Bibliografie tematiche / Controlling and measuring device

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Controlling and measuring device"

Autore: Grafiati
Pubblicato: 28 maggio 2022
Ultima modifica: 30 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Controlling and measuring device".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Controlling and measuring device"

1

Lübke, K., C. Pieper, G. Goch, and K. Kammers. "Design of a Universal Software System for Controlling Geometric Measuring Devices." Journal of Computing and Information Science in Engineering 7, no. 1 (2006): 108–11. http://dx.doi.org/10.1115/1.2410026.

Testo completo
Abstract (sommario):
The research project UP-Prosa, a German acronym for universal and unified platform for planning, programming, controlling and evaluating processes, of measuring, aims at realizing a platform to design and control processes of geometry measurements, which supports a broad variety of measuring devices via one user interface. Based on Windows Operating System (OS) a software was developed able to control inspection devices for different types of geometry measurements (coordinate measuring machine, form, roughness, gear) and manufacturers by one defined communication protocol. This uniform user in
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Skorokhodov, Dmitriy M., Konstantin A. Krasnyashchikh, and Aleksey S. Sviridov. "Use of contactless methods and means for checking the quality of agricultural machinery spare parts." Tekhnicheskiy servis mashin, no. 2 (June 10, 2020): 141–48. http://dx.doi.org/10.22314/2618-8287-2020-58-2-141-148.

Testo completo
Abstract (sommario):
Quality control of spare parts of agricultural machinery has now acquired significant relevance, which is due to the presence of a large share of low-quality products on the market. The use of low-quality spare parts increases the risk of failure of the equipment in use, which lead to its downtime and financial losses of the agricultural producer, which is highly undesirable in the modern realities of the domestic agricultural industry. Contactless methods and tools for quality control of spare parts will improve the accuracy and productivity of control. (Research purpose) The research purpose
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Kolomiitsev, Oleksii, Volodymyr Komarov, Oleh Dmitriiev, Volodymyr Pustovarov, and Ruslan Oliinyk. "Method for controlling the frequency of eigentones for determination of the astronaut's body weight and small weight in weightlessness." Advanced Information Systems 6, no. 2 (2022): 74–81. http://dx.doi.org/10.20998/2522-9052.2022.2.12.

Testo completo
Abstract (sommario):
In the article the analysis of existent basic methods of determining the weight of body of cosmonauts and objects small weight is conducted in the conditions of weightlessness, and their features of application are similarly exposed. The most comfortable and perspective method of determining the inertial weight of body in the conditions of weightlessness the use of different sort of oscillators and devices, that allow to measure the parameters of body of cosmonaut (small weight of devices and others like that), that hesitates, is considered. It is possible to use dependence of period of vibrat
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Pererva, Viktor, Olexandr Petrenko, and Oleksandr Aleksieienko. "DEVELOPMENT OF THE DEVICE FOR CONTROLLING AND MEASURING THE SUPPLY OF WORKING GAS FOR LABORATORY TESTING OF THE ELECTRIC PROPULSION THRUSTERS." Journal of Rocket-Space Technology 33, no. 4 (2024): 11–21. http://dx.doi.org/10.15421/452402.

Testo completo
Abstract (sommario):
The object of the research is a device for measuring, controlling, and indicating the flow rate of working gas during laboratory testing of electric propulsion systems for space applications. The problem lies in the need to ensure high accuracy in controlling and measuring the flow rates of working gas for such devices. The obtained results include: analysis of existing industrial flow meters that could be used in development; proposed structural and functional diagrams of the device; experimental investigations into the accuracy of the developed device. Based on the analysis of parameters of
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Huang, Hong Bing, Yong Ming Wang, and Ying Qiu Sun. "Design on the Bearing Forging Spray Cooling Control Device." Applied Mechanics and Materials 300-301 (February 2013): 1467–70. http://dx.doi.org/10.4028/www.scientific.net/amm.300-301.1467.

Testo completo
Abstract (sommario):
At present the spray cooling method is used to the high carbon chrome bearing steel in the forging process. The traditional manual method of spray cooling controlling easily cause the slow cooling speed and uneven. Especially above 850 degrees Celsius, it is possible to produce reticular carbide which affects the bearing service life. According to the shortage of the existing technology, the paper design a kind of bearing forging controlled cooling device which can accurately control the spray cooling mainly consisted of delivery area, spray area, soak area and measuring temperature area. This
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Ma, Ru Hong, You Hua Ge, and Fu Yuan Wang. "Development of the Online Detection Controlling System on Stagnant Force of Car Seat Slideway." Applied Mechanics and Materials 43 (December 2010): 321–24. http://dx.doi.org/10.4028/www.scientific.net/amm.43.321.

Testo completo
Abstract (sommario):
An automatic detection device was developed to measure the frictional resistance force between the tracks on the brackets of car seats. The device adopted the force sensor to measure the action force of the tracks on line. The industrial computer was responsible for processing the data, dynamically drawing the value curve of the meter, collecting the order from the SCM and sending the controlling signal to the SCM. The applications show that the measuring system has the good dynamic performance, high measuring accuracy and reliability.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Varekhov, A. G., V. O. Smirnova, O. V. Smirnov, and S. V. Vorobjeva. "CONTROL OF HIGH-OCTANE FUEL AND COMPOSITION OF SOME ELECTROTREATED SOLUTIONS." Oil and Gas Studies, no. 1 (March 1, 2018): 119–21. http://dx.doi.org/10.31660/0445-0108-2018-1-119-121.

Testo completo
Abstract (sommario):
The article deals with an analysis of non-motor methods for measuring the octane number of gasoline. The authors report a device for measuring the octane number and the results of controlling the composition of the effluents of production.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Wei, Li Feng, Yu Wang, Xiao Mei Liu, and An Song Feng. "The Design of Embedded Apparatus Based on Time-Triggered Scheduling Method." Advanced Materials Research 433-440 (January 2012): 5692–97. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.5692.

Testo completo
Abstract (sommario):
A device of petroleum asphalt’s characteristics measuring system was designed in this study. The differential auto-calibration voltage-frequency conversion technology with multi-benchmark resources was applied to measure the temperature. Time-triggered scheduling method was introduced into software design. The intelligent PID algorithm was used for controlling the change rate of temperature. These experiment results showed that the device had high measuring accuracy, and reliability and stability.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

CHYHIN, Vasyl, Mykhailo PAZYNIUK, Olha TERENDII, and Oleksii MENSHIKOV. "CONTROLLING THE OPERATION OF THE REMOTE DEVICE USING FLASK PYTHON SERVER." Herald of Khmelnytskyi National University. Technical sciences 317, no. 1 (2023): 214–19. http://dx.doi.org/10.31891/2307-5732-2023-317-1-214-219.

Testo completo
Abstract (sommario):
A computer model of controlling an unmanned aerial vehicle (UAV) using remote cloud technologies according to predetermined scenarios from the user’s desktop was studied. For this, an experimental setup was created, which includes an unmanned aerial vehicle of the quadcopter type, a personal computer with the Windows operating system, a Raspberry Pi 3 on-board computer with the Raspbian Linux operating system, a Pi Camera V2 video camera, and a Pixhawk autopilot. Worked out connection sequence between client (web browser user) and server (Raspberry Pi 3 with Flask system) and execution of remo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Li, Yiqing, Shoupeng Wei, and Tengfei Zheng. "Measurement of the Thermal Effect of Standing Surface Acoustic Waves in Microchannel by Fluoresence Intensity." Micromachines 12, no. 8 (2021): 934. http://dx.doi.org/10.3390/mi12080934.

Testo completo
Abstract (sommario):
Temperature is an important parameter for many medical and biological applications. It is key to measuring the temperature of acoustofluidics devices for controlling the device’s temperature. In this paper, Rhodamine B was used to measure the temperature change of the microchannel induced by the SSAWs’ thermal effect in microfluidics. A thermocouple was integrated into the microfluidics device to calibrate the relationship between the fluorescent intensity ratios of Rhodamine B and the temperature. Then, the fluid temperature in the microchannel heated by the SSAWs was measured by the fluoresc
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Controlling and measuring device"

1

Дмитренко, Н. Р. "Удосконалення технологічного процесу виготовлення корпусу верхнього 317-110.04.050.001 компресора 2ГМ2,5-2200/20-55 шляхом структурно-параметричної оптимізації операції технічного контролю". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81971.

Testo completo
Abstract (sommario):
Кваліфікаційна робота магістра становить 103 сторінки, у тому числі 39 рисунків, 24 таблиць, бібліографію із 49 джерел на чотирьох сторінках, п’яти додатків на 14 сторінках. Мета роботи. Метою роботи є удосконалення технологічного процесу виготовлення корпусу верхнього 317-110.04.050.001 компресора 2ГМ2,5-2200/20-55 шляхом структурно-параметричної оптимізації операції технічного контролю. Актуальність теми. Деталь "Корпус верхній" є частиною вузла клапана III ступеню, що входить до складу поршневого компресора 2ГМ2,5- 2200/20-55. Актуальною задачею є підвищення ефективності технологічних пр
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Голуб, С. В. "Удосконалення технологічного процесу виготовлення гільзи циліндра 75.11.1002021-11 шляхом інтенсифікації операції контролю радіального биття". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81362.

Testo completo
Abstract (sommario):
Робота магістра становить 76 сторінок, 18 таблиць, 19рисунків, п’ять додатків , бібліографії з 30 джерел на трьох сторінках. Мета роботи. Удосконалення технологічного процессу виготовлення гільзи циліндра 75.11.1002021-11 шляхом інтенсифікації операції контролю радіального биття. Для досягнення мети в робоі було поставлено та вирішено такі завдання: 1) виконати аналіз типового технологічного процессу виготовлення гільзи циліндра; 2)удосконалити технологічний процесс; 3) спроектувати контрольно вимірювальний пристрій для контролю радіального биття; 4) провести модальний аналіз частот власних
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Stark, David. "Controlling computer applications using an eye tracking device /." Leeds : University of Leeds, School of Computer Studies, 2008. http://www.comp.leeds.ac.uk/fyproj/reports/0708/Stark.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

THIBBLIN, CECILIA. "Managing a business change : framework for measuring and controlling businesses." Thesis, KTH, Entreprenörskap och Innovation, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-147787.

Testo completo
Abstract (sommario):
Todays changing market makes it increasingly important for companies to be able to change and adopt to different market dynamics. Companies that manage to undergo a change often differ from those that fail. Key performance indicators is a tool that enables companies to measure where they stand in relation to other companies, but also to know where they want and where they´re going. Looking at change as inevitable, it´s becoming more common for companies to take outside help from companies who are experts when it comes to change. Studies also shows that a trend shift has taken place the last 15
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Gallego, López Rodrigo. "Device-independent information protocols: measuring dimensionality, randomness and nonlocality." Doctoral thesis, Universitat Politècnica de Catalunya, 2013. http://hdl.handle.net/10803/108178.

Testo completo
Abstract (sommario):
The device-independent formalism is a set of tools to analyze experimental data and infer properties about systems, while avoiding almost any assumption about the functioning of devices. It has found applications both in fundamental and applied physics: some examples are the characterization of quantum nonlocality and information protocols for secure cryptography or randomness generation. This thesis contains novel results on these topics and also new applications such as deviceindependent test for dimensionality. After an introduction to the field, the thesis is divided in four parts. In
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Guo, Quan. "Microfluidic device for measuring the deformability of single cells." Thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/42096.

Testo completo
Abstract (sommario):
The deformability of single cells can be used as a biomarker to evaluate the status of many diseases including cancer, malaria, and arthritis. Traditional techniques for measuring single cell deformability, such as micropipette aspiration, optical tweezers, and atomic force microscopy, involve delicate experiments performed by highly-skilled technicians using specialized equipment. This thesis presents a new mechanism for measuring the deformability of single cell using the pressure required to deform single cells through a micro-scale constriction. This technique is in principle similar to th
Gli stili APA, Harvard, Vancouver, ISO e altri
7

O'Shea, Patrick. "Simple and compact device for measuring ultrashort-laser pulses." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/30498.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Rekemeyer, Paul Harlan. "Nanostructured photovoltaics : improving device efficiency and measuring carrier transport." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/108841.

Testo completo
Abstract (sommario):
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2017.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 153-163).<br>Photovoltaics (PV) offer a promising route to combat climate change. However, the growth rate of the dominant commercial photovoltaic (PV) technology is limited by large capital expenditure requirements. This motivates fun
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Sato, Kimitake, George K. Beckham, Kevin Carroll, Caleb Bazyler, Zhanxin Sha, and Greg Haff. "Validity of Wireless Device Measuring Velocity of Resistance Exercises." Digital Commons @ East Tennessee State University, 2015. https://dc.etsu.edu/etsu-works/3782.

Testo completo
Abstract (sommario):
Objectives: The purpose of the study was to identify the level of accuracy in velocity measurement from a newly developed inertia sensor.Design and Methods: Five subjects performed two dumbbell exercises for total of four sets of ten repetitions with a light intensity. Velocity data were taken and considered for analysis from two devices; the inertia sensor, wirelessly connected via Bluetooth™ to a smartphone, and a motion capture system. Both data were taken at the sampling frequency of 200 Hz. Identical data sets of peak and average velocity were analyzed with Pearson product-moment zero-ord
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Waleed, Mohammed Mousa, and О. І. Скляр. "Device for control human reaction." Thesis, ХНУРЕ, 2019. http://openarchive.nure.ua/handle/document/8376.

Testo completo
Abstract (sommario):
Some occupations have enough high requirements to the human reaction at different stimulus for example at the appearance of the light. In this case it should know the reaction time. This report describes the principles creation the device for measuring the reaction time
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Controlling and measuring device"

1

Gramatte, W. Device for measuring and controlling the energy consumption of heating installations. Commission ofthe European Communities, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Lindgreen, Adam, Christine Vallaster, Shumaila Yousafzai, and Bernhard Hirsch, eds. Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

V, Mann Steven, and Choudhry Moorad, eds. Measuring and controlling interest rate and credit risk. 2nd ed. Wiley, 2003.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Sullins, Monty. Observations of a gas exploding device for controlling burrowing rodents. Montana Dept. of Agriculture, Agricultural and Biological Sciences Division, Technical Services Bureau, 1991.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Office, Home. Road traffic: The light beam speed measuring device approval 1993. HMSO, 1993.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Mullin, Roddy. Value for money marketing: A guide to measuring marketing performance. Kogan Page, 2001.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

1945-, Sullivan Daniel, and Montana. Environmental Management Division. Technical Services Bureau, eds. Observations of a gas exploding device for controlling black-tailed prairie dogs. Montana Dept. of Agriculture, Environmental Management Division, Technical Services Bureau, 1990.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

District, Nebraska Public Power, Nebraska. Dept. of Economic Development., and Nebraska Technical Assistance Center, eds. Nebraska profit opportunities for manufacturers of scientific, measuring, and controlling instruments. Nebraska Public Power District, Area Development Dept., 1986.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Albert, Horst John, and National Institute of Standards and Technology (U.S.), eds. Distributed testing of a device-level interface specification for a metrology system. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2002.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

John, Horst, and National Institute of Standards and Technology (U.S.), eds. Distributed testing of a device-level interface specification for a metrology system. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2002.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Controlling and measuring device"

1

Horan, Brendan. "Controlling a Mains Device." In Practical Raspberry Pi. Apress, 2013. http://dx.doi.org/10.1007/978-1-4302-4972-6_10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Letmathe, Peter, and Ilja Rabinovitch. "The Responsible Care initiative as an enabler of implementing corporate social responsibility concepts in the chemical industry." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Niehues, Nils, and Andreas Dutzi. "Disclosing the invisible." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Hoos, Florian. "Social entrepreneurship and social impact assessment." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-11.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Zientara, Piotr, and Paulina Bohdanowicz-Godfrey. "Mechanisms and tools for measuring and reporting sustainability in the hotel industry." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Höhnke, Nikolas, and Susanne Homölle. "The growth of social banks." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-13.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Sohn, Matthias, Dominik Fischer, and Werner Sohn. "An experimental study on corporate social responsibility in junior managers’ project choice in an energy-producing company." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-14.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Huber, Robert, Bernhard Hirsch, and Matthias Sohn. "Design options for sustainability-oriented incentive systems." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-15.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Waldkirch, Rüdiger W., and Bernhard Hirsch. "Sustainability reporting." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-16.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Kirchschläger, Peter G., and Michaela M. Schaffhauser-Linzatti. "Sustainability and ethics in financial reporting." In Measuring and Controlling Sustainability. Routledge, 2018. http://dx.doi.org/10.4324/9781315401904-17.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Controlling and measuring device"

1

LeBeau, Stephen, Raymond Decker, Charles Sfeir, and Boyce Collins. "Controlling the Degradation Profile of Mg Biomedical Devices by Alloy Design and Thermomechanical Processing." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09395.

Testo completo
Abstract (sommario):
Abstract Magnesium (Mg) alloys are gaining interest for biodegradable medical implant devices due to a good combination of mechanical properties and biocompatibility. Nevertheless, the fast degradation rates of Mg and its biocompatible alloys in the aggressive physiological environment impose limitations on their clinical applications. This necessitates the development of Mg based implants with controlled degradation rates to match the kinetics of the bone and tissue healing process and to avoid any complications or issues that might negatively impact surrounding tissues. The current study pre
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Keddam, Michel, Nicolas Monfort Moros, Bernard Tribollet, and Dominique Festy. "Detection and Mapping of SRB Influenced Corrosion of C-Steel." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02447.

Testo completo
Abstract (sommario):
Abstract Microbiologically Induced Corrosion (MIC) takes place in harbors, nuclear plants, oil industry structures and most production plants. MIC is often observed as a localized corrosion (pits, which can evolve into uniform corrosion. Thus, an electrochemical device devoted to local investigations has been developed with the aim of detecting, localizing and characterizing events induced by a bio-corrosion process to enable factors controlling initiation and stabilization of bio-corrosion to be analyzed more deeply. The mapping technique presented uses two microelectrodes to measure local cu
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Gunin, Pavel M., Sergei S. Donchenko, Denis A. Sokolov, Evgeniy A. Lavrov, and Bella R. Aleckperova. "Laser Interferometric Angle Measuring Device." In 2024 IEEE 25th International Conference of Young Professionals in Electron Devices and Materials (EDM). IEEE, 2024. http://dx.doi.org/10.1109/edm61683.2024.10615219.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Lestari, Wahyu Dwi, Papat Hidayatulloh, Kadek Heri Sanjaya, Artha Ivonita Simbolon, Muslimah Dirayati, and Dika Setiawan. "Simple Microcontroller-Based Walking Speed Measuring Device." In 2024 IEEE International Conference on Smart Mechatronics (ICSMech). IEEE, 2024. https://doi.org/10.1109/icsmech62936.2024.10812304.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Liang, Zhou Gu, Xu Jie, Chen Li, and Wei Jie Ru. "State prediction of centralized protection measuring and controlling device." In 2019 6th International Conference on Information Science and Control Engineering (ICISCE). IEEE, 2019. http://dx.doi.org/10.1109/icisce48695.2019.00183.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Changchun Bao, Chunbao Shen, Shengming Dang, and Haitao Liu. "Design of Automatic Measuring and Controlling Device for the Vegetable Greenhouse." In 2007 IEEE International Conference on Control and Automation. IEEE, 2007. http://dx.doi.org/10.1109/icca.2007.4376794.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Weiss, Paul S. "Measuring and Controlling Molecular-Scale Properties for Molecular Electronics." In 2002 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2002. http://dx.doi.org/10.7567/ssdm.2002.f-1-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Zhao, Fei, Fengyang Shen, Chunliang Wu, Yunyan Liu, and Yu Sun. "The Computer Measuring and Controlling System for the Plugging Meter of the Mobile Sodium Purification Device." In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-15645.

Testo completo
Abstract (sommario):
The plugging meter of mobile sodium purification device is the special equipment for on-line monitoring the plugging temperature, and according to which to calculate oxygen content in the sodium. This paper introduced the working principle of the test sodium loop, plugging meter and the computer measuring and controlling system. The core of the system was a data acquisition card, and using pure PID control algorithm to complete the whole measuring process of the plugging temperature and solving the plugging temperature by curve fitting method. The system could also display in real time the cha
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Osinskiy, V. I., A. A. Voronko, P. A. Merzhvinskiy, K. B. Karpinskiy, and V. M. Glushkov. "A set of measuring devices for installing and controlling fiberoptic paths." In 2003 13th International Crimean Conference 'Microwave and Telecommunication Technology' Conference Proceedings. IEEE, 2003. http://dx.doi.org/10.1109/crmico.2003.158976.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Weiss, Paul S. "Designing, measuring, and controlling molecular- and supramolecular-scale properties for molecular devices." In 2010 IEEE 3rd International Nanoelectronics Conference (INEC). IEEE, 2010. http://dx.doi.org/10.1109/inec.2010.5424442.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Controlling and measuring device"

1

Doyle, Barney Lee, Paolo Rossi, Marcelino G. Armendariz, John Patrick Sullivan, Robert J. Foltynowicz, and Fred J. Zutavern. A low power ultra-fast current transient measuring device. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/919652.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Spell, Lindsay. Controlling the Empire: Measuring Ethnic Residential Segregation in London, 2001-2011. Portland State University Library, 2000. http://dx.doi.org/10.15760/etd.1978.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Tella, Rafael Di, and Federico Weinschelbaum. Choosing Agents and Monitoring Consumption: A Note on Wealth as a Corruption-Controlling Device. National Bureau of Economic Research, 2007. http://dx.doi.org/10.3386/w13163.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Estler, W. Tyler. Accuracy analysis of the space shuttle rocket motor profile measuring device. National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4171.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Vangelas, K., W. Warren Hyde, B. Brian02 Looney, K. Kirk Cantrell, and T. Tyler Gilmore. A NEW DEVICE AND METHOD FOR MEASURING VOLATILE COMPOUNDS IN MONITORING WELLS. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/901451.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Sharp, Marilyn A., Joseph M. McGrath, Everett Harman, Joseph J. Knapik, and William A. Sawyer. A Device and Methodology for Measuring Repetitive Lifting VO2max (Oxygen Consumption Rate). Defense Technical Information Center, 1987. http://dx.doi.org/10.21236/ada185195.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Ballard, S., G. T. Barker, and R. L. Nichols. The in situ permeable flow sensor: A device for measuring groundwater flow velocity. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10147883.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Hatfield, Kirk, Michael D. Annable, and P. S. Rao. Demonstration and Validation of a Water and Solute Flux Measuring Device. Protocol Report. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada507200.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Carlson, Thomas J., and Joanne P. Duncan. Evolution of the Sensor Fish Device for Measuring Physical Conditions in Severe Hydraulic Environments. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/878148.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Carlson, Thomas J., and J. P. Duncan. Evolution of the sensor fish device for measuring physical conditions in sever hydraulic environments. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/1218141.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Controlling and measuring device":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia