indeterminate reinforced concrete frames subjected to inelastic cyclic deformation." Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184307.
Testo completoMcLeod, Christina Helen. "Investigation into cracking in reinforced concrete water-retaining structures." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80207.
Testo completoWallace, Gabrielle, and not supplied. "Microeconomic reform of the building and development process: the development and outcomes of building regulation reform in Australia 1990-2003." RMIT University. Social Science and Planning, 2006. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20070205.123414.
Testo completoBatmunkh, Narantuya. "Engineering characteristics of construction waste for Western Australian road and highway materials." Thesis, Curtin University, 2011. http://hdl.handle.net/20.500.11937/1839.
Testo completoEriksson, Malin. "Life Cycle Assessment of Civil Engineering Works : And Application of European Standards on the Mälar Project." Thesis, KTH, Materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254779.
Testo completoMenchel, Kfir. "Progressive collapse: comparison of main standards, formulation and validation of new computational procedures." Doctoral thesis, Universite Libre de Bruxelles, 2008. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/210452.
Testo completoMagalhães, Carlos Wagne Ferreira de Souza. "Análise comparativa do custo da estrutura de edifícios de concreto armado quando projetados pela NBR-6118:2003 e NBR-6118:1978." Universidade Católica de Pernambuco, 2006. http://www.unicap.br/tede//tde_busca/arquivo.php?codArquivo=34.
Testo completoGravina, Rebecca Jane. "Non-linear overload behaviour and ductility of reinforced concrete flexural members containing 500MPa grade steel reinforcement / by Rebecca Jane Gravina." Thesis, 2002. http://hdl.handle.net/2440/21791.
Testo completoLibri sul tema "Concrete construction Standards Australia"
Loo, Yew-Chaye. Reinforced and prestressed concrete: Analysis and design with emphasis on application of AS3600-2009. Port Melbourne, Vic: Cambridge University Press, 2010.
Cerca il testo completoVance, Mary A. Concrete construction standards. Monticello, Ill: Vance Bibliographies, 1985.
Cerca il testo completoRanzi, Gianluca, ed. Time-dependent behaviour and design of composite steel-concrete structures. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/sed018.
Testo completoAssociation, Canadian Standards. Precast concrete: Materials and construction. Rexdale, Ont: Canadian Standards Association, 1994.
Cerca il testo completoAssociation, Canadian Standards. Concrete materials and methods of concrete construction: Methods of test for concrete. Rexdale, Ont: Canadian Standards Association, 1994.
Cerca il testo completoDarvall, P. Le P. Reinforced and prestressed concrete. South Melbourne: Macmillan Australia, 1989.
Cerca il testo completoAmerican Society for Testing and Materials. ASTM standards in ACI 318. Farmington Hills, MI: American Concrete Institute, 2002.
Cerca il testo completoIreland, National Standards Authority of. Eurocode 2: Design of concrete structures. Dublin: Eolas, 1992.
Cerca il testo completoAmerican Society for Testing and Materials. ASTM standards in ACI 301 and 318. Farmington Hills, MI: American Concrete Institute, 1996.
Cerca il testo completoAmerican Society for Testing and Materials. ASTM standards in ACI 301 and 318. Farmington Hills, MI: American Concrete Institute, 2000.
Cerca il testo completoCapitoli di libri sul tema "Concrete construction Standards Australia"
Tam, Vivian W. Y., Khoa N. Le, and Cuong N. N. Tran. "Optimizing Life-Cycle Carbon Emissions for Achieving Concrete Credits in Australia." In Proceedings of the 21st International Symposium on Advancement of Construction Management and Real Estate, 1077–87. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6190-5_95.
Testo completoStidwell, Samuel, and Eric L. Kreiger. "Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen Orientation." In Standards Development for Cement and Concrete for Use in Additive Construction, 55–74. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200091.
Testo completoDiggs-McGee, Brandy N., and Eric L. Kreiger. "Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction." In Standards Development for Cement and Concrete for Use in Additive Construction, 117–43. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200105.
Testo completoKilic, Ugur, Yang Yang, Ji Ma, and Osman E. Ozbulut. "Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly Ash Cenospheres." In Standards Development for Cement and Concrete for Use in Additive Construction, 75–98. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200087.
Testo completoNair, Sooraj A. O., Anling Li, Barzin Mobasher, and Narayanan Neithalath. "Effect of Layer Height on Tensile Stress Distribution and Crack Width-and-Propagation in 3D Printed Fiber-Reinforced Flexural Elements." In Standards Development for Cement and Concrete for Use in Additive Construction, 13–26. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200114.
Testo completoVerian, Kho P., Jarron Ashcroft, Jim Ziemlaski, Tim Brodesser, Jonathan Ladouceur, Matthew D. Carli, Randall P. Bright, and Eerik Maandi. "The Assessment of the Buildability and Interlayer Adhesion Strength of 3D-Printed Mortar." In Standards Development for Cement and Concrete for Use in Additive Construction, 99–116. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200085.
Testo completoPierson, Matthew C., and Luke R. Pinkerton. "Direct Tension Testing of Plain and Fiber Reinforced Concrete for Use in Additive Construction." In Standards Development for Cement and Concrete for Use in Additive Construction, 35–54. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200086.
Testo completoWeger, Daniel, Thorsten Stengel, Christoph Gehlen, Yannick Maciejewski, and Fabian Meyer-Brötz. "Approval for the Construction of the First 3D Printed Detached House in Germany—Significance of Large Scale Element Testing." In Standards Development for Cement and Concrete for Use in Additive Construction, 144–69. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200119.
Testo completoKompella, Sriram K., Francesco Lo Monte, Marco Cucchi, Andrea Marcucci, Andrea Bassani, Stefano Guanziroli, and Liberato Ferrara. "A Methodology to Assess Early Age Fracture Performance of 3D Printable Cementitious Mixes." In Standards Development for Cement and Concrete for Use in Additive Construction, 27–34. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200093.
Testo completoMoini, Reza, Jan Olek, Pablo D. Zavattieri, and Jeffrey P. Youngblood. "Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle." In Standards Development for Cement and Concrete for Use in Additive Construction, 1–12. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp163620200089.
Testo completoAtti di convegni sul tema "Concrete construction Standards Australia"
Solis-Navarro, Carlos, and Anna-Carin Brink. "Widening jointed reinforced concrete pavements on the Easing Sydney’s Congestion Program." In 12th International Conference on Concrete Pavements. International Society for Concrete Pavements, 2021. http://dx.doi.org/10.33593/y0qxjehe.
Testo completoUy, Brian. "Applications, behaviour and construction of high performance steels in steel-concrete composite structures." In 12th international conference on ‘Advances in Steel-Concrete Composite Structures’ - ASCCS 2018. Valencia: Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/asccs2018.2018.8375.
Testo completoStark, Jan W. B. "European Standards for Composite Construction." In Composite Construction in Steel and Concrete IV Conference 2000. Reston, VA: American Society of Civil Engineers, 2002. http://dx.doi.org/10.1061/40616(281)72.
Testo completoHill, A. B., and B. F. Ronalds. "Optimised Float-out of Concrete Offshore Platforms Towards Increasing Construction Potential in Australia." In SPE Asia Pacific Oil and Gas Conference and Exhibition. Society of Petroleum Engineers, 1998. http://dx.doi.org/10.2118/50144-ms.
Testo completoHodgkinson, John. "Industry Training for Concrete Paving Crews in Australia (2006-2020): The “Grey Card” Course." In 12th International Conference on Concrete Pavements. International Society for Concrete Pavements, 2021. http://dx.doi.org/10.33593/zi0gjbke.
Testo completo""Seventy-Year History of Wire-Wrapped Prestressed Concrete Tanks: Practice, Performance And Professional Standards"." In SP-285: Concrete Construction and Structural Evaluation: A Symposium Honoring Dov Kaminetzky. American Concrete Institute, 2012. http://dx.doi.org/10.14359/51683936.
Testo completoMoss, Justin, and Nicole Liang. "A Contemporary Comparison of Life Cycle Evaluations of Road Pavements in Australia-Asphaltic Concrete vs Portland Cement Concrete." In 12th International Conference on Concrete Pavements. International Society for Concrete Pavements, 2021. http://dx.doi.org/10.33593/qyk86wg1.
Testo completoMarfella, Giorgio. "Seeds of Concrete Progress: Grain Elevators and Technology Transfer between America and Australia." In The 38th Annual Conference of the Society of Architectural Historians Australia and New Zealand. online: SAHANZ, 2022. http://dx.doi.org/10.55939/a4000pi5hk.
Testo completoПулатова, Д. "MAIN CHARACTERISTICS OF CELLULAR CONCRETE." In Status and development trends of standardization and technical regulation in the world. Tashkent state technical university, 2022. http://dx.doi.org/10.51346/tstu-conf.22.1-77-0008.
Testo completoMcManus, Adam, Daniel Tofful, and Rafal Wozniak. "Design of segmental box girder bridges with match cast dry joints in Melbourne, Australia." In IABSE Congress, Christchurch 2021: Resilient technologies for sustainable infrastructure. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/christchurch.2021.0269.
Testo completo