Accedi

Bibliografie tematiche / Controlling and measuring device / Tesi

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Controlling and measuring device.

Tesi sul tema "Controlling and measuring device"

Autore: Grafiati

Pubblicato: 28 maggio 2022

Ultima modifica: 30 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Controlling and measuring device".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.

1

Дмитренко, Н. Р. "Удосконалення технологічного процесу виготовлення корпусу верхнього 317-110.04.050.001 компресора 2ГМ2,5-2200/20-55 шляхом структурно-параметричної оптимізації операції технічного контролю". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81971.

Testo completo

Abstract (sommario):

Кваліфікаційна робота магістра становить 103 сторінки, у тому числі 39 рисунків, 24 таблиць, бібліографію із 49 джерел на чотирьох сторінках, п’яти додатків на 14 сторінках. Мета роботи. Метою роботи є удосконалення технологічного процесу виготовлення корпусу верхнього 317-110.04.050.001 компресора 2ГМ2,5-2200/20-55 шляхом структурно-параметричної оптимізації операції технічного контролю. Актуальність теми. Деталь "Корпус верхній" є частиною вузла клапана III ступеню, що входить до складу поршневого компресора 2ГМ2,5- 2200/20-55. Актуальною задачею є підвищення ефективності технологічних пр

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Голуб, С. В. "Удосконалення технологічного процесу виготовлення гільзи циліндра 75.11.1002021-11 шляхом інтенсифікації операції контролю радіального биття". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81362.

Testo completo

Abstract (sommario):

Робота магістра становить 76 сторінок, 18 таблиць, 19рисунків, п’ять додатків , бібліографії з 30 джерел на трьох сторінках. Мета роботи. Удосконалення технологічного процессу виготовлення гільзи циліндра 75.11.1002021-11 шляхом інтенсифікації операції контролю радіального биття. Для досягнення мети в робоі було поставлено та вирішено такі завдання: 1) виконати аналіз типового технологічного процессу виготовлення гільзи циліндра; 2)удосконалити технологічний процесс; 3) спроектувати контрольно вимірювальний пристрій для контролю радіального биття; 4) провести модальний аналіз частот власних

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Stark, David. "Controlling computer applications using an eye tracking device /." Leeds : University of Leeds, School of Computer Studies, 2008. http://www.comp.leeds.ac.uk/fyproj/reports/0708/Stark.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

THIBBLIN, CECILIA. "Managing a business change : framework for measuring and controlling businesses." Thesis, KTH, Entreprenörskap och Innovation, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-147787.

Testo completo

Abstract (sommario):

Todays changing market makes it increasingly important for companies to be able to change and adopt to different market dynamics. Companies that manage to undergo a change often differ from those that fail. Key performance indicators is a tool that enables companies to measure where they stand in relation to other companies, but also to know where they want and where they´re going. Looking at change as inevitable, it´s becoming more common for companies to take outside help from companies who are experts when it comes to change. Studies also shows that a trend shift has taken place the last 15

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Gallego, López Rodrigo. "Device-independent information protocols: measuring dimensionality, randomness and nonlocality." Doctoral thesis, Universitat Politècnica de Catalunya, 2013. http://hdl.handle.net/10803/108178.

Testo completo

Abstract (sommario):

The device-independent formalism is a set of tools to analyze experimental data and infer properties about systems, while avoiding almost any assumption about the functioning of devices. It has found applications both in fundamental and applied physics: some examples are the characterization of quantum nonlocality and information protocols for secure cryptography or randomness generation. This thesis contains novel results on these topics and also new applications such as deviceindependent test for dimensionality. After an introduction to the field, the thesis is divided in four parts. In

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Guo, Quan. "Microfluidic device for measuring the deformability of single cells." Thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/42096.

Testo completo

Abstract (sommario):

The deformability of single cells can be used as a biomarker to evaluate the status of many diseases including cancer, malaria, and arthritis. Traditional techniques for measuring single cell deformability, such as micropipette aspiration, optical tweezers, and atomic force microscopy, involve delicate experiments performed by highly-skilled technicians using specialized equipment. This thesis presents a new mechanism for measuring the deformability of single cell using the pressure required to deform single cells through a micro-scale constriction. This technique is in principle similar to th

Gli stili APA, Harvard, Vancouver, ISO e altri

7

O'Shea, Patrick. "Simple and compact device for measuring ultrashort-laser pulses." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/30498.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Rekemeyer, Paul Harlan. "Nanostructured photovoltaics : improving device efficiency and measuring carrier transport." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/108841.

Testo completo

Abstract (sommario):

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2017.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 153-163).<br>Photovoltaics (PV) offer a promising route to combat climate change. However, the growth rate of the dominant commercial photovoltaic (PV) technology is limited by large capital expenditure requirements. This motivates fun

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Sato, Kimitake, George K. Beckham, Kevin Carroll, Caleb Bazyler, Zhanxin Sha, and Greg Haff. "Validity of Wireless Device Measuring Velocity of Resistance Exercises." Digital Commons @ East Tennessee State University, 2015. https://dc.etsu.edu/etsu-works/3782.

Testo completo

Abstract (sommario):

Objectives: The purpose of the study was to identify the level of accuracy in velocity measurement from a newly developed inertia sensor.Design and Methods: Five subjects performed two dumbbell exercises for total of four sets of ten repetitions with a light intensity. Velocity data were taken and considered for analysis from two devices; the inertia sensor, wirelessly connected via Bluetooth™ to a smartphone, and a motion capture system. Both data were taken at the sampling frequency of 200 Hz. Identical data sets of peak and average velocity were analyzed with Pearson product-moment zero-ord

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Waleed, Mohammed Mousa, and О. І. Скляр. "Device for control human reaction." Thesis, ХНУРЕ, 2019. http://openarchive.nure.ua/handle/document/8376.

Testo completo

Abstract (sommario):

Some occupations have enough high requirements to the human reaction at different stimulus for example at the appearance of the light. In this case it should know the reaction time. This report describes the principles creation the device for measuring the reaction time

Gli stili APA, Harvard, Vancouver, ISO e altri

11

Ketteringham, Laurence Paul. "Measuring and Controlling Upper Limb Tremor in Individuals With Multiple Sclerosis." Thesis, University of Bristol, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.520598.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Spell, Lindsay Joella. "Controlling the Empire: Measuring Ethnic Residential Segregation in London, 2001-2011." PDXScholar, 2014. https://pdxscholar.library.pdx.edu/open_access_etds/1978.

Testo completo

Abstract (sommario):

This research presents an overview of ethnic residential segregation in London, England, from 2001 to 2011 using four different methods of measurement. The purpose of the study was to both examine changes in the level of segregation among different ethnic groups between census dates and to compare various methods of measurement. Using the Index of Dissimilarity, Poulsen et al.'s (2001) typology classification and two different local statistics (Getis-Ord G* and Anselin Local Moran's I), the levels of concentration of the five main ethnic minority groups in London were measured for data from th

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Sheerer, Corey D. "A Hand-Held Device for Controlling a Mounted, Motor-Driven Colonoscope." Ohio University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1418983633.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Sederholm, Thomas. "Measuring Lymphedema Symptoms : Continuing the Development of a Medical Device." Thesis, KTH, Maskinkonstruktion (Inst.), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-99286.

Testo completo

Abstract (sommario):

Denna rapport beskriver utvecklandet av ett medicinsktekniskt prototypverktyg för mätning av omkrets- och hårdhets-förändringar i armar och ben, för diagnostisering av lymfödem. Lymfödem är en bieffekt vid cancerbehandling som blir vanligare i och med att cancerbehandling blir allt mer effektiv. Lymfödem visar sig vanligtvis som svullnad av armar eller ben som kan bli bestående om den inte behandlas. Genom att följa omkretsen i armar och ben hos patienter som har strålbehandlats eller opererats för cancer kan en terapeut upptäcka tendenser till svullnad tidigt för att inleda behandling i god t

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Myint, Cho Zin. "A new electronic device for measuring pulse and oxygen concentration." Thesis, Curtin University, 2011. http://hdl.handle.net/20.500.11937/1788.

Testo completo

Abstract (sommario):

Sensor devices such as pulse oximetry are practical tools used by most healthcare professionals, and even patients. An electronic sensor device that has the capability to measure physiological signs of saturation of arterial oxygen (SpO2) and heart beat rate of the human body has been developed in this study.The hardware design of the sensor device consists of a microcontroller PIC18F452, an external flash memory, and a transceiver unit. The most suitable sensors of red and infra red LEDs are installed on the arms of the plastic clip and functioned with the right resistor values. The red and i

Gli stili APA, Harvard, Vancouver, ISO e altri

16

McGowan, Paul Hugh. "Integrated cost and time models for measuring, valuing and controlling construction projects." Thesis, University of Dundee, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282728.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Racke, David. "Measuring and Controlling Energy Level Alignment at Hybrid Organic/Inorganic Semiconductor Interfaces." Diss., The University of Arizona, 2015. http://hdl.handle.net/10150/556212.

Testo completo

Abstract (sommario):

In this dissertation, I present the results of my research regarding hybrid semiconductor interfaces between organic and inorganic semiconductors. Using photoemission spectroscopy, I elucidate the important role of defect-induced electronic states within the inorganic semiconductor phase. These states significantly affect both the energy level alignment and the charge carrier dynamics at the hybrid interface. I demonstrate that the behavior of these hybrid semiconductor interfaces is complex and not well characterized by current models for organic semiconductor interfaces. Specifically, I show

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Wodrich, Timothy Dirk 1962. "A device for controlling the installation rate of subsurface trickle irrigation laterals." Thesis, The University of Arizona, 1990. http://hdl.handle.net/10150/278693.

Testo completo

Abstract (sommario):

A three-point hitch, mounted implement was developed to control the injection rate of trickle irrigation tubing. Power to the implement was supplied by the tractor's electric and hydraulic systems. A doppler radar velocity sensor measured ground speed and provided a signal to a single board computer. The computer generated an output signal which operated a throttling valve that controlled the hydraulic flow to the motor coupled to one of two pulling wheels. The wheels, mounted on parallel shafts with their faces in contact, utilized friction to feed the tubing. An error feedback loop controlle

Gli stili APA, Harvard, Vancouver, ISO e altri

19

Rushton, Christopher Edward. "Measuring and modelling vehicle NOx emissions using a remote sensing device." Thesis, University of Leeds, 2016. http://etheses.whiterose.ac.uk/18000/.

Testo completo

Abstract (sommario):

Despite the increasingly stringent type approval limit values for vehicle emissions no quantitative difference has been seen in roadside concentrations of NOX concentrations (Carslaw et al., 2011b). This thesis aims to improve the ability of measuring and modelling the NOX emissions of passenger cars in urban environments by taking an in depth look at the emissions of vehicles observed in real driving environments over a number of years in Aberdeen, Cambridge, Leeds and Sheffield using a Remote Sensing Device. The remote sensing device is tested under controlled conditions to ascertain its mea

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Nilsson, Tobias. "Construction and development of a multifunctional measuring device for biomedical applications." Thesis, Umeå universitet, Institutionen för fysik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-126023.

Testo completo

Abstract (sommario):

Lab-on-a-chip technology is a rapidly growing research area. Joining together several disciplines, such as physics, biology and several instances of nanotechnologies. The aim of this research is mainly to produce chips that can do the same types of measurements as large lab equipment and measurement systems, but at a fraction of the size and cost. In this work a multifunctional measuring device have been developed. It can measure optical absorbance and fluorescence while performing a range of potentiometric techniques; including chronoamperometry, linear- and cyclic voltammetry. From all these

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Malone, John P. "Measuring the factors controlling the production of nitrogen and nitrous oxide in soils." Thesis, Queen's University Belfast, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361223.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Alam, Mahbub. "Development of a clinical device for measuring rotational laxity of the knee." Thesis, Imperial College London, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.506041.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Brannelly, N. "The development of a point of care device for measuring blood ammonia." Thesis, University of the West of England, Bristol, 2017. http://eprints.uwe.ac.uk/29524/.

Testo completo

Abstract (sommario):

Ammonia is produced in the body during the metabolism of amino acids. In the liver, it is converted to urea via the urea cycle and excreted by the kidneys as urine. Normal levels are between 11 to 50 µM, whereas a blood ammonia level of approximately 100 µM indicates pathology. Elevated blood ammonia is associated with a number of pathological conditions including liver and kidney dysfunction. Conditions such as these can affect brain function and can be fatal. Current blood ammonia analysis requires a laboratory blood test. Few, if any of the techniques used are suitable for point of care (PO

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Hongu, Nobuko, Jamie M. Wise, Barron J. Orr, and Kristin D. Wisneski. "GPS Watches for Measuring Energy Expenditure during Physical Activity." College of Agriculture, University of Arizona (Tucson, AZ), 2014. http://hdl.handle.net/10150/324540.

Testo completo

Abstract (sommario):

Revised; Originally published: 10/2008<br>3 pp.<br>Recently, a number of global positioning system (GPS) devices have been introduced commercially which exploit GPS, transforming frequent measurements of time and location, into an estimate of energy expenditure. This fact sheet reviews how GPS watches (GPS fitness units) measure energy expenditure of individual during physical activity. We list popular GPS watches that are on the market and show pros and cons of these watches. After our field testing, we decided that the Garmin Forerunner 305 is our best pick for the GPS watch. We included inf

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Kunz, Alexander [Verfasser]. "Controlling Charge Carrier Trapping in Polymeric Semiconductors : Connecting Morphology to Device Behavior / Alexander Kunz." Mainz : Universitätsbibliothek der Johannes Gutenberg-Universität Mainz, 2021. http://d-nb.info/1231433507/34.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

Spaven, Guy Philip. "An automatic system for measuring and controlling the defibration process in the manufacturing of hardboard." Thesis, University of Brighton, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.306067.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

27

Zissimos, I. "Design and construction of an acoustic measuring device to investigate automotive tyre noise." Thesis, Cranfield University, 2015. http://dspace.lib.cranfield.ac.uk/handle/1826/10308.

Testo completo

Abstract (sommario):

Tyre noise measuring procedures are used worldwide and covered by appropriate International Standards, but from the literature search and the author's 30 years' expertise in acoustics, it became clear that there are still problems to overcome. The objective of this project is to design and construct a prototype stationary acoustic device that can produce and measure the noise emitted by the grooves and treads of automotive tyres and develop a new acoustic tyre measuring procedure. Through this new procedure, the noise measurement can be performed in a controlled laboratory environment, no expe

Gli stili APA, Harvard, Vancouver, ISO e altri

28

Hongu, Nobuko, Jamie M. Wise, Barron J. Orr, and Kristin D. Wisneski. "GPS Watches for Measuring Energy Expenditure during Physical Activity." College of Agriculture and Life Sciences, University of Arizona (Tucson, AZ), 2008. http://hdl.handle.net/10150/146669.

Testo completo

Abstract (sommario):

4 pp.<br>Recently, a number of global positioning system (GPS) devices have been introduced commercially which exploit GPS, transforming frequent measurements of time and location, into an estimate of energy expenditure. This fact sheet reviews how GPS watches (GPS fitness units) measure energy expenditure of individual during physical activity. We list popular GPS watches that are on the market and showed pros and cons of these watches. After our field testing, we decided that Garmin Forenunner 305 is our best pick for the GPS watch. We included information on Geocashing, which is one of popu

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Huh, Sang Hee. "Time-measuring device : making your own history of remembrance box with childhood's physical growth /." Online version of thesis, 2008. http://hdl.handle.net/1850/7742.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Hammar, Henning, and Daniel Constanda. "Kraftanalys och framtagning av mätanordning för vertikala vindkraftverket Lucias bärarmar." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-159839.

Testo completo

Abstract (sommario):

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 k

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Just, Krzysztof. "Metodology of the design the structure and controlling of the linear mechatronic device : PhD thesis summary." Rozprawa doktorska, [s.n.], 2017. http://dlibra.tu.koszalin.pl/Content/1050.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Fujiwara, Atsushi. "Controlling Adsorption Properties of Metal-Organic Framework Particles through Synthesis Protocols." Doctoral thesis, Kyoto University, 2021. http://hdl.handle.net/2433/263694.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Aoyama, Takahiko, Shuji Koyama, Masatoshi Tsuzaka, and Hisashi Maekoshi. "A depth-dose measuring device using a multichannel scintillating fiber array for electron beam therapy." American Institute of Physics, 1997. http://hdl.handle.net/2237/7086.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Ahmad, Riyaz. "Evaluation and applications of a new measuring device in the measurement of various ocular parameters." Thesis, University of Nottingham, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.387681.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Stevenson, Brian. "The colour measurement of ceramic samples using a commercial colour measuring device and a laboratory spectrophotometer." Thesis, University of Edinburgh, 2009. http://hdl.handle.net/1842/3475.

Testo completo

Abstract (sommario):

The selection of shade for a porcelain crown is a subjective process and mode of fabrication is known to have an effect. This investigation sought to determine the accuracy of a commercially-available shade-matching device (IdentaColor II) when used to measure the colour of proprietary, custom-made all-ceramic and custom-made metal-ceramic samples of shades B1, A3 and D4 under different calibration and lighting conditions as well as over time. The findings from the first part of the study led to an investigation of the influence of fabrication technique on the colour co-ordinates recorded for

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Whitmore, Sigrid Ilona. "Realization of a Measuring Device for Recordning the Relative Movement between Residual Limb and Prosthetic Socket." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/84478.

Testo completo

Abstract (sommario):

Relative motion between residual limb and prosthetic socket is an indication of poor fit. Both the fabrication and fitting processes are highly subjective and a favorable result depends upon the technician's expertise. Although numerous methods exist to measure the relative motion, all have limitations and are not well suited for clinical use. A measurement system using optical sensors has been proposed by students at the Technische Universität Darmstadt and evaluations of a functional model have yielded promising results. In this thesis, the existing functional model is improved and expanded

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Koehler, J. F. "The development of a road profile measuring device with reference to endurance testing of motor vehicles." Master's thesis, University of Cape Town, 1990. http://hdl.handle.net/11427/8379.

Testo completo

Abstract (sommario):

Includes bibliography.<br>This project describes the development of a device to measure the profile of a road. The data describing the roads characteristics are used to compare the qualities of the test tracks at present used by Volkswagen SA (Pty) Ltd for endurance testing of their products, and the Synthetic Road used on their new hydraulic road simulator.

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Olsson, Jakob. "Measuring the Technical and Process Benefits of Test Automation based on Machine Learning in an Embedded Device." Thesis, KTH, Programvaruteknik och datorsystem, SCS, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231785.

Testo completo

Abstract (sommario):

Learning-based testing is a testing paradigm that combines model-based testing with machine learning algorithms to automate the modeling of the SUT, test case generation, test case execution and verdict construction. A tool that implements LBT been developed at the CSC school at KTH called LBTest. LBTest utilizes machine learning algorithms with off-the-shelf equivalence- and model-checkers, and the modeling of user requirements by propositional linear temporal logic. In this study, it is be investigated whether LBT may be suitable for testing a micro bus architecture within an embedded teleco

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Lin, Chun-Sheng, and 林俊昇. "The movable physiological signal measuring device." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/70893288470952855326.

Testo completo

Abstract (sommario):

碩士<br>中原大學<br>生物醫學工程研究所<br>98<br>The objective of the study was to discuss the relationship between embedded measurement of bio-signal and the quality and accuracy of wireless transmitted data. The system was integrated using MSP430F149 to acquire the signals of ECG. The sampling rate of ECG was 200 Hz. The signal was real-time displayed on the TFT LCD of the device. After analog to digital conversion by MSP430F149, the signals could be transmitted real time to the receiving point through the ZigBee wireless transmission system. With user interface created by Boarland C++ Builder at the recei

Gli stili APA, Harvard, Vancouver, ISO e altri

40

Chung, Yi-Chun, and 鍾宜君. "Portable Fitness Low Cost Measuring Device Development." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/22969378913231187289.

Testo completo

Abstract (sommario):

碩士<br>國立臺北教育大學<br>資訊科學系碩士班<br>103<br>Ultrasounds are sound waves with frequencies higher than the upper audible limit of human hearing. Ultrasound is not different from 'normal' (audible) sound in its physical properties, only in that humans cannot hear it. This limit varies from person to person and is approximately 20 kilohertz (20,000 hertz) in healthy, young adults. Ultrasound devices operate with frequencies from 20 kHz up to several gigahertzes. Ultrasound is used in many different fields. Ultrasonic devices are used to detect objects and measure distances. Ultrasound imaging or sonog

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Liao, Jhih-He, and 廖至合. "Design of Wearable Pulse Wave Measuring Device." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/36527751814668158091.

Testo completo

Abstract (sommario):

碩士<br>國立彰化師範大學<br>工業教育與技術學系<br>104<br>Nowadays, the electronic wearable device which provides heart rate measurement service uses an internal photoelectric sensor to measure it. The photoelectric sensor can only measure the arterial oxygen by measuring the amount of reflected light. However, it is not suitable for measure the real pulse wave what we care in eastern medicine. The reason is that the pulse is a kind of pressure wave and the photoelectric sensor is not really deigned for measuring pressure. The doctor puts some pressure on those six acupuncture points when measuring pulse. Then, a

Gli stili APA, Harvard, Vancouver, ISO e altri

42

Wu, Deng-Ke, and 伍登科. "A Wireless Steering Wheel Angle Measuring Device." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/54748233926255907442.

Testo completo

Abstract (sommario):

碩士<br>正修科技大學<br>資訊工程研究所<br>103<br>A wireless steering wheel angle measuring device is used to install the triaxial accelerometers on the automobile steering wheel. After the steering wheel rotate, the triaxial acceleration of the acceleration sensor will changes due to the influence of gravity. The triaxial direction acceleration information can be got by the microprocessor to calculate the automobile steering wheel the rotation angle. The automobile steering wheel angle information will use the wireless transmission to the electronic control unit by the wireless receiving and dispatching elec

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Krishna, Bharadwaj BB. "Controlling Defects in CVD Grown Graphene : Device Application Perspective." Thesis, 2016. http://etd.iisc.ac.in/handle/2005/2868.

Testo completo

Abstract (sommario):

Necessity is the mother of all inventions. With Si hitting the speed bottleneck, newer materials to replace Si are being sought out. The ex-foliation based experiments on graphene by Geim and Novoselov at this point was perfect as many of its physical properties were fascinating from an electronics standpoint and hence it was very soon projected as a Si replacement for logic applications. In addition, graphene is also an attractive alternative to applications such as radio frequency devices, ultra-sensitive mass/chemical sensing, high-speed optoelectronics and transparent conductors for photo-

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Krishna, Bharadwaj BB. "Controlling Defects in CVD Grown Graphene : Device Application Perspective." Thesis, 2016. http://hdl.handle.net/2005/2868.

Testo completo

Abstract (sommario):

Necessity is the mother of all inventions. With Si hitting the speed bottleneck, newer materials to replace Si are being sought out. The ex-foliation based experiments on graphene by Geim and Novoselov at this point was perfect as many of its physical properties were fascinating from an electronics standpoint and hence it was very soon projected as a Si replacement for logic applications. In addition, graphene is also an attractive alternative to applications such as radio frequency devices, ultra-sensitive mass/chemical sensing, high-speed optoelectronics and transparent conductors for photo-

Gli stili APA, Harvard, Vancouver, ISO e altri

45

LIU, SHIH CHI, and 劉士齊. "Optical torque measuring device mechanism design - Raspberry Pi 3 as a measuring platform." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/5xg6zb.

Testo completo

Abstract (sommario):

碩士<br>國立彰化師範大學<br>機電工程學系<br>107<br>This paper aims to study an optical torsion strength measuring device, comprising: a strain body, which is along an axis of the strain body and includes a side plane which is deformed as the external force changes, and the detecting unit utilizes The optical grating combined with the light sensor and the Raspberry Pi 3 constitutes the main sensing platform. The way to measure the deformation of the strained body is to attach the grating piece to the strain body of the object to be tested. When the light source is irradiated onto the optical wall, the detected

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Cheng, Min-Hsien, and 鄭民先. "Design of Water Quality Measuring Device for Aquaculture." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/mp9rvs.

Testo completo

Abstract (sommario):

碩士<br>義守大學<br>電子工程學系<br>105<br>As the global wild fisheries’ stock has seen a decline in recent years, aquaculture is considered to be a way for sustaining these fisheries’ stock. However, it’s difficult to record and automatically control the cultivation parameter well as the water quality in traditional aquaculture is mostly measured in manual. The purpose of this research is to design an instrumentation which can be used to measure and detect the water quality at a fixed position by using the user interface from remote monitoring center. The detection includes DO, pH and water quality. At t

Gli stili APA, Harvard, Vancouver, ISO e altri

47

Yen, Yi-Ming, and 顏逸鳴. "A Device and Method for Measuring the Angle." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/80391656264047797813.

Testo completo

Abstract (sommario):

碩士<br>正修科技大學<br>機電工程研究所<br>92<br>The purpose of this research is to develop the device with a simple mechanism and low cost for measuring the parallel degree of two planes. The method is to combine the patenting design of the “One kind of device for measuring the degree of the parallel between two planes with the same direction of the rotational axis” and the close-formed solution. The angle between two planes can be calculated by providing only two sets of the moved distances. The experiments results are good compared to the values of theory. The device is composed of a lead screw driven by a

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Tsai, Cheng-Hang, and 蔡承桓. "Digital wound area measuring device research and development." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/962t3f.

Testo completo

Abstract (sommario):

碩士<br>國立臺北科技大學<br>製造科技研究所<br>106<br>Human beings have eyes to see things, and the information will be transported to brain for processing then make comment to body for acting. For those things are not having standard scales, there might happens some measuring deviation caused by judgement from different people. For the technology development nowadays, every field have huge image data shot by system, for example: industrial detection, medical images……etc. It will take so many times if we use human eyes and rains to judge these images, but we can save bunch of time by using computer programing a

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Imam, Saima. "Automatic Blood Pressure Measuring Device With GSM Module." Thesis, 2017. http://ethesis.nitrkl.ac.in/8897/1/2017_MT_SImam.pdf.

Testo completo

Abstract (sommario):

Health monitoring on regular basis is important nowadays, but it's not possible to go to hospital for regular check-ups due to our busy life. With a portable BP device which automatically calculates the blood pressure, mean arterial pressure and heart rate, a patient can monitor his/her BP and heart rate himself/herself at home, office or anywhere. If the readings are not normal, the readings can be sent to the hospital or doctor using GSM module. And the patient can be diagnosed if required. This project also intends to help the people of the remote location where medical facilities are not a

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Hsu, Shu-yuan, and 許書元. "Manufacturing and measuring of optically pumped organic polariton device." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/jrb2sy.

Testo completo

Abstract (sommario):

碩士<br>國立中央大學<br>光電科學與工程學系<br>105<br>We use organic dyes DEDOC to be the material of strongly coupling, and spin the high-absorption organic thin film DEDOC with J-aggregate type in a metal-dielectric microcavity to study the mechanism of strong photon-exction coupling. We design three microcavity with different thickness of space layer to control the detuning. By measuring the reflective spectrum and photoluminescence spectrum, we prove the mechanism of strong photon-exction coupling in microcavity, and confirm the polariton intensity distribution are in line with expectations.

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!