Bibliografie tematiche / Determinants of Manufacturing Development

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Determinants of Manufacturing Development"

Autore: Grafiati

Pubblicato: 14 marzo 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Determinants of Manufacturing Development".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Determinants of Manufacturing Development"

AIYEDOGBON, John O., e Sarah O. ANYANWU. "Macroeconomic Determinants of Industrial Development in Nigeria". Nile Journal of Business and Economics 1, n. 1 (7 marzo 2016): 37. http://dx.doi.org/10.20321/nilejbe.v1i1.44.

Testo completo

Abstract (sommario):

<p>The paper focuses on the impact of macroeconomic determinants on industrial productivity in Nigeria for the period, 1981-2013. It was discovered that while the Nigerian government had embarked on a number of industrial development strategies with the sole purpose of boasting industrial productivity in Nigeria, they seem to have yielded little or no result. The macroeconomic variables in the study include industrial production index, exchange rate, consumer price index, interest rate, broad money supply, foreign direct investment, credit to manufacturing sector and gross domestic product. The study employed OLS technique and found that exchange rate exert significant positive impact on industrial productivity in Nigeria. Also, the impact of interest rate, FDI and real GDP on industrial production index is positive. On the other hand, consumer price index, broad money supply and credit to manufacturing sector exert negative impact on industrial development in Nigeria. The paper recommended that a workable M2 that can enhance credit to manufacturing sector and at the same time control interest rate to boast investment should be determined.</p>

Gli stili APA, Harvard, Vancouver, ISO e altri

SMITH, Heather. "THE DETERMINANTS OF MANUFACTURING PROTECTION IN TAIWAN". Developing Economies 36, n. 3 (settembre 1998): 305–31. http://dx.doi.org/10.1111/j.1746-1049.1998.tb00221.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Söderbom, Måns, Francis Teal e Alan Harding. "The Determinants of Survival among African Manufacturing Firms". Economic Development and Cultural Change 54, n. 3 (aprile 2006): 533–55. http://dx.doi.org/10.1086/500030.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ismail, Rahmah, e Ragayah Haji Mat Zin. "Earnings Differentials Determinants Between Skills in the Malaysian Manufacturing Sector". Asian Economic Journal 17, n. 4 (dicembre 2003): 325–40. http://dx.doi.org/10.1111/j.1467-8381.2003.00189.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mukiwihando, Rynalto. "DETERMINANTS OF JAPAN MANUFACTURING EXPORT PERFORMANCE". E-Mabis: Jurnal Ekonomi Manajemen dan Bisnis 22, n. 1 (30 ottobre 2019): 174–85. http://dx.doi.org/10.29103/e-mabis.v20i2.438.

Testo completo

Abstract (sommario):

Export has been believed as an ultimate engine for economic growth. There are many tools to boost export performance. Among of them are foreign networks, RD activities and firms’ size. A bigger opportunity of overseas market, innovative products and competitive prices are the expected outcome of applying those aforementioned settings within the segmented businesses. This paper aims to obtain empirical insight of the factors that may influence export performance. Employing Japanese manufacturing sector export performance, as one of the leading industries in the world, the study explore the linkage between those three preceding factors to export performance improvement in Japan. Study results shows that research and development activities as well as firm’s size play critical roles within the improvement of Japanese manufacturing export performance. Whereas foreign networks, which denoted by foreign subsidiaries, has an insignificant positive contribution to export performance. Future studies may give in-depth focus on the foreign networks issues within a longer period of study. The implication of this study is addressing these two essential issues, RD activities and firms’ size, to the policy making processes in achieving optimal results of manufacturing export performance

Gli stili APA, Harvard, Vancouver, ISO e altri

Tu, Yu-Xia, Oleksandr Kubatko, Vladyslav Piven, Iryna Sotnyk e Tetiana Kurbatova. "Determinants of Renewable Energy Development: Evidence from the EU Countries". Energies 15, n. 19 (27 settembre 2022): 7093. http://dx.doi.org/10.3390/en15197093.

Testo completo

Abstract (sommario):

Sustainable development of the global economy can be achieved with the help of renewable energy (RE). The paper investigates the determinants of RE development in order to boost its adoption. The determinants of RE deployment were analyzed using random-effects GLS regression for the panel data from 27 EU member states in 2011–2020.The results confirm that economic development and high employment in advanced technology manufacturing are drivers of the RE sector, whereas unemployment growth affects RE deployment negatively. Our results show that active political participation and economic freedom promote RE; however, the level of corruption and democracy does not have a statistically significant impact on it. Favorable geographical location was proved to be a determinant of RE development. The hypothesis that plenty of natural resources discourage countries to develop RE was disproved. The major policy implications for RE promotion include the importance of economy deregulation, open market development and educational transformations. Following the results, prospects for further research were outlined.

Gli stili APA, Harvard, Vancouver, ISO e altri

Beeson, Patricia E., e Steven Husted. "PATTERNS AND DETERMINANTS OF PRODUCTIVE EFFICIENCY IN STATE MANUFACTURING*". Journal of Regional Science 29, n. 1 (febbraio 1989): 15–28. http://dx.doi.org/10.1111/j.1467-9787.1989.tb01219.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ghobakhloo, Morteza, Masood Fathi, Dalila Benedita Machado Martins Fontes e Ng Tan Ching. "Modeling lean manufacturing success". Journal of Modelling in Management 13, n. 4 (5 novembre 2018): 908–31. http://dx.doi.org/10.1108/jm2-03-2017-0025.

Testo completo

Abstract (sommario):

Purpose The purpose of this study is to contribute to the existing knowledge about the process of achieving Lean Manufacturing (LM) success. Design/methodology/approach This study uses interpretive structural modeling and captures the opinions of a group of LM experts from a world-class Japanese automobile manufacturer, to map the interrelationships among potential determinants of LM success. This study further uses the data from a survey of 122 leading automobile part manufacturers by performing structural equation modeling to empirically test the research model proposed. Findings Management support and commitment, financial resources availability, information technology competence for LM, human resources management, production process simplicity, supportive culture and supply chain-wide integration are the key determinants that directly or indirectly determine the level of achievement of LM success. Research limitations/implications The determinants of LM success as experienced by Asian automobile manufacturers might be different from determinants of LM success as experienced by Western automobile manufacturers. An interesting direction for future research would be to capture the experts’ inputs from Western automobile manufacturers to complement the findings of this study. Practical implications The practical contribution of this study lays in the development of linkages among various LM success determinants. Utility of the proposed interpretive structural modeling and structural equation modeling methodologies imposing order, direction and significance of the relationships among elements of LM success assumes considerable value to the decision-makers and LM practitioners. Originality/value Building on opinions of a group of LM experts and a case study of leading auto part manufacturers, the present study strives to model the success of LM, a topic that has received little attention to date.

Gli stili APA, Harvard, Vancouver, ISO e altri

Choi, Kate Koeun, e Seung-Hun Yu. "Empirical Study on New Product Development and the Corporate Value of Korean Export Manufacturing Firms". Korea International Trade Research Institute 18, n. 4 (31 agosto 2022): 73–93. http://dx.doi.org/10.16980/jitc.18.4.202208.73.

Testo completo

Abstract (sommario):

Purpose - The purpose of this paper is to examine the impact of new product development on corporate value, by analyzing the stock market response to the announcement of new product developments. Design/Methodology/Approach - Based on the event study methodology, the empirical analysis sampled 442 new product announcements made by 150 export manufacturing firms listed on the KOSPI and KOSDAQ markets in Korea, for the period 2001-2020. Findings - The results support the first hypothesis that the announcement of new product has a positive effect on abnormal returns. In terms of the determinant of the abnormal returns, the firm-specific variables investment opportunities and debt ratio were positively associated, and firm size and free cashflow variables were negatively related to abnormal returns. Being in a high-tech industry was found to have a positive impact. In terms of the Competitive Strategy Measure, the result supported the hypothesis that strategic substitute competition has a greater positive impact on the abnormal return of the announcing firms. R&D intensity and firm dominance were found to be insignificant. The magnitude of newness embedded in a new product was also found to be insignificant. Research Implications - This study further extends the existing literature in that it empirically tested the role of a new product on corporate value, and provides an empirical analysis of the determinants that affect the announcing firm’s abnormal returns gained in response to new product announcement, including firm-related variables and the competitive nature of the market.

Gli stili APA, Harvard, Vancouver, ISO e altri

MAC AN BHAIRD, Ciarán, e Declan CURRAN. "SECTORAL DIFFERENCES IN DETERMINANTS OF EXPORT INTENSITY". Journal of Business Economics and Management 17, n. 2 (8 aprile 2016): 299–313. http://dx.doi.org/10.3846/16111699.2015.1070196.

Testo completo

Abstract (sommario):

This study investigates firm characteristic determinants of export intensity in small firms. The originality of our approach is a comparative analysis of export intensity between firms in the computer software and manufacturing sectors, using a quasi-maximum likelihood estimation to test for the correct specification of the conditional mean model. Results indicate that larger, younger firms have greater export intensity in the computer software sector than in manufacturing. Research and development expenditure is equally important for export intensity in both sectors, but patent income is not significant. Sourcing managerial advice and expertise from the national development agency is important for firms in the manufacturing industry, but not for computer software firms. It is therefore important for export promotion organisations to publicise supports, as few small firms are aware of their availability. Our findings are especially valuable for policy makers concerned with low levels of export intensity among small firms.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Determinants of Manufacturing Development"

KIM, KYUNGSURK. "Tecnological Innovation in Korean Manufacturing Firms: Determinants and Effects". Doctoral thesis, Università Cattolica del Sacro Cuore, 2012. http://hdl.handle.net/10280/1492.

Testo completo

Abstract (sommario):

Sin dalla fine degli anni 90 la Corea ha iniziato a basare la propria strategia di sviluppo economico sull’importanza delgli investimenti in R&D e oggi il paese puo’ essere considerato tra i paesi OCSE con i maggiori tassi di investimento. Tale risultato e’ stato raggiunto principalmente attraverso una forte specializzazione nei settori ad alta intensita’ di tali investimenti. Ciononostante sono recentemente emersi alcuni problemi cruciali legati alle politiche per R&D. Tra gli altri la disoccupazione giovanile legata all’effetto labour-saving delle innovazioni, la forte specializzazione in industrie ad alta tecnologia, e l’eccessiva importanza attribuita alla ricerca. Le tre questioni vengono analizzate in questo lavoro utilizzando dati a livello di impresa. Il primo contributo tratta degli effetti di R&D sull’occupazione. Le evidenze suggeriscono che tale effetto e’ inesistente nelle imprese Coreane. Il secondo conributo prende in esame la produttivita’ degli investimenti in ricerca. I risultati mostrano che tali investimenti hanno effetti non solo sulle imprese ad alta tecnologia ma anche in altri settori. Nel terzo contributo si studia il comportamento innovativo delle imprese prestando attenzione alle imprese giovani. Per queste imprese, infatti, le evidenze mostrano che investimenti in ricerca fatti internamente non sono cosi’ importanti per la produzione di innovazione.
Since 1990s Korea has started to ground the strategy for economic growth upon the role of R&D and nowadays the country shall be considered among top R&D investors in the OECD countries. This result has been achieved mainly through strong specialization in R&D-intensive industries. Nonetheless some critical issues related to R&D policy have recently emerged; Among others the problem of youth unemployment related to the labour-saving effect of innovation, the excessive specialization in high-tech industries and the magnified importance attributed to R&D. The three issues are accordingly investigated in this work by using data at the firm level. The first contribution concerns the effect of R&D investments on employment. The aim of the work is to test for the existence of a labour-saving effect of R&D investments. The evidence suggests that such an effect does not characterize Korean firms. Second contribution examines the productivity of knowledge capital. The results indicate that R&D affects firms’ productivity not only in high-tech industries but also in other sectors. In the third contribution the innovative behavior of firms is studied paying attention to young firms. In these, in fact, the evidence reveals that internal R&D is not as important for the production of innovation.

Gli stili APA, Harvard, Vancouver, ISO e altri

KIM, KYUNGSURK. "Tecnological Innovation in Korean Manufacturing Firms: Determinants and Effects". Doctoral thesis, Università Cattolica del Sacro Cuore, 2012. http://hdl.handle.net/10280/1492.

Testo completo

Abstract (sommario):

Gli stili APA, Harvard, Vancouver, ISO e altri

Lim, Cheng Hwa. "Determinants of technological innovation : an exploratory study of the Asia-Pacific rim electronics manufacturing industry". Thesis, University of Strathclyde, 1997. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=26635.

Testo completo

Abstract (sommario):

The rapid progress of the Asia-Pacific rim countries during the past three decades has attracted world-wide attention, especially in the field of technological innovation. By the mid 1980's, researchers had acknowledged that the Asia-Pacific rim region had redefined the global balance of competition while at the same time, the western nations were suffering a decline in world market share. The perspective of the Asia-Pacific rim thinking tends to gravitate towards an endogenous model, where factors are more amenable to the influence of the organisation. An investigation by the World Bank on East Asia (including Japan, Korea, Taiwan, Singapore and Hong Kong) has uncovered emphatic evidence that the three dimensions propounded by Ohmae's model of people,finance and assets have been instrumental in enabling these economies "to acquire and master technology".This research explores the philosophy and strategic thinking of the Asia-Pacific rim electronics manufacturing industry with respect to the determinants of technological innovation. The study is divided into three major phases. The initial phase examines the respective strands of literature pertaining to the strategic issues of technological innovation. Special attention has been focused on the functional utilisation of people,finance and assets within the perspective of the Asia-Pacific rim electronics industry, leading to a broad-based framework for the study. Phase two is comprised of two main activities: the first involves exploratory interviews with four notable electronics companies and the second has entailed the gathering of data from 111 companies within the five Asia-Pacific rim countries (Japan, Korea, Singapore, Taiwan and Hong Kong) operating in Singapore and the United Kingdom, by means of a mailed questionnaire survey. Phase three involves qualitative as well as quantitative analyses where statistical methods such as one-way ANOVA, Chi-square test and t-tests have been undertaken to verify the data gathered from the primary research. The findings have uncovered that there are several determinants that are associated with the high rate of successful technological innovation in the sampled companies. For the people's dimension, there has been a high emphasis on training, resulting in a "nurtured" model of a worker, where numerous process innovations have been initiated by trained shop-floor technicians and engineers. At group working levels, various discussion groups (such as quality control circles and productivity discussion groups) have given rise to a collective learning process where shared knowledge enabled new products and processes to be innovated more rapidly than in the conventional departmentalised models. Other aspects of group dynamics has been the continuity (or smooth transition of innovative ideas) and good communications between functional groups thus acceleratingtechnological innovation. For the assets' dimension, the strategic foci have been shifted toautomation, flexible manufacturing process and increasing usage of information technology (including both computer hardware and software) so that new products can be brought to the market faster through the intelligent deployment of such assets and know-how. Finally, funds were found to have been allocated to expedite innovation through investment in R & D and staff training.

Gli stili APA, Harvard, Vancouver, ISO e altri

Becker, Bettina. "The determinants of investment in research and development in a panel of UK manufacturing industries". Thesis, Birkbeck (University of London), 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.428743.

Testo completo

Abstract (sommario):

This thesis attempts to identify some of the determinants of R&D investment in UK manufacturing industries in the 1990s, a decade in which R&D intensity in the UK declined. We begin with a summary of the key driving factors that emerge from the current empirical literature on R&D determinants, most of which has utilized firm level data. We then estimate an econometric panel model of R&D investment. Industry characteristics such as sales and profitability, product market competition, macroeconomic factors such as the real interest and exchange rates, and thecomposition of R&D expenditure and funding are found to be important. The thesis examines the sensitivity of the results to specification, functional form, and estimation method. In a next step, we acknowledge that the pooled estimates considered in our analysis and in most existing studies will not provide reliable estimates of individual effects when the parameters are heterogeneous. Moreover, they may not even be consistent estimates of the average in this case. Evidence from a principal components analysis suggests there may be significant differences between high-tech and low-tech R&D determinants, and hence we move on to test the validity of the pooling assumption in our panel. We find that government funding is significant only for low-tech R&D, whilst skilled labour and foreign R&D matter only in high-tech sectors. Foreign R&D accounts for a substantial amount of total R&D. Considering its impOliance, we move on to investigate its determinants. We find that this pmi of total R&D is sensitive to exchange rate unceliainty effects. Differences between the high-tech and low-tech components do not appear to be as robust for foreign R&D as for the total. We conclude this part with an account of the potential implications for the differences between the domestic and foreign parts of total R&D.

Gli stili APA, Harvard, Vancouver, ISO e altri

Wan, Jusoh Wan Jamaliah. "Determinants of success in new product development : an exploratory investigation of manufacturing companies in Malaysia". Thesis, University of Strathclyde, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301567.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rosique, Francisco. "The determinants of corporate growth". Thesis, University of St Andrews, 2010. http://hdl.handle.net/10023/918.

Testo completo

Abstract (sommario):

Corporate Growth is a concept that has been widely treated in a specific way or as part of strategy theories, in definition and in econometric models and has also been studied in many different aspects and approaches. The author describes in depth the main variables affecting corporate growth and the underlying business processes. This empirical research has focused on Sales, Profit-Cash Flow, Risk, Created Shareholder Value, Market Value and Overall Performance econometric models. These panel data models are based on the 500 Companies of the Standard & Poor’s 500. The methodology used has been very strict in identifying exogenous variables, walking through the different alternative econometric models, discussing results, and, in the end, describing the practical implications in today’s business corporate management. We basically assume that the Functions/Departments act independently in the same company, many times with different objectives, and in this situation clear processes are key to clarify the situations, roles and responsibilities. We also assume that growth implies interactions among the different functions in a company and the CEO acts to lead and coach his immediate Directors as a referee of the key conflicts through his Operating Mechanism. The objective of this PhD Dissertation is to clarify the business priorities and identify the most relevant variables in every process leading to the highest efficiency in reaching a sustainable and profitable growth. It covers the lack of academic studies on the nature and specific driving factors of corporate growth and provides a working framework for Entrepreneurs and Management leading to the Company’s success.

Gli stili APA, Harvard, Vancouver, ISO e altri

Teshome, Kagnew. "Production Transformation and Sectoral Engine of Growth Drive: a Comparative Exploration on Sub-Saharan Africa and Asian Economies". Doctoral thesis, Università di Siena, 2022. http://hdl.handle.net/11365/1212494.

Testo completo

Abstract (sommario):

The doctoral dissertation intends to explore the level and patterns of production transformation, centering the analysis on sample economies from East Asia, Southeast Asia, South Asia and SSA. It consists of seven parts. The general introduction gives outline of the research theme, claims (problem statement), objectives and research questions. It also introduces the motivation, content and contributions of each of the six parts to the dissertation. Part two intends to give conceptual discussions on production transformation and to review relevant theoretical strands on structural transformation and structural change. The aim is to grasp useful insights on how the dynamic evolution of the production structure of an economy towards the increasing returns sector (chiefly manufacturing) pertains to employment creation, cumulative productivity increases and sustainable development. As a continuation of part two, part three seeks to discuss sectoral role of growth, framing the analytical framework in favor of the dynamic synergetic relationship between sectors (which is related to the multi-sectoral multiplier approach). With the aim at contributing to the debate on sector-led development route and wealth creation in today’s low-income economies that failed to have their own industrialization imitating the advanced economies as well as to the debate on industrialization and service transformation, part three devotes to critically and thoroughly review the tenet of the different theoretical strands (past and present) on engine of growth hypothesis. It contributes to the industrialization or the production transformation and development literature by synthesizing the role of manufacturing and other sectors (agriculture and services) to economic development and poverty reduction in the developing economies context in SSA and Asia. The lengthy discussion of part three vindicated the existence of a synergetic relation between economic sectors and production activities [and the “stimulus complement” role of services to manufacturing] through addressing hosts of questions. The remaining parts of the dissertation were intended to validate the proposed synergetic relationship between economic sectors as well as the “stimulus complement” role of services to manufacturing rather than substitute to it. The possibility for synergetic relationship between manufacturing and services activities in the transformation and development process has been missing or received very little attention in the debate hitherto – advocates of each sector completely ignore or place little focus on the existence of a dynamic synergetic relationship between them. The dissertation calls for synergy because everything is interconnected in the economic system. One cannot discuss about development without acknowledging structural heterogeneity of the economy. So, it is difficult to separately discuss or define anything clearly; difficult to draw stylized fact with respect to sectoral role in economic transformation and development process that is clear and accepted by all. This is simply because synergy by its conception involves logging a middle course between polarized ideas (extremes). In short, synergy rejects extremes and often calls for the ‘middle way,’ neither too far to the right nor to the left. Often the truth in real world production is neither one alternative nor the other but both. Choosing synergy generally requires one to accept ambiguity, uncertainty, mystery and paradox. For instance, manufacturing has indispensable role in the economy; but, agriculture should not be marginalize and belittled, nor services be ignored. The economy needs both, despite manufacturing conventionally has special place to play pivotal role than others.

Gli stili APA, Harvard, Vancouver, ISO e altri

Mwiinga, Mwiinga. "Determinants of exports in Zambia’s Manufacturing Sector". Thesis, University Of Cape Town, 2018. http://hdl.handle.net/11427/29942.

Testo completo

Abstract (sommario):

The cyclical price movements of primary products exported from Zambia has placed the country at a disadvantage. This stems mainly from the fact that lower prices of primary commodities have had negative effects on the balance of payments and the developmental agenda of the Zambian government. It is therefore important that efforts are made by the government to move towards supporting product sophistication, primarily focusing on the growth of industries that offer the greatest possible impact. In this regard, the growth of the manufacturing sector becomes of the utmost importance. This is mainly because the more the manufacturing sector is developed, the greater the technological transfer which will in turn facilitate product sophistication. This will also mitigate the dependency on exports of primary commodities such as copper, and make the economy less susceptible to cyclical price movements of primary commodities. It was therefore important that the study investigated the determinants of export performance in Zambia’s manufacturing sector. Variables analysed included Foreign Direct Investment (FDI), inflation rate, exchange rate, Gross Domestic Product (GDP) and lending rates. The study utilised the Ordinary Least Square (OLS) and the Auto Regressive Distributive Lag techniques to capture the dynamic relationships. The results revealed that Inflation and FDI were statistically significant. It was further observed that inflation was negatively related to exports in manufacturing sector. FDI, on the other hand, was positively related to exports in the manufacturing sector in the long run. GDP and lending rates were statistically insignificant, which could be as a result of the openness of the economy and low productive capacity. One of the key recommendations made was for government to effectively manage its policies in a way that maximises FDI inflows, whilst minimising inflation to effectively create a favourable macroeconomic environment for the sustained growth of the manufacturing sector. It was further observed that FDI, GDP and Inflation rate jointly affected exports in the manufacturing sector, therefore confirming that the three variables do have a joint effect on exports in the long run.

Gli stili APA, Harvard, Vancouver, ISO e altri

Matraves, Catherine. "The determinants of market structure in manufacturing industry". Thesis, University of East Anglia, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320835.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Baskaya, B. Z. "Major determinants of private manufacturing investment in Turkey". Thesis, University of Bath, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371235.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Determinants of Manufacturing Development"

Huang, Yongfu. Determinants of Financial Development. London: Palgrave Macmillan UK, 2011. http://dx.doi.org/10.1057/9780230302495.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Huang, Yongfu. Determinants of Financial Development. Basingstoke: Springer Nature, 2010.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Determinants of financial development. Basingstoke, Hampshire: Palgrave Macmillan, 2011.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Walker, David W., a cura di. Prenatal and Postnatal Determinants of Development. New York, NY: Springer New York, 2016. http://dx.doi.org/10.1007/978-1-4939-3014-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

J, Barro Robert. International determinants of religiosity. Cambridge, Mass: National Bureau of Economic Research, 2003.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

S, Oosterbaan M., Ruyter van Steveninck, Thijs de e Windt, N. van der (Nico), a cura di. The determinants of economic growth. Boston: Kluwer Academic Publishers, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

A, Krasnegor Norman, a cura di. Biological and behavioral determinants of language development. Hillsdale, N.J: L. Erlbaum, 1991.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dinwoodie, Thomas L. PowerGuard California: Advanced manufacturing development. [Sacramento]: California Energy Commission, 2002.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bolling, G. Fredric. The art of manufacturing development. Aldershot: Gower Publishing Company, 1994.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

The art of manufacturing development. Aldershot, Hampshire, England: Gower, 1994.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Determinants of Manufacturing Development"

Roy, Sudeshna, Nipu Modak e Pranab K. Dan. "Determinants of Sustainable New Product Development and Their Impacts in Manufacturing Companies". In Waste Management as Economic Industry Towards Circular Economy, 37–47. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1620-7_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Thompson, Pauline B., e Kerry Taylor. "Determinants of Health". In Sustainable Development Goals Series, 137–64. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-76849-2_7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ong, Ken K. "Early Determinants of Obesity". In Adipose Tissue Development, 53–61. Basel: KARGER, 2010. http://dx.doi.org/10.1159/000316897.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hill, Terry. "Manufacturing Infrastructure Development". In Manufacturing Strategy, 212–65. London: Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-22664-1_7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hill, Terry. "Manufacturing infrastructure development". In Manufacturing Strategy, 244–87. London: Macmillan Education UK, 1995. http://dx.doi.org/10.1007/978-1-349-13724-4_10.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hill, Terry. "Manufacturing Infrastructure Development". In Manufacturing Strategy, 235–71. London: Macmillan Education UK, 2000. http://dx.doi.org/10.1007/978-1-349-14018-3_10.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kempf, Simon. "Office Rent Determinants". In Development of Hedonic Ofﬁce Rent Indices, 71–148. Wiesbaden: Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-11170-0_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Swarup, Biswa. "Determinants of productivity". In Development and Economic Growth in India, 103–15. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003278351-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Felder, Johannes, Georg Licht, Eric Nerlinger e Harald Stahl. "Factors Determining R&D and Innovation Expenditure in German Manufacturing Industries". In Determinants of Innovation, 125–54. London: Palgrave Macmillan UK, 1996. http://dx.doi.org/10.1007/978-1-349-13917-0_5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Young, Gerald. "Causes and Determinants of Behavior". In Development and Causality, 657–79. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9422-6_29.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Determinants of Manufacturing Development"

Pawłowski, Krystian. "The Market Conditions Based Taxonomy of Modern Manufacturing Practices". In Applied Human Factors and Ergonomics Conference. AHFE International, 2020. http://dx.doi.org/10.54941/ahfe100435.

Testo completo

Abstract (sommario):

The subject of research is the taxonomy of modern methods and techniques of management. Management methods and their classification have always been the subject of research in both theoretical aspect (defining logical relationships in an organized set of methods) and empirical aspect (verifying their practical application). Empirical studies have been conducted multiple times in various countries. The objective of research was most frequently: the goals (reasons) for implementation, and the actual extent and results of the implementation. The purpose of this article is to present the results of research on the taxonomy of modern management methods in the context of situational determinants of enterprises in the process of implementing these methods. Such formulated problem is a result of a belief that the selection of modern methods of management in companies is subjected to both internal and external situational determinants. In my research I intend to test the hypothesis that an important factor for the company situational determinants is that company’s market orientation. The research process is divided into two phases: 1. Phase of the literature study and preparation of methodology for empirical research, 2 Empirical research and development of results. This article summarizes the results of the literature study and the main assumptions of the model of empirical research, which will be carried out at the beginning of 2014. The scope of the research includes 39 methods and techniques of management.

Gli stili APA, Harvard, Vancouver, ISO e altri

BRODZIŃSKI, Zbigniew, e Krystyna KUROWSKA. "THE ISSUES OF GREEN ECONOMY INNOVATIVENESS". In RURAL DEVELOPMENT. Aleksandras Stulginskis University, 2018. http://dx.doi.org/10.15544/rd.2017.144.

Testo completo

Abstract (sommario):

Broadly speaking, the green economy involves pro-environmental products and services, investments, economy sectors, public procurement contracts, and jobs. This is a new idea, both in terms of regulations supporting its development and of practical effects of the implementation of technologies and organisational solutions aimed at the protection of natural environment. The possibility for obtaining new jobs thanks to the support of the green economy is the focus of various decision-making centres. The problem, however, is the lack of a thorough understanding of the potential existing in the developing green job market, particularly in rural areas, which hampers taking efficient measures. The aim of the study was to indicate the determinants of and opportunities for the development of the green economy and green jobs in sectors related to the rural economy. The opinions presented in the study were obtained through interviews from a randomly selected group of 578 managers of “green economy”-related businesses operating in rural areas. The study participants are entrepreneurs employing workers and creating jobs in the following areas: agri-food processing, services, manufacturing, renewable energy sources, and tourism. It can be concluded that, inter alia, despite the difficult situation in the labour market, and the problems with sales of products and services in the green economy sector, it should be expected that in the next few (3 to 5) years, the social demand for innovative products/services of this sector will increase.

Gli stili APA, Harvard, Vancouver, ISO e altri

Shen, Guangxian, Yongjiang Zheng e Ming Li. "Development of Statically Determinate Plate Rolling Mills Based on Micro-Scale Parameters". In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7311.

Testo completo

Abstract (sommario):

Contemporary plate rolling mills and pinch pass mills, which are unstable during the rolling process, are all statically indeterminate structures influenced by micro-scale parameters. The micro-scale parameters include bending deformations of the rolls and the side clearances between the chocks and the side surfaces of the housing window. All these are less than 1 mm, and they have an important effect on the skeletal structure of the roll systems of the mill. If the influence of micro-scale parameters is not considered in the design of the rolling mill, the skeletal structure of the roll system is incomplete and lacks kinematic links and pairs. The statically indeterminate nature of traditional rolling mills results in numerous disadvantages, including the frequent burning loss of the end-thrust bearing caused by excessive axial forces, the lateral movement of the strip owing to the deviation of the rolling load acting on the both ends of backup roll, the short service life of the four-row radial roller bearings on the back-up roll, and the quality of product tends to deteriorate due to the unstable operation of the control system, to mention a few. Because of the flattening effect between the rolls, the setting of the offset distance does not achieve the desired purpose and leads to the deviation of rolling load due to the asymmetric cross between the roll axes. To alleviate the above shortcomings, a new type of rolling mill with a statically determinate structure in which the horizontal offset distance between the roll axes is set to zero is thus proposed. In order to keep the rolls parallel and prevent cross between the rolls, a thrust device is designed, which also ensures sufficient free space to allow convenient roll replacement and allow for the thermal expansion of the chocks. In addition, back-up roll systems with component force bases as well as intermediate roll systems are designed in accordance with the theory of statically determinate characteristics with micro-scale parameters.

Gli stili APA, Harvard, Vancouver, ISO e altri

Diering, Magdalena, e Agnieszka Kujawińska. "Human Aspects of the Measurement System Analysis". In Applied Human Factors and Ergonomics Conference. AHFE International, 2020. http://dx.doi.org/10.54941/ahfe100447.

Testo completo

Abstract (sommario):

Quality control in manufacturing process means checking the consistency of the process or product with the internal or external customer requirements. Most often it is done by direct measurement or observation. The main objective of the quality control is to increase the chance that the product (process) is free from defects when passing it on further stages of the production process or on to use. It is difficult to find the type of industry, which is not performed by the demands resulting from quality control. In many industries, quality control plays a special role, especially where the manufacturing outcome is important for the client. The pharmaceutical and medical industries are examples of a situation in which quality status of manufacturing process has a direct impact on the patients health and even – in some cases – their lives. Alternative control is a special case of quality control. It can be performed by measuring or checking and classifying the object (product) into one of a number of states (in the specific case – into one of two, for example: good/bad or OK/No OK). Alternative quality control may be carried out with – for example – use of specialized equipment that automatically classify the items (for example, with use of machine with pattern recognition module to verify circuit boards or machine for printing color evaluation) or with the use of human senses (as visual control, control), man knowledge and his experience (know-how). To assure that quality control of manufacturing is a reliable process and its outcomes are on accepted level, measurement system must be evaluated (variation of the measurement system should be known and accepted). There are many procedures to assess the capability and reliability of measurement system. The most common and widely used procedure to assess alternative measurement system is – on the base of authors experience – KAPPA method. It allows to assess the impact of factors such as: human factors, instrument/gauge, environment etc. on the reliability of the control.The paper presents some possible directions of development of attribute measurement systems procedures. These challenges derive from need to assess the impact of factors related to the determinants of human psychophysical on the results of the statistical evaluation of measurement systems.

Gli stili APA, Harvard, Vancouver, ISO e altri

Sobanke, Victor Oluwasina. "Determinants of Manpower Utilisation in Manufacturing Firms". In 2022 IEEE 28th International Conference on Engineering, Technology and Innovation (ICE/ITMC) & 31st International Association For Management of Technology (IAMOT) Joint Conference. IEEE, 2022. http://dx.doi.org/10.1109/ice/itmc-iamot55089.2022.10033298.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Sukhinina, Anastasia, e Ekaterina Koroleva. "Determinants of FinTech performance". In DTMIS '20: International Scientific Conference - Digital Transformation on Manufacturing, Infrastructure and Service. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3446434.3446514.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ivleva, Marina L., Vitaly Yu Ivlev, Vladimir Inozemtsev e Nonna Bagramiants. "Environmental Determinants of Sustainable Development". In Proceedings of the 2nd International Conference on Contemporary Education, Social Sciences and Ecological Studies (CESSES 2019). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/cesses-19.2019.243.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Lesakova, Dagmar. "DETERMINANTS OF CUSTOMER RELATIONSHIP DEVELOPMENT". In 5th Economics & Finance Conference, Miami. International Institute of Social and Economic Sciences, 2016. http://dx.doi.org/10.20472/efc.2016.005.014.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Łuczyszyn, Tomasz. "Territory, territorialisation as development determinants". In Actual question of management of sustainable development in today’s society: problems and prospects. Kremenchuk Mykhailo Ostrohradskyi National University, 2021. http://dx.doi.org/10.30929/2227-3549.2021.10.85-89.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hanim, Hamdan, e Saraih Ummi Naiemah. "Determinants of women leadership in the Malaysian manufacturing industry". In PROCEEDINGS OF GREEN DESIGN AND MANUFACTURE 2020. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0044183.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Determinants of Manufacturing Development"

Coughlin, Cletus C., e Eran Segev. Location Determinants of New Foreign-Owned Manufacturing Plants. Federal Reserve Bank of St. Louis, 1997. http://dx.doi.org/10.20955/wp.1997.018.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

EASON, H. A. REGIONAL MANUFACTURING TECHNICAL DEVELOPMENT. Office of Scientific and Technical Information (OSTI), febbraio 1997. http://dx.doi.org/10.2172/2747.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

SYNTRONICS INC DAYTON OH. Agile Manufacturing Development of Castings. Fort Belvoir, VA: Defense Technical Information Center, settembre 2000. http://dx.doi.org/10.21236/ada389127.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Pujari, V. K. Development of Advanced Ceramic Manufacturing Technology. Office of Scientific and Technical Information (OSTI), aprile 2001. http://dx.doi.org/10.2172/814138.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Robinson, S. Ceramic component manufacturing process development. Final report. Office of Scientific and Technical Information (OSTI), settembre 1996. http://dx.doi.org/10.2172/437695.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Liu, Xuepeng, Aaditya Mattoo, Zhi Wang e Shang-Jin Wei. Services Development and Comparative Advantage in Manufacturing. Cambridge, MA: National Bureau of Economic Research, dicembre 2019. http://dx.doi.org/10.3386/w26542.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Krishnamurthy, Kasthurirangan, Michael J. Iulian e PCharles McLean. Development of manufacturing systems models using VRML. Gaithersburg, MD: National Institute of Standards and Technology, 1997. http://dx.doi.org/10.6028/nist.ir.6093.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Durkin, Dennis. Manufacturing Process Development For the OCSW Warhead. Fort Belvoir, VA: Defense Technical Information Center, agosto 2001. http://dx.doi.org/10.21236/ada385925.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Chrzanowsk, J. H., P. J. Fogarty, P. J. Heitzenroeder, T. Meighan, B. Nelson, S. Raftopoulos e D. Williamson. Manufacturing Development of the NCSX Modular Coil Windings. Office of Scientific and Technical Information (OSTI), settembre 2005. http://dx.doi.org/10.2172/899520.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hamilton, Bruce. U.S. Offshore Wind Manufacturing and Supply Chain Development. Office of Scientific and Technical Information (OSTI), febbraio 2013. http://dx.doi.org/10.2172/1219845.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!